aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
Commit message (Collapse)AuthorAgeFilesLines
* common: Drop linux/printk.h from common headerSimon Glass2023-09-241-0/+1
| | | | | | | | | This old patch was marked as deferred. Bring it back to life, to continue towards the removal of common.h Move this out of the common header and include it only where needed. Signed-off-by: Simon Glass <sjg@chromium.org>
* stm32mp: stm32prog: use the decimal format by default for offset parsingPatrick Delaunay2023-06-161-1/+1
| | | | | | | | | | | | | | | | | | Change the default base for offset parsing with simple_strtoull(), so offset in flashlayout is coded in base 10 by default, even if string start with '0'. The Octal encoding is not supported. The base 16 is still supported when the '0x' header is detected. This patch solves an unexpected parsing result when the address, provided by decimal value is starting by 0, for example 0x4400 = 00017408 is a invalid with current code. ... P 0x04 fsbl1 Binary mmc0 00017408 tf-a.stm32 .... Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: fix OTP read/write error managementPatrick Delaunay2023-06-161-1/+8
| | | | | | | | | | | | | Avoid to ignore the OTP read/write error and transmits the error to STM32CubeProgrammer. Today the error is only displayed in log error: so the user on HOST thinks the OTP operation is performed. Reported-by: Mickael GARDET <m.gardet@overkiz.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Fixes: 75ea9e75931c ("stm32mp: stm32prog: add TEE support in stm32prog command") Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: Add support of FWU_MDATA partition typePatrick Delaunay2023-06-161-0/+11
| | | | | | | | | | | | | | | | | | | Add support of "FWU_MDATA" partition type in flashlayout to select the TF-A firmware update metadata partition type guid, associated to U-Boot "system" partition type guid, FWU_MDATA_GUID introduced by commit 2eaedc95164f ("FWU: Add FWU metadata structure and driver for accessing metadata") and used in gpt_get_mdata_partitions() for commit 554b38f7a532 ("FWU: Add FWU metadata access driver for GPT partitioned block devices") See also recommendation in FWU-PSA-A_DEN0118_1.0ALP3.pdf 4.1.2 Metadata integration with GPT When embedded in a GPT, each metadata replica occupies a single partition with PartitionTypeGUID = metadata_uuid. UUID = 8a7a84a0-8387-40f6-ab41-a8b9a5a60d23 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: Add support of ESP partition typePatrick Delaunay2023-06-161-1/+7
| | | | | | | | | | | | Add support of "ESP" partition type in flashlayout to select the "EFI System Partition", associated to U-Boot "system" partition type guid, PARTITION_SYSTEM_GUID = C12A7328-F81F-11d2-BA4B-00A0C93EC93B. This partition is the bootable partition for efi boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: Add support of ENV partition typePatrick Delaunay2023-06-161-0/+5
| | | | | | | | | | | | Add support of "ENV" partition type in flashlayout to select the "u-boot-env" GUID, with PARTITION_U_BOOT_ENVIRONMENT = 3de21764-95bd-54bd-a5c3-4abe786f38a8, that mean a partition holding a U-Boot environment introduced by commit c0364ce1c695 ("doc/README.gpt: define partition type GUID for U-Boot environment")' Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: Remove tee_detected from stm32prog_data structPatrice Chotard2023-06-161-11/+0
| | | | | | | | | As stm32prog_get_tee_partitions() is no more used, remove tee_detected boolean from stm32prog_data struct and all code using it. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: Remove usage of "mtdparts" functionPatrice Chotard2023-06-161-23/+19
| | | | | | | | | | | | | | | Motivation for this patch is to remove usage of function define in cmd/mtdparts.c interface, based on env variables mtdids and mtdparts: mtdparts_init() and find_dev_and_part(). See commit 938db6fe5da3 ("cmd: mtdparts: describe as legacy") Now, all MTD devices are populated with their partition's information found in DT, accessible in MTD devices. Use these information to find the wanted partitions, no more need of find_dev_and_part() usage. Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* Correct SPL uses of PMIC_STPMIC1Simon Glass2023-02-101-2/+2
| | | | | | | This converts 2 usages of this option to the non-SPL form, since there is no SPL_PMIC_STPMIC1 defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
* Correct SPL uses of MTDSimon Glass2023-02-101-1/+1
| | | | | | | This converts 2 usages of this option to the non-SPL form, since there is no SPL_MTD defined in Kconfig Signed-off-by: Simon Glass <sjg@chromium.org>
* stm32mp: stm32prog: improve the partitioning tracePatrick Delaunay2022-09-231-2/+2
| | | | | | | | | Improve the partitioning trace done in command stm32prog: - remove the trace "partition: Done" when the GPT partitioning is not done - indicate the mmc instance used for each 'gpt write' command Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: correctly handle OTP when SMC is not supportedPatrick Delaunay2022-09-231-8/+17
| | | | | | | | | As the SMC is only supported in SP-MIN for STM32MP15x, the associated partition should be absent when the TA NVMEM is not available in OPT-TEE in STM32MP13x. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: solve warning for 64bits compilationPatrick Delaunay2022-09-231-8/+8
| | | | | | | Solve many compilation warning when stm32prog is activated on the aarch64. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: change default flashlayout location to CONFIG_SYS_LOAD_ADDRPatrick Delaunay2022-09-231-4/+4
| | | | | | | | | | | | | Change the defaut flashlayout location, hardcoded at STM32_DDR_BASE, to CONFIG_SYS_LOAD_ADDR to avoid issue on board with reserved memory at STM32_DDR_BASE. This patch changes the command behavior for STM32MP13 and STM32MP15 platform, as CONFIG_SYS_LOAD_ADDR(0xc2000000) != STM32_DDR_BASE but without impact for serial boot with STM32CubeProgrammer. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: support empty flashlayoutPatrick Delaunay2022-09-231-0/+4
| | | | | | | | | | When the STM32CubeProgrammer sent a empty flashlayout.tsv file, the command stm32prog correctly parse the file but data->dev_nb = 0 and the stm32prog_devices_init operations should be skipped. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* blk: Switch over to using uclass IDsSimon Glass2022-09-161-2/+2
| | | | | | | | | | | | We currently have an if_type (interface type) and a uclass id. These are closely related and we don't need to have both. Drop the if_type values and use the uclass ones instead. Maintain the existing, subtle, one-way conversion between UCLASS_USB and UCLASS_MASS_STORAGE for now, and add a comment. Signed-off-by: Simon Glass <sjg@chromium.org>
* stm32mp: stm32prog: fix the last character of dfu_alt_add third parameterPatrick Delaunay2022-06-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | The third parameter of dfu_alt_add(), the string description of alternate, is build in stm32prog_alt_add() with a unnecessary character ';' at the end of the string. This separator was required in the first implementation of dfu_alt_add() but is no more needed in the current implementation; this separator is managed only in dfu_config_interfaces() which call dfu_alt_add() for this parameter without this separator. And since the commit 53b406369e9d ("DFU: Check the number of arguments and argument string strictly"), this added character cause an error when the stm32prog command is executed because the third parameter of dfu_alt_add() must be a string with a numerical value; 's' must be NULL in the result of call in dfu_fill_entity_mmc(): third_arg = simple_strtoul(argv[2], &s, 0); Fixes: 53b406369e9d ("DFU: Check the number of arguments and argument string strictly") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: handle flashlayout without STM32 image headerPatrick Delaunay2022-05-101-1/+2
| | | | | | | | | | | | Accept flashlayout without header in alternate 0, to simplify the support of stm32prog command with dfu-util. By default the flashlayout file size is the size of the received binary, provided with the offset in the DFU alternate. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: handle U-Boot script in flashlayout alternatePatrick Delaunay2022-05-101-0/+9
| | | | | | | | | | | | | | | | Update the stm32prog command to allow the reception of U-Boot script in the FlashLayout alternate during the first USB enumeration. This patch is aligned with the last TF-A behavior: the Flashlayout is now loaded by U-Boot; it is no more present at STM32_DDR_BASE when the stm32prog is launched after a serial boot, on UART or on USB. The received script must be a U-Boot legacy image, no more need to add a stm32image header. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: add support of UUID for FIP partitionPatrick Delaunay2022-05-101-19/+57
| | | | | | | | | | | | | | | | | | Add support of UUID for FIP parttion, required by Firmware update support in TF-A: - UUID TYPE for FIP partition: 19d5df83-11b0-457b-be2c-7559c13142a5 - "fip-a" partition UUID: 4fd84c93-54ef-463f-a7ef-ae25ff887087 - "fip-b" partition UUID: 09c54952-d5bf-45af-acee-335303766fb3 This check is done with a new partition type "FIP" associated at the FIP UUID. The A/B partition UUID is detected by the partition name: "fip-a", "fip-b". Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: add support of STM32IMAGE version 2Patrick Delaunay2022-05-101-36/+83
| | | | | | | | | Add support of new header for the STM32IMAGE version V2 in command stm32prog command for STM32MP13x family. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: add TEE support in stm32prog commandPatrick Delaunay2022-05-101-11/+134
| | | | | | | | | | | | When OP-TEE is used, the SMC for BSEC management are not available and the PTA provisioning for OTP must be used. U-Boot opens the session to this PTA and use it for OTP access. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: add CONFIG_CMD_STM32PROG_OTPPatrick Delaunay2022-05-101-27/+39
| | | | | | | | | | | | | Add a configuration flag CONFIG_CMD_STM32PROG_OTP to enable the support of OTP update in stm32prog command. This new configuration allows to deactivate this feature for security reason and it is a preliminary step for support of OPT update with the OP-TEE provisioning TA. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: fix commentPatrick Delaunay2022-05-101-1/+1
| | | | | | | | Fix "partition" in comment. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32prog: add partition name in treat_partition_list error messagesPatrick Delaunay2022-01-241-6/+6
| | | | | | | | | | | | | | Add the partition name and remove the line number in error messages of treat_partition_list() to provide correct information to user of STM32CubeProgrammer. The "line number" value was confusing because it is incorrect here; the index in part_array[] is not aligned with the line number in the parsed Layout file, because the empty lines and the lines beginning by '#' are skipped during the first parsing in parse_flash_layout(). Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp1: stm32prog: remove stm32prog_get_tee_partitions with FIPPatrick Delaunay2021-08-161-0/+4
| | | | | | | | | | | | | The MTD tee partitions used to save the OP-TEE binary are needed when TF-A doesn't use the FIP container to load binaries. This patch puts under CONFIG_STM32MP15x_STM32IMAGE flag the associated code in U-Boot binary and prepare the code cleanup when CONFIG_STM32MP15x_STM32IMAGE support will be removed after TF-A migration to FIP support. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* global: Convert simple_strtoul() with decimal to dectoul()Simon Glass2021-08-021-1/+1
| | | | | | | It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
* stm32mp: stm32prog: use defines for virtual partition sizePatrick Delaunay2021-07-161-3/+3
| | | | | | | | | | | Use the existing defines PMIC_SIZE and OTP_SIZE and a new define CMD_SIZE for virtual partition size. This patch corrects the size for OTP partition in alternate name (1024 instead of 512) and avoids other alignment issues. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: handle dfu errorPatrick Delaunay2021-06-181-0/+14
| | | | | | | Handle DFU stack error in STM32CubeProgrammer protocol. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: correctly handle DM_PMICPatrick Delaunay2021-06-181-1/+4
| | | | | | | | | Correctly handle number of alternate when DM_PMIC is not activated. This patch remove the last UNKNOWN partition in this case. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
* stm32mp: stm32prog: add support of initrd in flashlayoutPatrick Delaunay2021-06-181-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the support in command stm32prog of kernel load and start with initrd file, identify by the partition Type "Binary" in the flashlayout.tsv, for example: - 0x01 fsbl Binary none 0x0 tfa.stm32 - 0x03 fip Binary none 0x0 fip.bin P 0x10 kernel System ram0 0xC2000000 uImage.bin P 0x11 dtb FileSystem ram0 0xC4000000 board.dtb P 0x12 initrd Binary ram0 0xC4400000 <initrd> The <initrd> file can be a legacy image "uInitrd", generated with mkimage, or a RAW initrd image "initrd.gz". After a DFU detach the bootm command with be executed with the associated address, for example: $> bootm 0xC2000000 0xC4400000:<size> 0xC4000000 When the "Binary" partition type is absent, the 'bootm' command starts the kernel without ramdisk, for example: $> bootm 0xC2000000 - 0xC4000000 With this paths, it is no more mandatory to generate FIT including the kernel, DT and initrd: - 0x01 fsbl Binary none 0x0 tfa.stm32 - 0x03 fip Binary none 0x0 fip.bin P 0x10 fit System ram0 0xC2000000 fit.bin Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: remove all the header check for UART downloadPatrick Delaunay2021-06-181-7/+7
| | | | | | | | | | | | | This patch removes the header check for UART download; the check of checksum is not mandatory with even parity and chuck checksum for each 256 received bytes and it is only done for STM32 image (FSBL = TF-A BL2), not for FIT image. This patch solve issue of duplicated 0x100 byte written with FIP header. Fixes: 4fb7b3e10891 ("stm32mp: stm32prog: add FIP header support") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* stm32mp: stm32prog: add FIP header supportPatrick Delaunay2021-04-091-19/+40
| | | | | | | | | | | | | | Add support of TF-A FIP header in command stm32prog for all the boot partition and not only the STM32IMAGE. This patch is a preliminary patch to support FIP as second boot stage after TF-A BL2 when CONFIG_TFABOOT is activated for trusted boot chain. The FIP is archive binary loaded by TF-A BL2, which contains the secure OS = OP-TEE and the non secure firmware and device tree = U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* common: Drop asm/global_data.h from common headerSimon Glass2021-02-021-0/+1
| | | | | | | | | | | | Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: stm32mp: migrate cmd_stm32prog to log macroPatrick Delaunay2021-01-131-56/+56
| | | | | | | Change debug and pr_ macro to log macro. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()Simon Glass2021-01-051-3/+3
| | | | | | | | In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass <sjg@chromium.org>
* stm32mp: stm32prog: accept device without partitionPatrick Delaunay2020-10-211-2/+1
| | | | | | | | | | | | | | | | | | | | | When partitions are not available on a device the command stm32prog raises an error but a device can have no partition to check in init_device() and the command need to continue to the next part_id. This patch correct an issue for ram0 target, when block_dev and mtd are NULL. For example with the simple flashlayout file: Opt Part Name Type Device Offset Binary - 0x01 fsbl Binary none 0x0 tf-a-serialboot.stm32 - 0x03 ssbl Binary none 0x0 u-boot.stm32 P 0x10 kernel System ram0 0xC2000000 uImage.bin P 0x11 dtb FileSytem ram0 0xC4000000 stm32mp157f-ev1.dtb Fixes: ffc405e63b94 ("stm32mp: stm32prog: add upport of partial update") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdefPatrick Delaunay2020-08-131-44/+56
| | | | | | | Use IS_ENABLED to prevent ifdef in stm32prog command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* arm: stm32mp: stm32prog: check result of find_mmc_devicePatrick Delaunay2020-07-281-1/+1
| | | | | | | | | | | Check result of find_mmc_device() before calling mmc_init(). This patch avoid a data abort when the command try to acces to sd/mmc device deactivated in device tree. Fixes: aff4c5dd8265 ("stm32mp: stm32prog: add MMC device") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* command: Remove the cmd_tbl_t typedefSimon Glass2020-05-181-1/+1
| | | | | | | | | | | | | We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
* part: Drop disk_partition_t typedefSimon Glass2020-05-181-1/+1
| | | | | | | We should not be using typedefs and these make it harder to use forward declarations (to reduce header file inclusions). Drop the typedef. Signed-off-by: Simon Glass <sjg@chromium.org>
* stm32mp: stm32prog: add support of RAM targetPatrick Delaunay2020-05-141-1/+28
| | | | | | | | | | | | | | | | Add support of RAM target in flashlayout to load kernel image ("system") and device tree ("filesystem") in DDR with DFU and start these images. The flashlayout.tsv is: - 0x01 fsbl Binary none 0x00000000 tf-a.stm32 - 0x03 ssbl Binary none 0x00000000 u-boot.stm32 P 0x10 kernel System ram0 0xC2000000 uImage.bin P 0x11 dtb FileSystem ram0 0xC4000000 dtb.bin Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add serial link supportPatrick Delaunay2020-05-141-0/+4
| | | | | | | | | | Add a support of UART, using the same protocol than MCU STM32. See "AN5275: USB DFU/USART protocols used in STM32MP1 Series bootloaders" for details. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add pmic NVM update supportPatrick Delaunay2020-05-141-1/+94
| | | | | | | | Add a virtual partition to update the pmic non volatile memory. (on ST board, STPMIC1). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add otp update supportPatrick Delaunay2020-05-141-1/+129
| | | | | | | | Add a virtual partition to update the STM32MP15x OTP based on SMC service provided by TF-A. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add support for delete option in flashlayoutPatrick Delaunay2020-05-141-0/+105
| | | | | | | | Add support for delete option 'D' in flashlayout for full device or for partitions Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add support of ssbl copyPatrick Delaunay2020-05-141-5/+93
| | | | | | | | | | For reliability of boot from NAND/SPI-NAND (with read-disturb issue) the SSBL can be present several time, when it is indicated in the flashlayout with "Binary(X)". The received binary is copied X times by U-Boot on the target. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: adapt the MTD partitionsPatrick Delaunay2020-05-141-0/+17
| | | | | | | | | | Dynamically adapt the MTD partitions in NOR/NAND/SPI-NAND when stm32prog command detects in the parsed flash layout files: - a fsbl partition in NOR. - a tee partition in NOR/NAND/SPI-NAND Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add MTD devices supportPatrick Delaunay2020-05-141-3/+111
| | | | | | | | Add support of MTD device (DFU_MTD backend) for NOR, NAND or SPI-NAND target. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add upport of partial updatePatrick Delaunay2020-05-141-0/+69
| | | | | | | | | Add support of partial update, update only some partitions, and check the coherence of the layout with the existing GPT partitions (offset and size). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-15 07:10:04 +0000