imx: scu_api: update to version 1.16 and add more APIs

Upgrade SCFW API to 1.16
Add more APIs:
 sc_misc_get_button_status
 sc_pm_reboot
 sc_seco_v2x_build_info

Signed-off-by: Peng Fan <peng.fan@nxp.com>

5 files changed, 169 insertions, 19 deletions

diff --git a/include/firmware/imx/sci/svc/misc/api.h b/include/firmware/imx/sci/svc/misc/api.h
index 3629eb68d7..a4b92b86cc 100644
--- a/include/firmware/imx/sci/svc/misc/api.h
+++ b/include/firmware/imx/sci/svc/misc/api.h
@@ -5,27 +5,45 @@
 
 #ifndef SC_MISC_API_H
 #define SC_MISC_API_H
+/* Defines for type widths */
+#define SC_MISC_DMA_GRP_W       5U      /* Width of sc_misc_dma_group_t */
 
+/* Max DMA channel priority group */
+#define SC_MISC_DMA_GRP_MAX     31U
 /* Defines for sc_misc_boot_status_t */
 #define SC_MISC_BOOT_STATUS_SUCCESS	0U	/* Success */
 #define SC_MISC_BOOT_STATUS_SECURITY	1U	/* Security violation */
 
-/* Defines for sc_misc_seco_auth_cmd_t */
-#define SC_MISC_SECO_AUTH_SECO_FW	0U   /* SECO Firmware */
-#define SC_MISC_SECO_AUTH_HDMI_TX_FW	1U   /* HDMI TX Firmware */
-#define SC_MISC_SECO_AUTH_HDMI_RX_FW	2U   /* HDMI RX Firmware */
-
 /* Defines for sc_misc_temp_t */
-#define SC_MISC_TEMP			0U	/* Temp sensor */
-#define SC_MISC_TEMP_HIGH		1U	/* Temp high alarm */
-#define SC_MISC_TEMP_LOW		2U	/* Temp low alarm */
+#define SC_MISC_TEMP                    0U   /* Temp sensor */
+#define SC_MISC_TEMP_HIGH               1U   /* Temp high alarm */
+#define SC_MISC_TEMP_LOW                2U   /* Temp low alarm */
+
+/* Defines for sc_misc_bt_t */
+#define SC_MISC_BT_PRIMARY              0U   /* Primary boot */
+#define SC_MISC_BT_SECONDARY            1U   /* Secondary boot */
+#define SC_MISC_BT_RECOVERY             2U   /* Recovery boot */
+#define SC_MISC_BT_MANUFACTURE          3U   /* Manufacture boot */
+#define SC_MISC_BT_SERIAL               4U   /* Serial boot */
+/* Types */
 
-/* Defines for sc_misc_seco_auth_cmd_t */
-#define SC_MISC_AUTH_CONTAINER	0U	/* Authenticate container */
-#define SC_MISC_VERIFY_IMAGE	1U	/* Verify image */
-#define SC_MISC_REL_CONTAINER	2U	/* Release container */
+/*
+ * This type is used to store a DMA channel priority group.
+ */
+typedef u8 sc_misc_dma_group_t;
 
+/*
+ * This type is used report boot status.
+ */
 typedef u8 sc_misc_boot_status_t;
+
+/*
+ * This type is used report boot status.
+ */
 typedef u8 sc_misc_temp_t;
 
+/*
+ * This type is used report the boot type.
+ */
+typedef u8 sc_misc_bt_t;
 #endif /* SC_MISC_API_H */
diff --git a/include/firmware/imx/sci/svc/pm/api.h b/include/firmware/imx/sci/svc/pm/api.h
index 9008b85c6f..d1b085d7f8 100644
--- a/include/firmware/imx/sci/svc/pm/api.h
+++ b/include/firmware/imx/sci/svc/pm/api.h
@@ -6,6 +6,14 @@
 #ifndef SC_PM_API_H
 #define SC_PM_API_H
 
+#include <firmware/imx/sci/types.h>
+/* Defines for type widths */
+#define SC_PM_POWER_MODE_W      2U      /* Width of sc_pm_power_mode_t */
+#define SC_PM_CLOCK_MODE_W      3U      /* Width of sc_pm_clock_mode_t */
+#define SC_PM_RESET_TYPE_W      2U      /* Width of sc_pm_reset_type_t */
+#define SC_PM_RESET_REASON_W    4U      /* Width of sc_pm_reset_reason_t */
+/* Defines for ALL parameters */
+#define SC_PM_CLK_ALL   ((sc_pm_clk_t)UINT8_MAX)   /* All clocks */
 /* Defines for sc_pm_power_mode_t */
 #define SC_PM_PW_MODE_OFF	0U /* Power off */
 #define SC_PM_PW_MODE_STBY	1U /* Power in standby */
@@ -35,10 +43,96 @@
 #define SC_PM_CLK_MODE_AUTOGATE_HW	4U /* Clock is in HW autogate mode */
 #define SC_PM_CLK_MODE_AUTOGATE_SW_HW	5U /* Clock is in SW-HW autogate mode */
 
+/* Defines for sc_pm_clk_parent_t */
+#define SC_PM_PARENT_XTAL              0U    /*!< Parent is XTAL. */
+#define SC_PM_PARENT_PLL0              1U    /*!< Parent is PLL0 */
+#define SC_PM_PARENT_PLL1              2U    /*!< Parent is PLL1 or PLL0/2 */
+#define SC_PM_PARENT_PLL2              3U    /*!< Parent in PLL2 or PLL0/4 */
+#define SC_PM_PARENT_BYPS              4U    /*!< Parent is a bypass clock. */
+
+/* Defines for sc_pm_reset_type_t */
+#define SC_PM_RESET_TYPE_COLD          0U    /* Cold reset */
+#define SC_PM_RESET_TYPE_WARM          1U    /* Warm reset */
+#define SC_PM_RESET_TYPE_BOARD         2U    /* Board reset */
+
+/* Defines for sc_pm_reset_reason_t */
+#define SC_PM_RESET_REASON_POR         0U    /* Power on reset */
+#define SC_PM_RESET_REASON_JTAG        1U    /* JTAG reset */
+#define SC_PM_RESET_REASON_SW          2U    /* Software reset */
+#define SC_PM_RESET_REASON_WDOG        3U    /* Partition watchdog reset */
+#define SC_PM_RESET_REASON_LOCKUP      4U    /* SCU lockup reset */
+#define SC_PM_RESET_REASON_SNVS        5U    /* SNVS reset */
+#define SC_PM_RESET_REASON_TEMP        6U    /* Temp panic reset */
+#define SC_PM_RESET_REASON_MSI         7U    /* MSI reset */
+#define SC_PM_RESET_REASON_UECC        8U    /* ECC reset */
+#define SC_PM_RESET_REASON_SCFW_WDOG   9U    /* SCFW watchdog reset */
+#define SC_PM_RESET_REASON_ROM_WDOG    10U   /* SCU ROM watchdog reset */
+#define SC_PM_RESET_REASON_SECO        11U   /* SECO reset */
+#define SC_PM_RESET_REASON_SCFW_FAULT  12U   /* SCFW fault reset */
+
+/* Defines for sc_pm_sys_if_t */
+#define SC_PM_SYS_IF_INTERCONNECT       0U   /* System interconnect */
+#define SC_PM_SYS_IF_MU                 1U   /* AP -> SCU message units */
+#define SC_PM_SYS_IF_OCMEM              2U   /* On-chip memory (ROM/OCRAM) */
+#define SC_PM_SYS_IF_DDR                3U   /* DDR memory */
+
+/* Defines for sc_pm_wake_src_t */
+/* No wake source, used for self-kill */
+#define SC_PM_WAKE_SRC_NONE             0U
+/* Wakeup from SCU to resume CPU (IRQSTEER & GIC powered down) */
+#define SC_PM_WAKE_SRC_SCU              1U
+/* Wakeup from IRQSTEER to resume CPU (GIC powered down) */
+#define SC_PM_WAKE_SRC_IRQSTEER         2U
+/* Wakeup from IRQSTEER+GIC to wake CPU (GIC clock gated) */
+#define SC_PM_WAKE_SRC_IRQSTEER_GIC     3U
+/* Wakeup from GIC to wake CPU */
+#define SC_PM_WAKE_SRC_GIC              4U
+/* Types */
+
+/*
+ * This type is used to declare a power mode. Note resources only use
+ * SC_PM_PW_MODE_OFF and SC_PM_PW_MODE_ON. The other modes are used only
+ * as system power modes.
+ */
 typedef u8 sc_pm_power_mode_t;
+
+/*
+ * This type is used to declare a clock.
+ */
 typedef u8 sc_pm_clk_t;
+
+/*
+ * This type is used to declare a clock mode.
+ */
 typedef u8 sc_pm_clk_mode_t;
+
+/*
+ * This type is used to declare the clock parent.
+ */
 typedef u8 sc_pm_clk_parent_t;
+
+/*
+ * This type is used to declare clock rates.
+ */
 typedef u32 sc_pm_clock_rate_t;
 
+/*
+ * This type is used to declare a desired reset type.
+ */
+typedef u8 sc_pm_reset_type_t;
+
+/*
+ * This type is used to declare a reason for a reset.
+ */
+typedef u8 sc_pm_reset_reason_t;
+
+/*
+ * This type is used to specify a system-level interface to be power managed.
+ */
+typedef u8 sc_pm_sys_if_t;
+
+/*
+ * This type is used to specify a wake source for CPU resources.
+ */
+typedef u8 sc_pm_wake_src_t;
 #endif /* SC_PM_API_H */
diff --git a/include/firmware/imx/sci/svc/rm/api.h b/include/firmware/imx/sci/svc/rm/api.h
index 163d81403c..f4e9abcd9b 100644
--- a/include/firmware/imx/sci/svc/rm/api.h
+++ b/include/firmware/imx/sci/svc/rm/api.h
@@ -38,32 +38,36 @@
 
 /* Types */
 
-/*!
+/*
  * This type is used to declare a resource partition.
  */
 typedef u8 sc_rm_pt_t;
 
-/*!
+/*
  * This type is used to declare a memory region.
  */
 typedef u8 sc_rm_mr_t;
 
-/*!
+/*
  * This type is used to declare a resource domain ID used by the
  * isolation HW.
  */
 typedef u8 sc_rm_did_t;
 
-/*!
+/*
  * This type is used to declare an SMMU StreamID.
  */
 typedef u16 sc_rm_sid_t;
 
-/*!
+/*
  * This type is a used to declare master transaction attributes.
  */
 typedef u8 sc_rm_spa_t;
 
+/*
+ * This type is used to declare a resource/memory region access permission.
+ * Refer to the XRDC2 Block Guide for more information.
+ */
 typedef u8 sc_rm_perm_t;
 
 #endif /* SC_RM_API_H */
diff --git a/include/firmware/imx/sci/svc/seco/api.h b/include/firmware/imx/sci/svc/seco/api.h
index 6e9c302315..7d4b6b92e1 100644
--- a/include/firmware/imx/sci/svc/seco/api.h
+++ b/include/firmware/imx/sci/svc/seco/api.h
@@ -17,6 +17,7 @@
 #define SC_SECO_AUTH_SECO_FW            3U   /* SECO Firmware */
 #define SC_SECO_AUTH_HDMI_TX_FW         4U   /* HDMI TX Firmware */
 #define SC_SECO_AUTH_HDMI_RX_FW         5U   /* HDMI RX Firmware */
+#define SC_SECO_EVERIFY_IMAGE           6U   /* Enhanced verify image */
 
 #define SC_SECO_RNG_STAT_UNAVAILABLE    0U  /* Unable to initialize the RNG */
 #define SC_SECO_RNG_STAT_INPROGRESS     1U  /* Initialization is on-going */
@@ -24,12 +25,12 @@
 
 /* Types */
 
-/*!
+/*
  * This type is used to issue SECO authenticate commands.
  */
 typedef u8 sc_seco_auth_cmd_t;
 
-/*!
+/*
  * This type is used to return the RNG initialization status.
  */
 typedef u32 sc_seco_rng_stat_t;
diff --git a/include/firmware/imx/sci/svc/timer/api.h b/include/firmware/imx/sci/svc/timer/api.h
new file mode 100644
index 0000000000..c2fe34aa75
--- /dev/null
+++ b/include/firmware/imx/sci/svc/timer/api.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier:     GPL-2.0+ */
+/*
+ * Copyright 2018-2019 NXP
+ */
+
+#ifndef SC_TIMER_API_H
+#define SC_TIMER_API_H
+
+/* Defines */
+
+/* Defines for type widths */
+#define SC_TIMER_ACTION_W   3U      /* Width of sc_timer_wdog_action_t */
+
+/* Defines for sc_timer_wdog_action_t */
+#define SC_TIMER_WDOG_ACTION_PARTITION      0U   /* Reset partition */
+#define SC_TIMER_WDOG_ACTION_WARM           1U   /* Warm reset system */
+#define SC_TIMER_WDOG_ACTION_COLD           2U   /* Cold reset system */
+#define SC_TIMER_WDOG_ACTION_BOARD          3U   /* Reset board */
+#define SC_TIMER_WDOG_ACTION_IRQ            4U   /* Only generate IRQs */
+
+/* Types */
+
+/*
+ * This type is used to configure the watchdog action.
+ */
+typedef u8 sc_timer_wdog_action_t;
+
+/*
+ * This type is used to declare a watchdog time value in milliseconds.
+ */
+typedef u32 sc_timer_wdog_time_t;
+
+#endif /* SC_TIMER_API_H */