aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c
Commit message (Collapse)AuthorAgeFilesLines
* stm32mp: stm32prog: add FIP header supportPatrick Delaunay2021-04-091-19/+40
| | | | | | | | | | | | | | Add support of TF-A FIP header in command stm32prog for all the boot partition and not only the STM32IMAGE. This patch is a preliminary patch to support FIP as second boot stage after TF-A BL2 when CONFIG_TFABOOT is activated for trusted boot chain. The FIP is archive binary loaded by TF-A BL2, which contains the secure OS = OP-TEE and the non secure firmware and device tree = U-Boot. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
* common: Drop asm/global_data.h from common headerSimon Glass2021-02-021-0/+1
| | | | | | | | | | | | Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: stm32mp: migrate cmd_stm32prog to log macroPatrick Delaunay2021-01-131-56/+56
| | | | | | | Change debug and pr_ macro to log macro. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* dm: Rename DM_GET_DRIVER() to DM_DRIVER_GET()Simon Glass2021-01-051-3/+3
| | | | | | | | In the spirit of using the same base name for all of these related macros, rename this to have the operation at the end. This is not widely used so the impact is fairly small. Signed-off-by: Simon Glass <sjg@chromium.org>
* stm32mp: stm32prog: accept device without partitionPatrick Delaunay2020-10-211-2/+1
| | | | | | | | | | | | | | | | | | | | | When partitions are not available on a device the command stm32prog raises an error but a device can have no partition to check in init_device() and the command need to continue to the next part_id. This patch correct an issue for ram0 target, when block_dev and mtd are NULL. For example with the simple flashlayout file: Opt Part Name Type Device Offset Binary - 0x01 fsbl Binary none 0x0 tf-a-serialboot.stm32 - 0x03 ssbl Binary none 0x0 u-boot.stm32 P 0x10 kernel System ram0 0xC2000000 uImage.bin P 0x11 dtb FileSytem ram0 0xC4000000 stm32mp157f-ev1.dtb Fixes: ffc405e63b94 ("stm32mp: stm32prog: add upport of partial update") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* arm: stm32mp: stm32prog: use IS_ENABLED to prevent ifdefPatrick Delaunay2020-08-131-44/+56
| | | | | | | Use IS_ENABLED to prevent ifdef in stm32prog command. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* arm: stm32mp: stm32prog: check result of find_mmc_devicePatrick Delaunay2020-07-281-1/+1
| | | | | | | | | | | Check result of find_mmc_device() before calling mmc_init(). This patch avoid a data abort when the command try to acces to sd/mmc device deactivated in device tree. Fixes: aff4c5dd8265 ("stm32mp: stm32prog: add MMC device") Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* command: Remove the cmd_tbl_t typedefSimon Glass2020-05-181-1/+1
| | | | | | | | | | | | | We should not use typedefs in U-Boot. They cannot be used as forward declarations which means that header files must include the full header to access them. Drop the typedef and rename the struct to remove the _s suffix which is now not useful. This requires quite a few header-file additions. Signed-off-by: Simon Glass <sjg@chromium.org>
* part: Drop disk_partition_t typedefSimon Glass2020-05-181-1/+1
| | | | | | | We should not be using typedefs and these make it harder to use forward declarations (to reduce header file inclusions). Drop the typedef. Signed-off-by: Simon Glass <sjg@chromium.org>
* stm32mp: stm32prog: add support of RAM targetPatrick Delaunay2020-05-141-1/+28
| | | | | | | | | | | | | | | | Add support of RAM target in flashlayout to load kernel image ("system") and device tree ("filesystem") in DDR with DFU and start these images. The flashlayout.tsv is: - 0x01 fsbl Binary none 0x00000000 tf-a.stm32 - 0x03 ssbl Binary none 0x00000000 u-boot.stm32 P 0x10 kernel System ram0 0xC2000000 uImage.bin P 0x11 dtb FileSystem ram0 0xC4000000 dtb.bin Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add serial link supportPatrick Delaunay2020-05-141-0/+4
| | | | | | | | | | Add a support of UART, using the same protocol than MCU STM32. See "AN5275: USB DFU/USART protocols used in STM32MP1 Series bootloaders" for details. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add pmic NVM update supportPatrick Delaunay2020-05-141-1/+94
| | | | | | | | Add a virtual partition to update the pmic non volatile memory. (on ST board, STPMIC1). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add otp update supportPatrick Delaunay2020-05-141-1/+129
| | | | | | | | Add a virtual partition to update the STM32MP15x OTP based on SMC service provided by TF-A. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add support for delete option in flashlayoutPatrick Delaunay2020-05-141-0/+105
| | | | | | | | Add support for delete option 'D' in flashlayout for full device or for partitions Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add support of ssbl copyPatrick Delaunay2020-05-141-5/+93
| | | | | | | | | | For reliability of boot from NAND/SPI-NAND (with read-disturb issue) the SSBL can be present several time, when it is indicated in the flashlayout with "Binary(X)". The received binary is copied X times by U-Boot on the target. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: adapt the MTD partitionsPatrick Delaunay2020-05-141-0/+17
| | | | | | | | | | Dynamically adapt the MTD partitions in NOR/NAND/SPI-NAND when stm32prog command detects in the parsed flash layout files: - a fsbl partition in NOR. - a tee partition in NOR/NAND/SPI-NAND Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add MTD devices supportPatrick Delaunay2020-05-141-3/+111
| | | | | | | | Add support of MTD device (DFU_MTD backend) for NOR, NAND or SPI-NAND target. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add upport of partial updatePatrick Delaunay2020-05-141-0/+69
| | | | | | | | | Add support of partial update, update only some partitions, and check the coherence of the layout with the existing GPT partitions (offset and size). Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add support of boot partition for eMMC devicePatrick Delaunay2020-05-141-35/+89
| | | | | | | | | | | | | Add support of eMMC device boot partition with part_id = -1 for offset="boot1" or = -2 for offset="boot2" The stm32prog command configures the MMC DFU backend with "mmcpart" and configure the eMMC (command "mmc bootbus" and "mmc partconf") when the update is done. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add MMC devicePatrick Delaunay2020-05-141-1/+203
| | | | | | | | | | | Add support of MMC device (based on DFU_MMC backend) for SD card and eMMC update. Create a GPT partitioning on the device. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: stm32prog: add flash layout parsingPatrick Delaunay2020-05-141-1/+371
| | | | | | | | | Build the list of device and of partition with a tab separated value file with a stm32 header: the FlashLayout.tsv (https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* stm32mp: add the command stm32progPatrick Delaunay2020-05-141-0/+480
Add a specific command stm32prog for STM32MP soc family witch allows to program the boot devices with the tool STM32CubeProgrammer (http://www.st.com/STM32CubeProg). This command uses the same UART STM32 protocol than MCU STM32 with or USB with DFU protocol v1.1 (ithe MCU ST extension are no supported). The executed actions are based on a tab separated value file with a stm32 header, the FlashLayout file (https://wiki.st.com/stm32mpu/wiki/STM32CubeProgrammer_flashlayout). This file is parsed by the U-Boot command to: - initialize the devices - create the partition table on each device - initialize the DFU backend to access to not volatile memory (NOR/NAND/SD/eMMC) or to virtual device (OTP/PMIC) Up to STM32PROG_MAX_DEV (5) devices can be updated with a FlashLayout. The communication between U-Boot and STM32CubeProgrammer is done with the specific alternate configuration (see "AN5275: USB DFU/USART protocols used in STM32MP1 Series bootloaders" for details). The command stm32prog is executed when a boot from USB is detected (selected with bootpins) and we can program the boot devices with a simple command (on Windows or Linux): PC $> STM32_Programmer_CLI -c port=usb1 -w flaslayout.tsv 1/ the ROM code loads TF-A in embedded RAM (DFU or uart) 2/ TF-A loads flashlayout file and U-Boot in DDR (DFU or uart) 3/ U-Boot executes the stm32prog command (DFU or uart) Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-18 19:08:13 +0000