diff options
Diffstat (limited to 'drivers/ram/stm32mp1/stm32mp1_ddr.c')
| -rw-r--r-- | drivers/ram/stm32mp1/stm32mp1_ddr.c | 69 |
1 files changed, 27 insertions, 42 deletions
diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index 0457166b12..4d78aa5cb1 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -68,7 +68,6 @@ struct reg_desc { #define DDRPHY_REG_REG_SIZE 11 /* st,phy-reg */ #define DDRPHY_REG_TIMING_SIZE 10 /* st,phy-timing */ -#define DDRPHY_REG_CAL_SIZE 12 /* st,phy-cal */ #define DDRCTL_REG_REG(x) DDRCTL_REG(x, stm32mp1_ddrctrl_reg) static const struct reg_desc ddr_reg[DDRCTL_REG_REG_SIZE] = { @@ -178,22 +177,6 @@ static const struct reg_desc ddrphy_timing[DDRPHY_REG_TIMING_SIZE] = { DDRPHY_REG_TIMING(mr3), }; -#define DDRPHY_REG_CAL(x) DDRPHY_REG(x, stm32mp1_ddrphy_cal) -static const struct reg_desc ddrphy_cal[DDRPHY_REG_CAL_SIZE] = { - DDRPHY_REG_CAL(dx0dllcr), - DDRPHY_REG_CAL(dx0dqtr), - DDRPHY_REG_CAL(dx0dqstr), - DDRPHY_REG_CAL(dx1dllcr), - DDRPHY_REG_CAL(dx1dqtr), - DDRPHY_REG_CAL(dx1dqstr), - DDRPHY_REG_CAL(dx2dllcr), - DDRPHY_REG_CAL(dx2dqtr), - DDRPHY_REG_CAL(dx2dqstr), - DDRPHY_REG_CAL(dx3dllcr), - DDRPHY_REG_CAL(dx3dqtr), - DDRPHY_REG_CAL(dx3dqstr), -}; - /************************************************************** * DYNAMIC REGISTERS: only used for debug purpose (read/modify) **************************************************************/ @@ -218,12 +201,24 @@ static const struct reg_desc ddrphy_dyn[] = { DDRPHY_REG_DYN(zq0sr1), DDRPHY_REG_DYN(dx0gsr0), DDRPHY_REG_DYN(dx0gsr1), + DDRPHY_REG_DYN(dx0dllcr), + DDRPHY_REG_DYN(dx0dqtr), + DDRPHY_REG_DYN(dx0dqstr), DDRPHY_REG_DYN(dx1gsr0), DDRPHY_REG_DYN(dx1gsr1), + DDRPHY_REG_DYN(dx1dllcr), + DDRPHY_REG_DYN(dx1dqtr), + DDRPHY_REG_DYN(dx1dqstr), DDRPHY_REG_DYN(dx2gsr0), DDRPHY_REG_DYN(dx2gsr1), + DDRPHY_REG_DYN(dx2dllcr), + DDRPHY_REG_DYN(dx2dqtr), + DDRPHY_REG_DYN(dx2dqstr), DDRPHY_REG_DYN(dx3gsr0), DDRPHY_REG_DYN(dx3gsr1), + DDRPHY_REG_DYN(dx3dllcr), + DDRPHY_REG_DYN(dx3dqtr), + DDRPHY_REG_DYN(dx3dqstr), }; #define DDRPHY_REG_DYN_SIZE ARRAY_SIZE(ddrphy_dyn) @@ -240,7 +235,6 @@ enum reg_type { REG_MAP, REGPHY_REG, REGPHY_TIMING, - REGPHY_CAL, #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE /* dynamic registers => managed in driver or not changed, * can be dumped in interactive mode @@ -264,8 +258,6 @@ struct ddr_reg_info { enum base_type base; }; -#define DDRPHY_REG_CAL(x) DDRPHY_REG(x, stm32mp1_ddrphy_cal) - const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = { [REG_REG] = { "static", ddr_reg, DDRCTL_REG_REG_SIZE, DDR_BASE}, @@ -279,8 +271,6 @@ const struct ddr_reg_info ddr_registers[REG_TYPE_NB] = { "static", ddrphy_reg, DDRPHY_REG_REG_SIZE, DDRPHY_BASE}, [REGPHY_TIMING] = { "timing", ddrphy_timing, DDRPHY_REG_TIMING_SIZE, DDRPHY_BASE}, -[REGPHY_CAL] = { - "cal", ddrphy_cal, DDRPHY_REG_CAL_SIZE, DDRPHY_BASE}, #ifdef CONFIG_STM32MP1_DDR_INTERACTIVE [REG_DYN] = { "dyn", ddr_dyn, DDR_REG_DYN_SIZE, DDR_BASE}, @@ -456,9 +446,6 @@ static u32 get_par_addr(const struct stm32mp1_ddr_config *config, case REGPHY_TIMING: par_addr = (u32)&config->p_timing; break; - case REGPHY_CAL: - par_addr = (u32)&config->p_cal; - break; case REG_DYN: case REGPHY_DYN: case REG_TYPE_NB: @@ -570,7 +557,7 @@ static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy) (u32)&phy->pgsr, pgsr, ret); } -void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir) +static void stm32mp1_ddrphy_init(struct stm32mp1_ddrphy *phy, u32 pir) { pir |= DDRPHYC_PIR_INIT; writel(pir, &phy->pir); @@ -639,7 +626,7 @@ static void wait_operating_mode(struct ddr_info *priv, int mode) log_debug("[0x%08x] stat = 0x%08x\n", (u32)&priv->ctl->stat, stat); } -void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) +static void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) { start_sw_done(ctl); /* quasi-dynamic register update*/ @@ -650,8 +637,8 @@ void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) wait_sw_done_ack(ctl); } -void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, - u32 rfshctl3, u32 pwrctl) +static void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, + u32 rfshctl3, u32 pwrctl) { start_sw_done(ctl); if (!(rfshctl3 & DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH)) @@ -774,8 +761,6 @@ start: */ set_reg(priv, REGPHY_REG, &config->p_reg); set_reg(priv, REGPHY_TIMING, &config->p_timing); - if (config->p_cal_present) - set_reg(priv, REGPHY_CAL, &config->p_cal); if (INTERACTIVE(STEP_PHY_INIT)) goto start; @@ -810,32 +795,32 @@ start: wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL); - if (config->p_cal_present) { - log_debug("DDR DQS training skipped.\n"); - } else { - log_debug("DDR DQS training : "); + log_debug("DDR DQS training : "); /* 8. Disable Auto refresh and power down by setting * - RFSHCTL3.dis_au_refresh = 1 * - PWRCTL.powerdown_en = 0 * - DFIMISC.dfiinit_complete_en = 0 */ - stm32mp1_refresh_disable(priv->ctl); + stm32mp1_refresh_disable(priv->ctl); /* 9. Program PUBL PGCR to enable refresh during training and rank to train * not done => keep the programed value in PGCR */ /* 10. configure PUBL PIR register to specify which training step to run */ - /* warning : RVTRN is not supported by this PUBL */ - stm32mp1_ddrphy_init(priv->phy, DDRPHYC_PIR_QSTRN); + /* RVTRN is excuted only on LPDDR2/LPDDR3 */ + if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) + pir = DDRPHYC_PIR_QSTRN; + else + pir = DDRPHYC_PIR_QSTRN | DDRPHYC_PIR_RVTRN; + stm32mp1_ddrphy_init(priv->phy, pir); /* 11. monitor PUB PGSR.IDONE to poll cpmpletion of training sequence */ - ddrphy_idone_wait(priv->phy); + ddrphy_idone_wait(priv->phy); /* 12. set back registers in step 8 to the orginal values if desidered */ - stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, - config->c_reg.pwrctl); - } /* if (config->p_cal_present) */ + stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, + config->c_reg.pwrctl); /* enable uMCTL2 AXI port 0 and 1 */ setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN); |