From 332facce6f5669fc1bb8d150c08cee2ebdae6d2b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 30 Dec 2021 23:46:47 +0100 Subject: ARM: dts: stm32: Synchronize DHCOM DTs with Linux 5.15.12 Synchronize DH DHCOM DTs with Linux commit 25960cafa06e ("Linux 5.15.12"). There is no functional change to the resulting DTs. The eeprom0 alias and PHY reset GPIO are now reinstated in SoM u-boot dtsi. Signed-off-by: Marek Vasut Cc: Patrice Chotard Cc: Patrick Delaunay Reviewed-by: Patrick Delaunay --- arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts | 88 ++---------------------------- 1 file changed, 5 insertions(+), 83 deletions(-) (limited to 'arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts') diff --git a/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts b/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts index 59d13713d8..06770b4787 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts +++ b/arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts @@ -2,92 +2,14 @@ /* * Copyright (C) 2020 Marek Vasut */ +/dts-v1/; -#include "stm32mp15xx-dhcom.dtsi" +#include "stm32mp157.dtsi" +#include "stm32mp15xc.dtsi" +#include "stm32mp15xx-dhcom-som.dtsi" +#include "stm32mp15xx-dhcom-picoitx.dtsi" / { model = "DH Electronics STM32MP15xx DHCOM PicoITX"; compatible = "dh,stm32mp15xx-dhcom-picoitx", "st,stm32mp1xx"; - - aliases { - serial0 = &uart4; - serial1 = &usart3; - serial2 = &uart8; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&adc { - status = "disabled"; -}; - -&dac { - status = "disabled"; -}; - -&gpioa { - /* - * NOTE: The USB Port on the PicoITX needs a PWR_EN signal to enable - * port power. This signal should be handled by USB power sequencing - * in order to turn on port power when USB bus is powered up, but so - * far there is no such functionality. - */ - usb-port-power { - gpio-hog; - gpios = <13 0>; - output-low; - line-name = "usb-port-power"; - }; -}; - -&i2c2 { /* On board-to-board connector (optional) */ - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; -}; - -&i2c5 { /* On board-to-board connector */ - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins_a>; - i2c-scl-rising-time-ns = <185>; - i2c-scl-falling-time-ns = <20>; - status = "okay"; - /* spare dmas for other usage */ - /delete-property/dmas; - /delete-property/dma-names; -}; - -&usart3 { - pinctrl-names = "default"; - pinctrl-0 = <&usart3_pins_a>; - status = "okay"; -}; - -&uart8 { - pinctrl-names = "default"; - pinctrl-0 = <&uart8_pins_a>; - status = "okay"; -}; - -&usbh_ehci { - phys = <&usbphyc_port0>; - status = "okay"; -}; - -&usbphyc { - status = "okay"; -}; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; - vdda1v1-supply = <®11>; - vdda1v8-supply = <®18>; }; -- cgit v1.2.3