net: fm: Remove non-DM_ETH code

As DM_ETH is required for all network drivers, it's now safe to remove
the non-DM_ETH support code.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 386 deletions

diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
deleted file mode 100644
index 618c1bccbe..0000000000
--- a/drivers/net/fm/init.c
+++ /dev/null
@@ -1,386 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2011-2015 Freescale Semiconductor, Inc.
- */
-#include <errno.h>
-#include <common.h>
-#include <net.h>
-#include <asm/io.h>
-#include <fdt_support.h>
-#include <fsl_mdio.h>
-#ifdef CONFIG_FSL_LAYERSCAPE
-#include <asm/arch/fsl_serdes.h>
-#include <linux/libfdt.h>
-#else
-#include <asm/fsl_serdes.h>
-#endif
-
-#include "fm.h"
-
-#ifndef CONFIG_DM_ETH
-struct fm_eth_info fm_info[] = {
-#if (CFG_SYS_NUM_FM1_DTSEC >= 1)
-	FM_DTSEC_INFO_INITIALIZER(1, 1),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 2)
-	FM_DTSEC_INFO_INITIALIZER(1, 2),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 3)
-	FM_DTSEC_INFO_INITIALIZER(1, 3),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 4)
-	FM_DTSEC_INFO_INITIALIZER(1, 4),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 5)
-	FM_DTSEC_INFO_INITIALIZER(1, 5),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 6)
-	FM_DTSEC_INFO_INITIALIZER(1, 6),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 7)
-	FM_DTSEC_INFO_INITIALIZER(1, 9),
-#endif
-#if (CFG_SYS_NUM_FM1_DTSEC >= 8)
-	FM_DTSEC_INFO_INITIALIZER(1, 10),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 1)
-	FM_DTSEC_INFO_INITIALIZER(2, 1),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 2)
-	FM_DTSEC_INFO_INITIALIZER(2, 2),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 3)
-	FM_DTSEC_INFO_INITIALIZER(2, 3),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 4)
-	FM_DTSEC_INFO_INITIALIZER(2, 4),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 5)
-	FM_DTSEC_INFO_INITIALIZER(2, 5),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 6)
-	FM_DTSEC_INFO_INITIALIZER(2, 6),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 7)
-	FM_DTSEC_INFO_INITIALIZER(2, 9),
-#endif
-#if (CFG_SYS_NUM_FM2_DTSEC >= 8)
-	FM_DTSEC_INFO_INITIALIZER(2, 10),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 1)
-	FM_TGEC_INFO_INITIALIZER(1, 1),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 2)
-	FM_TGEC_INFO_INITIALIZER(1, 2),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 3)
-	FM_TGEC_INFO_INITIALIZER2(1, 3),
-#endif
-#if (CFG_SYS_NUM_FM1_10GEC >= 4)
-	FM_TGEC_INFO_INITIALIZER2(1, 4),
-#endif
-#if (CFG_SYS_NUM_FM2_10GEC >= 1)
-	FM_TGEC_INFO_INITIALIZER(2, 1),
-#endif
-#if (CFG_SYS_NUM_FM2_10GEC >= 2)
-	FM_TGEC_INFO_INITIALIZER(2, 2),
-#endif
-};
-
-int fm_standard_init(struct bd_info *bis)
-{
-	int i;
-	struct ccsr_fman *reg;
-
-	reg = (void *)CFG_SYS_FSL_FM1_ADDR;
-	if (fm_init_common(0, reg))
-		return 0;
-
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		if ((fm_info[i].enabled) && (fm_info[i].index == 1))
-			fm_eth_initialize(reg, &fm_info[i]);
-	}
-
-#if (CFG_SYS_NUM_FMAN == 2)
-	reg = (void *)CFG_SYS_FSL_FM2_ADDR;
-	if (fm_init_common(1, reg))
-		return 0;
-
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		if ((fm_info[i].enabled) && (fm_info[i].index == 2))
-			fm_eth_initialize(reg, &fm_info[i]);
-	}
-#endif
-
-	return 1;
-}
-
-/* simple linear search to map from port to array index */
-static int fm_port_to_index(enum fm_port port)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		if (fm_info[i].port == port)
-			return i;
-	}
-
-	return -1;
-}
-
-/*
- * Determine if an interface is actually active based on HW config
- * we expect fman_port_enet_if() to report PHY_INTERFACE_MODE_NA if
- * the interface is not active based on HW cfg of the SoC
- */
-void fman_enet_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		phy_interface_t enet_if;
-
-		enet_if = fman_port_enet_if(fm_info[i].port);
-		if (enet_if != PHY_INTERFACE_MODE_NA) {
-			fm_info[i].enabled = 1;
-			fm_info[i].enet_if = enet_if;
-		} else {
-			fm_info[i].enabled = 0;
-		}
-	}
-
-	return;
-}
-
-void fm_disable_port(enum fm_port port)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return;
-
-	fm_info[i].enabled = 0;
-#ifndef CONFIG_SYS_FMAN_V3
-	fman_disable_port(port);
-#endif
-}
-
-void fm_enable_port(enum fm_port port)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return;
-
-	fm_info[i].enabled = 1;
-	fman_enable_port(port);
-}
-
-void fm_info_set_mdio(enum fm_port port, struct mii_dev *bus)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return;
-
-	fm_info[i].bus = bus;
-}
-
-void fm_info_set_phy_address(enum fm_port port, int address)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return;
-
-	fm_info[i].phy_addr = address;
-}
-
-/*
- * Returns the PHY address for a given Fman port
- *
- * The port must be set via a prior call to fm_info_set_phy_address().
- * A negative error code is returned if the port is invalid.
- */
-int fm_info_get_phy_address(enum fm_port port)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return -1;
-
-	return fm_info[i].phy_addr;
-}
-
-/*
- * Returns the type of the data interface between the given MAC and its PHY.
- * This is typically determined by the RCW.
- */
-phy_interface_t fm_info_get_enet_if(enum fm_port port)
-{
-	int i = fm_port_to_index(port);
-
-	if (i == -1)
-		return PHY_INTERFACE_MODE_NA;
-
-	if (fm_info[i].enabled)
-		return fm_info[i].enet_if;
-
-	return PHY_INTERFACE_MODE_NA;
-}
-
-static void
-__def_board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
-				enum fm_port port, int offset)
-{
-	return;
-}
-
-void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
-				enum fm_port port, int offset)
-	 __attribute__((weak, alias("__def_board_ft_fman_fixup_port")));
-
-int ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
-{
-	int off;
-	uint32_t ph;
-	phys_addr_t paddr = CFG_SYS_CCSRBAR_PHYS + info->compat_offset;
-#ifndef CONFIG_SYS_FMAN_V3
-	u64 dtsec1_addr = (u64)CFG_SYS_CCSRBAR_PHYS +
-				CFG_SYS_FSL_FM1_DTSEC1_OFFSET;
-#endif
-
-	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
-	if (off == -FDT_ERR_NOTFOUND)
-		return -EINVAL;
-
-	if (info->enabled) {
-		fdt_fixup_phy_connection(blob, off, info->enet_if);
-		board_ft_fman_fixup_port(blob, prop, paddr, info->port, off);
-		return 0;
-	}
-
-#ifdef CONFIG_SYS_FMAN_V3
-#ifndef CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
-	/*
-	 * On T2/T4 SoCs, physically FM1_DTSEC9 and FM1_10GEC1 use the same
-	 * dual-role MAC, when FM1_10GEC1 is enabled and  FM1_DTSEC9
-	 * is disabled, ensure that the dual-role MAC is not disabled,
-	 * ditto for other dual-role MACs.
-	 */
-	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
-	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) ||
-	    ((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
-	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
-	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))  ||
-	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) ||
-	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
-	    ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC2)))
-#if (CFG_SYS_NUM_FMAN == 2)
-										||
-	    ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1)))	||
-	    ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2)))	||
-	    ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9)))	||
-	    ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
-#endif
-#else
-	/* FM1_DTSECx and FM1_10GECx use the same dual-role MAC */
-	if (((info->port == FM1_DTSEC1) && (PORT_IS_ENABLED(FM1_10GEC1)))  ||
-	    ((info->port == FM1_DTSEC2) && (PORT_IS_ENABLED(FM1_10GEC2)))  ||
-	    ((info->port == FM1_DTSEC3) && (PORT_IS_ENABLED(FM1_10GEC3)))  ||
-	    ((info->port == FM1_DTSEC4) && (PORT_IS_ENABLED(FM1_10GEC4)))  ||
-	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC1)))  ||
-	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC2)))  ||
-	    ((info->port == FM1_10GEC3) && (PORT_IS_ENABLED(FM1_DTSEC3)))  ||
-	    ((info->port == FM1_10GEC4) && (PORT_IS_ENABLED(FM1_DTSEC4)))
-#endif
-	)
-		return 0;
-#endif
-	/* board code might have caused offset to change */
-	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
-
-#ifndef CONFIG_SYS_FMAN_V3
-	/* Don't disable FM1-DTSEC1 MAC as its used for MDIO */
-	if (paddr != dtsec1_addr)
-#endif
-		fdt_status_disabled(blob, off); /* disable the MAC node */
-
-	/* disable the fsl,dpa-ethernet node that points to the MAC */
-	ph = fdt_get_phandle(blob, off);
-	do_fixup_by_prop(blob, "fsl,fman-mac", &ph, sizeof(ph),
-		"status", "disabled", strlen("disabled") + 1, 1);
-
-	return 0;
-}
-
-void fdt_fixup_fman_ethernet(void *blob)
-{
-	int i;
-
-#ifdef CONFIG_SYS_FMAN_V3
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++)
-		ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
-#else
-	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
-		/* Try the new compatible first.
-		 * If the node is missing, try the old.
-		 */
-		if (fm_info[i].type == FM_ETH_1G_E) {
-			if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-dtsec"))
-				ft_fixup_port(blob, &fm_info[i],
-					      "fsl,fman-1g-mac");
-		} else {
-			if (ft_fixup_port(blob, &fm_info[i], "fsl,fman-xgec") &&
-			    ft_fixup_port(blob, &fm_info[i], "fsl,fman-tgec"))
-				ft_fixup_port(blob, &fm_info[i],
-					      "fsl,fman-10g-mac");
-		}
-	}
-#endif
-}
-
-/*QSGMII Riser Card can work in SGMII mode, but the PHY address is different.
- *This function scans which Riser Card being used(QSGMII or SGMII Riser Card),
- *then set the correct PHY address
- */
-void set_sgmii_phy(struct mii_dev *bus, enum fm_port base_port,
-		unsigned int port_num, int phy_base_addr)
-{
-	unsigned int regnum = 0;
-	int qsgmii;
-	int i;
-	int phy_real_addr;
-
-	qsgmii = is_qsgmii_riser_card(bus, phy_base_addr, port_num, regnum);
-
-	if (!qsgmii)
-		return;
-
-	for (i = base_port; i < base_port + port_num; i++) {
-		if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_SGMII) {
-			phy_real_addr = phy_base_addr + i - base_port;
-			fm_info_set_phy_address(i, phy_real_addr);
-		}
-	}
-}
-
-/*to check whether qsgmii riser card is used*/
-int is_qsgmii_riser_card(struct mii_dev *bus, int phy_base_addr,
-		unsigned int port_num, unsigned regnum)
-{
-	int i;
-	int val;
-
-	if (!bus)
-		return 0;
-
-	for (i = phy_base_addr; i < phy_base_addr + port_num; i++) {
-		val = bus->read(bus, i, MDIO_DEVAD_NONE, regnum);
-		if (val != MIIM_TIMEOUT)
-			return 1;
-	}
-
-	return 0;
-}
-#endif /* CONFIG_DM_ETH */