1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2018-2019, 2021 NXP
* Copyright 2023 Gilles Talis <gilles.talis@gmail.com>
*/
#include <asm/arch/clock.h>
#include <asm/arch/ddr.h>
#include <asm/arch/imx8mp_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/global_data.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/sections.h>
#include <common.h>
#include <dm/device.h>
#include <dm/uclass.h>
#include <hang.h>
#include <init.h>
#include <log.h>
#include <power/pca9450.h>
#include <power/pmic.h>
#include <spl.h>
DECLARE_GLOBAL_DATA_PTR;
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
return BOOT_DEVICE_BOOTROM;
}
void spl_dram_init(void)
{
ddr_init(&dram_timing);
}
void spl_board_init(void)
{
/*
* Set GIC clock to 500Mhz for OD VDD_SOC. Kernel driver does
* not allow to change it. Should set the clock after PMIC
* setting done. Default is 400Mhz (system_pll1_800m with div = 2)
* set by ROM for ND VDD_SOC
*/
clock_enable(CCGR_GIC, 0);
clock_set_target_val(GIC_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(5));
clock_enable(CCGR_GIC, 1);
puts("Normal Boot\n");
}
static int power_init_board(void)
{
struct udevice *dev;
int ret;
ret = pmic_get("pmic@25", &dev);
if (ret == -ENODEV) {
puts("Failed to get PMIC\n");
return 0;
}
if (ret != 0)
return ret;
/* BUCKxOUT_DVS0/1 control BUCK123 output. */
pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
/* Increase VDD_SOC to typical value 0.95V before first DRAM access. */
if (IS_ENABLED(CONFIG_IMX8M_VDD_SOC_850MV))
/* Set DVS0 to 0.85V for special case. */
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14);
else
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x1c);
/* Set DVS1 to 0.85v for suspend. */
pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x14);
/*
* Enable DVS control through PMIC_STBY_REQ and
* set B1_ENMODE=1 (ON by PMIC_ON_REQ=H).
*/
pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
/*
* Kernel uses OD/OD frequency for SoC.
* To avoid timing risk from SoC to ARM,
* increase VDD_ARM to OD voltage 0.95V
*/
pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1C);
return 0;
}
int board_fit_config_name_match(const char *name)
{
if (is_imx8mp() &&
!strcmp(name, "imx8mp-debix-model-a"))
return 0;
return -1;
}
void board_init_f(ulong dummy)
{
int ret;
arch_cpu_init();
init_uart_clk(1);
/* Clear the BSS. */
memset(__bss_start, 0, __bss_end - __bss_start);
ret = spl_init();
if (ret) {
debug("spl_init() failed: %d\n", ret);
hang();
}
preloader_console_init();
enable_tzc380();
power_init_board();
/* DDR initialization */
spl_dram_init();
board_init_r(NULL, 0);
}
|
