diff options
Diffstat (limited to 'arch/x86/cpu/ivybridge/lpc.c')
-rw-r--r-- | arch/x86/cpu/ivybridge/lpc.c | 74 |
1 files changed, 37 insertions, 37 deletions
diff --git a/arch/x86/cpu/ivybridge/lpc.c b/arch/x86/cpu/ivybridge/lpc.c index 43fdd31428..33b11a1799 100644 --- a/arch/x86/cpu/ivybridge/lpc.c +++ b/arch/x86/cpu/ivybridge/lpc.c @@ -29,7 +29,7 @@ static int pch_enable_apic(pci_dev_t dev) int i; /* Enable ACPI I/O and power management. Set SCI IRQ to IRQ9 */ - pci_write_config8(dev, ACPI_CNTL, 0x80); + x86_pci_write_config8(dev, ACPI_CNTL, 0x80); writel(0, IO_APIC_INDEX); writel(1 << 25, IO_APIC_DATA); @@ -72,9 +72,9 @@ static void pch_enable_serial_irqs(pci_dev_t dev) /* Set packet length and toggle silent mode bit for one frame. */ value = (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0); #ifdef CONFIG_SERIRQ_CONTINUOUS_MODE - pci_write_config8(dev, SERIRQ_CNTL, value); + x86_pci_write_config8(dev, SERIRQ_CNTL, value); #else - pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6)); + x86_pci_write_config8(dev, SERIRQ_CNTL, value | (1 << 6)); #endif } @@ -86,15 +86,15 @@ static int pch_pirq_init(const void *blob, int node, pci_dev_t dev) sizeof(route))) return -EINVAL; ptr = route; - pci_write_config8(dev, PIRQA_ROUT, *ptr++); - pci_write_config8(dev, PIRQB_ROUT, *ptr++); - pci_write_config8(dev, PIRQC_ROUT, *ptr++); - pci_write_config8(dev, PIRQD_ROUT, *ptr++); + x86_pci_write_config8(dev, PIRQA_ROUT, *ptr++); + x86_pci_write_config8(dev, PIRQB_ROUT, *ptr++); + x86_pci_write_config8(dev, PIRQC_ROUT, *ptr++); + x86_pci_write_config8(dev, PIRQD_ROUT, *ptr++); - pci_write_config8(dev, PIRQE_ROUT, *ptr++); - pci_write_config8(dev, PIRQF_ROUT, *ptr++); - pci_write_config8(dev, PIRQG_ROUT, *ptr++); - pci_write_config8(dev, PIRQH_ROUT, *ptr++); + x86_pci_write_config8(dev, PIRQE_ROUT, *ptr++); + x86_pci_write_config8(dev, PIRQF_ROUT, *ptr++); + x86_pci_write_config8(dev, PIRQG_ROUT, *ptr++); + x86_pci_write_config8(dev, PIRQH_ROUT, *ptr++); /* * TODO(sjg@chromium.org): U-Boot does not set up the interrupts @@ -116,7 +116,7 @@ static int pch_gpi_routing(const void *blob, int node, pci_dev_t dev) for (reg = 0, gpi = 0; gpi < ARRAY_SIZE(route); gpi++) reg |= route[gpi] << (gpi * 2); - pci_write_config32(dev, 0xb8, reg); + x86_pci_write_config32(dev, 0xb8, reg); return 0; } @@ -141,7 +141,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev) */ pwr_on = MAINBOARD_POWER_ON; - reg16 = pci_read_config16(dev, GEN_PMCON_3); + reg16 = x86_pci_read_config16(dev, GEN_PMCON_3); reg16 &= 0xfffe; switch (pwr_on) { case MAINBOARD_POWER_OFF: @@ -168,7 +168,7 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev) reg16 |= (1 << 12); /* Disable SLP stretch after SUS well */ - pci_write_config16(dev, GEN_PMCON_3, reg16); + x86_pci_write_config16(dev, GEN_PMCON_3, reg16); debug("Set power %s after power failure.\n", state); /* Set up NMI on errors. */ @@ -192,21 +192,21 @@ static int pch_power_options(const void *blob, int node, pci_dev_t dev) outb(reg8, 0x70); /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ - reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 = x86_pci_read_config16(dev, GEN_PMCON_1); reg16 &= ~(3 << 0); /* SMI# rate 1 minute */ reg16 &= ~(1 << 10); /* Disable BIOS_PCI_EXP_EN for native PME */ #if DEBUG_PERIODIC_SMIS /* Set DEBUG_PERIODIC_SMIS in pch.h to debug using periodic SMIs */ reg16 |= (3 << 0); /* Periodic SMI every 8s */ #endif - pci_write_config16(dev, GEN_PMCON_1, reg16); + x86_pci_write_config16(dev, GEN_PMCON_1, reg16); /* Set the board's GPI routing. */ ret = pch_gpi_routing(blob, node, dev); if (ret) return ret; - pmbase = pci_read_config16(dev, 0x40) & 0xfffe; + pmbase = x86_pci_read_config16(dev, 0x40) & 0xfffe; writel(pmbase + GPE0_EN, fdtdec_get_int(blob, node, "intel,gpe0-enable", 0)); @@ -231,11 +231,11 @@ static void pch_rtc_init(pci_dev_t dev) int rtc_failed; u8 reg8; - reg8 = pci_read_config8(dev, GEN_PMCON_3); + reg8 = x86_pci_read_config8(dev, GEN_PMCON_3); rtc_failed = reg8 & RTC_BATTERY_DEAD; if (rtc_failed) { reg8 &= ~RTC_BATTERY_DEAD; - pci_write_config8(dev, GEN_PMCON_3, reg8); + x86_pci_write_config8(dev, GEN_PMCON_3, reg8); } debug("rtc_failed = 0x%x\n", rtc_failed); @@ -258,7 +258,7 @@ static void pch_rtc_init(pci_dev_t dev) static void cpt_pm_init(pci_dev_t dev) { debug("CougarPoint PM init\n"); - pci_write_config8(dev, 0xa9, 0x47); + x86_pci_write_config8(dev, 0xa9, 0x47); setbits_le32(RCB_REG(0x2238), (1 << 6) | (1 << 0)); setbits_le32(RCB_REG(0x228c), 1 << 0); @@ -302,7 +302,7 @@ static void cpt_pm_init(pci_dev_t dev) static void ppt_pm_init(pci_dev_t dev) { debug("PantherPoint PM init\n"); - pci_write_config8(dev, 0xa9, 0x47); + x86_pci_write_config8(dev, 0xa9, 0x47); setbits_le32(RCB_REG(0x2238), 1 << 0); setbits_le32(RCB_REG(0x228c), 1 << 0); setbits_le16(RCB_REG(0x1100), (1 << 13) | (1 << 14)); @@ -356,9 +356,9 @@ static void enable_clock_gating(pci_dev_t dev) setbits_le32(RCB_REG(0x2234), 0xf); - reg16 = pci_read_config16(dev, GEN_PMCON_1); + reg16 = x86_pci_read_config16(dev, GEN_PMCON_1); reg16 |= (1 << 2) | (1 << 11); - pci_write_config16(dev, GEN_PMCON_1, reg16); + x86_pci_write_config16(dev, GEN_PMCON_1, reg16); pch_iobp_update(0xEB007F07, ~0UL, (1 << 31)); pch_iobp_update(0xEB004000, ~0UL, (1 << 7)); @@ -412,15 +412,15 @@ static void pch_lock_smm(pci_dev_t dev) #if TEST_SMM_FLASH_LOCKDOWN /* Now try this: */ debug("Locking BIOS to RO... "); - reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off", (reg8 & 1) ? "rw" : "ro"); reg8 &= ~(1 << 0); /* clear BIOSWE */ - pci_write_config8(dev, 0xdc, reg8); + x86_pci_write_config8(dev, 0xdc, reg8); reg8 |= (1 << 1); /* set BLE */ - pci_write_config8(dev, 0xdc, reg8); + x86_pci_write_config8(dev, 0xdc, reg8); debug("ok.\n"); - reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off", (reg8 & 1) ? "rw" : "ro"); @@ -428,9 +428,9 @@ static void pch_lock_smm(pci_dev_t dev) writeb(0, 0xfff00000); debug("Testing:\n"); reg8 |= (1 << 0); /* set BIOSWE */ - pci_write_config8(dev, 0xdc, reg8); + x86_pci_write_config8(dev, 0xdc, reg8); - reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off", (reg8 & 1) ? "rw" : "ro"); debug("Done.\n"); @@ -443,9 +443,9 @@ static void pch_disable_smm_only_flashing(pci_dev_t dev) u8 reg8; debug("Enabling BIOS updates outside of SMM... "); - reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ + reg8 = x86_pci_read_config8(dev, 0xdc); /* BIOS_CNTL */ reg8 &= ~(1 << 5); - pci_write_config8(dev, 0xdc, reg8); + x86_pci_write_config8(dev, 0xdc, reg8); } static void pch_fixups(pci_dev_t dev) @@ -453,9 +453,9 @@ static void pch_fixups(pci_dev_t dev) u8 gen_pmcon_2; /* Indicate DRAM init done for MRC S3 to know it can resume */ - gen_pmcon_2 = pci_read_config8(dev, GEN_PMCON_2); + gen_pmcon_2 = x86_pci_read_config8(dev, GEN_PMCON_2); gen_pmcon_2 |= (1 << 7); - pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2); + x86_pci_write_config8(dev, GEN_PMCON_2, gen_pmcon_2); /* Enable DMI ASPM in the PCH */ clrbits_le32(RCB_REG(0x2304), 1 << 10); @@ -478,10 +478,10 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev) return -EINVAL; /* Set COM1/COM2 decode range */ - pci_write_config16(dev, LPC_IO_DEC, 0x0010); + x86_pci_write_config16(dev, LPC_IO_DEC, 0x0010); /* Enable PS/2 Keyboard/Mouse, EC areas and COM1 */ - pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN | + x86_pci_write_config16(dev, LPC_EN, KBC_LPC_EN | MC_LPC_EN | GAMEL_LPC_EN | COMA_LPC_EN); /* Write all registers but use 0 if we run out of data */ @@ -491,7 +491,7 @@ int lpc_early_init(const void *blob, int node, pci_dev_t dev) if (i < count) reg = ptr->base | PCI_COMMAND_IO | (ptr->size << 16); - pci_write_config32(dev, LPC_GENX_DEC(i), reg); + x86_pci_write_config32(dev, LPC_GENX_DEC(i), reg); } return 0; @@ -514,7 +514,7 @@ int lpc_init(struct pci_controller *hose, pci_dev_t dev) return -ENOENT; /* Set the value for PCI command register. */ - pci_write_config16(dev, PCI_COMMAND, 0x000f); + x86_pci_write_config16(dev, PCI_COMMAND, 0x000f); /* IO APIC initialization. */ pch_enable_apic(dev); |