aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/pcie_imx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/pci/pcie_imx.c')
-rw-r--r--drivers/pci/pcie_imx.c27
1 files changed, 18 insertions, 9 deletions
diff --git a/drivers/pci/pcie_imx.c b/drivers/pci/pcie_imx.c
index 2cec3900e9..46ac01713f 100644
--- a/drivers/pci/pcie_imx.c
+++ b/drivers/pci/pcie_imx.c
@@ -14,6 +14,7 @@
#include <log.h>
#include <malloc.h>
#include <pci.h>
+#include <power/regulator.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/arch/crm_regs.h>
@@ -102,6 +103,7 @@ struct imx_pcie_priv {
void __iomem *cfg_base;
struct gpio_desc reset_gpio;
bool reset_active_high;
+ struct udevice *vpcie;
};
/*
@@ -530,7 +532,7 @@ static int imx6_pcie_init_phy(void)
return 0;
}
-__weak int imx6_pcie_toggle_power(void)
+int imx6_pcie_toggle_power(struct udevice *vpcie)
{
#ifdef CONFIG_PCIE_IMX_POWER_GPIO
gpio_request(CONFIG_PCIE_IMX_POWER_GPIO, "pcie_power");
@@ -540,10 +542,19 @@ __weak int imx6_pcie_toggle_power(void)
mdelay(20);
gpio_free(CONFIG_PCIE_IMX_POWER_GPIO);
#endif
+
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+ if (vpcie) {
+ regulator_set_enable(vpcie, false);
+ mdelay(20);
+ regulator_set_enable(vpcie, true);
+ mdelay(20);
+ }
+#endif
return 0;
}
-__weak int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high)
+int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high)
{
/*
* See 'PCI EXPRESS BASE SPECIFICATION, REV 3.0, SECTION 6.6.1'
@@ -559,12 +570,6 @@ __weak int imx6_pcie_toggle_reset(struct gpio_desc *gpio, bool active_high)
* configuration file and the condition below will handle the rest
* of the reset toggling.
*
- * In case your #PERST toggling logic is more complex, for example
- * connected via CPLD or somesuch, you can override this function
- * in your board file and implement reset logic as needed. You must
- * not forget to wait at least 20 ms after de-asserting #PERST in
- * this case either though.
- *
* In case your #PERST line of the PCIe EP device is not connected
* at all, your design is broken and you should fix your design,
* otherwise you will observe problems like for example the link
@@ -598,7 +603,7 @@ static int imx6_pcie_deassert_core_reset(struct imx_pcie_priv *priv)
{
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
- imx6_pcie_toggle_power();
+ imx6_pcie_toggle_power(priv->vpcie);
enable_pcie_clock();
@@ -717,6 +722,10 @@ static int imx_pcie_dm_probe(struct udevice *dev)
{
struct imx_pcie_priv *priv = dev_get_priv(dev);
+#if CONFIG_IS_ENABLED(DM_REGULATOR)
+ device_get_supply_regulator(dev, "vpcie-supply", &priv->vpcie);
+#endif
+
/* if PERST# valid from dt then assert it */
gpio_request_by_name(dev, "reset-gpio", 0, &priv->reset_gpio,
GPIOD_IS_OUT);