ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12

Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12").
There is no functional change to the resulting DTs. The eeprom0 alias and
PHY reset GPIO are now reinstated in SoM u-boot dtsi.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

1 files changed, 5 insertions, 83 deletions

diff --git a/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts b/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts
index 59d13713d8..06770b4787 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts
+++ b/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts
@@ -2,92 +2,14 @@
 /*
  * Copyright (C) 2020 Marek Vasut <marex@denx.de>
  */
+/dts-v1/;
 
-#include "stm32mp15xx-dhcom.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcom-som.dtsi"
+#include "stm32mp15xx-dhcom-picoitx.dtsi"
 
 / {
 	model = "DH Electronics STM32MP15xx DHCOM PicoITX";
 	compatible = "dh,stm32mp15xx-dhcom-picoitx", "st,stm32mp1xx";
-
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&adc {
-	status = "disabled";
-};
-
-&dac {
-	status = "disabled";
-};
-
-&gpioa {
-	/*
-	 * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable
-	 * port power. This signal should be handled by USB power sequencing
-	 * in order to turn on port power when USB bus is powered up, but so
-	 * far there is no such functionality.
-	 */
-	usb-port-power {
-		gpio-hog;
-		gpios = <13 0>;
-		output-low;
-		line-name = "usb-port-power";
-	};
-};
-
-&i2c2 {	/* On board-to-board connector (optional) */
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&i2c5 {	/* On board-to-board connector */
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&usart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usart3_pins_a>;
-	status = "okay";
-};
-
-&uart8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart8_pins_a>;
-	status = "okay";
-};
-
-&usbh_ehci {
-	phys = <&usbphyc_port0>;
-	status = "okay";
-};
-
-&usbphyc {
-	status = "okay";
-};
-
-&usbphyc_port0 {
-	phy-supply = <&vdd_usb>;
-	vdda1v1-supply = <&reg11>;
-	vdda1v8-supply = <&reg18>;
 };