diff options
| -rw-r--r-- | httpd-ssl.conf | 290 |
1 files changed, 0 insertions, 290 deletions
diff --git a/httpd-ssl.conf b/httpd-ssl.conf deleted file mode 100644 index 4015656..0000000 --- a/httpd-ssl.conf +++ /dev/null @@ -1,290 +0,0 @@ -# -# This is the Apache server configuration file providing SSL support. -# It contains the configuration directives to instruct the server how to -# serve pages over an https connection. For detailed information about these -# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html> -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# Required modules: mod_log_config, mod_setenvif, mod_ssl, -# socache_shmcb_module (for default value of SSLSessionCache) - -# -# Pseudo Random Number Generator (PRNG): -# Configure one or more sources to seed the PRNG of the SSL library. -# The seed data should be of good random quality. -# WARNING! On some platforms /dev/random blocks if not enough entropy -# is available. This means you then cannot use the /dev/random device -# because it would lead to very long connection times (as long as -# it requires to make more entropy available). But usually those -# platforms additionally provide a /dev/urandom device which doesn't -# block. So, if available, use this one instead. Read the mod_ssl User -# Manual for more details. -# -#SSLRandomSeed startup file:/dev/random 512 -#SSLRandomSeed startup file:/dev/urandom 512 -#SSLRandomSeed connect file:/dev/random 512 -#SSLRandomSeed connect file:/dev/urandom 512 - - -# -# When we also provide SSL we have to listen to the -# standard HTTP port (see above) and to the HTTPS port -# -Listen 443 - -## -## SSL Global Context -## -## All SSL configuration in this context applies both to -## the main server and all SSL-enabled virtual hosts. -## - -# SSL Cipher Suite: -# List the ciphers that the client is permitted to negotiate, -# and that httpd will negotiate as the client of a proxied server. -# See the OpenSSL documentation for a complete list of ciphers, and -# ensure these follow appropriate best practices for this deployment. -# httpd 2.2.30, 2.4.13 and later force-disable aNULL, eNULL and EXP ciphers, -# while OpenSSL disabled these by default in 0.9.8zf/1.0.0r/1.0.1m/1.0.2a. -SSLCipherSuite HIGH:MEDIUM:!MD5:!RC4:!3DES -SSLProxyCipherSuite HIGH:MEDIUM:!MD5:!RC4:!3DES - -# By the end of 2016, only TLSv1.2 ciphers should remain in use. -# Older ciphers should be disallowed as soon as possible, while the -# kRSA ciphers do not offer forward secrecy. These changes inhibit -# older clients (such as IE6 SP2 or IE8 on Windows XP, or other legacy -# non-browser tooling) from successfully connecting. -# -# To restrict mod_ssl to use only TLSv1.2 ciphers, and disable -# those protocols which do not support forward secrecy, replace -# the SSLCipherSuite and SSLProxyCipherSuite directives above with -# the following two directives, as soon as practical. -# SSLCipherSuite HIGH:MEDIUM:!SSLv3:!kRSA -# SSLProxyCipherSuite HIGH:MEDIUM:!SSLv3:!kRSA - -# User agents such as web browsers are not configured for the user's -# own preference of either security or performance, therefore this -# must be the prerogative of the web server administrator who manages -# cpu load versus confidentiality, so enforce the server's cipher order. -SSLHonorCipherOrder on - -# SSL Protocol support: -# List the protocol versions which clients are allowed to connect with. -# Disable SSLv3 by default (cf. RFC 7525 3.1.1). TLSv1 (1.0) should be -# disabled as quickly as practical. By the end of 2016, only the TLSv1.2 -# protocol or later should remain in use. -SSLProtocol all -SSLv3 -SSLProxyProtocol all -SSLv3 - -# Pass Phrase Dialog: -# Configure the pass phrase gathering process. -# The filtering dialog program (`builtin' is an internal -# terminal dialog) has to provide the pass phrase on stdout. -SSLPassPhraseDialog builtin - -# Inter-Process Session Cache: -# Configure the SSL Session Cache: First the mechanism -# to use and second the expiring timeout (in seconds). -#SSLSessionCache "dbm:/usr/local/apache2/logs/ssl_scache" -SSLSessionCache "shmcb:/usr/local/apache2/logs/ssl_scache(512000)" -SSLSessionCacheTimeout 300 - -# OCSP Stapling (requires OpenSSL 0.9.8h or later) -# -# This feature is disabled by default and requires at least -# the two directives SSLUseStapling and SSLStaplingCache. -# Refer to the documentation on OCSP Stapling in the SSL/TLS -# How-To for more information. -# -# Enable stapling for all SSL-enabled servers: -#SSLUseStapling On - -# Define a relatively small cache for OCSP Stapling using -# the same mechanism that is used for the SSL session cache -# above. If stapling is used with more than a few certificates, -# the size may need to be increased. (AH01929 will be logged.) -#SSLStaplingCache "shmcb:/usr/local/apache2/logs/ssl_stapling(32768)" - -# Seconds before valid OCSP responses are expired from the cache -#SSLStaplingStandardCacheTimeout 3600 - -# Seconds before invalid OCSP responses are expired from the cache -#SSLStaplingErrorCacheTimeout 600 - -## -## SSL Virtual Host Context -## - -<VirtualHost _default_:443> - -# General setup for the virtual host -DocumentRoot "/usr/local/apache2/htdocs" -ServerName himbeerserver.de:443 -ServerAdmin you@example.com -ErrorLog /proc/self/fd/2 -TransferLog /proc/self/fd/1 - -# SSL Engine Switch: -# Enable/Disable SSL for this virtual host. -SSLEngine on - -# Server Certificate: -# Point SSLCertificateFile at a PEM encoded certificate. If -# the certificate is encrypted, then you will be prompted for a -# pass phrase. Note that a kill -HUP will prompt again. Keep -# in mind that if you have both an RSA and a DSA certificate you -# can configure both in parallel (to also allow the use of DSA -# ciphers, etc.) -# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt) -# require an ECC certificate which can also be configured in -# parallel. -SSLCertificateFile "/usr/local/apache2/ssl/server.crt" -#SSLCertificateFile "/usr/local/apache2/ssl/server-dsa.crt" -#SSLCertificateFile "/usr/local/apache2/ssl/server-ecc.crt" - -# Server Private Key: -# If the key is not combined with the certificate, use this -# directive to point at the key file. Keep in mind that if -# you've both a RSA and a DSA private key you can configure -# both in parallel (to also allow the use of DSA ciphers, etc.) -# ECC keys, when in use, can also be configured in parallel -SSLCertificateKeyFile "/usr/local/apache2/ssl/server.key" -#SSLCertificateKeyFile "/usr/local/apache2/ssl/server-dsa.key" -#SSLCertificateKeyFile "/usr/local/apache2/ssl/server-ecc.key" - -# Server Certificate Chain: -# Point SSLCertificateChainFile at a file containing the -# concatenation of PEM encoded CA certificates which form the -# certificate chain for the server certificate. Alternatively -# the referenced file can be the same as SSLCertificateFile -# when the CA certificates are directly appended to the server -# certificate for convenience. -#SSLCertificateChainFile "/usr/local/apache2/ssl/server-ca.crt" - -# Certificate Authority (CA): -# Set the CA certificate verification path where to find CA -# certificates for client authentication or alternatively one -# huge file containing all of them (file must be PEM encoded) -# Note: Inside SSLCACertificatePath you need hash symlinks -# to point to the certificate files. Use the provided -# Makefile to update the hash symlinks after changes. -#SSLCACertificatePath "/usr/local/apache2/ssl/ssl.crt" -#SSLCACertificateFile "/usr/local/apache2/ssl/ssl.crt/ca-bundle.crt" - -# Certificate Revocation Lists (CRL): -# Set the CA revocation path where to find CA CRLs for client -# authentication or alternatively one huge file containing all -# of them (file must be PEM encoded). -# The CRL checking mode needs to be configured explicitly -# through SSLCARevocationCheck (defaults to "none" otherwise). -# Note: Inside SSLCARevocationPath you need hash symlinks -# to point to the certificate files. Use the provided -# Makefile to update the hash symlinks after changes. -#SSLCARevocationPath "/usr/local/apache2/ssl/ssl.crl" -#SSLCARevocationFile "/usr/local/apache2/ssl/ssl.crl/ca-bundle.crl" -#SSLCARevocationCheck chain - -# Client Authentication (Type): -# Client certificate verification type and depth. Types are -# none, optional, require and optional_no_ca. Depth is a -# number which specifies how deeply to verify the certificate -# issuer chain before deciding the certificate is not valid. -#SSLVerifyClient require -#SSLVerifyDepth 10 - -# TLS-SRP mutual authentication: -# Enable TLS-SRP and set the path to the OpenSSL SRP verifier -# file (containing login information for SRP user accounts). -# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for -# detailed instructions on creating this file. Example: -# "openssl srp -srpvfile /usr/local/apache2/ssl/passwd.srpv -add username" -#SSLSRPVerifierFile "/usr/local/apache2/ssl/passwd.srpv" - -# Access Control: -# With SSLRequire you can do per-directory access control based -# on arbitrary complex boolean expressions containing server -# variable checks and other lookup directives. The syntax is a -# mixture between C and Perl. See the mod_ssl documentation -# for more details. -#<Location /> -#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ -# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ -# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ -# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ -# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ -# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ -#</Location> - -# SSL Engine Options: -# Set various options for the SSL engine. -# o FakeBasicAuth: -# Translate the client X.509 into a Basic Authorisation. This means that -# the standard Auth/DBMAuth methods can be used for access control. The -# user name is the `one line' version of the client's X.509 certificate. -# Note that no password is obtained from the user. Every entry in the user -# file needs this password: `xxj31ZMTZzkVA'. -# o ExportCertData: -# This exports two additional environment variables: SSL_CLIENT_CERT and -# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the -# server (always existing) and the client (only existing when client -# authentication is used). This can be used to import the certificates -# into CGI scripts. -# o StdEnvVars: -# This exports the standard SSL/TLS related `SSL_*' environment variables. -# Per default this exportation is switched off for performance reasons, -# because the extraction step is an expensive operation and is usually -# useless for serving static content. So one usually enables the -# exportation for CGI and SSI requests only. -# o StrictRequire: -# This denies access when "SSLRequireSSL" or "SSLRequire" applied even -# under a "Satisfy any" situation, i.e. when it applies access is denied -# and no other module can change it. -# o OptRenegotiate: -# This enables optimized SSL connection renegotiation handling when SSL -# directives are used in per-directory context. -#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire -<FilesMatch "\.(cgi|shtml|phtml|php)$"> - SSLOptions +StdEnvVars -</FilesMatch> -<Directory "/usr/local/apache2/cgi-bin"> - SSLOptions +StdEnvVars -</Directory> - -# SSL Protocol Adjustments: -# The safe and default but still SSL/TLS standard compliant shutdown -# approach is that mod_ssl sends the close notify alert but doesn't wait for -# the close notify alert from client. When you need a different shutdown -# approach you can use one of the following variables: -# o ssl-unclean-shutdown: -# This forces an unclean shutdown when the connection is closed, i.e. no -# SSL close notify alert is sent or allowed to be received. This violates -# the SSL/TLS standard but is needed for some brain-dead browsers. Use -# this when you receive I/O errors because of the standard approach where -# mod_ssl sends the close notify alert. -# o ssl-accurate-shutdown: -# This forces an accurate shutdown when the connection is closed, i.e. a -# SSL close notify alert is send and mod_ssl waits for the close notify -# alert of the client. This is 100% SSL/TLS standard compliant, but in -# practice often causes hanging connections with brain-dead browsers. Use -# this only for browsers where you know that their SSL implementation -# works correctly. -# Notice: Most problems of broken clients are also related to the HTTP -# keep-alive facility, so you usually additionally want to disable -# keep-alive for those clients, too. Use variable "nokeepalive" for this. -# Similarly, one has to force some clients to use HTTP/1.0 to workaround -# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and -# "force-response-1.0" for this. -BrowserMatch "MSIE [2-5]" \ - nokeepalive ssl-unclean-shutdown \ - downgrade-1.0 force-response-1.0 - -# Per-Server Logging: -# The home of a custom SSL log file. Use this when you want a -# compact non-error SSL logfile on a virtual host basis. -CustomLog /proc/self/fd/1 \ - "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b" - -</VirtualHost> |