aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/cpu/mpc85xx
Commit message (Collapse)AuthorAgeFilesLines
* fsl_qe: Drop common.hTom Rini2023-11-071-1/+0
| | | | | | | In both include/fsl_qe.h and then also remove common.h from the files which had included fsl_qe.h Signed-off-by: Tom Rini <trini@konsulko.com>
* mpc85xx: relocate code in non-SPL buildMartin Fäcknitz2023-10-281-1/+1
| | | | | | | | | | When building a non-SPL image, relocation is needed. This patch restores the old behaviour before commit b35316fb67cb ("Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig") was only defined if CONFIG_SPL_BUILD was defined. Fixes: b35316fb67cb ("Convert CONFIG_SPL_INIT_MINIMAL et al to Kconfig") Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
* spl: Use SYS_MALLOC_F instead of SYS_MALLOC_F_LENSimon Glass2023-10-061-2/+2
| | | | | | | | Use the new SPL/TPL/VPL_SYS_MALLOC_F symbols to determine whether the malloc pool exists. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <sean.anderson@seco.com>
* global: Finish CONFIG -> CFG migrationTom Rini2023-01-203-36/+36
| | | | | | | | | | | | | At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* nxp: Finish migration of SYS_FSL_SRDS_[12] to KconfigTom Rini2023-01-201-3/+9
| | | | | | | | As this is used on both ARM and PowerPC platforms, this needs to be listed in arch/Kconfig.nxp and match how they're currently used by select'ing them under the required PowerPC ARCH_xxx options. Signed-off-by: Tom Rini <trini@konsulko.com>
* global: Remove unused CONFIG definesTom Rini2023-01-201-3/+1
| | | | | | | Remove some CONFIG symbols and related comments, etc, that are unused within the code itself at this point. Signed-off-by: Tom Rini <trini@konsulko.com>
* event: Correct dependencies on the EVENT frameworkTom Rini2023-01-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The event framework is just that, a framework. Enabling it by itself does nothing, so we shouldn't ask the user about it. Reword (and correct typos) around this the option and help text. This also applies to DM_EVENT and EVENT_DYNAMIC. Only EVENT_DEBUG and CMD_EVENT should be visible to the user to select, when EVENT is selected. With this, it's time to address the larger problems. When functionality uses events, typically via EVENT_SPY, the appropriate framework then must be select'd and NOT imply'd. As the functionality will cease to work (and so, platforms will fail to boot) this is non-optional and where select is appropriate. Audit the current users of EVENT_SPY to have a more fine-grained approach to select'ing the framework where used. Also ensure the current users of event_register and also select EVENT_DYNAMIC. Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Reported-by: Oliver Graute <Oliver.Graute@kococonnector.com> Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com> Fixes: 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events") Fixes: 42fdcebf859f ("event: Convert misc_init_f() to use events") Fixes: c5ef2025579e ("dm: fix DM_EVENT dependencies") Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Fabio Estevam <festevam@denx.de>
* Merge branch 'next'Tom Rini2023-01-0926-249/+285
|\ | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com>
| * global: Migrate CONFIG_WATCHDOG_PRESC et al to CFGTom Rini2022-12-231-1/+1
| | | | | | | | | | | | | | | | Perform simple renames of: CONFIG_WATCHDOG_PRESC to CFG_WATCHDOG_PRESC CONFIG_WATCHDOG_RC to CFG_WATCHDOG_RC Signed-off-by: Tom Rini <trini@konsulko.com>
| * global: Migrate CONFIG_RESET_VECTOR_ADDRESS to CFGTom Rini2022-12-232-3/+3
| | | | | | | | | | | | Perform a simple rename of CONFIG_RESET_VECTOR_ADDRESS to CFG_RESET_VECTOR_ADDRESS Signed-off-by: Tom Rini <trini@konsulko.com>
| * global: Migrate CONFIG_QBMAN_CLK_DIV to CFGTom Rini2022-12-231-3/+3
| | | | | | | | | | | | Perform a simple rename of CONFIG_QBMAN_CLK_DIV to CFG_QBMAN_CLK_DIV Signed-off-by: Tom Rini <trini@konsulko.com>
| * global: Migrate CONFIG_PME_PLAT_CLK_DIV to CFGTom Rini2022-12-231-3/+3
| | | | | | | | | | | | Perform a simple rename of CONFIG_PME_PLAT_CLK_DIV to CFG_PME_PLAT_CLK_DIV Signed-off-by: Tom Rini <trini@konsulko.com>
| * global: Migrate CONFIG_MAX_MEM_MAPPED to CFGTom Rini2022-12-233-13/+13
| | | | | | | | | | | | Perform a simple rename of CONFIG_MAX_MEM_MAPPED to CFG_MAX_MEM_MAPPED Signed-off-by: Tom Rini <trini@konsulko.com>
| * global: Migrate CONFIG_FM_PLAT_CLK_DIV to CFGTom Rini2022-12-231-3/+3
| | | | | | | | | | | | Perform a simple rename of CONFIG_FM_PLAT_CLK_DIV to CFG_FM_PLAT_CLK_DIV Signed-off-by: Tom Rini <trini@konsulko.com>
| * T104xRDB: Remove non-TARGET_T1042D4RDB variantsTom Rini2022-12-221-17/+0
| | | | | | | | | | | | | | At this point only the TARGET_T1042D4RDB variant of this is supported in tree, so remove the remaining parts of the other platforms. Signed-off-by: Tom Rini <trini@konsulko.com>
| * powerpc: Migrate CONFIG_PPC_SPINTABLE_COMPATIBLE to KconfigTom Rini2022-12-221-0/+13
| | | | | | | | | | | | | | | | | | Move this symbol to Kconfig, and preserve the current behavior. The help text here comes from where the relevant code is implemented and it is quite likely at this point in time we could either disable this option or at least make it configurable. Signed-off-by: Tom Rini <trini@konsulko.com>
| * Convert CONFIG_L2_CACHE to KconfigTom Rini2022-12-221-0/+3
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_L2_CACHE Signed-off-by: Tom Rini <trini@konsulko.com>
| * Convert CONFIG_FLASH_SPANSION_S29WS_N et al to KconfigTom Rini2022-12-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FSL_FM_10GEC_REGULAR_NOTATION CONFIG_FSL_ISBC_KEY_EXT CONFIG_FSL_TRUST_ARCH_v1 CONFIG_FSL_SDHC_V2_3 CONFIG_MAX_DSP_CPUS CONFIG_MIU_2BIT_INTERLEAVED CONFIG_SERIAL_BOOT CONFIG_SPI_BOOTING CONFIG_X86EMU_RAW_IO Signed-off-by: Tom Rini <trini@konsulko.com>
| * powerpc: fix fdt_fixup_liodn_tbl_fman()Heinrich Schuchardt2022-12-061-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Builiding with GCC 12.2 fails: arch/powerpc/cpu/mpc85xx/liodn.c: In function 'fdt_fixup_liodn_tbl_fman': arch/powerpc/cpu/mpc85xx/liodn.c:340:35: error: the comparison will always evaluate as 'false' for the address of 'compat' will never be NULL [-Werror=address] 340 | if (tbl[i].compat == NULL) | Remove the superfluous check. Fixes: 97a8d010e029 ("net/fman: Support both new and legacy FMan Compatibles") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
| * post: Migrate to KconfigTom Rini2022-12-051-1/+1
| | | | | | | | | | | | | | | | We move the existing CONFIG_POST_* functionality over to CFG_POST and then introduce CONFIG_POST to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini2022-12-0522-177/+177
| | | | | | | | | | | | | | | | | | | | The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini2022-12-052-2/+2
| | | | | | | | | | | | | | | | | | | | The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * Convert CONFIG_SYS_PMAN et al to KconfigTom Rini2022-12-051-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_NOBQFMAN CONFIG_SYS_DPAA_DCE CONFIG_SYS_DPAA_FMAN CONFIG_SYS_DPAA_PME CONFIG_SYS_DPAA_RMAN CONFIG_SYS_PMAN Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * global: Move remaining CONFIG_SYS_PCI* to CFG_SYS_PCI*Tom Rini2022-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_PCI and CONFIG_SYS_PCIE namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * global: Move remaining CONFIG_SYS_NUM_* to CFG_SYS_NUM_*Tom Rini2022-12-059-19/+19
| | | | | | | | | | | | | | | | | | | | The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NUM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * global: Move remaining CONFIG_SYS_NS16550_* to CFG_SYS_NS16550_*Tom Rini2022-12-051-6/+6
| | | | | | | | | | | | | | | | | | | | The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_NS16550 namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | powerpc/mpc85xx: socrates: Re-enable building u-boot-socrates.binPali Rohár2023-01-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot build system builds final U-Boot binary for socrates board in custom file u-boot-socrates.bin (instead of standard u-boot.bin). Output target file u-boot-socrates.bin is generated by binman as defined in board binman config file arch/powerpc/dts/socrates-u-boot.dtsi. But binman was disabled in commit 5af42eafd7e1 ("Makefile: Reduce usage of custom mpc85xx u-boot.bin target") for all mpc85xx boards which do not use standard powerpc binman config file arch/powerpc/dts/u-boot.dtsi and boards which do not require binman at all. The only such mpc85xx board is socrates. So since that commit, U-Boot does not final binary for socrates board anymore. Fix this issue by re-enabling binman for socrates board. And build process starts again producing u-boot-socrates.bin binary. Note that build process for this socrates board always produce u-boot.bin binary which is broken and not usable for socrates board. Long term solution should be to disable building broken binary u-boot.bin and then renaming u-boot-socrates.bin to u-boot.bin, or switching to use common powerpc binman config file arch/powerpc/dts/socrates-u-boot.dtsi (if it is possible). Fixes: 5af42eafd7e1 ("Makefile: Reduce usage of custom mpc85xx u-boot.bin target") Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Heiko Schocher <hs@denx.de>
* | PowerPC: Update dependencies on *SYS_MPC85XX_NO_RESETVECTom Rini2022-12-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In 96699f097a02 ("powerpc: mpc85xx: Use binman to embed dtb inside U-Boot") we introduce CONFIG_MPC85XX_HAVE_RESET_VECTOR and do so via Kconfig. However, much later in de47ff536363 ("Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig") I converted the symbol that is the inverse of this to Kconfig. This should have included a dependency on the first symbol as they are logically opposite. The dependency being missing lead to some platforms being broken at runtime due to discarding the require reset vector. Fixes: de47ff536363 ("Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig") Reported-by: Pali Rohár <pali@kernel.org> Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Pali Rohár <pali@kernel.org>
* | powerpc/mpc85xx: Disable AltiVec and VSX instructionsPali Rohár2022-12-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | All vector instructions on powerpc mpc85xx must not be used because U-Boot does not enable them. Usage cause random crashes. SPE vector instructions are already disabled by compiler flags, so disable also AltiVec and VSX vector instructions. Linux kernel disables AltiVec and VSX instructions too. Signed-off-by: Pali Rohár <pali@kernel.org>
* | powerpc/mpc85xx: Improve disabling of SPE instructionsPali Rohár2022-12-221-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifying -mspe=no also disables usage of SPE instructions. It is documented in "[PATCH,rs6000] make -mno-spe work as expected" email: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html So replace -mspe=yes by -mspe=no, so make it clear that u-boot has to be compiled without SPE instructions. Linux kernel contains following Makefile code to achieve it: # No SPE instruction when building kernel # (We use all available options to help semi-broken compilers) KBUILD_CFLAGS += $(call cc-option,-mno-spe) KBUILD_CFLAGS += $(call cc-option,-mspe=no) Do same for U-Boot. Signed-off-by: Pali Rohár <pali@kernel.org>
* | powerpc/mpc85xx: Pass correct cpu compiler flagsPali Rohár2022-12-221-1/+11
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When gcc's default cpu (selected by --with-cpu= during gcc's configure phase) does not match target U-Boot board cpu then U-Boot binary does not have to be compiled correctly. Lot of distributions sets gcc's default cpu to generic powerpc variant which works fine. U-Boot already pass -Wa,-me500 flag to gcc which instructs GNU AS to accept e500 specific instructions when processing assembler source files (.S). This affects also assembly files generated by gcc from C source files. And because gcc for generic powerpc cpu puts '.machine ppc' at the beginning of the generated assembly file, it basically overwrites -me500 flag by which was GNU AS invoked (from U-boot build system). It started to be an issue since binutils 2.38 which does not keep enabled extra functional units selected by previous cpu. Hence issuing directive '.machine ppc' (generated by gcc for generic powerpc) after '.machine e500' (specifying at command line) disables usage of e500 specific instructions. And compiling arch/powerpc/cpu/mpc85xx/tlb.c code throws following assembler errors: {standard input}: Assembler messages: {standard input}:127: Error: unrecognized opcode: `tlbre' {standard input}:418: Error: unrecognized opcode: `tlbre' {standard input}:821: Error: unrecognized opcode: `msync' {standard input}:821: Error: unrecognized opcode: `tlbwe' {standard input}:884: Error: unrecognized opcode: `tlbsx' This issue was already hit by Debian people and is reported in bug tracker: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1003490 Calling gcc with -mcpu=8540 flag fixes this issue because -mcpu=8540 tells gcc to compile code for e500 core/cpu (overwriting gcc's default cpu) and does not put '.machine ppc' directive into assembly anymore. Also if gcc is invoked with -mcpu=8540 then it pass -me500 flag to GNU AS. So it is unnecessary to manually specify -Wa,-me500 flag because it is implicitly added. Fix this issue properly by specifying correct -mcpu compiler flag for all supported powerpc cores in U-Boot mpc85xx platform, which are: e500v1, e500v2, e500mc, e5500 and e6500. For specifying e500v1 and e500v2 cores, gcc has unintuitive -mcpu=8540 and -mcpu=8548 flag names, for other cores -mcpu matches core name. The only difference between gcc's -mcpu=8540 and -mcpu=8548 flags is support for double precision floating point SPE instructions. As U-Boot does not use floating point, it is fine to use -mcpu=8540 for both e500v1 and e500v2 cores. Moreover gcc 9 completely removed e500 floating point support, so since gcc 9 -mcpu=8548 is just alias to -mcpu=8540. Note that U-Boot's CONFIG_E500 option is set also for other cpus, not only for e500v1 and e500v2. So do not check for CONFIG_E500 and rather set e500 as last fallback value when no other mpc85xx cpu matches. Signed-off-by: Pali Rohár <pali@kernel.org>
* global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespaceTom Rini2022-11-1010-48/+48
| | | | | | | Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* global: Migrate CONFIG_SYS_MPC8* symbols to the CFG_SYS namespaceTom Rini2022-11-1022-58/+58
| | | | | | Migrate all of COFIG_SYS_MPC* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com>
* powerpc: Migrate SYS_L3_SIZE to KconfigTom Rini2022-11-101-0/+24
| | | | | | | | Introduce three options, one for each observed L3 cache size, and have the size select'd as needed. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* powerpc: Migrate SYS_L2_SIZE to KconfigTom Rini2022-11-101-0/+16
| | | | | | | | Introduce two options, one for each observed L2 cache size, and have the size select'd as needed. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* treewide: Remove the unnecessary space before semicolonBin Meng2022-11-027-13/+13
| | | | | | %s/return ;/return; Signed-off-by: Bin Meng <bmeng@tinylab.org>
* Rename CONFIG_SYS_TEXT_BASE to CONFIG_TEXT_BASESimon Glass2022-10-312-3/+3
| | | | | | | | | The current name is inconsistent with SPL which uses CONFIG_SPL_TEXT_BASE and this makes it imposible to use CONFIG_VAL(). Rename it to resolve this problem. Signed-off-by: Simon Glass <sjg@chromium.org>
* powerpc/mpc85xx: Fix re-align of unmapped DDR memory message for non-SPL buildsPali Rohár2022-09-231-0/+3
| | | | | | | | During init_dram() is called also setup_ddr_tlbs_phys() function which may print message about unmapped DDR memory. So in this case print also re-aligning filler after unmapped DDR memory message. Signed-off-by: Pali Rohár <pali@kernel.org>
* powerpc/mpc85xx: Explain TLB unmapped memory messagePali Rohár2022-09-231-1/+1
| | | | | | | | | Currently U-Boot SPL prints just generic message "2 GiB left unmapped". Change it to more detailed "2 GiB of DDR memory left unmapped in U-Boot". This is just U-Boot configuration and operating system may map more (or also less) memory. Signed-off-by: Pali Rohár <pali@kernel.org>
* powerpc: mpc85xx: Fix incorrect application of patchMarek Behún2022-09-191-3/+3
| | | | | | | | | | | | | | | | | | I messed up application of patch 5a428e751044 ("mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS"). I took it from a work-in-progress branch where I changed usage of CONFIG_SDCARD to CONFIG_SD_BOOT and refactored SYS_MPC85XX_NO_RESETVEC mess. But these changes aren't in master yet. Fix the wrong usage of these macros. Fixes: 5a428e751044 ("mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Pali Rohár <pali@kernel.org>
* mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFSPali Rohár2022-09-161-0/+10
| | | | | | | | | | | | | | | | When fixed offset via CONFIG_SYS_MMC_U_BOOT_OFFS is not specified then expects that U-Boot proper is placed immediately after SPL without any additional padding. This allows to generate smaller SPL+U-Boot final binary as it is not required to specify fixed offset to U-Boot proper at SPL compile time. In this case offset to U-Boot proper is calculated at SPL compile time in linker script. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Marek Behún <kabel@kernel.org>
* powerpc: mpc85xx: Fix loading U-Boot proper from SD card in SPLPali Rohár2022-09-161-1/+1
| | | | | | | | | | | | | | | Change 8-byte alignment of SPL binary to just 4-byte alignment as objcopy trims trailing zero bytes when converting ELF file to RAW binary. This is same fix for SPL linker script as was done fix for U-Boot linker script in commit e8c0e0064c8a ("powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support"). It is required for the patch "mmc: fsl_esdhc_spl: Add support for builds without CONFIG_SYS_MMC_U_BOOT_OFFS" which triggered this issue in SPL. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org>
* powerpc: mpc85xx: Fix check for CONFIG_SDCARDMarek Behún2022-09-161-1/+1
| | | | | | | | | | | | Commit d433c74eecdc ("Convert CONFIG_SDCARD et al to Kconfig") converted SYS_EXTRA_OPTIONS=SDCARD or SPIFLASH to config options CONFIG_SDCARD and CONFIG_SPIFLASH, but left one occurance unchanged. Fix this. Fixes: d433c74eecdc ("Convert CONFIG_SDCARD et al to Kconfig") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Pali Rohár <pali@kernel.org>
* board: freescale: p1_p2_rdb_pc: Turn off watchdog before resetPali Rohár2022-09-061-0/+4
| | | | | | | | | | | | | | P1/P2 RDB boards have external max6370 watchdog connected to CPLD and this watchdog is not deactivated on board reset. So if it is active during board reset, it can trigger another reset when CPU is booting U-Boot. To prevent possible infinite reset loop caused by external watchdog, turn it off before reset. Do it via a new board_reset_prepare() callback which is called from do_reset() function before any reset sequence. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* board: freescale: p1_p2_rdb_pc: Avoid usage of CPLD's system reset registerPali Rohár2022-09-061-0/+4
| | | | | | | | | | | | | CPLD's system reset register is buggy and requires workaround in U-Boot. So use this kind of board reset only when there is no other reset option. Introduce a new board_reset_last() callback which is last-stage board-specific reset and implement CPLD's system reset in this new board_reset_last() callback instead of board_reset() callback. Fixes: 20fb58fc5a1c ("board: freescale: p1_p2_rdb_pc: Implement board_reset()") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* ppc: Remove corenet_ds boardsTom Rini2022-08-201-1/+0
| | | | | | | | | These boards have been orphaned for some time and are behind on various DM migrations. Remove them. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_FSL_QMAN_V3 et al to KconfigTom Rini2022-08-123-7/+70
| | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_FSL_NGPIXIS CONFIG_SYS_FSL_QMAN_V3 CONFIG_SYS_FSL_RAID_ENGINE CONFIG_SYS_FSL_RMU CONFIG_SYS_FSL_SINGLE_SOURCE_CLK CONFIG_SYS_FSL_SRIO_LIODN CONFIG_SYS_FSL_TBCLK_DIV CONFIG_SYS_FSL_USB1_PHY_ENABLE CONFIG_SYS_FSL_USB2_PHY_ENABLE CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_FSL_PCIE_COMPAT to KconfigTom Rini2022-08-121-0/+37
| | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_FSL_PCIE_COMPAT To do this, introduce a choice and option for each of the strings used and set CONFIG_SYS_FSL_PCIE_COMPAT based on that. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_FSL_NUM_CC_PLLS to KconfigTom Rini2022-08-121-4/+0
| | | | | | | This converts the following to Kconfig: CONFIG_SYS_FSL_NUM_CC_PLLS Signed-off-by: Tom Rini <trini@konsulko.com>
* common: Drop display_options.h from common headerSimon Glass2022-08-103-0/+3
| | | | | | Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-28 01:10:06 +0000