diff options
Diffstat (limited to 'board/barco/platinum/platinum_picon.c')
| -rw-r--r-- | board/barco/platinum/platinum_picon.c | 244 |
1 files changed, 0 insertions, 244 deletions
diff --git a/board/barco/platinum/platinum_picon.c b/board/barco/platinum/platinum_picon.c deleted file mode 100644 index 3fc29f9e08..0000000000 --- a/board/barco/platinum/platinum_picon.c +++ /dev/null @@ -1,244 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2014, Barco (www.barco.com) - * Copyright (C) 2014 Stefan Roese <sr@denx.de> - */ - -#include <common.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/iomux.h> -#include <asm/arch/mx6-pins.h> -#include <asm/mach-imx/iomux-v3.h> -#include <asm/mach-imx/mxc_i2c.h> -#include <i2c.h> -#include <miiphy.h> -#include <linux/delay.h> - -#include "platinum.h" - -#define GPIO_IP_NCONFIG IMX_GPIO_NR(5, 18) -#define GPIO_HK_NCONFIG IMX_GPIO_NR(7, 13) -#define GPIO_LS_NCONFIG IMX_GPIO_NR(5, 19) - -#define GPIO_I2C0_SEL0 IMX_GPIO_NR(5, 2) -#define GPIO_I2C0_SEL1 IMX_GPIO_NR(1, 11) -#define GPIO_I2C0_ENBN IMX_GPIO_NR(1, 13) - -#define GPIO_I2C2_SEL0 IMX_GPIO_NR(1, 17) -#define GPIO_I2C2_SEL1 IMX_GPIO_NR(1, 20) -#define GPIO_I2C2_ENBN IMX_GPIO_NR(1, 14) - -#define GPIO_USB_RESET IMX_GPIO_NR(1, 5) - -iomux_v3_cfg_t const ecspi1_pads[] = { - MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(ECSPI1_PAD_CLK), - MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO), - MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI), - MX6_PAD_CSI0_DAT7__ECSPI1_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS), - MX6_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(ECSPI_PAD_SS), - MX6_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(ECSPI_PAD_SS), -}; - -iomux_v3_cfg_t const ecspi2_pads[] = { - MX6_PAD_EIM_CS0__ECSPI2_SCLK | MUX_PAD_CTRL(ECSPI2_PAD_CLK), - MX6_PAD_EIM_OE__ECSPI2_MISO | MUX_PAD_CTRL(ECSPI_PAD_MISO), - MX6_PAD_EIM_CS1__ECSPI2_MOSI | MUX_PAD_CTRL(ECSPI_PAD_MOSI), - MX6_PAD_EIM_RW__ECSPI2_SS0 | MUX_PAD_CTRL(ECSPI_PAD_SS), - MX6_PAD_EIM_LBA__ECSPI2_SS1 | MUX_PAD_CTRL(ECSPI_PAD_SS), -}; - -iomux_v3_cfg_t const enet_pads[] = { - MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), - MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), -}; - -/* PHY nRESET */ -iomux_v3_cfg_t const phy_reset_pad = { - MX6_PAD_SD1_DAT2__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -iomux_v3_cfg_t const uart1_pads[] = { - MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -iomux_v3_cfg_t const uart4_pads[] = { - MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT16__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT17__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -iomux_v3_cfg_t const uart5_pads[] = { - MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT18__UART5_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), - MX6_PAD_CSI0_DAT19__UART5_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - -iomux_v3_cfg_t const i2c0_mux_pads[] = { - MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_SD2_CMD__GPIO1_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_SD2_DAT2__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -iomux_v3_cfg_t const i2c2_mux_pads[] = { - MX6_PAD_SD1_DAT1__GPIO1_IO17 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_SD2_DAT1__GPIO1_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -struct i2c_pads_info i2c_pad_info0 = { - .scl = { - .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC_SCL, - .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC_SCL, - .gp = IMX_GPIO_NR(5, 27) - }, - .sda = { - .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC, - .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC, - .gp = IMX_GPIO_NR(5, 26) - } -}; - -struct i2c_pads_info i2c_pad_info2 = { - .scl = { - .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC_SCL, - .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC_SCL, - .gp = IMX_GPIO_NR(1, 3) - }, - .sda = { - .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC, - .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC, - .gp = IMX_GPIO_NR(1, 6) - } -}; - -/* - * This enet related pin-muxing and GPIO handling is done - * in SPL U-Boot. For early initialization. And to give the - * PHY some time to come out of reset before the U-Boot - * ethernet driver tries to access its registers via MDIO. - */ -int platinum_setup_enet(void) -{ - struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; - unsigned phy_reset = IMX_GPIO_NR(1, 19); - - /* First configure PHY reset GPIO pin */ - imx_iomux_v3_setup_pad(phy_reset_pad); - - /* Reconfigure enet muxing while PHY is in reset */ - gpio_direction_output(phy_reset, 0); - imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); - mdelay(10); - gpio_set_value(phy_reset, 1); - udelay(100); - - /* set GPIO_16 as ENET_REF_CLK_OUT */ - setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK); - - return enable_fec_anatop_clock(0, ENET_50MHZ); -} - -int platinum_setup_i2c(void) -{ - imx_iomux_v3_setup_multiple_pads(i2c0_mux_pads, - ARRAY_SIZE(i2c0_mux_pads)); - imx_iomux_v3_setup_multiple_pads(i2c2_mux_pads, - ARRAY_SIZE(i2c2_mux_pads)); - - mdelay(10); - - /* Disable i2c mux 0 */ - gpio_direction_output(GPIO_I2C0_SEL0, 0); - gpio_direction_output(GPIO_I2C0_SEL1, 0); - gpio_direction_output(GPIO_I2C0_ENBN, 1); - - /* Disable i2c mux 1 */ - gpio_direction_output(GPIO_I2C2_SEL0, 0); - gpio_direction_output(GPIO_I2C2_SEL1, 0); - gpio_direction_output(GPIO_I2C2_ENBN, 1); - - udelay(10); - - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); - setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); - - /* Disable all leds */ - i2c_set_bus_num(0); - i2c_reg_write(0x60, 0x05, 0x55); - - return 0; -} - -int platinum_setup_spi(void) -{ - imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); - imx_iomux_v3_setup_multiple_pads(ecspi2_pads, ARRAY_SIZE(ecspi2_pads)); - - return 0; -} - -int platinum_setup_uart(void) -{ - imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); - imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); - imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads)); - - return 0; -} - -int platinum_phy_config(struct phy_device *phydev) -{ - /* Use generic infrastructure, no specific setup */ - if (phydev->drv->config) - phydev->drv->config(phydev); - - return 0; -} - -int platinum_init_gpio(void) -{ - /* Reset FPGA's */ - gpio_direction_output(GPIO_IP_NCONFIG, 0); - gpio_direction_output(GPIO_HK_NCONFIG, 0); - gpio_direction_output(GPIO_LS_NCONFIG, 0); - udelay(3); - gpio_set_value(GPIO_IP_NCONFIG, 1); - gpio_set_value(GPIO_HK_NCONFIG, 1); - gpio_set_value(GPIO_LS_NCONFIG, 1); - - /* no dmd configuration yet */ - - return 0; -} - -int platinum_init_usb(void) -{ - /* Reset usb hub */ - gpio_direction_output(GPIO_USB_RESET, 0); - udelay(100); - gpio_set_value(GPIO_USB_RESET, 1); - - return 0; -} - -int platinum_init_finished(void) -{ - /* Enable led 0 */ - i2c_set_bus_num(0); - i2c_reg_write(0x60, 0x05, 0x54); - - return 0; -} |