diff options
Diffstat (limited to 'drivers/pinctrl/pinctrl-at91.c')
| -rw-r--r-- | drivers/pinctrl/pinctrl-at91.c | 84 |
1 files changed, 79 insertions, 5 deletions
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 4bdad62dc9..27f274ff02 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -37,6 +37,9 @@ struct at91_pinctrl_priv { #define OUTPUT BIT(7) #define OUTPUT_VAL_SHIFT 8 #define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT) +#define SLEWRATE_SHIFT 9 +#define SLEWRATE_MASK 0x1 +#define SLEWRATE (SLEWRATE_MASK << SLEWRATE_SHIFT) #define DEBOUNCE BIT(16) #define DEBOUNCE_VAL_SHIFT 17 #define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT) @@ -50,10 +53,22 @@ struct at91_pinctrl_priv { * DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive * strength when there is no dt config for it. */ -#define DRIVE_STRENGTH_DEFAULT (0 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_LOW (1 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_MED (2 << DRIVE_STRENGTH_SHIFT) -#define DRIVE_STRENGTH_HI (3 << DRIVE_STRENGTH_SHIFT) +enum drive_strength_bit { + DRIVE_STRENGTH_BIT_DEF, + DRIVE_STRENGTH_BIT_LOW, + DRIVE_STRENGTH_BIT_MED, + DRIVE_STRENGTH_BIT_HI, +}; + +#define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \ + DRIVE_STRENGTH_SHIFT) + +enum slewrate_bit { + SLEWRATE_BIT_DIS, + SLEWRATE_BIT_ENA, +}; + +#define SLEWRATE_BIT_MSK(name) (SLEWRATE_BIT_##name << SLEWRATE_SHIFT) enum at91_mux { AT91_MUX_GPIO = 0, @@ -90,6 +105,7 @@ struct at91_pinctrl_mux_ops { void (*disable_schmitt_trig)(struct at91_port *pio, u32 mask); void (*set_drivestrength)(struct at91_port *pio, u32 pin, u32 strength); + void (*set_slewrate)(struct at91_port *pio, u32 pin, u32 slewrate); }; static u32 two_bit_pin_value_shift_amount(u32 pin) @@ -238,11 +254,52 @@ static void at91_mux_sam9x5_set_drivestrength(struct at91_port *pio, /* strength is inverse on SAM9x5s with our defines * 0 = hi, 1 = med, 2 = low, 3 = rsvd */ - setting = DRIVE_STRENGTH_HI - setting; + setting = DRIVE_STRENGTH_BIT_MSK(HI) - setting; set_drive_strength(reg, pin, setting); } +static void at91_mux_sam9x60_set_drivestrength(struct at91_port *pio, u32 pin, + u32 setting) +{ + void *reg = &pio->driver12; + u32 tmp; + + if (setting <= DRIVE_STRENGTH_BIT_DEF || + setting == DRIVE_STRENGTH_BIT_MED || + setting > DRIVE_STRENGTH_BIT_HI) + return; + + tmp = readl(reg); + + /* Strength is 0: low, 1: hi */ + if (setting == DRIVE_STRENGTH_BIT_LOW) + tmp &= ~BIT(pin); + else + tmp |= BIT(pin); + + writel(tmp, reg); +} + +static void at91_mux_sam9x60_set_slewrate(struct at91_port *pio, u32 pin, + u32 setting) +{ + void *reg = &pio->reserved12[3]; + u32 tmp; + + if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA) + return; + + tmp = readl(reg); + + if (setting == SLEWRATE_BIT_DIS) + tmp &= ~BIT(pin); + else + tmp |= BIT(pin); + + writel(tmp, reg); +} + static struct at91_pinctrl_mux_ops at91rm9200_ops = { .mux_A_periph = at91_mux_set_A_periph, .mux_B_periph = at91_mux_set_B_periph, @@ -273,6 +330,19 @@ static struct at91_pinctrl_mux_ops sama5d3_ops = { .set_drivestrength = at91_mux_sama5d3_set_drivestrength, }; +static struct at91_pinctrl_mux_ops sam9x60_ops = { + .mux_A_periph = at91_mux_pio3_set_A_periph, + .mux_B_periph = at91_mux_pio3_set_B_periph, + .mux_C_periph = at91_mux_pio3_set_C_periph, + .mux_D_periph = at91_mux_pio3_set_D_periph, + .set_deglitch = at91_mux_pio3_set_deglitch, + .set_debounce = at91_mux_pio3_set_debounce, + .set_pulldown = at91_mux_pio3_set_pulldown, + .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig, + .set_drivestrength = at91_mux_sam9x60_set_drivestrength, + .set_slewrate = at91_mux_sam9x60_set_slewrate, +}; + static void at91_mux_gpio_disable(struct at91_port *pio, u32 mask) { writel(mask, &pio->pdr); @@ -339,6 +409,9 @@ static int at91_pinconf_set(struct at91_pinctrl_mux_ops *ops, if (ops->set_drivestrength) ops->set_drivestrength(pio, pin, (config & DRIVE_STRENGTH) >> DRIVE_STRENGTH_SHIFT); + if (ops->set_slewrate) + ops->set_slewrate(pio, pin, + (config & SLEWRATE) >> SLEWRATE_SHIFT); return 0; } @@ -440,6 +513,7 @@ static const struct udevice_id at91_pinctrl_match[] = { { .compatible = "atmel,sama5d3-pinctrl", .data = (ulong)&sama5d3_ops }, { .compatible = "atmel,at91sam9x5-pinctrl", .data = (ulong)&at91sam9x5_ops }, { .compatible = "atmel,at91rm9200-pinctrl", .data = (ulong)&at91rm9200_ops }, + { .compatible = "microchip,sam9x60-pinctrl", .data = (ulong)&sam9x60_ops }, {} }; |