diff options
44 files changed, 4841 insertions, 107 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 5f9636f4e1..237f3940b4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -409,6 +409,7 @@ T: git https://source.denx.de/u-boot/custodians/u-boot-atmel.git F: arch/arm/mach-at91/ F: board/atmel/ F: drivers/cpu/at91_cpu.c +F: drivers/memory/atmel-ebi.c F: drivers/misc/microchip_flexcom.c F: drivers/timer/atmel_tcb_timer.c F: include/dt-bindings/mfd/atmel-flexcom.h diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts b/arch/arm/dts/at91-sam9x60_curiosity.dts index 7c5b6ae2b8..d6ae3d648d 100644 --- a/arch/arm/dts/at91-sam9x60_curiosity.dts +++ b/arch/arm/dts/at91-sam9x60_curiosity.dts @@ -49,6 +49,13 @@ atmel,pins = <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; + + usb1 { + pinctrl_usb_default: usb_default { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; }; }; }; @@ -89,3 +96,17 @@ phy-mode = "rmii"; status = "okay"; }; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioD 15 GPIO_ACTIVE_HIGH + &pioD 18 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts index eec183d5de..6d4b35ea96 100644 --- a/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts +++ b/arch/arm/dts/at91-sama5d27_wlsom1_ek.dts @@ -143,7 +143,32 @@ pinmux = <PIN_PC9__GPIO>; bias-pull-up; }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PA10__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PA16__GPIO>; + bias-disable; + }; }; }; }; }; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioA PIN_PA10 GPIO_ACTIVE_HIGH + 0 + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/dts/at91-sama5d2_icp.dts b/arch/arm/dts/at91-sama5d2_icp.dts index 2dffae9c5c..4f796c6c94 100644 --- a/arch/arm/dts/at91-sama5d2_icp.dts +++ b/arch/arm/dts/at91-sama5d2_icp.dts @@ -154,7 +154,29 @@ <PIN_PA13__SDMMC0_CD>; bias-disable; }; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PC17__GPIO>; + bias-disable; + }; + + pinctrl_usba_vbus: usba_vbus { + pinmux = <PIN_PD23__GPIO>; + bias-disable; + }; }; }; }; }; + +&usb1 { + num-ports = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + phy_type = "hsic"; + status = "okay"; +}; diff --git a/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi b/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi index d294ddb54a..a54cfaccbf 100644 --- a/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi +++ b/arch/arm/dts/at91-sama7g5ek-u-boot.dtsi @@ -10,13 +10,88 @@ * */ +#include "sama7g5-pinfunc.h" +#include <dt-bindings/reset/sama7g5-reset.h> +#include <dt-bindings/clock/at91.h> + / { chosen { u-boot,dm-pre-reloc; }; + utmi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + compatible = "microchip,sama7g5-usb-phy"; + sfr-phandle = <&sfr>; + reg = <0>; + clocks = <&utmi_clk USB_UTMI1>; + clock-names = "utmi_clk"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + compatible = "microchip,sama7g5-usb-phy"; + sfr-phandle = <&sfr>; + reg = <1>; + clocks = <&utmi_clk USB_UTMI2>; + clock-names = "utmi_clk"; + status = "disabled"; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + compatible = "microchip,sama7g5-usb-phy"; + sfr-phandle = <&sfr>; + reg = <2>; + clocks = <&utmi_clk USB_UTMI3>; + clock-names = "utmi_clk"; + status = "disabled"; + #phy-cells = <0>; + }; + }; + + utmi_clk: utmi-clk { + compatible = "microchip,sama7g5-utmi-clk"; + sfr-phandle = <&sfr>; + #clock-cells = <1>; + clocks = <&pmc PMC_TYPE_CORE 27>; + clock-names = "utmi_clk"; + resets = <&reset_controller SAMA7G5_RESET_USB_PHY1>, + <&reset_controller SAMA7G5_RESET_USB_PHY2>, + <&reset_controller SAMA7G5_RESET_USB_PHY3>; + reset-names = "usb0_reset", "usb1_reset", "usb2_reset"; + }; + soc { u-boot,dm-pre-reloc; + + usb2: usb@400000 { + compatible = "microchip,sama7g5-ohci", "usb-ohci"; + reg = <0x00400000 0x100000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 106>, <&utmi_clk USB_UTMI1>, <&usb_clk>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb3: usb@500000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00500000 0x100000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_clk>, <&pmc PMC_TYPE_PERIPHERAL 106>; + clock-names = "usb_clk", "ehci_clk"; + status = "disabled"; + }; + + sfr: sfr@e1624000 { + compatible = "microchip,sama7g5-sfr", "syscon"; + reg = <0xe1624000 0x4000>; + }; }; }; @@ -38,6 +113,11 @@ &pioA { u-boot,dm-pre-reloc; + + pinctrl_usb_default: usb_default { + pinmux = <PIN_PC6__GPIO>; + bias-disable; + }; }; &pit64b0 { @@ -60,3 +140,31 @@ u-boot,dm-pre-reloc; }; +&usb2 { + num-ports = <3>; + atmel,vbus-gpio = <0 + 0 + &pioA PIN_PC6 GPIO_ACTIVE_HIGH + >; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + phys = <&usb_phy2>; + phy-names = "usb"; + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb_phy2 { + status = "okay"; +}; diff --git a/arch/arm/dts/at91-sama7g5ek.dts b/arch/arm/dts/at91-sama7g5ek.dts index aed84f15a1..9b247fcaf6 100644 --- a/arch/arm/dts/at91-sama7g5ek.dts +++ b/arch/arm/dts/at91-sama7g5ek.dts @@ -45,13 +45,13 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_key_gpio_default>; - bp1 { + button { label = "PB_USER"; gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>; linux,code = <KEY_PROG1>; @@ -244,8 +244,8 @@ regulators { vdd_3v3: VDD_IO { regulator-name = "VDD_IO"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -264,8 +264,8 @@ vddioddr: VDD_DDR { regulator-name = "VDD_DDR"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1450000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -285,8 +285,8 @@ vddcore: VDD_CORE { regulator-name = "VDD_CORE"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-always-on; @@ -306,7 +306,7 @@ vddcpu: VDD_OTHER { regulator-name = "VDD_OTHER"; regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1850000>; + regulator-max-microvolt = <1250000>; regulator-initial-mode = <2>; regulator-allowed-modes = <2>, <4>; regulator-ramp-delay = <3125>; @@ -326,8 +326,8 @@ vldo1: LDO1 { regulator-name = "LDO1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3700000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-always-on; regulator-state-standby { @@ -707,7 +707,6 @@ ck_cd_rstn_vddsel { pinmux = <PIN_PA0__SDMMC0_CK>, <PIN_PA2__SDMMC0_RSTN>, - <PIN_PA14__SDMMC0_CD>, <PIN_PA11__SDMMC0_DS>; slew-rate = <0>; bias-pull-up; diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi index a5c429eb3a..2b93d08938 100644 --- a/arch/arm/dts/sam9x60.dtsi +++ b/arch/arm/dts/sam9x60.dtsi @@ -69,6 +69,50 @@ #size-cells = <1>; ranges; + usb1: usb@600000 { + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + reg = <0x00600000 0x100000>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 21>; + clock-names = "ohci_clk", "hclk", "uhpck"; + status = "disabled"; + }; + + usb2: usb@700000 { + compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; + reg = <0x00700000 0x100000>; + clocks = <&pmc PMC_TYPE_CORE 8>, <&pmc PMC_TYPE_PERIPHERAL 22>; + clock-names = "usb_clk", "ehci_clk"; + assigned-clocks = <&pmc PMC_TYPE_CORE 8>; + assigned-clock-rates = <480000000>; + status = "disabled"; + }; + + ebi: ebi@10000000 { + compatible = "microchip,sam9x60-ebi"; + #address-cells = <2>; + #size-cells = <1>; + atmel,smc = <&smc>; + microchip,sfr = <&sfr>; + reg = <0x10000000 0x60000000>; + ranges = <0x0 0x0 0x10000000 0x10000000 + 0x1 0x0 0x20000000 0x10000000 + 0x2 0x0 0x30000000 0x10000000 + 0x3 0x0 0x40000000 0x10000000 + 0x4 0x0 0x50000000 0x10000000 + 0x5 0x0 0x60000000 0x10000000>; + clocks = <&pmc PMC_TYPE_CORE 11>; + status = "disabled"; + + nand_controller: nand-controller { + compatible = "microchip,sam9x60-nand-controller"; + ecc-engine = <&pmecc>; + #address-cells = <2>; + #size-cells = <1>; + ranges; + status = "disabled"; + }; + }; + sdhci0: sdhci-host@80000000 { compatible = "microchip,sam9x60-sdhci"; reg = <0x80000000 0x300>; @@ -82,6 +126,19 @@ pinctrl-0 = <&pinctrl_sdhci0>; }; + sdhci1: sdhci-host@90000000 { + compatible = "microchip,sam9x60-sdhci"; + reg = <0x90000000 0x300>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>; + clock-names = "hclock", "multclk"; + assigned-clocks = <&pmc PMC_TYPE_GCK 26>; + assigned-clock-rates = <100000000>; + assigned-clock-parents = <&pmc PMC_TYPE_CORE 10>; /* ID_PLL_A_DIV */ + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhci1>; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -119,6 +176,11 @@ status = "disabled"; }; + sfr: sfr@f8050000 { + compatible = "microchip,sam9x60-sfr", "syscon"; + reg = <0xf8050000 0x100>; + }; + dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; @@ -180,6 +242,29 @@ (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI | AT91_PINCTRL_SLEWRATE_ENA)>; /* PA20 DAT3 periph A with pullup */ }; }; + + sdhci1 { + pinctrl_sdhci1: sdhci1 { + atmel,pins = + <AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA13 CK periph B */ + AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA12 CMD periph B with pullup */ + AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA11 DAT0 periph B with pullup */ + AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA2 DAT1 periph B with pullup */ + AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI) /* PA3 DAT2 periph B with pullup */ + AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>; /* PA4 DAT3 periph B with pullup */ + }; + }; + }; + + pmecc: ecc-engine@ffffe000 { + compatible = "microchip,sam9x60-pmecc", "atmel,at91sam9g45-pmecc"; + reg = <0xffffe000 0x300>, + <0xffffe600 0x100>; + }; + + smc: smc@ffffea00 { + compatible = "microchip,sam9x60-smc", "atmel,at91sam9260-smc", "syscon"; + reg = <0xffffea00 0x100>; }; pioA: gpio@fffff400 { diff --git a/arch/arm/dts/sam9x60ek.dts b/arch/arm/dts/sam9x60ek.dts index eb44868a3e..45e2f4cc40 100644 --- a/arch/arm/dts/sam9x60ek.dts +++ b/arch/arm/dts/sam9x60ek.dts @@ -80,6 +80,44 @@ }; pinctrl { + nand { + pinctrl_nand_oe_we: nand-oe-we-0 { + atmel,pins = + <AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>; + }; + + pinctrl_nand_rb: nand-rb-0 { + atmel,pins = + <AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + + pinctrl_nand_cs: nand-cs-0 { + atmel,pins = + <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; + }; + }; + + ebi { + pinctrl_ebi_data_0_7: ebi-data-lsb-0 { + atmel,pins = + <AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>; + }; + + pinctrl_ebi_addr_nand: ebi-addr-0 { + atmel,pins = + <AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS) + AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>; + }; + }; + pinctrl_qspi: qspi { atmel,pins = <AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE @@ -101,6 +139,78 @@ <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; + usb1 { + pinctrl_usb_default: usb_default { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; + + }; + }; + }; +}; + +&ebi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>; + status = "okay"; + + nand_controller: nand-controller { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>; + status = "okay"; + + nand@3 { + reg = <0x3 0x0 0x800000>; + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + nand-on-flash-bbt; + label = "atmel_nand"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0xc0000>; + }; + + ubootenvred@100000 { + label = "U-Boot Env Redundant"; + reg = <0x100000 0x40000>; + }; + + ubootenv@140000 { + label = "U-Boot Env"; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x1f800000>; + }; }; }; }; @@ -110,3 +220,17 @@ phy-mode = "rmii"; status = "okay"; }; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioD 15 GPIO_ACTIVE_HIGH + &pioD 16 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi index 790b746ed1..187c2ff2fb 100644 --- a/arch/arm/dts/sama5d2.dtsi +++ b/arch/arm/dts/sama5d2.dtsi @@ -84,7 +84,6 @@ reg = <0xf0014000 0x160>; #address-cells = <1>; #size-cells = <0>; - #interrupt-cells = <1>; u-boot,dm-pre-reloc; main: mainck { diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi index d38090d7dd..6388a60e53 100644 --- a/arch/arm/dts/sama7g5.dtsi +++ b/arch/arm/dts/sama7g5.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/clk/at91.h> #include <dt-bindings/dma/at91.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/at91-usart.h> / { model = "Microchip SAMA7G5 family SoC"; @@ -195,11 +196,11 @@ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; }; pmc: pmc@e0018000 { @@ -211,6 +212,13 @@ clock-names = "td_slck", "md_slck", "main_xtal", "main_rc"; }; + reset_controller: reset-controller@e001d000 { + compatible = "microchip,sama7g5-rstc"; + reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>; + #reset-cells = <1>; + clocks = <&clk32k 0>; + }; + shdwc: shdwc@e001d010 { compatible = "microchip,sama7g5-shdwc", "syscon"; reg = <0xe001d010 0x10>; @@ -229,13 +237,6 @@ clocks = <&clk32k 0>; }; - reset_controller: rstc@e001d000 { - compatible = "microchip,sama7g5-rstc", "microchip,sam9x60-rstc"; - reg = <0xe001d000 0xc>, <0xe001d0e4 0x4>; - #reset-cells = <1>; - clocks = <&clk32k 0>; - }; - clk32k: clock-controller@e001d050 { compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc"; reg = <0xe001d050 0x4>; @@ -620,6 +621,7 @@ uart0: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; clock-names = "usart"; @@ -668,6 +670,7 @@ uart3: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmc PMC_TYPE_PERIPHERAL 41>; clock-names = "usart"; @@ -711,6 +714,7 @@ uart4: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmc PMC_TYPE_PERIPHERAL 42>; clock-names = "usart"; @@ -736,6 +740,7 @@ uart7: serial@200 { compatible = "atmel,at91sam9260-usart"; reg = <0x200 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pmc PMC_TYPE_PERIPHERAL 45>; clock-names = "usart"; @@ -884,9 +889,9 @@ #address-cells = <1>; #size-cells = <0>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>, - <&dma0 AT91_XDMAC_DT_PERID(28)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(28)>, + <&dma0 AT91_XDMAC_DT_PERID(27)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; diff --git a/arch/arm/mach-at91/armv7/sama7g5_devices.c b/arch/arm/mach-at91/armv7/sama7g5_devices.c index 0b702c7fb7..6f2c1fc914 100644 --- a/arch/arm/mach-at91/armv7/sama7g5_devices.c +++ b/arch/arm/mach-at91/armv7/sama7g5_devices.c @@ -4,7 +4,31 @@ * Eugen Hristev <eugen.hristev@microchip.com> */ +#include <asm/arch/sama7g5.h> + char *get_cpu_name(void) { - return "SAMA7G5"; + unsigned int extension_id = get_extension_chip_id(); + + if (cpu_is_sama7g5()) + switch (extension_id) { + case ARCH_EXID_SAMA7G51: + return "SAMA7G51"; + case ARCH_EXID_SAMA7G52: + return "SAMA7G52"; + case ARCH_EXID_SAMA7G53: + return "SAMA7G53"; + case ARCH_EXID_SAMA7G54: + return "SAMA7G54"; + case ARCH_EXID_SAMA7G54_D1G: + return "SAMA7G54 1Gb DDR3L SiP"; + case ARCH_EXID_SAMA7G54_D2G: + return "SAMA7G54 2Gb DDR3L SiP"; + case ARCH_EXID_SAMA7G54_D4G: + return "SAMA7G54 4Gb DDR3L SiP"; + default: + return "Unknown CPU type"; + } + else + return "Unknown CPU type"; } diff --git a/arch/arm/mach-at91/include/mach/sama7-sfr.h b/arch/arm/mach-at91/include/mach/sama7-sfr.h new file mode 100644 index 0000000000..a987ff5465 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/sama7-sfr.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Microchip SFR (Special Function Registers) registers for SAMA7 family. + * + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries + * + * Author: Cristian Birsan <cristian.birsan@microchip.com> + */ + +#ifndef _LINUX_MFD_SYSCON_AT91_SAMA7_SFR_H +#define _LINUX_MFD_SYSCON_AT91_SAMA7_SFR_H + +#define SAMA7_SFR_OHCIICR 0x00 /* OHCI INT Configuration Register */ +#define SAMA7_SFR_OHCIISR 0x04 /* OHCI INT Status Register */ +/* 0x08 ~ 0xe3: Reserved */ +#define SAMA7_SFR_WPMR 0xe4 /* Write Protection Mode Register */ +#define SAMA7_SFR_WPSR 0xe4 /* Write Protection Status Register */ +/* 0xec ~ 0x200b: Reserved */ +#define SAMA7_SFR_DEBUG 0x200c /* Debug Register */ + +/* 0x2010 ~ 0x2027: Reserved */ +#define SAMA7_SFR_EHCIOHCI 0x2020 /* EHCI OHCI Clock Configuration Reg */ + +#define SAMA7_SFR_HSS_AXI_QOS 0x2028 /* HSS AXI QOS Register */ +#define SAMA7_SFR_UDDRC 0x202c /* UDDRC Register */ +#define SAMA7_SFR_CAN_SRAM_SEL 0x2030 /* CAN SRAM Select. Register */ +/* 0x2034 ~ 0x203f: Reserved */ + +#define SAMA7_SFR_UTMI0 0x2040 +#define SAMA7_SFR_UTMI0R(x) (SAMA7_SFR_UTMI0 + 4 * (x)) + +#define SAMA7_SFR_UTMI0R0 0x2040 /* UTMI0 Configuration Register */ +#define SAMA7_SFR_UTMI0R1 0x2044 /* UTMI1 Configuration Register */ +#define SAMA7_SFR_UTMI0R2 0x2048 /* UTMI2 Configuration Register */ + +/* Field definitions */ +#define SAMA7_SFR_OHCIICR_ARIE BIT(0) +#define SAMA7_SFR_OHCIICR_APPSTART BIT(1) +#define SAMA7_SFR_OHCIICR_USB_SUSP(x) BIT(8 + (x)) +#define SAMA7_SFR_OHCIICR_USB_SUSPEND GENMASK(10, 8) + +#define SAMA7_SFR_OHCIISR_RIS(x) BIT(x) + +#define SAMA7_SFR_WPMR_WPEN BIT(0) +#define SAMA7_SFR_WPMR_KEY 0x53465200 /* SFR in ASCII*/ +#define SAMA7_SFR_WPMR_WPKEY_MASK GENMASK(31, 8) + +#define SAMA7_SFR_WPSR_WPSRC_MASK GENMASK(23, 8) +#define SAMA7_SFR_WPSR_WPVS_MASK BIT(0) + +#define SAMA7_SFR_CAN_SRAM_UPPER(x) BIT(x) + +#define SAMA7_SFR_UTMI_RX_VBUS BIT(25) /* VBUS Valid bit */ +#define SAMA7_SFR_UTMI_RX_TX_PREEM_AMP_TUNE_1X BIT(23) /* TXPREEMPAMPTUNE 1x */ +#define SAMA7_SFR_UTMI_COMMONON BIT(3) /* PLL Common ON bit */ + +#define SAMA7_SFR_EHCIOHCI_PHYCLK BIT(1) /* Alternate PHY Clk */ + +#endif /* _LINUX_MFD_SYSCON_AT91_SAMA7_SFR_H */ diff --git a/arch/arm/mach-at91/include/mach/sama7g5.h b/arch/arm/mach-at91/include/mach/sama7g5.h index ae43e8700b..621a26f6eb 100644 --- a/arch/arm/mach-at91/include/mach/sama7g5.h +++ b/arch/arm/mach-at91/include/mach/sama7g5.h @@ -67,7 +67,35 @@ #define ATMEL_BASE_PIT64BC ATMEL_BASE_PIT64B0 +/* SAMA7G5 series chip id definitions */ +#define ARCH_ID_SAMA7G5 0x80162100 +#define ARCH_EXID_SAMA7G51 0x00000003 +#define ARCH_EXID_SAMA7G52 0x00000002 +#define ARCH_EXID_SAMA7G53 0x00000001 +#define ARCH_EXID_SAMA7G54 0x00000000 +#define ARCH_EXID_SAMA7G54_D1G 0x00000018 +#define ARCH_EXID_SAMA7G54_D2G 0x00000020 +#define ARCH_EXID_SAMA7G54_D4G 0x00000028 + +#define cpu_is_sama7g5() (get_chip_id() == ARCH_ID_SAMA7G5) +#define cpu_is_sama7g51() (cpu_is_sama7g5() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA7G51)) +#define cpu_is_sama7g52() (cpu_is_sama7g5() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA7G52)) +#define cpu_is_sama7g53() (cpu_is_sama7g5() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA7G53)) +#define cpu_is_sama7g54() (cpu_is_sama7g5() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA7G54)) +#define cpu_is_sama7g54d1g() (cpu_is_sama7g5() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA7G54_D1G)) +#define cpu_is_sama7g54d2g() (cpu_is_sama7g5() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA7G54_D2G)) +#define cpu_is_sama7g54d4g() (cpu_is_sama7g5() && \ + (get_extension_chip_id() == ARCH_EXID_SAMA7G54_D4G)) + #ifndef __ASSEMBLY__ +unsigned int get_chip_id(void); +unsigned int get_extension_chip_id(void); char *get_cpu_name(void); #endif diff --git a/board/atmel/sam9x60_curiosity/MAINTAINERS b/board/atmel/sam9x60_curiosity/MAINTAINERS index 3e1dce2980..0d9369e027 100644 --- a/board/atmel/sam9x60_curiosity/MAINTAINERS +++ b/board/atmel/sam9x60_curiosity/MAINTAINERS @@ -5,3 +5,4 @@ S: Maintained F: board/atmel/sam9x60_curiosity/ F: include/configs/sam9x60_curiosity.h F: configs/sam9x60_curiosity_mmc_defconfig +F: configs/sam9x60_curiosity_mmc1_defconfig diff --git a/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c b/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c index 8cf67d148d..0fe0de9fde 100644 --- a/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c +++ b/board/atmel/sam9x60_curiosity/sam9x60_curiosity.c @@ -25,6 +25,13 @@ DECLARE_GLOBAL_DATA_PTR; void at91_prepare_cpu_var(void); +static void board_leds_init(void) +{ + at91_set_pio_output(AT91_PIO_PORTD, 17, 0); /* LED RED */ + at91_set_pio_output(AT91_PIO_PORTD, 19, 0); /* LED GREEN */ + at91_set_pio_output(AT91_PIO_PORTD, 21, 1); /* LED BLUE */ +} + int board_late_init(void) { at91_prepare_cpu_var(); @@ -62,6 +69,9 @@ int board_init(void) { /* address of boot parameters */ gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100; + + board_leds_init(); + return 0; } diff --git a/board/atmel/sam9x60ek/sam9x60ek.c b/board/atmel/sam9x60ek/sam9x60ek.c index a3e35f3066..3fbfca4acc 100644 --- a/board/atmel/sam9x60ek/sam9x60ek.c +++ b/board/atmel/sam9x60ek/sam9x60ek.c @@ -24,61 +24,12 @@ DECLARE_GLOBAL_DATA_PTR; void at91_prepare_cpu_var(void); -#ifdef CONFIG_CMD_NAND -static void sam9x60ek_nand_hw_init(void) +static void board_leds_init(void) { - struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; - struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR; - unsigned int csa; - - at91_pio3_set_a_periph(AT91_PIO_PORTD, 0, 1); /* NAND OE */ - at91_pio3_set_a_periph(AT91_PIO_PORTD, 1, 1); /* NAND WE */ - at91_pio3_set_a_periph(AT91_PIO_PORTD, 2, 0); /* NAND ALE */ - at91_pio3_set_a_periph(AT91_PIO_PORTD, 3, 0); /* NAND CLE */ - /* Enable NandFlash */ - at91_set_gpio_output(CFG_SYS_NAND_ENABLE_PIN, 1); - /* Configure RDY/BSY */ - at91_set_gpio_input(CFG_SYS_NAND_READY_PIN, 1); - at91_pio3_set_a_periph(AT91_PIO_PORTD, 6, 1); - at91_pio3_set_a_periph(AT91_PIO_PORTD, 7, 1); - at91_pio3_set_a_periph(AT91_PIO_PORTD, 8, 1); - at91_pio3_set_a_periph(AT91_PIO_PORTD, 9, 1); - at91_pio3_set_a_periph(AT91_PIO_PORTD, 10, 1); - at91_pio3_set_a_periph(AT91_PIO_PORTD, 11, 1); - at91_pio3_set_a_periph(AT91_PIO_PORTD, 12, 1); - at91_pio3_set_a_periph(AT91_PIO_PORTD, 13, 1); - - at91_periph_clk_enable(ATMEL_ID_PIOD); - - /* Enable CS3 */ - csa = readl(&sfr->ebicsa); - csa |= AT91_SFR_CCFG_EBI_CSA(3, 1) | AT91_SFR_CCFG_NFD0_ON_D16; - - /* Configure IO drive */ - csa &= ~AT91_SFR_CCFG_EBI_DRIVE_SAM9X60; - - writel(csa, &sfr->ebicsa); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(4), &smc->cs[3].setup); - - writel(AT91_SMC_PULSE_NWE(10) | AT91_SMC_PULSE_NCS_WR(20) | - AT91_SMC_PULSE_NRD(10) | AT91_SMC_PULSE_NCS_RD(20), - &smc->cs[3].pulse); - - writel(AT91_SMC_CYCLE_NWE(20) | AT91_SMC_CYCLE_NRD(20), - &smc->cs[3].cycle); - - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | -#ifdef CONFIG_SYS_NAND_DBW_16 - AT91_SMC_MODE_DBW_16 | -#else /* CONFIG_SYS_NAND_DBW_8 */ - AT91_SMC_MODE_DBW_8 | -#endif - AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(15), - &smc->cs[3].mode); + at91_set_pio_output(AT91_PIO_PORTB, 11, 0); /* LED RED */ + at91_set_pio_output(AT91_PIO_PORTB, 12, 0); /* LED GREEN */ + at91_set_pio_output(AT91_PIO_PORTB, 13, 1); /* LED BLUE */ } -#endif #ifdef CONFIG_BOARD_LATE_INIT int board_late_init(void) @@ -122,9 +73,8 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = CFG_SYS_SDRAM_BASE + 0x100; -#ifdef CONFIG_CMD_NAND - sam9x60ek_nand_hw_init(); -#endif + board_leds_init(); + return 0; } diff --git a/configs/sam9x60_curiosity_mmc1_defconfig b/configs/sam9x60_curiosity_mmc1_defconfig new file mode 100644 index 0000000000..42aba3d630 --- /dev/null +++ b/configs/sam9x60_curiosity_mmc1_defconfig @@ -0,0 +1,92 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_ARCH_AT91=y +CONFIG_TEXT_BASE=0x23f00000 +CONFIG_SYS_MALLOC_LEN=0x81000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_TARGET_SAM9X60_CURIOSITY=y +CONFIG_ATMEL_LEGACY=y +CONFIG_NR_DRAM_BANKS=8 +CONFIG_ENV_SIZE=0x4000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sam9x60_curiosity" +CONFIG_SYS_PROMPT="U-Boot> " +CONFIG_DEBUG_UART_BASE=0xfffff200 +CONFIG_DEBUG_UART_CLOCK=200000000 +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_SYS_LOAD_ADDR=0x22000000 +CONFIG_DEBUG_UART=y +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000bf00 +CONFIG_FIT=y +CONFIG_SD_BOOT=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mmcblk1p2 rw rootwait" +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="fatload mmc 1:1 0x21000000 at91-sam9x60_curiosity.dtb; fatload mmc 1:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000" +CONFIG_SYS_CONSOLE_IS_IN_ENV=y +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_MISC_INIT_R=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=256 +CONFIG_SYS_PBSIZE=281 +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_BOOTP_BOOTFILESIZE=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_HASH=y +CONFIG_HASH_VERIFY=y +CONFIG_CMD_FAT=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_ENV_FAT_DEVICE_AND_PART="1:1" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_DM=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_CLK_CCF=y +CONFIG_CLK_AT91=y +CONFIG_AT91_GENERIC_CLK=y +CONFIG_AT91_SAM9X60_PLL=y +CONFIG_CPU=y +CONFIG_AT91_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_AT91=y +CONFIG_ATMEL_EBI=y +CONFIG_MFD_ATMEL_SMC=y +CONFIG_I2C_EEPROM=y +CONFIG_MICROCHIP_FLEXCOM=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ATMEL=y +CONFIG_MTD=y +CONFIG_DM_MTD=y +CONFIG_MTD_RAW_NAND=y +CONFIG_DM_NAND_ATMEL=y +CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_PHY_MICREL=y +CONFIG_MACB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_AT91=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ATMEL_USART=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_AT91=y +CONFIG_TIMER=y +CONFIG_MCHP_PIT64B_TIMER=y +CONFIG_W1=y +CONFIG_W1_GPIO=y +CONFIG_W1_EEPROM=y +CONFIG_W1_EEPROM_DS24XXX=y +CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/configs/sam9x60ek_mmc_defconfig b/configs/sam9x60ek_mmc_defconfig index f83cbf6f15..268a485456 100644 --- a/configs/sam9x60ek_mmc_defconfig +++ b/configs/sam9x60ek_mmc_defconfig @@ -52,6 +52,8 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_FAT=y CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_CLK=y CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y @@ -61,15 +63,16 @@ CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_AT91=y +CONFIG_ATMEL_EBI=y +CONFIG_MFD_ATMEL_SMC=y CONFIG_I2C_EEPROM=y CONFIG_MICROCHIP_FLEXCOM=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ATMEL=y CONFIG_MTD=y +CONFIG_DM_MTD=y CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_ATMEL=y -CONFIG_ATMEL_NAND_HW_PMECC=y -CONFIG_PMECC_CAP=8 +CONFIG_DM_NAND_ATMEL=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=50000000 diff --git a/configs/sam9x60ek_nandflash_defconfig b/configs/sam9x60ek_nandflash_defconfig index b04a153640..a9cbb6e953 100644 --- a/configs/sam9x60ek_nandflash_defconfig +++ b/configs/sam9x60ek_nandflash_defconfig @@ -54,6 +54,8 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_REDUNDAND_ENVIRONMENT=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_CLK=y CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y @@ -63,14 +65,15 @@ CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_AT91=y +CONFIG_ATMEL_EBI=y +CONFIG_MFD_ATMEL_SMC=y CONFIG_I2C_EEPROM=y CONFIG_MICROCHIP_FLEXCOM=y CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y +CONFIG_DM_MTD=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set -CONFIG_NAND_ATMEL=y -CONFIG_ATMEL_NAND_HW_PMECC=y -CONFIG_PMECC_CAP=8 +CONFIG_DM_NAND_ATMEL=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=50000000 diff --git a/configs/sam9x60ek_qspiflash_defconfig b/configs/sam9x60ek_qspiflash_defconfig index fd95a6fbbb..72f08f1375 100644 --- a/configs/sam9x60ek_qspiflash_defconfig +++ b/configs/sam9x60ek_qspiflash_defconfig @@ -54,6 +54,8 @@ CONFIG_OF_CONTROL=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y CONFIG_CLK=y CONFIG_CLK_CCF=y CONFIG_CLK_AT91=y @@ -63,6 +65,8 @@ CONFIG_CPU=y CONFIG_AT91_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_AT91=y +CONFIG_ATMEL_EBI=y +CONFIG_MFD_ATMEL_SMC=y CONFIG_I2C_EEPROM=y CONFIG_MICROCHIP_FLEXCOM=y CONFIG_GENERIC_ATMEL_MCI=y @@ -70,9 +74,7 @@ CONFIG_MTD=y CONFIG_DM_MTD=y CONFIG_MTD_RAW_NAND=y # CONFIG_SYS_NAND_USE_FLASH_BBT is not set -CONFIG_NAND_ATMEL=y -CONFIG_ATMEL_NAND_HW_PMECC=y -CONFIG_PMECC_CAP=8 +CONFIG_DM_NAND_ATMEL=y CONFIG_SYS_NAND_ONFI_DETECTION=y CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH_MACRONIX=y diff --git a/drivers/Kconfig b/drivers/Kconfig index 75ac149d31..9101e538b0 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -62,6 +62,8 @@ source "drivers/mailbox/Kconfig" source "drivers/memory/Kconfig" +source "drivers/mfd/Kconfig" + source "drivers/misc/Kconfig" source "drivers/mmc/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 6f1de58e00..83b14ef1fd 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -103,6 +103,7 @@ obj-$(CONFIG_QE) += qe/ obj-$(CONFIG_U_QE) += qe/ obj-y += mailbox/ obj-y += memory/ +obj-y += mfd/ obj-y += mtd/ obj-y += pwm/ obj-y += reset/ diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig index 56b89f17be..22cb9d637c 100644 --- a/drivers/memory/Kconfig +++ b/drivers/memory/Kconfig @@ -13,6 +13,13 @@ config MEMORY SRAM, Ethernet adapters, FPGAs, etc. For now this uclass has no methods yet. +config ATMEL_EBI + bool "Support for Atmel EBI" + help + Driver for Atmel EBI controller. This is a dummy + driver. Doesn't provide an access to EBI controller. Select + this option to enable the NAND flash controller driver + config SANDBOX_MEMORY bool "Enable Sandbox Memory Controller driver" depends on SANDBOX && MEMORY diff --git a/drivers/memory/Makefile b/drivers/memory/Makefile index 2b196d78c0..1cabf8ac9c 100644 --- a/drivers/memory/Makefile +++ b/drivers/memory/Makefile @@ -2,5 +2,6 @@ obj-$(CONFIG_MEMORY) += memory-uclass.o obj-$(CONFIG_SANDBOX_MEMORY) += memory-sandbox.o obj-$(CONFIG_STM32_FMC2_EBI) += stm32-fmc2-ebi.o +obj-$(CONFIG_ATMEL_EBI) += atmel_ebi.o obj-$(CONFIG_TI_AEMIF) += ti-aemif.o obj-$(CONFIG_TI_GPMC) += ti-gpmc.o diff --git a/drivers/memory/atmel_ebi.c b/drivers/memory/atmel_ebi.c new file mode 100644 index 0000000000..4739eef1b7 --- /dev/null +++ b/drivers/memory/atmel_ebi.c @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries + */ + +#include <dm/device.h> +#include <dm/read.h> +#include <dm/uclass.h> +#include <fdtdec.h> + +static int atmel_ebi_probe(struct udevice *dev) +{ + int ret; + struct udevice *ndev; + + ret = uclass_get_device_by_driver(UCLASS_MTD, + DM_DRIVER_GET(atmel_nand_controller), + &ndev); + if (ret) + printf("Failed to probe nand driver (err = %d)\n", ret); + + return ret; +} + +static const struct udevice_id atmel_ebi_match[] = { + {.compatible = "microchip,sam9x60-ebi"}, + {.compatible = "atmel,sama5d3-ebi"}, + { /* Sentinel */ } +}; + +U_BOOT_DRIVER(atmel_ebi) = { + .name = "atmel_ebi", + .id = UCLASS_NOP, + .of_match = atmel_ebi_match, + .probe = atmel_ebi_probe, + .bind = dm_scan_fdt_dev, +}; diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig new file mode 100644 index 0000000000..ae53b02f27 --- /dev/null +++ b/drivers/mfd/Kconfig @@ -0,0 +1,4 @@ +config MFD_ATMEL_SMC + bool "Atmel Static Memory Controller driver" + help + Say yes here to support Atmel Static Memory Controller driver. diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile new file mode 100644 index 0000000000..4454815a98 --- /dev/null +++ b/drivers/mfd/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c new file mode 100644 index 0000000000..15296f71a1 --- /dev/null +++ b/drivers/mfd/atmel-smc.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Atmel SMC (Static Memory Controller) helper functions. + * + * Copyright (C) 2022 Microchip Technology Inc. + * Copyright (C) 2017 Free Electrons + * + * Author: Boris Brezillon <boris.brezillon@free-electrons.com> + */ + +#include <clk.h> +#include <dm/device.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/mfd/syscon/atmel-smc.h> +#include <linux/string.h> + +/** + * atmel_smc_cs_conf_init - initialize a SMC CS conf + * @conf: the SMC CS conf to initialize + * + * Set all fields to 0 so that one can start defining a new config. + */ +void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf) +{ + memset(conf, 0, sizeof(*conf)); +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_init); + +/** + * atmel_smc_cs_encode_ncycles - encode a number of MCK clk cycles in the + * format expected by the SMC engine + * @ncycles: number of MCK clk cycles + * @msbpos: position of the MSB part of the timing field + * @msbwidth: width of the MSB part of the timing field + * @msbfactor: factor applied to the MSB + * @encodedval: param used to store the encoding result + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Setup/Pulse/Cycle/Timings Register"). This is a generic + * helper which called with different parameter depending on the encoding + * scheme. + * + * If the @ncycles value is too big to be encoded, -ERANGE is returned and + * the encodedval is contains the maximum val. Otherwise, 0 is returned. + */ +static int atmel_smc_cs_encode_ncycles(unsigned int ncycles, + unsigned int msbpos, + unsigned int msbwidth, + unsigned int msbfactor, + unsigned int *encodedval) +{ + unsigned int lsbmask = GENMASK(msbpos - 1, 0); + unsigned int msbmask = GENMASK(msbwidth - 1, 0); + unsigned int msb, lsb; + int ret = 0; + + msb = ncycles / msbfactor; + lsb = ncycles % msbfactor; + + if (lsb > lsbmask) { + lsb = 0; + msb++; + } + + /* + * Let's just put the maximum we can if the requested setting does + * not fit in the register field. + * We still return -ERANGE in case the caller cares. + */ + if (msb > msbmask) { + msb = msbmask; + lsb = lsbmask; + ret = -ERANGE; + } + + *encodedval = (msb << msbpos) | lsb; + + return ret; +} + +/** + * atmel_smc_cs_conf_set_timing - set the SMC CS conf Txx parameter to a + * specific value + * @conf: SMC CS conf descriptor + * @shift: the position of the Txx field in the TIMINGS register + * @ncycles: value (expressed in MCK clk cycles) to assign to this Txx + * parameter + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Timings Register"), and then stores the result in the + * @conf->timings field at @shift position. + * + * Returns -EINVAL if shift is invalid, -ERANGE if ncycles does not fit in + * the field, and 0 otherwise. + */ +int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles) +{ + unsigned int val; + int ret; + + if (shift != ATMEL_HSMC_TIMINGS_TCLR_SHIFT && + shift != ATMEL_HSMC_TIMINGS_TADL_SHIFT && + shift != ATMEL_HSMC_TIMINGS_TAR_SHIFT && + shift != ATMEL_HSMC_TIMINGS_TRR_SHIFT && + shift != ATMEL_HSMC_TIMINGS_TWB_SHIFT) + return -EINVAL; + + /* + * The formula described in atmel datasheets (section "HSMC Timings + * Register"): + * + * ncycles = (Txx[3] * 64) + Txx[2:0] + */ + ret = atmel_smc_cs_encode_ncycles(ncycles, 3, 1, 64, &val); + conf->timings &= ~GENMASK(shift + 3, shift); + conf->timings |= val << shift; + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_timing); + +/** + * atmel_smc_cs_conf_set_setup - set the SMC CS conf xx_SETUP parameter to a + * specific value + * @conf: SMC CS conf descriptor + * @shift: the position of the xx_SETUP field in the SETUP register + * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_SETUP + * parameter + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Setup Register"), and then stores the result in the + * @conf->setup field at @shift position. + * + * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in + * the field, and 0 otherwise. + */ +int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles) +{ + unsigned int val; + int ret; + + if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT && + shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT) + return -EINVAL; + + /* + * The formula described in atmel datasheets (section "SMC Setup + * Register"): + * + * ncycles = (128 * xx_SETUP[5]) + xx_SETUP[4:0] + */ + ret = atmel_smc_cs_encode_ncycles(ncycles, 5, 1, 128, &val); + conf->setup &= ~GENMASK(shift + 7, shift); + conf->setup |= val << shift; + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_setup); + +/** + * atmel_smc_cs_conf_set_pulse - set the SMC CS conf xx_PULSE parameter to a + * specific value + * @conf: SMC CS conf descriptor + * @shift: the position of the xx_PULSE field in the PULSE register + * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_PULSE + * parameter + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Pulse Register"), and then stores the result in the + * @conf->setup field at @shift position. + * + * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in + * the field, and 0 otherwise. + */ +int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles) +{ + unsigned int val; + int ret; + + if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT && + shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT) + return -EINVAL; + + /* + * The formula described in atmel datasheets (section "SMC Pulse + * Register"): + * + * ncycles = (256 * xx_PULSE[6]) + xx_PULSE[5:0] + */ + ret = atmel_smc_cs_encode_ncycles(ncycles, 6, 1, 256, &val); + conf->pulse &= ~GENMASK(shift + 7, shift); + conf->pulse |= val << shift; + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse); + +/** + * atmel_smc_cs_conf_set_cycle - set the SMC CS conf xx_CYCLE parameter to a + * specific value + * @conf: SMC CS conf descriptor + * @shift: the position of the xx_CYCLE field in the CYCLE register + * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_CYCLE + * parameter + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Cycle Register"), and then stores the result in the + * @conf->setup field at @shift position. + * + * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in + * the field, and 0 otherwise. + */ +int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles) +{ + unsigned int val; + int ret; + + if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NRD_SHIFT) + return -EINVAL; + + /* + * The formula described in atmel datasheets (section "SMC Cycle + * Register"): + * + * ncycles = (xx_CYCLE[8:7] * 256) + xx_CYCLE[6:0] + */ + ret = atmel_smc_cs_encode_ncycles(ncycles, 7, 2, 256, &val); + conf->cycle &= ~GENMASK(shift + 15, shift); + conf->cycle |= val << shift; + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle); + +/** + * atmel_smc_cs_conf_apply - apply an SMC CS conf + * @regmap: the SMC regmap + * @cs: the CS id + * @conf: the SMC CS conf to apply + * + * Applies an SMC CS configuration. + * Only valid on at91sam9/avr32 SoCs. + */ +void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs, + const struct atmel_smc_cs_conf *conf) +{ + regmap_write(regmap, ATMEL_SMC_SETUP(cs), conf->setup); + regmap_write(regmap, ATMEL_SMC_PULSE(cs), conf->pulse); + regmap_write(regmap, ATMEL_SMC_CYCLE(cs), conf->cycle); + regmap_write(regmap, ATMEL_SMC_MODE(cs), conf->mode); +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply); + +/** + * atmel_hsmc_cs_conf_apply - apply an SMC CS conf + * @regmap: the HSMC regmap + * @cs: the CS id + * @layout: the layout of registers + * @conf: the SMC CS conf to apply + * + * Applies an SMC CS configuration. + * Only valid on post-sama5 SoCs. + */ +void atmel_hsmc_cs_conf_apply(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *layout, + int cs, const struct atmel_smc_cs_conf *conf) +{ + regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup); + regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse); + regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle); + regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings); + regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode); +} +EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply); + +/** + * atmel_smc_cs_conf_get - retrieve the current SMC CS conf + * @regmap: the SMC regmap + * @cs: the CS id + * @conf: the SMC CS conf object to store the current conf + * + * Retrieve the SMC CS configuration. + * Only valid on at91sam9/avr32 SoCs. + */ +void atmel_smc_cs_conf_get(struct regmap *regmap, int cs, + struct atmel_smc_cs_conf *conf) +{ + regmap_read(regmap, ATMEL_SMC_SETUP(cs), &conf->setup); + regmap_read(regmap, ATMEL_SMC_PULSE(cs), &conf->pulse); + regmap_read(regmap, ATMEL_SMC_CYCLE(cs), &conf->cycle); + regmap_read(regmap, ATMEL_SMC_MODE(cs), &conf->mode); +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get); + +/** + * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf + * @regmap: the HSMC regmap + * @cs: the CS id + * @layout: the layout of registers + * @conf: the SMC CS conf object to store the current conf + * + * Retrieve the SMC CS configuration. + * Only valid on post-sama5 SoCs. + */ +void atmel_hsmc_cs_conf_get(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *layout, + int cs, struct atmel_smc_cs_conf *conf) +{ + regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup); + regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse); + regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle); + regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings); + regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode); +} +EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get); + +static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = { + .timing_regs_offset = 0x600, +}; + +static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = { + .timing_regs_offset = 0x700, +}; + +static const struct udevice_id atmel_smc_ids[] = { + { .compatible = "atmel,at91sam9260-smc", .data = (ulong)0 }, + { .compatible = "atmel,sama5d3-smc", .data = (ulong)&sama5d3_reg_layout }, + { .compatible = "atmel,sama5d2-smc", .data = (ulong)&sama5d2_reg_layout }, + { /* sentinel */ }, +}; + +/** + * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers + * @np: the HSMC regmap + * + * Retrieve the layout of HSMC registers. + * + * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer + * in HSMC case, otherwise ERR_PTR(-EINVAL). + */ +const struct atmel_hsmc_reg_layout * +atmel_hsmc_get_reg_layout(ofnode np) +{ + int i; + const struct udevice_id *match; + const char *name; + int len; + + name = ofnode_get_property(np, "compatible", &len); + + for (i = 0; i < ARRAY_SIZE(atmel_smc_ids); i++) { + if (!strcmp(name, atmel_smc_ids[i].compatible)) { + match = &atmel_smc_ids[i]; + break; + } + } + + return match ? (struct atmel_hsmc_reg_layout *)match->data : ERR_PTR(-EINVAL); +} diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index f8b79e5456..ab719a2ff1 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -45,6 +45,14 @@ config SYS_NAND_NO_SUBPAGE_WRITE bool "Disable subpage write support" depends on NAND_ARASAN || NAND_DAVINCI || NAND_KIRKWOOD +config DM_NAND_ATMEL + bool "Support Atmel NAND controller with DM support" + select SYS_NAND_SELF_INIT + imply SYS_NAND_USE_FLASH_BBT + help + Enable this driver for NAND flash platforms using an Atmel NAND + controller. + config NAND_ATMEL bool "Support Atmel NAND controller" select SYS_NAND_SELF_INIT diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile index a398aa9d88..42c1fb25b4 100644 --- a/drivers/mtd/nand/raw/Makefile +++ b/drivers/mtd/nand/raw/Makefile @@ -48,6 +48,7 @@ ifdef NORMAL_DRIVERS obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o +obj-$(CONFIG_DM_NAND_ATMEL) += atmel/ obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o obj-$(CONFIG_NAND_BRCMNAND) += brcmnand/ obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o diff --git a/drivers/mtd/nand/raw/atmel/Makefile b/drivers/mtd/nand/raw/atmel/Makefile new file mode 100644 index 0000000000..e044ff55ba --- /dev/null +++ b/drivers/mtd/nand/raw/atmel/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_DM_NAND_ATMEL) += atmel-nand-controller.o atmel-pmecc.o + +atmel-nand-controller-objs := nand-controller.o +atmel-pmecc-objs := pmecc.o diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c new file mode 100644 index 0000000000..9873d11254 --- /dev/null +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -0,0 +1,2286 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2022 ATMEL + * Copyright 2017 Free Electrons + * + * Author: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * Derived from the atmel_nand.c driver which contained the following + * copyrights: + * + * Copyright 2003 Rick Bronson + * + * Derived from drivers/mtd/nand/autcpu12.c (removed in v3.8) + * Copyright 2001 Thomas Gleixner (gleixner@autronix.de) + * + * Derived from drivers/mtd/spia.c (removed in v3.8) + * Copyright 2000 Steven J. Hill (sjhill@cotw.com) + * + * + * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263 + * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright 2007 + * + * Derived from Das U-Boot source code + * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c) + * Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * Add Programmable Multibit ECC support for various AT91 SoC + * Copyright 2012 ATMEL, Hong Xu + * + * Add Nand Flash Controller support for SAMA5 SoC + * Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com) + * + * Port from Linux + * Balamanikandan Gunasundar(balamanikandan.gunasundar@microchip.com) + * Copyright (C) 2022 Microchip Technology Inc. + * + * A few words about the naming convention in this file. This convention + * applies to structure and function names. + * + * Prefixes: + * + * - atmel_nand_: all generic structures/functions + * - atmel_smc_nand_: all structures/functions specific to the SMC interface + * (at91sam9 and avr32 SoCs) + * - atmel_hsmc_nand_: all structures/functions specific to the HSMC interface + * (sama5 SoCs and later) + * - atmel_nfc_: all structures/functions used to manipulate the NFC sub-block + * that is available in the HSMC block + * - <soc>_nand_: all SoC specific structures/functions + */ + +#include <asm-generic/gpio.h> +#include <clk.h> +#include <dm/device_compat.h> +#include <dm/devres.h> +#include <dm/of_addr.h> +#include <dm/of_access.h> +#include <dm/uclass.h> +#include <linux/completion.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/ioport.h> +#include <linux/mfd/syscon/atmel-matrix.h> +#include <linux/mfd/syscon/atmel-smc.h> +#include <linux/mtd/rawnand.h> +#include <linux/mtd/mtd.h> +#include <mach/at91_sfr.h> +#include <nand.h> +#include <regmap.h> +#include <syscon.h> + +#include "pmecc.h" + +#define NSEC_PER_SEC 1000000000L + +#define ATMEL_HSMC_NFC_CFG 0x0 +#define ATMEL_HSMC_NFC_CFG_SPARESIZE(x) (((x) / 4) << 24) +#define ATMEL_HSMC_NFC_CFG_SPARESIZE_MASK GENMASK(30, 24) +#define ATMEL_HSMC_NFC_CFG_DTO(cyc, mul) (((cyc) << 16) | ((mul) << 20)) +#define ATMEL_HSMC_NFC_CFG_DTO_MAX GENMASK(22, 16) +#define ATMEL_HSMC_NFC_CFG_RBEDGE BIT(13) +#define ATMEL_HSMC_NFC_CFG_FALLING_EDGE BIT(12) +#define ATMEL_HSMC_NFC_CFG_RSPARE BIT(9) +#define ATMEL_HSMC_NFC_CFG_WSPARE BIT(8) +#define ATMEL_HSMC_NFC_CFG_PAGESIZE_MASK GENMASK(2, 0) +#define ATMEL_HSMC_NFC_CFG_PAGESIZE(x) (fls((x) / 512) - 1) + +#define ATMEL_HSMC_NFC_CTRL 0x4 +#define ATMEL_HSMC_NFC_CTRL_EN BIT(0) +#define ATMEL_HSMC_NFC_CTRL_DIS BIT(1) + +#define ATMEL_HSMC_NFC_SR 0x8 +#define ATMEL_HSMC_NFC_IER 0xc +#define ATMEL_HSMC_NFC_IDR 0x10 +#define ATMEL_HSMC_NFC_IMR 0x14 +#define ATMEL_HSMC_NFC_SR_ENABLED BIT(1) +#define ATMEL_HSMC_NFC_SR_RB_RISE BIT(4) +#define ATMEL_HSMC_NFC_SR_RB_FALL BIT(5) +#define ATMEL_HSMC_NFC_SR_BUSY BIT(8) +#define ATMEL_HSMC_NFC_SR_WR BIT(11) +#define ATMEL_HSMC_NFC_SR_CSID GENMASK(14, 12) +#define ATMEL_HSMC_NFC_SR_XFRDONE BIT(16) +#define ATMEL_HSMC_NFC_SR_CMDDONE BIT(17) +#define ATMEL_HSMC_NFC_SR_DTOE BIT(20) +#define ATMEL_HSMC_NFC_SR_UNDEF BIT(21) +#define ATMEL_HSMC_NFC_SR_AWB BIT(22) +#define ATMEL_HSMC_NFC_SR_NFCASE BIT(23) +#define ATMEL_HSMC_NFC_SR_ERRORS (ATMEL_HSMC_NFC_SR_DTOE | \ + ATMEL_HSMC_NFC_SR_UNDEF | \ + ATMEL_HSMC_NFC_SR_AWB | \ + ATMEL_HSMC_NFC_SR_NFCASE) +#define ATMEL_HSMC_NFC_SR_RBEDGE(x) BIT((x) + 24) + +#define ATMEL_HSMC_NFC_ADDR 0x18 +#define ATMEL_HSMC_NFC_BANK 0x1c + +#define ATMEL_NFC_MAX_RB_ID 7 + +#define ATMEL_NFC_SRAM_SIZE 0x2400 + +#define ATMEL_NFC_CMD(pos, cmd) ((cmd) << (((pos) * 8) + 2)) +#define ATMEL_NFC_VCMD2 BIT(18) +#define ATMEL_NFC_ACYCLE(naddrs) ((naddrs) << 19) +#define ATMEL_NFC_CSID(cs) ((cs) << 22) +#define ATMEL_NFC_DATAEN BIT(25) +#define ATMEL_NFC_NFCWR BIT(26) + +#define ATMEL_NFC_MAX_ADDR_CYCLES 5 + +#define ATMEL_NAND_ALE_OFFSET BIT(21) +#define ATMEL_NAND_CLE_OFFSET BIT(22) + +#define DEFAULT_TIMEOUT_MS 1000 +#define MIN_DMA_LEN 128 + +static struct nand_ecclayout atmel_pmecc_oobinfo; + +struct nand_controller_ops { + int (*attach_chip)(struct nand_chip *chip); + int (*setup_data_interface)(struct mtd_info *mtd, int chipnr, + const struct nand_data_interface *conf); +}; + +struct nand_controller { + const struct nand_controller_ops *ops; +}; + +enum atmel_nand_rb_type { + ATMEL_NAND_NO_RB, + ATMEL_NAND_NATIVE_RB, + ATMEL_NAND_GPIO_RB, +}; + +struct atmel_nand_rb { + enum atmel_nand_rb_type type; + union { + struct gpio_desc gpio; + int id; + }; +}; + +struct atmel_nand_cs { + int id; + struct atmel_nand_rb rb; + struct gpio_desc csgpio; + struct { + void __iomem *virt; + dma_addr_t dma; + } io; + + struct atmel_smc_cs_conf smcconf; +}; + +struct atmel_nand { + struct list_head node; + struct udevice *dev; + struct nand_chip base; + struct atmel_nand_cs *activecs; + struct atmel_pmecc_user *pmecc; + struct gpio_desc cdgpio; + int numcs; + struct nand_controller *controller; + struct atmel_nand_cs cs[]; +}; + +static inline struct atmel_nand *to_atmel_nand(struct nand_chip *chip) +{ + return container_of(chip, struct atmel_nand, base); +} + +enum atmel_nfc_data_xfer { + ATMEL_NFC_NO_DATA, + ATMEL_NFC_READ_DATA, + ATMEL_NFC_WRITE_DATA, +}; + +struct atmel_nfc_op { + u8 cs; + u8 ncmds; + u8 cmds[2]; + u8 naddrs; + u8 addrs[5]; + enum atmel_nfc_data_xfer data; + u32 wait; + u32 errors; +}; + +struct atmel_nand_controller; +struct atmel_nand_controller_caps; + +struct atmel_nand_controller_ops { + int (*probe)(struct udevice *udev, + const struct atmel_nand_controller_caps *caps); + int (*remove)(struct atmel_nand_controller *nc); + void (*nand_init)(struct atmel_nand_controller *nc, + struct atmel_nand *nand); + int (*ecc_init)(struct nand_chip *chip); + int (*setup_data_interface)(struct atmel_nand *nand, int csline, + const struct nand_data_interface *conf); +}; + +struct atmel_nand_controller_caps { + bool has_dma; + bool legacy_of_bindings; + u32 ale_offs; + u32 cle_offs; + const char *ebi_csa_regmap_name; + const struct atmel_nand_controller_ops *ops; +}; + +struct atmel_nand_controller { + struct nand_controller base; + const struct atmel_nand_controller_caps *caps; + struct udevice *dev; + struct regmap *smc; + struct dma_chan *dmac; + struct atmel_pmecc *pmecc; + struct list_head chips; + struct clk *mck; +}; + +static inline struct atmel_nand_controller * +to_nand_controller(struct nand_controller *ctl) +{ + return container_of(ctl, struct atmel_nand_controller, base); +} + +struct atmel_smc_nand_ebi_csa_cfg { + u32 offs; + u32 nfd0_on_d16; +}; + +struct atmel_smc_nand_controller { + struct atmel_nand_controller base; + struct regmap *ebi_csa_regmap; + struct atmel_smc_nand_ebi_csa_cfg *ebi_csa; +}; + +static inline struct atmel_smc_nand_controller * +to_smc_nand_controller(struct nand_controller *ctl) +{ + return container_of(to_nand_controller(ctl), + struct atmel_smc_nand_controller, base); +} + +struct atmel_hsmc_nand_controller { + struct atmel_nand_controller base; + struct { + struct gen_pool *pool; + void __iomem *virt; + dma_addr_t dma; + } sram; + const struct atmel_hsmc_reg_layout *hsmc_layout; + struct regmap *io; + struct atmel_nfc_op op; + struct completion complete; + int irq; + + /* Only used when instantiating from legacy DT bindings. */ + struct clk *clk; +}; + +static inline struct atmel_hsmc_nand_controller * +to_hsmc_nand_controller(struct nand_controller *ctl) +{ + return container_of(to_nand_controller(ctl), + struct atmel_hsmc_nand_controller, base); +} + +static void pmecc_config_ecc_layout(struct nand_ecclayout *layout, + int oobsize, int ecc_len) +{ + int i; + + layout->eccbytes = ecc_len; + + /* ECC will occupy the last ecc_len bytes continuously */ + for (i = 0; i < ecc_len; i++) + layout->eccpos[i] = oobsize - ecc_len + i; + + layout->oobfree[0].offset = 2; + layout->oobfree[0].length = + oobsize - ecc_len - layout->oobfree[0].offset; +} + +static bool atmel_nfc_op_done(struct atmel_nfc_op *op, u32 status) +{ + op->errors |= status & ATMEL_HSMC_NFC_SR_ERRORS; + op->wait ^= status & op->wait; + + return !op->wait || op->errors; +} + +static int atmel_nfc_wait(struct atmel_hsmc_nand_controller *nc, bool poll, + unsigned int timeout_ms) +{ + int ret; + u32 status; + + if (!timeout_ms) + timeout_ms = DEFAULT_TIMEOUT_MS; + + if (poll) + ret = regmap_read_poll_timeout(nc->base.smc, + ATMEL_HSMC_NFC_SR, status, + atmel_nfc_op_done(&nc->op, + status), + 0, timeout_ms); + else + return -EOPNOTSUPP; + + if (nc->op.errors & ATMEL_HSMC_NFC_SR_DTOE) { + dev_err(nc->base.dev, "Waiting NAND R/B Timeout\n"); + ret = -ETIMEDOUT; + } + + if (nc->op.errors & ATMEL_HSMC_NFC_SR_UNDEF) { + dev_err(nc->base.dev, "Access to an undefined area\n"); + ret = -EIO; + } + + if (nc->op.errors & ATMEL_HSMC_NFC_SR_AWB) { + dev_err(nc->base.dev, "Access while busy\n"); + ret = -EIO; + } + + if (nc->op.errors & ATMEL_HSMC_NFC_SR_NFCASE) { + dev_err(nc->base.dev, "Wrong access size\n"); + ret = -EIO; + } + + return ret; +} + +static void iowrite8_rep(void *addr, const uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + writeb(buf[i], addr); +} + +static void ioread8_rep(void *addr, uint8_t *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + buf[i] = readb(addr); +} + +static void ioread16_rep(void *addr, void *buf, int len) +{ + int i; + u16 *p = (u16 *)buf; + + for (i = 0; i < len; i++) + p[i] = readw(addr); +} + +static void iowrite16_rep(void *addr, const void *buf, int len) +{ + int i; + u16 *p = (u16 *)buf; + + for (i = 0; i < len; i++) + writew(p[i], addr); +} + +static u8 atmel_nand_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + + return ioread8(nand->activecs->io.virt); +} + +static void atmel_nand_write_byte(struct mtd_info *mtd, u8 byte) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + + if (chip->options & NAND_BUSWIDTH_16) + iowrite16(byte | (byte << 8), nand->activecs->io.virt); + else + iowrite8(byte, nand->activecs->io.virt); +} + +static void atmel_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + + if (chip->options & NAND_BUSWIDTH_16) + ioread16_rep(nand->activecs->io.virt, buf, len / 2); + else + ioread8_rep(nand->activecs->io.virt, buf, len); +} + +static void atmel_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + + if (chip->options & NAND_BUSWIDTH_16) + iowrite16_rep(nand->activecs->io.virt, buf, len / 2); + else + iowrite8_rep(nand->activecs->io.virt, buf, len); +} + +static int atmel_nand_dev_ready(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + + return dm_gpio_get_value(&nand->activecs->rb.gpio); +} + +static void atmel_nand_select_chip(struct mtd_info *mtd, int cs) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + + if (cs < 0 || cs >= nand->numcs) { + nand->activecs = NULL; + chip->dev_ready = NULL; + return; + } + + nand->activecs = &nand->cs[cs]; + + if (nand->activecs->rb.type == ATMEL_NAND_GPIO_RB) + chip->dev_ready = atmel_nand_dev_ready; +} + +static int atmel_hsmc_nand_dev_ready(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_hsmc_nand_controller *nc; + u32 status; + + nc = to_hsmc_nand_controller(nand->controller); + + regmap_read(nc->base.smc, ATMEL_HSMC_NFC_SR, &status); + + return status & ATMEL_HSMC_NFC_SR_RBEDGE(nand->activecs->rb.id); +} + +static void atmel_hsmc_nand_select_chip(struct mtd_info *mtd, int cs) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_hsmc_nand_controller *nc; + + nc = to_hsmc_nand_controller(nand->controller); + + atmel_nand_select_chip(mtd, cs); + + if (!nand->activecs) { + regmap_write(nc->base.smc, ATMEL_HSMC_NFC_CTRL, + ATMEL_HSMC_NFC_CTRL_DIS); + return; + } + + if (nand->activecs->rb.type == ATMEL_NAND_NATIVE_RB) + chip->dev_ready = atmel_hsmc_nand_dev_ready; + + regmap_update_bits(nc->base.smc, ATMEL_HSMC_NFC_CFG, + ATMEL_HSMC_NFC_CFG_PAGESIZE_MASK | + ATMEL_HSMC_NFC_CFG_SPARESIZE_MASK | + ATMEL_HSMC_NFC_CFG_RSPARE | + ATMEL_HSMC_NFC_CFG_WSPARE, + ATMEL_HSMC_NFC_CFG_PAGESIZE(mtd->writesize) | + ATMEL_HSMC_NFC_CFG_SPARESIZE(mtd->oobsize) | + ATMEL_HSMC_NFC_CFG_RSPARE); + regmap_write(nc->base.smc, ATMEL_HSMC_NFC_CTRL, + ATMEL_HSMC_NFC_CTRL_EN); +} + +static int atmel_nfc_exec_op(struct atmel_hsmc_nand_controller *nc, bool poll) +{ + u8 *addrs = nc->op.addrs; + unsigned int op = 0; + u32 addr, val; + int i, ret; + + nc->op.wait = ATMEL_HSMC_NFC_SR_CMDDONE; + + for (i = 0; i < nc->op.ncmds; i++) + op |= ATMEL_NFC_CMD(i, nc->op.cmds[i]); + + if (nc->op.naddrs == ATMEL_NFC_MAX_ADDR_CYCLES) + regmap_write(nc->base.smc, ATMEL_HSMC_NFC_ADDR, *addrs++); + + op |= ATMEL_NFC_CSID(nc->op.cs) | + ATMEL_NFC_ACYCLE(nc->op.naddrs); + + if (nc->op.ncmds > 1) + op |= ATMEL_NFC_VCMD2; + + addr = addrs[0] | (addrs[1] << 8) | (addrs[2] << 16) | + (addrs[3] << 24); + + if (nc->op.data != ATMEL_NFC_NO_DATA) { + op |= ATMEL_NFC_DATAEN; + nc->op.wait |= ATMEL_HSMC_NFC_SR_XFRDONE; + + if (nc->op.data == ATMEL_NFC_WRITE_DATA) + op |= ATMEL_NFC_NFCWR; + } + + /* Clear all flags. */ + regmap_read(nc->base.smc, ATMEL_HSMC_NFC_SR, &val); + + /* Send the command. */ + regmap_write(nc->io, op, addr); + + ret = atmel_nfc_wait(nc, poll, 0); + if (ret) + dev_err(nc->base.dev, + "Failed to send NAND command (err = %d)!", + ret); + + /* Reset the op state. */ + memset(&nc->op, 0, sizeof(nc->op)); + + return ret; +} + +static void atmel_hsmc_nand_cmd_ctrl(struct mtd_info *mtd, int dat, + unsigned int ctrl) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_hsmc_nand_controller *nc; + + nc = to_hsmc_nand_controller(nand->controller); + + if (ctrl & NAND_ALE) { + if (nc->op.naddrs == ATMEL_NFC_MAX_ADDR_CYCLES) + return; + + nc->op.addrs[nc->op.naddrs++] = dat; + } else if (ctrl & NAND_CLE) { + if (nc->op.ncmds > 1) + return; + + nc->op.cmds[nc->op.ncmds++] = dat; + } + + if (dat == NAND_CMD_NONE) { + nc->op.cs = nand->activecs->id; + atmel_nfc_exec_op(nc, true); + } +} + +static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_nand_controller *nc; + + nc = to_nand_controller(nand->controller); + + if ((ctrl & NAND_CTRL_CHANGE) && + dm_gpio_is_valid(&nand->activecs->csgpio)) { + if (ctrl & NAND_NCE) + dm_gpio_set_value(&nand->activecs->csgpio, 0); + else + dm_gpio_set_value(&nand->activecs->csgpio, 1); + } + + if (ctrl & NAND_ALE) + writeb(cmd, nand->activecs->io.virt + nc->caps->ale_offs); + else if (ctrl & NAND_CLE) + writeb(cmd, nand->activecs->io.virt + nc->caps->cle_offs); +} + +static void atmel_nfc_copy_to_sram(struct nand_chip *chip, const u8 *buf, + bool oob_required) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_hsmc_nand_controller *nc; + int ret = -EIO; + + nc = to_hsmc_nand_controller(nand->controller); + + if (ret) + memcpy_toio(nc->sram.virt, buf, mtd->writesize); + + if (oob_required) + memcpy_toio(nc->sram.virt + mtd->writesize, chip->oob_poi, + mtd->oobsize); +} + +static void atmel_nfc_copy_from_sram(struct nand_chip *chip, u8 *buf, + bool oob_required) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_hsmc_nand_controller *nc; + int ret = -EIO; + + nc = to_hsmc_nand_controller(nand->controller); + + if (ret) + memcpy_fromio(buf, nc->sram.virt, mtd->writesize); + + if (oob_required) + memcpy_fromio(chip->oob_poi, nc->sram.virt + mtd->writesize, + mtd->oobsize); +} + +static void atmel_nfc_set_op_addr(struct nand_chip *chip, int page, int column) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_hsmc_nand_controller *nc; + + nc = to_hsmc_nand_controller(nand->controller); + + if (column >= 0) { + nc->op.addrs[nc->op.naddrs++] = column; + + /* + * 2 address cycles for the column offset on large page NANDs. + */ + if (mtd->writesize > 512) + nc->op.addrs[nc->op.naddrs++] = column >> 8; + } + + if (page >= 0) { + nc->op.addrs[nc->op.naddrs++] = page; + nc->op.addrs[nc->op.naddrs++] = page >> 8; + + if (chip->options & NAND_ROW_ADDR_3) + nc->op.addrs[nc->op.naddrs++] = page >> 16; + } +} + +static int atmel_nand_pmecc_enable(struct nand_chip *chip, int op, bool raw) +{ + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_nand_controller *nc; + int ret; + + nc = to_nand_controller(nand->controller); + + if (raw) + return 0; + + ret = atmel_pmecc_enable(nand->pmecc, op); + if (ret) + dev_err(nc->dev, + "Failed to enable ECC engine (err = %d)\n", ret); + + return ret; +} + +static void atmel_nand_pmecc_disable(struct nand_chip *chip, bool raw) +{ + struct atmel_nand *nand = to_atmel_nand(chip); + + if (!raw) + atmel_pmecc_disable(nand->pmecc); +} + +static int atmel_nand_pmecc_generate_eccbytes(struct nand_chip *chip, bool raw) +{ + struct atmel_nand *nand = to_atmel_nand(chip); + struct mtd_info *mtd = nand_to_mtd(chip); + struct atmel_nand_controller *nc; + struct mtd_oob_region oobregion; + void *eccbuf; + int ret, i; + + nc = to_nand_controller(nand->controller); + + if (raw) + return 0; + + ret = atmel_pmecc_wait_rdy(nand->pmecc); + if (ret) { + dev_err(nc->dev, + "Failed to transfer NAND page data (err = %d)\n", + ret); + return ret; + } + + mtd_ooblayout_ecc(mtd, 0, &oobregion); + eccbuf = chip->oob_poi + oobregion.offset; + + for (i = 0; i < chip->ecc.steps; i++) { + atmel_pmecc_get_generated_eccbytes(nand->pmecc, i, + eccbuf); + eccbuf += chip->ecc.bytes; + } + + return 0; +} + +static int atmel_nand_pmecc_correct_data(struct nand_chip *chip, void *buf, + bool raw) +{ + struct atmel_nand *nand = to_atmel_nand(chip); + struct mtd_info *mtd = nand_to_mtd(chip); + struct atmel_nand_controller *nc; + struct mtd_oob_region oobregion; + int ret, i, max_bitflips = 0; + void *databuf, *eccbuf; + + nc = to_nand_controller(nand->controller); + + if (raw) + return 0; + + ret = atmel_pmecc_wait_rdy(nand->pmecc); + if (ret) { + dev_err(nc->dev, + "Failed to read NAND page data (err = %d)\n", ret); + return ret; + } + + mtd_ooblayout_ecc(mtd, 0, &oobregion); + eccbuf = chip->oob_poi + oobregion.offset; + databuf = buf; + + for (i = 0; i < chip->ecc.steps; i++) { + ret = atmel_pmecc_correct_sector(nand->pmecc, i, databuf, + eccbuf); + if (ret < 0 && !atmel_pmecc_correct_erased_chunks(nand->pmecc)) + ret = nand_check_erased_ecc_chunk(databuf, + chip->ecc.size, + eccbuf, + chip->ecc.bytes, + NULL, 0, + chip->ecc.strength); + + if (ret >= 0) + max_bitflips = max(ret, max_bitflips); + else + mtd->ecc_stats.failed++; + + databuf += chip->ecc.size; + eccbuf += chip->ecc.bytes; + } + + return max_bitflips; +} + +static int atmel_nand_pmecc_write_pg(struct nand_chip *chip, const u8 *buf, + bool oob_required, int page, bool raw) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct atmel_nand *nand = to_atmel_nand(chip); + int ret; + + nand_prog_page_begin_op(chip, page, 0, NULL, 0); + + ret = atmel_nand_pmecc_enable(chip, NAND_ECC_WRITE, raw); + if (ret) + return ret; + + atmel_nand_write_buf(mtd, buf, mtd->writesize); + + ret = atmel_nand_pmecc_generate_eccbytes(chip, raw); + if (ret) { + atmel_pmecc_disable(nand->pmecc); + return ret; + } + + atmel_nand_pmecc_disable(chip, raw); + + atmel_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return nand_prog_page_end_op(chip); +} + +static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, + struct nand_chip *chip, const u8 *buf, + int oob_required, int page) +{ + return atmel_nand_pmecc_write_pg(chip, buf, oob_required, page, false); +} + +static int atmel_nand_pmecc_write_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, + const u8 *buf, int oob_required, + int page) +{ + return atmel_nand_pmecc_write_pg(chip, buf, oob_required, page, true); +} + +static int atmel_nand_pmecc_read_pg(struct nand_chip *chip, u8 *buf, + bool oob_required, int page, bool raw) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + int ret; + + nand_read_page_op(chip, page, 0, NULL, 0); + + ret = atmel_nand_pmecc_enable(chip, NAND_ECC_READ, raw); + if (ret) + return ret; + + atmel_nand_read_buf(mtd, buf, mtd->writesize); + atmel_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize); + + ret = atmel_nand_pmecc_correct_data(chip, buf, raw); + + atmel_nand_pmecc_disable(chip, raw); + + return ret; +} + +static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, + struct nand_chip *chip, u8 *buf, + int oob_required, int page) +{ + return atmel_nand_pmecc_read_pg(chip, buf, oob_required, page, false); +} + +static int atmel_nand_pmecc_read_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, u8 *buf, + int oob_required, int page) +{ + return atmel_nand_pmecc_read_pg(chip, buf, oob_required, page, true); +} + +static int atmel_hsmc_nand_pmecc_write_pg(struct nand_chip *chip, + const u8 *buf, bool oob_required, + int page, bool raw) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_hsmc_nand_controller *nc; + int ret, status; + + nc = to_hsmc_nand_controller(nand->controller); + + atmel_nfc_copy_to_sram(chip, buf, false); + + nc->op.cmds[0] = NAND_CMD_SEQIN; + nc->op.ncmds = 1; + atmel_nfc_set_op_addr(chip, page, 0x0); + nc->op.cs = nand->activecs->id; + nc->op.data = ATMEL_NFC_WRITE_DATA; + + ret = atmel_nand_pmecc_enable(chip, NAND_ECC_WRITE, raw); + if (ret) + return ret; + + ret = atmel_nfc_exec_op(nc, true); + if (ret) { + atmel_nand_pmecc_disable(chip, raw); + dev_err(nc->base.dev, + "Failed to transfer NAND page data (err = %d)\n", + ret); + return ret; + } + + ret = atmel_nand_pmecc_generate_eccbytes(chip, raw); + + atmel_nand_pmecc_disable(chip, raw); + + if (ret) + return ret; + + atmel_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + nc->op.cmds[0] = NAND_CMD_PAGEPROG; + nc->op.ncmds = 1; + nc->op.cs = nand->activecs->id; + ret = atmel_nfc_exec_op(nc, true); + if (ret) + dev_err(nc->base.dev, "Failed to program NAND page (err = %d)\n", + ret); + + status = chip->waitfunc(mtd, chip); + if (status & NAND_STATUS_FAIL) + return -EIO; + + return ret; +} + +static int +atmel_hsmc_nand_pmecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const u8 *buf, int oob_required, + int page) +{ + return atmel_hsmc_nand_pmecc_write_pg(chip, buf, oob_required, page, + false); +} + +static int +atmel_hsmc_nand_pmecc_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const u8 *buf, + int oob_required, int page) +{ + return atmel_hsmc_nand_pmecc_write_pg(chip, buf, oob_required, page, + true); +} + +static int atmel_hsmc_nand_pmecc_read_pg(struct nand_chip *chip, u8 *buf, + bool oob_required, int page, + bool raw) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_hsmc_nand_controller *nc; + int ret; + + nc = to_hsmc_nand_controller(nand->controller); + + /* + * Optimized read page accessors only work when the NAND R/B pin is + * connected to a native SoC R/B pin. If that's not the case, fallback + * to the non-optimized one. + */ + if (nand->activecs->rb.type != ATMEL_NAND_NATIVE_RB) { + nand_read_page_op(chip, page, 0, NULL, 0); + + return atmel_nand_pmecc_read_pg(chip, buf, oob_required, page, + raw); + } + + nc->op.cmds[nc->op.ncmds++] = NAND_CMD_READ0; + + if (mtd->writesize > 512) + nc->op.cmds[nc->op.ncmds++] = NAND_CMD_READSTART; + + atmel_nfc_set_op_addr(chip, page, 0x0); + nc->op.cs = nand->activecs->id; + nc->op.data = ATMEL_NFC_READ_DATA; + + ret = atmel_nand_pmecc_enable(chip, NAND_ECC_READ, raw); + if (ret) + return ret; + + ret = atmel_nfc_exec_op(nc, true); + if (ret) { + atmel_nand_pmecc_disable(chip, raw); + dev_err(nc->base.dev, + "Failed to load NAND page data (err = %d)\n", + ret); + return ret; + } + + atmel_nfc_copy_from_sram(chip, buf, true); + + ret = atmel_nand_pmecc_correct_data(chip, buf, raw); + + atmel_nand_pmecc_disable(chip, raw); + + return ret; +} + +static int atmel_hsmc_nand_pmecc_read_page(struct mtd_info *mtd, + struct nand_chip *chip, u8 *buf, + int oob_required, int page) +{ + return atmel_hsmc_nand_pmecc_read_pg(chip, buf, oob_required, page, + false); +} + +static int atmel_hsmc_nand_pmecc_read_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, + u8 *buf, int oob_required, + int page) +{ + return atmel_hsmc_nand_pmecc_read_pg(chip, buf, oob_required, page, + true); +} + +static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (section || !ecc->total) + return -ERANGE; + + oobregion->length = ecc->total; + oobregion->offset = mtd->oobsize - oobregion->length; + + return 0; +} + +static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct nand_ecc_ctrl *ecc = &chip->ecc; + + if (section) + return -ERANGE; + + oobregion->length = mtd->oobsize - ecc->total - 2; + oobregion->offset = 2; + + return 0; +} + +static const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = { + .ecc = nand_ooblayout_ecc_lp, + .rfree = nand_ooblayout_free_lp, +}; + +const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void) +{ + return &nand_ooblayout_lp_ops; +} + +static int atmel_nand_pmecc_init(struct nand_chip *chip) +{ + struct mtd_info *mtd = nand_to_mtd(chip); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_nand_controller *nc; + struct atmel_pmecc_user_req req; + + nc = to_nand_controller(nand->controller); + + if (!nc->pmecc) { + dev_err(nc->dev, "HW ECC not supported\n"); + return -EOPNOTSUPP; + } + + if (nc->caps->legacy_of_bindings) { + u32 val; + + if (!ofnode_read_u32(nc->dev->node_, "atmel,pmecc-cap", &val)) + chip->ecc.strength = val; + + if (!ofnode_read_u32(nc->dev->node_, + "atmel,pmecc-sector-size", + &val)) + chip->ecc.size = val; + } + + if (chip->ecc.options & NAND_ECC_MAXIMIZE) + req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH; + else if (chip->ecc.strength) + req.ecc.strength = chip->ecc.strength; + else + req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH; + + if (chip->ecc.size) + req.ecc.sectorsize = chip->ecc.size; + else + req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO; + + req.pagesize = mtd->writesize; + req.oobsize = mtd->oobsize; + + if (mtd->writesize <= 512) { + req.ecc.bytes = 4; + req.ecc.ooboffset = 0; + } else { + req.ecc.bytes = mtd->oobsize - 2; + req.ecc.ooboffset = ATMEL_PMECC_OOBOFFSET_AUTO; + } + + nand->pmecc = atmel_pmecc_create_user(nc->pmecc, &req); + if (IS_ERR(nand->pmecc)) + return PTR_ERR(nand->pmecc); + + chip->ecc.algo = NAND_ECC_BCH; + chip->ecc.size = req.ecc.sectorsize; + chip->ecc.bytes = req.ecc.bytes / req.ecc.nsectors; + chip->ecc.strength = req.ecc.strength; + + chip->options |= NAND_NO_SUBPAGE_WRITE; + + mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout()); + pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, + mtd->oobsize, + chip->ecc.bytes); + chip->ecc.layout = &atmel_pmecc_oobinfo; + + return 0; +} + +static int atmel_nand_ecc_init(struct nand_chip *chip) +{ + struct atmel_nand_controller *nc; + struct atmel_nand *nand = to_atmel_nand(chip); + int ret; + + nc = to_nand_controller(nand->controller); + + switch (chip->ecc.mode) { + case NAND_ECC_NONE: + case NAND_ECC_SOFT: + /* + * Nothing to do, the core will initialize everything for us. + */ + break; + + case NAND_ECC_HW: + ret = atmel_nand_pmecc_init(chip); + if (ret) + return ret; + + chip->ecc.read_page = atmel_nand_pmecc_read_page; + chip->ecc.write_page = atmel_nand_pmecc_write_page; + chip->ecc.read_page_raw = atmel_nand_pmecc_read_page_raw; + chip->ecc.write_page_raw = atmel_nand_pmecc_write_page_raw; + break; + + default: + /* Other modes are not supported. */ + dev_err(nc->dev, "Unsupported ECC mode: %d\n", + chip->ecc.mode); + return -EOPNOTSUPP; + } + + return 0; +} + +static int atmel_hsmc_nand_ecc_init(struct nand_chip *chip) +{ + int ret; + + ret = atmel_nand_ecc_init(chip); + if (ret) + return ret; + + if (chip->ecc.mode != NAND_ECC_HW) + return 0; + + /* Adjust the ECC operations for the HSMC IP. */ + chip->ecc.read_page = atmel_hsmc_nand_pmecc_read_page; + chip->ecc.write_page = atmel_hsmc_nand_pmecc_write_page; + chip->ecc.read_page_raw = atmel_hsmc_nand_pmecc_read_page_raw; + chip->ecc.write_page_raw = atmel_hsmc_nand_pmecc_write_page_raw; + + return 0; +} + +static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand, + const struct nand_data_interface *conf, + struct atmel_smc_cs_conf *smcconf) +{ + u32 ncycles, totalcycles, timeps, mckperiodps; + struct atmel_nand_controller *nc; + int ret; + + nc = to_nand_controller(nand->controller); + + /* DDR interface not supported. */ + if (conf->type != NAND_SDR_IFACE) + return -EOPNOTSUPP; + + /* + * tRC < 30ns implies EDO mode. This controller does not support this + * mode. + */ + if (conf->timings.sdr.tRC_min < 30000) + return -EOPNOTSUPP; + + atmel_smc_cs_conf_init(smcconf); + + mckperiodps = NSEC_PER_SEC / clk_get_rate(nc->mck); + mckperiodps *= 1000; + + /* + * Set write pulse timing. This one is easy to extract: + * + * NWE_PULSE = tWP + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tWP_min, mckperiodps); + totalcycles = ncycles; + ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NWE_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * The write setup timing depends on the operation done on the NAND. + * All operations goes through the same data bus, but the operation + * type depends on the address we are writing to (ALE/CLE address + * lines). + * Since we have no way to differentiate the different operations at + * the SMC level, we must consider the worst case (the biggest setup + * time among all operation types): + * + * NWE_SETUP = max(tCLS, tCS, tALS, tDS) - NWE_PULSE + */ + timeps = max3(conf->timings.sdr.tCLS_min, conf->timings.sdr.tCS_min, + conf->timings.sdr.tALS_min); + timeps = max(timeps, conf->timings.sdr.tDS_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + ncycles = ncycles > totalcycles ? ncycles - totalcycles : 0; + totalcycles += ncycles; + ret = atmel_smc_cs_conf_set_setup(smcconf, ATMEL_SMC_NWE_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * As for the write setup timing, the write hold timing depends on the + * operation done on the NAND: + * + * NWE_HOLD = max(tCLH, tCH, tALH, tDH, tWH) + */ + timeps = max3(conf->timings.sdr.tCLH_min, conf->timings.sdr.tCH_min, + conf->timings.sdr.tALH_min); + timeps = max3(timeps, conf->timings.sdr.tDH_min, + conf->timings.sdr.tWH_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + totalcycles += ncycles; + + /* + * The write cycle timing is directly matching tWC, but is also + * dependent on the other timings on the setup and hold timings we + * calculated earlier, which gives: + * + * NWE_CYCLE = max(tWC, NWE_SETUP + NWE_PULSE + NWE_HOLD) + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tWC_min, mckperiodps); + ncycles = max(totalcycles, ncycles); + ret = atmel_smc_cs_conf_set_cycle(smcconf, ATMEL_SMC_NWE_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * We don't want the CS line to be toggled between each byte/word + * transfer to the NAND. The only way to guarantee that is to have the + * NCS_{WR,RD}_{SETUP,HOLD} timings set to 0, which in turn means: + * + * NCS_WR_PULSE = NWE_CYCLE + */ + ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NCS_WR_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * As for the write setup timing, the read hold timing depends on the + * operation done on the NAND: + * + * NRD_HOLD = max(tREH, tRHOH) + */ + timeps = max(conf->timings.sdr.tREH_min, conf->timings.sdr.tRHOH_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + totalcycles = ncycles; + + /* + * TDF = tRHZ - NRD_HOLD + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tRHZ_max, mckperiodps); + ncycles -= totalcycles; + + /* + * In ONFI 4.0 specs, tRHZ has been increased to support EDO NANDs and + * we might end up with a config that does not fit in the TDF field. + * Just take the max value in this case and hope that the NAND is more + * tolerant than advertised. + */ + if (ncycles > ATMEL_SMC_MODE_TDF_MAX) + ncycles = ATMEL_SMC_MODE_TDF_MAX; + else if (ncycles < ATMEL_SMC_MODE_TDF_MIN) + ncycles = ATMEL_SMC_MODE_TDF_MIN; + + smcconf->mode |= ATMEL_SMC_MODE_TDF(ncycles) | + ATMEL_SMC_MODE_TDFMODE_OPTIMIZED; + + /* + * Read pulse timing directly matches tRP: + * + * NRD_PULSE = tRP + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tRP_min, mckperiodps); + totalcycles += ncycles; + ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NRD_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * The write cycle timing is directly matching tWC, but is also + * dependent on the setup and hold timings we calculated earlier, + * which gives: + * + * NRD_CYCLE = max(tRC, NRD_PULSE + NRD_HOLD) + * + * NRD_SETUP is always 0. + */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tRC_min, mckperiodps); + ncycles = max(totalcycles, ncycles); + ret = atmel_smc_cs_conf_set_cycle(smcconf, ATMEL_SMC_NRD_SHIFT, + ncycles); + if (ret) + return ret; + + /* + * We don't want the CS line to be toggled between each byte/word + * transfer from the NAND. The only way to guarantee that is to have + * the NCS_{WR,RD}_{SETUP,HOLD} timings set to 0, which in turn means: + * + * NCS_RD_PULSE = NRD_CYCLE + */ + ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NCS_RD_SHIFT, + ncycles); + if (ret) + return ret; + + /* Txxx timings are directly matching tXXX ones. */ + ncycles = DIV_ROUND_UP(conf->timings.sdr.tCLR_min, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TCLR_SHIFT, + ncycles); + if (ret) + return ret; + + ncycles = DIV_ROUND_UP(conf->timings.sdr.tADL_min, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TADL_SHIFT, + ncycles); + /* + * Version 4 of the ONFI spec mandates that tADL be at least 400 + * nanoseconds, but, depending on the master clock rate, 400 ns may not + * fit in the tADL field of the SMC reg. We need to relax the check and + * accept the -ERANGE return code. + * + * Note that previous versions of the ONFI spec had a lower tADL_min + * (100 or 200 ns). It's not clear why this timing constraint got + * increased but it seems most NANDs are fine with values lower than + * 400ns, so we should be safe. + */ + if (ret && ret != -ERANGE) + return ret; + + ncycles = DIV_ROUND_UP(conf->timings.sdr.tAR_min, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TAR_SHIFT, + ncycles); + if (ret) + return ret; + + ncycles = DIV_ROUND_UP(conf->timings.sdr.tRR_min, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TRR_SHIFT, + ncycles); + if (ret) + return ret; + + ncycles = DIV_ROUND_UP(conf->timings.sdr.tWB_max, mckperiodps); + ret = atmel_smc_cs_conf_set_timing(smcconf, + ATMEL_HSMC_TIMINGS_TWB_SHIFT, + ncycles); + if (ret) + return ret; + + /* Attach the CS line to the NFC logic. */ + smcconf->timings |= ATMEL_HSMC_TIMINGS_NFSEL; + + /* Set the appropriate data bus width. */ + if (nand->base.options & NAND_BUSWIDTH_16) + smcconf->mode |= ATMEL_SMC_MODE_DBW_16; + + /* Operate in NRD/NWE READ/WRITEMODE. */ + smcconf->mode |= ATMEL_SMC_MODE_READMODE_NRD | + ATMEL_SMC_MODE_WRITEMODE_NWE; + + return 0; +} + +static int +atmel_smc_nand_setup_data_interface(struct atmel_nand *nand, + int csline, + const struct nand_data_interface *conf) +{ + struct atmel_nand_controller *nc; + struct atmel_smc_cs_conf smcconf; + struct atmel_nand_cs *cs; + int ret; + + nc = to_nand_controller(nand->controller); + + ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf); + if (ret) + return ret; + + if (csline == NAND_DATA_IFACE_CHECK_ONLY) + return 0; + + cs = &nand->cs[csline]; + cs->smcconf = smcconf; + + atmel_smc_cs_conf_apply(nc->smc, cs->id, &cs->smcconf); + + return 0; +} + +static int +atmel_hsmc_nand_setup_data_interface(struct atmel_nand *nand, + int csline, + const struct nand_data_interface *conf) +{ + struct atmel_hsmc_nand_controller *nc; + struct atmel_smc_cs_conf smcconf; + struct atmel_nand_cs *cs; + int ret; + + nc = to_hsmc_nand_controller(nand->controller); + + ret = atmel_smc_nand_prepare_smcconf(nand, conf, &smcconf); + if (ret) + return ret; + + if (csline == NAND_DATA_IFACE_CHECK_ONLY) + return 0; + + cs = &nand->cs[csline]; + cs->smcconf = smcconf; + + if (cs->rb.type == ATMEL_NAND_NATIVE_RB) + cs->smcconf.timings |= ATMEL_HSMC_TIMINGS_RBNSEL(cs->rb.id); + + atmel_hsmc_cs_conf_apply(nc->base.smc, nc->hsmc_layout, cs->id, + &cs->smcconf); + + return 0; +} + +static int atmel_nand_setup_data_interface(struct mtd_info *mtd, int csline, + const struct nand_data_interface *conf) +{ + struct nand_chip *chip = mtd_to_nand(mtd); + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_nand_controller *nc; + + nc = to_nand_controller(nand->controller); + + if (csline >= nand->numcs || + (csline < 0 && csline != NAND_DATA_IFACE_CHECK_ONLY)) + return -EINVAL; + + return nc->caps->ops->setup_data_interface(nand, csline, conf); +} + +#define NAND_KEEP_TIMINGS 0x00800000 + +static void atmel_nand_init(struct atmel_nand_controller *nc, + struct atmel_nand *nand) +{ + struct nand_chip *chip = &nand->base; + struct mtd_info *mtd = nand_to_mtd(chip); + + mtd->dev->parent = nc->dev; + nand->controller = &nc->base; + nand->controller = &nc->base; + + chip->cmd_ctrl = atmel_nand_cmd_ctrl; + chip->read_byte = atmel_nand_read_byte; + chip->write_byte = atmel_nand_write_byte; + chip->read_buf = atmel_nand_read_buf; + chip->write_buf = atmel_nand_write_buf; + chip->select_chip = atmel_nand_select_chip; + chip->setup_data_interface = atmel_nand_setup_data_interface; + + if (!nc->mck || !nc->caps->ops->setup_data_interface) + chip->options |= NAND_KEEP_TIMINGS; + + /* Some NANDs require a longer delay than the default one (20us). */ + chip->chip_delay = 40; + + /* Default to HW ECC if pmecc is available. */ + if (nc->pmecc) + chip->ecc.mode = NAND_ECC_HW; +} + +static void atmel_smc_nand_init(struct atmel_nand_controller *nc, + struct atmel_nand *nand) +{ + struct atmel_smc_nand_controller *smc_nc; + int i; + + atmel_nand_init(nc, nand); + + smc_nc = to_smc_nand_controller(nand->controller); + if (!smc_nc->ebi_csa_regmap) + return; + + /* Attach the CS to the NAND Flash logic. */ + for (i = 0; i < nand->numcs; i++) + regmap_update_bits(smc_nc->ebi_csa_regmap, + smc_nc->ebi_csa->offs, + BIT(nand->cs[i].id), BIT(nand->cs[i].id)); + + if (smc_nc->ebi_csa->nfd0_on_d16) + regmap_update_bits(smc_nc->ebi_csa_regmap, + smc_nc->ebi_csa->offs, + smc_nc->ebi_csa->nfd0_on_d16, + smc_nc->ebi_csa->nfd0_on_d16); +} + +static void atmel_hsmc_nand_init(struct atmel_nand_controller *nc, + struct atmel_nand *nand) +{ + struct nand_chip *chip = &nand->base; + + atmel_nand_init(nc, nand); + + /* Overload some methods for the HSMC controller. */ + chip->cmd_ctrl = atmel_hsmc_nand_cmd_ctrl; + chip->select_chip = atmel_hsmc_nand_select_chip; +} + +static int atmel_nand_controller_remove_nand(struct atmel_nand *nand) +{ + list_del(&nand->node); + + return 0; +} + +static struct atmel_nand *atmel_nand_create(struct atmel_nand_controller *nc, + ofnode np, + int reg_cells) +{ + struct atmel_nand *nand; + ofnode n; + int numcs = 0; + int ret, i; + u32 val; + fdt32_t faddr; + phys_addr_t base; + + /* Count num of nand nodes */ + ofnode_for_each_subnode(n, ofnode_get_parent(np)) + numcs++; + if (numcs < 1) { + dev_err(nc->dev, "Missing or invalid reg property\n"); + return ERR_PTR(-EINVAL); + } + + nand = devm_kzalloc(nc->dev, + sizeof(struct atmel_nand) + + (numcs * sizeof(struct atmel_nand_cs)), + GFP_KERNEL); + if (!nand) { + dev_err(nc->dev, "Failed to allocate NAND object\n"); + return ERR_PTR(-ENOMEM); + } + + nand->numcs = numcs; + + gpio_request_by_name_nodev(np, "det-gpios", 0, &nand->cdgpio, + GPIOD_IS_IN); + + for (i = 0; i < numcs; i++) { + ret = ofnode_read_u32(np, "reg", &val); + if (ret) { + dev_err(nc->dev, "Invalid reg property (err = %d)\n", + ret); + return ERR_PTR(ret); + } + nand->cs[i].id = val; + + /* Read base address */ + struct resource res; + + if (ofnode_read_resource(np, 0, &res)) { + dev_err(nc->dev, "Unable to read resource\n"); + return ERR_PTR(-ENOMEM); + } + + faddr = cpu_to_fdt32(val); + base = ofnode_translate_address(np, &faddr); + nand->cs[i].io.virt = (void *)base; + + if (!ofnode_read_u32(np, "atmel,rb", &val)) { + if (val > ATMEL_NFC_MAX_RB_ID) + return ERR_PTR(-EINVAL); + + nand->cs[i].rb.type = ATMEL_NAND_NATIVE_RB; + nand->cs[i].rb.id = val; + } else { + gpio_request_by_name_nodev(np, "rb-gpios", 0, + &nand->cs[i].rb.gpio, + GPIOD_IS_IN); + nand->cs[i].rb.type = ATMEL_NAND_GPIO_RB; + } + + gpio_request_by_name_nodev(np, "cs-gpios", 0, + &nand->cs[i].csgpio, + GPIOD_IS_OUT); + } + + nand_set_flash_node(&nand->base, np); + + return nand; +} + +static int nand_attach(struct nand_chip *chip) +{ + struct atmel_nand *nand = to_atmel_nand(chip); + + if (nand->controller->ops && nand->controller->ops->attach_chip) + return nand->controller->ops->attach_chip(chip); + + return 0; +} + +int atmel_nand_scan(struct mtd_info *mtd, int maxchips) +{ + int ret; + + ret = nand_scan_ident(mtd, maxchips, NULL); + if (ret) + return ret; + + ret = nand_attach(mtd_to_nand(mtd)); + if (ret) + return ret; + + ret = nand_scan_tail(mtd); + return ret; +} + +static int +atmel_nand_controller_add_nand(struct atmel_nand_controller *nc, + struct atmel_nand *nand) +{ + struct nand_chip *chip = &nand->base; + struct mtd_info *mtd = nand_to_mtd(chip); + int ret; + + /* No card inserted, skip this NAND. */ + if (dm_gpio_is_valid(&nand->cdgpio) && + dm_gpio_get_value(&nand->cdgpio)) { + dev_info(nc->dev, "No SmartMedia card inserted.\n"); + return 0; + } + + nc->caps->ops->nand_init(nc, nand); + + ret = atmel_nand_scan(mtd, nand->numcs); + if (ret) { + dev_err(nc->dev, "NAND scan failed: %d\n", ret); + return ret; + } + + ret = nand_register(0, mtd); + if (ret) { + dev_err(nc->dev, "nand register failed: %d\n", ret); + return ret; + } + + list_add_tail(&nand->node, &nc->chips); + + return 0; +} + +static int +atmel_nand_controller_remove_nands(struct atmel_nand_controller *nc) +{ + struct atmel_nand *nand, *tmp; + int ret; + + list_for_each_entry_safe(nand, tmp, &nc->chips, node) { + ret = atmel_nand_controller_remove_nand(nand); + if (ret) + return ret; + } + + return 0; +} + +static int atmel_nand_controller_add_nands(struct atmel_nand_controller *nc) +{ + ofnode np; + ofnode nand_np; + int ret, reg_cells; + u32 val; + + /* TODO: + * Add support for legacy nands + */ + + np = nc->dev->node_; + + ret = ofnode_read_u32(np, "#address-cells", &val); + if (ret) { + dev_err(nc->dev, "missing #address-cells property\n"); + return ret; + } + + reg_cells = val; + + ret = ofnode_read_u32(np, "#size-cells", &val); + if (ret) { + dev_err(nc->dev, "missing #size-cells property\n"); + return ret; + } + + reg_cells += val; + + ofnode_for_each_subnode(nand_np, np) { + struct atmel_nand *nand; + + nand = atmel_nand_create(nc, nand_np, reg_cells); + if (IS_ERR(nand)) { + ret = PTR_ERR(nand); + goto err; + } + + ret = atmel_nand_controller_add_nand(nc, nand); + if (ret) + goto err; + } + + return 0; + +err: + atmel_nand_controller_remove_nands(nc); + + return ret; +} + +static const struct atmel_smc_nand_ebi_csa_cfg at91sam9260_ebi_csa = { + .offs = AT91SAM9260_MATRIX_EBICSA, +}; + +static const struct atmel_smc_nand_ebi_csa_cfg at91sam9261_ebi_csa = { + .offs = AT91SAM9261_MATRIX_EBICSA, +}; + +static const struct atmel_smc_nand_ebi_csa_cfg at91sam9263_ebi_csa = { + .offs = AT91SAM9263_MATRIX_EBI0CSA, +}; + +static const struct atmel_smc_nand_ebi_csa_cfg at91sam9rl_ebi_csa = { + .offs = AT91SAM9RL_MATRIX_EBICSA, +}; + +static const struct atmel_smc_nand_ebi_csa_cfg at91sam9g45_ebi_csa = { + .offs = AT91SAM9G45_MATRIX_EBICSA, +}; + +static const struct atmel_smc_nand_ebi_csa_cfg at91sam9n12_ebi_csa = { + .offs = AT91SAM9N12_MATRIX_EBICSA, +}; + +static const struct atmel_smc_nand_ebi_csa_cfg at91sam9x5_ebi_csa = { + .offs = AT91SAM9X5_MATRIX_EBICSA, +}; + +static const struct atmel_smc_nand_ebi_csa_cfg sam9x60_ebi_csa = { + .offs = AT91_SFR_CCFG_EBICSA, + .nfd0_on_d16 = AT91_SFR_CCFG_NFD0_ON_D16, +}; + +static const struct udevice_id atmel_ebi_csa_regmap_of_ids[] = { + { + .compatible = "atmel,at91sam9260-matrix", + .data = (ulong)&at91sam9260_ebi_csa, + }, + { + .compatible = "atmel,at91sam9261-matrix", + .data = (ulong)&at91sam9261_ebi_csa, + }, + { + .compatible = "atmel,at91sam9263-matrix", + .data = (ulong)&at91sam9263_ebi_csa, + }, + { + .compatible = "atmel,at91sam9rl-matrix", + .data = (ulong)&at91sam9rl_ebi_csa, + }, + { + .compatible = "atmel,at91sam9g45-matrix", + .data = (ulong)&at91sam9g45_ebi_csa, + }, + { + .compatible = "atmel,at91sam9n12-matrix", + .data = (ulong)&at91sam9n12_ebi_csa, + }, + { + .compatible = "atmel,at91sam9x5-matrix", + .data = (ulong)&at91sam9x5_ebi_csa, + }, + { + .compatible = "microchip,sam9x60-sfr", + .data = (ulong)&sam9x60_ebi_csa, + }, + { /* sentinel */ }, +}; + +static int atmel_nand_attach_chip(struct nand_chip *chip) +{ + struct atmel_nand *nand = to_atmel_nand(chip); + struct atmel_nand_controller *nc = to_nand_controller(nand->controller); + struct mtd_info *mtd = nand_to_mtd(chip); + int ret; + + ret = nc->caps->ops->ecc_init(chip); + if (ret) + return ret; + + if (nc->caps->legacy_of_bindings || !ofnode_valid(nc->dev->node_)) { + /* + * We keep the MTD name unchanged to avoid breaking platforms + * where the MTD cmdline parser is used and the bootloader + * has not been updated to use the new naming scheme. + */ + mtd->name = "atmel_nand"; + } else if (!mtd->name) { + /* + * If the new bindings are used and the bootloader has not been + * updated to pass a new mtdparts parameter on the cmdline, you + * should define the following property in your nand node: + * + * label = "atmel_nand"; + * + * This way, mtd->name will be set by the core when + * nand_set_flash_node() is called. + */ + sprintf(mtd->name, "%s:nand.%d", nc->dev->name, nand->cs[0].id); + } + + return 0; +} + +static const struct nand_controller_ops atmel_nand_controller_ops = { + .attach_chip = atmel_nand_attach_chip, +}; + +static int +atmel_nand_controller_init(struct atmel_nand_controller *nc, + struct udevice *dev, + const struct atmel_nand_controller_caps *caps) +{ + struct ofnode_phandle_args args; + int ret; + + nc->base.ops = &atmel_nand_controller_ops; + INIT_LIST_HEAD(&nc->chips); + nc->dev = dev; + nc->caps = caps; + + nc->pmecc = devm_atmel_pmecc_get(dev); + if (IS_ERR(nc->pmecc)) { + ret = PTR_ERR(nc->pmecc); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Could not get PMECC object (err = %d)\n", + ret); + return ret; + } + + /* We do not retrieve the SMC syscon when parsing old DTs. */ + if (nc->caps->legacy_of_bindings) + return 0; + + nc->mck = devm_kzalloc(dev, sizeof(nc->mck), GFP_KERNEL); + if (!nc->mck) + return -ENOMEM; + + clk_get_by_index(dev->parent, 0, nc->mck); + if (IS_ERR(nc->mck)) { + dev_err(dev, "Failed to retrieve MCK clk\n"); + return PTR_ERR(nc->mck); + } + + ret = ofnode_parse_phandle_with_args(dev->parent->node_, + "atmel,smc", NULL, 0, 0, &args); + if (ret) { + dev_err(dev, "Missing or invalid atmel,smc property\n"); + return -EINVAL; + } + + nc->smc = syscon_node_to_regmap(args.node); + if (IS_ERR(nc->smc)) { + ret = PTR_ERR(nc->smc); + dev_err(dev, "Could not get SMC regmap (err = %d)\n", ret); + return 0; + } + + return 0; +} + +static int +atmel_smc_nand_controller_init(struct atmel_smc_nand_controller *nc) +{ + struct udevice *dev = nc->base.dev; + struct ofnode_phandle_args args; + const struct udevice_id *match = NULL; + const char *name; + int ret; + int len; + int i; + + /* We do not retrieve the EBICSA regmap when parsing old DTs. */ + if (nc->base.caps->legacy_of_bindings) + return 0; + + ret = ofnode_parse_phandle_with_args(dev->parent->node_, + nc->base.caps->ebi_csa_regmap_name, + NULL, 0, 0, &args); + if (ret) { + dev_err(dev, "Unable to read ebi csa regmap\n"); + return -EINVAL; + } + + name = ofnode_get_property(args.node, "compatible", &len); + + for (i = 0; i < ARRAY_SIZE(atmel_ebi_csa_regmap_of_ids); i++) { + if (!strcmp(name, atmel_ebi_csa_regmap_of_ids[i].compatible)) { + match = &atmel_ebi_csa_regmap_of_ids[i]; + break; + } + } + + if (!match) { + dev_err(dev, "Unable to find ebi csa conf"); + return -EINVAL; + } + nc->ebi_csa = (struct atmel_smc_nand_ebi_csa_cfg *)match->data; + + nc->ebi_csa_regmap = syscon_node_to_regmap(args.node); + if (IS_ERR(nc->ebi_csa_regmap)) { + ret = PTR_ERR(nc->ebi_csa_regmap); + dev_err(dev, "Could not get EBICSA regmap (err = %d)\n", ret); + return ret; + } + + /* TODO: + * The at91sam9263 has 2 EBIs, if the NAND controller is under EBI1 + * add 4 to ->ebi_csa->offs. + */ + + return 0; +} + +static int atmel_hsmc_nand_controller_init(struct atmel_hsmc_nand_controller *nc) +{ + struct udevice *dev = nc->base.dev; + struct ofnode_phandle_args args; + struct clk smc_clk; + int ret; + u32 addr; + + ret = ofnode_parse_phandle_with_args(dev->parent->node_, + "atmel,smc", NULL, 0, 0, &args); + if (ret) { + dev_err(dev, "Missing or invalid atmel,smc property\n"); + return -EINVAL; + } + + nc->hsmc_layout = atmel_hsmc_get_reg_layout(args.node); + if (IS_ERR(nc->hsmc_layout)) { + dev_err(dev, "Could not get hsmc layout\n"); + return -EINVAL; + } + + /* Enable smc clock */ + ret = clk_get_by_index_nodev(args.node, 0, &smc_clk); + if (ret) { + dev_err(dev, "Unable to get smc clock (err = %d)", ret); + return ret; + } + + ret = clk_prepare_enable(&smc_clk); + if (ret) + return ret; + + ret = ofnode_parse_phandle_with_args(dev->node_, + "atmel,nfc-io", NULL, 0, 0, &args); + if (ret) { + dev_err(dev, "Missing or invalid atmel,nfc-io property\n"); + return -EINVAL; + } + + nc->io = syscon_node_to_regmap(args.node); + if (IS_ERR(nc->io)) { + ret = PTR_ERR(nc->io); + dev_err(dev, "Could not get NFC IO regmap\n"); + return ret; + } + + ret = ofnode_parse_phandle_with_args(dev->node_, + "atmel,nfc-sram", NULL, 0, 0, &args); + if (ret) { + dev_err(dev, "Missing or invalid atmel,nfc-sram property\n"); + return ret; + } + + ret = ofnode_read_u32(args.node, "reg", &addr); + if (ret) { + dev_err(dev, "Could not read reg addr of nfc sram"); + return ret; + } + nc->sram.virt = (void *)addr; + + return 0; +} + +static int +atmel_hsmc_nand_controller_remove(struct atmel_nand_controller *nc) +{ + struct atmel_hsmc_nand_controller *hsmc_nc; + int ret; + + ret = atmel_nand_controller_remove_nands(nc); + if (ret) + return ret; + + hsmc_nc = container_of(nc, struct atmel_hsmc_nand_controller, base); + + if (hsmc_nc->clk) { + clk_disable_unprepare(hsmc_nc->clk); + devm_clk_put(nc->dev, hsmc_nc->clk); + } + + return 0; +} + +static int +atmel_hsmc_nand_controller_probe(struct udevice *dev, + const struct atmel_nand_controller_caps *caps) +{ + struct atmel_hsmc_nand_controller *nc; + int ret; + + nc = devm_kzalloc(dev, sizeof(*nc), GFP_KERNEL); + if (!nc) + return -ENOMEM; + + ret = atmel_nand_controller_init(&nc->base, dev, caps); + if (ret) + return ret; + + ret = atmel_hsmc_nand_controller_init(nc); + if (ret) + return ret; + + /* Make sure all irqs are masked before registering our IRQ handler. */ + regmap_write(nc->base.smc, ATMEL_HSMC_NFC_IDR, 0xffffffff); + + /* Initial NFC configuration. */ + regmap_write(nc->base.smc, ATMEL_HSMC_NFC_CFG, + ATMEL_HSMC_NFC_CFG_DTO_MAX); + + ret = atmel_nand_controller_add_nands(&nc->base); + if (ret) + goto err; + + return 0; + +err: + atmel_hsmc_nand_controller_remove(&nc->base); + + return ret; +} + +static const struct atmel_nand_controller_ops atmel_hsmc_nc_ops = { + .probe = atmel_hsmc_nand_controller_probe, + .remove = atmel_hsmc_nand_controller_remove, + .ecc_init = atmel_hsmc_nand_ecc_init, + .nand_init = atmel_hsmc_nand_init, + .setup_data_interface = atmel_hsmc_nand_setup_data_interface, +}; + +static const struct atmel_nand_controller_caps atmel_sama5_nc_caps = { + .has_dma = true, + .ale_offs = BIT(21), + .cle_offs = BIT(22), + .ops = &atmel_hsmc_nc_ops, +}; + +static int +atmel_smc_nand_controller_probe(struct udevice *dev, + const struct atmel_nand_controller_caps *caps) +{ + struct atmel_smc_nand_controller *nc; + int ret; + + nc = devm_kzalloc(dev, sizeof(*nc), GFP_KERNEL); + if (!nc) + return -ENOMEM; + + ret = atmel_nand_controller_init(&nc->base, dev, caps); + if (ret) + return ret; + + ret = atmel_smc_nand_controller_init(nc); + if (ret) + return ret; + + return atmel_nand_controller_add_nands(&nc->base); +} + +static int +atmel_smc_nand_controller_remove(struct atmel_nand_controller *nc) +{ + int ret; + + ret = atmel_nand_controller_remove_nands(nc); + if (ret) + return ret; + + return 0; +} + +/* + * The SMC reg layout of at91rm9200 is completely different which prevents us + * from re-using atmel_smc_nand_setup_data_interface() for the + * ->setup_data_interface() hook. + * At this point, there's no support for the at91rm9200 SMC IP, so we leave + * ->setup_data_interface() unassigned. + */ +static const struct atmel_nand_controller_ops at91rm9200_nc_ops = { + .probe = atmel_smc_nand_controller_probe, + .remove = atmel_smc_nand_controller_remove, + .ecc_init = atmel_nand_ecc_init, + .nand_init = atmel_smc_nand_init, +}; + +static const struct atmel_nand_controller_caps atmel_rm9200_nc_caps = { + .ale_offs = BIT(21), + .cle_offs = BIT(22), + .ebi_csa_regmap_name = "atmel,matrix", + .ops = &at91rm9200_nc_ops, +}; + +static const struct atmel_nand_controller_ops atmel_smc_nc_ops = { + .probe = atmel_smc_nand_controller_probe, + .remove = atmel_smc_nand_controller_remove, + .ecc_init = atmel_nand_ecc_init, + .nand_init = atmel_smc_nand_init, + .setup_data_interface = atmel_smc_nand_setup_data_interface, +}; + +static const struct atmel_nand_controller_caps atmel_sam9260_nc_caps = { + .ale_offs = BIT(21), + .cle_offs = BIT(22), + .ebi_csa_regmap_name = "atmel,matrix", + .ops = &atmel_smc_nc_ops, +}; + +static const struct atmel_nand_controller_caps atmel_sam9261_nc_caps = { + .ale_offs = BIT(22), + .cle_offs = BIT(21), + .ebi_csa_regmap_name = "atmel,matrix", + .ops = &atmel_smc_nc_ops, +}; + +static const struct atmel_nand_controller_caps atmel_sam9g45_nc_caps = { + .has_dma = true, + .ale_offs = BIT(21), + .cle_offs = BIT(22), + .ebi_csa_regmap_name = "atmel,matrix", + .ops = &atmel_smc_nc_ops, +}; + +static const struct atmel_nand_controller_caps microchip_sam9x60_nc_caps = { + .has_dma = true, + .ale_offs = BIT(21), + .cle_offs = BIT(22), + .ebi_csa_regmap_name = "microchip,sfr", + .ops = &atmel_smc_nc_ops, +}; + +/* Only used to parse old bindings. */ +static const struct atmel_nand_controller_caps atmel_rm9200_nand_caps = { + .ale_offs = BIT(21), + .cle_offs = BIT(22), + .ops = &atmel_smc_nc_ops, + .legacy_of_bindings = true, +}; + +static const struct udevice_id atmel_nand_controller_of_ids[] = { + { + .compatible = "atmel,at91rm9200-nand-controller", + .data = (ulong)&atmel_rm9200_nc_caps, + }, + { + .compatible = "atmel,at91sam9260-nand-controller", + .data = (ulong)&atmel_sam9260_nc_caps, + }, + { + .compatible = "atmel,at91sam9261-nand-controller", + .data = (ulong)&atmel_sam9261_nc_caps, + }, + { + .compatible = "atmel,at91sam9g45-nand-controller", + .data = (ulong)&atmel_sam9g45_nc_caps, + }, + { + .compatible = "atmel,sama5d3-nand-controller", + .data = (ulong)&atmel_sama5_nc_caps, + }, + { + .compatible = "microchip,sam9x60-nand-controller", + .data = (ulong)µchip_sam9x60_nc_caps, + }, + /* Support for old/deprecated bindings: */ + { + .compatible = "atmel,at91rm9200-nand", + .data = (ulong)&atmel_rm9200_nand_caps, + }, + { + .compatible = "atmel,sama5d4-nand", + .data = (ulong)&atmel_rm9200_nand_caps, + }, + { + .compatible = "atmel,sama5d2-nand", + .data = (ulong)&atmel_rm9200_nand_caps, + }, + { /* sentinel */ }, +}; + +static int atmel_nand_controller_probe(struct udevice *dev) +{ + const struct atmel_nand_controller_caps *caps; + struct udevice *pmecc_dev; + + caps = (struct atmel_nand_controller_caps *)dev_get_driver_data(dev); + if (!caps) { + printf("Could not retrieve NFC caps\n"); + return -EINVAL; + } + + /* Probe pmecc driver */ + if (uclass_get_device(UCLASS_MTD, 1, &pmecc_dev)) { + printf("%s: get device fail\n", __func__); + return -EINVAL; + } + + return caps->ops->probe(dev, caps); +} + +static int atmel_nand_controller_remove(struct udevice *dev) +{ + struct atmel_nand_controller *nc; + + nc = (struct atmel_nand_controller *)dev_get_driver_data(dev); + + return nc->caps->ops->remove(nc); +} + +U_BOOT_DRIVER(atmel_nand_controller) = { + .name = "atmel-nand-controller", + .id = UCLASS_MTD, + .of_match = atmel_nand_controller_of_ids, + .probe = atmel_nand_controller_probe, + .remove = atmel_nand_controller_remove, +}; + +void board_nand_init(void) +{ + struct udevice *dev; + int ret; + + ret = uclass_get_device_by_driver(UCLASS_MTD, + DM_DRIVER_GET(atmel_nand_controller), + &dev); + if (ret && ret != -ENODEV) + printf("Failed to initialize NAND controller. (error %d)\n", + ret); +} diff --git a/drivers/mtd/nand/raw/atmel/pmecc.c b/drivers/mtd/nand/raw/atmel/pmecc.c new file mode 100644 index 0000000000..e2e3f1ee6b --- /dev/null +++ b/drivers/mtd/nand/raw/atmel/pmecc.c @@ -0,0 +1,965 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2017 ATMEL + * Copyright 2017 Free Electrons + * + * Author: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * Derived from the atmel_nand.c driver which contained the following + * copyrights: + * + * Copyright 2003 Rick Bronson + * + * Derived from drivers/mtd/nand/autcpu12.c (removed in v3.8) + * Copyright 2001 Thomas Gleixner (gleixner@autronix.de) + * + * Derived from drivers/mtd/spia.c (removed in v3.8) + * Copyright 2000 Steven J. Hill (sjhill@cotw.com) + * + * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263 + * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright 2007 + * + * Derived from Das U-Boot source code + * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c) + * Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * Add Programmable Multibit ECC support for various AT91 SoC + * Copyright 2012 ATMEL, Hong Xu + * + * Add Nand Flash Controller support for SAMA5 SoC + * Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com) + * + * The PMECC is an hardware assisted BCH engine, which means part of the + * ECC algorithm is left to the software. The hardware/software repartition + * is explained in the "PMECC Controller Functional Description" chapter in + * Atmel datasheets, and some of the functions in this file are directly + * implementing the algorithms described in the "Software Implementation" + * sub-section. + * + * TODO: it seems that the software BCH implementation in lib/bch.c is already + * providing some of the logic we are implementing here. It would be smart + * to expose the needed lib/bch.c helpers/functions and re-use them here. + */ +#include <linux/iopoll.h> +#include <linux/mtd/rawnand.h> +#include <dm/of_access.h> +#include <dm/ofnode.h> +#include <asm/io.h> +#include "pmecc.h" +#include <dm/uclass.h> +#include <dm/device_compat.h> +#include <dm/devres.h> +#include <linux/ioport.h> + +/* Galois field dimension */ +#define PMECC_GF_DIMENSION_13 13 +#define PMECC_GF_DIMENSION_14 14 + +/* Primitive Polynomial used by PMECC */ +#define PMECC_GF_13_PRIMITIVE_POLY 0x201b +#define PMECC_GF_14_PRIMITIVE_POLY 0x4443 + +#define PMECC_LOOKUP_TABLE_SIZE_512 0x2000 +#define PMECC_LOOKUP_TABLE_SIZE_1024 0x4000 + +/* Time out value for reading PMECC status register */ +#define PMECC_MAX_TIMEOUT_MS 100 + +/* PMECC Register Definitions */ +#define ATMEL_PMECC_CFG 0x0 +#define PMECC_CFG_BCH_STRENGTH(x) (x) +#define PMECC_CFG_BCH_STRENGTH_MASK GENMASK(2, 0) +#define PMECC_CFG_SECTOR512 (0 << 4) +#define PMECC_CFG_SECTOR1024 BIT(4) +#define PMECC_CFG_NSECTORS(x) ((fls(x) - 1) << 8) +#define PMECC_CFG_READ_OP (0 << 12) +#define PMECC_CFG_WRITE_OP BIT(12) +#define PMECC_CFG_SPARE_ENABLE BIT(16) +#define PMECC_CFG_AUTO_ENABLE BIT(20) + +#define ATMEL_PMECC_SAREA 0x4 +#define ATMEL_PMECC_SADDR 0x8 +#define ATMEL_PMECC_EADDR 0xc + +#define ATMEL_PMECC_CLK 0x10 +#define PMECC_CLK_133MHZ (2 << 0) + +#define ATMEL_PMECC_CTRL 0x14 +#define PMECC_CTRL_RST BIT(0) +#define PMECC_CTRL_DATA BIT(1) +#define PMECC_CTRL_USER BIT(2) +#define PMECC_CTRL_ENABLE BIT(4) +#define PMECC_CTRL_DISABLE BIT(5) + +#define ATMEL_PMECC_SR 0x18 +#define PMECC_SR_BUSY BIT(0) +#define PMECC_SR_ENABLE BIT(4) + +#define ATMEL_PMECC_IER 0x1c +#define ATMEL_PMECC_IDR 0x20 +#define ATMEL_PMECC_IMR 0x24 +#define ATMEL_PMECC_ISR 0x28 +#define PMECC_ERROR_INT BIT(0) + +#define ATMEL_PMECC_ECC(sector, n) \ + ((((sector) + 1) * 0x40) + (n)) + +#define ATMEL_PMECC_REM(sector, n) \ + ((((sector) + 1) * 0x40) + ((n) * 4) + 0x200) + +/* PMERRLOC Register Definitions */ +#define ATMEL_PMERRLOC_ELCFG 0x0 +#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0) +#define PMERRLOC_ELCFG_SECTOR_1024 BIT(0) +#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16) + +#define ATMEL_PMERRLOC_ELPRIM 0x4 +#define ATMEL_PMERRLOC_ELEN 0x8 +#define ATMEL_PMERRLOC_ELDIS 0xc +#define PMERRLOC_DISABLE BIT(0) + +#define ATMEL_PMERRLOC_ELSR 0x10 +#define PMERRLOC_ELSR_BUSY BIT(0) + +#define ATMEL_PMERRLOC_ELIER 0x14 +#define ATMEL_PMERRLOC_ELIDR 0x18 +#define ATMEL_PMERRLOC_ELIMR 0x1c +#define ATMEL_PMERRLOC_ELISR 0x20 +#define PMERRLOC_ERR_NUM_MASK GENMASK(12, 8) +#define PMERRLOC_CALC_DONE BIT(0) + +#define ATMEL_PMERRLOC_SIGMA(x) (((x) * 0x4) + 0x28) + +#define ATMEL_PMERRLOC_EL(offs, x) (((x) * 0x4) + (offs)) + +struct atmel_pmecc_gf_tables { + u16 *alpha_to; + u16 *index_of; +}; + +struct atmel_pmecc_caps { + const int *strengths; + int nstrengths; + int el_offset; + bool correct_erased_chunks; +}; + +struct atmel_pmecc_user_conf_cache { + u32 cfg; + u32 sarea; + u32 saddr; + u32 eaddr; +}; + +struct atmel_pmecc_user { + struct atmel_pmecc_user_conf_cache cache; + struct atmel_pmecc *pmecc; + const struct atmel_pmecc_gf_tables *gf_tables; + int eccbytes; + s16 *partial_syn; + s16 *si; + s16 *lmu; + s16 *smu; + s32 *mu; + s32 *dmu; + s32 *delta; + u32 isr; +}; + +/* Serialize table access */ +DEFINE_MUTEX(pmecc_gf_tables_lock); +static const struct atmel_pmecc_gf_tables *pmecc_gf_tables_512; +static const struct atmel_pmecc_gf_tables *pmecc_gf_tables_1024; + +static inline int deg(unsigned int poly) +{ + /* polynomial degree is the most-significant bit index */ + return fls(poly) - 1; +} + +static int atmel_pmecc_build_gf_tables(int mm, unsigned int poly, + struct atmel_pmecc_gf_tables *gf_tables) +{ + unsigned int i, x = 1; + const unsigned int k = BIT(deg(poly)); + unsigned int nn = BIT(mm) - 1; + + /* primitive polynomial must be of degree m */ + if (k != (1u << mm)) + return -EINVAL; + + for (i = 0; i < nn; i++) { + gf_tables->alpha_to[i] = x; + gf_tables->index_of[x] = i; + if (i && (x == 1)) + /* polynomial is not primitive (a^i=1 with 0<i<2^m-1) */ + return -EINVAL; + x <<= 1; + if (x & k) + x ^= poly; + } + gf_tables->alpha_to[nn] = 1; + gf_tables->index_of[0] = 0; + + return 0; +} + +static const struct atmel_pmecc_gf_tables * +atmel_pmecc_create_gf_tables(const struct atmel_pmecc_user_req *req) +{ + struct atmel_pmecc_gf_tables *gf_tables; + unsigned int poly, degree, table_size; + int ret; + + if (req->ecc.sectorsize == 512) { + degree = PMECC_GF_DIMENSION_13; + poly = PMECC_GF_13_PRIMITIVE_POLY; + table_size = PMECC_LOOKUP_TABLE_SIZE_512; + } else { + degree = PMECC_GF_DIMENSION_14; + poly = PMECC_GF_14_PRIMITIVE_POLY; + table_size = PMECC_LOOKUP_TABLE_SIZE_1024; + } + + gf_tables = kzalloc(sizeof(*gf_tables) + + (2 * table_size * sizeof(u16)), + GFP_KERNEL); + if (!gf_tables) + return ERR_PTR(-ENOMEM); + + gf_tables->alpha_to = (void *)(gf_tables + 1); + gf_tables->index_of = gf_tables->alpha_to + table_size; + + ret = atmel_pmecc_build_gf_tables(degree, poly, gf_tables); + if (ret) { + kfree(gf_tables); + return ERR_PTR(ret); + } + + return gf_tables; +} + +static const struct atmel_pmecc_gf_tables * +atmel_pmecc_get_gf_tables(const struct atmel_pmecc_user_req *req) +{ + const struct atmel_pmecc_gf_tables **gf_tables, *ret; + + mutex_lock(&pmecc_gf_tables_lock); + if (req->ecc.sectorsize == 512) + gf_tables = &pmecc_gf_tables_512; + else + gf_tables = &pmecc_gf_tables_1024; + + ret = *gf_tables; + + if (!ret) { + ret = atmel_pmecc_create_gf_tables(req); + if (!IS_ERR(ret)) + *gf_tables = ret; + } + mutex_unlock(&pmecc_gf_tables_lock); + + return ret; +} + +static int atmel_pmecc_prepare_user_req(struct atmel_pmecc *pmecc, + struct atmel_pmecc_user_req *req) +{ + int i, max_eccbytes, eccbytes = 0, eccstrength = 0; + + if (req->pagesize <= 0 || req->oobsize <= 0 || req->ecc.bytes <= 0) + return -EINVAL; + + if (req->ecc.ooboffset >= 0 && + req->ecc.ooboffset + req->ecc.bytes > req->oobsize) + return -EINVAL; + + if (req->ecc.sectorsize == ATMEL_PMECC_SECTOR_SIZE_AUTO) { + if (req->ecc.strength != ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH) + return -EINVAL; + + if (req->pagesize > 512) + req->ecc.sectorsize = 1024; + else + req->ecc.sectorsize = 512; + } + + if (req->ecc.sectorsize != 512 && req->ecc.sectorsize != 1024) + return -EINVAL; + + if (req->pagesize % req->ecc.sectorsize) + return -EINVAL; + + req->ecc.nsectors = req->pagesize / req->ecc.sectorsize; + + max_eccbytes = req->ecc.bytes; + + for (i = 0; i < pmecc->caps->nstrengths; i++) { + int nbytes, strength = pmecc->caps->strengths[i]; + + if (req->ecc.strength != ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH && + strength < req->ecc.strength) + continue; + + nbytes = DIV_ROUND_UP(strength * fls(8 * req->ecc.sectorsize), + 8); + nbytes *= req->ecc.nsectors; + + if (nbytes > max_eccbytes) + break; + + eccstrength = strength; + eccbytes = nbytes; + + if (req->ecc.strength != ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH) + break; + } + + if (!eccstrength) + return -EINVAL; + + req->ecc.bytes = eccbytes; + req->ecc.strength = eccstrength; + + if (req->ecc.ooboffset < 0) + req->ecc.ooboffset = req->oobsize - eccbytes; + + return 0; +} + +struct atmel_pmecc_user * +atmel_pmecc_create_user(struct atmel_pmecc *pmecc, + struct atmel_pmecc_user_req *req) +{ + struct atmel_pmecc_user *user; + const struct atmel_pmecc_gf_tables *gf_tables; + int strength, size, ret; + + ret = atmel_pmecc_prepare_user_req(pmecc, req); + if (ret) + return ERR_PTR(ret); + + size = sizeof(*user); + size = ALIGN(size, sizeof(u16)); + /* Reserve space for partial_syn, si and smu */ + size += ((2 * req->ecc.strength) + 1) * sizeof(u16) * + (2 + req->ecc.strength + 2); + /* Reserve space for lmu. */ + size += (req->ecc.strength + 1) * sizeof(u16); + /* Reserve space for mu, dmu and delta. */ + size = ALIGN(size, sizeof(s32)); + size += (req->ecc.strength + 1) * sizeof(s32) * 3; + + user = kzalloc(size, GFP_KERNEL); + if (!user) + return ERR_PTR(-ENOMEM); + + user->pmecc = pmecc; + + user->partial_syn = (s16 *)PTR_ALIGN(user + 1, sizeof(u16)); + user->si = user->partial_syn + ((2 * req->ecc.strength) + 1); + user->lmu = user->si + ((2 * req->ecc.strength) + 1); + user->smu = user->lmu + (req->ecc.strength + 1); + user->mu = (s32 *)PTR_ALIGN(user->smu + + (((2 * req->ecc.strength) + 1) * + (req->ecc.strength + 2)), + sizeof(s32)); + user->dmu = user->mu + req->ecc.strength + 1; + user->delta = user->dmu + req->ecc.strength + 1; + + gf_tables = atmel_pmecc_get_gf_tables(req); + if (IS_ERR(gf_tables)) { + kfree(user); + return ERR_CAST(gf_tables); + } + + user->gf_tables = gf_tables; + + user->eccbytes = req->ecc.bytes / req->ecc.nsectors; + + for (strength = 0; strength < pmecc->caps->nstrengths; strength++) { + if (pmecc->caps->strengths[strength] == req->ecc.strength) + break; + } + + user->cache.cfg = PMECC_CFG_BCH_STRENGTH(strength) | + PMECC_CFG_NSECTORS(req->ecc.nsectors); + + if (req->ecc.sectorsize == 1024) + user->cache.cfg |= PMECC_CFG_SECTOR1024; + + user->cache.sarea = req->oobsize - 1; + user->cache.saddr = req->ecc.ooboffset; + user->cache.eaddr = req->ecc.ooboffset + req->ecc.bytes - 1; + + return user; +} +EXPORT_SYMBOL_GPL(atmel_pmecc_create_user); + +void atmel_pmecc_destroy_user(struct atmel_pmecc_user *user) +{ + kfree(user); +} +EXPORT_SYMBOL_GPL(atmel_pmecc_destroy_user); + +static int get_strength(struct atmel_pmecc_user *user) +{ + const int *strengths = user->pmecc->caps->strengths; + + return strengths[user->cache.cfg & PMECC_CFG_BCH_STRENGTH_MASK]; +} + +static int get_sectorsize(struct atmel_pmecc_user *user) +{ + return user->cache.cfg & PMECC_CFG_SECTOR1024 ? 1024 : 512; +} + +static void atmel_pmecc_gen_syndrome(struct atmel_pmecc_user *user, int sector) +{ + int strength = get_strength(user); + u32 value; + int i; + + /* Fill odd syndromes */ + for (i = 0; i < strength; i++) { + value = readl_relaxed(user->pmecc->regs.base + + ATMEL_PMECC_REM(sector, i / 2)); + if (i & 1) + value >>= 16; + + user->partial_syn[(2 * i) + 1] = value; + } +} + +static void atmel_pmecc_substitute(struct atmel_pmecc_user *user) +{ + int degree = get_sectorsize(user) == 512 ? 13 : 14; + int cw_len = BIT(degree) - 1; + int strength = get_strength(user); + s16 *alpha_to = (s16 *)user->gf_tables->alpha_to; + s16 *index_of = (s16 *)user->gf_tables->index_of; + s16 *partial_syn = user->partial_syn; + s16 *si; + int i, j; + + /* + * si[] is a table that holds the current syndrome value, + * an element of that table belongs to the field + */ + si = user->si; + + memset(&si[1], 0, sizeof(s16) * ((2 * strength) - 1)); + + /* Computation 2t syndromes based on S(x) */ + /* Odd syndromes */ + for (i = 1; i < 2 * strength; i += 2) { + for (j = 0; j < degree; j++) { + if (partial_syn[i] & BIT(j)) + si[i] = alpha_to[i * j] ^ si[i]; + } + } + /* Even syndrome = (Odd syndrome) ** 2 */ + for (i = 2, j = 1; j <= strength; i = ++j << 1) { + if (si[j] == 0) { + si[i] = 0; + } else { + s16 tmp; + + tmp = index_of[si[j]]; + tmp = (tmp * 2) % cw_len; + si[i] = alpha_to[tmp]; + } + } +} + +static void atmel_pmecc_get_sigma(struct atmel_pmecc_user *user) +{ + s16 *lmu = user->lmu; + s16 *si = user->si; + s32 *mu = user->mu; + s32 *dmu = user->dmu; + s32 *delta = user->delta; + int degree = get_sectorsize(user) == 512 ? 13 : 14; + int cw_len = BIT(degree) - 1; + int strength = get_strength(user); + int num = 2 * strength + 1; + s16 *index_of = (s16 *)user->gf_tables->index_of; + s16 *alpha_to = (s16 *)user->gf_tables->alpha_to; + int i, j, k; + u32 dmu_0_count, tmp; + s16 *smu = user->smu; + + /* index of largest delta */ + int ro; + int largest; + int diff; + + dmu_0_count = 0; + + /* First Row */ + + /* Mu */ + mu[0] = -1; + + memset(smu, 0, sizeof(s16) * num); + smu[0] = 1; + + /* discrepancy set to 1 */ + dmu[0] = 1; + /* polynom order set to 0 */ + lmu[0] = 0; + delta[0] = (mu[0] * 2 - lmu[0]) >> 1; + + /* Second Row */ + + /* Mu */ + mu[1] = 0; + /* Sigma(x) set to 1 */ + memset(&smu[num], 0, sizeof(s16) * num); + smu[num] = 1; + + /* discrepancy set to S1 */ + dmu[1] = si[1]; + + /* polynom order set to 0 */ + lmu[1] = 0; + + delta[1] = (mu[1] * 2 - lmu[1]) >> 1; + + /* Init the Sigma(x) last row */ + memset(&smu[(strength + 1) * num], 0, sizeof(s16) * num); + + for (i = 1; i <= strength; i++) { + mu[i + 1] = i << 1; + /* Begin Computing Sigma (Mu+1) and L(mu) */ + /* check if discrepancy is set to 0 */ + if (dmu[i] == 0) { + dmu_0_count++; + + tmp = ((strength - (lmu[i] >> 1) - 1) / 2); + if ((strength - (lmu[i] >> 1) - 1) & 0x1) + tmp += 2; + else + tmp += 1; + + if (dmu_0_count == tmp) { + for (j = 0; j <= (lmu[i] >> 1) + 1; j++) + smu[(strength + 1) * num + j] = + smu[i * num + j]; + + lmu[strength + 1] = lmu[i]; + return; + } + + /* copy polynom */ + for (j = 0; j <= lmu[i] >> 1; j++) + smu[(i + 1) * num + j] = smu[i * num + j]; + + /* copy previous polynom order to the next */ + lmu[i + 1] = lmu[i]; + } else { + ro = 0; + largest = -1; + /* find largest delta with dmu != 0 */ + for (j = 0; j < i; j++) { + if ((dmu[j]) && (delta[j] > largest)) { + largest = delta[j]; + ro = j; + } + } + + /* compute difference */ + diff = (mu[i] - mu[ro]); + + /* Compute degree of the new smu polynomial */ + if ((lmu[i] >> 1) > ((lmu[ro] >> 1) + diff)) + lmu[i + 1] = lmu[i]; + else + lmu[i + 1] = ((lmu[ro] >> 1) + diff) * 2; + + /* Init smu[i+1] with 0 */ + for (k = 0; k < num; k++) + smu[(i + 1) * num + k] = 0; + + /* Compute smu[i+1] */ + for (k = 0; k <= lmu[ro] >> 1; k++) { + s16 a, b, c; + + if (!(smu[ro * num + k] && dmu[i])) + continue; + + a = index_of[dmu[i]]; + b = index_of[dmu[ro]]; + c = index_of[smu[ro * num + k]]; + tmp = a + (cw_len - b) + c; + a = alpha_to[tmp % cw_len]; + smu[(i + 1) * num + (k + diff)] = a; + } + + for (k = 0; k <= lmu[i] >> 1; k++) + smu[(i + 1) * num + k] ^= smu[i * num + k]; + } + + /* End Computing Sigma (Mu+1) and L(mu) */ + /* In either case compute delta */ + delta[i + 1] = (mu[i + 1] * 2 - lmu[i + 1]) >> 1; + + /* Do not compute discrepancy for the last iteration */ + if (i >= strength) + continue; + + for (k = 0; k <= (lmu[i + 1] >> 1); k++) { + tmp = 2 * (i - 1); + if (k == 0) { + dmu[i + 1] = si[tmp + 3]; + } else if (smu[(i + 1) * num + k] && si[tmp + 3 - k]) { + s16 a, b, c; + + a = index_of[smu[(i + 1) * num + k]]; + b = si[2 * (i - 1) + 3 - k]; + c = index_of[b]; + tmp = a + c; + tmp %= cw_len; + dmu[i + 1] = alpha_to[tmp] ^ dmu[i + 1]; + } + } + } +} + +static int atmel_pmecc_err_location(struct atmel_pmecc_user *user) +{ + int sector_size = get_sectorsize(user); + int degree = sector_size == 512 ? 13 : 14; + struct atmel_pmecc *pmecc = user->pmecc; + int strength = get_strength(user); + int ret, roots_nbr, i, err_nbr = 0; + int num = (2 * strength) + 1; + s16 *smu = user->smu; + u32 val; + + writel(PMERRLOC_DISABLE, pmecc->regs.errloc + ATMEL_PMERRLOC_ELDIS); + + for (i = 0; i <= user->lmu[strength + 1] >> 1; i++) { + writel_relaxed(smu[(strength + 1) * num + i], + pmecc->regs.errloc + ATMEL_PMERRLOC_SIGMA(i)); + err_nbr++; + } + + val = (err_nbr - 1) << 16; + if (sector_size == 1024) + val |= 1; + + writel(val, pmecc->regs.errloc + ATMEL_PMERRLOC_ELCFG); + writel((sector_size * 8) + (degree * strength), + pmecc->regs.errloc + ATMEL_PMERRLOC_ELEN); + + ret = readl_relaxed_poll_timeout(pmecc->regs.errloc + + ATMEL_PMERRLOC_ELISR, + val, val & PMERRLOC_CALC_DONE, + PMECC_MAX_TIMEOUT_MS * 1000); + if (ret) { + dev_err(pmecc->dev, + "PMECC: Timeout to calculate error location.\n"); + return ret; + } + + roots_nbr = (val & PMERRLOC_ERR_NUM_MASK) >> 8; + /* Number of roots == degree of smu hence <= cap */ + if (roots_nbr == user->lmu[strength + 1] >> 1) + return err_nbr - 1; + + /* + * Number of roots does not match the degree of smu + * unable to correct error. + */ + return -EBADMSG; +} + +int atmel_pmecc_correct_sector(struct atmel_pmecc_user *user, int sector, + void *data, void *ecc) +{ + struct atmel_pmecc *pmecc = user->pmecc; + int sectorsize = get_sectorsize(user); + int eccbytes = user->eccbytes; + int i, nerrors; + + if (!(user->isr & BIT(sector))) + return 0; + + atmel_pmecc_gen_syndrome(user, sector); + atmel_pmecc_substitute(user); + atmel_pmecc_get_sigma(user); + + nerrors = atmel_pmecc_err_location(user); + if (nerrors < 0) + return nerrors; + + for (i = 0; i < nerrors; i++) { + const char *area; + int byte, bit; + u32 errpos; + u8 *ptr; + + errpos = readl_relaxed(pmecc->regs.errloc + + ATMEL_PMERRLOC_EL(pmecc->caps->el_offset, i)); + errpos--; + + byte = errpos / 8; + bit = errpos % 8; + + if (byte < sectorsize) { + ptr = data + byte; + area = "data"; + } else if (byte < sectorsize + eccbytes) { + ptr = ecc + byte - sectorsize; + area = "ECC"; + } else { + dev_dbg(pmecc->dev, + "Invalid errpos value (%d, max is %d)\n", + errpos, (sectorsize + eccbytes) * 8); + return -EINVAL; + } + + dev_dbg(pmecc->dev, + "Bit flip in %s area, byte %d: 0x%02x -> 0x%02x\n", + area, byte, *ptr, (unsigned int)(*ptr ^ BIT(bit))); + + *ptr ^= BIT(bit); + } + + return nerrors; +} +EXPORT_SYMBOL_GPL(atmel_pmecc_correct_sector); + +bool atmel_pmecc_correct_erased_chunks(struct atmel_pmecc_user *user) +{ + return user->pmecc->caps->correct_erased_chunks; +} +EXPORT_SYMBOL_GPL(atmel_pmecc_correct_erased_chunks); + +void atmel_pmecc_get_generated_eccbytes(struct atmel_pmecc_user *user, + int sector, void *ecc) +{ + struct atmel_pmecc *pmecc = user->pmecc; + u8 *ptr = ecc; + int i; + + for (i = 0; i < user->eccbytes; i++) + ptr[i] = readb_relaxed(pmecc->regs.base + + ATMEL_PMECC_ECC(sector, i)); +} +EXPORT_SYMBOL_GPL(atmel_pmecc_get_generated_eccbytes); + +void atmel_pmecc_reset(struct atmel_pmecc *pmecc) +{ + writel(PMECC_CTRL_RST, pmecc->regs.base + ATMEL_PMECC_CTRL); + writel(PMECC_CTRL_DISABLE, pmecc->regs.base + ATMEL_PMECC_CTRL); +} +EXPORT_SYMBOL_GPL(atmel_pmecc_reset); + +int atmel_pmecc_enable(struct atmel_pmecc_user *user, int op) +{ + struct atmel_pmecc *pmecc = user->pmecc; + u32 cfg; + + if (op != NAND_ECC_READ && op != NAND_ECC_WRITE) { + dev_err(pmecc->dev, "Bad ECC operation!"); + return -EINVAL; + } + + mutex_lock(&user->pmecc->lock); + + cfg = user->cache.cfg; + if (op == NAND_ECC_WRITE) + cfg |= PMECC_CFG_WRITE_OP; + else + cfg |= PMECC_CFG_AUTO_ENABLE; + + writel(cfg, pmecc->regs.base + ATMEL_PMECC_CFG); + writel(user->cache.sarea, pmecc->regs.base + ATMEL_PMECC_SAREA); + writel(user->cache.saddr, pmecc->regs.base + ATMEL_PMECC_SADDR); + writel(user->cache.eaddr, pmecc->regs.base + ATMEL_PMECC_EADDR); + + writel(PMECC_CTRL_ENABLE, pmecc->regs.base + ATMEL_PMECC_CTRL); + writel(PMECC_CTRL_DATA, pmecc->regs.base + ATMEL_PMECC_CTRL); + + return 0; +} +EXPORT_SYMBOL_GPL(atmel_pmecc_enable); + +void atmel_pmecc_disable(struct atmel_pmecc_user *user) +{ + atmel_pmecc_reset(user->pmecc); + mutex_unlock(&user->pmecc->lock); +} +EXPORT_SYMBOL_GPL(atmel_pmecc_disable); + +int atmel_pmecc_wait_rdy(struct atmel_pmecc_user *user) +{ + struct atmel_pmecc *pmecc = user->pmecc; + u32 status; + int ret; + + ret = readl_relaxed_poll_timeout(pmecc->regs.base + + ATMEL_PMECC_SR, + status, !(status & PMECC_SR_BUSY), + PMECC_MAX_TIMEOUT_MS * 1000); + if (ret) { + dev_err(pmecc->dev, + "Timeout while waiting for PMECC ready.\n"); + return ret; + } + + user->isr = readl_relaxed(pmecc->regs.base + ATMEL_PMECC_ISR); + + return 0; +} +EXPORT_SYMBOL_GPL(atmel_pmecc_wait_rdy); + +#define ATMEL_BASE_PMECC 0xffffe000 +#define ATMEL_BASE_PMERRLOC 0xffffe600 + +static struct atmel_pmecc * +atmel_pmecc_create(struct udevice *dev, + const struct atmel_pmecc_caps *caps, + int pmecc_res_idx, int errloc_res_idx, + int timing_res_idx) +{ + struct atmel_pmecc *pmecc; + struct resource res; + + pmecc = devm_kzalloc(dev, sizeof(*pmecc), GFP_KERNEL); + if (!pmecc) + return ERR_PTR(-ENOMEM); + + pmecc->caps = caps; + pmecc->dev = dev; + mutex_init(&pmecc->lock); + + ofnode_read_resource(dev->node_, 0, &res); + pmecc->regs.base = (void *)res.start; + ofnode_read_resource(dev->node_, 1, &res); + pmecc->regs.errloc = (void *)res.start; + + pmecc->regs.timing = 0; + + /* Disable all interrupts before registering the PMECC handler. */ + writel(0xffffffff, pmecc->regs.base + ATMEL_PMECC_IDR); + atmel_pmecc_reset(pmecc); + + return pmecc; +} + +static void devm_atmel_pmecc_put(struct udevice *dev, void *res) +{ +} + +static struct atmel_pmecc *atmel_pmecc_get_by_node(struct udevice *dev) +{ + struct atmel_pmecc *pmecc, **ptr; + int ret; + + pmecc = dev_get_plat(dev); + if (!pmecc) { + ret = -EPROBE_DEFER; + goto err_put_device; + } + + ptr = devres_alloc(devm_atmel_pmecc_put, sizeof(*ptr), GFP_KERNEL); + if (!ptr) { + ret = -ENOMEM; + goto err_put_device; + } + + *ptr = pmecc; + + devres_add(dev, ptr); + + return pmecc; + +err_put_device: + return ERR_PTR(ret); +} + +static const int atmel_pmecc_strengths[] = { 2, 4, 8, 12, 24, 32 }; + +static struct atmel_pmecc_caps at91sam9g45_caps = { + .strengths = atmel_pmecc_strengths, + .nstrengths = 5, + .el_offset = 0x8c, +}; + +static struct atmel_pmecc_caps sama5d4_caps = { + .strengths = atmel_pmecc_strengths, + .nstrengths = 5, + .el_offset = 0x8c, + .correct_erased_chunks = true, +}; + +static struct atmel_pmecc_caps sama5d2_caps = { + .strengths = atmel_pmecc_strengths, + .nstrengths = 6, + .el_offset = 0xac, + .correct_erased_chunks = true, +}; + +struct atmel_pmecc *devm_atmel_pmecc_get(struct udevice *userdev) +{ + struct atmel_pmecc *pmecc; + struct ofnode_phandle_args args; + struct udevice *pdev; + int ret; + + if (!userdev) + return ERR_PTR(-EINVAL); + + ret = ofnode_parse_phandle_with_args(userdev->node_, + "ecc-engine", + NULL, 0, 0, &args); + ret = uclass_get_device_by_ofnode(UCLASS_MTD, args.node, &pdev); + if (ret) + return NULL; + + pmecc = atmel_pmecc_get_by_node(pdev); + + /* TODO: + * Support old DT bindings + */ + + return pmecc; +} +EXPORT_SYMBOL(devm_atmel_pmecc_get); + +static const struct udevice_id atmel_pmecc_match[] = { + { .compatible = "atmel,at91sam9g45-pmecc", (ulong)&at91sam9g45_caps }, + { .compatible = "atmel,sama5d4-pmecc", (ulong)&sama5d4_caps }, + { .compatible = "atmel,sama5d2-pmecc", (ulong)&sama5d2_caps }, + { /* sentinel */ } +}; + +static int atmel_pmecc_probe(struct udevice *dev) +{ + const struct atmel_pmecc_caps *caps; + struct atmel_pmecc *pmecc; + + caps = (struct atmel_pmecc_caps *)dev_get_driver_data(dev); + if (!caps) { + dev_err(dev, "Invalid caps\n"); + return -EINVAL; + } + + pmecc = atmel_pmecc_create(dev, caps, 0, 1, 2); + if (IS_ERR(pmecc)) + return PTR_ERR(pmecc); + + dev->plat_ = pmecc; + + return 0; +} + +U_BOOT_DRIVER(atmel_pmecc) = { + .name = "atmel-pmecc", + .id = UCLASS_MTD, + .of_match = atmel_pmecc_match, + .probe = atmel_pmecc_probe, +}; diff --git a/drivers/mtd/nand/raw/atmel/pmecc.h b/drivers/mtd/nand/raw/atmel/pmecc.h new file mode 100644 index 0000000000..43f96b2f16 --- /dev/null +++ b/drivers/mtd/nand/raw/atmel/pmecc.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * © Copyright 2016 ATMEL + * © Copyright 2016 Free Electrons + * + * Author: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * Derived from the atmel_nand.c driver which contained the following + * copyrights: + * + * Copyright © 2003 Rick Bronson + * + * Derived from drivers/mtd/nand/autcpu12.c (removed in v3.8) + * Copyright © 2001 Thomas Gleixner (gleixner@autronix.de) + * + * Derived from drivers/mtd/spia.c (removed in v3.8) + * Copyright © 2000 Steven J. Hill (sjhill@cotw.com) + * + * + * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263 + * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright © 2007 + * + * Derived from Das U-Boot source code + * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c) + * © Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * Add Programmable Multibit ECC support for various AT91 SoC + * © Copyright 2012 ATMEL, Hong Xu + * + * Add Nand Flash Controller support for SAMA5 SoC + * © Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com) + */ + +#ifndef ATMEL_PMECC_H +#define ATMEL_PMECC_H + +#define ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH 0 +#define ATMEL_PMECC_SECTOR_SIZE_AUTO 0 +#define ATMEL_PMECC_OOBOFFSET_AUTO -1 + +struct atmel_pmecc_user_req { + int pagesize; + int oobsize; + struct { + int strength; + int bytes; + int sectorsize; + int nsectors; + int ooboffset; + } ecc; +}; + +struct atmel_pmecc_suspend_ctx { + u32 setup; + u32 pulse; + u32 cycle; + u32 timings; + u32 mode; +}; + +struct atmel_pmecc { + struct udevice *dev; + const struct atmel_pmecc_caps *caps; + + struct { + void __iomem *base; + void __iomem *errloc; + void __iomem *timing; + } regs; + + /* Mutex used for pmecc enable/disable */ + struct mutex lock; + + struct atmel_pmecc_suspend_ctx suspend; +}; + +struct atmel_pmecc *devm_atmel_pmecc_get(struct udevice *dev); + +struct atmel_pmecc_user * +atmel_pmecc_create_user(struct atmel_pmecc *pmecc, + struct atmel_pmecc_user_req *req); +void atmel_pmecc_destroy_user(struct atmel_pmecc_user *user); + +void atmel_pmecc_reset(struct atmel_pmecc *pmecc); +int atmel_pmecc_enable(struct atmel_pmecc_user *user, int op); +void atmel_pmecc_disable(struct atmel_pmecc_user *user); +int atmel_pmecc_wait_rdy(struct atmel_pmecc_user *user); +int atmel_pmecc_correct_sector(struct atmel_pmecc_user *user, int sector, + void *data, void *ecc); +bool atmel_pmecc_correct_erased_chunks(struct atmel_pmecc_user *user); +void atmel_pmecc_get_generated_eccbytes(struct atmel_pmecc_user *user, + int sector, void *ecc); + +#endif /* ATMEL_PMECC_H */ diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 4cb0ba0850..e4039d7474 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -211,4 +211,12 @@ config RESET_DRA7 help Support for TI DRA7-RESET subsystem. Basic Assert/Deassert is supported. + +config RESET_AT91 + bool "Enable support for Microchip/Atmel Reset Controller driver" + depends on DM_RESET && ARCH_AT91 + help + This enables the Reset Controller driver support for Microchip/Atmel + SoCs. Mainly used to expose assert/deassert methods to other drivers + that require it. endmenu diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index 0620b62809..6c8b45ecba 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -31,3 +31,4 @@ obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o obj-$(CONFIG_RESET_SCMI) += reset-scmi.o obj-$(CONFIG_RESET_ZYNQMP) += reset-zynqmp.o obj-$(CONFIG_RESET_DRA7) += reset-dra7.o +obj-$(CONFIG_RESET_AT91) += reset-at91.o diff --git a/drivers/reset/reset-at91.c b/drivers/reset/reset-at91.c new file mode 100644 index 0000000000..165c87acdc --- /dev/null +++ b/drivers/reset/reset-at91.c @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Support for Atmel/Microchip Reset Controller. + * + * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries + * + * Author: Sergiu Moga <sergiu.moga@microchip.com> + */ + +#include <clk.h> +#include <asm/io.h> +#include <dm.h> +#include <dm/lists.h> +#include <reset-uclass.h> +#include <asm/arch/at91_rstc.h> +#include <dt-bindings/reset/sama7g5-reset.h> + +struct at91_reset { + void __iomem *dev_base; + struct at91_reset_data *data; +}; + +struct at91_reset_data { + u32 n_device_reset; + u8 device_reset_min_id; + u8 device_reset_max_id; +}; + +static const struct at91_reset_data sama7g5_data = { + .n_device_reset = 3, + .device_reset_min_id = SAMA7G5_RESET_USB_PHY1, + .device_reset_max_id = SAMA7G5_RESET_USB_PHY3, +}; + +static int at91_rst_update(struct at91_reset *reset, unsigned long id, + bool assert) +{ + u32 val; + + if (!reset->dev_base) + return 0; + + val = readl(reset->dev_base); + if (assert) + val |= BIT(id); + else + val &= ~BIT(id); + writel(val, reset->dev_base); + + return 0; +} + +static int at91_reset_of_xlate(struct reset_ctl *reset_ctl, + struct ofnode_phandle_args *args) +{ + struct at91_reset *reset = dev_get_priv(reset_ctl->dev); + + if (!reset->data->n_device_reset || + args->args[0] < reset->data->device_reset_min_id || + args->args[0] > reset->data->device_reset_max_id) + return -EINVAL; + + reset_ctl->id = args->args[0]; + + return 0; +} + +static int at91_rst_assert(struct reset_ctl *reset_ctl) +{ + struct at91_reset *reset = dev_get_priv(reset_ctl->dev); + + return at91_rst_update(reset, reset_ctl->id, true); +} + +static int at91_rst_deassert(struct reset_ctl *reset_ctl) +{ + struct at91_reset *reset = dev_get_priv(reset_ctl->dev); + + return at91_rst_update(reset, reset_ctl->id, false); +} + +struct reset_ops at91_reset_ops = { + .of_xlate = at91_reset_of_xlate, + .rst_assert = at91_rst_assert, + .rst_deassert = at91_rst_deassert, +}; + +static int at91_reset_probe(struct udevice *dev) +{ + struct at91_reset *reset = dev_get_priv(dev); + struct clk sclk; + int ret; + + reset->data = (struct at91_reset_data *)dev_get_driver_data(dev); + reset->dev_base = dev_remap_addr_index(dev, 1); + if (reset->data && reset->data->n_device_reset && !reset->dev_base) + return -EINVAL; + + ret = clk_get_by_index(dev, 0, &sclk); + if (ret) + return ret; + + return clk_prepare_enable(&sclk); +} + +static int at91_reset_bind(struct udevice *dev) +{ + struct udevice *at91_sysreset; + + if (CONFIG_IS_ENABLED(SYSRESET_AT91)) + return device_bind_driver_to_node(dev, "at91_sysreset", + "at91_sysreset", + dev_ofnode(dev), + &at91_sysreset); + + return 0; +} + +static const struct udevice_id at91_reset_ids[] = { + { + .compatible = "microchip,sama7g5-rstc", + .data = (ulong)&sama7g5_data, + }, + { + .compatible = "atmel,sama5d3-rstc", + }, + { + .compatible = "microchip,sam9x60-rstc", + }, + { } +}; + +U_BOOT_DRIVER(at91_reset) = { + .name = "at91_reset", + .id = UCLASS_RESET, + .of_match = at91_reset_ids, + .bind = at91_reset_bind, + .probe = at91_reset_probe, + .priv_auto = sizeof(struct at91_reset), + .ops = &at91_reset_ops, +}; diff --git a/drivers/sysreset/sysreset_at91.c b/drivers/sysreset/sysreset_at91.c index 24b87ee987..fc85f31ebf 100644 --- a/drivers/sysreset/sysreset_at91.c +++ b/drivers/sysreset/sysreset_at91.c @@ -56,16 +56,9 @@ static struct sysreset_ops at91_sysreset = { .request = at91_sysreset_request, }; -static const struct udevice_id a91_sysreset_ids[] = { - { .compatible = "atmel,sama5d3-rstc" }, - { .compatible = "microchip,sam9x60-rstc" }, - { } -}; - U_BOOT_DRIVER(sysreset_at91) = { .id = UCLASS_SYSRESET, - .name = "at91_reset", + .name = "at91_sysreset", .ops = &at91_sysreset, .probe = at91_sysreset_probe, - .of_match = a91_sysreset_ids, }; diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h index 2c761821ef..af504e0efa 100644 --- a/include/configs/sam9x60ek.h +++ b/include/configs/sam9x60ek.h @@ -26,13 +26,4 @@ #define CFG_SYS_SDRAM_BASE 0x20000000 #define CFG_SYS_SDRAM_SIZE 0x10000000 /* 256 megs */ -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CFG_SYS_NAND_BASE 0x40000000 -#define CFG_SYS_NAND_MASK_ALE BIT(21) -#define CFG_SYS_NAND_MASK_CLE BIT(22) -#define CFG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 -#define CFG_SYS_NAND_READY_PIN AT91_PIN_PD5 -#endif - #endif diff --git a/include/dt-bindings/clk/at91.h b/include/dt-bindings/clk/at91.h index e30756b280..a178b94157 100644 --- a/include/dt-bindings/clk/at91.h +++ b/include/dt-bindings/clk/at91.h @@ -18,5 +18,10 @@ #define PMC_TYPE_PERIPHERAL 3 #define PMC_TYPE_GCK 4 #define PMC_TYPE_SLOW 5 +#define USB_UTMI 6 + +#define USB_UTMI1 0 +#define USB_UTMI2 1 +#define USB_UTMI3 2 #endif diff --git a/include/dt-bindings/mfd/at91-usart.h b/include/dt-bindings/mfd/at91-usart.h new file mode 100644 index 0000000000..2de5bc312e --- /dev/null +++ b/include/dt-bindings/mfd/at91-usart.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides macros for AT91 USART DT bindings. + * + * Copyright (C) 2018 Microchip Technology + * + * Author: Radu Pirea <radu.pirea@microchip.com> + * + */ + +#ifndef __DT_BINDINGS_AT91_USART_H__ +#define __DT_BINDINGS_AT91_USART_H__ + +#define AT91_USART_MODE_SERIAL 0 +#define AT91_USART_MODE_SPI 1 + +#endif /* __DT_BINDINGS_AT91_USART_H__ */ diff --git a/include/dt-bindings/reset/sama7g5-reset.h b/include/dt-bindings/reset/sama7g5-reset.h new file mode 100644 index 0000000000..2116f41d04 --- /dev/null +++ b/include/dt-bindings/reset/sama7g5-reset.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ + +#ifndef __DT_BINDINGS_RESET_SAMA7G5_H +#define __DT_BINDINGS_RESET_SAMA7G5_H + +#define SAMA7G5_RESET_USB_PHY1 4 +#define SAMA7G5_RESET_USB_PHY2 5 +#define SAMA7G5_RESET_USB_PHY3 6 + +#endif /* __DT_BINDINGS_RESET_SAMA7G5_H */ diff --git a/include/linux/mfd/syscon/atmel-matrix.h b/include/linux/mfd/syscon/atmel-matrix.h new file mode 100644 index 0000000000..dd228cab67 --- /dev/null +++ b/include/linux/mfd/syscon/atmel-matrix.h @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2014 Atmel Corporation. + * + * Memory Controllers (MATRIX, EBI) - System peripherals registers. + */ + +#ifndef _LINUX_MFD_SYSCON_ATMEL_MATRIX_H +#define _LINUX_MFD_SYSCON_ATMEL_MATRIX_H + +#define AT91SAM9260_MATRIX_MCFG 0x00 +#define AT91SAM9260_MATRIX_SCFG 0x40 +#define AT91SAM9260_MATRIX_PRS 0x80 +#define AT91SAM9260_MATRIX_MRCR 0x100 +#define AT91SAM9260_MATRIX_EBICSA 0x11c + +#define AT91SAM9261_MATRIX_MRCR 0x0 +#define AT91SAM9261_MATRIX_SCFG 0x4 +#define AT91SAM9261_MATRIX_TCR 0x24 +#define AT91SAM9261_MATRIX_EBICSA 0x30 +#define AT91SAM9261_MATRIX_USBPUCR 0x34 + +#define AT91SAM9263_MATRIX_MCFG 0x00 +#define AT91SAM9263_MATRIX_SCFG 0x40 +#define AT91SAM9263_MATRIX_PRS 0x80 +#define AT91SAM9263_MATRIX_MRCR 0x100 +#define AT91SAM9263_MATRIX_TCR 0x114 +#define AT91SAM9263_MATRIX_EBI0CSA 0x120 +#define AT91SAM9263_MATRIX_EBI1CSA 0x124 + +#define AT91SAM9RL_MATRIX_MCFG 0x00 +#define AT91SAM9RL_MATRIX_SCFG 0x40 +#define AT91SAM9RL_MATRIX_PRS 0x80 +#define AT91SAM9RL_MATRIX_MRCR 0x100 +#define AT91SAM9RL_MATRIX_TCR 0x114 +#define AT91SAM9RL_MATRIX_EBICSA 0x120 + +#define AT91SAM9G45_MATRIX_MCFG 0x00 +#define AT91SAM9G45_MATRIX_SCFG 0x40 +#define AT91SAM9G45_MATRIX_PRS 0x80 +#define AT91SAM9G45_MATRIX_MRCR 0x100 +#define AT91SAM9G45_MATRIX_TCR 0x110 +#define AT91SAM9G45_MATRIX_DDRMPR 0x118 +#define AT91SAM9G45_MATRIX_EBICSA 0x128 + +#define AT91SAM9N12_MATRIX_MCFG 0x00 +#define AT91SAM9N12_MATRIX_SCFG 0x40 +#define AT91SAM9N12_MATRIX_PRS 0x80 +#define AT91SAM9N12_MATRIX_MRCR 0x100 +#define AT91SAM9N12_MATRIX_EBICSA 0x118 + +#define AT91SAM9X5_MATRIX_MCFG 0x00 +#define AT91SAM9X5_MATRIX_SCFG 0x40 +#define AT91SAM9X5_MATRIX_PRS 0x80 +#define AT91SAM9X5_MATRIX_MRCR 0x100 +#define AT91SAM9X5_MATRIX_EBICSA 0x120 + +#define SAMA5D3_MATRIX_MCFG 0x00 +#define SAMA5D3_MATRIX_SCFG 0x40 +#define SAMA5D3_MATRIX_PRS 0x80 +#define SAMA5D3_MATRIX_MRCR 0x100 + +#define AT91_MATRIX_MCFG(o, x) ((o) + ((x) * 0x4)) +#define AT91_MATRIX_ULBT GENMASK(2, 0) +#define AT91_MATRIX_ULBT_INFINITE (0 << 0) +#define AT91_MATRIX_ULBT_SINGLE (1 << 0) +#define AT91_MATRIX_ULBT_FOUR (2 << 0) +#define AT91_MATRIX_ULBT_EIGHT (3 << 0) +#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) + +#define AT91_MATRIX_SCFG(o, x) ((o) + ((x) * 0x4)) +#define AT91_MATRIX_SLOT_CYCLE GENMASK(7, 0) +#define AT91_MATRIX_DEFMSTR_TYPE GENMASK(17, 16) +#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) +#define AT91_MATRIX_FIXED_DEFMSTR GENMASK(20, 18) +#define AT91_MATRIX_ARBT GENMASK(25, 24) +#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) +#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) + +#define AT91_MATRIX_ITCM_SIZE GENMASK(3, 0) +#define AT91_MATRIX_ITCM_0 (0 << 0) +#define AT91_MATRIX_ITCM_16 (5 << 0) +#define AT91_MATRIX_ITCM_32 (6 << 0) +#define AT91_MATRIX_ITCM_64 (7 << 0) +#define AT91_MATRIX_DTCM_SIZE GENMASK(7, 4) +#define AT91_MATRIX_DTCM_0 (0 << 4) +#define AT91_MATRIX_DTCM_16 (5 << 4) +#define AT91_MATRIX_DTCM_32 (6 << 4) +#define AT91_MATRIX_DTCM_64 (7 << 4) + +#define AT91_MATRIX_PRAS(o, x) ((o) + ((x) * 0x8)) +#define AT91_MATRIX_PRBS(o, x) ((o) + ((x) * 0x8) + 0x4) +#define AT91_MATRIX_MPR(x) GENMASK(((x) * 0x4) + 1, ((x) * 0x4)) + +#define AT91_MATRIX_RCB(x) BIT(x) + +#define AT91_MATRIX_CSA(cs, val) ((val) << (cs)) +#define AT91_MATRIX_DBPUC BIT(8) +#define AT91_MATRIX_DBPDC BIT(9) +#define AT91_MATRIX_VDDIOMSEL BIT(16) +#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16) +#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16) +#define AT91_MATRIX_EBI_IOSR BIT(17) +#define AT91_MATRIX_DDR_IOSR BIT(18) +#define AT91_MATRIX_NFD0_SELECT BIT(24) +#define AT91_MATRIX_DDR_MP_EN BIT(25) + +#define AT91_MATRIX_USBPUCR_PUON BIT(30) + +#endif /* _LINUX_MFD_SYSCON_ATMEL_MATRIX_H */ diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h new file mode 100644 index 0000000000..74be5a199f --- /dev/null +++ b/include/linux/mfd/syscon/atmel-smc.h @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Atmel SMC (Static Memory Controller) register offsets and bit definitions. + * + * Copyright (C) 2014 Atmel + * Copyright (C) 2014 Free Electrons + * + * Author: Boris Brezillon <boris.brezillon@free-electrons.com> + */ + +#ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_ +#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_ + +#include <linux/kernel.h> +#include <dm/ofnode.h> +#include <regmap.h> + +#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10)) +#define ATMEL_HSMC_SETUP(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14)) +#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4) +#define ATMEL_HSMC_PULSE(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x4) +#define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8) +#define ATMEL_HSMC_CYCLE(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x8) +#define ATMEL_SMC_NWE_SHIFT 0 +#define ATMEL_SMC_NCS_WR_SHIFT 8 +#define ATMEL_SMC_NRD_SHIFT 16 +#define ATMEL_SMC_NCS_RD_SHIFT 24 + +#define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc) +#define ATMEL_HSMC_MODE(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x10) +#define ATMEL_SMC_MODE_READMODE_MASK BIT(0) +#define ATMEL_SMC_MODE_READMODE_NCS (0 << 0) +#define ATMEL_SMC_MODE_READMODE_NRD (1 << 0) +#define ATMEL_SMC_MODE_WRITEMODE_MASK BIT(1) +#define ATMEL_SMC_MODE_WRITEMODE_NCS (0 << 1) +#define ATMEL_SMC_MODE_WRITEMODE_NWE (1 << 1) +#define ATMEL_SMC_MODE_EXNWMODE_MASK GENMASK(5, 4) +#define ATMEL_SMC_MODE_EXNWMODE_DISABLE (0 << 4) +#define ATMEL_SMC_MODE_EXNWMODE_FROZEN (2 << 4) +#define ATMEL_SMC_MODE_EXNWMODE_READY (3 << 4) +#define ATMEL_SMC_MODE_BAT_MASK BIT(8) +#define ATMEL_SMC_MODE_BAT_SELECT (0 << 8) +#define ATMEL_SMC_MODE_BAT_WRITE (1 << 8) +#define ATMEL_SMC_MODE_DBW_MASK GENMASK(13, 12) +#define ATMEL_SMC_MODE_DBW_8 (0 << 12) +#define ATMEL_SMC_MODE_DBW_16 (1 << 12) +#define ATMEL_SMC_MODE_DBW_32 (2 << 12) +#define ATMEL_SMC_MODE_TDF_MASK GENMASK(19, 16) +#define ATMEL_SMC_MODE_TDF(x) (((x) - 1) << 16) +#define ATMEL_SMC_MODE_TDF_MAX 16 +#define ATMEL_SMC_MODE_TDF_MIN 1 +#define ATMEL_SMC_MODE_TDFMODE_OPTIMIZED BIT(20) +#define ATMEL_SMC_MODE_PMEN BIT(24) +#define ATMEL_SMC_MODE_PS_MASK GENMASK(29, 28) +#define ATMEL_SMC_MODE_PS_4 (0 << 28) +#define ATMEL_SMC_MODE_PS_8 (1 << 28) +#define ATMEL_SMC_MODE_PS_16 (2 << 28) +#define ATMEL_SMC_MODE_PS_32 (3 << 28) + +#define ATMEL_HSMC_TIMINGS(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0xc) +#define ATMEL_HSMC_TIMINGS_OCMS BIT(12) +#define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28) +#define ATMEL_HSMC_TIMINGS_NFSEL BIT(31) +#define ATMEL_HSMC_TIMINGS_TCLR_SHIFT 0 +#define ATMEL_HSMC_TIMINGS_TADL_SHIFT 4 +#define ATMEL_HSMC_TIMINGS_TAR_SHIFT 8 +#define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16 +#define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24 + +struct atmel_hsmc_reg_layout { + unsigned int timing_regs_offset; +}; + +/** + * struct atmel_smc_cs_conf - SMC CS config as described in the datasheet. + * @setup: NCS/NWE/NRD setup timings (not applicable to at91rm9200) + * @pulse: NCS/NWE/NRD pulse timings (not applicable to at91rm9200) + * @cycle: NWE/NRD cycle timings (not applicable to at91rm9200) + * @timings: advanced NAND related timings (only applicable to HSMC) + * @mode: all kind of config parameters (see the fields definition above). + * The mode fields are different on at91rm9200 + */ +struct atmel_smc_cs_conf { + u32 setup; + u32 pulse; + u32 cycle; + u32 timings; + u32 mode; +}; + +void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf); +int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf, + unsigned int shift, + unsigned int ncycles); +int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles); +int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles); +int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles); +void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs, + const struct atmel_smc_cs_conf *conf); +void atmel_hsmc_cs_conf_apply(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *reglayout, + int cs, const struct atmel_smc_cs_conf *conf); +void atmel_smc_cs_conf_get(struct regmap *regmap, int cs, + struct atmel_smc_cs_conf *conf); +void atmel_hsmc_cs_conf_get(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *reglayout, + int cs, struct atmel_smc_cs_conf *conf); +const struct atmel_hsmc_reg_layout * +atmel_hsmc_get_reg_layout(ofnode np); + +#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */ |