Merge branch '2023-10-30-assorted-general-updates'

- Two Kconfig content fixes, fix some issues reported by Coverity,
  resync get_maintainer.pl (two small fixees), update i2c_eeprom, and
  fix an off by one in addrmap_set_entry

10 files changed, 12 insertions, 12 deletions

diff --git a/drivers/crypto/fsl/Kconfig b/drivers/crypto/fsl/Kconfig
index 91a51cc5fe..eaad19633f 100644
--- a/drivers/crypto/fsl/Kconfig
+++ b/drivers/crypto/fsl/Kconfig
@@ -77,7 +77,6 @@ endif
 config FSL_DCP_RNG
 	bool "Enable Random Number Generator support"
 	depends on DM_RNG
-	default n
 	help
 	  Enable support for the hardware based random number generator
 	  module of the DCP. It uses the True Random Number Generator (TRNG)
diff --git a/drivers/firmware/arm-ffa/arm-ffa-uclass.c b/drivers/firmware/arm-ffa/arm-ffa-uclass.c
index 8c17b19eaf..f1e91d151e 100644
--- a/drivers/firmware/arm-ffa/arm-ffa-uclass.c
+++ b/drivers/firmware/arm-ffa/arm-ffa-uclass.c
@@ -144,8 +144,6 @@ static int ffa_print_error_log(u32 ffa_id, int ffa_errno)
 		return -EINVAL;
 
 	abi_idx = FFA_ID_TO_ERRMAP_ID(ffa_id);
-	if (abi_idx < 0 || abi_idx >= FFA_ERRMAP_COUNT)
-		return -EINVAL;
 
 	if (!err_msg_map[abi_idx].err_str[err_idx])
 		return -EINVAL;
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 22cb9d637c..d10edd2774 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -61,7 +61,6 @@ config TI_GPMC
 if TI_GPMC
 config TI_GPMC_DEBUG
 	bool "Debug Texas Instruments GPMC timings"
-	default n
 	help
 	  Enable this to print GPMC timings before and after the GPMC registers
 	  are programmed. This should not be left enabled on production systems.
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index fccd9b89b8..97057de8bf 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -375,7 +375,6 @@ config SPL_MXC_OCOTP
 config NPCM_OTP
 	bool "Nnvoton NPCM BMC On-Chip OTP Memory Support"
 	depends on (ARM && ARCH_NPCM)
-	default n
 	help
 	  Support NPCM BMC OTP memory (fuse).
 	  To compile this driver as a module, choose M here: the module
diff --git a/drivers/misc/i2c_eeprom.c b/drivers/misc/i2c_eeprom.c
index e1d0b8f918..9111bd724c 100644
--- a/drivers/misc/i2c_eeprom.c
+++ b/drivers/misc/i2c_eeprom.c
@@ -60,6 +60,17 @@ static int i2c_eeprom_std_read(struct udevice *dev, int offset, uint8_t *buf,
 	return dm_i2c_read(dev, offset, buf, size);
 }
 
+static int i2c_eeprom_len(int offset, int len, int pagesize)
+{
+	int page_offset = offset & (pagesize - 1);
+	int maxlen = pagesize - page_offset;
+
+	if (len > maxlen)
+		len = maxlen;
+
+	return len;
+}
+
 static int i2c_eeprom_std_write(struct udevice *dev, int offset,
 				const uint8_t *buf, int size)
 {
@@ -67,7 +78,7 @@ static int i2c_eeprom_std_write(struct udevice *dev, int offset,
 	int ret;
 
 	while (size > 0) {
-		int write_size = min_t(int, size, priv->pagesize);
+		int write_size = i2c_eeprom_len(offset, size, priv->pagesize);
 
 		ret = dm_i2c_write(dev, offset, buf, write_size);
 		if (ret)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 72547f00fb..a13e6f59cb 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -614,7 +614,6 @@ config ROCKCHIP_NAND
 config ROCKCHIP_NAND_SKIP_BBTSCAN
 	bool "Skip the automatic BBT scan with Rockchip NAND controllers"
 	depends on ROCKCHIP_NAND
-	default n
 	help
 	  Skip the automatic BBT scan with the NAND_SKIP_BBTSCAN
 	  option when data content is not in MTD format or
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index a9617c6c58..76c424d75e 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -107,7 +107,6 @@ config SPI_FLASH_SMART_HWCAPS
 
 config SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT
 	bool "Command extension type is INVERT for Software Reset on boot"
-	default n
 	help
 	 Because of SFDP information can not be get before boot.
 	 So define command extension type is INVERT when Software Reset on boot only.
diff --git a/drivers/sm/Kconfig b/drivers/sm/Kconfig
index f0987275d2..926af28633 100644
--- a/drivers/sm/Kconfig
+++ b/drivers/sm/Kconfig
@@ -4,6 +4,5 @@ config SM
 config MESON_SM
 	bool "Amlogic Secure Monitor driver"
 	select SM
-	default n
 	help
 	  Say y here to enable the Amlogic secure monitor driver.
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 66cf727113..69b184b0d9 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -460,7 +460,6 @@ config SANDBOX_SPI_MAX_CS
 config SPI_ASPEED_SMC
 	bool "ASPEED SPI flash controller driver"
 	depends on DM_SPI && SPI_MEM
-	default n
 	help
 	  Enable ASPEED SPI flash controller driver for AST2500
 	  and AST2600 SoCs.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1a883babf4..b501ea514b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -231,7 +231,6 @@ config USB_EHCI_MXS
 config USB_EHCI_NPCM
 	bool "Support for Nuvoton NPCM on-chip EHCI USB controller"
 	depends on ARCH_NPCM
-	default n
 	---help---
 	  Enables support for the on-chip EHCI controller on
 	  Nuvoton NPCM chips.
@@ -368,7 +367,6 @@ config USB_OHCI_DA8XX
 config USB_OHCI_NPCM
 	bool "Support for Nuvoton NPCM on-chip OHCI USB controller"
 	depends on ARCH_NPCM
-	default n
 	---help---
 	  Enables support for the on-chip OHCI controller on
 	  Nuvoton NPCM chips.