diff options
386 files changed, 2052 insertions, 1194 deletions
@@ -277,10 +277,17 @@ config SYS_MALLOC_F_LEN default 0x10000 if ARCH_IMX8 || ARCH_IMX8M default 0x2000 help - Before relocation, memory is very limited on many platforms. Still, - we can provide a small malloc() pool if needed. Driver model in - particular needs this to operate, so that it can allocate the - initial serial device and any others that are needed. + Size of the malloc() pool for use before relocation. If + this is defined, then a very simple malloc() implementation + will become available before relocation. The address is just + below the global data, and the stack is moved down to make + space. + + This feature allocates regions with increasing addresses + within the region. calloc() is supported, but realloc() + is not available. free() is supported but does nothing. + The memory will be freed (or in fact just forgotten) when + U-Boot relocates itself. config SYS_MALLOC_LEN hex "Define memory for Dynamic allocation" @@ -295,32 +302,49 @@ config SYS_MALLOC_LEN This defines memory to be allocated for Dynamic allocation TODO: Use for other architectures +config SPL_SYS_MALLOC_F + bool "Enable malloc() pool in SPL" + depends on SPL_FRAMEWORK && SYS_MALLOC_F && SPL + default y + help + In SPL memory is very limited on many platforms. Still, + we can provide a small malloc() pool if needed. Driver model in + particular needs this to operate, so that it can allocate the + initial serial device and any others that are needed. + config SPL_SYS_MALLOC_F_LEN hex "Size of malloc() pool in SPL" - depends on SYS_MALLOC_F && SPL - default 0x0 if !SPL_FRAMEWORK + depends on SPL_SYS_MALLOC_F default 0x2800 if RCAR_GEN3 default 0x2000 if IMX8MQ default SYS_MALLOC_F_LEN help - In SPL memory is very limited on many platforms. Still, - we can provide a small malloc() pool if needed. Driver model in - particular needs this to operate, so that it can allocate the - initial serial device and any others that are needed. + Sets the size of the malloc() pool in SPL. This is used for + driver model and other features, which must allocate memory for + data structures. - It is possible to enable CFG_SYS_SPL_MALLOC_START to start a new + It is possible to enable CFG_SPL_SYS_MALLOC_START to start a new malloc() region in SDRAM once it is inited. -config TPL_SYS_MALLOC_F_LEN - hex "Size of malloc() pool in TPL" +config TPL_SYS_MALLOC_F + bool "Enable malloc() pool in SPL" depends on SYS_MALLOC_F && TPL - default SPL_SYS_MALLOC_F_LEN + default y if SPL_SYS_MALLOC_F help In TPL memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in particular needs this to operate, so that it can allocate the initial serial device and any others that are needed. +config TPL_SYS_MALLOC_F_LEN + hex "Size of malloc() pool in TPL" + depends on TPL_SYS_MALLOC_F + default SPL_SYS_MALLOC_F_LEN + help + Sets the size of the malloc() pool in TPL. This is used for + driver model and other features, which must allocate memory for + data structures. + config VALGRIND bool "Inform valgrind about memory allocations" depends on !RISCV @@ -336,16 +360,25 @@ config VALGRIND it can be handled accurately by Valgrind. If you aren't planning on using valgrind to debug U-Boot, say 'n'. -config VPL_SYS_MALLOC_F_LEN - hex "Size of malloc() pool in VPL before relocation" +config VPL_SYS_MALLOC_F + bool "Enable malloc() pool in VPL" depends on SYS_MALLOC_F && VPL - default SYS_MALLOC_F_LEN + default y if SPL_SYS_MALLOC_F help - Before relocation, memory is very limited on many platforms. Still, + In VPL memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in particular needs this to operate, so that it can allocate the initial serial device and any others that are needed. +config VPL_SYS_MALLOC_F_LEN + hex "Size of malloc() pool in VPL before relocation" + depends on VPL_SYS_MALLOC_F + default SPL_SYS_MALLOC_F_LEN + help + Sets the size of the malloc() pool in VPL. This is used for + driver model and other features, which must allocate memory for + data structures. + menuconfig EXPERT bool "Configure standard U-Boot features (expert users)" default y @@ -1287,7 +1287,7 @@ binary_size_check: u-boot-nodtb.bin FORCE fi ifeq ($(CONFIG_INIT_SP_RELATIVE)$(CONFIG_OF_SEPARATE),yy) -ifneq ($(CONFIG_SYS_MALLOC_F_LEN),) +ifneq ($(CONFIG_SYS_MALLOC_F),) subtract_sys_malloc_f_len = space=$$(($${space} - $(CONFIG_SYS_MALLOC_F_LEN))) else subtract_sys_malloc_f_len = true @@ -1281,24 +1281,6 @@ Configuration Settings: - CONFIG_SYS_MALLOC_LEN: Size of DRAM reserved for malloc() use. -- CONFIG_SYS_MALLOC_F_LEN - Size of the malloc() pool for use before relocation. If - this is defined, then a very simple malloc() implementation - will become available before relocation. The address is just - below the global data, and the stack is moved down to make - space. - - This feature allocates regions with increasing addresses - within the region. calloc() is supported, but realloc() - is not available. free() is supported but does nothing. - The memory will be freed (or in fact just forgotten) when - U-Boot relocates itself. - -- CONFIG_SYS_MALLOC_SIMPLE - Provides a simple and small malloc() and calloc() for those - boards which do not use the full malloc in SPL (which is - enabled with CONFIG_SYS_SPL_MALLOC). - - CFG_SYS_BOOTMAPSZ: Maximum size of memory mapped by the startup code of the Linux kernel; all data that must be processed by diff --git a/arch/arm/cpu/armv7/ls102xa/fdt.c b/arch/arm/cpu/armv7/ls102xa/fdt.c index a5c5c780ae..1c3d24bcad 100644 --- a/arch/arm/cpu/armv7/ls102xa/fdt.c +++ b/arch/arm/cpu/armv7/ls102xa/fdt.c @@ -136,7 +136,7 @@ void ft_cpu_setup(void *blob, struct bd_info *bd) */ off = fdt_add_mem_rsv(blob, CONFIG_TEXT_BASE - UBOOT_HEAD_LEN, CONFIG_SYS_MONITOR_LEN + - CONFIG_SYS_SPL_MALLOC_SIZE + UBOOT_HEAD_LEN); + CONFIG_SPL_SYS_MALLOC_SIZE + UBOOT_HEAD_LEN); if (off < 0) printf("Failed to reserve memory for SD boot deep sleep: %s\n", fdt_strerror(off)); diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon index b3c6693a42..2bbe4e2d12 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.falcon @@ -30,7 +30,7 @@ to understand the device tree in FIT image should be the one actually used, or leave it absent to favor the stored sectors. It is easier to deploy the FIT image with embedded static device tree to multiple boards. -Macro CONFIG_SYS_SPL_ARGS_ADDR serves two purposes. One is the pointer to load +Macro CONFIG_SPL_PAYLOAD_ARGS_ADDR serves two purposes. One is the pointer to load the stored sectors to. Normally this is the static device tree. The second purpose is the memory location of signature header for secure boot. After the FIT image is loaded into memory, it is validated against the signature header diff --git a/arch/arm/lib/bdinfo.c b/arch/arm/lib/bdinfo.c index 5e6eaad968..b88b01eefd 100644 --- a/arch/arm/lib/bdinfo.c +++ b/arch/arm/lib/bdinfo.c @@ -57,7 +57,7 @@ void arch_print_bdinfo(void) #ifdef CONFIG_BOARD_TYPES printf("Board Type = %ld\n", gd->board_type); #endif -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) printf("Early malloc usage: %lx / %x\n", gd->malloc_ptr, CONFIG_VAL(SYS_MALLOC_F_LEN)); #endif diff --git a/arch/arm/mach-rockchip/rv1126/Kconfig b/arch/arm/mach-rockchip/rv1126/Kconfig index 7382c55996..a6e2b5903c 100644 --- a/arch/arm/mach-rockchip/rv1126/Kconfig +++ b/arch/arm/mach-rockchip/rv1126/Kconfig @@ -42,6 +42,9 @@ config TPL_LDSCRIPT config TPL_STACK default 0xff718000 +config TPL_SYS_MALLOC_F + default y + config TPL_SYS_MALLOC_F_LEN default 0x2000 diff --git a/arch/arm/mach-snapdragon/Kconfig b/arch/arm/mach-snapdragon/Kconfig index 914f4d9605..0e073045be 100644 --- a/arch/arm/mach-snapdragon/Kconfig +++ b/arch/arm/mach-snapdragon/Kconfig @@ -6,6 +6,9 @@ config SYS_SOC config SYS_MALLOC_F_LEN default 0x2000 +config SPL_SYS_MALLOC_F + default y + config SPL_SYS_MALLOC_F_LEN default 0x2000 diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 503c82d388..114d243812 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -30,6 +30,9 @@ config SPL_SIZE_LIMIT_PROVIDE_STACK config SPL_STACK_R_ADDR default 0x00800000 if TARGET_SOCFPGA_GEN5 +config SPL_SYS_MALLOC_F + default y if TARGET_SOCFPGA_GEN5 + config SPL_SYS_MALLOC_F_LEN default 0x800 if TARGET_SOCFPGA_GEN5 diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index 2acc21d587..a95c95bc78 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -46,7 +46,7 @@ sp, sp, GD_SIZE # reserve space for gd and sp, sp, t0 # force 16 byte alignment move k0, sp # save gd pointer -#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \ +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) && \ !CONFIG_IS_ENABLED(INIT_STACK_WITHOUT_MALLOC_F) li t2, CONFIG_VAL(SYS_MALLOC_F_LEN) PTR_SUBU \ @@ -63,7 +63,7 @@ blt t0, t1, 1b nop -#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \ +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) && \ !CONFIG_IS_ENABLED(INIT_STACK_WITHOUT_MALLOC_F) PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset #endif diff --git a/arch/mips/mach-mtmips/mt7621/spl/start.S b/arch/mips/mach-mtmips/mt7621/spl/start.S index d2f9c031cb..d56e624f31 100644 --- a/arch/mips/mach-mtmips/mt7621/spl/start.S +++ b/arch/mips/mach-mtmips/mt7621/spl/start.S @@ -37,7 +37,7 @@ sp, sp, GD_SIZE # reserve space for gd and sp, sp, t0 # force 16 byte alignment move k0, sp # save gd pointer -#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \ +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) && \ !CONFIG_IS_ENABLED(INIT_STACK_WITHOUT_MALLOC_F) li t2, CONFIG_VAL(SYS_MALLOC_F_LEN) PTR_SUBU \ @@ -54,7 +54,7 @@ blt t0, t1, 1b nop -#if CONFIG_VAL(SYS_MALLOC_F_LEN) && \ +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) && \ !CONFIG_IS_ENABLED(INIT_STACK_WITHOUT_MALLOC_F) PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset #endif diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 6749263da8..d72d3147f6 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -244,7 +244,7 @@ in_flash: cmplw r3, r4 bne 1b -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) #if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CFG_SYS_INIT_RAM_SIZE #error "SYS_MALLOC_F_LEN too large to fit into initial RAM." diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 562b6993b9..e9c3042773 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1233,7 +1233,7 @@ _start_cont: lis r3,(CFG_SYS_INIT_RAM_ADDR)@h ori r3,r3,((CFG_SYS_INIT_SP_OFFSET-16)&~0xf)@l /* Align to 16 */ -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) #if CONFIG_VAL(SYS_MALLOC_F_LEN) + GENERATED_GBL_DATA_SIZE > CFG_SYS_INIT_RAM_SIZE #error "SYS_MALLOC_F_LEN too large to fit into initial RAM." #endif @@ -1253,7 +1253,7 @@ _start_cont: cmplw r4,r3 bne 1b -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) lis r4,SYS_INIT_SP_ADDR@h ori r4,r4,SYS_INIT_SP_ADDR@l diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c index 1026898727..2c8a72590b 100644 --- a/arch/sandbox/cpu/start.c +++ b/arch/sandbox/cpu/start.c @@ -272,17 +272,9 @@ SANDBOX_CMDLINE_OPT_SHORT(program, 'p', 1, "U-Boot program name"); static int sandbox_cmdline_cb_memory(struct sandbox_state *state, const char *arg) { - int err; - /* For now assume we always want to write it */ state->write_ram_buf = true; state->ram_buf_fname = arg; - - err = os_read_ram_buf(arg); - if (err) { - printf("Failed to read RAM buffer '%s': %d\n", arg, err); - return err; - } state->ram_buf_read = true; return 0; @@ -512,6 +504,17 @@ int sandbox_main(int argc, char *argv[]) if (os_parse_args(state, argc, argv)) return 1; + if (state->ram_buf_fname) { + ret = os_read_ram_buf(state->ram_buf_fname); + if (ret) { + printf("Failed to read RAM buffer '%s': %d\n", + state->ram_buf_fname, ret); + } else { + state->ram_buf_read = true; + log_debug("Read RAM buffer from '%s'\n", state->ram_buf_fname); + } + } + /* Remove old memory file if required */ if (state->ram_buf_rm && state->ram_buf_fname) { os_unlink(state->ram_buf_fname); @@ -519,9 +522,11 @@ int sandbox_main(int argc, char *argv[]) state->ram_buf_fname = NULL; } - ret = sandbox_read_state(state, state->state_fname); - if (ret) - goto err; + if (state->read_state && state->state_fname) { + ret = sandbox_read_state(state, state->state_fname); + if (ret) + goto err; + } if (state->handle_signals) { ret = os_setup_signal_handlers(); @@ -529,7 +534,7 @@ int sandbox_main(int argc, char *argv[]) goto err; } -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) gd->malloc_base = CFG_MALLOC_F_ADDR; #endif #if CONFIG_IS_ENABLED(LOG) diff --git a/arch/sandbox/cpu/state.c b/arch/sandbox/cpu/state.c index d67834988f..e38bb248b7 100644 --- a/arch/sandbox/cpu/state.c +++ b/arch/sandbox/cpu/state.c @@ -513,6 +513,7 @@ int state_uninit(void) printf("Failed to write RAM buffer\n"); return err; } + log_debug("Wrote RAM to file '%s'\n", state->ram_buf_fname); } if (state->write_state) { @@ -520,6 +521,7 @@ int state_uninit(void) printf("Failed to write sandbox state\n"); return -1; } + log_debug("Wrote state to file '%s'\n", state->ram_buf_fname); } /* Delete this at the last moment so as not to upset gdb too much */ diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 962b9ebcbf..6abce9e396 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -1123,8 +1123,8 @@ pci@1,0 { compatible = "pci-generic"; /* reg 0 is at 0x14, using FDT_PCI_SPACE_MEM32 */ - reg = <0x02000814 0 0 0 0 - 0x01000810 0 0 0 0>; + reg = <0x02000814 0 0 0x80 0 + 0x01000810 0 0 0xc0 0>; sandbox,emul = <&swap_case_emul0_1>; }; p2sb-pci@2,0 { @@ -1151,7 +1151,7 @@ pci@1f,0 { compatible = "pci-generic"; /* reg 0 is at 0x10, using FDT_PCI_SPACE_IO */ - reg = <0x0100f810 0 0 0 0>; + reg = <0x0100f810 0 0 0x100 0>; sandbox,emul = <&swap_case_emul0_1f>; }; }; diff --git a/arch/sh/lib/start.S b/arch/sh/lib/start.S index ddb9aa9f87..f0e1c805b0 100644 --- a/arch/sh/lib/start.S +++ b/arch/sh/lib/start.S @@ -53,7 +53,7 @@ _start: mov.l ._gd_init, r13 /* global data */ mov.l ._stack_init, r15 /* stack */ -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) mov.l ._gd_malloc_base, r14 mov.l r15, @r14 #endif @@ -73,7 +73,7 @@ loop: ._bss_start: .long bss_start ._bss_end: .long bss_end ._gd_init: .long (_start - GENERATED_GBL_DATA_SIZE) -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) ._gd_malloc_base: .long (_start - GENERATED_GBL_DATA_SIZE + GD_MALLOC_BASE) #endif ._stack_init: .long (_start - GENERATED_GBL_DATA_SIZE - CONFIG_SYS_MALLOC_LEN - 16) diff --git a/boot/bootm.c b/boot/bootm.c index b1c3afe0a3..8f96a80d42 100644 --- a/boot/bootm.c +++ b/boot/bootm.c @@ -8,6 +8,7 @@ #include <common.h> #include <bootstage.h> #include <cli.h> +#include <command.h> #include <cpu_func.h> #include <env.h> #include <errno.h> @@ -29,7 +30,6 @@ #include "mkimage.h" #endif -#include <command.h> #include <bootm.h> #include <image.h> diff --git a/boot/vbe_request.c b/boot/vbe_request.c index 2f218d4bf9..917251afa1 100644 --- a/boot/vbe_request.c +++ b/boot/vbe_request.c @@ -187,7 +187,7 @@ static int bootmeth_vbe_ft_fixup(void *ctx, struct event *event) ret = ofnode_add_subnode(dest_parent, name, &dest); if (ret && ret != -EEXIST) return log_msg_ret("add", ret); - ret = ofnode_copy_props(node, dest); + ret = ofnode_copy_props(dest, node); if (ret) return log_msg_ret("cp", ret); diff --git a/boot/vbe_simple_os.c b/boot/vbe_simple_os.c index 3285e438a5..84626cdeaf 100644 --- a/boot/vbe_simple_os.c +++ b/boot/vbe_simple_os.c @@ -94,7 +94,7 @@ static int bootmeth_vbe_simple_ft_fixup(void *ctx, struct event *event) /* Copy over the vbe properties for fwupd */ log_debug("Fixing up: %s\n", dev->name); - ret = ofnode_copy_props(dev_ofnode(dev), subnode); + ret = ofnode_copy_props(subnode, dev_ofnode(dev)); if (ret) return log_msg_ret("cp", ret); diff --git a/common/Kconfig b/common/Kconfig index 21eaa5e815..5e79b54221 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -1012,7 +1012,7 @@ endchoice config BLOBLIST_ADDR hex "Address of bloblist" - default 0xc000 if SANDBOX + default 0xb000 if SANDBOX depends on BLOBLIST_FIXED help Sets the address of the bloblist, set up by the first part of U-Boot diff --git a/common/Makefile b/common/Makefile index 5c1617206f..cdeadf7202 100644 --- a/common/Makefile +++ b/common/Makefile @@ -74,11 +74,7 @@ endif # CONFIG_SPL_BUILD obj-$(CONFIG_CROS_EC) += cros_ec.o obj-y += dlmalloc.o -ifdef CONFIG_SYS_MALLOC_F -ifneq ($(CONFIG_$(SPL_TPL_)SYS_MALLOC_F_LEN),0x0) -obj-y += malloc_simple.o -endif -endif +obj-$(CONFIG_$(SPL_TPL_)SYS_MALLOC_F) += malloc_simple.o obj-$(CONFIG_CYCLIC) += cyclic.o obj-$(CONFIG_$(SPL_TPL_)EVENT) += event.o diff --git a/common/bloblist.c b/common/bloblist.c index 2144b10e1d..a22f6c12b0 100644 --- a/common/bloblist.c +++ b/common/bloblist.c @@ -51,6 +51,7 @@ static struct tag_name { /* BLOBLISTT_PROJECT_AREA */ { BLOBLISTT_U_BOOT_SPL_HANDOFF, "SPL hand-off" }, + { BLOBLISTT_VBE, "VBE" }, { BLOBLISTT_U_BOOT_VIDEO, "SPL video handoff" }, /* BLOBLISTT_VENDOR_AREA */ @@ -476,6 +477,17 @@ int bloblist_init(void) log_debug("Found existing bloblist size %lx at %lx\n", size, addr); } + if (ret) + return log_msg_ret("ini", ret); + gd->flags |= GD_FLG_BLOBLIST_READY; + + return 0; +} - return ret; +int bloblist_maybe_init(void) +{ + if (CONFIG_IS_ENABLED(BLOBLIST) && !(gd->flags & GD_FLG_BLOBLIST_READY)) + return bloblist_init(); + + return 0; } diff --git a/common/board_f.c b/common/board_f.c index aef395b135..d4d7d01f8f 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -794,7 +794,7 @@ static int initf_bootstage(void) static int initf_dm(void) { -#if defined(CONFIG_DM) && CONFIG_VAL(SYS_MALLOC_F_LEN) +#if defined(CONFIG_DM) && CONFIG_IS_ENABLED(SYS_MALLOC_F) int ret; bootstage_start(BOOTSTAGE_ID_ACCUM_DM_F, "dm_f"); @@ -841,9 +841,7 @@ static const init_fnc_t init_sequence_f[] = { log_init, initf_bootstage, /* uses its own timer, so does not need DM */ event_init, -#ifdef CONFIG_BLOBLIST - bloblist_init, -#endif + bloblist_maybe_init, setup_spl_handoff, #if defined(CONFIG_CONSOLE_RECORD_INIT_F) console_record_init, diff --git a/common/board_r.c b/common/board_r.c index e30963339c..52786901be 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -191,7 +191,7 @@ static int initr_malloc(void) { ulong start; -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) debug("Pre-reloc malloc() used %#lx bytes (%ld KB)\n", gd->malloc_ptr, gd->malloc_ptr / 1024); #endif diff --git a/common/bootstage.c b/common/bootstage.c index 326c40f156..a68d883c68 100644 --- a/common/bootstage.c +++ b/common/bootstage.c @@ -502,6 +502,20 @@ int bootstage_unstash(const void *base, int size) return 0; } +int _bootstage_stash_default(void) +{ + return bootstage_stash(map_sysmem(CONFIG_BOOTSTAGE_STASH_ADDR, 0), + CONFIG_BOOTSTAGE_STASH_SIZE); +} + +int _bootstage_unstash_default(void) +{ + const void *stash = map_sysmem(CONFIG_BOOTSTAGE_STASH_ADDR, + CONFIG_BOOTSTAGE_STASH_SIZE); + + return bootstage_unstash(stash, CONFIG_BOOTSTAGE_STASH_SIZE); +} + int bootstage_get_size(void) { struct bootstage_data *data = gd->bootstage; diff --git a/common/dlmalloc.c b/common/dlmalloc.c index aa933bdf57..87a09d38fb 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1291,7 +1291,7 @@ Void_t* mALLOc(bytes) size_t bytes; INTERNAL_SIZE_T nb; -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) return malloc_simple(bytes); #endif @@ -1572,7 +1572,7 @@ void fREe(mem) Void_t* mem; mchunkptr fwd; /* misc temp for linking */ int islr; /* track whether merging with last_remainder */ -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) /* free() is a no-op - all the memory will be freed on relocation */ if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { VALGRIND_FREELIKE_BLOCK(mem, SIZE_SZ); @@ -1735,7 +1735,7 @@ Void_t* rEALLOc(oldmem, bytes) Void_t* oldmem; size_t bytes; /* realloc of null is supposed to be same as malloc */ if (oldmem == NULL) return mALLOc(bytes); -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { /* This is harder to support and should not be needed */ panic("pre-reloc realloc() is not supported"); @@ -1957,7 +1957,7 @@ Void_t* mEMALIGn(alignment, bytes) size_t alignment; size_t bytes; if ((long)bytes < 0) return NULL; -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { return memalign_simple(alignment, bytes); } @@ -2153,7 +2153,7 @@ Void_t* cALLOc(n, elem_size) size_t n; size_t elem_size; return NULL; else { -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) if (!(gd->flags & GD_FLG_FULL_MALLOC_INIT)) { memset(mem, 0, sz); return mem; @@ -2455,7 +2455,7 @@ int mALLOPt(param_number, value) int param_number; int value; int initf_malloc(void) { -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) assert(gd->malloc_base); /* Set up by crt0.S */ gd->malloc_limit = CONFIG_VAL(SYS_MALLOC_F_LEN); gd->malloc_ptr = 0; diff --git a/common/init/board_init.c b/common/init/board_init.c index ab8c508ad8..ed2365daa3 100644 --- a/common/init/board_init.c +++ b/common/init/board_init.c @@ -79,7 +79,7 @@ ulong board_init_f_alloc_reserve(ulong top) { /* Reserve early malloc arena */ #ifndef CFG_MALLOC_F_ADDR -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) top -= CONFIG_VAL(SYS_MALLOC_F_LEN); #endif #endif @@ -159,7 +159,7 @@ void board_init_f_init_reserve(ulong base) * Use gd as it is now properly set for all architectures. */ -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) /* go down one 'early malloc arena' */ gd->malloc_base = base; #if CONFIG_IS_ENABLED(ZERO_MEM_BEFORE_USE) diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 1c2fe78e3e..4632359794 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -402,21 +402,21 @@ config SPL_SEPARATE_BSS location is used. Normally we put the device tree at the end of BSS but with this option enabled, it goes at _image_binary_end. -config SYS_SPL_MALLOC +config SPL_SYS_MALLOC bool "Enable malloc pool in SPL" depends on SPL_FRAMEWORK -config HAS_CUSTOM_SPL_MALLOC_START +config SPL_HAS_CUSTOM_MALLOC_START bool "For the SPL malloc pool, define a custom starting address" - depends on SYS_SPL_MALLOC + depends on SPL_SYS_MALLOC -config CUSTOM_SYS_SPL_MALLOC_ADDR +config SPL_CUSTOM_SYS_MALLOC_ADDR hex "SPL malloc addr" - depends on HAS_CUSTOM_SPL_MALLOC_START + depends on SPL_HAS_CUSTOM_MALLOC_START -config SYS_SPL_MALLOC_SIZE +config SPL_SYS_MALLOC_SIZE hex "Size of the SPL malloc pool" - depends on SYS_SPL_MALLOC + depends on SPL_SYS_MALLOC default 0x100000 config SPL_READ_ONLY @@ -1063,7 +1063,7 @@ config SPL_OS_BOOT Enable booting directly to an OS from SPL. for more info read doc/README.falcon -config SYS_SPL_ARGS_ADDR +config SPL_PAYLOAD_ARGS_ADDR hex "Address in memory to load 'args' file for Falcon Mode to" depends on SPL_OS_BOOT default 0x88000000 if ARCH_OMAP2PLUS diff --git a/common/spl/Kconfig.nxp b/common/spl/Kconfig.nxp index fc696cf0ce..53e9b9f8d3 100644 --- a/common/spl/Kconfig.nxp +++ b/common/spl/Kconfig.nxp @@ -59,7 +59,7 @@ config SPL_RELOC_TEXT_BASE config SPL_RELOC_STACK hex "Address of the start of the stack SPL will use after relocation." help - If unspecified, this is equal to CFG_SYS_SPL_MALLOC_START. Starting + If unspecified, this is equal to CFG_SPL_SYS_MALLOC_START. Starting address of the malloc pool used in SPL. When this option is set the full malloc is used in SPL and it is set up by spl_init() and before that, the simple malloc() can be used if CONFIG_SYS_MALLOC_F is defined. diff --git a/common/spl/spl.c b/common/spl/spl.c index cd294e81b2..0cf887fd62 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -256,102 +256,6 @@ void spl_set_header_raw_uboot(struct spl_image_info *spl_image) } #endif -#if CONFIG_IS_ENABLED(LOAD_FIT_FULL) -/* Parse and load full fitImage in SPL */ -static int spl_load_fit_image(struct spl_image_info *spl_image, - const struct legacy_img_hdr *header) -{ - struct bootm_headers images; - const char *fit_uname_config = NULL; - uintptr_t fdt_hack; - const char *uname; - ulong fw_data = 0, dt_data = 0, img_data = 0; - ulong fw_len = 0, dt_len = 0, img_len = 0; - int idx, conf_noffset; - int ret; - -#ifdef CONFIG_SPL_FIT_SIGNATURE - images.verify = 1; -#endif - ret = fit_image_load(&images, (ulong)header, - NULL, &fit_uname_config, - IH_ARCH_DEFAULT, IH_TYPE_STANDALONE, -1, - FIT_LOAD_OPTIONAL, &fw_data, &fw_len); - if (ret >= 0) { - printf("DEPRECATED: 'standalone = ' property."); - printf("Please use either 'firmware =' or 'kernel ='\n"); - } else { - ret = fit_image_load(&images, (ulong)header, NULL, - &fit_uname_config, IH_ARCH_DEFAULT, - IH_TYPE_FIRMWARE, -1, FIT_LOAD_OPTIONAL, - &fw_data, &fw_len); - } - - if (ret < 0) { - ret = fit_image_load(&images, (ulong)header, NULL, - &fit_uname_config, IH_ARCH_DEFAULT, - IH_TYPE_KERNEL, -1, FIT_LOAD_OPTIONAL, - &fw_data, &fw_len); - } - - if (ret < 0) - return ret; - - spl_image->size = fw_len; - spl_image->entry_point = fw_data; - spl_image->load_addr = fw_data; - if (fit_image_get_os(header, ret, &spl_image->os)) - spl_image->os = IH_OS_INVALID; - spl_image->name = genimg_get_os_name(spl_image->os); - - debug(SPL_TPL_PROMPT "payload image: %32s load addr: 0x%lx size: %d\n", - spl_image->name, spl_image->load_addr, spl_image->size); - -#ifdef CONFIG_SPL_FIT_SIGNATURE - images.verify = 1; -#endif - ret = fit_image_load(&images, (ulong)header, NULL, &fit_uname_config, - IH_ARCH_DEFAULT, IH_TYPE_FLATDT, -1, - FIT_LOAD_OPTIONAL, &dt_data, &dt_len); - if (ret >= 0) { - spl_image->fdt_addr = (void *)dt_data; - - if (spl_image->os == IH_OS_U_BOOT) { - /* HACK: U-Boot expects FDT at a specific address */ - fdt_hack = spl_image->load_addr + spl_image->size; - fdt_hack = (fdt_hack + 3) & ~3; - debug("Relocating FDT to %p\n", spl_image->fdt_addr); - memcpy((void *)fdt_hack, spl_image->fdt_addr, dt_len); - } - } - - conf_noffset = fit_conf_get_node((const void *)header, - fit_uname_config); - if (conf_noffset < 0) - return 0; - - for (idx = 0; - uname = fdt_stringlist_get((const void *)header, conf_noffset, - FIT_LOADABLE_PROP, idx, - NULL), uname; - idx++) - { -#ifdef CONFIG_SPL_FIT_SIGNATURE - images.verify = 1; -#endif - ret = fit_image_load(&images, (ulong)header, - &uname, &fit_uname_config, - IH_ARCH_DEFAULT, IH_TYPE_LOADABLE, -1, - FIT_LOAD_OPTIONAL_NON_ZERO, - &img_data, &img_len); - if (ret < 0) - return ret; - } - - return 0; -} -#endif - __weak int spl_parse_board_header(struct spl_image_info *spl_image, const struct spl_boot_device *bootdev, const void *image_header, size_t size) @@ -371,12 +275,14 @@ int spl_parse_image_header(struct spl_image_info *spl_image, const struct spl_boot_device *bootdev, const struct legacy_img_hdr *header) { -#if CONFIG_IS_ENABLED(LOAD_FIT_FULL) - int ret = spl_load_fit_image(spl_image, header); + int ret; - if (!ret) - return ret; -#endif + if (CONFIG_IS_ENABLED(LOAD_FIT_FULL)) { + ret = spl_load_fit_image(spl_image, header); + + if (!ret) + return ret; + } if (image_get_magic(header) == IH_MAGIC) { int ret; @@ -523,7 +429,7 @@ static int spl_common_init(bool setup_malloc) { int ret; -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) if (setup_malloc) { #ifdef CFG_MALLOC_F_ADDR gd->malloc_base = CFG_MALLOC_F_ADDR; @@ -538,17 +444,11 @@ static int spl_common_init(bool setup_malloc) ret); return ret; } -#ifdef CONFIG_BOOTSTAGE_STASH if (!u_boot_first_phase()) { - const void *stash = map_sysmem(CONFIG_BOOTSTAGE_STASH_ADDR, - CONFIG_BOOTSTAGE_STASH_SIZE); - - ret = bootstage_unstash(stash, CONFIG_BOOTSTAGE_STASH_SIZE); + ret = bootstage_unstash_default(); if (ret) - debug("%s: Failed to unstash bootstage: ret=%d\n", - __func__, ret); + log_debug("Failed to unstash bootstage: ret=%d\n", ret); } -#endif /* CONFIG_BOOTSTAGE_STASH */ bootstage_mark_name(get_bootstage_id(true), spl_phase_name(spl_phase())); #if CONFIG_IS_ENABLED(LOG) @@ -744,27 +644,21 @@ void board_init_r(gd_t *dummy1, ulong dummy2) BOOT_DEVICE_NONE, }; struct spl_image_info spl_image; - int ret; + int ret, os; debug(">>" SPL_TPL_PROMPT "board_init_r()\n"); spl_set_bd(); -#if defined(CONFIG_SYS_SPL_MALLOC) - mem_malloc_init(SYS_SPL_MALLOC_START, CONFIG_SYS_SPL_MALLOC_SIZE); - gd->flags |= GD_FLG_FULL_MALLOC_INIT; -#endif + if (IS_ENABLED(CONFIG_SPL_SYS_MALLOC)) { + mem_malloc_init(SPL_SYS_MALLOC_START, SPL_SYS_MALLOC_SIZE); + gd->flags |= GD_FLG_FULL_MALLOC_INIT; + } if (!(gd->flags & GD_FLG_SPL_INIT)) { if (spl_init()) hang(); } -#if !defined(CONFIG_PPC) && !defined(CONFIG_ARCH_MX6) - /* - * timer_init() does not exist on PPC systems. The timer is initialized - * and enabled (decrementer) in interrupt_init() here. - */ timer_init(); -#endif if (CONFIG_IS_ENABLED(BLOBLIST)) { ret = bloblist_init(); if (ret) { @@ -784,13 +678,11 @@ void board_init_r(gd_t *dummy1, ulong dummy2) } } -#if CONFIG_IS_ENABLED(BOARD_INIT) - spl_board_init(); -#endif + if (CONFIG_IS_ENABLED(BOARD_INIT)) + spl_board_init(); -#if defined(CONFIG_SPL_WATCHDOG) && CONFIG_IS_ENABLED(WDT) - initr_watchdog(); -#endif + if (IS_ENABLED(CONFIG_SPL_WATCHDOG) && CONFIG_IS_ENABLED(WDT)) + initr_watchdog(); if (IS_ENABLED(CONFIG_SPL_OS_BOOT) || CONFIG_IS_ENABLED(HANDOFF) || IS_ENABLED(CONFIG_SPL_ATF)) @@ -814,9 +706,8 @@ void board_init_r(gd_t *dummy1, ulong dummy2) } memset(&spl_image, '\0', sizeof(spl_image)); -#ifdef CONFIG_SYS_SPL_ARGS_ADDR - spl_image.arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; -#endif + if (IS_ENABLED(CONFIG_SPL_OS_BOOT)) + spl_image.arg = (void *)SPL_PAYLOAD_ARGS_ADDR; spl_image.boot_device = BOOT_DEVICE_NONE; board_boot_order(spl_boot_list); @@ -833,66 +724,39 @@ void board_init_r(gd_t *dummy1, ulong dummy2) } spl_perform_fixups(&spl_image); - if (CONFIG_IS_ENABLED(HANDOFF)) { - ret = write_spl_handoff(); - if (ret) - printf(SPL_TPL_PROMPT - "SPL hand-off write failed (err=%d)\n", ret); - } - if (CONFIG_IS_ENABLED(BLOBLIST)) { - ret = bloblist_finish(); - if (ret) - printf("Warning: Failed to finish bloblist (ret=%d)\n", - ret); - } - switch (spl_image.os) { - case IH_OS_U_BOOT: + os = spl_image.os; + if (os == IH_OS_U_BOOT) { debug("Jumping to %s...\n", spl_phase_name(spl_next_phase())); - break; -#if CONFIG_IS_ENABLED(ATF) - case IH_OS_ARM_TRUSTED_FIRMWARE: + } else if (CONFIG_IS_ENABLED(ATF) && os == IH_OS_ARM_TRUSTED_FIRMWARE) { debug("Jumping to U-Boot via ARM Trusted Firmware\n"); - spl_fixup_fdt(spl_image.fdt_addr); + spl_fixup_fdt(spl_image_fdt_addr(&spl_image)); spl_invoke_atf(&spl_image); - break; -#endif -#if CONFIG_IS_ENABLED(OPTEE_IMAGE) - case IH_OS_TEE: + } else if (CONFIG_IS_ENABLED(OPTEE_IMAGE) && os == IH_OS_TEE) { debug("Jumping to U-Boot via OP-TEE\n"); - spl_board_prepare_for_optee(spl_image.fdt_addr); + spl_board_prepare_for_optee(spl_image_fdt_addr(&spl_image)); jump_to_image_optee(&spl_image); - break; -#endif -#if CONFIG_IS_ENABLED(OPENSBI) - case IH_OS_OPENSBI: + } else if (CONFIG_IS_ENABLED(OPENSBI) && os == IH_OS_OPENSBI) { debug("Jumping to U-Boot via RISC-V OpenSBI\n"); spl_invoke_opensbi(&spl_image); - break; -#endif -#if CONFIG_IS_ENABLED(OS_BOOT) - case IH_OS_LINUX: + } else if (CONFIG_IS_ENABLED(OS_BOOT) && os == IH_OS_LINUX) { debug("Jumping to Linux\n"); -#if defined(CONFIG_SYS_SPL_ARGS_ADDR) - spl_fixup_fdt((void *)CONFIG_SYS_SPL_ARGS_ADDR); -#endif + if (IS_ENABLED(CONFIG_SPL_OS_BOOT)) + spl_fixup_fdt((void *)SPL_PAYLOAD_ARGS_ADDR); spl_board_prepare_for_linux(); jump_to_image_linux(&spl_image); -#endif - default: + } else { debug("Unsupported OS image.. Jumping nevertheless..\n"); } -#if CONFIG_VAL(SYS_MALLOC_F_LEN) && !defined(CONFIG_SYS_SPL_MALLOC_SIZE) - debug("SPL malloc() used 0x%lx bytes (%ld KB)\n", gd->malloc_ptr, - gd->malloc_ptr / 1024); -#endif + if (CONFIG_IS_ENABLED(SYS_MALLOC_F) && + !IS_ENABLED(CONFIG_SPL_SYS_MALLOC_SIZE)) + debug("SPL malloc() used 0x%lx bytes (%ld KB)\n", + gd_malloc_ptr(), gd_malloc_ptr() / 1024); + bootstage_mark_name(get_bootstage_id(false), "end phase"); -#ifdef CONFIG_BOOTSTAGE_STASH - ret = bootstage_stash((void *)CONFIG_BOOTSTAGE_STASH_ADDR, - CONFIG_BOOTSTAGE_STASH_SIZE); + ret = bootstage_stash_default(); if (ret) debug("Failed to stash bootstage: err=%d\n", ret); -#endif if (IS_ENABLED(CONFIG_SPL_VIDEO_REMOVE)) { struct udevice *dev; @@ -906,6 +770,18 @@ void board_init_r(gd_t *dummy1, ulong dummy2) dev->name, rc); } } + if (CONFIG_IS_ENABLED(HANDOFF)) { + ret = write_spl_handoff(); + if (ret) + printf(SPL_TPL_PROMPT + "SPL hand-off write failed (err=%d)\n", ret); + } + if (CONFIG_IS_ENABLED(BLOBLIST)) { + ret = bloblist_finish(); + if (ret) + printf("Warning: Failed to finish bloblist (ret=%d)\n", + ret); + } spl_board_prepare_for_boot(); jump_to_image_no_args(&spl_image); @@ -983,7 +859,7 @@ ulong spl_relocate_stack_gd(void) if (CONFIG_IS_ENABLED(SYS_REPORT_STACK_F_USAGE)) spl_relocate_stack_check(); -#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_VAL(SYS_MALLOC_F_LEN) +#if defined(CONFIG_SPL_SYS_MALLOC_SIMPLE) && CONFIG_IS_ENABLED(SYS_MALLOC_F) if (CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN) { debug("SPL malloc() before relocation used 0x%lx bytes (%ld KB)\n", gd->malloc_ptr, gd->malloc_ptr / 1024); diff --git a/common/spl/spl_ext.c b/common/spl/spl_ext.c index 2bf3434439..902564a607 100644 --- a/common/spl/spl_ext.c +++ b/common/spl/spl_ext.c @@ -97,7 +97,7 @@ int spl_load_image_ext_os(struct spl_image_info *spl_image, puts("spl: ext4fs_open failed\n"); goto defaults; } - err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, filelen, &actlen); + err = ext4fs_read((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0, filelen, &actlen); if (err < 0) { printf("spl: error reading image %s, err - %d, falling back to default\n", file, err); @@ -127,7 +127,7 @@ defaults: if (err < 0) puts("spl: ext4fs_open failed\n"); - err = ext4fs_read((void *)CONFIG_SYS_SPL_ARGS_ADDR, 0, filelen, &actlen); + err = ext4fs_read((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0, filelen, &actlen); if (err < 0) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("%s: error reading image %s, err - %d\n", diff --git a/common/spl/spl_fat.c b/common/spl/spl_fat.c index f8a5b80a3b..c6e2526ade 100644 --- a/common/spl/spl_fat.c +++ b/common/spl/spl_fat.c @@ -128,7 +128,7 @@ int spl_load_image_fat_os(struct spl_image_info *spl_image, #if defined(CONFIG_SPL_ENV_SUPPORT) && defined(CONFIG_SPL_OS_BOOT) file = env_get("falcon_args_file"); if (file) { - err = file_fat_read(file, (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); + err = file_fat_read(file, (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0); if (err <= 0) { printf("spl: error reading image %s, err - %d, falling back to default\n", file, err); @@ -153,7 +153,7 @@ defaults: #endif err = file_fat_read(CONFIG_SPL_FS_LOAD_ARGS_NAME, - (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0); + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, 0); if (err <= 0) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT printf("%s: error reading image %s, err - %d\n", diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c index b1668c0396..93480a5a60 100644 --- a/common/spl/spl_fit.c +++ b/common/spl/spl_fit.c @@ -44,7 +44,7 @@ static int find_node_from_desc(const void *fit, int node, const char *str) for (child = fdt_first_subnode(fit, node); child >= 0; child = fdt_next_subnode(fit, child)) { int len; - const char *desc = fdt_getprop(fit, child, "description", &len); + const char *desc = fdt_getprop(fit, child, FIT_DESC_PROP, &len); if (!desc) continue; @@ -208,7 +208,7 @@ static int get_aligned_image_size(struct spl_load_info *info, int data_size, } /** - * spl_load_fit_image(): load the image described in a certain FIT node + * load_simple_fit(): load the image described in a certain FIT node * @info: points to information about the device to load data from * @sector: the start sector of the FIT image on the device * @ctx: points to the FIT context structure @@ -221,9 +221,9 @@ static int get_aligned_image_size(struct spl_load_info *info, int data_size, * * Return: 0 on success or a negative error number. */ -static int spl_load_fit_image(struct spl_load_info *info, ulong sector, - const struct spl_fit_info *ctx, int node, - struct spl_image_info *image_info) +static int load_simple_fit(struct spl_load_info *info, ulong sector, + const struct spl_fit_info *ctx, int node, + struct spl_image_info *image_info) { int offset; size_t length; @@ -386,8 +386,7 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, else return node; } else { - ret = spl_load_fit_image(info, sector, ctx, node, - &image_info); + ret = load_simple_fit(info, sector, ctx, node, &image_info); if (ret < 0) return ret; } @@ -426,8 +425,8 @@ static int spl_fit_append_fdt(struct spl_image_info *spl_image, __func__); } image_info.load_addr = (ulong)tmpbuffer; - ret = spl_load_fit_image(info, sector, ctx, - node, &image_info); + ret = load_simple_fit(info, sector, ctx, node, + &image_info); if (ret < 0) break; @@ -477,10 +476,11 @@ static int spl_fit_record_loadable(const struct spl_fit_info *ctx, int index, node = spl_fit_get_image_node(ctx, "loadables", index); ret = fdt_record_loadable(blob, index, name, image->load_addr, - image->size, image->entry_point, - fdt_getprop(ctx->fit, node, "type", NULL), - fdt_getprop(ctx->fit, node, "os", NULL), - fdt_getprop(ctx->fit, node, "arch", NULL)); + image->size, image->entry_point, + fdt_getprop(ctx->fit, node, FIT_TYPE_PROP, NULL), + fdt_getprop(ctx->fit, node, FIT_OS_PROP, NULL), + fdt_getprop(ctx->fit, node, FIT_ARCH_PROP, NULL)); + return ret; } @@ -531,7 +531,7 @@ static void *spl_get_fit_load_buffer(size_t size) buf = malloc_cache_aligned(size); if (!buf) { pr_err("Could not get FIT buffer of %lu bytes\n", (ulong)size); - pr_err("\tcheck CONFIG_SYS_SPL_MALLOC_SIZE\n"); + pr_err("\tcheck CONFIG_SPL_SYS_MALLOC_SIZE\n"); buf = spl_get_load_buffer(0, size); } return buf; @@ -617,7 +617,7 @@ static int spl_fit_load_fpga(struct spl_fit_info *ctx, warn_deprecated("'fpga' property in config node. Use 'loadables'"); /* Load the image and set up the fpga_image structure */ - ret = spl_load_fit_image(info, sector, ctx, node, &fpga_image); + ret = load_simple_fit(info, sector, ctx, node, &fpga_image); if (ret) { printf("%s: Cannot load the FPGA: %i\n", __func__, ret); return ret; @@ -742,7 +742,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, } /* Load the image and set up the spl_image structure */ - ret = spl_load_fit_image(info, sector, &ctx, node, spl_image); + ret = load_simple_fit(info, sector, &ctx, node, spl_image); if (ret) return ret; @@ -783,7 +783,7 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, continue; image_info.load_addr = 0; - ret = spl_load_fit_image(info, sector, &ctx, node, &image_info); + ret = load_simple_fit(info, sector, &ctx, node, &image_info); if (ret < 0) { printf("%s: can't load image loadables index %d (ret = %d)\n", __func__, index, ret); @@ -828,3 +828,96 @@ int spl_load_simple_fit(struct spl_image_info *spl_image, return 0; } + +/* Parse and load full fitImage in SPL */ +int spl_load_fit_image(struct spl_image_info *spl_image, + const struct legacy_img_hdr *header) +{ + struct bootm_headers images; + const char *fit_uname_config = NULL; + uintptr_t fdt_hack; + const char *uname; + ulong fw_data = 0, dt_data = 0, img_data = 0; + ulong fw_len = 0, dt_len = 0, img_len = 0; + int idx, conf_noffset; + int ret; + +#ifdef CONFIG_SPL_FIT_SIGNATURE + images.verify = 1; +#endif + ret = fit_image_load(&images, (ulong)header, + NULL, &fit_uname_config, + IH_ARCH_DEFAULT, IH_TYPE_STANDALONE, -1, + FIT_LOAD_OPTIONAL, &fw_data, &fw_len); + if (ret >= 0) { + printf("DEPRECATED: 'standalone = ' property."); + printf("Please use either 'firmware =' or 'kernel ='\n"); + } else { + ret = fit_image_load(&images, (ulong)header, NULL, + &fit_uname_config, IH_ARCH_DEFAULT, + IH_TYPE_FIRMWARE, -1, FIT_LOAD_OPTIONAL, + &fw_data, &fw_len); + } + + if (ret < 0) { + ret = fit_image_load(&images, (ulong)header, NULL, + &fit_uname_config, IH_ARCH_DEFAULT, + IH_TYPE_KERNEL, -1, FIT_LOAD_OPTIONAL, + &fw_data, &fw_len); + } + + if (ret < 0) + return ret; + + spl_image->size = fw_len; + spl_image->entry_point = fw_data; + spl_image->load_addr = fw_data; + if (fit_image_get_os(header, ret, &spl_image->os)) + spl_image->os = IH_OS_INVALID; + spl_image->name = genimg_get_os_name(spl_image->os); + + debug(SPL_TPL_PROMPT "payload image: %32s load addr: 0x%lx size: %d\n", + spl_image->name, spl_image->load_addr, spl_image->size); + +#ifdef CONFIG_SPL_FIT_SIGNATURE + images.verify = 1; +#endif + ret = fit_image_load(&images, (ulong)header, NULL, &fit_uname_config, + IH_ARCH_DEFAULT, IH_TYPE_FLATDT, -1, + FIT_LOAD_OPTIONAL, &dt_data, &dt_len); + if (ret >= 0) { + spl_image->fdt_addr = (void *)dt_data; + + if (spl_image->os == IH_OS_U_BOOT) { + /* HACK: U-Boot expects FDT at a specific address */ + fdt_hack = spl_image->load_addr + spl_image->size; + fdt_hack = (fdt_hack + 3) & ~3; + debug("Relocating FDT to %p\n", spl_image->fdt_addr); + memcpy((void *)fdt_hack, spl_image->fdt_addr, dt_len); + } + } + + conf_noffset = fit_conf_get_node((const void *)header, + fit_uname_config); + if (conf_noffset < 0) + return 0; + + for (idx = 0; + uname = fdt_stringlist_get((const void *)header, conf_noffset, + FIT_LOADABLE_PROP, idx, + NULL), uname; + idx++) { +#ifdef CONFIG_SPL_FIT_SIGNATURE + images.verify = 1; +#endif + ret = fit_image_load(&images, (ulong)header, + &uname, &fit_uname_config, + IH_ARCH_DEFAULT, IH_TYPE_LOADABLE, -1, + FIT_LOAD_OPTIONAL_NON_ZERO, + &img_data, &img_len); + if (ret < 0) + return ret; + } + + return 0; +} diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c index 20f687e138..0ab85d2168 100644 --- a/common/spl/spl_mmc.c +++ b/common/spl/spl_mmc.c @@ -235,7 +235,7 @@ static int mmc_load_image_raw_os(struct spl_image_info *spl_image, count = blk_dread(mmc_get_blk_desc(mmc), CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR, CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS, - (void *) CONFIG_SYS_SPL_ARGS_ADDR); + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR); if (count != CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS) { #ifdef CONFIG_SPL_LIBCOMMON_SUPPORT puts("mmc_load_image_raw_os: mmc block read error\n"); diff --git a/common/spl/spl_nand.c b/common/spl/spl_nand.c index dc45204fc0..6cc34004f4 100644 --- a/common/spl/spl_nand.c +++ b/common/spl/spl_nand.c @@ -159,11 +159,11 @@ static int spl_nand_load_image(struct spl_image_info *spl_image, CONFIG_CMD_SPL_WRITE_SIZE, (void *)CONFIG_TEXT_BASE); /* copy to destintion */ - for (dst = (int *)CONFIG_SYS_SPL_ARGS_ADDR, - src = (int *)CONFIG_TEXT_BASE; - src < (int *)(CONFIG_TEXT_BASE + - CONFIG_CMD_SPL_WRITE_SIZE); - src++, dst++) { + for (dst = (int *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, + src = (int *)CONFIG_TEXT_BASE; + src < (int *)(CONFIG_TEXT_BASE + + CONFIG_CMD_SPL_WRITE_SIZE); + src++, dst++) { writel(readl(src), dst); } diff --git a/common/spl/spl_nor.c b/common/spl/spl_nor.c index 5b65b96a77..79d4f1d7aa 100644 --- a/common/spl/spl_nor.c +++ b/common/spl/spl_nor.c @@ -54,8 +54,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image, CONFIG_SYS_OS_BASE, (void *)header); -#if defined CONFIG_SYS_SPL_ARGS_ADDR && defined CONFIG_CMD_SPL_NOR_OFS - memcpy((void *)CONFIG_SYS_SPL_ARGS_ADDR, +#if defined CONFIG_SPL_PAYLOAD_ARGS_ADDR && defined CONFIG_CMD_SPL_NOR_OFS + memcpy((void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR, (void *)CONFIG_CMD_SPL_NOR_OFS, CONFIG_CMD_SPL_WRITE_SIZE); #endif @@ -74,8 +74,8 @@ static int spl_nor_load_image(struct spl_image_info *spl_image, (void *)(CONFIG_SYS_OS_BASE + sizeof(struct legacy_img_hdr)), spl_image->size); -#ifdef CONFIG_SYS_SPL_ARGS_ADDR - spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; +#ifdef CONFIG_SPL_PAYLOAD_ARGS_ADDR + spl_image->arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; #endif return 0; diff --git a/common/spl/spl_spi.c b/common/spl/spl_spi.c index 2aff025f76..d69069a75b 100644 --- a/common/spl/spl_spi.c +++ b/common/spl/spl_spi.c @@ -47,7 +47,7 @@ static int spi_load_image_os(struct spl_image_info *spl_image, /* Read device tree. */ spi_flash_read(flash, CFG_SYS_SPI_ARGS_OFFS, CFG_SYS_SPI_ARGS_SIZE, - (void *)CONFIG_SYS_SPL_ARGS_ADDR); + (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR); return 0; } diff --git a/common/spl/spl_ubi.c b/common/spl/spl_ubi.c index bcac25cd02..d7ab9efd11 100644 --- a/common/spl/spl_ubi.c +++ b/common/spl/spl_ubi.c @@ -50,7 +50,7 @@ int spl_ubi_load_image(struct spl_image_info *spl_image, volumes[0].vol_id = CONFIG_SPL_UBI_LOAD_KERNEL_ID; volumes[0].load_addr = (void *)CONFIG_SYS_LOAD_ADDR; volumes[1].vol_id = CONFIG_SPL_UBI_LOAD_ARGS_ID; - volumes[1].load_addr = (void *)CONFIG_SYS_SPL_ARGS_ADDR; + volumes[1].load_addr = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; ret = ubispl_load_volumes(&info, volumes, 2); if (!ret) { diff --git a/common/spl/spl_xip.c b/common/spl/spl_xip.c index 77c23ba059..959915ffa6 100644 --- a/common/spl/spl_xip.c +++ b/common/spl/spl_xip.c @@ -14,7 +14,7 @@ static int spl_xip(struct spl_image_info *spl_image, { #if CONFIG_IS_ENABLED(OS_BOOT) if (!spl_start_uboot()) { - spl_image->arg = (void *)CONFIG_SYS_SPL_ARGS_ADDR; + spl_image->arg = (void *)CONFIG_SPL_PAYLOAD_ARGS_ADDR; spl_image->name = "Linux"; spl_image->os = IH_OS_LINUX; spl_image->load_addr = CONFIG_SYS_LOAD_ADDR; diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig index e41fbfec31..16993ef538 100644 --- a/configs/am335x_baltos_defconfig +++ b/configs/am335x_baltos_defconfig @@ -18,8 +18,8 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run usbboot;run mmcboot;setenv mmcdev 1; setenv bootpart 1:2; run mmcboot;run nandboot;" CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y CONFIG_SPL_MTD_SUPPORT=y diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index e581accc21..531703010a 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -23,8 +23,8 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_MUSB_NEW=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_NET=y diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index d7cf7d7884..f048e60f7f 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -20,8 +20,8 @@ CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_boot CONFIG_LOGLEVEL=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_ETH=y # CONFIG_SPL_FS_EXT4 is not set diff --git a/configs/am335x_evm_spiboot_defconfig b/configs/am335x_evm_spiboot_defconfig index 090aae7e76..9866246aa5 100644 --- a/configs/am335x_evm_spiboot_defconfig +++ b/configs/am335x_evm_spiboot_defconfig @@ -23,8 +23,8 @@ CONFIG_BOOTCOMMAND="run findfdt; run init_console; run finduuid; run distro_boot CONFIG_LOGLEVEL=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig index 7c4085d084..01d848ceed 100644 --- a/configs/am335x_guardian_defconfig +++ b/configs/am335x_guardian_defconfig @@ -31,8 +31,8 @@ CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_ETH=y diff --git a/configs/am335x_hs_evm_defconfig b/configs/am335x_hs_evm_defconfig index 4c36f9ddc9..b961b6c41f 100644 --- a/configs/am335x_hs_evm_defconfig +++ b/configs/am335x_hs_evm_defconfig @@ -21,8 +21,8 @@ CONFIG_LOGLEVEL=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_MAX_SIZE=0xb0b0 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_ENV_SUPPORT is not set # CONFIG_SPL_FS_EXT4 is not set diff --git a/configs/am335x_hs_evm_uart_defconfig b/configs/am335x_hs_evm_uart_defconfig index cc5b45228d..b5d8eac9f3 100644 --- a/configs/am335x_hs_evm_uart_defconfig +++ b/configs/am335x_hs_evm_uart_defconfig @@ -24,8 +24,8 @@ CONFIG_LOGLEVEL=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_MAX_SIZE=0x9ab0 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FIT_IMAGE_TINY=y # CONFIG_SPL_ENV_SUPPORT is not set # CONFIG_SPL_FS_EXT4 is not set diff --git a/configs/am335x_igep003x_defconfig b/configs/am335x_igep003x_defconfig index 0b048a5737..4dd6366ef6 100644 --- a/configs/am335x_igep003x_defconfig +++ b/configs/am335x_igep003x_defconfig @@ -20,8 +20,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_FDT_FIXUP_PARTITIONS=y CONFIG_BOOTCOMMAND="run findfdt;run mmcboot;run nandboot;run netboot;" CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y CONFIG_SPL_MTD_SUPPORT=y diff --git a/configs/am335x_pdu001_defconfig b/configs/am335x_pdu001_defconfig index e68efde33b..557949c651 100644 --- a/configs/am335x_pdu001_defconfig +++ b/configs/am335x_pdu001_defconfig @@ -24,8 +24,8 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_BOOTCOMMAND="run eval_boot_device;part uuid mmc ${mmc_boot}:${root_fs_partition} root_fs_partuuid;setenv bootargs console=${console} vt.global_cursor_default=0 root=PARTUUID=${root_fs_partuuid} rootfstype=ext4 rootwait rootdelay=1;fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};bootz ${loadaddr} - ${fdtaddr}" CONFIG_BOARD_LATE_INIT=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig index 85c582684e..24041e2345 100644 --- a/configs/am335x_shc_defconfig +++ b/configs/am335x_shc_defconfig @@ -32,8 +32,8 @@ CONFIG_BOOTCOMMAND="if mmc dev 1; mmc rescan; then run emmc_setup; else echo ERR CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig index 7f2d9e637a..ab06034ba5 100644 --- a/configs/am335x_shc_ict_defconfig +++ b/configs/am335x_shc_ict_defconfig @@ -30,8 +30,8 @@ CONFIG_BOOTCOMMAND="if mmc dev 0; mmc rescan; then run sd_setup; else echo ERROR CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig index a2ab9e16bd..995cbfcad8 100644 --- a/configs/am335x_shc_netboot_defconfig +++ b/configs/am335x_shc_netboot_defconfig @@ -33,8 +33,8 @@ CONFIG_BOOTCOMMAND="run fusecmd; if run netboot; then echo Booting from network; CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig index 593303594e..03db57c6bc 100644 --- a/configs/am335x_shc_sdboot_defconfig +++ b/configs/am335x_shc_sdboot_defconfig @@ -33,8 +33,8 @@ CONFIG_BOOTCOMMAND="if mmc dev 0; mmc rescan; then run sd_setup; else echo ERROR CONFIG_DEFAULT_FDT_FILE="am335x-shc" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/am335x_sl50_defconfig b/configs/am335x_sl50_defconfig index 44c23019e4..9ba376feda 100644 --- a/configs/am335x_sl50_defconfig +++ b/configs/am335x_sl50_defconfig @@ -23,8 +23,8 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index c514b525b4..0a83ac9378 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -21,8 +21,8 @@ CONFIG_BOOTDELAY=10 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device $mmcdev; if run loadbootenv; then run importbootenv; fi; echo Checking if uenvcmd is set ...; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; echo Running default loadimage ...; setenv bootfile zImage; if run loadimage; then run loadfdt; run mmcboot; fi; else run nandboot; fi" CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -32,7 +32,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x2a0000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index 323862009f..6571afd345 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -18,8 +18,8 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set CONFIG_SPL_MAX_SIZE=0x439e0 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_ETH=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y diff --git a/configs/am43xx_evm_rtconly_defconfig b/configs/am43xx_evm_rtconly_defconfig index 9cafe9c10c..e84aed4d54 100644 --- a/configs/am43xx_evm_rtconly_defconfig +++ b/configs/am43xx_evm_rtconly_defconfig @@ -18,8 +18,8 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set CONFIG_SPL_MAX_SIZE=0x439e0 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig index 406c0fc2d7..0cae3242b0 100644 --- a/configs/am43xx_evm_usbhost_boot_defconfig +++ b/configs/am43xx_evm_usbhost_boot_defconfig @@ -17,8 +17,8 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set CONFIG_SPL_MAX_SIZE=0x37690 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index 0f7d5bb9a4..370ee96725 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -24,8 +24,8 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set CONFIG_SPL_MAX_SIZE=0x36100 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_ETH=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_MTD_SUPPORT=y diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig index 9008c5e466..b8aa6fe736 100644 --- a/configs/am57xx_evm_defconfig +++ b/configs/am57xx_evm_defconfig @@ -30,8 +30,8 @@ CONFIG_AVB_VERIFY=y CONFIG_ANDROID_AB=y CONFIG_SPL_MAX_SIZE=0x7bc00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/am57xx_hs_evm_defconfig b/configs/am57xx_hs_evm_defconfig index a7404e9c09..cc043900a8 100644 --- a/configs/am57xx_hs_evm_defconfig +++ b/configs/am57xx_hs_evm_defconfig @@ -33,8 +33,8 @@ CONFIG_AVB_VERIFY=y CONFIG_ANDROID_AB=y CONFIG_SPL_MAX_SIZE=0x7a8b0 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/am57xx_hs_evm_usb_defconfig b/configs/am57xx_hs_evm_usb_defconfig index dde0fb569a..aa5d3263d7 100644 --- a/configs/am57xx_hs_evm_usb_defconfig +++ b/configs/am57xx_hs_evm_usb_defconfig @@ -35,8 +35,8 @@ CONFIG_AVB_VERIFY=y CONFIG_ANDROID_AB=y CONFIG_SPL_MAX_SIZE=0x74eb0 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/am62ax_evm_r5_defconfig b/configs/am62ax_evm_r5_defconfig index 05c30cbba1..2c53673deb 100644 --- a/configs/am62ax_evm_r5_defconfig +++ b/configs/am62ax_evm_r5_defconfig @@ -36,9 +36,9 @@ CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 diff --git a/configs/am62x_evm_r5_defconfig b/configs/am62x_evm_r5_defconfig index 489ee943fe..ae3789bad3 100644 --- a/configs/am62x_evm_r5_defconfig +++ b/configs/am62x_evm_r5_defconfig @@ -43,10 +43,10 @@ CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 diff --git a/configs/am64x_evm_a53_defconfig b/configs/am64x_evm_a53_defconfig index 718ad176cb..9c41055b1e 100644 --- a/configs/am64x_evm_a53_defconfig +++ b/configs/am64x_evm_a53_defconfig @@ -41,8 +41,8 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y diff --git a/configs/am64x_evm_r5_defconfig b/configs/am64x_evm_r5_defconfig index b501c17b87..ddc4148058 100644 --- a/configs/am64x_evm_r5_defconfig +++ b/configs/am64x_evm_r5_defconfig @@ -44,10 +44,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 diff --git a/configs/am65x_evm_a53_defconfig b/configs/am65x_evm_a53_defconfig index cf55f9bbe3..19db33b917 100644 --- a/configs/am65x_evm_a53_defconfig +++ b/configs/am65x_evm_a53_defconfig @@ -43,8 +43,8 @@ CONFIG_SPL_BSS_START_ADDR=0x80a00000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y diff --git a/configs/am65x_evm_r5_defconfig b/configs/am65x_evm_r5_defconfig index d5196c2024..b2f1e721b3 100644 --- a/configs/am65x_evm_r5_defconfig +++ b/configs/am65x_evm_r5_defconfig @@ -40,10 +40,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0xc00 CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 diff --git a/configs/am65x_evm_r5_usbdfu_defconfig b/configs/am65x_evm_r5_usbdfu_defconfig index 88f68aa70e..f610b2dd94 100644 --- a/configs/am65x_evm_r5_usbdfu_defconfig +++ b/configs/am65x_evm_r5_usbdfu_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0xc00 CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/am65x_evm_r5_usbmsc_defconfig b/configs/am65x_evm_r5_usbmsc_defconfig index b6adcf60b8..57a0e729e2 100644 --- a/configs/am65x_evm_r5_usbmsc_defconfig +++ b/configs/am65x_evm_r5_usbmsc_defconfig @@ -36,10 +36,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0xc00 CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/am65x_hs_evm_a53_defconfig b/configs/am65x_hs_evm_a53_defconfig index 6b32aa27fd..7714c4d736 100644 --- a/configs/am65x_hs_evm_a53_defconfig +++ b/configs/am65x_hs_evm_a53_defconfig @@ -43,8 +43,8 @@ CONFIG_SPL_BSS_START_ADDR=0x80a00000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y diff --git a/configs/am65x_hs_evm_r5_defconfig b/configs/am65x_hs_evm_r5_defconfig index 0c7b53ca2c..8b3b3fcb13 100644 --- a/configs/am65x_hs_evm_r5_defconfig +++ b/configs/am65x_hs_evm_r5_defconfig @@ -36,10 +36,10 @@ CONFIG_SPL_BSS_START_ADDR=0x41c7effc CONFIG_SPL_BSS_MAX_SIZE=0xc00 CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 diff --git a/configs/apalis-tk1_defconfig b/configs/apalis-tk1_defconfig index 02e6de8131..eca326c924 100644 --- a/configs/apalis-tk1_defconfig +++ b/configs/apalis-tk1_defconfig @@ -28,10 +28,10 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Apalis TK1 # " CONFIG_SYS_MAXARGS=32 CONFIG_SYS_CBSIZE=1024 diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 6214b44eb1..aa9cf77960 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -39,7 +39,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SYS_PROMPT="Apalis iMX6 # " diff --git a/configs/apalis_t30_defconfig b/configs/apalis_t30_defconfig index d902fc1f4a..b2d9254f96 100644 --- a/configs/apalis_t30_defconfig +++ b/configs/apalis_t30_defconfig @@ -23,10 +23,10 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Apalis T30 # " CONFIG_SYS_MAXARGS=32 CONFIG_SYS_CBSIZE=1024 diff --git a/configs/axm_defconfig b/configs/axm_defconfig index d7d14cf0d3..f9c02144c4 100644 --- a/configs/axm_defconfig +++ b/configs/axm_defconfig @@ -44,10 +44,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x600 # CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20ba0000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x460000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x20ba0000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x460000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 7684ae6a3d..a4d299e4fd 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -21,10 +21,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (Beaver) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2084 diff --git a/configs/bitmain_antminer_s9_defconfig b/configs/bitmain_antminer_s9_defconfig index 161b44cfb2..b8c9afd9cf 100644 --- a/configs/bitmain_antminer_s9_defconfig +++ b/configs/bitmain_antminer_s9_defconfig @@ -33,8 +33,8 @@ CONFIG_SPL_BSS_START_ADDR=0x100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="antminer> " CONFIG_SYS_MAXARGS=32 diff --git a/configs/brppt1_mmc_defconfig b/configs/brppt1_mmc_defconfig index 278ce5909b..640daa6858 100644 --- a/configs/brppt1_mmc_defconfig +++ b/configs/brppt1_mmc_defconfig @@ -37,8 +37,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_POWER=y diff --git a/configs/brppt2_defconfig b/configs/brppt2_defconfig index eee873eeda..e17dad9458 100644 --- a/configs/brppt2_defconfig +++ b/configs/brppt2_defconfig @@ -32,7 +32,7 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run b_default" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_BOARD_INIT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y CONFIG_SPL_DM_SPI_FLASH=y diff --git a/configs/brsmarc1_defconfig b/configs/brsmarc1_defconfig index 8154039431..cb06db61fb 100644 --- a/configs/brsmarc1_defconfig +++ b/configs/brsmarc1_defconfig @@ -38,8 +38,8 @@ CONFIG_BOARD_TYPES=y CONFIG_ARCH_MISC_INIT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/brxre1_defconfig b/configs/brxre1_defconfig index 9a4deff6e7..91c2560b9b 100644 --- a/configs/brxre1_defconfig +++ b/configs/brxre1_defconfig @@ -34,8 +34,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_I2C=y # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SPL_POWER=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index a264ebe567..0cac7639d1 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -20,10 +20,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (Cardhu) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2084 diff --git a/configs/cei-tk1-som_defconfig b/configs/cei-tk1-som_defconfig index 85423995c8..628a9d1252 100644 --- a/configs/cei-tk1-som_defconfig +++ b/configs/cei-tk1-som_defconfig @@ -24,10 +24,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra124 (TK1-SOM) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2086 diff --git a/configs/cgtqmx8_defconfig b/configs/cgtqmx8_defconfig index 75fc0fcca6..aef7069fd5 100644 --- a/configs/cgtqmx8_defconfig +++ b/configs/cgtqmx8_defconfig @@ -36,10 +36,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x1000 # CONFIG_SPL_BINMAN_UBOOT_SYMBOLS is not set CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SYS_MMCSD_FS_BOOT_PARTITION=0 diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig index 0c3fd42840..06642d282d 100644 --- a/configs/chiliboard_defconfig +++ b/configs/chiliboard_defconfig @@ -24,8 +24,8 @@ CONFIG_BOOTCOMMAND="run mmcboot; run nandboot; run netboot" CONFIG_DEFAULT_FDT_FILE="am335x-chiliboard.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/cl-som-imx7_defconfig b/configs/cl-som-imx7_defconfig index 503da922a5..26f50a5db2 100644 --- a/configs/cl-som-imx7_defconfig +++ b/configs/cl-som-imx7_defconfig @@ -31,7 +31,7 @@ CONFIG_SPL_MAX_SIZE=0xe000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_MAX_SIZE=0x100000 CONFIG_SPL_BOARD_INIT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80 CONFIG_SPL_I2C=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index d63a9130e4..fab8351bb0 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -33,7 +33,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run legacy_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="usb start;sf probe" CONFIG_MISC_INIT_R=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x80 CONFIG_SPL_I2C=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/cm_t43_defconfig b/configs/cm_t43_defconfig index bc2ab1af4c..73ccefd269 100644 --- a/configs/cm_t43_defconfig +++ b/configs/cm_t43_defconfig @@ -32,8 +32,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set # CONFIG_MISC_INIT_R is not set CONFIG_SPL_MAX_SIZE=0x37690 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x480 CONFIG_SPL_FS_EXT4=y CONFIG_SPL_I2C=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index de5633cbb1..51f3eeca75 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -38,7 +38,7 @@ CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SYS_PROMPT="Colibri iMX6 # " diff --git a/configs/colibri_t20_defconfig b/configs/colibri_t20_defconfig index 28a77d1bd3..62b7cc5ea3 100644 --- a/configs/colibri_t20_defconfig +++ b/configs/colibri_t20_defconfig @@ -21,10 +21,10 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Colibri T20 # " CONFIG_SYS_MAXARGS=32 CONFIG_SYS_CBSIZE=1024 diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index 88dc245961..43f9e21f1b 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -22,10 +22,10 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Colibri T30 # " CONFIG_SYS_MAXARGS=32 CONFIG_SYS_CBSIZE=1024 diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index 7d8758831c..8043ecfb08 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -45,10 +45,10 @@ CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0f70000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x110000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0f70000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x110000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig index 0ccd1b4773..5f6f5d788d 100644 --- a/configs/da850evm_nand_defconfig +++ b/configs/da850evm_nand_defconfig @@ -41,10 +41,10 @@ CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0f70000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x110000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0f70000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x110000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 442827dbe8..85b349f3c5 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -20,10 +20,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra114 (Dalmore) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2086 diff --git a/configs/deneb_defconfig b/configs/deneb_defconfig index b19a5c54c9..82869e4e0f 100644 --- a/configs/deneb_defconfig +++ b/configs/deneb_defconfig @@ -46,10 +46,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig index caeb0094cd..ef16da176a 100644 --- a/configs/devkit8000_defconfig +++ b/configs/devkit8000_defconfig @@ -19,16 +19,16 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_BSS_START_ADDR=0x80000500 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x80000100 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80000100 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x500 diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index 5ea9e0b216..5a83b6a08a 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -38,7 +38,7 @@ CONFIG_SPL_FIT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400 CONFIG_SPL_WATCHDOG=y diff --git a/configs/display5_defconfig b/configs/display5_defconfig index 481c737ecf..24f22f0b03 100644 --- a/configs/display5_defconfig +++ b/configs/display5_defconfig @@ -38,14 +38,14 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="if run check_em_pad; then run recovery;else if test ${BOOT_FROM} = FACTORY; then run factory_nfs;else run boot_mmc;fi;fi" CONFIG_MISC_INIT_R=y CONFIG_SPL_BOOTCOUNT_LIMIT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DMA=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_SAVEENV=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00 diff --git a/configs/display5_factory_defconfig b/configs/display5_factory_defconfig index 672b76e059..19b1898373 100644 --- a/configs/display5_factory_defconfig +++ b/configs/display5_factory_defconfig @@ -35,12 +35,12 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="echo SDP Display5 recovery" CONFIG_MISC_INIT_R=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x100 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x3F00 diff --git a/configs/dra7xx_evm_defconfig b/configs/dra7xx_evm_defconfig index 0a6019d5bd..19ca89fa86 100644 --- a/configs/dra7xx_evm_defconfig +++ b/configs/dra7xx_evm_defconfig @@ -30,8 +30,8 @@ CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set CONFIG_SPL_MAX_SIZE=0x7bc00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/dra7xx_hs_evm_defconfig b/configs/dra7xx_hs_evm_defconfig index 4bc6f415e7..0a53f62012 100644 --- a/configs/dra7xx_hs_evm_defconfig +++ b/configs/dra7xx_hs_evm_defconfig @@ -33,8 +33,8 @@ CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set CONFIG_SPL_MAX_SIZE=0x7a8b0 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig index 20a72da97d..3a1b48f662 100644 --- a/configs/dra7xx_hs_evm_usb_defconfig +++ b/configs/dra7xx_hs_evm_usb_defconfig @@ -34,8 +34,8 @@ CONFIG_BOARD_EARLY_INIT_F=y # CONFIG_MISC_INIT_R is not set CONFIG_SPL_MAX_SIZE=0x74eb0 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_DMA=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/draco_defconfig b/configs/draco_defconfig index 981a364803..ee19920a70 100644 --- a/configs/draco_defconfig +++ b/configs/draco_defconfig @@ -37,9 +37,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_BSS_START_ADDR=0x80000000 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/endeavoru_defconfig b/configs/endeavoru_defconfig index 0cea58ca34..d605acdfc8 100644 --- a/configs/endeavoru_defconfig +++ b/configs/endeavoru_defconfig @@ -24,10 +24,10 @@ CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; po CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (Endeavoru) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2084 diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig index 870d8d2efc..c0ce7a3356 100644 --- a/configs/etamin_defconfig +++ b/configs/etamin_defconfig @@ -38,9 +38,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_BSS_START_ADDR=0x80000000 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/gardena-smart-gateway-at91sam_defconfig b/configs/gardena-smart-gateway-at91sam_defconfig index f6a6740186..439fcc0575 100644 --- a/configs/gardena-smart-gateway-at91sam_defconfig +++ b/configs/gardena-smart-gateway-at91sam_defconfig @@ -43,8 +43,8 @@ CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_RAW_ONLY=y diff --git a/configs/ge_b1x5v2_defconfig b/configs/ge_b1x5v2_defconfig index b760fded85..278a5a12df 100644 --- a/configs/ge_b1x5v2_defconfig +++ b/configs/ge_b1x5v2_defconfig @@ -39,7 +39,7 @@ CONFIG_LOG_MAX_LEVEL=8 CONFIG_LOG_DEFAULT_LEVEL=4 CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400 CONFIG_HUSH_PARSER=y diff --git a/configs/giedi_defconfig b/configs/giedi_defconfig index 932f1ea445..b56b736c43 100644 --- a/configs/giedi_defconfig +++ b/configs/giedi_defconfig @@ -46,10 +46,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y diff --git a/configs/grouper_common_defconfig b/configs/grouper_common_defconfig index e90cae2bb8..54256ca97b 100644 --- a/configs/grouper_common_defconfig +++ b/configs/grouper_common_defconfig @@ -24,10 +24,10 @@ CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc0; po CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (Grouper) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2084 diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index d7de5136fe..08afc7fb9c 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -44,12 +44,12 @@ CONFIG_MISC_INIT_R=y CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 6d954c9a31..3f0cb19d15 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -44,13 +44,13 @@ CONFIG_MISC_INIT_R=y CONFIG_PCI_INIT_R=y CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_DMA=y CONFIG_SPL_I2C=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x1200000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index 6558a67051..ba58e23138 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -18,10 +18,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Harmony) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2085 diff --git a/configs/igep00x0_defconfig b/configs/igep00x0_defconfig index 8f43dd72e6..993bbe29c6 100644 --- a/configs/igep00x0_defconfig +++ b/configs/igep00x0_defconfig @@ -21,8 +21,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y @@ -43,7 +43,7 @@ CONFIG_SPL_UBI_LOAD_KERNEL_ID=3 CONFIG_SPL_UBI_LOAD_ARGS_ID=4 CONFIG_SPL_ONENAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig index cef7352ad8..c1b0487f7e 100644 --- a/configs/imx28_xea_defconfig +++ b/configs/imx28_xea_defconfig @@ -51,7 +51,7 @@ CONFIG_SPL_DMA=y CONFIG_SPL_MMC_TINY=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x44000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x44000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x800 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x400 diff --git a/configs/imx6dl_icore_nand_defconfig b/configs/imx6dl_icore_nand_defconfig index 8d53282e4c..da62af9f9b 100644 --- a/configs/imx6dl_icore_nand_defconfig +++ b/configs/imx6dl_icore_nand_defconfig @@ -24,7 +24,7 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx6dl_mamoj_defconfig b/configs/imx6dl_mamoj_defconfig index 8c7c13ebc8..35ded27c83 100644 --- a/configs/imx6dl_mamoj_defconfig +++ b/configs/imx6dl_mamoj_defconfig @@ -18,9 +18,9 @@ CONFIG_SYS_MEMTEST_END=0x88000000 CONFIG_LTO=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x13000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x13000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6q_bosch_acc_defconfig b/configs/imx6q_bosch_acc_defconfig index c44d43aaca..05bab034e0 100644 --- a/configs/imx6q_bosch_acc_defconfig +++ b/configs/imx6q_bosch_acc_defconfig @@ -35,7 +35,7 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run mmc_mmc_fit" CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xaa # CONFIG_SPL_CRYPTO is not set CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx6q_icore_nand_defconfig b/configs/imx6q_icore_nand_defconfig index 59c6d6b6bb..ffad04f856 100644 --- a/configs/imx6q_icore_nand_defconfig +++ b/configs/imx6q_icore_nand_defconfig @@ -25,7 +25,7 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx6q_logic_defconfig b/configs/imx6q_logic_defconfig index 0c07b98966..5ee1f5d255 100644 --- a/configs/imx6q_logic_defconfig +++ b/configs/imx6q_logic_defconfig @@ -28,14 +28,14 @@ CONFIG_BOOTCOMMAND="run autoboot" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DMA=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x500000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 diff --git a/configs/imx6qdl_icore_mipi_defconfig b/configs/imx6qdl_icore_mipi_defconfig index c170638df5..46be3b69c8 100644 --- a/configs/imx6qdl_icore_mipi_defconfig +++ b/configs/imx6qdl_icore_mipi_defconfig @@ -33,9 +33,9 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6qdl_icore_mmc_defconfig b/configs/imx6qdl_icore_mmc_defconfig index 90d01f2291..c71e87efab 100644 --- a/configs/imx6qdl_icore_mmc_defconfig +++ b/configs/imx6qdl_icore_mmc_defconfig @@ -36,9 +36,9 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6qdl_icore_nand_defconfig b/configs/imx6qdl_icore_nand_defconfig index 59c6d6b6bb..ffad04f856 100644 --- a/configs/imx6qdl_icore_nand_defconfig +++ b/configs/imx6qdl_icore_nand_defconfig @@ -25,7 +25,7 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx6qdl_icore_rqs_defconfig b/configs/imx6qdl_icore_rqs_defconfig index d5a69b328c..83d5e19382 100644 --- a/configs/imx6qdl_icore_rqs_defconfig +++ b/configs/imx6qdl_icore_rqs_defconfig @@ -30,9 +30,9 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1000 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x800 diff --git a/configs/imx6ul_geam_mmc_defconfig b/configs/imx6ul_geam_mmc_defconfig index a33d2ac6a7..a7f913c8d9 100644 --- a/configs/imx6ul_geam_mmc_defconfig +++ b/configs/imx6ul_geam_mmc_defconfig @@ -29,7 +29,7 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="geam6ul> " diff --git a/configs/imx6ul_geam_nand_defconfig b/configs/imx6ul_geam_nand_defconfig index 376794952b..05cac0b6ea 100644 --- a/configs/imx6ul_geam_nand_defconfig +++ b/configs/imx6ul_geam_nand_defconfig @@ -25,7 +25,7 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx6ul_isiot_emmc_defconfig b/configs/imx6ul_isiot_emmc_defconfig index fe31e85a49..3a3ac3ad14 100644 --- a/configs/imx6ul_isiot_emmc_defconfig +++ b/configs/imx6ul_isiot_emmc_defconfig @@ -29,7 +29,7 @@ CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="isiotmx6ul> " diff --git a/configs/imx6ul_isiot_nand_defconfig b/configs/imx6ul_isiot_nand_defconfig index 6f55ce6259..afd27900a6 100644 --- a/configs/imx6ul_isiot_nand_defconfig +++ b/configs/imx6ul_isiot_nand_defconfig @@ -25,7 +25,7 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run $modeboot" -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx6ulz_smm_m2_defconfig b/configs/imx6ulz_smm_m2_defconfig index f3da19deb0..d6edc71900 100644 --- a/configs/imx6ulz_smm_m2_defconfig +++ b/configs/imx6ulz_smm_m2_defconfig @@ -23,7 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BSS_START_ADDR=0x84100000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_SUPPORT=y diff --git a/configs/imx7_cm_defconfig b/configs/imx7_cm_defconfig index c43aed4a94..30bf4eb3b0 100644 --- a/configs/imx7_cm_defconfig +++ b/configs/imx7_cm_defconfig @@ -28,7 +28,7 @@ CONFIG_DEFAULT_FDT_FILE="ask" CONFIG_SPL_MAX_SIZE=0xe000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_MAX_SIZE=0x100000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_I2C=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 diff --git a/configs/imx8mm-cl-iot-gate-optee_defconfig b/configs/imx8mm-cl-iot-gate-optee_defconfig index 8c8c8fd198..22bc964e18 100644 --- a/configs/imx8mm-cl-iot-gate-optee_defconfig +++ b/configs/imx8mm-cl-iot-gate-optee_defconfig @@ -30,10 +30,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mm-cl-iot-gate_defconfig b/configs/imx8mm-cl-iot-gate_defconfig index b34834a3d9..fdec2f8f2d 100644 --- a/configs/imx8mm-cl-iot-gate_defconfig +++ b/configs/imx8mm-cl-iot-gate_defconfig @@ -32,10 +32,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig index 31f1d002e2..1f1a5b0003 100644 --- a/configs/imx8mm-icore-mx8mm-ctouch2_defconfig +++ b/configs/imx8mm-icore-mx8mm-ctouch2_defconfig @@ -29,10 +29,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_POWER=y diff --git a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig index 5abbb04a85..a582004e09 100644 --- a/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig +++ b/configs/imx8mm-icore-mx8mm-edimm2.2_defconfig @@ -29,10 +29,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_POWER=y diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig index cbb3f24cde..30719a37ba 100644 --- a/configs/imx8mm-mx8menlo_defconfig +++ b/configs/imx8mm-mx8menlo_defconfig @@ -42,10 +42,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mm_beacon_defconfig b/configs/imx8mm_beacon_defconfig index 6e617e0623..031470c169 100644 --- a/configs/imx8mm_beacon_defconfig +++ b/configs/imx8mm_beacon_defconfig @@ -32,10 +32,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mm_beacon_fspi_defconfig b/configs/imx8mm_beacon_fspi_defconfig index fc4ef94ed9..cb9e6e7ab5 100644 --- a/configs/imx8mm_beacon_fspi_defconfig +++ b/configs/imx8mm_beacon_fspi_defconfig @@ -35,10 +35,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mm_data_modul_edm_sbc_defconfig b/configs/imx8mm_data_modul_edm_sbc_defconfig index ee673e4e95..e724607c6e 100644 --- a/configs/imx8mm_data_modul_edm_sbc_defconfig +++ b/configs/imx8mm_data_modul_edm_sbc_defconfig @@ -53,10 +53,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_LEGACY_IMAGE_FORMAT=y CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mm_evk_defconfig b/configs/imx8mm_evk_defconfig index d2adfaf84f..f1067d7532 100644 --- a/configs/imx8mm_evk_defconfig +++ b/configs/imx8mm_evk_defconfig @@ -30,10 +30,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mm_evk_fspi_defconfig b/configs/imx8mm_evk_fspi_defconfig index e80abff05d..93611a8229 100644 --- a/configs/imx8mm_evk_fspi_defconfig +++ b/configs/imx8mm_evk_fspi_defconfig @@ -33,10 +33,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mm_phg_defconfig b/configs/imx8mm_phg_defconfig index deb08712e3..67db255b83 100644 --- a/configs/imx8mm_phg_defconfig +++ b/configs/imx8mm_phg_defconfig @@ -30,10 +30,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig index 228a5e02c5..71c86b1a67 100644 --- a/configs/imx8mm_venice_defconfig +++ b/configs/imx8mm_venice_defconfig @@ -37,9 +37,9 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mn_beacon_2g_defconfig b/configs/imx8mn_beacon_2g_defconfig index 67dca88cb5..c0d7e3c62f 100644 --- a/configs/imx8mn_beacon_2g_defconfig +++ b/configs/imx8mn_beacon_2g_defconfig @@ -42,10 +42,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mn_beacon_defconfig b/configs/imx8mn_beacon_defconfig index 7426bbb222..9409d5142c 100644 --- a/configs/imx8mn_beacon_defconfig +++ b/configs/imx8mn_beacon_defconfig @@ -41,10 +41,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mn_beacon_fspi_defconfig b/configs/imx8mn_beacon_fspi_defconfig index 021968dfd5..2456803151 100644 --- a/configs/imx8mn_beacon_fspi_defconfig +++ b/configs/imx8mn_beacon_fspi_defconfig @@ -41,10 +41,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mn_bsh_smm_s2_defconfig b/configs/imx8mn_bsh_smm_s2_defconfig index 95e5573153..657eb354c1 100644 --- a/configs/imx8mn_bsh_smm_s2_defconfig +++ b/configs/imx8mn_bsh_smm_s2_defconfig @@ -35,10 +35,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_DMA=y diff --git a/configs/imx8mn_bsh_smm_s2pro_defconfig b/configs/imx8mn_bsh_smm_s2pro_defconfig index 15df27b640..52d9972573 100644 --- a/configs/imx8mn_bsh_smm_s2pro_defconfig +++ b/configs/imx8mn_bsh_smm_s2pro_defconfig @@ -36,10 +36,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mn_ddr4_evk_defconfig b/configs/imx8mn_ddr4_evk_defconfig index 83eb776f90..ac5f9fc1e0 100644 --- a/configs/imx8mn_ddr4_evk_defconfig +++ b/configs/imx8mn_ddr4_evk_defconfig @@ -34,10 +34,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig index ad3eddbb57..0fce798f7a 100644 --- a/configs/imx8mn_evk_defconfig +++ b/configs/imx8mn_evk_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mn_var_som_defconfig b/configs/imx8mn_var_som_defconfig index ff26b142dc..fa2f43b306 100644 --- a/configs/imx8mn_var_som_defconfig +++ b/configs/imx8mn_var_som_defconfig @@ -39,10 +39,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig index 3608981b8a..5d2e5a471c 100644 --- a/configs/imx8mn_venice_defconfig +++ b/configs/imx8mn_venice_defconfig @@ -40,10 +40,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig b/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig index c325947c4a..ff27d9925a 100644 --- a/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig +++ b/configs/imx8mp-icore-mx8mp-edimm2.2_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig index 1060f4f742..b686af8d18 100644 --- a/configs/imx8mp_beacon_defconfig +++ b/configs/imx8mp_beacon_defconfig @@ -51,10 +51,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mp_data_modul_edm_sbc_defconfig b/configs/imx8mp_data_modul_edm_sbc_defconfig index ed2d4febf9..ae1a48c681 100644 --- a/configs/imx8mp_data_modul_edm_sbc_defconfig +++ b/configs/imx8mp_data_modul_edm_sbc_defconfig @@ -59,10 +59,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x4c000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig index 148d80a2f4..a77139ab06 100644 --- a/configs/imx8mp_dhcom_pdk2_defconfig +++ b/configs/imx8mp_dhcom_pdk2_defconfig @@ -57,10 +57,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x4c000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig index 6b213c44a1..b617f74321 100644 --- a/configs/imx8mp_dhcom_pdk3_defconfig +++ b/configs/imx8mp_dhcom_pdk3_defconfig @@ -58,10 +58,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x4c000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x4c000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig index b5ea0c8ff9..14c749f443 100644 --- a/configs/imx8mp_evk_defconfig +++ b/configs/imx8mp_evk_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mp_rsb3720a1_4G_defconfig b/configs/imx8mp_rsb3720a1_4G_defconfig index 07e038ceec..ca3c3ef570 100644 --- a/configs/imx8mp_rsb3720a1_4G_defconfig +++ b/configs/imx8mp_rsb3720a1_4G_defconfig @@ -46,10 +46,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mp_rsb3720a1_6G_defconfig b/configs/imx8mp_rsb3720a1_6G_defconfig index bdbba7611a..61d539fb59 100644 --- a/configs/imx8mp_rsb3720a1_6G_defconfig +++ b/configs/imx8mp_rsb3720a1_6G_defconfig @@ -46,10 +46,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mp_venice_defconfig b/configs/imx8mp_venice_defconfig index 52a070e00a..25f34b85da 100644 --- a/configs/imx8mp_venice_defconfig +++ b/configs/imx8mp_venice_defconfig @@ -40,10 +40,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x400 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mq_cm_defconfig b/configs/imx8mq_cm_defconfig index 91f7b1c063..c703671849 100644 --- a/configs/imx8mq_cm_defconfig +++ b/configs/imx8mq_cm_defconfig @@ -34,10 +34,10 @@ CONFIG_SPL_BSS_START_ADDR=0x180000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig index 42eae95903..72e1757e8b 100644 --- a/configs/imx8mq_evk_defconfig +++ b/configs/imx8mq_evk_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_BSS_START_ADDR=0x180000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mq_phanbell_defconfig b/configs/imx8mq_phanbell_defconfig index cbb6afa76b..35f429f724 100644 --- a/configs/imx8mq_phanbell_defconfig +++ b/configs/imx8mq_phanbell_defconfig @@ -38,10 +38,10 @@ CONFIG_SPL_BSS_START_ADDR=0x180000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8mq_reform2_defconfig b/configs/imx8mq_reform2_defconfig index af7901777f..e503175a84 100644 --- a/configs/imx8mq_reform2_defconfig +++ b/configs/imx8mq_reform2_defconfig @@ -40,10 +40,10 @@ CONFIG_SPL_BSS_START_ADDR=0x180000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/imx8qm_mek_defconfig b/configs/imx8qm_mek_defconfig index 95b1d83148..b9083b0453 100644 --- a/configs/imx8qm_mek_defconfig +++ b/configs/imx8qm_mek_defconfig @@ -40,10 +40,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y diff --git a/configs/imx8qxp_mek_defconfig b/configs/imx8qxp_mek_defconfig index 183f4fd0bb..f516b0b555 100644 --- a/configs/imx8qxp_mek_defconfig +++ b/configs/imx8qxp_mek_defconfig @@ -40,10 +40,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x1000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x120000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x3000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x120000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x3000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 CONFIG_SPL_POWER_DOMAIN=y diff --git a/configs/imx8ulp_evk_defconfig b/configs/imx8ulp_evk_defconfig index c08db70b96..40a4dca250 100644 --- a/configs/imx8ulp_evk_defconfig +++ b/configs/imx8ulp_evk_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x22040000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x22040000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x8000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_WATCHDOG=y diff --git a/configs/imx93_11x11_evk_defconfig b/configs/imx93_11x11_evk_defconfig index 89130c437d..3b5c7bd65a 100644 --- a/configs/imx93_11x11_evk_defconfig +++ b/configs/imx93_11x11_evk_defconfig @@ -34,10 +34,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040 CONFIG_SPL_I2C=y diff --git a/configs/imx93_11x11_evk_ld_defconfig b/configs/imx93_11x11_evk_ld_defconfig index 808403220a..071f2fa3f3 100644 --- a/configs/imx93_11x11_evk_ld_defconfig +++ b/configs/imx93_11x11_evk_ld_defconfig @@ -35,10 +35,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x83200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040 CONFIG_SPL_I2C=y diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig index a43a16559e..3cc0154e35 100644 --- a/configs/iot2050_defconfig +++ b/configs/iot2050_defconfig @@ -48,8 +48,8 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DM_MAILBOX=y diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig index 78f2f8a39b..481289d12e 100644 --- a/configs/j7200_evm_a72_defconfig +++ b/configs/j7200_evm_a72_defconfig @@ -42,8 +42,8 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1800 CONFIG_SPL_DMA=y diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig index c4dd33627b..42ff450aa0 100644 --- a/configs/j7200_evm_r5_defconfig +++ b/configs/j7200_evm_r5_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0xa000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x800 diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig index 25a1033698..5d4fcafee8 100644 --- a/configs/j721e_evm_a72_defconfig +++ b/configs/j721e_evm_a72_defconfig @@ -42,8 +42,8 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y diff --git a/configs/j721e_evm_r5_defconfig b/configs/j721e_evm_r5_defconfig index d974be275f..4d2eefc6ef 100644 --- a/configs/j721e_evm_r5_defconfig +++ b/configs/j721e_evm_r5_defconfig @@ -42,10 +42,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0xa000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 diff --git a/configs/j721s2_evm_a72_defconfig b/configs/j721s2_evm_a72_defconfig index 2bd935221c..ded61b6c91 100644 --- a/configs/j721s2_evm_a72_defconfig +++ b/configs/j721s2_evm_a72_defconfig @@ -41,8 +41,8 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 CONFIG_SPL_DMA=y diff --git a/configs/j721s2_evm_r5_defconfig b/configs/j721s2_evm_r5_defconfig index 1e66ac23d0..6fd90defd5 100644 --- a/configs/j721s2_evm_r5_defconfig +++ b/configs/j721s2_evm_r5_defconfig @@ -43,10 +43,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index 2a2e5f5157..77af45958d 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -23,10 +23,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra124 (Jetson TK1) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2089 diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig index d0410a46f9..ab8dea3943 100644 --- a/configs/k2e_evm_defconfig +++ b/configs/k2e_evm_defconfig @@ -36,8 +36,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0xc10fff8 CONFIG_SPL_BSS_MAX_SIZE=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x8000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig index 2dc8fe1ed4..7a9a379e15 100644 --- a/configs/k2g_evm_defconfig +++ b/configs/k2g_evm_defconfig @@ -35,8 +35,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0xc0afff8 CONFIG_SPL_BSS_MAX_SIZE=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x8000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig index 8b7e0179a8..d5ed309bd8 100644 --- a/configs/k2hk_evm_defconfig +++ b/configs/k2hk_evm_defconfig @@ -36,8 +36,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0xc20fff8 CONFIG_SPL_BSS_MAX_SIZE=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x8000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig index dbc3226de7..c405748ddc 100644 --- a/configs/k2l_evm_defconfig +++ b/configs/k2l_evm_defconfig @@ -36,8 +36,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0xc10fff8 CONFIG_SPL_BSS_MAX_SIZE=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x8000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x8000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/kontron-sl-mx6ul_defconfig b/configs/kontron-sl-mx6ul_defconfig index e5e0d16fbc..1e3a6b5474 100644 --- a/configs/kontron-sl-mx6ul_defconfig +++ b/configs/kontron-sl-mx6ul_defconfig @@ -34,7 +34,7 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y CONFIG_SPL_LEGACY_IMAGE_CRC_CHECK=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x11400 CONFIG_SPL_WATCHDOG=y diff --git a/configs/kontron-sl-mx8mm_defconfig b/configs/kontron-sl-mx8mm_defconfig index ae9337f3e4..78e44abed7 100644 --- a/configs/kontron-sl-mx8mm_defconfig +++ b/configs/kontron-sl-mx8mm_defconfig @@ -38,10 +38,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/kontron_pitx_imx8m_defconfig b/configs/kontron_pitx_imx8m_defconfig index 97a87ddccf..6e9b28907e 100644 --- a/configs/kontron_pitx_imx8m_defconfig +++ b/configs/kontron_pitx_imx8m_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x180000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index 3b33272b70..ef0145255d 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -47,7 +47,7 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x900 CONFIG_SPL_MPC8XXX_INIT_DDR=y diff --git a/configs/kp_imx6q_tpc_defconfig b/configs/kp_imx6q_tpc_defconfig index dbfb0bafec..3a7763c443 100644 --- a/configs/kp_imx6q_tpc_defconfig +++ b/configs/kp_imx6q_tpc_defconfig @@ -28,7 +28,7 @@ CONFIG_AUTOBOOT_STOP_STR="." # CONFIG_USE_BOOTCOMMAND is not set CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_POWER=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_MAXARGS=32 diff --git a/configs/librem5_defconfig b/configs/librem5_defconfig index 11456eea13..7f630edcdf 100644 --- a/configs/librem5_defconfig +++ b/configs/librem5_defconfig @@ -41,10 +41,10 @@ CONFIG_SPL_BSS_START_ADDR=0x180000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/liteboard_defconfig b/configs/liteboard_defconfig index 83be20fb90..1ff5b3c0cb 100644 --- a/configs/liteboard_defconfig +++ b/configs/liteboard_defconfig @@ -25,7 +25,7 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev};if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_DEFAULT_FDT_FILE="imx6ul-liteboard.dtb" CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_MAXARGS=32 diff --git a/configs/ls1021aiot_sdcard_defconfig b/configs/ls1021aiot_sdcard_defconfig index 5e600bf8cf..5927d3eade 100644 --- a/configs/ls1021aiot_sdcard_defconfig +++ b/configs/ls1021aiot_sdcard_defconfig @@ -44,9 +44,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82080000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82080000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1021aqds_nand_defconfig b/configs/ls1021aqds_nand_defconfig index 8a794c7af8..2279544967 100644 --- a/configs/ls1021aqds_nand_defconfig +++ b/configs/ls1021aqds_nand_defconfig @@ -54,9 +54,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig b/configs/ls1021aqds_sdcard_ifc_defconfig index 59836a69cc..c639eb29ff 100644 --- a/configs/ls1021aqds_sdcard_ifc_defconfig +++ b/configs/ls1021aqds_sdcard_ifc_defconfig @@ -53,9 +53,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x820c0000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x820c0000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig index 2845386007..8e4b218361 100644 --- a/configs/ls1021aqds_sdcard_qspi_defconfig +++ b/configs/ls1021aqds_sdcard_qspi_defconfig @@ -52,9 +52,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x820c0000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x820c0000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1021atsn_sdcard_defconfig b/configs/ls1021atsn_sdcard_defconfig index ffabfdb871..e78f27e728 100644 --- a/configs/ls1021atsn_sdcard_defconfig +++ b/configs/ls1021atsn_sdcard_defconfig @@ -46,9 +46,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82100000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82100000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig index c7021ea4a5..376a3e4545 100644 --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig @@ -54,9 +54,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82104000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82104000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig b/configs/ls1021atwr_sdcard_ifc_defconfig index 9d5fc6a2f7..0a84595831 100644 --- a/configs/ls1021atwr_sdcard_ifc_defconfig +++ b/configs/ls1021atwr_sdcard_ifc_defconfig @@ -55,9 +55,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82100000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82100000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig b/configs/ls1021atwr_sdcard_qspi_defconfig index be9a0692e4..26d302cee5 100644 --- a/configs/ls1021atwr_sdcard_qspi_defconfig +++ b/configs/ls1021atwr_sdcard_qspi_defconfig @@ -56,9 +56,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x82100000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x82100000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1043aqds_nand_defconfig b/configs/ls1043aqds_nand_defconfig index 9f0deafe89..6045d770b1 100644 --- a/configs/ls1043aqds_nand_defconfig +++ b/configs/ls1043aqds_nand_defconfig @@ -61,9 +61,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1043aqds_sdcard_ifc_defconfig b/configs/ls1043aqds_sdcard_ifc_defconfig index 0a47f72052..852c82e6e6 100644 --- a/configs/ls1043aqds_sdcard_ifc_defconfig +++ b/configs/ls1043aqds_sdcard_ifc_defconfig @@ -62,7 +62,7 @@ CONFIG_SPL_BSS_START_ADDR=0x8f000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1043aqds_sdcard_qspi_defconfig b/configs/ls1043aqds_sdcard_qspi_defconfig index e921db9a09..e4a4387e36 100644 --- a/configs/ls1043aqds_sdcard_qspi_defconfig +++ b/configs/ls1043aqds_sdcard_qspi_defconfig @@ -62,7 +62,7 @@ CONFIG_SPL_BSS_START_ADDR=0x8f000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig index 409a344632..987acf03cc 100644 --- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig @@ -46,9 +46,9 @@ CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1043ardb_nand_defconfig b/configs/ls1043ardb_nand_defconfig index 868ef422d5..6d7d458d4f 100644 --- a/configs/ls1043ardb_nand_defconfig +++ b/configs/ls1043ardb_nand_defconfig @@ -52,9 +52,9 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80200000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80200000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig index e3da5c606c..564382cca7 100644 --- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig @@ -47,7 +47,7 @@ CONFIG_SPL_BSS_START_ADDR=0x8f000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index f30081f25f..f6a220e70f 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -53,7 +53,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1046aqds_nand_defconfig b/configs/ls1046aqds_nand_defconfig index 3487d0611b..543645aa1b 100644 --- a/configs/ls1046aqds_nand_defconfig +++ b/configs/ls1046aqds_nand_defconfig @@ -62,7 +62,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1046aqds_sdcard_ifc_defconfig b/configs/ls1046aqds_sdcard_ifc_defconfig index c1cad2325b..bacd25942a 100644 --- a/configs/ls1046aqds_sdcard_ifc_defconfig +++ b/configs/ls1046aqds_sdcard_ifc_defconfig @@ -63,7 +63,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1046aqds_sdcard_qspi_defconfig b/configs/ls1046aqds_sdcard_qspi_defconfig index 8a3fd1c552..51ad144de7 100644 --- a/configs/ls1046aqds_sdcard_qspi_defconfig +++ b/configs/ls1046aqds_sdcard_qspi_defconfig @@ -63,7 +63,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1046ardb_emmc_defconfig b/configs/ls1046ardb_emmc_defconfig index c4743a9111..f71b2f6c2b 100644 --- a/configs/ls1046ardb_emmc_defconfig +++ b/configs/ls1046ardb_emmc_defconfig @@ -53,7 +53,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1046ardb_qspi_spl_defconfig b/configs/ls1046ardb_qspi_spl_defconfig index a5509ee5a1..84bd1b1d0f 100644 --- a/configs/ls1046ardb_qspi_spl_defconfig +++ b/configs/ls1046ardb_qspi_spl_defconfig @@ -55,13 +55,13 @@ CONFIG_SPL_BSS_START_ADDR=0x8f000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x90000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x90000000 CONFIG_SYS_OS_BASE=0x40980000 CONFIG_SPL_WATCHDOG=y CONFIG_SPL_TARGET="spl/u-boot-spl.pbl" diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig index 70c0c4221e..c9e4593520 100644 --- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig +++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig @@ -50,7 +50,7 @@ CONFIG_SPL_BSS_START_ADDR=0x8f000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1046ardb_sdcard_defconfig b/configs/ls1046ardb_sdcard_defconfig index 166eab5cf0..efde3025e5 100644 --- a/configs/ls1046ardb_sdcard_defconfig +++ b/configs/ls1046ardb_sdcard_defconfig @@ -53,7 +53,7 @@ CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_FSL_PBL=y CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x110 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1088aqds_sdcard_ifc_defconfig b/configs/ls1088aqds_sdcard_ifc_defconfig index e7f093e344..df1788d1ac 100644 --- a/configs/ls1088aqds_sdcard_ifc_defconfig +++ b/configs/ls1088aqds_sdcard_ifc_defconfig @@ -50,7 +50,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1088aqds_sdcard_qspi_defconfig b/configs/ls1088aqds_sdcard_qspi_defconfig index aeb98cd357..dcd40233b7 100644 --- a/configs/ls1088aqds_sdcard_qspi_defconfig +++ b/configs/ls1088aqds_sdcard_qspi_defconfig @@ -51,7 +51,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig index 8cbedab530..4e625cf967 100644 --- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig @@ -51,7 +51,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig index 3218aaf27f..d4b6113c2b 100644 --- a/configs/ls1088ardb_sdcard_qspi_defconfig +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -52,7 +52,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index 09364b2a6e..d796d9fed7 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -42,7 +42,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y diff --git a/configs/ls2080aqds_sdcard_defconfig b/configs/ls2080aqds_sdcard_defconfig index 2edf150017..c561de3428 100644 --- a/configs/ls2080aqds_sdcard_defconfig +++ b/configs/ls2080aqds_sdcard_defconfig @@ -42,7 +42,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig index 4d37fab5cb..efe508090a 100644 --- a/configs/ls2080ardb_nand_defconfig +++ b/configs/ls2080ardb_nand_defconfig @@ -48,7 +48,7 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_SPL_MPC8XXX_INIT_DDR=y diff --git a/configs/mccmon6_nor_defconfig b/configs/mccmon6_nor_defconfig index 6afddd2356..5e8fbd01bf 100644 --- a/configs/mccmon6_nor_defconfig +++ b/configs/mccmon6_nor_defconfig @@ -24,12 +24,12 @@ CONFIG_DISTRO_DEFAULTS=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x18000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x18000000 CONFIG_SYS_OS_BASE=0x8180000 CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 diff --git a/configs/mccmon6_sd_defconfig b/configs/mccmon6_sd_defconfig index c95ee25242..83f2b1a42d 100644 --- a/configs/mccmon6_sd_defconfig +++ b/configs/mccmon6_sd_defconfig @@ -26,7 +26,7 @@ CONFIG_DISTRO_DEFAULTS=y # CONFIG_USE_BOOTCOMMAND is not set CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_BOARD_INIT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_NOR_SUPPORT=y CONFIG_SYS_MAXARGS=32 diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index 8ed0c7abb7..df568ffc1e 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -18,10 +18,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2089 diff --git a/configs/msc_sm2s_imx8mp_defconfig b/configs/msc_sm2s_imx8mp_defconfig index dacbeb72fe..75b49665c7 100644 --- a/configs/msc_sm2s_imx8mp_defconfig +++ b/configs/msc_sm2s_imx8mp_defconfig @@ -34,10 +34,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/mx6cuboxi_defconfig b/configs/mx6cuboxi_defconfig index cf19bd1065..8b19096858 100644 --- a/configs/mx6cuboxi_defconfig +++ b/configs/mx6cuboxi_defconfig @@ -28,7 +28,7 @@ CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_USE_PREBOOT=y CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin serial; setenv stdout serial; setenv stderr serial; fi;" CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y diff --git a/configs/mx6memcal_defconfig b/configs/mx6memcal_defconfig index a488ce41fb..6dd64b6da1 100644 --- a/configs/mx6memcal_defconfig +++ b/configs/mx6memcal_defconfig @@ -15,7 +15,7 @@ CONFIG_SPL=y CONFIG_SYS_MEMTEST_START=0x10000000 CONFIG_SYS_MEMTEST_END=0x20000000 CONFIG_SUPPORT_RAW_INITRD=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y CONFIG_SYS_MAXARGS=32 diff --git a/configs/mx6sabreauto_defconfig b/configs/mx6sabreauto_defconfig index ee518cab6d..deb0b65535 100644 --- a/configs/mx6sabreauto_defconfig +++ b/configs/mx6sabreauto_defconfig @@ -31,7 +31,7 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};if mmc rescan; then if run loa CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" diff --git a/configs/mx6sabresd_defconfig b/configs/mx6sabresd_defconfig index 0a8b0477b4..edc92f804d 100644 --- a/configs/mx6sabresd_defconfig +++ b/configs/mx6sabresd_defconfig @@ -31,7 +31,7 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};if mmc rescan; then if run loa CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_WATCHDOG=y CONFIG_HUSH_PARSER=y diff --git a/configs/mx6slevk_spl_defconfig b/configs/mx6slevk_spl_defconfig index fee3c6fc95..8db45764d5 100644 --- a/configs/mx6slevk_spl_defconfig +++ b/configs/mx6slevk_spl_defconfig @@ -27,7 +27,7 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi" CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y diff --git a/configs/mx6ul_14x14_evk_defconfig b/configs/mx6ul_14x14_evk_defconfig index 0e036606c1..f727423a38 100644 --- a/configs/mx6ul_14x14_evk_defconfig +++ b/configs/mx6ul_14x14_evk_defconfig @@ -29,7 +29,7 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc resc # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y diff --git a/configs/mx6ul_9x9_evk_defconfig b/configs/mx6ul_9x9_evk_defconfig index 740968d98e..1e4ec0b017 100644 --- a/configs/mx6ul_9x9_evk_defconfig +++ b/configs/mx6ul_9x9_evk_defconfig @@ -29,7 +29,7 @@ CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc resc # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y diff --git a/configs/myir_mys_6ulx_defconfig b/configs/myir_mys_6ulx_defconfig index 8e3938dcaa..456d1b8654 100644 --- a/configs/myir_mys_6ulx_defconfig +++ b/configs/myir_mys_6ulx_defconfig @@ -20,7 +20,7 @@ CONFIG_FIT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/novena_defconfig b/configs/novena_defconfig index 3cb0cb8712..278e3fd8ad 100644 --- a/configs/novena_defconfig +++ b/configs/novena_defconfig @@ -32,7 +32,7 @@ CONFIG_BOOTARGS="console=ttymxc1,115200 " CONFIG_BOOTCOMMAND="run distro_bootcmd ; run net_nfs" CONFIG_BOARD_EARLY_INIT_F=y CONFIG_MISC_INIT_R=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y diff --git a/configs/nyan-big_defconfig b/configs/nyan-big_defconfig index 016494e104..c144a08a24 100644 --- a/configs/nyan-big_defconfig +++ b/configs/nyan-big_defconfig @@ -29,10 +29,10 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0xef8100 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra124 (Nyan-big) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2087 diff --git a/configs/omap35_logic_defconfig b/configs/omap35_logic_defconfig index f6652eb438..539b0cfa4f 100644 --- a/configs/omap35_logic_defconfig +++ b/configs/omap35_logic_defconfig @@ -25,8 +25,8 @@ CONFIG_DEFAULT_FDT_FILE="logicpd-torpedo-35xx-devkit.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -36,7 +36,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap35_logic_somlv_defconfig b/configs/omap35_logic_somlv_defconfig index 44a1a9d3ac..f14ce3d23d 100644 --- a/configs/omap35_logic_somlv_defconfig +++ b/configs/omap35_logic_somlv_defconfig @@ -26,8 +26,8 @@ CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-35xx-devkit.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -37,7 +37,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig index d475378110..cabd365938 100644 --- a/configs/omap3_beagle_defconfig +++ b/configs/omap3_beagle_defconfig @@ -19,8 +19,8 @@ CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig index 1aa485048c..33ff39ff54 100644 --- a/configs/omap3_evm_defconfig +++ b/configs/omap3_evm_defconfig @@ -19,8 +19,8 @@ CONFIG_DEFAULT_FDT_FILE="omap3-evm.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig index cc1f418564..7d3d602c9d 100644 --- a/configs/omap3_logic_defconfig +++ b/configs/omap3_logic_defconfig @@ -24,8 +24,8 @@ CONFIG_PREBOOT="setenv preboot;saveenv;" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -35,7 +35,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap3_logic_somlv_defconfig b/configs/omap3_logic_somlv_defconfig index ebf702d974..0141a425e0 100644 --- a/configs/omap3_logic_somlv_defconfig +++ b/configs/omap3_logic_somlv_defconfig @@ -26,8 +26,8 @@ CONFIG_DEFAULT_FDT_FILE="logicpd-som-lv-37xx-devkit.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_SYS_MALLOC_SIMPLE=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set @@ -37,7 +37,7 @@ CONFIG_SPL_NAND_ECC=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SPL_NAND_BASE=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x84000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x84000000 CONFIG_SYS_NAND_SPL_KERNEL_OFFS=0x280000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x1700 diff --git a/configs/omap4_panda_defconfig b/configs/omap4_panda_defconfig index 5571722ea6..d126d2c07b 100644 --- a/configs/omap4_panda_defconfig +++ b/configs/omap4_panda_defconfig @@ -15,8 +15,8 @@ CONFIG_DEFAULT_FDT_FILE="omap4-panda.dtb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_MAX_SIZE=0xbc00 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SPL_FS_EXT4 is not set # CONFIG_SPL_I2C is not set # CONFIG_SPL_NAND_SUPPORT is not set diff --git a/configs/omap4_sdp4430_defconfig b/configs/omap4_sdp4430_defconfig index 0a8a1c77ea..53710351d0 100644 --- a/configs/omap4_sdp4430_defconfig +++ b/configs/omap4_sdp4430_defconfig @@ -19,8 +19,8 @@ CONFIG_DEFAULT_FDT_FILE="omap4-sdp.dtb" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_SPL_MAX_SIZE=0xbc00 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 # CONFIG_SPL_I2C is not set # CONFIG_SPL_NAND_SUPPORT is not set CONFIG_SYS_MAXARGS=64 diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index dec7a4bf31..47feff21bd 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -41,10 +41,10 @@ CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0f70000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x110000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0f70000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x110000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xb5 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/openpiton_riscv64_spl_defconfig b/configs/openpiton_riscv64_spl_defconfig index 9272bf6666..c0ec9ed2bb 100644 --- a/configs/openpiton_riscv64_spl_defconfig +++ b/configs/openpiton_riscv64_spl_defconfig @@ -29,7 +29,7 @@ CONFIG_SPL_BSS_START_ADDR=0x82000000 # CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y # CONFIG_SPL_BANNER_PRINT is not set CONFIG_SPL_CPU=y CONFIG_SPL_FS_EXT4=y diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig index 19d12c1298..6a91b12e9a 100644 --- a/configs/opos6uldev_defconfig +++ b/configs/opos6uldev_defconfig @@ -33,7 +33,7 @@ CONFIG_DEFAULT_FDT_FILE="imx6ul-opos6uldev.dtb" # CONFIG_CONSOLE_MUX is not set CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL_BOARD_INIT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_WATCHDOG=y CONFIG_SPL_YMODEM_SUPPORT=y diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index ad65fa0b1d..9f3893dd60 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -16,10 +16,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Paz00) MOD # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2087 diff --git a/configs/pcm058_defconfig b/configs/pcm058_defconfig index f8b587275f..15ae95e894 100644 --- a/configs/pcm058_defconfig +++ b/configs/pcm058_defconfig @@ -32,7 +32,7 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run mmcboot;run nandboot" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_BOARD_INIT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x18a CONFIG_SPL_DMA=y CONFIG_SPL_FS_EXT4=y diff --git a/configs/phycore-am335x-r2-regor_defconfig b/configs/phycore-am335x-r2-regor_defconfig index 6c316cb386..4bdf882218 100644 --- a/configs/phycore-am335x-r2-regor_defconfig +++ b/configs/phycore-am335x-r2-regor_defconfig @@ -25,8 +25,8 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="am335x-regor-rdk.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_I2C=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/phycore-am335x-r2-wega_defconfig b/configs/phycore-am335x-r2-wega_defconfig index ff204e776b..7644fbec27 100644 --- a/configs/phycore-am335x-r2-wega_defconfig +++ b/configs/phycore-am335x-r2-wega_defconfig @@ -25,8 +25,8 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="am335x-wega-rdk.dtb" CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x800000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x800000 CONFIG_SPL_I2C=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/phycore-imx8mm_defconfig b/configs/phycore-imx8mm_defconfig index 3c22322c38..bff35e739c 100644 --- a/configs/phycore-imx8mm_defconfig +++ b/configs/phycore-imx8mm_defconfig @@ -33,10 +33,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig index af6945d59e..32845fd19f 100644 --- a/configs/phycore-imx8mp_defconfig +++ b/configs/phycore-imx8mp_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/phycore_pcl063_defconfig b/configs/phycore_pcl063_defconfig index 2d06621963..11db9681a8 100644 --- a/configs/phycore_pcl063_defconfig +++ b/configs/phycore_pcl063_defconfig @@ -19,7 +19,7 @@ CONFIG_SYS_MEMTEST_END=0x90000000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 diff --git a/configs/phycore_pcl063_ull_defconfig b/configs/phycore_pcl063_ull_defconfig index 327ea56cb8..f0a2398ebd 100644 --- a/configs/phycore_pcl063_ull_defconfig +++ b/configs/phycore_pcl063_ull_defconfig @@ -19,7 +19,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run mmc_mmc_fit" CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 diff --git a/configs/pico-dwarf-imx6ul_defconfig b/configs/pico-dwarf-imx6ul_defconfig index 4fd588051c..e9a5302cb7 100644 --- a/configs/pico-dwarf-imx6ul_defconfig +++ b/configs/pico-dwarf-imx6ul_defconfig @@ -26,7 +26,7 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-dwarf.dtb" CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTMENU=y diff --git a/configs/pico-dwarf-imx7d_defconfig b/configs/pico-dwarf-imx7d_defconfig index 2cd906a63d..613ed6cc94 100644 --- a/configs/pico-dwarf-imx7d_defconfig +++ b/configs/pico-dwarf-imx7d_defconfig @@ -25,7 +25,7 @@ CONFIG_DEFAULT_FDT_FILE="imx7d-pico-dwarf.dtb" CONFIG_SPL_MAX_SIZE=0xe000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_MAX_SIZE=0x100000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set diff --git a/configs/pico-hobbit-imx6ul_defconfig b/configs/pico-hobbit-imx6ul_defconfig index c430b4d622..b3a1023271 100644 --- a/configs/pico-hobbit-imx6ul_defconfig +++ b/configs/pico-hobbit-imx6ul_defconfig @@ -27,7 +27,7 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-hobbit.dtb" CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTMENU=y diff --git a/configs/pico-hobbit-imx7d_defconfig b/configs/pico-hobbit-imx7d_defconfig index b63281e533..82d70c7f37 100644 --- a/configs/pico-hobbit-imx7d_defconfig +++ b/configs/pico-hobbit-imx7d_defconfig @@ -25,7 +25,7 @@ CONFIG_DEFAULT_FDT_FILE="imx7d-pico-hobbit.dtb" CONFIG_SPL_MAX_SIZE=0xe000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_MAX_SIZE=0x100000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set diff --git a/configs/pico-imx6_defconfig b/configs/pico-imx6_defconfig index be7b119ba7..39aa63c1aa 100644 --- a/configs/pico-imx6_defconfig +++ b/configs/pico-imx6_defconfig @@ -27,7 +27,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTCOMMAND="run default_boot" CONFIG_DEFAULT_FDT_FILE="ask" CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig index a6cbc51331..6f84b6aeb4 100644 --- a/configs/pico-imx6ul_defconfig +++ b/configs/pico-imx6ul_defconfig @@ -27,7 +27,7 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="ask" CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTMENU=y diff --git a/configs/pico-imx7d_bl33_defconfig b/configs/pico-imx7d_bl33_defconfig index 546e1e6545..289cf6ba7c 100644 --- a/configs/pico-imx7d_bl33_defconfig +++ b/configs/pico-imx7d_bl33_defconfig @@ -27,7 +27,7 @@ CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SPL_MAX_SIZE=0xe000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_MAX_SIZE=0x100000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_HUSH_PARSER=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 diff --git a/configs/pico-imx7d_defconfig b/configs/pico-imx7d_defconfig index f11e1f4ef4..dbe4c5245b 100644 --- a/configs/pico-imx7d_defconfig +++ b/configs/pico-imx7d_defconfig @@ -25,7 +25,7 @@ CONFIG_DEFAULT_FDT_FILE="ask" CONFIG_SPL_MAX_SIZE=0xe000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_MAX_SIZE=0x100000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set diff --git a/configs/pico-imx8mq_defconfig b/configs/pico-imx8mq_defconfig index 4ee9b88c32..f2c342eb8f 100644 --- a/configs/pico-imx8mq_defconfig +++ b/configs/pico-imx8mq_defconfig @@ -38,10 +38,10 @@ CONFIG_SPL_BSS_START_ADDR=0x180000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/pico-nymph-imx7d_defconfig b/configs/pico-nymph-imx7d_defconfig index 2cd906a63d..613ed6cc94 100644 --- a/configs/pico-nymph-imx7d_defconfig +++ b/configs/pico-nymph-imx7d_defconfig @@ -25,7 +25,7 @@ CONFIG_DEFAULT_FDT_FILE="imx7d-pico-dwarf.dtb" CONFIG_SPL_MAX_SIZE=0xe000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_MAX_SIZE=0x100000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set diff --git a/configs/pico-pi-imx6ul_defconfig b/configs/pico-pi-imx6ul_defconfig index 3c822d10a4..1eee1e6c2f 100644 --- a/configs/pico-pi-imx6ul_defconfig +++ b/configs/pico-pi-imx6ul_defconfig @@ -27,7 +27,7 @@ CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx6ul-pico-pi.dtb" CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 CONFIG_CMD_BOOTMENU=y diff --git a/configs/pico-pi-imx7d_defconfig b/configs/pico-pi-imx7d_defconfig index 3e26aae400..c5e34219ec 100644 --- a/configs/pico-pi-imx7d_defconfig +++ b/configs/pico-pi-imx7d_defconfig @@ -25,7 +25,7 @@ CONFIG_DEFAULT_FDT_FILE="imx7d-pico-pi.dtb" CONFIG_SPL_MAX_SIZE=0xe000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_MAX_SIZE=0x100000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 # CONFIG_CMD_BOOTD is not set diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 568e15c158..92f433dfd0 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -19,10 +19,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Plutux) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2084 diff --git a/configs/pxm2_defconfig b/configs/pxm2_defconfig index a426bf1eed..2ea007d0de 100644 --- a/configs/pxm2_defconfig +++ b/configs/pxm2_defconfig @@ -37,9 +37,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_BSS_START_ADDR=0x80000000 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/qemu-riscv32_spl_defconfig b/configs/qemu-riscv32_spl_defconfig index 9a81bdd767..e63d6fd934 100644 --- a/configs/qemu-riscv32_spl_defconfig +++ b/configs/qemu-riscv32_spl_defconfig @@ -18,7 +18,7 @@ CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_SPL_MAX_SIZE=0x100000 CONFIG_SPL_BSS_START_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 CONFIG_SYS_BOOTM_LEN=0x4000000 diff --git a/configs/qemu-riscv64_spl_defconfig b/configs/qemu-riscv64_spl_defconfig index bb10145e6e..b048bb8aed 100644 --- a/configs/qemu-riscv64_spl_defconfig +++ b/configs/qemu-riscv64_spl_defconfig @@ -17,7 +17,7 @@ CONFIG_DISPLAY_CPUINFO=y CONFIG_DISPLAY_BOARDINFO=y CONFIG_SPL_MAX_SIZE=0x100000 CONFIG_SPL_BSS_START_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 CONFIG_SYS_BOOTM_LEN=0x4000000 diff --git a/configs/rastaban_defconfig b/configs/rastaban_defconfig index 7df30f80a2..9f538a2f83 100644 --- a/configs/rastaban_defconfig +++ b/configs/rastaban_defconfig @@ -37,9 +37,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_BSS_START_ADDR=0x80000000 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig index cdec0c52e6..b4666d0e90 100644 --- a/configs/ringneck-px30_defconfig +++ b/configs/ringneck-px30_defconfig @@ -42,7 +42,7 @@ CONFIG_SPL_BOOTROM_SUPPORT=y # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200 CONFIG_SPL_ATF=y # CONFIG_TPL_FRAMEWORK is not set diff --git a/configs/riotboard_defconfig b/configs/riotboard_defconfig index 98fef09e18..6ab405d7f9 100644 --- a/configs/riotboard_defconfig +++ b/configs/riotboard_defconfig @@ -30,12 +30,12 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_RAW_IMAGE_SUPPORT=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_FS_LOAD_ARGS_NAME="imx6dl-riotboard.dtb" CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x13000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x13000000 CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 CONFIG_CMD_GPIO=y diff --git a/configs/rut_defconfig b/configs/rut_defconfig index b4a78f5062..ccf25667b5 100644 --- a/configs/rut_defconfig +++ b/configs/rut_defconfig @@ -37,9 +37,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_BSS_START_ADDR=0x80000000 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/sama5d27_giantboard_defconfig b/configs/sama5d27_giantboard_defconfig index e58b454250..677658dca1 100644 --- a/configs/sama5d27_giantboard_defconfig +++ b/configs/sama5d27_giantboard_defconfig @@ -46,8 +46,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d27_som1_ek_mmc1_defconfig b/configs/sama5d27_som1_ek_mmc1_defconfig index 65466ebb5c..ec82311b16 100644 --- a/configs/sama5d27_som1_ek_mmc1_defconfig +++ b/configs/sama5d27_som1_ek_mmc1_defconfig @@ -43,8 +43,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d27_som1_ek_mmc_defconfig b/configs/sama5d27_som1_ek_mmc_defconfig index cb47dc6baa..f303744514 100644 --- a/configs/sama5d27_som1_ek_mmc_defconfig +++ b/configs/sama5d27_som1_ek_mmc_defconfig @@ -44,8 +44,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d27_som1_ek_qspiflash_defconfig b/configs/sama5d27_som1_ek_qspiflash_defconfig index 702495e1c9..eed190d2ef 100644 --- a/configs/sama5d27_som1_ek_qspiflash_defconfig +++ b/configs/sama5d27_som1_ek_qspiflash_defconfig @@ -42,8 +42,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d27_wlsom1_ek_mmc_defconfig b/configs/sama5d27_wlsom1_ek_mmc_defconfig index 7921009012..2b8461da1c 100644 --- a/configs/sama5d27_wlsom1_ek_mmc_defconfig +++ b/configs/sama5d27_wlsom1_ek_mmc_defconfig @@ -43,8 +43,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_DISPLAY_PRINT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_AT91_MCK_BYPASS=y diff --git a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig index a7c84746e3..f47183ae5c 100644 --- a/configs/sama5d27_wlsom1_ek_qspiflash_defconfig +++ b/configs/sama5d27_wlsom1_ek_qspiflash_defconfig @@ -43,8 +43,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_DISPLAY_PRINT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_DM_SPI_FLASH=y diff --git a/configs/sama5d2_icp_mmc_defconfig b/configs/sama5d2_icp_mmc_defconfig index 9456b9e1e1..7ad94ecbde 100644 --- a/configs/sama5d2_icp_mmc_defconfig +++ b/configs/sama5d2_icp_mmc_defconfig @@ -44,8 +44,8 @@ CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_DISPLAY_PRINT=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_RAM_SUPPORT=y diff --git a/configs/sama5d2_xplained_emmc_defconfig b/configs/sama5d2_xplained_emmc_defconfig index 9ef0ff4aa9..7c373360a9 100644 --- a/configs/sama5d2_xplained_emmc_defconfig +++ b/configs/sama5d2_xplained_emmc_defconfig @@ -43,8 +43,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig index aed9edafdf..26b281f708 100644 --- a/configs/sama5d2_xplained_mmc_defconfig +++ b/configs/sama5d2_xplained_mmc_defconfig @@ -45,8 +45,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d2_xplained_qspiflash_defconfig b/configs/sama5d2_xplained_qspiflash_defconfig index c9a20723f5..9ed35e3113 100644 --- a/configs/sama5d2_xplained_qspiflash_defconfig +++ b/configs/sama5d2_xplained_qspiflash_defconfig @@ -46,8 +46,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig index c01a0c4cc7..b87a63f2d2 100644 --- a/configs/sama5d2_xplained_spiflash_defconfig +++ b/configs/sama5d2_xplained_spiflash_defconfig @@ -47,8 +47,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig index 9b4affe1c4..fc0de8c3e8 100644 --- a/configs/sama5d3_xplained_mmc_defconfig +++ b/configs/sama5d3_xplained_mmc_defconfig @@ -42,8 +42,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d3_xplained_nandflash_defconfig b/configs/sama5d3_xplained_nandflash_defconfig index 2fcb2b75e8..a1b6122f8e 100644 --- a/configs/sama5d3_xplained_nandflash_defconfig +++ b/configs/sama5d3_xplained_nandflash_defconfig @@ -39,8 +39,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y diff --git a/configs/sama5d3xek_mmc_defconfig b/configs/sama5d3xek_mmc_defconfig index bfe19e0169..631e85ea05 100644 --- a/configs/sama5d3xek_mmc_defconfig +++ b/configs/sama5d3xek_mmc_defconfig @@ -44,8 +44,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d3xek_nandflash_defconfig b/configs/sama5d3xek_nandflash_defconfig index 2978a7e2d7..6278a6c68a 100644 --- a/configs/sama5d3xek_nandflash_defconfig +++ b/configs/sama5d3xek_nandflash_defconfig @@ -41,8 +41,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y diff --git a/configs/sama5d3xek_spiflash_defconfig b/configs/sama5d3xek_spiflash_defconfig index 1d30843e08..5f47f8b6ba 100644 --- a/configs/sama5d3xek_spiflash_defconfig +++ b/configs/sama5d3xek_spiflash_defconfig @@ -44,8 +44,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 diff --git a/configs/sama5d4_xplained_mmc_defconfig b/configs/sama5d4_xplained_mmc_defconfig index befe26b18e..9f0349e7f5 100644 --- a/configs/sama5d4_xplained_mmc_defconfig +++ b/configs/sama5d4_xplained_mmc_defconfig @@ -44,8 +44,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d4_xplained_nandflash_defconfig b/configs/sama5d4_xplained_nandflash_defconfig index 749c8ba30e..d12f749d7f 100644 --- a/configs/sama5d4_xplained_nandflash_defconfig +++ b/configs/sama5d4_xplained_nandflash_defconfig @@ -41,8 +41,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y diff --git a/configs/sama5d4_xplained_spiflash_defconfig b/configs/sama5d4_xplained_spiflash_defconfig index 02a0de3ed2..0d239ef000 100644 --- a/configs/sama5d4_xplained_spiflash_defconfig +++ b/configs/sama5d4_xplained_spiflash_defconfig @@ -46,8 +46,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 diff --git a/configs/sama5d4ek_mmc_defconfig b/configs/sama5d4ek_mmc_defconfig index 48607e1ca4..4139fcfadb 100644 --- a/configs/sama5d4ek_mmc_defconfig +++ b/configs/sama5d4ek_mmc_defconfig @@ -44,8 +44,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_HUSH_PARSER=y CONFIG_SYS_CBSIZE=256 CONFIG_SYS_PBSIZE=276 diff --git a/configs/sama5d4ek_nandflash_defconfig b/configs/sama5d4ek_nandflash_defconfig index 60c936b047..27bfcdf008 100644 --- a/configs/sama5d4ek_nandflash_defconfig +++ b/configs/sama5d4ek_nandflash_defconfig @@ -41,8 +41,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_BASE=y diff --git a/configs/sama5d4ek_spiflash_defconfig b/configs/sama5d4ek_spiflash_defconfig index aee8169fdc..f41c4e9edd 100644 --- a/configs/sama5d4ek_spiflash_defconfig +++ b/configs/sama5d4ek_spiflash_defconfig @@ -44,8 +44,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000 diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 4fdc46fef1..5a332b1a06 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -17,10 +17,10 @@ CONFIG_USE_PREBOOT=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2086 diff --git a/configs/seeed_npi_imx6ull_defconfig b/configs/seeed_npi_imx6ull_defconfig index 9dec10ef39..d4f2a88ee4 100644 --- a/configs/seeed_npi_imx6ull_defconfig +++ b/configs/seeed_npi_imx6ull_defconfig @@ -21,7 +21,7 @@ CONFIG_FIT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DMA=y CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_WATCHDOG=y diff --git a/configs/sifive_unleashed_defconfig b/configs/sifive_unleashed_defconfig index f9f03463ee..f99ce30b91 100644 --- a/configs/sifive_unleashed_defconfig +++ b/configs/sifive_unleashed_defconfig @@ -29,7 +29,7 @@ CONFIG_MISC_INIT_R=y CONFIG_SPL_MAX_SIZE=0x100000 CONFIG_SPL_BSS_START_ADDR=0x85000000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/sifive_unmatched_defconfig b/configs/sifive_unmatched_defconfig index 71c0fb3932..6a95ab3977 100644 --- a/configs/sifive_unmatched_defconfig +++ b/configs/sifive_unmatched_defconfig @@ -35,7 +35,7 @@ CONFIG_PCI_INIT_R=y CONFIG_SPL_MAX_SIZE=0x100000 CONFIG_SPL_BSS_START_ADDR=0x85000000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_DM_SPI_FLASH=y CONFIG_SPL_DM_RESET=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig index 29153def72..10cbccb69b 100644 --- a/configs/smartweb_defconfig +++ b/configs/smartweb_defconfig @@ -40,8 +40,8 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x20000000 CONFIG_SPL_BSS_MAX_SIZE=0x4000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x460000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x460000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig index 02b92719f0..3e96daf37c 100644 --- a/configs/sniper_defconfig +++ b/configs/sniper_defconfig @@ -17,9 +17,9 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SPL_MAX_SIZE=0xec00 CONFIG_SPL_BSS_START_ADDR=0x80000000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2 diff --git a/configs/socfpga_agilex_atf_defconfig b/configs/socfpga_agilex_atf_defconfig index 2377885395..7d8b0cc07b 100644 --- a/configs/socfpga_agilex_atf_defconfig +++ b/configs/socfpga_agilex_atf_defconfig @@ -34,10 +34,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x3ff00000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x3fa00000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 diff --git a/configs/socfpga_agilex_defconfig b/configs/socfpga_agilex_defconfig index 8ec32ab8f2..554b2f924c 100644 --- a/configs/socfpga_agilex_defconfig +++ b/configs/socfpga_agilex_defconfig @@ -32,10 +32,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x3ff00000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x3fa00000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x3c00000 diff --git a/configs/socfpga_agilex_vab_defconfig b/configs/socfpga_agilex_vab_defconfig index 0b09bd1d49..230944159e 100644 --- a/configs/socfpga_agilex_vab_defconfig +++ b/configs/socfpga_agilex_vab_defconfig @@ -35,10 +35,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x3ff00000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x3fa00000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 diff --git a/configs/socfpga_arria10_defconfig b/configs/socfpga_arria10_defconfig index 050a3535e0..c35a360a55 100644 --- a/configs/socfpga_arria10_defconfig +++ b/configs/socfpga_arria10_defconfig @@ -30,10 +30,10 @@ CONFIG_CLOCKS=y CONFIG_SPL_PAD_TO=0x40000 CONFIG_SPL_NO_BSS_LIMIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xffe2b000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x15000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xffe2b000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x15000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FPGA=y CONFIG_SYS_MAXARGS=32 diff --git a/configs/socfpga_chameleonv3_defconfig b/configs/socfpga_chameleonv3_defconfig index 441942c2f2..457ad4b297 100644 --- a/configs/socfpga_chameleonv3_defconfig +++ b/configs/socfpga_chameleonv3_defconfig @@ -14,10 +14,10 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_MISC_INIT_R=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_NO_BSS_LIMIT=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xffe2b000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x15000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xffe2b000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x15000 CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FPGA=y diff --git a/configs/socfpga_n5x_atf_defconfig b/configs/socfpga_n5x_atf_defconfig index 7af9e00c72..8868595e59 100644 --- a/configs/socfpga_n5x_atf_defconfig +++ b/configs/socfpga_n5x_atf_defconfig @@ -33,10 +33,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x3ff00000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x3fa00000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 diff --git a/configs/socfpga_n5x_defconfig b/configs/socfpga_n5x_defconfig index 2b1af2faf0..ee05c1b7aa 100644 --- a/configs/socfpga_n5x_defconfig +++ b/configs/socfpga_n5x_defconfig @@ -29,10 +29,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x3ff00000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x3fa00000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x3c00000 diff --git a/configs/socfpga_n5x_vab_defconfig b/configs/socfpga_n5x_vab_defconfig index c9bf337d23..0af212e94e 100644 --- a/configs/socfpga_n5x_vab_defconfig +++ b/configs/socfpga_n5x_vab_defconfig @@ -34,10 +34,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x3ff00000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x3fa00000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_CACHE=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 diff --git a/configs/socfpga_stratix10_atf_defconfig b/configs/socfpga_stratix10_atf_defconfig index d1d2ec4ec3..2806b06185 100644 --- a/configs/socfpga_stratix10_atf_defconfig +++ b/configs/socfpga_stratix10_atf_defconfig @@ -34,10 +34,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x3ff00000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x3fa00000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x02000000 CONFIG_SPL_ATF=y diff --git a/configs/socfpga_stratix10_defconfig b/configs/socfpga_stratix10_defconfig index 31d1868c3d..c782c814b2 100644 --- a/configs/socfpga_stratix10_defconfig +++ b/configs/socfpga_stratix10_defconfig @@ -34,10 +34,10 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x3ff00000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x500000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x3fa00000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x500000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x3C00000 CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex" diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig index 9c645d7232..6590727fe7 100644 --- a/configs/starfive_visionfive2_defconfig +++ b/configs/starfive_visionfive2_defconfig @@ -49,10 +49,10 @@ CONFIG_SPL_PAD_TO=0x0 CONFIG_SPL_BSS_START_ADDR=0x8040000 CONFIG_SPL_BSS_MAX_SIZE=0x10000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x400000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x400000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2 CONFIG_SPL_I2C=y diff --git a/configs/stm32746g-eval_spl_defconfig b/configs/stm32746g-eval_spl_defconfig index 6f2f5ec360..3864e21a18 100644 --- a/configs/stm32746g-eval_spl_defconfig +++ b/configs/stm32746g-eval_spl_defconfig @@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PROMPT="U-Boot > " CONFIG_SYS_PBSIZE=1050 diff --git a/configs/stm32f746-disco_spl_defconfig b/configs/stm32f746-disco_spl_defconfig index 1b8b5a17b7..b2a786121c 100644 --- a/configs/stm32f746-disco_spl_defconfig +++ b/configs/stm32f746-disco_spl_defconfig @@ -36,7 +36,7 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x80c0000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x80c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PROMPT="U-Boot > " CONFIG_SYS_PBSIZE=1050 diff --git a/configs/stm32f769-disco_spl_defconfig b/configs/stm32f769-disco_spl_defconfig index 9b926b2218..3462203221 100644 --- a/configs/stm32f769-disco_spl_defconfig +++ b/configs/stm32f769-disco_spl_defconfig @@ -35,7 +35,7 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_XIP_SUPPORT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x81c0000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x81c0000 CONFIG_SPL_DM_RESET=y CONFIG_SYS_PROMPT="U-Boot > " CONFIG_SYS_PBSIZE=1050 diff --git a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig index defe07c495..20e4cc3880 100644 --- a/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-ctouch2_defconfig @@ -21,10 +21,10 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig index d12a5efff9..ad4355bf8c 100644 --- a/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig +++ b/configs/stm32mp15-icore-stm32mp1-edimm2.2_defconfig @@ -21,10 +21,10 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig index fc23a8c2b2..1f2ec0c719 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig @@ -21,10 +21,10 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig index a9996e37c1..8b33fd672f 100644 --- a/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig +++ b/configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig @@ -21,10 +21,10 @@ CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig index 67258e27ce..6df0935240 100644 --- a/configs/stm32mp15_basic_defconfig +++ b/configs/stm32mp15_basic_defconfig @@ -32,10 +32,10 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x3db00 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig index 630c1752fc..b6cd0a47fa 100644 --- a/configs/stm32mp15_dhcom_basic_defconfig +++ b/configs/stm32mp15_dhcom_basic_defconfig @@ -39,10 +39,10 @@ CONFIG_SPL_MAX_FOOTPRINT=0x3db00 CONFIG_SPL_BOOTCOUNT_LIMIT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig index 26924a0c2f..d1acf9c657 100644 --- a/configs/stm32mp15_dhcor_basic_defconfig +++ b/configs/stm32mp15_dhcor_basic_defconfig @@ -37,10 +37,10 @@ CONFIG_SPL_MAX_FOOTPRINT=0x3db00 CONFIG_SPL_BOOTCOUNT_LIMIT=y CONFIG_SPL_LEGACY_IMAGE_FORMAT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0xc0300000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1d00000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0xc0300000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1d00000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3 CONFIG_SPL_ENV_SUPPORT=y diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index bf23454825..78cbaa7a0b 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -28,11 +28,11 @@ CONFIG_SPL_BSS_START_ADDR=0x100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb" CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x10000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x10000000 CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=2071 CONFIG_SYS_BOOTM_LEN=0x3c00000 diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index f2c148ef54..cc5755178b 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -48,10 +48,10 @@ CONFIG_SPL_BSS_MAX_SIZE=0x600 # CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20ba0000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x460000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x20ba0000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x460000 CONFIG_SPL_NAND_SUPPORT=y CONFIG_SPL_NAND_RAW_ONLY=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index 48ab49b1f6..fdda5e49ac 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -20,10 +20,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (TEC-NG) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2084 diff --git a/configs/tec_defconfig b/configs/tec_defconfig index bcdd7c12e7..cc2256bd46 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -18,10 +18,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (TEC) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2081 diff --git a/configs/thuban_defconfig b/configs/thuban_defconfig index 8d79e413b0..116700e0df 100644 --- a/configs/thuban_defconfig +++ b/configs/thuban_defconfig @@ -37,9 +37,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_BSS_START_ADDR=0x80000000 -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000 CONFIG_SPL_I2C=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig index cbec3a06f1..8ba29d79b0 100644 --- a/configs/topic_miami_defconfig +++ b/configs/topic_miami_defconfig @@ -32,8 +32,8 @@ CONFIG_SPL_BSS_START_ADDR=0x100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 CONFIG_SYS_PROMPT="zynq-uboot> " diff --git a/configs/topic_miamilite_defconfig b/configs/topic_miamilite_defconfig index 71f830d804..8d37d05bcc 100644 --- a/configs/topic_miamilite_defconfig +++ b/configs/topic_miamilite_defconfig @@ -32,8 +32,8 @@ CONFIG_SPL_BSS_START_ADDR=0x100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 CONFIG_SYS_PROMPT="zynq-uboot> " diff --git a/configs/topic_miamiplus_defconfig b/configs/topic_miamiplus_defconfig index fd7bbe3e03..fd89c25f25 100644 --- a/configs/topic_miamiplus_defconfig +++ b/configs/topic_miamiplus_defconfig @@ -32,8 +32,8 @@ CONFIG_SPL_BSS_START_ADDR=0x100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000 CONFIG_SYS_PROMPT="zynq-uboot> " diff --git a/configs/transformer_t30_defconfig b/configs/transformer_t30_defconfig index 576b00b82a..8e03a60658 100644 --- a/configs/transformer_t30_defconfig +++ b/configs/transformer_t30_defconfig @@ -24,10 +24,10 @@ CONFIG_BOOTCOMMAND="setenv gpio_button 150; if run check_button; then poweroff; CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (Transformer) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2084 diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index f554df1a46..b84a78bf93 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -20,10 +20,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (TrimSlice) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2087 diff --git a/configs/udoo_defconfig b/configs/udoo_defconfig index ab8cb489db..e128a62cd0 100644 --- a/configs/udoo_defconfig +++ b/configs/udoo_defconfig @@ -23,7 +23,7 @@ CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y diff --git a/configs/udoo_neo_defconfig b/configs/udoo_neo_defconfig index e06de7be68..853472f4f4 100644 --- a/configs/udoo_neo_defconfig +++ b/configs/udoo_neo_defconfig @@ -21,7 +21,7 @@ CONFIG_SPL_LIBDISK_SUPPORT=y # CONFIG_CMD_BMODE is not set CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd" -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" diff --git a/configs/variscite_dart6ul_defconfig b/configs/variscite_dart6ul_defconfig index 1cfa3421fd..1cf4a8fe56 100644 --- a/configs/variscite_dart6ul_defconfig +++ b/configs/variscite_dart6ul_defconfig @@ -19,7 +19,7 @@ CONFIG_FIT=y CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=3 CONFIG_BOOTCOMMAND="run mmc_mmc_fit" -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_WATCHDOG=y CONFIG_SYS_MAXARGS=32 CONFIG_SYS_PBSIZE=532 diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index bd8ca4d53a..f01bd7a3d8 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -20,10 +20,10 @@ CONFIG_SYS_STDIO_DEREGISTER=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra124 (Venice2) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2086 diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index ef1c6f3897..6f40400a8c 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -17,10 +17,10 @@ CONFIG_USE_PREBOOT=y CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra20 (Ventana) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2085 diff --git a/configs/verdin-am62_r5_defconfig b/configs/verdin-am62_r5_defconfig index 878195a61a..794b6216b9 100644 --- a/configs/verdin-am62_r5_defconfig +++ b/configs/verdin-am62_r5_defconfig @@ -38,10 +38,10 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x140000 CONFIG_SPL_SEPARATE_BSS=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x84000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_EARLY_BSS=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400 diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig index b905b85cd7..392a582092 100644 --- a/configs/verdin-imx8mm_defconfig +++ b/configs/verdin-imx8mm_defconfig @@ -42,10 +42,10 @@ CONFIG_SPL_BSS_START_ADDR=0x910000 CONFIG_SPL_BSS_MAX_SIZE=0x2000 CONFIG_SPL_BOARD_INIT=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig index efdebe8f55..bb20a2227f 100644 --- a/configs/verdin-imx8mp_defconfig +++ b/configs/verdin-imx8mp_defconfig @@ -52,10 +52,10 @@ CONFIG_SPL_BOARD_INIT=y CONFIG_SPL_BOOTROM_SUPPORT=y CONFIG_SPL_SYS_MALLOC_SIMPLE=y # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x80000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x80000 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300 CONFIG_SPL_I2C=y diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig index cbb82593d0..e5d34959fc 100644 --- a/configs/vining_2000_defconfig +++ b/configs/vining_2000_defconfig @@ -33,7 +33,7 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="run distro_bootcmd" CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" CONFIG_SPL_I2C=y diff --git a/configs/vyasa-rk3288_defconfig b/configs/vyasa-rk3288_defconfig index 9bca6fe2ee..0ae901a723 100644 --- a/configs/vyasa-rk3288_defconfig +++ b/configs/vyasa-rk3288_defconfig @@ -32,7 +32,7 @@ CONFIG_SPL_NO_BSS_LIMIT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000 CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0xffe5000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0xffe5000 CONFIG_SPL_FALCON_BOOT_MMCSD=y CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x8800 CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR=0x8000 diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index 0493ef2f67..7c1727f8b1 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -33,7 +33,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_SYS_SPL_MALLOC=y +CONFIG_SPL_SYS_MALLOC=y CONFIG_SPL_FIT_IMAGE_TINY=y CONFIG_SPL_FS_EXT4=y CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img" diff --git a/configs/x3_t30_defconfig b/configs/x3_t30_defconfig index 04d7a8c5e7..a151f58524 100644 --- a/configs/x3_t30_defconfig +++ b/configs/x3_t30_defconfig @@ -25,10 +25,10 @@ CONFIG_BOOTCOMMAND="if run check_button; then bootmenu; fi; run bootcmd_mmc1; ru CONFIG_SPL_FOOTPRINT_LIMIT=y CONFIG_SPL_MAX_FOOTPRINT=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x10000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80090000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 CONFIG_SYS_PROMPT="Tegra30 (x3) # " CONFIG_SYS_MAXARGS=64 CONFIG_SYS_PBSIZE=2084 diff --git a/configs/xilinx_zynq_virt_defconfig b/configs/xilinx_zynq_virt_defconfig index bc1a1766f1..817fb4142d 100644 --- a/configs/xilinx_zynq_virt_defconfig +++ b/configs/xilinx_zynq_virt_defconfig @@ -37,13 +37,13 @@ CONFIG_SPL_BSS_START_ADDR=0x100000 CONFIG_SPL_BSS_MAX_SIZE=0x100000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb" CONFIG_SPL_FPGA=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x10000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x10000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 CONFIG_SYS_MAXARGS=32 diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig index cf7c7eda8c..72b1ad4660 100644 --- a/configs/xilinx_zynqmp_mini_emmc0_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig @@ -26,10 +26,10 @@ CONFIG_CLOCKS=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x20000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_MAXARGS=64 diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig index a4a43b58a8..310aad445a 100644 --- a/configs/xilinx_zynqmp_mini_emmc1_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig @@ -26,10 +26,10 @@ CONFIG_CLOCKS=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x20000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set CONFIG_SYS_MAXARGS=64 diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index 5724cc1708..a1adfb9e5d 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -27,10 +27,10 @@ CONFIG_CLOCKS=y CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x20000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig index 20979a7a10..b284494092 100644 --- a/configs/xilinx_zynqmp_virt_defconfig +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -35,15 +35,15 @@ CONFIG_SPL_MAX_SIZE=0x40000 CONFIG_SPL_BSS_MAX_SIZE=0x80000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x20000000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x1000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x20000000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000 CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub" CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin" CONFIG_SPL_FPGA=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_SPL_ARGS_ADDR=0x8000000 +CONFIG_SPL_PAYLOAD_ARGS_ADDR=0x8000000 CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_SPI_LOAD=y diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig index 64cdffbb9a..19f653f40d 100644 --- a/configs/zynq_cse_nand_defconfig +++ b/configs/zynq_cse_nand_defconfig @@ -28,10 +28,10 @@ CONFIG_SPL_BSS_START_ADDR=0x20000 CONFIG_SPL_BSS_MAX_SIZE=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig index 54620b2382..64df1f0b83 100644 --- a/configs/zynq_cse_nor_defconfig +++ b/configs/zynq_cse_nor_defconfig @@ -28,10 +28,10 @@ CONFIG_SPL_BSS_START_ADDR=0x20000 CONFIG_SPL_BSS_MAX_SIZE=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig index d0200ef88b..9368fb4ffb 100644 --- a/configs/zynq_cse_qspi_defconfig +++ b/configs/zynq_cse_qspi_defconfig @@ -35,10 +35,10 @@ CONFIG_SPL_BSS_START_ADDR=0x20000 CONFIG_SPL_BSS_MAX_SIZE=0x8000 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set CONFIG_SPL_STACK_R=y -CONFIG_SYS_SPL_MALLOC=y -CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y -CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x200000 -CONFIG_SYS_SPL_MALLOC_SIZE=0x2000000 +CONFIG_SPL_SYS_MALLOC=y +CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y +CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x200000 +CONFIG_SPL_SYS_MALLOC_SIZE=0x2000000 CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 # CONFIG_CMDLINE_EDITING is not set diff --git a/doc/arch/sandbox/sandbox.rst b/doc/arch/sandbox/sandbox.rst index a3631de749..23902dee89 100644 --- a/doc/arch/sandbox/sandbox.rst +++ b/doc/arch/sandbox/sandbox.rst @@ -614,8 +614,8 @@ that are mapped into that memory: ======= ======================== =============================== Addr Config Usage ======= ======================== =============================== - 0 CONFIG_SYS_FDT_LOAD_ADDR Device tree - c000 CONFIG_BLOBLIST_ADDR Blob list + 100 CONFIG_SYS_FDT_LOAD_ADDR Device tree + b000 CONFIG_BLOBLIST_ADDR Blob list 10000 CFG_MALLOC_F_ADDR Early memory allocation f0000 CONFIG_PRE_CON_BUF_ADDR Pre-console buffer 100000 CONFIG_TRACE_EARLY_ADDR Early trace buffer (if enabled). Also used diff --git a/doc/develop/falcon.rst b/doc/develop/falcon.rst index a569d1a295..2f25fc8532 100644 --- a/doc/develop/falcon.rst +++ b/doc/develop/falcon.rst @@ -63,7 +63,7 @@ CONFIG_CMD_SPL Enable the "spl export" command. The command "spl export" is then available in U-Boot mode. -CONFIG_SYS_SPL_ARGS_ADDR +CONFIG_SPL_PAYLOAD_ARGS_ADDR Address in RAM where the parameters must be copied by SPL. In most cases, it is <start_of_ram> + 0x100. diff --git a/doc/usage/cmd/bdinfo.rst b/doc/usage/cmd/bdinfo.rst index b287d0ff73..5261085a06 100644 --- a/doc/usage/cmd/bdinfo.rst +++ b/doc/usage/cmd/bdinfo.rst @@ -106,7 +106,7 @@ sp start Early malloc usage amount of memory used in the early malloc memory and its maximum size - as defined by CONFIGSYS_MALLOC_F_LEN + as defined by CONFIG_SYS_MALLOC_F_LEN Configuration ------------- diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig index f0d848f45d..fe5c41d57e 100644 --- a/drivers/core/Kconfig +++ b/drivers/core/Kconfig @@ -14,7 +14,7 @@ config SPL_DM help Enable driver model in SPL. You will need to provide a suitable malloc() implementation. If you are not using the - full malloc() enabled by CFG_SYS_SPL_MALLOC_START, + full malloc() enabled by CFG_SPL_SYS_MALLOC_START, consider using CONFIG_SPL_SYS_MALLOC_SIMPLE. In that case you must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. In most cases driver model will only allocate a few uclasses @@ -27,12 +27,12 @@ config TPL_DM help Enable driver model in TPL. You will need to provide a suitable malloc() implementation. If you are not using the - full malloc() enabled by CFG_SYS_SPL_MALLOC_START, + full malloc() enabled by CFG_TPL_SYS_MALLOC_START, consider using CONFIG_TPL_SYS_MALLOC_SIMPLE. In that case you - must provide CONFIG_SPL_SYS_MALLOC_F_LEN to set the size. + must provide CONFIG_TPL_SYS_MALLOC_F_LEN to set the size. In most cases driver model will only allocate a few uclasses - and devices in SPL, so 1KB should be enough. See - CONFIG_SPL_SYS_MALLOC_F_LEN for more details on how to enable it. + and devices in TPL, so 1KB should be enough. See + CONFIG_TPL_SYS_MALLOC_F_LEN for more details on how to enable it. Disable this for very small implementations. config VPL_DM @@ -42,8 +42,8 @@ config VPL_DM help Enable driver model in VPL. You will need to provide a suitable malloc() implementation. If you are not using the - full malloc() enabled by CFG_SYS_SPL_MALLOC_START, - consider using CONFIG_SPL_SYS_MALLOC_SIMPLE. + full malloc() enabled by CFG_TPL_SYS_MALLOC_START, + consider using CONFIG_TPL_SYS_MALLOC_SIMPLE. config DM_WARN bool "Enable warnings in driver model" diff --git a/drivers/core/fdtaddr.c b/drivers/core/fdtaddr.c index 546db675aa..b79d138c41 100644 --- a/drivers/core/fdtaddr.c +++ b/drivers/core/fdtaddr.c @@ -215,7 +215,7 @@ void *devfdt_map_physmem(const struct udevice *dev, unsigned long size) return map_physmem(addr, size, MAP_NOCACHE); } -fdt_addr_t devfdt_get_addr_pci(const struct udevice *dev) +fdt_addr_t devfdt_get_addr_pci(const struct udevice *dev, fdt_size_t *sizep) { ulong addr; @@ -226,12 +226,12 @@ fdt_addr_t devfdt_get_addr_pci(const struct udevice *dev) int ret; ret = ofnode_read_pci_addr(dev_ofnode(dev), FDT_PCI_SPACE_MEM32, - "reg", &pci_addr); + "reg", &pci_addr, sizep); if (ret) { /* try if there is any i/o-mapped register */ ret = ofnode_read_pci_addr(dev_ofnode(dev), FDT_PCI_SPACE_IO, "reg", - &pci_addr); + &pci_addr, sizep); if (ret) return FDT_ADDR_T_NONE; } diff --git a/drivers/core/of_access.c b/drivers/core/of_access.c index 1bb4d8eab7..c8db743f52 100644 --- a/drivers/core/of_access.c +++ b/drivers/core/of_access.c @@ -1040,3 +1040,68 @@ int of_add_subnode(struct device_node *parent, const char *name, int len, return 0; } + +int __of_remove_property(struct device_node *np, struct property *prop) +{ + struct property **next; + + for (next = &np->properties; *next; next = &(*next)->next) { + if (*next == prop) + break; + } + if (!*next) + return -ENODEV; + + /* found the node */ + *next = prop->next; + + return 0; +} + +int of_remove_property(struct device_node *np, struct property *prop) +{ + int rc; + + mutex_lock(&of_mutex); + + rc = __of_remove_property(np, prop); + + mutex_unlock(&of_mutex); + + return rc; +} + +int of_remove_node(struct device_node *to_remove) +{ + struct device_node *parent = to_remove->parent; + struct device_node *np, *prev; + + if (!parent) + return -EPERM; + prev = NULL; + __for_each_child_of_node(parent, np) { + if (np == to_remove) + break; + prev = np; + } + if (!np) + return -EFAULT; + + /* if there is a previous node, link it to this one's sibling */ + if (prev) + prev->sibling = np->sibling; + else + parent->child = np->sibling; + + /* + * don't free it, since if this is an unflattened tree, all the memory + * was alloced in one block; this pointer will be somewhere in the + * middle of that + * + * TODO(sjg@chromium.org): Consider marking nodes as 'allocated'? + * + * free(np); + */ + + return 0; +} diff --git a/drivers/core/ofnode.c b/drivers/core/ofnode.c index 2cafa7bca5..29a4294510 100644 --- a/drivers/core/ofnode.c +++ b/drivers/core/ofnode.c @@ -47,6 +47,17 @@ static int oftree_find(const void *fdt) return -1; } +static int check_tree_count(void) +{ + if (oftree_count == CONFIG_OFNODE_MULTI_TREE_MAX) { + log_warning("Too many registered device trees (max %d)\n", + CONFIG_OFNODE_MULTI_TREE_MAX); + return -E2BIG; + } + + return 0; +} + static oftree oftree_ensure(void *fdt) { oftree tree; @@ -69,11 +80,8 @@ static oftree oftree_ensure(void *fdt) if (gd->flags & GD_FLG_RELOC) { i = oftree_find(fdt); if (i == -1) { - if (oftree_count == CONFIG_OFNODE_MULTI_TREE_MAX) { - log_warning("Too many registered device trees (max %d)\n", - CONFIG_OFNODE_MULTI_TREE_MAX); + if (check_tree_count()) return oftree_null(); - } /* register the new tree */ i = oftree_count++; @@ -92,6 +100,41 @@ static oftree oftree_ensure(void *fdt) return tree; } +int oftree_new(oftree *treep) +{ + oftree tree = oftree_null(); + int ret; + + if (of_live_active()) { + struct device_node *root; + + ret = of_live_create_empty(&root); + if (ret) + return log_msg_ret("liv", ret); + tree = oftree_from_np(root); + } else { + const int size = 1024; + void *fdt; + + ret = check_tree_count(); + if (ret) + return log_msg_ret("fla", ret); + + /* register the new tree with a small size */ + fdt = malloc(size); + if (!fdt) + return log_msg_ret("fla", -ENOMEM); + ret = fdt_create_empty_tree(fdt, size); + if (ret) + return log_msg_ret("fla", -EINVAL); + oftree_list[oftree_count++] = fdt; + tree.fdt = fdt; + } + *treep = tree; + + return 0; +} + void oftree_dispose(oftree tree) { if (of_live_active()) @@ -193,8 +236,31 @@ static inline int oftree_find(const void *fdt) return 0; } +int oftree_new(oftree *treep) +{ + return -ENOSYS; +} + #endif /* OFNODE_MULTI_TREE */ +int oftree_to_fdt(oftree tree, struct abuf *buf) +{ + int ret; + + if (of_live_active()) { + ret = of_live_flatten(ofnode_to_np(oftree_root(tree)), buf); + if (ret) + return log_msg_ret("flt", ret); + } else { + void *fdt = oftree_lookup_fdt(tree); + + abuf_init(buf); + abuf_set(buf, fdt, fdt_totalsize(fdt)); + } + + return 0; +} + /** * ofnode_from_tree_offset() - get an ofnode from a tree offset (flat tree) * @@ -425,12 +491,12 @@ u64 ofnode_read_u64_default(ofnode node, const char *propname, u64 def) bool ofnode_read_bool(ofnode node, const char *propname) { - const void *prop; + bool prop; assert(ofnode_valid(node)); debug("%s: %s: ", __func__, propname); - prop = ofnode_get_property(node, propname, NULL); + prop = ofnode_has_property(node, propname); debug("%s\n", prop ? "true" : "false"); @@ -1102,6 +1168,14 @@ const void *ofnode_get_property(ofnode node, const char *propname, int *lenp) propname, lenp); } +bool ofnode_has_property(ofnode node, const char *propname) +{ + if (ofnode_is_np(node)) + return of_find_property(ofnode_to_np(node), propname, NULL); + else + return ofnode_get_property(node, propname, NULL); +} + int ofnode_first_property(ofnode node, struct ofprop *prop) { prop->node = node; @@ -1196,7 +1270,8 @@ const uint8_t *ofnode_read_u8_array_ptr(ofnode node, const char *propname, } int ofnode_read_pci_addr(ofnode node, enum fdt_pci_space type, - const char *propname, struct fdt_pci_addr *addr) + const char *propname, struct fdt_pci_addr *addr, + fdt_size_t *size) { const fdt32_t *cell; int len; @@ -1224,14 +1299,18 @@ int ofnode_read_pci_addr(ofnode node, enum fdt_pci_space type, (ulong)fdt32_to_cpu(cell[1]), (ulong)fdt32_to_cpu(cell[2])); if ((fdt32_to_cpu(*cell) & type) == type) { + const unaligned_fdt64_t *ptr; + addr->phys_hi = fdt32_to_cpu(cell[0]); addr->phys_mid = fdt32_to_cpu(cell[1]); addr->phys_lo = fdt32_to_cpu(cell[2]); + ptr = (const unaligned_fdt64_t *)(cell + 3); + if (size) + *size = fdt64_to_cpu(*ptr); break; } - cell += (FDT_PCI_ADDR_CELLS + - FDT_PCI_SIZE_CELLS); + cell += FDT_PCI_ADDR_CELLS + FDT_PCI_SIZE_CELLS; } if (i == num) { @@ -1547,7 +1626,46 @@ int ofnode_write_u32(ofnode node, const char *propname, u32 value) return -ENOMEM; *val = cpu_to_fdt32(value); - return ofnode_write_prop(node, propname, val, sizeof(value), false); + return ofnode_write_prop(node, propname, val, sizeof(value), true); +} + +int ofnode_write_u64(ofnode node, const char *propname, u64 value) +{ + fdt64_t *val; + + assert(ofnode_valid(node)); + + log_debug("%s = %llx", propname, (unsigned long long)value); + val = malloc(sizeof(*val)); + if (!val) + return -ENOMEM; + *val = cpu_to_fdt64(value); + + return ofnode_write_prop(node, propname, val, sizeof(value), true); +} + +int ofnode_write_bool(ofnode node, const char *propname, bool value) +{ + if (value) + return ofnode_write_prop(node, propname, NULL, 0, false); + else + return ofnode_delete_prop(node, propname); +} + +int ofnode_delete_prop(ofnode node, const char *propname) +{ + if (ofnode_is_np(node)) { + struct property *prop; + int len; + + prop = of_find_property(ofnode_to_np(node), propname, &len); + if (prop) + return of_remove_property(ofnode_to_np(node), prop); + return 0; + } else { + return fdt_delprop(ofnode_to_fdt(node), ofnode_to_offset(node), + propname); + } } int ofnode_set_enabled(ofnode node, bool value) @@ -1731,7 +1849,30 @@ int ofnode_add_subnode(ofnode node, const char *name, ofnode *subnodep) return ret; /* 0 or -EEXIST */ } -int ofnode_copy_props(ofnode src, ofnode dst) +int ofnode_delete(ofnode *nodep) +{ + ofnode node = *nodep; + int ret; + + assert(ofnode_valid(node)); + if (ofnode_is_np(node)) { + ret = of_remove_node(ofnode_to_np(node)); + } else { + void *fdt = ofnode_to_fdt(node); + int offset = ofnode_to_offset(node); + + ret = fdt_del_node(fdt, offset); + if (ret) + ret = -EFAULT; + } + if (ret) + return ret; + *nodep = ofnode_null(); + + return 0; +} + +int ofnode_copy_props(ofnode dst, ofnode src) { struct ofprop prop; @@ -1754,3 +1895,23 @@ int ofnode_copy_props(ofnode src, ofnode dst) return 0; } + +int ofnode_copy_node(ofnode dst_parent, const char *name, ofnode src, + ofnode *nodep) +{ + ofnode node; + int ret; + + ret = ofnode_add_subnode(dst_parent, name, &node); + if (ret) { + if (ret == -EEXIST) + *nodep = node; + return log_msg_ret("add", ret); + } + ret = ofnode_copy_props(node, src); + if (ret) + return log_msg_ret("cpy", ret); + *nodep = node; + + return 0; +} diff --git a/drivers/core/read.c b/drivers/core/read.c index 49066b59cd..419013451f 100644 --- a/drivers/core/read.c +++ b/drivers/core/read.c @@ -405,13 +405,15 @@ int dev_read_alias_highest_id(const char *stem) return fdtdec_get_alias_highest_id(gd->fdt_blob, stem); } -fdt_addr_t dev_read_addr_pci(const struct udevice *dev) +fdt_addr_t dev_read_addr_pci(const struct udevice *dev, fdt_size_t *sizep) { ulong addr; addr = dev_read_addr(dev); + if (sizep) + *sizep = 0; if (addr == FDT_ADDR_T_NONE && !of_live_active()) - addr = devfdt_get_addr_pci(dev); + addr = devfdt_get_addr_pci(dev, sizep); return addr; } diff --git a/drivers/core/util.c b/drivers/core/util.c index aa60fdd15b..81497df85f 100644 --- a/drivers/core/util.c +++ b/drivers/core/util.c @@ -30,7 +30,7 @@ int pci_get_devfn(struct udevice *dev) /* Extract the devfn from fdt_pci_addr */ ret = ofnode_read_pci_addr(dev_ofnode(dev), FDT_PCI_SPACE_CONFIG, - "reg", &addr); + "reg", &addr, NULL); if (ret) { if (ret != -ENOENT) return -EINVAL; diff --git a/drivers/misc/cros_ec_sandbox.c b/drivers/misc/cros_ec_sandbox.c index 8dbe0b188a..1201535f4a 100644 --- a/drivers/misc/cros_ec_sandbox.c +++ b/drivers/misc/cros_ec_sandbox.c @@ -81,6 +81,7 @@ struct ec_pwm_channel { /** * struct ec_state - Information about the EC state * + * @valid: true if this struct contains valid state data * @vbnv_context: Vboot context data stored by EC * @ec_config: FDT config information about the EC (e.g. flashmap) * @flash_data: Contents of flash memory @@ -95,6 +96,7 @@ struct ec_pwm_channel { * @pwm: Information per PWM channel */ struct ec_state { + bool valid; u8 vbnv_context[EC_VBNV_BLOCK_SIZE_V2]; struct fdt_cros_ec ec_config; uint8_t *flash_data; @@ -145,6 +147,7 @@ static int cros_ec_read_state(const void *blob, int node) memcpy(ec->flash_data, prop, len); debug("%s: Loaded EC flash data size %#x\n", __func__, len); } + ec->valid = true; return 0; } @@ -589,6 +592,7 @@ static int process_cmd(struct ec_state *ec, printf(" ** Unknown EC command %#02x\n", req_hdr->command); return -1; } + debug(" - EC command %#0x, result %d\n", req_hdr->command, len); return len; } @@ -675,7 +679,10 @@ int cros_ec_probe(struct udevice *dev) ofnode node; int err; - memcpy(ec, &s_state, sizeof(*ec)); + if (s_state.valid) + memcpy(ec, &s_state, sizeof(*ec)); + else + ec->current_image = EC_IMAGE_RO; err = cros_ec_decode_ec_flash(dev, &ec->ec_config); if (err) { debug("%s: Cannot device EC flash\n", __func__); diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index ae7350aaff..e0d01f6a85 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -123,7 +123,7 @@ static void pci_dev_find_ofnode(struct udevice *bus, phys_addr_t bdf, dev_for_each_subnode(node, bus) { ret = ofnode_read_pci_addr(node, FDT_PCI_SPACE_CONFIG, "reg", - &addr); + &addr, NULL); if (ret) continue; diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c index 3697cd8d65..83559550e6 100644 --- a/drivers/pci/pci_mvebu.c +++ b/drivers/pci/pci_mvebu.c @@ -641,7 +641,8 @@ static int mvebu_pcie_port_parse_dt(ofnode node, ofnode parent, struct mvebu_pci pcie->is_x4 = true; /* devfn is in bits [15:8], see PCI_DEV usage */ - ret = ofnode_read_pci_addr(node, FDT_PCI_SPACE_CONFIG, "reg", &pci_addr); + ret = ofnode_read_pci_addr(node, FDT_PCI_SPACE_CONFIG, "reg", &pci_addr, + NULL); if (ret < 0) { printf("%s: property \"reg\" is invalid\n", pcie->name); goto err; diff --git a/drivers/pci/pci_tegra.c b/drivers/pci/pci_tegra.c index 131c21b768..d6374a58e3 100644 --- a/drivers/pci/pci_tegra.c +++ b/drivers/pci/pci_tegra.c @@ -462,7 +462,7 @@ static int tegra_pcie_parse_port_info(ofnode node, uint *index, uint *lanes) *lanes = err; - err = ofnode_read_pci_addr(node, 0, "reg", &addr); + err = ofnode_read_pci_addr(node, 0, "reg", &addr, NULL); if (err < 0) { pr_err("failed to parse \"reg\" property\n"); return err; diff --git a/drivers/pci/pcie_mediatek.c b/drivers/pci/pcie_mediatek.c index ed25a10bcf..f0f34b5d11 100644 --- a/drivers/pci/pcie_mediatek.c +++ b/drivers/pci/pcie_mediatek.c @@ -661,7 +661,7 @@ static int mtk_pcie_probe(struct udevice *dev) if (!ofnode_is_enabled(subnode)) continue; - err = ofnode_read_pci_addr(subnode, 0, "reg", &addr); + err = ofnode_read_pci_addr(subnode, 0, "reg", &addr, NULL); if (err) return err; @@ -700,7 +700,7 @@ static int mtk_pcie_probe_v2(struct udevice *dev) if (!ofnode_is_enabled(subnode)) continue; - err = ofnode_read_pci_addr(subnode, 0, "reg", &addr); + err = ofnode_read_pci_addr(subnode, 0, "reg", &addr, NULL); if (err) return err; diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 6cb6598f3d..9f0f84c9b4 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -160,7 +160,6 @@ config SERIAL_PROBE_ALL config SPL_DM_SERIAL bool "Enable Driver Model for serial drivers in SPL" depends on DM_SERIAL && SPL_DM - select SYS_SPL_MALLOC_F default y help Enable driver model for serial in SPL. This replaces @@ -171,7 +170,6 @@ config SPL_DM_SERIAL config TPL_DM_SERIAL bool "Enable Driver Model for serial drivers in TPL" depends on DM_SERIAL && TPL_DM - select SYS_TPL_MALLOC_F default y if TPL && DM_SERIAL help Enable driver model for serial in TPL. This replaces diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index eab9537fba..6deb1d8ddc 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -13,6 +13,7 @@ #include <ns16550.h> #include <reset.h> #include <serial.h> +#include <spl.h> #include <watchdog.h> #include <asm/global_data.h> #include <linux/err.h> @@ -472,6 +473,10 @@ static int ns16550_serial_getinfo(struct udevice *dev, struct ns16550 *const com_port = dev_get_priv(dev); struct ns16550_plat *plat = com_port->plat; + /* save code size */ + if (!spl_in_proper()) + return -ENOSYS; + info->type = SERIAL_CHIP_16550_COMPATIBLE; #ifdef CONFIG_SYS_NS16550_PORT_MAPPED info->addr_space = SERIAL_ADDRESS_SPACE_IO; @@ -479,6 +484,7 @@ static int ns16550_serial_getinfo(struct udevice *dev, info->addr_space = SERIAL_ADDRESS_SPACE_MEMORY; #endif info->addr = plat->base; + info->size = plat->size; info->reg_width = plat->reg_width; info->reg_shift = plat->reg_shift; info->reg_offset = plat->reg_offset; @@ -487,7 +493,8 @@ static int ns16550_serial_getinfo(struct udevice *dev, return 0; } -static int ns16550_serial_assign_base(struct ns16550_plat *plat, fdt_addr_t base) +static int ns16550_serial_assign_base(struct ns16550_plat *plat, + fdt_addr_t base, fdt_size_t size) { if (base == FDT_ADDR_T_NONE) return -EINVAL; @@ -497,6 +504,7 @@ static int ns16550_serial_assign_base(struct ns16550_plat *plat, fdt_addr_t base #else plat->base = (unsigned long)map_physmem(base, 0, MAP_NOCACHE); #endif + plat->size = size; return 0; } @@ -507,6 +515,7 @@ int ns16550_serial_probe(struct udevice *dev) struct ns16550 *const com_port = dev_get_priv(dev); struct reset_ctl_bulk reset_bulk; fdt_addr_t addr; + fdt_addr_t size; int ret; /* @@ -514,8 +523,8 @@ int ns16550_serial_probe(struct udevice *dev) * or via a PCI bridge, assign plat->base before probing hardware. */ if (device_is_on_pci_bus(dev)) { - addr = devfdt_get_addr_pci(dev); - ret = ns16550_serial_assign_base(plat, addr); + addr = devfdt_get_addr_pci(dev, &size); + ret = ns16550_serial_assign_base(plat, addr, size); if (ret) return ret; } @@ -542,12 +551,14 @@ int ns16550_serial_of_to_plat(struct udevice *dev) { struct ns16550_plat *plat = dev_get_plat(dev); const u32 port_type = dev_get_driver_data(dev); + fdt_size_t size = 0; fdt_addr_t addr; struct clk clk; int err; - addr = dev_read_addr(dev); - err = ns16550_serial_assign_base(plat, addr); + addr = spl_in_proper() ? dev_read_addr_size(dev, &size) : + dev_read_addr(dev); + err = ns16550_serial_assign_base(plat, addr, size); if (err && !device_is_on_pci_bus(dev)) return err; diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index c6d63b3657..e8c6412e3f 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -307,7 +307,7 @@ struct global_data { #if CONFIG_IS_ENABLED(CMD_BDINFO_EXTRA) unsigned long malloc_start; #endif -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) /** * @malloc_base: base address of early malloc() */ @@ -588,6 +588,12 @@ static_assert(sizeof(struct global_data) == GD_SIZE); #define gd_set_pci_ram_top(val) #endif +#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#define gd_malloc_ptr() gd->malloc_ptr +#else +#define gd_malloc_ptr() 0L +#endif + /** * enum gd_flags - global data flags * @@ -687,6 +693,10 @@ enum gd_flags { * the memory used to holds its tables has been mapped out. */ GD_FLG_DM_DEAD = 0x400000, + /** + * @GD_FLG_BLOBLIST_READY: bloblist is ready for use + */ + GD_FLG_BLOBLIST_READY = 0x800000, }; #endif /* __ASSEMBLY__ */ diff --git a/include/bloblist.h b/include/bloblist.h index 7ea72c6bd4..080cc46a12 100644 --- a/include/bloblist.h +++ b/include/bloblist.h @@ -413,8 +413,26 @@ void bloblist_reloc(void *to, uint to_size, void *from, uint from_size); * standard passage. The size is detected automatically so CONFIG_BLOBLIST_SIZE * can be 0. * + * Sets GD_FLG_BLOBLIST_READY in global_data flags on success + * * Return: 0 if OK, -ve on error */ int bloblist_init(void); +#if CONFIG_IS_ENABLED(BLOBLIST) +/** + * bloblist_maybe_init() - Init the bloblist system if not already done + * + * Calls bloblist_init() if the GD_FLG_BLOBLIST_READY flag is not et + * + * Return: 0 if OK, -ve on error + */ +int bloblist_maybe_init(void); +#else +static inline int bloblist_maybe_init(void) +{ + return 0; +} +#endif /* BLOBLIST */ + #endif /* __BLOBLIST_H */ diff --git a/include/bootstage.h b/include/bootstage.h index 685939ccff..f9376c320c 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -244,6 +244,8 @@ void show_boot_progress(int val); #ifdef ENABLE_BOOTSTAGE +#include <mapmem.h> + /* This is the full bootstage implementation */ /** @@ -452,6 +454,26 @@ static inline int bootstage_init(bool first) #endif /* ENABLE_BOOTSTAGE */ +/* helpers for SPL */ +int _bootstage_stash_default(void); +int _bootstage_unstash_default(void); + +static inline int bootstage_stash_default(void) +{ + if (CONFIG_IS_ENABLED(BOOTSTAGE) && IS_ENABLED(CONFIG_BOOTSTAGE_STASH)) + return _bootstage_stash_default(); + + return 0; +} + +static inline int bootstage_unstash_default(void) +{ + if (CONFIG_IS_ENABLED(BOOTSTAGE) && IS_ENABLED(CONFIG_BOOTSTAGE_STASH)) + return _bootstage_unstash_default(); + + return 0; +} + /* Helper macro for adding a bootstage to a line of code */ #define BOOTSTAGE_MARKER() \ bootstage_mark_code(__FILE__, __func__, __LINE__) diff --git a/include/command.h b/include/command.h index ae7bb4a30b..34ea989b39 100644 --- a/include/command.h +++ b/include/command.h @@ -25,6 +25,10 @@ #endif #ifndef __ASSEMBLY__ + +/* For ARRAY_SIZE() */ +#include <linux/kernel.h> + /* * Monitor Command Table */ diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 0c96c9c24f..4838bfd4f1 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -18,7 +18,7 @@ #define CFG_SYS_INIT_RAM_ADDR 0xFFE00000 /* SPL memory allocation configuration, this is for FAT implementation */ #define CFG_SYS_INIT_RAM_SIZE (SOCFPGA_PHYS_OCRAM_SIZE - \ - CONFIG_SYS_SPL_MALLOC_SIZE) + CONFIG_SPL_SYS_MALLOC_SIZE) #endif /* diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 66ecb168a0..820372c28b 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -112,7 +112,7 @@ unsigned int cm_get_l4_sys_free_clk_hz(void); * SDRAM * 0x0000_0000 ...... Start of SDRAM_1 * unused / empty space for image loading - * Size 64MB ...... MALLOC (size CONFIG_SYS_SPL_MALLOC_SIZE) + * Size 64MB ...... MALLOC (size CONFIG_SPL_SYS_MALLOC_SIZE) * Size 1MB ...... BSS (size CONFIG_SPL_BSS_MAX_SIZE) * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB) * diff --git a/include/dm/device.h b/include/dm/device.h index e54cb6bca4..add67f9ec0 100644 --- a/include/dm/device.h +++ b/include/dm/device.h @@ -1005,7 +1005,8 @@ int dev_enable_by_path(const char *path); */ static inline bool device_is_on_pci_bus(const struct udevice *dev) { - return dev->parent && device_get_uclass_id(dev->parent) == UCLASS_PCI; + return CONFIG_IS_ENABLED(PCI) && dev->parent && + device_get_uclass_id(dev->parent) == UCLASS_PCI; } /** diff --git a/include/dm/fdtaddr.h b/include/dm/fdtaddr.h index dcdc19137c..6d2fa8f104 100644 --- a/include/dm/fdtaddr.h +++ b/include/dm/fdtaddr.h @@ -168,8 +168,9 @@ fdt_addr_t devfdt_get_addr_size_name(const struct udevice *dev, * devfdt_get_addr_pci() - Read an address and handle PCI address translation * * @dev: Device to read from + * @sizep: If non-NULL, returns size of address space * Return: address or FDT_ADDR_T_NONE if not found */ -fdt_addr_t devfdt_get_addr_pci(const struct udevice *dev); +fdt_addr_t devfdt_get_addr_pci(const struct udevice *dev, fdt_size_t *sizep); #endif diff --git a/include/dm/of_access.h b/include/dm/of_access.h index 9361d0a87b..de740d4467 100644 --- a/include/dm/of_access.h +++ b/include/dm/of_access.h @@ -597,4 +597,22 @@ int of_write_prop(struct device_node *np, const char *propname, int len, int of_add_subnode(struct device_node *node, const char *name, int len, struct device_node **subnodep); +/** + * of_remove_property() - Remove a property from a node + * + * @np: Node to remove from + * @prop: Pointer to property to remove + * Return 0 if OK, -ENODEV if the property could not be found in the node + */ +int of_remove_property(struct device_node *np, struct property *prop); + +/** + * of_remove_node() - Remove a node from the tree + * + * @to_remove: Node to remove + * Return: 0 if OK, -EPERM if it is the root node (wWhich cannot be removed), + * -ENOENT if the tree is broken (to_remove is not a child of its parent) + */ +int of_remove_node(struct device_node *to_remove); + #endif diff --git a/include/dm/ofnode.h b/include/dm/ofnode.h index 06c969c61f..19e97a9032 100644 --- a/include/dm/ofnode.h +++ b/include/dm/ofnode.h @@ -17,6 +17,7 @@ /* Enable checks to protect against invalid calls */ #undef OF_CHECKS +struct abuf; struct resource; #include <dm/ofnode_decl.h> @@ -128,6 +129,27 @@ static inline ofnode noffset_to_ofnode(ofnode other_node, int of_offset) #endif /* OFNODE_MULTI_TREE */ /** + * oftree_new() - Create a new, empty tree + * + * @treep: Returns a pointer to the tree, on success + * Returns: 0 on success, -ENOMEM if out of memory, -E2BIG if !OF_LIVE and + * there are too many (flattrees) already + */ +int oftree_new(oftree *treep); + +/** + * oftree_to_fdt() - Convert an oftree to a flat FDT + * + * @tree: tree to flatten (if livetree) or copy (if not) + * @buf: Returns inited buffer containing the newly created flat tree. Note + * that for flat tree the buffer is not allocated. In either case the caller + * must call abut_uninit() to free any memory used by @buf + * Return: 0 on success, -ENOMEM if out of memory, other -ve value for any other + * error + */ +int oftree_to_fdt(oftree tree, struct abuf *buf); + +/** * ofnode_to_np() - convert an ofnode to a live DT node pointer * * This cannot be called if the reference contains an offset. @@ -1015,11 +1037,20 @@ int ofnode_decode_panel_timing(ofnode node, * @node: node to read * @propname: property to read * @lenp: place to put length on success - * Return: pointer to property, or NULL if not found + * Return: pointer to property value, or NULL if not found or empty */ const void *ofnode_get_property(ofnode node, const char *propname, int *lenp); /** + * ofnode_has_property() - check if a node has a named property + * + * @node: node to read + * @propname: property to read + * Return: true if the property exists in the node, false if not + */ +bool ofnode_has_property(ofnode node, const char *propname); + +/** * ofnode_first_property()- get the reference of the first property * * Get reference to the first property of the node, it is used to iterate @@ -1122,13 +1153,15 @@ const uint8_t *ofnode_read_u8_array_ptr(ofnode node, const char *propname, * @type: pci address type (FDT_PCI_SPACE_xxx) * @propname: name of property to find * @addr: returns pci address in the form of fdt_pci_addr + * @size: if non-null, returns register-space size * Return: * 0 if ok, -ENOENT if the property did not exist, -EINVAL if the * format of the property was invalid, -ENXIO if the requested * address type was not found */ int ofnode_read_pci_addr(ofnode node, enum fdt_pci_space type, - const char *propname, struct fdt_pci_addr *addr); + const char *propname, struct fdt_pci_addr *addr, + fdt_size_t *size); /** * ofnode_read_pci_vendev() - look up PCI vendor and device id @@ -1431,6 +1464,37 @@ int ofnode_write_string(ofnode node, const char *propname, const char *value); int ofnode_write_u32(ofnode node, const char *propname, u32 value); /** + * ofnode_write_u64() - Set an integer property of an ofnode + * + * @node: The node for whose string property should be set + * @propname: The name of the string property to set + * @value: The new value of the 64-bit integer property + * Return: 0 if successful, -ve on error + */ +int ofnode_write_u64(ofnode node, const char *propname, u64 value); + +/** + * ofnode_write_bool() - Set a boolean property of an ofnode + * + * This either adds or deleted a property with a zero-length value + * + * @node: The node for whose string property should be set + * @propname: The name of the string property to set + * @value: The new value of the boolean property + * Return: 0 if successful, -ve on error + */ +int ofnode_write_bool(ofnode node, const char *propname, bool value); + +/** + * ofnode_delete_prop() - Delete a property + * + * @node: Node containing the property to delete + * @propname: Name of property to delete + * Return: 0 if successful, -ve on error + */ +int ofnode_delete_prop(ofnode node, const char *propname); + +/** * ofnode_set_enabled() - Enable or disable a device tree node given by its * ofnode * @@ -1598,7 +1662,7 @@ int ofnode_add_subnode(ofnode parent, const char *name, ofnode *nodep); /** * ofnode_copy_props() - copy all properties from one node to another * - * Makes a copy of all properties from the source note in the destination node. + * Makes a copy of all properties from the source node to the destination node. * Existing properties in the destination node remain unchanged, except that * any with the same name are overwritten, including changing the size of the * property. @@ -1606,9 +1670,37 @@ int ofnode_add_subnode(ofnode parent, const char *name, ofnode *nodep); * For livetree, properties are copied / allocated, so the source tree does not * need to be present afterwards. * + * @dst: Destination node to write properties to * @src: Source node to read properties from - * @dst: Destination node to write properties too */ -int ofnode_copy_props(ofnode src, ofnode dst); +int ofnode_copy_props(ofnode dst, ofnode src); + +/** + * ofnode_copy_node() - Copy a node to another place + * + * If a node with this name already exists in dst_parent, this returns an + * .error + * + * @dst_parent: Parent of the newly copied node + * @name: Name to give the new node + * @src: Source node to copy + * @nodep: Returns the new node, or the existing node if there is one + * Return: 0 if OK, -EEXIST if dst_parent already has a node with this parent + */ +int ofnode_copy_node(ofnode dst_parent, const char *name, ofnode src, + ofnode *nodep); + +/** + * ofnode_delete() - Delete a node + * + * Delete a node from the tree + * + * @nodep: Pointer to node to delete (set to ofnode_null() on success) + * Return: 0 if OK, -ENOENT if the node does not exist, -EPERM if it is the root + * node (wWhich cannot be removed), -EFAULT if the tree is broken (to_remove is + * not a child of its parent), + * + */ +int ofnode_delete(ofnode *nodep); #endif diff --git a/include/dm/read.h b/include/dm/read.h index c2615f72f4..3c2eea6f0c 100644 --- a/include/dm/read.h +++ b/include/dm/read.h @@ -346,9 +346,10 @@ void *dev_read_addr_ptr(const struct udevice *dev); * fdtdec_get_addr() and friends. * * @dev: Device to read from + * @sizep: If non-NULL, returns size of address space found * Return: address or FDT_ADDR_T_NONE if not found */ -fdt_addr_t dev_read_addr_pci(const struct udevice *dev); +fdt_addr_t dev_read_addr_pci(const struct udevice *dev, fdt_size_t *sizep); /** * dev_remap_addr() - Get the reg property of a device as a @@ -996,9 +997,10 @@ static inline void *dev_read_addr_ptr(const struct udevice *dev) return devfdt_get_addr_ptr(dev); } -static inline fdt_addr_t dev_read_addr_pci(const struct udevice *dev) +static inline fdt_addr_t dev_read_addr_pci(const struct udevice *dev, + fdt_size_t *sizep) { - return devfdt_get_addr_pci(dev); + return devfdt_get_addr_pci(dev, sizep); } static inline void *dev_remap_addr(const struct udevice *dev) diff --git a/include/ns16550.h b/include/ns16550.h index e7e68663d0..7f48130008 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -58,6 +58,7 @@ enum ns16550_flags { * struct ns16550_plat - information about a NS16550 port * * @base: Base register address + * @size: Size of register area in bytes * @reg_width: IO accesses size of registers (in bytes, 1 or 4) * @reg_shift: Shift size of registers (0=byte, 1=16bit, 2=32bit...) * @reg_offset: Offset to start of registers (normally 0) @@ -67,7 +68,8 @@ enum ns16550_flags { * @bdf: PCI slot/function (pci_dev_t) */ struct ns16550_plat { - unsigned long base; + ulong base; + ulong size; int reg_width; int reg_shift; int reg_offset; diff --git a/include/of_live.h b/include/of_live.h index 05e86ac06b..67bd5f02c7 100644 --- a/include/of_live.h +++ b/include/of_live.h @@ -9,6 +9,7 @@ #ifndef _OF_LIVE_H #define _OF_LIVE_H +struct abuf; struct device_node; /** @@ -46,4 +47,21 @@ int unflatten_device_tree(const void *blob, struct device_node **mynodes); */ void of_live_free(struct device_node *root); +/** + * of_live_create_empty() - Create a new, empty tree + * + * @rootp: Returns the root node of the created tree + * Return: 0 if OK, -ENOMEM if out of memory + */ +int of_live_create_empty(struct device_node **rootp); + +/** + * of_live_flatten() - Create an FDT from a hierarchical tree + * + * @root: Root node of tree to convert + * @buf: Buffer to return the tree (inited by this function) + * Return: 0 if OK, -ENOMEM if out of memory + */ +int of_live_flatten(const struct device_node *root, struct abuf *buf); + #endif diff --git a/include/serial.h b/include/serial.h index 42bdf3759c..205889d28b 100644 --- a/include/serial.h +++ b/include/serial.h @@ -137,6 +137,7 @@ enum adr_space_type { * @type: type of the UART chip * @addr_space: address space to access the registers * @addr: physical address of the registers + * @size: size of the register area in bytes * @reg_width: size (in bytes) of the IO accesses to the registers * @reg_offset: offset to apply to the @addr from the start of the registers * @reg_shift: quantity to shift the register offsets by @@ -147,6 +148,7 @@ struct serial_device_info { enum serial_chip_type type; enum adr_space_type addr_space; ulong addr; + ulong size; u8 reg_width; u8 reg_offset; u8 reg_shift; diff --git a/include/spl.h b/include/spl.h index 0fedddd00e..a222db9c55 100644 --- a/include/spl.h +++ b/include/spl.h @@ -132,6 +132,16 @@ static inline enum u_boot_phase spl_phase(void) #endif } +/* returns true if in U-Boot proper, false if in SPL */ +static inline bool spl_in_proper(void) +{ +#ifdef CONFIG_SPL_BUILD + return false; +#endif + + return true; +} + /** * spl_prev_phase() - Figure out the previous U-Boot phase * @@ -263,6 +273,15 @@ struct spl_image_info { #endif }; +static inline void *spl_image_fdt_addr(struct spl_image_info *info) +{ +#if CONFIG_IS_ENABLED(LOAD_FIT) || CONFIG_IS_ENABLED(LOAD_FIT_FULL) + return info->fdt_addr; +#else + return 0; +#endif +} + /** * Information required to load data from a device * @@ -707,9 +726,13 @@ int spl_early_init(void); */ int spl_init(void); -#ifdef CONFIG_SPL_BOARD_INIT +/* + * spl_board_init() - Do board-specific init in SPL + * + * If xPL_BOARD_INIT is enabled, this is called from board_init_r() before + * jumping to the next phase. + */ void spl_board_init(void); -#endif /** * spl_was_boot_source() - check if U-Boot booted from SPL @@ -897,4 +920,15 @@ struct legacy_img_hdr *spl_get_load_buffer(ssize_t offset, size_t size); void board_boot_order(u32 *spl_boot_list); void spl_save_restore_data(void); + +/** + * spl_load_fit_image() - Fully parse and a FIT image in SPL + * + * @spl_image: SPL Image data to fill in + * @header: Pointer to FIT image + * Return 0 if OK, -ve on error + */ +int spl_load_fit_image(struct spl_image_info *spl_image, + const struct legacy_img_hdr *header); + #endif diff --git a/include/system-constants.h b/include/system-constants.h index 0d6b71b35a..59371568d1 100644 --- a/include/system-constants.h +++ b/include/system-constants.h @@ -22,11 +22,23 @@ /* * Typically, we have the SPL malloc pool at the end of the BSS area. */ -#ifdef CONFIG_HAS_CUSTOM_SPL_MALLOC_START -#define SYS_SPL_MALLOC_START CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR -#else -#define SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ +#ifdef CONFIG_SPL_HAS_CUSTOM_MALLOC_START +#define SPL_SYS_MALLOC_START CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR +#elif defined(CONFIG_SPL_BSS_START_ADDR) +#define SPL_SYS_MALLOC_START (CONFIG_SPL_BSS_START_ADDR + \ CONFIG_SPL_BSS_MAX_SIZE) +#else +/* feature not enabled: this value avoids compiler errors but is not used */ +#define SPL_SYS_MALLOC_START 0 +#endif +#define SPL_SYS_MALLOC_SIZE \ + IF_ENABLED_INT(CONFIG_SPL_SYS_MALLOC, CONFIG_SPL_SYS_MALLOC_SIZE) + +/* deal with an optional value */ +#ifdef CONFIG_SPL_OS_BOOT +#define SPL_PAYLOAD_ARGS_ADDR CONFIG_SPL_PAYLOAD_ARGS_ADDR +#else +#define SPL_PAYLOAD_ARGS_ADDR 0 #endif #endif diff --git a/lib/asm-offsets.c b/lib/asm-offsets.c index 0808cd4b0c..216d9716d0 100644 --- a/lib/asm-offsets.c +++ b/lib/asm-offsets.c @@ -32,7 +32,7 @@ int main(void) DEFINE(GD_FLAGS, offsetof(struct global_data, flags)); -#if CONFIG_VAL(SYS_MALLOC_F_LEN) +#if CONFIG_IS_ENABLED(SYS_MALLOC_F) DEFINE(GD_MALLOC_BASE, offsetof(struct global_data, malloc_base)); #endif diff --git a/lib/of_live.c b/lib/of_live.c index 25f7af6106..812c488f60 100644 --- a/lib/of_live.c +++ b/lib/of_live.c @@ -8,13 +8,21 @@ * Copyright (c) 2017 Google, Inc */ +#define LOG_CATEGORY LOGC_DT + #include <common.h> +#include <abuf.h> #include <log.h> #include <linux/libfdt.h> #include <of_live.h> #include <malloc.h> #include <dm/of_access.h> #include <linux/err.h> +#include <linux/sizes.h> + +enum { + BUF_STEP = SZ_64K, +}; static void *unflatten_dt_alloc(void **mem, unsigned long size, unsigned long align) @@ -336,3 +344,136 @@ void of_live_free(struct device_node *root) /* the tree is stored as a contiguous block of memory */ free(root); } + +int of_live_create_empty(struct device_node **rootp) +{ + struct device_node *root; + + root = calloc(1, sizeof(struct device_node)); + if (!root) + return -ENOMEM; + root->name = strdup(""); + if (!root->name) { + free(root); + return -ENOMEM; + } + root->type = "<NULL>"; + root->full_name = ""; + *rootp = root; + + return 0; +} + +static int check_space(int ret, struct abuf *buf) +{ + if (ret == -FDT_ERR_NOSPACE) { + if (!abuf_realloc_inc(buf, BUF_STEP)) + return log_msg_ret("spc", -ENOMEM); + ret = fdt_resize(abuf_data(buf), abuf_data(buf), + abuf_size(buf)); + if (ret) + return log_msg_ret("res", -EFAULT); + + return -EAGAIN; + } + + return 0; +} + +/** + * flatten_node() - Write out the node and its properties into a flat tree + */ +static int flatten_node(struct abuf *buf, const struct device_node *node) +{ + const struct device_node *np; + const struct property *pp; + int ret; + + ret = fdt_begin_node(abuf_data(buf), node->name); + ret = check_space(ret, buf); + if (ret == -EAGAIN) { + ret = fdt_begin_node(abuf_data(buf), node->name); + if (ret) { + log_debug("Internal error a %d\n", ret); + return -EFAULT; + } + } + if (ret) + return log_msg_ret("beg", ret); + + /* First write out the properties */ + for (pp = node->properties; !ret && pp; pp = pp->next) { + ret = fdt_property(abuf_data(buf), pp->name, pp->value, + pp->length); + ret = check_space(ret, buf); + if (ret == -EAGAIN) { + ret = fdt_property(abuf_data(buf), pp->name, pp->value, + pp->length); + } + } + + /* Next write out the subnodes */ + for (np = node->child; np; np = np->sibling) { + ret = flatten_node(buf, np); + if (ret) + return log_msg_ret("sub", ret); + } + + ret = fdt_end_node(abuf_data(buf)); + ret = check_space(ret, buf); + if (ret == -EAGAIN) { + ret = fdt_end_node(abuf_data(buf)); + if (ret) { + log_debug("Internal error b %d\n", ret); + return -EFAULT; + } + } + if (ret) + return log_msg_ret("end", ret); + + return 0; +} + +int of_live_flatten(const struct device_node *root, struct abuf *buf) +{ + int ret; + + abuf_init(buf); + if (!abuf_realloc(buf, BUF_STEP)) + return log_msg_ret("ini", -ENOMEM); + + ret = fdt_create(abuf_data(buf), abuf_size(buf)); + if (!ret) + ret = fdt_finish_reservemap(abuf_data(buf)); + if (ret) { + log_debug("Failed to start FDT (err=%d)\n", ret); + return log_msg_ret("sta", -EINVAL); + } + + ret = flatten_node(buf, root); + if (ret) + return log_msg_ret("flt", ret); + + ret = fdt_finish(abuf_data(buf)); + ret = check_space(ret, buf); + if (ret == -EAGAIN) { + ret = fdt_finish(abuf_data(buf)); + if (ret) { + log_debug("Internal error c %d\n", ret); + return -EFAULT; + } + } + if (ret) + return log_msg_ret("fin", ret); + + ret = fdt_pack(abuf_data(buf)); + if (ret) { + log_debug("Failed to pack (err=%d)\n", ret); + return log_msg_ret("pac", -EFAULT); + } + + if (!abuf_realloc(buf, fdt_totalsize(abuf_data(buf)))) + return log_msg_ret("abu", -EFAULT); + + return 0; +} diff --git a/test/dm/ofnode.c b/test/dm/ofnode.c index d71faac0ee..a5bc43aea4 100644 --- a/test/dm/ofnode.c +++ b/test/dm/ofnode.c @@ -17,6 +17,7 @@ */ #include <common.h> +#include <abuf.h> #include <dm.h> #include <log.h> #include <of_live.h> @@ -26,6 +27,7 @@ #include <dm/root.h> #include <dm/test.h> #include <dm/uclass-internal.h> +#include <linux/sizes.h> #include <test/test.h> #include <test/ut.h> @@ -91,6 +93,7 @@ void free_oftree(oftree tree) free(tree.np); } +/* test ofnode_device_is_compatible() */ static int dm_test_ofnode_compatible(struct unit_test_state *uts) { ofnode root_node = ofnode_path("/"); @@ -114,7 +117,7 @@ static int dm_test_ofnode_compatible_ot(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_compatible_ot, UT_TESTF_OTHER_FDT); +DM_TEST(dm_test_ofnode_compatible_ot, UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); static int dm_test_ofnode_get_by_phandle(struct unit_test_state *uts) { @@ -134,6 +137,7 @@ static int dm_test_ofnode_get_by_phandle(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_get_by_phandle, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test oftree_get_by_phandle() with a the 'other' oftree */ static int dm_test_ofnode_get_by_phandle_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -146,7 +150,8 @@ static int dm_test_ofnode_get_by_phandle_ot(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_get_by_phandle_ot, UT_TESTF_OTHER_FDT); +DM_TEST(dm_test_ofnode_get_by_phandle_ot, + UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); static int check_prop_values(struct unit_test_state *uts, ofnode start, const char *propname, const char *propval, @@ -187,6 +192,7 @@ static int dm_test_ofnode_by_prop_value(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_by_prop_value, UT_TESTF_SCAN_FDT); +/* test ofnode_by_prop_value() with a the 'other' oftree */ static int dm_test_ofnode_by_prop_value_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -196,8 +202,10 @@ static int dm_test_ofnode_by_prop_value_ot(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_by_prop_value_ot, UT_TESTF_OTHER_FDT); +DM_TEST(dm_test_ofnode_by_prop_value_ot, + UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); +/* test ofnode_read_fmap_entry() */ static int dm_test_ofnode_fmap(struct unit_test_state *uts) { struct fmap_entry entry; @@ -213,12 +221,16 @@ static int dm_test_ofnode_fmap(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_fmap, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test ofnode_read_prop() */ static int dm_test_ofnode_read(struct unit_test_state *uts) { const u32 *val; ofnode node; int size; + node = oftree_path(oftree_default(), "/"); + ut_assert(ofnode_valid(node)); + node = ofnode_path("/a-test"); ut_assert(ofnode_valid(node)); @@ -237,8 +249,9 @@ static int dm_test_ofnode_read(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_read, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +DM_TEST(dm_test_ofnode_read, UT_TESTF_SCAN_FDT); +/* test ofnode_read_prop() with the 'other' tree */ static int dm_test_ofnode_read_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -246,6 +259,9 @@ static int dm_test_ofnode_read_ot(struct unit_test_state *uts) ofnode node; int size; + node = oftree_path(otree, "/"); + ut_assert(ofnode_valid(node)); + node = oftree_path(otree, "/node/subnode"); ut_assert(ofnode_valid(node)); @@ -256,8 +272,9 @@ static int dm_test_ofnode_read_ot(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_read_ot, UT_TESTF_OTHER_FDT); +DM_TEST(dm_test_ofnode_read_ot, UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); +/* test ofnode_count_/parse_phandle_with_args() */ static int dm_test_ofnode_phandle(struct unit_test_state *uts) { struct ofnode_phandle_args args; @@ -333,6 +350,7 @@ static int dm_test_ofnode_phandle(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_phandle, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test ofnode_count_/parse_phandle_with_args() with 'other' tree */ static int dm_test_ofnode_phandle_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -361,6 +379,7 @@ static int dm_test_ofnode_phandle_ot(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_phandle_ot, UT_TESTF_OTHER_FDT); +/* test ofnode_read_chosen_string/node/prop() */ static int dm_test_ofnode_read_chosen(struct unit_test_state *uts) { const char *str; @@ -390,6 +409,7 @@ static int dm_test_ofnode_read_chosen(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_read_chosen, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test ofnode_get_aliases_node/prop() */ static int dm_test_ofnode_read_aliases(struct unit_test_state *uts) { const void *val; @@ -433,6 +453,7 @@ static int dm_test_ofnode_get_child_count(struct unit_test_state *uts) DM_TEST(dm_test_ofnode_get_child_count, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test ofnode_get_child_count() with 'other' tree */ static int dm_test_ofnode_get_child_count_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -452,7 +473,8 @@ static int dm_test_ofnode_get_child_count_ot(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_get_child_count_ot, UT_TESTF_OTHER_FDT); +DM_TEST(dm_test_ofnode_get_child_count_ot, + UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); static int dm_test_ofnode_is_enabled(struct unit_test_state *uts) { @@ -466,6 +488,7 @@ static int dm_test_ofnode_is_enabled(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_is_enabled, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test ofnode_is_enabled() with 'other' tree */ static int dm_test_ofnode_is_enabled_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -479,6 +502,7 @@ static int dm_test_ofnode_is_enabled_ot(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_is_enabled_ot, UT_TESTF_OTHER_FDT); +/* test ofnode_get_addr/size() */ static int dm_test_ofnode_get_reg(struct unit_test_state *uts) { ofnode node; @@ -515,6 +539,7 @@ static int dm_test_ofnode_get_reg(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_get_reg, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test ofnode_get_addr() with 'other' tree */ static int dm_test_ofnode_get_reg_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -526,7 +551,7 @@ static int dm_test_ofnode_get_reg_ot(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_get_reg_ot, UT_TESTF_OTHER_FDT); +DM_TEST(dm_test_ofnode_get_reg_ot, UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); static int dm_test_ofnode_get_path(struct unit_test_state *uts) { @@ -549,6 +574,7 @@ static int dm_test_ofnode_get_path(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_get_path, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test ofnode_get_path() with 'other' tree */ static int dm_test_ofnode_get_path_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -566,8 +592,9 @@ static int dm_test_ofnode_get_path_ot(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_get_path_ot, UT_TESTF_OTHER_FDT); +DM_TEST(dm_test_ofnode_get_path_ot, UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); +/* test ofnode_conf_read_bool/int/str() */ static int dm_test_ofnode_conf(struct unit_test_state *uts) { ut_assert(!ofnode_conf_read_bool("missing")); @@ -581,7 +608,7 @@ static int dm_test_ofnode_conf(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_conf, 0); +DM_TEST(dm_test_ofnode_conf, UT_TESTF_SCAN_FDT); static int dm_test_ofnode_options(struct unit_test_state *uts) { @@ -620,6 +647,7 @@ static int dm_test_ofnode_for_each_compatible_node(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_for_each_compatible_node, UT_TESTF_SCAN_FDT); +/* test dm_test_ofnode_string_count/index/list() */ static int dm_test_ofnode_string(struct unit_test_state *uts) { const char **val; @@ -665,8 +693,9 @@ static int dm_test_ofnode_string(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_string, 0); +DM_TEST(dm_test_ofnode_string, UT_TESTF_SCAN_FDT); +/* test error returns from ofnode_read_string_count/index/list() */ static int dm_test_ofnode_string_err(struct unit_test_state *uts) { const char **val; @@ -716,7 +745,7 @@ static int dm_test_ofnode_string_err(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_string_err, UT_TESTF_LIVE_TREE); -static int dm_test_ofnode_get_phy(struct unit_test_state *uts) +static int dm_test_ofnode_read_phy_mode(struct unit_test_state *uts) { ofnode eth_node, phy_node; phy_interface_t mode; @@ -736,7 +765,7 @@ static int dm_test_ofnode_get_phy(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_get_phy, 0); +DM_TEST(dm_test_ofnode_read_phy_mode, UT_TESTF_SCAN_FDT); /** * make_ofnode_fdt() - Create an FDT for testing with ofnode @@ -770,11 +799,11 @@ static int make_ofnode_fdt(struct unit_test_state *uts, void *fdt, int size, return 0; } -static int dm_test_ofnode_root(struct unit_test_state *uts) +/* Check that aliases work on the control FDT */ +static int dm_test_ofnode_aliases(struct unit_test_state *uts) { ofnode node; - /* Check that aliases work on the control FDT */ node = ofnode_get_aliases_node("ethernet3"); ut_assert(ofnode_valid(node)); ut_asserteq_str("sbe5", ofnode_get_name(node)); @@ -783,8 +812,15 @@ static int dm_test_ofnode_root(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_root, UT_TESTF_SCAN_FDT); +DM_TEST(dm_test_ofnode_aliases, UT_TESTF_SCAN_FDT); +/** + * dm_test_ofnode_root_mult() - Check aliaes on control and 'other' tree + * + * Check that aliases work only with the control FDT, not with 'other' tree. + * This is not actually the desired behaviour. If aliases are implemented for + * any tree, then this test should be changed. + */ static int dm_test_ofnode_root_mult(struct unit_test_state *uts) { char fdt[256]; @@ -817,6 +853,7 @@ static int dm_test_ofnode_root_mult(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_root_mult, UT_TESTF_SCAN_FDT); +/* test ofnode_set_enabled(), ofnode_write_prop() on a livetree */ static int dm_test_ofnode_livetree_writing(struct unit_test_state *uts) { struct udevice *dev; @@ -906,6 +943,7 @@ static int dm_test_ofnode_write_copy(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_write_copy, UT_TESTF_SCAN_FDT); +/* test writing a property to the 'other' tree */ static int dm_test_ofnode_write_copy_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -920,8 +958,9 @@ static int dm_test_ofnode_write_copy_ot(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_write_copy_ot, UT_TESTF_OTHER_FDT); +DM_TEST(dm_test_ofnode_write_copy_ot, UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); +/* test ofnode_read_u32_index/default() */ static int dm_test_ofnode_u32(struct unit_test_state *uts) { ofnode node; @@ -949,6 +988,7 @@ static int dm_test_ofnode_u32(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_u32, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test ofnode_read_u32_array() */ static int dm_test_ofnode_u32_array(struct unit_test_state *uts) { ofnode node; @@ -975,6 +1015,7 @@ static int dm_test_ofnode_u32_array(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_u32_array, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT); +/* test ofnode_read_u64() and ofnode_write_u64() */ static int dm_test_ofnode_u64(struct unit_test_state *uts) { ofnode node; @@ -984,6 +1025,10 @@ static int dm_test_ofnode_u64(struct unit_test_state *uts) ut_assert(ofnode_valid(node)); ut_assertok(ofnode_read_u64(node, "int64-value", &val)); ut_asserteq_64(0x1111222233334444, val); + ut_assertok(ofnode_write_u64(node, "new-int64-value", 0x9876543210)); + ut_assertok(ofnode_read_u64(node, "new-int64-value", &val)); + ut_asserteq_64(0x9876543210, val); + ut_asserteq(-EINVAL, ofnode_read_u64(node, "missing", &val)); ut_assertok(ofnode_read_u64_index(node, "int64-array", 0, &val)); @@ -994,6 +1039,12 @@ static int dm_test_ofnode_u64(struct unit_test_state *uts) ofnode_read_u64_index(node, "int64-array", 2, &val)); ut_asserteq(-EINVAL, ofnode_read_u64_index(node, "missing", 0, &val)); + ut_assertok(ofnode_write_u64(node, "int64-array", 0x9876543210)); + ut_assertok(ofnode_read_u64_index(node, "int64-array", 0, &val)); + ut_asserteq_64(0x9876543210, val); + ut_asserteq(-EOVERFLOW, + ofnode_read_u64_index(node, "int64-array", 1, &val)); + return 0; } DM_TEST(dm_test_ofnode_u64, UT_TESTF_SCAN_FDT); @@ -1107,6 +1158,7 @@ static int dm_test_ofnode_by_compatible(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_by_compatible, UT_TESTF_SCAN_FDT); +/* check ofnode_by_compatible() on the 'other' tree */ static int dm_test_ofnode_by_compatible_ot(struct unit_test_state *uts) { const char *compat = "sandbox-other2"; @@ -1122,7 +1174,7 @@ static int dm_test_ofnode_by_compatible_ot(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_ofnode_by_compatible_ot, UT_TESTF_OTHER_FDT); +DM_TEST(dm_test_ofnode_by_compatible_ot, UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); static int dm_test_ofnode_find_subnode(struct unit_test_state *uts) { @@ -1141,6 +1193,7 @@ static int dm_test_ofnode_find_subnode(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_find_subnode, UT_TESTF_SCAN_FDT); +/* test ofnode_find_subnode() on the 'other' tree */ static int dm_test_ofnode_find_subnode_ot(struct unit_test_state *uts) { oftree otree = get_other_oftree(uts); @@ -1209,12 +1262,11 @@ static int dm_test_ofnode_too_many(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_too_many, UT_TESTF_SCAN_FDT); -static int check_copy_props(struct unit_test_state *uts, ofnode src, - ofnode dst) +static int check_copy_props(struct unit_test_state *uts, ofnode dst, ofnode src) { u32 reg[2], val; - ut_assertok(ofnode_copy_props(src, dst)); + ut_assertok(ofnode_copy_props(dst, src)); ut_assertok(ofnode_read_u32(dst, "ping-expect", &val)); ut_asserteq(3, val); @@ -1246,7 +1298,7 @@ static int dm_test_ofnode_copy_props(struct unit_test_state *uts) src = ofnode_path("/b-test"); dst = ofnode_path("/some-bus"); - ut_assertok(check_copy_props(uts, src, dst)); + ut_assertok(check_copy_props(uts, dst, src)); /* check a property that is in the destination already */ ut_asserteq_str("mux0", ofnode_read_string(dst, "mux-control-names")); @@ -1255,6 +1307,7 @@ static int dm_test_ofnode_copy_props(struct unit_test_state *uts) } DM_TEST(dm_test_ofnode_copy_props, UT_TESTF_SCAN_FDT); +/* test ofnode_copy_props() with the 'other' tree */ static int dm_test_ofnode_copy_props_ot(struct unit_test_state *uts) { ofnode src, dst; @@ -1262,7 +1315,7 @@ static int dm_test_ofnode_copy_props_ot(struct unit_test_state *uts) src = ofnode_path("/b-test"); dst = oftree_path(otree, "/node/subnode2"); - ut_assertok(check_copy_props(uts, src, dst)); + ut_assertok(check_copy_props(uts, dst, src)); return 0; } @@ -1292,7 +1345,7 @@ static int dm_test_livetree_align(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_livetree_align, UT_TESTF_LIVE_TREE); +DM_TEST(dm_test_livetree_align, UT_TESTF_SCAN_FDT | UT_TESTF_LIVE_TREE); /* check that it is possible to load an arbitrary livetree */ static int dm_test_livetree_ensure(struct unit_test_state *uts) @@ -1311,4 +1364,161 @@ static int dm_test_livetree_ensure(struct unit_test_state *uts) return 0; } -DM_TEST(dm_test_livetree_ensure, 0); +DM_TEST(dm_test_livetree_ensure, UT_TESTF_SCAN_FDT); + +static int dm_test_oftree_new(struct unit_test_state *uts) +{ + ofnode node, subnode, check; + oftree tree; + + ut_assertok(oftree_new(&tree)); + node = oftree_root(tree); + ut_assert(ofnode_valid(node)); + ut_assertok(ofnode_add_subnode(node, "edmund", &subnode)); + check = ofnode_find_subnode(node, "edmund"); + ut_asserteq(check.of_offset, subnode.of_offset); + + return 0; +} +DM_TEST(dm_test_oftree_new, UT_TESTF_SCAN_FDT); + +static int check_copy_node(struct unit_test_state *uts, ofnode dst, ofnode src, + ofnode *nodep) +{ + u32 reg[2], val; + ofnode node; + + ut_assertok(ofnode_copy_node(dst, "copy-test", src, &node)); + + ut_assertok(ofnode_read_u32(node, "ping-expect", &val)); + ut_asserteq(3, val); + + ut_asserteq_str("denx,u-boot-fdt-test", + ofnode_read_string(node, "compatible")); + + /* check that a property with the same name is overwritten */ + ut_assertok(ofnode_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg))); + ut_asserteq(3, reg[0]); + ut_asserteq(1, reg[1]); + + /* reset the compatible so the live tree does not change */ + ut_assertok(ofnode_write_string(node, "compatible", "nothing")); + *nodep = node; + + return 0; +} + +static int dm_test_ofnode_copy_node(struct unit_test_state *uts) +{ + ofnode src, dst, node, try; + + /* + * These nodes are chosen so that the src node is before the destination + * node in the tree. This doesn't matter with livetree, but with + * flattree any attempt to insert a property earlier in the tree will + * mess up the offsets after it. + */ + src = ofnode_path("/b-test"); + dst = ofnode_path("/some-bus"); + + ut_assertok(check_copy_node(uts, dst, src, &node)); + + /* check trying to copy over an existing node */ + ut_asserteq(-EEXIST, ofnode_copy_node(dst, "copy-test", src, &try)); + ut_asserteq(try.of_offset, node.of_offset); + + return 0; +} +DM_TEST(dm_test_ofnode_copy_node, UT_TESTF_SCAN_FDT); + +/* test ofnode_copy_node() with the 'other' tree */ +static int dm_test_ofnode_copy_node_ot(struct unit_test_state *uts) +{ + oftree otree = get_other_oftree(uts); + ofnode src, dst, node; + + src = ofnode_path("/b-test"); + dst = oftree_path(otree, "/node/subnode2"); + ut_assertok(check_copy_node(uts, dst, src, &node)); + + return 0; +} +DM_TEST(dm_test_ofnode_copy_node_ot, UT_TESTF_SCAN_FDT | UT_TESTF_OTHER_FDT); + +static int dm_test_ofnode_delete(struct unit_test_state *uts) +{ + ofnode node; + + /* + * At present the livetree is not restored after changes made in tests. + * See test_pre_run() for how this is done with the other FDT and + * dm_test_pre_run() where it sets up the root-tree pointer. So use + * nodes which don't matter to other tests. + * + * We could fix this by detecting livetree changes and regenerating it + * before the next test if needed. + */ + node = ofnode_path("/leds/iracibble"); + ut_assert(ofnode_valid(node)); + ut_assertok(ofnode_delete(&node)); + ut_assert(!ofnode_valid(node)); + ut_assert(!ofnode_valid(ofnode_path("/leds/iracibble"))); + + node = ofnode_path("/leds/default_on"); + ut_assert(ofnode_valid(node)); + ut_assertok(ofnode_delete(&node)); + ut_assert(!ofnode_valid(node)); + ut_assert(!ofnode_valid(ofnode_path("/leds/default_on"))); + + ut_asserteq(2, ofnode_get_child_count(ofnode_path("/leds"))); + + return 0; +} +DM_TEST(dm_test_ofnode_delete, UT_TESTF_SCAN_FDT); + +static int dm_test_oftree_to_fdt(struct unit_test_state *uts) +{ + oftree tree, check; + struct abuf buf, buf2; + + tree = oftree_default(); + ut_assertok(oftree_to_fdt(tree, &buf)); + ut_assert(abuf_size(&buf) > SZ_16K); + + /* convert it back to a tree and see if it looks OK */ + check = oftree_from_fdt(abuf_data(&buf)); + ut_assert(oftree_valid(check)); + + ut_assertok(oftree_to_fdt(check, &buf2)); + ut_assert(abuf_size(&buf2) > SZ_16K); + ut_asserteq(abuf_size(&buf), abuf_size(&buf2)); + ut_asserteq_mem(abuf_data(&buf), abuf_data(&buf2), abuf_size(&buf)); + + return 0; +} +DM_TEST(dm_test_oftree_to_fdt, UT_TESTF_SCAN_FDT); + +/* test ofnode_read_bool() and ofnode_write_bool() */ +static int dm_test_bool(struct unit_test_state *uts) +{ + const char *propname = "missing-bool-value"; + ofnode node; + + node = ofnode_path("/a-test"); + ut_assert(ofnode_read_bool(node, "bool-value")); + ut_assert(!ofnode_read_bool(node, propname)); + ut_assert(!ofnode_has_property(node, propname)); + + ut_assertok(ofnode_write_bool(node, propname, true)); + ut_assert(ofnode_read_bool(node, propname)); + ut_assert(ofnode_has_property(node, propname)); + ut_assert(ofnode_read_bool(node, "bool-value")); + + ut_assertok(ofnode_write_bool(node, propname, false)); + ut_assert(!ofnode_read_bool(node, propname)); + ut_assert(!ofnode_has_property(node, propname)); + ut_assert(ofnode_read_bool(node, "bool-value")); + + return 0; +} +DM_TEST(dm_test_bool, UT_TESTF_SCAN_FDT); diff --git a/test/dm/pci.c b/test/dm/pci.c index 70a736cfdb..8c5e7da9e6 100644 --- a/test/dm/pci.c +++ b/test/dm/pci.c @@ -301,10 +301,12 @@ static int dm_test_pci_addr_flat(struct unit_test_state *uts) { struct udevice *swap1f, *swap1; ulong io_addr, mem_addr; + fdt_addr_t size; ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &swap1f)); io_addr = dm_pci_read_bar32(swap1f, 0); - ut_asserteq(io_addr, dev_read_addr_pci(swap1f)); + ut_asserteq(io_addr, dev_read_addr_pci(swap1f, &size)); + ut_asserteq(0, size); /* * This device has both I/O and MEM spaces but the MEM space appears @@ -312,7 +314,8 @@ static int dm_test_pci_addr_flat(struct unit_test_state *uts) */ ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1, 0), &swap1)); mem_addr = dm_pci_read_bar32(swap1, 1); - ut_asserteq(mem_addr, dev_read_addr_pci(swap1)); + ut_asserteq(mem_addr, dev_read_addr_pci(swap1, &size)); + ut_asserteq(0, size); return 0; } @@ -329,12 +332,15 @@ DM_TEST(dm_test_pci_addr_flat, UT_TESTF_SCAN_PDATA | UT_TESTF_SCAN_FDT | static int dm_test_pci_addr_live(struct unit_test_state *uts) { struct udevice *swap1f, *swap1; + fdt_size_t size; ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1f, 0), &swap1f)); - ut_asserteq_64(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1f)); + ut_asserteq_64(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1f, &size)); + ut_asserteq(0, size); ut_assertok(dm_pci_bus_find_bdf(PCI_BDF(0, 0x1, 0), &swap1)); - ut_asserteq_64(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1)); + ut_asserteq_64(FDT_ADDR_T_NONE, dev_read_addr_pci(swap1, &size)); + ut_asserteq(0, size); return 0; } diff --git a/test/lib/kconfig.c b/test/lib/kconfig.c index 76225ba8ff..3914f69965 100644 --- a/test/lib/kconfig.c +++ b/test/lib/kconfig.c @@ -22,9 +22,9 @@ static int lib_test_is_enabled(struct unit_test_state *uts) ut_asserteq(0, CONFIG_IS_ENABLED(OF_PLATDATA)); ut_asserteq(0, CONFIG_IS_ENABLED(_UNDEFINED)); - ut_asserteq(0xc000, + ut_asserteq(0xb000, IF_ENABLED_INT(CONFIG_BLOBLIST_FIXED, CONFIG_BLOBLIST_ADDR)); - ut_asserteq(0xc000, + ut_asserteq(0xb000, CONFIG_IF_ENABLED_INT(BLOBLIST_FIXED, BLOBLIST_ADDR)); /* |