aboutsummaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/configs/km/km-mpc8309.h119
-rw-r--r--include/configs/kmtegr1.h58
-rw-r--r--include/configs/warp.h112
-rw-r--r--include/linux/immap_qe.h2
-rw-r--r--include/mpc83xx.h151
5 files changed, 1 insertions, 441 deletions
diff --git a/include/configs/km/km-mpc8309.h b/include/configs/km/km-mpc8309.h
deleted file mode 100644
index 0468ed5e83..0000000000
--- a/include/configs/km/km-mpc8309.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * High Level Configuration Options
- */
-
-#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0"
-
-/* QE microcode/firmware address */
-/* between the u-boot partition and env */
-
-/*
- * System IO Config
- */
-/* 0x14000180 SICR_1 */
-#ifndef CONFIG_SYS_SICRL
-#define CONFIG_SYS_SICRL (0 \
- | SICR_1_UART1_UART1RTS \
- | SICR_1_I2C_CKSTOP \
- | SICR_1_IRQ_A_IRQ \
- | SICR_1_IRQ_B_IRQ \
- | SICR_1_GPIO_A_GPIO \
- | SICR_1_GPIO_B_GPIO \
- | SICR_1_GPIO_C_GPIO \
- | SICR_1_GPIO_D_GPIO \
- | SICR_1_GPIO_E_GPIO \
- | SICR_1_GPIO_F_GPIO \
- | SICR_1_USB_A_UART2S \
- | SICR_1_USB_B_UART2RTS \
- | SICR_1_FEC1_FEC1 \
- | SICR_1_FEC2_FEC2 \
- )
-#endif
-
-/* 0x00080400 SICR_2 */
-#define CONFIG_SYS_SICRH (0 \
- | SICR_2_FEC3_FEC3 \
- | SICR_2_HDLC1_A_HDLC1 \
- | SICR_2_ELBC_A_LA \
- | SICR_2_ELBC_B_LCLK \
- | SICR_2_HDLC2_A_HDLC2 \
- | SICR_2_USB_D_GPIO \
- | SICR_2_PCI_PCI \
- | SICR_2_HDLC1_B_HDLC1 \
- | SICR_2_HDLC1_C_HDLC1 \
- | SICR_2_HDLC2_B_GPIO \
- | SICR_2_HDLC2_C_HDLC2 \
- | SICR_2_QUIESCE_B \
- )
-
-/* GPR_1 */
-#define CONFIG_SYS_GPR1 0x50008060
-
-#define CONFIG_SYS_DDRCDR (\
- DDRCDR_EN | \
- DDRCDR_PZ_MAXZ | \
- DDRCDR_NZ_MAXZ | \
- DDRCDR_M_ODR)
-
-#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f
-#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
- SDRAM_CFG_32_BE | \
- SDRAM_CFG_SREN | \
- SDRAM_CFG_HSE)
-
-#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000
-#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
-#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
- (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
-
-#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \
- CSCONFIG_ODT_RD_NEVER | \
- CSCONFIG_ODT_WR_ONLY_CURRENT | \
- CSCONFIG_ROW_BIT_13 | \
- CSCONFIG_COL_BIT_10)
-
-#define CONFIG_SYS_DDR_MODE 0x47860242
-#define CONFIG_SYS_DDR_MODE2 0x8080c000
-
-#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
- (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
- (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
- (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
- (0 << TIMING_CFG0_WWT_SHIFT) | \
- (0 << TIMING_CFG0_RRT_SHIFT) | \
- (0 << TIMING_CFG0_WRT_SHIFT) | \
- (0 << TIMING_CFG0_RWT_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \
- (2 << TIMING_CFG1_WRTORD_SHIFT) | \
- (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
- (3 << TIMING_CFG1_WRREC_SHIFT) | \
- (7 << TIMING_CFG1_REFREC_SHIFT) | \
- (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
- (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
- (3 << TIMING_CFG1_PRETOACT_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
- (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
- (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
- (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
- (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
- (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
- (5 << TIMING_CFG2_CPO_SHIFT))
-
-#define CONFIG_SYS_DDR_TIMING_3 0x00000000
-
-#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000
-#define CONFIG_SYS_KMBEC_FPGA_SIZE 128
-
-/* EEprom support */
-
-/* ethernet port connected to piggy (UEC2) */
-#define CONFIG_UEC_ETH2
-#define CONFIG_SYS_UEC2_UCC_NUM 2 /* UCC3 */
-#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE /* not used in RMII Mode */
-#define CONFIG_SYS_UEC2_TX_CLK QE_CLK12
-#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
-#define CONFIG_SYS_UEC2_PHY_ADDR 0
-#define CONFIG_SYS_UEC2_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
-#define CONFIG_SYS_UEC2_INTERFACE_SPEED 100
diff --git a/include/configs/kmtegr1.h b/include/configs/kmtegr1.h
deleted file mode 100644
index bdd35cc7fb..0000000000
--- a/include/configs/kmtegr1.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- * Dave Liu <daveliu@freescale.com>
- *
- * Copyright (C) 2007 Logic Product Development, Inc.
- * Peter Barada <peterb@logicpd.com>
- *
- * Copyright (C) 2007 MontaVista Software, Inc.
- * Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * (C) Copyright 2010
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-
-#define CONFIG_HOSTNAME "kmtegr1"
-#define CONFIG_KM_UBI_PARTITION_NAME_BOOT "ubi0"
-#define CONFIG_KM_UBI_PARTITION_NAME_APP "ubi1"
-
-#define CONFIG_NAND_ECC_BCH
-#define CONFIG_NAND_KMETER1
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define NAND_MAX_CHIPS 1
-
-#define CONFIG_SYS_SICRL (0 \
- | SICR_1_UART1_UART1RTS \
- | SICR_1_I2C_CKSTOP \
- | SICR_1_IRQ_A_IRQ \
- | SICR_1_IRQ_B_IRQ \
- | SICR_1_GPIO_A_GPIO \
- | SICR_1_GPIO_B_GPIO \
- | SICR_1_GPIO_C_GPIO \
- | SICR_1_GPIO_D_GPIO \
- | SICR_1_GPIO_E_LCS \
- | SICR_1_GPIO_F_GPIO \
- | SICR_1_USB_A_UART2S \
- | SICR_1_USB_B_UART2RTS \
- | SICR_1_FEC1_FEC1 \
- | SICR_1_FEC2_FEC2 \
- )
-
-/* include common defines/options for all Keymile boards */
-#include "km/keymile-common.h"
-#include "km/km-powerpc.h"
-#include "km/km-mpc83xx.h"
-#include "km/km-mpc8309.h"
-
-/* must be after the include because KMBEC_FPGA is otherwise undefined */
-#define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/warp.h b/include/configs/warp.h
deleted file mode 100644
index d2c4391935..0000000000
--- a/include/configs/warp.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2014 O.S. Systems Software LTDA.
- * Copyright (C) 2014 Kynetics LLC.
- * Copyright (C) 2014 Revolution Robotics, Inc.
- *
- * Author: Otavio Salvador <otavio@ossystems.com.br>
- *
- * Configuration settings for the WaRP Board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "mx6_common.h"
-
-#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
-
-/* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
-
-/* Watchdog */
-
-/* Physical Memory Map */
-#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
-
-/* VDD voltage 1.65 - 1.95 */
-#define CONFIG_SYS_SD_VOLTAGE 0x00000080
-
-/* USB Configs */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#endif
-
-#define CONFIG_USBD_HS
-
-#define DFU_DEFAULT_POLL_TIMEOUT 300
-
-/* I2C Configs */
-
-/* PMIC */
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=zImage\0" \
- "console=ttymxc0\0" \
- "fdt_high=0xffffffff\0" \
- "initrd_high=0xffffffff\0" \
- "fdt_file=imx6sl-warp.dtb\0" \
- "fdt_addr=0x88000000\0" \
- "initrd_addr=0x83800000\0" \
- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
- "mmcdev=0\0" \
- "mmcpart=1\0" \
- "finduuid=part uuid mmc 0:2 uuid\0" \
- "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=PARTUUID=${uuid} rootwait rw\0" \
- "loadbootscript=" \
- "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
- "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run finduuid; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0"
-
-#endif /* __CONFIG_H */
diff --git a/include/linux/immap_qe.h b/include/linux/immap_qe.h
index 022771fff5..45307f51c1 100644
--- a/include/linux/immap_qe.h
+++ b/include/linux/immap_qe.h
@@ -16,7 +16,7 @@
#define QE_MURAM_SIZE 0xc000UL
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
-#elif defined(CONFIG_ARCH_MPC832X) || defined(CONFIG_ARCH_MPC8309)
+#elif defined(CONFIG_ARCH_MPC832X)
#define QE_MURAM_SIZE 0x4000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 2181a90b59..5926c8090a 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -340,85 +340,6 @@
#define SICRH_TSOBI2_V3P3 (0 << 0)
#define SICRH_TSOBI2_V2P5 (1 << 0)
-#elif defined(CONFIG_ARCH_MPC8309)
-/* SICR_1 */
-#define SICR_1_UART1_UART1S (0 << (30-2))
-#define SICR_1_UART1_UART1RTS (1 << (30-2))
-#define SICR_1_I2C_I2C (0 << (30-4))
-#define SICR_1_I2C_CKSTOP (1 << (30-4))
-#define SICR_1_IRQ_A_IRQ (0 << (30-6))
-#define SICR_1_IRQ_A_MCP (1 << (30-6))
-#define SICR_1_IRQ_B_IRQ (0 << (30-8))
-#define SICR_1_IRQ_B_CKSTOP (1 << (30-8))
-#define SICR_1_GPIO_A_GPIO (0 << (30-10))
-#define SICR_1_GPIO_A_SD (2 << (30-10))
-#define SICR_1_GPIO_A_DDR (3 << (30-10))
-#define SICR_1_GPIO_B_GPIO (0 << (30-12))
-#define SICR_1_GPIO_B_SD (2 << (30-12))
-#define SICR_1_GPIO_B_QE (3 << (30-12))
-#define SICR_1_GPIO_C_GPIO (0 << (30-14))
-#define SICR_1_GPIO_C_CAN (1 << (30-14))
-#define SICR_1_GPIO_C_DDR (2 << (30-14))
-#define SICR_1_GPIO_C_LCS (3 << (30-14))
-#define SICR_1_GPIO_D_GPIO (0 << (30-16))
-#define SICR_1_GPIO_D_CAN (1 << (30-16))
-#define SICR_1_GPIO_D_DDR (2 << (30-16))
-#define SICR_1_GPIO_D_LCS (3 << (30-16))
-#define SICR_1_GPIO_E_GPIO (0 << (30-18))
-#define SICR_1_GPIO_E_CAN (1 << (30-18))
-#define SICR_1_GPIO_E_DDR (2 << (30-18))
-#define SICR_1_GPIO_E_LCS (3 << (30-18))
-#define SICR_1_GPIO_F_GPIO (0 << (30-20))
-#define SICR_1_GPIO_F_CAN (1 << (30-20))
-#define SICR_1_GPIO_F_CK (2 << (30-20))
-#define SICR_1_USB_A_USBDR (0 << (30-22))
-#define SICR_1_USB_A_UART2S (1 << (30-22))
-#define SICR_1_USB_B_USBDR (0 << (30-24))
-#define SICR_1_USB_B_UART2S (1 << (30-24))
-#define SICR_1_USB_B_UART2RTS (2 << (30-24))
-#define SICR_1_USB_C_USBDR (0 << (30-26))
-#define SICR_1_USB_C_QE_EXT (3 << (30-26))
-#define SICR_1_FEC1_FEC1 (0 << (30-28))
-#define SICR_1_FEC1_GTM (1 << (30-28))
-#define SICR_1_FEC1_GPIO (2 << (30-28))
-#define SICR_1_FEC2_FEC2 (0 << (30-30))
-#define SICR_1_FEC2_GTM (1 << (30-30))
-#define SICR_1_FEC2_GPIO (2 << (30-30))
-/* SICR_2 */
-#define SICR_2_FEC3_FEC3 (0 << (30-0))
-#define SICR_2_FEC3_TMR (1 << (30-0))
-#define SICR_2_FEC3_GPIO (2 << (30-0))
-#define SICR_2_HDLC1_A_HDLC1 (0 << (30-2))
-#define SICR_2_HDLC1_A_GPIO (1 << (30-2))
-#define SICR_2_HDLC1_A_TDM1 (2 << (30-2))
-#define SICR_2_ELBC_A_LA (0 << (30-4))
-#define SICR_2_ELBC_B_LCLK (0 << (30-6))
-#define SICR_2_HDLC2_A_HDLC2 (0 << (30-8))
-#define SICR_2_HDLC2_A_GPIO (0 << (30-8))
-#define SICR_2_HDLC2_A_TDM2 (0 << (30-8))
-/* bits 10-11 unused */
-#define SICR_2_USB_D_USBDR (0 << (30-12))
-#define SICR_2_USB_D_GPIO (2 << (30-12))
-#define SICR_2_USB_D_QE_BRG (3 << (30-12))
-#define SICR_2_PCI_PCI (0 << (30-14))
-#define SICR_2_PCI_CPCI_HS (2 << (30-14))
-#define SICR_2_HDLC1_B_HDLC1 (0 << (30-16))
-#define SICR_2_HDLC1_B_GPIO (1 << (30-16))
-#define SICR_2_HDLC1_B_QE_BRG (2 << (30-16))
-#define SICR_2_HDLC1_B_TDM1 (3 << (30-16))
-#define SICR_2_HDLC1_C_HDLC1 (0 << (30-18))
-#define SICR_2_HDLC1_C_GPIO (1 << (30-18))
-#define SICR_2_HDLC1_C_TDM1 (2 << (30-18))
-#define SICR_2_HDLC2_B_HDLC2 (0 << (30-20))
-#define SICR_2_HDLC2_B_GPIO (1 << (30-20))
-#define SICR_2_HDLC2_B_QE_BRG (2 << (30-20))
-#define SICR_2_HDLC2_B_TDM2 (3 << (30-20))
-#define SICR_2_HDLC2_C_HDLC2 (0 << (30-22))
-#define SICR_2_HDLC2_C_GPIO (1 << (30-22))
-#define SICR_2_HDLC2_C_TDM2 (2 << (30-22))
-#define SICR_2_HDLC2_C_QE_BRG (3 << (30-22))
-#define SICR_2_QUIESCE_B (0 << (30-24))
-
#endif
/*
@@ -610,63 +531,6 @@
#define HRCWL_SVCOD_DIV_8 0x10000000
#define HRCWL_SVCOD_DIV_2 0x20000000
#define HRCWL_SVCOD_DIV_1 0x30000000
-#elif defined(CONFIG_ARCH_MPC8309)
-
-#define HRCWL_CEVCOD 0x000000C0
-#define HRCWL_CEVCOD_SHIFT 6
-/*
- * According to Errata MPC8309RMAD, Rev. 0.2, 9/2012
- * these are different than with 8360, 832x
- */
-#define HRCWL_CE_PLL_VCO_DIV_2 0x00000000
-#define HRCWL_CE_PLL_VCO_DIV_4 0x00000040
-#define HRCWL_CE_PLL_VCO_DIV_8 0x00000080
-
-#define HRCWL_CEPDF 0x00000020
-#define HRCWL_CEPDF_SHIFT 5
-#define HRCWL_CE_PLL_DIV_1X1 0x00000000
-#define HRCWL_CE_PLL_DIV_2X1 0x00000020
-
-#define HRCWL_CEPMF 0x0000001F
-#define HRCWL_CEPMF_SHIFT 0
-#define HRCWL_CE_TO_PLL_1X16_ 0x00000000
-#define HRCWL_CE_TO_PLL_1X2 0x00000002
-#define HRCWL_CE_TO_PLL_1X3 0x00000003
-#define HRCWL_CE_TO_PLL_1X4 0x00000004
-#define HRCWL_CE_TO_PLL_1X5 0x00000005
-#define HRCWL_CE_TO_PLL_1X6 0x00000006
-#define HRCWL_CE_TO_PLL_1X7 0x00000007
-#define HRCWL_CE_TO_PLL_1X8 0x00000008
-#define HRCWL_CE_TO_PLL_1X9 0x00000009
-#define HRCWL_CE_TO_PLL_1X10 0x0000000A
-#define HRCWL_CE_TO_PLL_1X11 0x0000000B
-#define HRCWL_CE_TO_PLL_1X12 0x0000000C
-#define HRCWL_CE_TO_PLL_1X13 0x0000000D
-#define HRCWL_CE_TO_PLL_1X14 0x0000000E
-#define HRCWL_CE_TO_PLL_1X15 0x0000000F
-#define HRCWL_CE_TO_PLL_1X16 0x00000010
-#define HRCWL_CE_TO_PLL_1X17 0x00000011
-#define HRCWL_CE_TO_PLL_1X18 0x00000012
-#define HRCWL_CE_TO_PLL_1X19 0x00000013
-#define HRCWL_CE_TO_PLL_1X20 0x00000014
-#define HRCWL_CE_TO_PLL_1X21 0x00000015
-#define HRCWL_CE_TO_PLL_1X22 0x00000016
-#define HRCWL_CE_TO_PLL_1X23 0x00000017
-#define HRCWL_CE_TO_PLL_1X24 0x00000018
-#define HRCWL_CE_TO_PLL_1X25 0x00000019
-#define HRCWL_CE_TO_PLL_1X26 0x0000001A
-#define HRCWL_CE_TO_PLL_1X27 0x0000001B
-#define HRCWL_CE_TO_PLL_1X28 0x0000001C
-#define HRCWL_CE_TO_PLL_1X29 0x0000001D
-#define HRCWL_CE_TO_PLL_1X30 0x0000001E
-#define HRCWL_CE_TO_PLL_1X31 0x0000001F
-
-#define HRCWL_SVCOD 0x30000000
-#define HRCWL_SVCOD_SHIFT 28
-#define HRCWL_SVCOD_DIV_2 0x00000000
-#define HRCWL_SVCOD_DIV_4 0x10000000
-#define HRCWL_SVCOD_DIV_8 0x20000000
-#define HRCWL_SVCOD_DIV_1 0x30000000
#endif
/*
@@ -1027,21 +891,6 @@
#define SCCR_SATACM_1 0x00000055
#define SCCR_SATACM_2 0x000000aa
#define SCCR_SATACM_3 0x000000ff
-#elif defined(CONFIG_ARCH_MPC8309)
-/* SCCR bits - MPC8309 specific */
-#define SCCR_SDHCCM 0x0c000000
-#define SCCR_SDHCCM_SHIFT 26
-#define SCCR_SDHCCM_0 0x00000000
-#define SCCR_SDHCCM_1 0x04000000
-#define SCCR_SDHCCM_2 0x08000000
-#define SCCR_SDHCCM_3 0x0c000000
-
-#define SCCR_USBDRCM 0x00c00000
-#define SCCR_USBDRCM_SHIFT 22
-#define SCCR_USBDRCM_0 0x00000000
-#define SCCR_USBDRCM_1 0x00400000
-#define SCCR_USBDRCM_2 0x00800000
-#define SCCR_USBDRCM_3 0x00c00000
#endif
#define SCCR_PCIEXP1CM 0x00300000
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-31 21:47:13 +0000