diff options
| -rw-r--r-- | arch/arm/dts/kirkwood-nsa310s.dts | 1 | ||||
| -rw-r--r-- | board/CZ.NIC/turris_omnia/turris_omnia.c | 215 | ||||
| -rw-r--r-- | board/alliedtelesis/x530/x530.c | 2 | ||||
| -rw-r--r-- | board/zyxel/nsa310s/nsa310s.c | 119 | ||||
| -rw-r--r-- | board/zyxel/nsa310s/nsa310s.h | 46 | ||||
| -rw-r--r-- | configs/clearfog_defconfig | 1 | ||||
| -rw-r--r-- | configs/nsa310s_defconfig | 6 | ||||
| -rw-r--r-- | configs/turris_omnia_defconfig | 3 | ||||
| -rw-r--r-- | drivers/net/mvgbe.c | 4 | ||||
| -rw-r--r-- | env/sf.c | 22 | ||||
| -rw-r--r-- | include/configs/nsa310s.h | 11 | ||||
| -rw-r--r-- | include/configs/turris_mox.h | 2 | ||||
| -rw-r--r-- | include/configs/turris_omnia.h | 26 |
13 files changed, 221 insertions, 237 deletions
diff --git a/arch/arm/dts/kirkwood-nsa310s.dts b/arch/arm/dts/kirkwood-nsa310s.dts index e1c9c9080c..09ee76c2a2 100644 --- a/arch/arm/dts/kirkwood-nsa310s.dts +++ b/arch/arm/dts/kirkwood-nsa310s.dts @@ -306,6 +306,7 @@ status = "okay"; ethernet0-port@0 { phy-handle = <ðphy0>; + phy-mode = "rgmii"; }; }; diff --git a/board/CZ.NIC/turris_omnia/turris_omnia.c b/board/CZ.NIC/turris_omnia/turris_omnia.c index da2fee578c..b169abca09 100644 --- a/board/CZ.NIC/turris_omnia/turris_omnia.c +++ b/board/CZ.NIC/turris_omnia/turris_omnia.c @@ -41,8 +41,8 @@ DECLARE_GLOBAL_DATA_PTR; #define OMNIA_I2C_EEPROM_CHIP_LEN 2 #define OMNIA_I2C_EEPROM_MAGIC 0x0341a034 -#define SYS_RSTOUT_MASK MVEBU_REGISTER(0x18260) -#define SYS_RSTOUT_MASK_WD BIT(10) +#define A385_SYS_RSTOUT_MASK MVEBU_REGISTER(0x18260) +#define A385_SYS_RSTOUT_MASK_WD BIT(10) #define A385_WDT_GLOBAL_CTRL MVEBU_REGISTER(0x20300) #define A385_WDT_GLOBAL_RATIO_MASK GENMASK(18, 16) @@ -86,7 +86,7 @@ enum status_word_bits { #define OMNIA_GPP_POL_LOW 0x0 #define OMNIA_GPP_POL_MID 0x0 -static struct serdes_map board_serdes_map_pex[] = { +static struct serdes_map board_serdes_map[] = { {PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, @@ -95,15 +95,6 @@ static struct serdes_map board_serdes_map_pex[] = { {SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0} }; -static struct serdes_map board_serdes_map_sata[] = { - {SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0}, - {USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, - {PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, - {USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0}, - {PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}, - {SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0} -}; - static struct udevice *omnia_get_i2c_chip(const char *name, uint addr, uint offset_len) { @@ -189,7 +180,7 @@ static void enable_a385_watchdog(unsigned int timeout_minutes) setbits_32(A385_WD_RSTOUT_UNMASK, A385_WD_RSTOUT_UNMASK_GLOBAL); /* Unmask reset for watchdog */ - clrbits_32(SYS_RSTOUT_MASK, SYS_RSTOUT_MASK_WD); + clrbits_32(A385_SYS_RSTOUT_MASK, A385_SYS_RSTOUT_MASK_WD); } static bool disable_mcu_watchdog(void) @@ -209,13 +200,25 @@ static bool disable_mcu_watchdog(void) return true; } -static bool omnia_detect_sata(void) +static bool omnia_detect_sata(const char *msata_slot) { int ret; u16 stsword; puts("MiniPCIe/mSATA card detection... "); + if (msata_slot) { + if (strcmp(msata_slot, "pcie") == 0) { + puts("forced to MiniPCIe via env\n"); + return false; + } else if (strcmp(msata_slot, "sata") == 0) { + puts("forced to mSATA via env\n"); + return true; + } else if (strcmp(msata_slot, "auto") != 0) { + printf("unsupported env value '%s', fallback to... ", msata_slot); + } + } + ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &stsword, sizeof(stsword)); if (ret) { printf("omnia_mcu_read failed: %i, defaulting to MiniPCIe card\n", @@ -236,16 +239,69 @@ static bool omnia_detect_sata(void) return stsword & MSATA_IND_STSBIT ? true : false; } +static bool omnia_detect_wwan_usb3(const char *wwan_slot) +{ + puts("WWAN slot configuration... "); + + if (wwan_slot && strcmp(wwan_slot, "usb3") == 0) { + puts("USB3.0\n"); + return true; + } + + if (wwan_slot && strcmp(wwan_slot, "pcie") != 0) + printf("unsupported env value '%s', fallback to... ", wwan_slot); + + puts("PCIe+USB2.0\n"); + return false; +} + +void *env_sf_get_env_addr(void) +{ + /* SPI Flash is mapped to address 0xD4000000 only in SPL */ +#ifdef CONFIG_SPL_BUILD + return (void *)0xD4000000 + CONFIG_ENV_OFFSET; +#else + return NULL; +#endif +} + int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count) { - if (omnia_detect_sata()) { - *serdes_map_array = board_serdes_map_sata; - *count = ARRAY_SIZE(board_serdes_map_sata); - } else { - *serdes_map_array = board_serdes_map_pex; - *count = ARRAY_SIZE(board_serdes_map_pex); +#ifdef CONFIG_SPL_ENV_SUPPORT + /* Do not use env_load() as malloc() pool is too small at this stage */ + bool has_env = (env_init() == 0); +#endif + const char *env_value = NULL; + +#ifdef CONFIG_SPL_ENV_SUPPORT + /* beware that env_get() returns static allocated memory */ + env_value = has_env ? env_get("omnia_msata_slot") : NULL; +#endif + + if (omnia_detect_sata(env_value)) { + /* Change SerDes for first mPCIe port (mSATA) from PCIe to SATA */ + board_serdes_map[0].serdes_type = SATA0; + board_serdes_map[0].serdes_speed = SERDES_SPEED_6_GBPS; + board_serdes_map[0].serdes_mode = SERDES_DEFAULT_MODE; + } + +#ifdef CONFIG_SPL_ENV_SUPPORT + /* beware that env_get() returns static allocated memory */ + env_value = has_env ? env_get("omnia_wwan_slot") : NULL; +#endif + + if (omnia_detect_wwan_usb3(env_value)) { + /* Disable SerDes for USB 3.0 pins on the front USB-A port */ + board_serdes_map[1].serdes_type = DEFAULT_SERDES; + /* Change SerDes for third mPCIe port (WWAN) from PCIe to USB 3.0 */ + board_serdes_map[4].serdes_type = USB3_HOST0; + board_serdes_map[4].serdes_speed = SERDES_SPEED_5_GBPS; + board_serdes_map[4].serdes_mode = SERDES_DEFAULT_MODE; } + *serdes_map_array = board_serdes_map; + *count = ARRAY_SIZE(board_serdes_map); + return 0; } @@ -425,7 +481,7 @@ static void handle_reset_button(void) /* Ensure bootcmd_rescue is used by distroboot */ env_set("boot_targets", "rescue"); - printf("RESET button was pressed, overwriting bootcmd!\n"); + printf("RESET button was pressed, overwriting boot_targets!\n"); } else { /* * In case the user somehow managed to save environment with @@ -485,11 +541,58 @@ void spl_board_init(void) #if IS_ENABLED(CONFIG_OF_BOARD_FIXUP) || IS_ENABLED(CONFIG_OF_BOARD_SETUP) -static void fixup_serdes_0_nodes(void *blob) +static void disable_sata_node(void *blob) { - bool mode_sata; int node; + fdt_for_each_node_by_compatible(node, blob, -1, "marvell,armada-380-ahci") { + if (!fdtdec_get_is_enabled(blob, node)) + continue; + + if (fdt_status_disabled(blob, node) < 0) + printf("Cannot disable SATA DT node!\n"); + else + debug("Disabled SATA DT node\n"); + + return; + } + + printf("Cannot find SATA DT node!\n"); +} + +static void disable_pcie_node(void *blob, int port) +{ + int node; + + fdt_for_each_node_by_compatible(node, blob, -1, "marvell,armada-370-pcie") { + int port_node; + + if (!fdtdec_get_is_enabled(blob, node)) + continue; + + fdt_for_each_subnode (port_node, blob, node) { + if (!fdtdec_get_is_enabled(blob, port_node)) + continue; + + if (fdtdec_get_int(blob, port_node, "marvell,pcie-port", -1) != port) + continue; + + if (fdt_status_disabled(blob, port_node) < 0) + printf("Cannot disable PCIe port %d DT node!\n", port); + else + debug("Disabled PCIe port %d DT node\n", port); + + return; + } + } + + printf("Cannot find PCIe port %d DT node!\n", port); +} + +static void fixup_msata_port_nodes(void *blob) +{ + bool mode_sata; + /* * Determine if SerDes 0 is configured to SATA mode. * We do this instead of calling omnia_detect_sata() to avoid another @@ -508,48 +611,38 @@ static void fixup_serdes_0_nodes(void *blob) return; } - /* If mSATA card is not present, disable SATA DT node */ if (!mode_sata) { - fdt_for_each_node_by_compatible(node, blob, -1, - "marvell,armada-380-ahci") { - if (!fdtdec_get_is_enabled(blob, node)) - continue; - - if (fdt_status_disabled(blob, node) < 0) - printf("Cannot disable SATA DT node!\n"); - else - debug("Disabled SATA DT node\n"); - - break; - } - - return; + /* If mSATA card is not present, disable SATA DT node */ + disable_sata_node(blob); + } else { + /* Otherwise disable PCIe port 0 DT node (MiniPCIe / mSATA port) */ + disable_pcie_node(blob, 0); } +} - /* Otherwise disable PCIe port 0 DT node (MiniPCIe / mSATA port) */ - fdt_for_each_node_by_compatible(node, blob, -1, - "marvell,armada-370-pcie") { - int port; - - if (!fdtdec_get_is_enabled(blob, node)) - continue; - - fdt_for_each_subnode (port, blob, node) { - if (!fdtdec_get_is_enabled(blob, port)) - continue; +static void fixup_wwan_port_nodes(void *blob) +{ + bool mode_usb3; - if (fdtdec_get_int(blob, port, "marvell,pcie-port", - -1) != 0) - continue; + /* Determine if SerDes 4 is configured to USB3 mode */ + mode_usb3 = ((readl(MVEBU_REGISTER(0x183fc)) & GENMASK(19, 16)) >> 16) == 4; - if (fdt_status_disabled(blob, port) < 0) - printf("Cannot disable PCIe port 0 DT node!\n"); - else - debug("Disabled PCIe port 0 DT node\n"); + /* If SerDes 4 is not configured to USB3 mode then nothing is needed to fixup */ + if (!mode_usb3) + return; - return; - } + /* + * We're either adding status = "disabled" property, or changing + * status = "okay" to status = "disabled". In both cases we'll need more + * space. Increase the size a little. + */ + if (fdt_increase_size(blob, 32) < 0) { + printf("Cannot increase FDT size!\n"); + return; } + + /* Disable PCIe port 2 DT node (WWAN) */ + disable_pcie_node(blob, 2); } #endif @@ -557,7 +650,8 @@ static void fixup_serdes_0_nodes(void *blob) #if IS_ENABLED(CONFIG_OF_BOARD_FIXUP) int board_fix_fdt(void *blob) { - fixup_serdes_0_nodes(blob); + fixup_msata_port_nodes(blob); + fixup_wwan_port_nodes(blob); return 0; } @@ -702,7 +796,8 @@ fail: int ft_board_setup(void *blob, struct bd_info *bd) { fixup_spi_nor_partitions(blob); - fixup_serdes_0_nodes(blob); + fixup_msata_port_nodes(blob); + fixup_wwan_port_nodes(blob); return 0; } diff --git a/board/alliedtelesis/x530/x530.c b/board/alliedtelesis/x530/x530.c index c0ec2afa30..cbf4533e78 100644 --- a/board/alliedtelesis/x530/x530.c +++ b/board/alliedtelesis/x530/x530.c @@ -93,7 +93,7 @@ int board_early_init_f(void) writel(0x55550550, MVEBU_MPP_BASE + 0x0c); writel(0x55555555, MVEBU_MPP_BASE + 0x10); writel(0x00100565, MVEBU_MPP_BASE + 0x14); - writel(0x40000000, MVEBU_MPP_BASE + 0x18); + writel(0x00000000, MVEBU_MPP_BASE + 0x18); writel(0x00004444, MVEBU_MPP_BASE + 0x1c); return 0; diff --git a/board/zyxel/nsa310s/nsa310s.c b/board/zyxel/nsa310s/nsa310s.c index b71de4e11f..b3ea660891 100644 --- a/board/zyxel/nsa310s/nsa310s.c +++ b/board/zyxel/nsa310s/nsa310s.c @@ -1,22 +1,49 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2015, 2021 Tony Dinh <mibodhi@gmail.com> + * Copyright (C) 2015, 2021-2022 Tony Dinh <mibodhi@gmail.com> * Copyright (C) 2015 Gerald Kerma <dreagle@doukki.net> */ #include <common.h> #include <init.h> -#include <miiphy.h> -#include <net.h> +#include <netdev.h> #include <asm/arch/cpu.h> #include <asm/arch/soc.h> #include <asm/arch/mpp.h> #include <asm/global_data.h> #include <asm/io.h> -#include "nsa310s.h" +#include <linux/bitops.h> DECLARE_GLOBAL_DATA_PTR; +/* + * low GPIO's + */ +#define HDD1_GREEN_LED BIT(16) +#define HDD1_RED_LED BIT(13) +#define USB_GREEN_LED BIT(15) +#define USB_POWER BIT(21) +#define SYS_GREEN_LED BIT(28) +#define SYS_ORANGE_LED BIT(29) + +#define COPY_GREEN_LED BIT(22) +#define COPY_RED_LED BIT(23) + +#define PIN_USB_GREEN_LED 15 +#define PIN_USB_POWER 21 + +#define NSA310S_OE_LOW (~(0)) +#define NSA310S_VAL_LOW (SYS_GREEN_LED | USB_POWER) + +/* + * high GPIO's + */ +#define HDD2_GREEN_LED BIT(2) +#define HDD2_POWER BIT(1) + +#define NSA310S_OE_HIGH (~(0)) +#define NSA310S_VAL_HIGH (HDD2_POWER) + int board_early_init_f(void) { /* @@ -80,87 +107,7 @@ int board_init(void) return 0; } -static int fdt_get_phy_addr(const char *path) -{ - const void *fdt = gd->fdt_blob; - const u32 *reg; - const u32 *val; - int node, phandle, addr; - - /* Find the node by its full path */ - node = fdt_path_offset(fdt, path); - if (node >= 0) { - /* Look up phy-handle */ - val = fdt_getprop(fdt, node, "phy-handle", NULL); - if (val) { - phandle = fdt32_to_cpu(*val); - if (!phandle) - return -1; - /* Follow it to its node */ - node = fdt_node_offset_by_phandle(fdt, phandle); - if (node) { - /* Look up reg */ - reg = fdt_getprop(fdt, node, "reg", NULL); - if (reg) { - addr = fdt32_to_cpu(*reg); - return addr; - } - } - } - } - return -1; -} - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) +int board_eth_init(struct bd_info *bis) { - u16 reg; - u16 phyaddr; - char *name = "ethernet-controller@72000"; - char *eth0_path = "/ocp@f1000000/ethernet-controller@72000/ethernet0-port@0"; - - if (miiphy_set_current_dev(name)) - return; - - phyaddr = fdt_get_phy_addr(eth0_path); - if (phyaddr < 0) - return; - - /* set RGMII delay */ - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_MAC_CTRL_PG); - miiphy_read(name, phyaddr, MV88E1318_MAC_CTRL_REG, ®); - reg |= (MV88E1318_RGMII_RX_CTRL | MV88E1318_RGMII_TX_CTRL); - miiphy_write(name, phyaddr, MV88E1318_MAC_CTRL_REG, reg); - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0); - - /* reset PHY */ - if (miiphy_reset(name, phyaddr)) - return; - - /* - * ZyXEL NSA310S uses the 88E1310S Alaska (interface identical to 88E1318) - * and has an MCU attached to the LED[2] via tristate interrupt - */ - - /* switch to LED register page */ - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, MV88E1318_LED_PG); - /* read out LED polarity register */ - miiphy_read(name, phyaddr, MV88E1318_LED_POL_REG, ®); - /* clear 4, set 5 - LED2 low, tri-state */ - reg &= ~(MV88E1318_LED2_4); - reg |= (MV88E1318_LED2_5); - /* write back LED polarity register */ - miiphy_write(name, phyaddr, MV88E1318_LED_POL_REG, reg); - /* jump back to page 0, per the PHY chip documenation. */ - miiphy_write(name, phyaddr, MV88E1318_PGADR_REG, 0); - - /* set PHY back to auto-negotiation mode */ - miiphy_write(name, phyaddr, 0x4, 0x1e1); - miiphy_write(name, phyaddr, 0x9, 0x300); - /* downshift */ - miiphy_write(name, phyaddr, 0x10, 0x3860); - miiphy_write(name, phyaddr, 0x0, 0x9140); - - printf("MV88E1318 PHY initialized on %s\n", name); + return cpu_eth_init(bis); } -#endif /* CONFIG_RESET_PHY_R */ diff --git a/board/zyxel/nsa310s/nsa310s.h b/board/zyxel/nsa310s/nsa310s.h deleted file mode 100644 index d8bd9a586f..0000000000 --- a/board/zyxel/nsa310s/nsa310s.h +++ /dev/null @@ -1,46 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015 - * Gerald Kerma <dreagle@doukki.net> - * Tony Dinh <mibodhi@gmail.com> - */ - -#ifndef __NSA310S_H -#define __NSA310S_H - -/* low GPIO's */ -#define HDD1_GREEN_LED (1 << 16) -#define HDD1_RED_LED (1 << 13) -#define USB_GREEN_LED (1 << 15) -#define USB_POWER (1 << 21) -#define SYS_GREEN_LED (1 << 28) -#define SYS_ORANGE_LED (1 << 29) - -#define COPY_GREEN_LED (1 << 22) -#define COPY_RED_LED (1 << 23) - -#define PIN_USB_GREEN_LED 15 -#define PIN_USB_POWER 21 - -#define NSA310S_OE_LOW (~(0)) -#define NSA310S_VAL_LOW (SYS_GREEN_LED | USB_POWER) - -/* high GPIO's */ -#define HDD2_GREEN_LED (1 << 2) -#define HDD2_POWER (1 << 1) - -#define NSA310S_OE_HIGH (~(0)) -#define NSA310S_VAL_HIGH (HDD2_POWER) - -/* PHY related */ -#define MV88E1318_PGADR_REG 22 -#define MV88E1318_MAC_CTRL_PG 2 -#define MV88E1318_MAC_CTRL_REG 21 -#define MV88E1318_RGMII_TX_CTRL (1 << 4) -#define MV88E1318_RGMII_RX_CTRL (1 << 5) -#define MV88E1318_LED_PG 3 -#define MV88E1318_LED_POL_REG 17 -#define MV88E1318_LED2_4 (1 << 4) -#define MV88E1318_LED2_5 (1 << 5) - -#endif /* __NSA310S_H */ diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig index 880f16a6e0..1e9c389deb 100644 --- a/configs/clearfog_defconfig +++ b/configs/clearfog_defconfig @@ -34,7 +34,6 @@ CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_SPI=y CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set CONFIG_CMD_TFTPPUT=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig index e4902d4277..ff015e36a5 100644 --- a/configs/nsa310s_defconfig +++ b/configs/nsa310s_defconfig @@ -2,6 +2,7 @@ CONFIG_ARM=y CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_SYS_DCACHE_OFF=y CONFIG_ARCH_CPU_INIT=y +CONFIG_SYS_THUMB_BUILD=y CONFIG_ARCH_KIRKWOOD=y CONFIG_SYS_KWD_CONFIG="board/zyxel/nsa310s/kwbimage.cfg" CONFIG_SYS_TEXT_BASE=0x600000 @@ -18,9 +19,8 @@ CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs ${console} ${mtdparts} ${bootargs_root}; ubi part root; ubifsmount ubi:rootfs; ubifsload 0x800000 ${kernel}; ubifsload 0x700000 ${fdt}; ubifsumount; fdt addr 0x700000; fdt resize; fdt chosen; bootz 0x800000 - 0x700000" CONFIG_USE_PREBOOT=y # CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_RESET_PHY_R=y CONFIG_HUSH_PARSER=y -CONFIG_SYS_PROMPT="nsa310s => " +CONFIG_SYS_PROMPT="NSA310s> " CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_NAND=y @@ -32,6 +32,7 @@ CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y CONFIG_CMD_JFFS2=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:0xe0000@0x0(uboot),0x20000@0xe0000(uboot_env),0x100000@0x100000(second_stage_uboot),-@0x200000(root)" @@ -50,6 +51,7 @@ CONFIG_SYS_SATA_MAX_DEVICE=1 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y +CONFIG_PHY_MARVELL=y CONFIG_DM_ETH=y CONFIG_MVGBE=y CONFIG_MII=y diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index ad56d3824b..5591c9716b 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -37,6 +37,7 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_MISC_INIT_R=y CONFIG_SPL_BOARD_INIT=y +CONFIG_SPL_ENV_SUPPORT=y CONFIG_SPL_I2C=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y @@ -63,6 +64,8 @@ CONFIG_CMD_FS_UUID=y # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_ENV_OVERWRITE=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_USE_ETHPRIME=y +CONFIG_ETHPRIME="ethernet@34000" CONFIG_ARP_TIMEOUT=200 CONFIG_NET_RETRY_COUNT=50 CONFIG_SPL_OF_TRANSLATE=y diff --git a/drivers/net/mvgbe.c b/drivers/net/mvgbe.c index bf5ed5513b..a77c057432 100644 --- a/drivers/net/mvgbe.c +++ b/drivers/net/mvgbe.c @@ -43,6 +43,7 @@ DECLARE_GLOBAL_DATA_PTR; #define MV_PHY_ADR_REQUEST 0xee #define MVGBE_SMI_REG (((struct mvgbe_registers *)MVGBE0_BASE)->smi) +#define MVGBE_PGADR_REG 22 #if defined(CONFIG_PHYLIB) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII) static int smi_wait_ready(struct mvgbe_device *dmvgbe) @@ -745,6 +746,9 @@ static struct phy_device *__mvgbe_phy_init(struct eth_device *dev, miiphy_write(dev->name, MV_PHY_ADR_REQUEST, MV_PHY_ADR_REQUEST, phyid); + /* Make sure the selected PHY page is 0 before connecting */ + miiphy_write(dev->name, phyid, MVGBE_PGADR_REG, 0); + phydev = phy_connect(bus, phyid, dev, phy_interface); if (!phydev) { printf("phy_connect failed\n"); @@ -24,10 +24,6 @@ #include <dm/device-internal.h> #include <u-boot/crc.h> -#ifndef CONFIG_SPL_BUILD -#define INITENV -#endif - #define OFFSET_INVALID (~(u32)0) #ifdef CONFIG_ENV_OFFSET_REDUND @@ -322,14 +318,15 @@ done: return ret; } -#if CONFIG_ENV_ADDR != 0x0 __weak void *env_sf_get_env_addr(void) { +#ifndef CONFIG_SPL_BUILD return (void *)CONFIG_ENV_ADDR; -} +#else + return NULL; #endif +} -#if defined(INITENV) && (CONFIG_ENV_ADDR != 0x0) /* * check if Environment on CONFIG_ENV_ADDR is valid. */ @@ -337,6 +334,9 @@ static int env_sf_init_addr(void) { env_t *env_ptr = (env_t *)env_sf_get_env_addr(); + if (!env_ptr) + return -ENOENT; + if (crc32(0, env_ptr->data, ENV_SIZE) == env_ptr->crc) { gd->env_addr = (ulong)&(env_ptr->data); gd->env_valid = ENV_VALID; @@ -346,7 +346,6 @@ static int env_sf_init_addr(void) return 0; } -#endif #if defined(CONFIG_ENV_SPI_EARLY) /* @@ -432,9 +431,10 @@ out: static int env_sf_init(void) { -#if defined(INITENV) && (CONFIG_ENV_ADDR != 0x0) - return env_sf_init_addr(); -#elif defined(CONFIG_ENV_SPI_EARLY) + int ret = env_sf_init_addr(); + if (ret != -ENOENT) + return ret; +#ifdef CONFIG_ENV_SPI_EARLY return env_sf_init_early(); #endif /* diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index 485a3fe42d..1e6b8d8b0e 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright (C) 2015, 2021 Tony Dinh <mibodhi@gmail.com> + * Copyright (C) 2015, 2021-2022 Tony Dinh <mibodhi@gmail.com> * Copyright (C) 2015 * Gerald Kerma <dreagle@doukki.net> * Luka Perkov <luka.perkov@sartura.hr> @@ -11,8 +11,6 @@ #include "mv-common.h" -/* environment variables configuration */ - /* default environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -24,14 +22,11 @@ "bootargs_root=ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs rw\0" /* Ethernet driver configuration */ -#ifdef CONFIG_CMD_NET #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 1 -#endif /* CONFIG_CMD_NET */ -/* SATA driver configuration */ -#ifdef CONFIG_SATA +/* Support large HDDs for USB and SATA */ #define CONFIG_LBA48 -#endif /* CONFIG_SATA */ +#define CONFIG_SYS_64BIT_LBA #endif /* _CONFIG_NSA310S_H */ diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h index dc2fdcc654..6640ee495d 100644 --- a/include/configs/turris_mox.h +++ b/include/configs/turris_mox.h @@ -25,6 +25,8 @@ #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ + func(NVME, nvme, 0) \ + func(SCSI, scsi, 0) \ func(USB, usb, 0) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h index b35299b2fb..8119340b11 100644 --- a/include/configs/turris_omnia.h +++ b/include/configs/turris_omnia.h @@ -52,28 +52,11 @@ /* Include the common distro boot environment */ #ifndef CONFIG_SPL_BUILD -#ifdef CONFIG_MMC -#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) -#else -#define BOOT_TARGET_DEVICES_MMC(func) -#endif - -#ifdef CONFIG_USB_STORAGE -#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) -#else -#define BOOT_TARGET_DEVICES_USB(func) -#endif - -#ifdef CONFIG_SCSI -#define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) -#else -#define BOOT_TARGET_DEVICES_SCSI(func) -#endif - #define BOOT_TARGET_DEVICES(func) \ - BOOT_TARGET_DEVICES_MMC(func) \ - BOOT_TARGET_DEVICES_SCSI(func) \ - BOOT_TARGET_DEVICES_USB(func) \ + func(MMC, mmc, 0) \ + func(NVME, nvme, 0) \ + func(SCSI, scsi, 0) \ + func(USB, usb, 0) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) @@ -119,7 +102,6 @@ LOAD_ADDRESS_ENV_SETTINGS \ "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ "console=ttyS0,115200\0" \ - "ethact=ethernet@34000\0" \ "bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \ BOOTENV |