1 files changed, 130 insertions, 0 deletions
diff --git a/drivers/timer/tegra-timer.c b/drivers/timer/tegra-timer.c
new file mode 100644
index 0000000000..a867c649c3
--- /dev/null
+++ b/drivers/timer/tegra-timer.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Svyatoslav Ryhel <clamor95@gmail.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <timer.h>
+
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+
+#define TEGRA_OSC_CLK_ENB_L_SET		(NV_PA_CLK_RST_BASE + 0x320)
+#define TEGRA_OSC_SET_CLK_ENB_TMR	BIT(5)
+
+#define TEGRA_TIMER_USEC_CNTR		(NV_PA_TMRUS_BASE + 0)
+#define TEGRA_TIMER_USEC_CFG		(NV_PA_TMRUS_BASE + 4)
+
+#define TEGRA_TIMER_RATE		1000000 /* 1 MHz */
+
+/*
+ * On pre-DM stage timer should be left configured by
+ * previous bootloader for correct 1MHz clock.
+ * In the case of reset default value is set to 1/13 of
+ * CLK_M which should be decent enough to safely
+ * get to DM stage.
+ */
+u64 notrace timer_early_get_count(void)
+{
+	/* At this stage raw timer is used */
+	return readl(TEGRA_TIMER_USEC_CNTR);
+}
+
+unsigned long notrace timer_early_get_rate(void)
+{
+	return TEGRA_TIMER_RATE;
+}
+
+ulong timer_get_boot_us(void)
+{
+	return timer_early_get_count();
+}
+
+/*
+ * At moment of calling get_count, timer driver is already
+ * probed and is configured to have precise 1MHz clock.
+ * Tegra timer has a step of 1 microsecond which removes
+ * need of using adjusments involving uc_priv->clock_rate.
+ */
+static notrace u64 tegra_timer_get_count(struct udevice *dev)
+{
+	u32 val = timer_early_get_count();
+	return timer_conv_64(val);
+}
+
+static int tegra_timer_probe(struct udevice *dev)
+{
+	struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+	u32 usec_config, value;
+
+	/* Timer rate has to be set unconditionally */
+	uc_priv->clock_rate = TEGRA_TIMER_RATE;
+
+	/*
+	 * Configure microsecond timers to have 1MHz clock
+	 * Config register is 0xqqww, where qq is "dividend", ww is "divisor"
+	 * Uses n+1 scheme
+	 */
+	switch (clock_get_rate(CLOCK_ID_CLK_M)) {
+	case 12000000:
+		usec_config = 0x000b; /* (11+1)/(0+1) */
+		break;
+	case 12800000:
+		usec_config = 0x043f; /* (63+1)/(4+1) */
+		break;
+	case 13000000:
+		usec_config = 0x000c; /* (12+1)/(0+1) */
+		break;
+	case 16800000:
+		usec_config = 0x0453; /* (83+1)/(4+1) */
+		break;
+	case 19200000:
+		usec_config = 0x045f; /* (95+1)/(4+1) */
+		break;
+	case 26000000:
+		usec_config = 0x0019; /* (25+1)/(0+1) */
+		break;
+	case 38400000:
+		usec_config = 0x04bf; /* (191+1)/(4+1) */
+		break;
+	case 48000000:
+		usec_config = 0x002f; /* (47+1)/(0+1) */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Enable clock to timer hardware */
+	value = readl_relaxed(TEGRA_OSC_CLK_ENB_L_SET);
+	writel_relaxed(value | TEGRA_OSC_SET_CLK_ENB_TMR,
+		       TEGRA_OSC_CLK_ENB_L_SET);
+
+	writel_relaxed(usec_config, TEGRA_TIMER_USEC_CFG);
+
+	return 0;
+}
+
+static const struct timer_ops tegra_timer_ops = {
+	.get_count = tegra_timer_get_count,
+};
+
+static const struct udevice_id tegra_timer_ids[] = {
+	{ .compatible = "nvidia,tegra20-timer" },
+	{ .compatible = "nvidia,tegra30-timer" },
+	{ .compatible = "nvidia,tegra114-timer" },
+	{ .compatible = "nvidia,tegra124-timer" },
+	{ .compatible = "nvidia,tegra210-timer" },
+	{ }
+};
+
+U_BOOT_DRIVER(tegra_timer) = {
+	.name		= "tegra_timer",
+	.id		= UCLASS_TIMER,
+	.of_match	= tegra_timer_ids,
+	.probe		= tegra_timer_probe,
+	.ops		= &tegra_timer_ops,
+	.flags		= DM_FLAG_PRE_RELOC,
+};