Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 171 deletions

diff --git a/common/cmd_zfs.c b/common/cmd_zfs.c
deleted file mode 100644
index 0aed29e9b2..0000000000
--- a/common/cmd_zfs.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- *
- * ZFS filesystem porting to Uboot by
- * Jorgen Lundman <lundman at lundman.net>
- *
- * zfsfs support
- * made from existing GRUB Sources by Sun, GNU and others.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <part.h>
-#include <config.h>
-#include <command.h>
-#include <image.h>
-#include <linux/ctype.h>
-#include <asm/byteorder.h>
-#include <zfs_common.h>
-#include <linux/stat.h>
-#include <malloc.h>
-
-#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
-#include <usb.h>
-#endif
-
-#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
-#error DOS or EFI partition support must be selected
-#endif
-
-#define DOS_PART_MAGIC_OFFSET	0x1fe
-#define DOS_FS_TYPE_OFFSET	0x36
-#define DOS_FS32_TYPE_OFFSET	0x52
-
-static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char *filename = NULL;
-	int dev;
-	int part;
-	ulong addr = 0;
-	disk_partition_t info;
-	block_dev_desc_t *dev_desc;
-	char buf[12];
-	unsigned long count;
-	const char *addr_str;
-	struct zfs_file zfile;
-	struct device_s vdev;
-
-	if (argc < 3)
-		return CMD_RET_USAGE;
-
-	count = 0;
-	addr = simple_strtoul(argv[3], NULL, 16);
-	filename = getenv("bootfile");
-	switch (argc) {
-	case 3:
-		addr_str = getenv("loadaddr");
-		if (addr_str != NULL)
-			addr = simple_strtoul(addr_str, NULL, 16);
-		else
-			addr = CONFIG_SYS_LOAD_ADDR;
-
-		break;
-	case 4:
-		break;
-	case 5:
-		filename = argv[4];
-		break;
-	case 6:
-		filename = argv[4];
-		count = simple_strtoul(argv[5], NULL, 16);
-		break;
-
-	default:
-		return cmd_usage(cmdtp);
-	}
-
-	if (!filename) {
-		puts("** No boot file defined **\n");
-		return 1;
-	}
-
-	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	dev = dev_desc->dev;
-	printf("Loading file \"%s\" from %s device %d%c%c\n",
-		filename, argv[1], dev,
-		part ? ':' : ' ', part ? part + '0' : ' ');
-
-	zfs_set_blk_dev(dev_desc, &info);
-	vdev.part_length = info.size;
-
-	memset(&zfile, 0, sizeof(zfile));
-	zfile.device = &vdev;
-	if (zfs_open(&zfile, filename)) {
-		printf("** File not found %s **\n", filename);
-		return 1;
-	}
-
-	if ((count < zfile.size) && (count != 0))
-		zfile.size = (uint64_t)count;
-
-	if (zfs_read(&zfile, (char *)addr, zfile.size) != zfile.size) {
-		printf("** Unable to read \"%s\" from %s %d:%d **\n",
-			   filename, argv[1], dev, part);
-		zfs_close(&zfile);
-		return 1;
-	}
-
-	zfs_close(&zfile);
-
-	/* Loading ok, update default load address */
-	load_addr = addr;
-
-	printf("%llu bytes read\n", zfile.size);
-	setenv_hex("filesize", zfile.size);
-
-	return 0;
-}
-
-
-int zfs_print(const char *entry, const struct zfs_dirhook_info *data)
-{
-	printf("%s %s\n",
-		   data->dir ? "<DIR> " : "		 ",
-		   entry);
-	return 0; /* 0 continue, 1 stop */
-}
-
-
-
-static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	const char *filename = "/";
-	int part;
-	block_dev_desc_t *dev_desc;
-	disk_partition_t info;
-	struct device_s vdev;
-
-	if (argc < 2)
-		return cmd_usage(cmdtp);
-
-	if (argc == 4)
-		filename = argv[3];
-
-	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	zfs_set_blk_dev(dev_desc, &info);
-	vdev.part_length = info.size;
-
-	zfs_ls(&vdev, filename,
-		   zfs_print);
-
-	return 0;
-}
-
-
-U_BOOT_CMD(zfsls, 4, 1, do_zfs_ls,
-		   "list files in a directory (default /)",
-		   "<interface> <dev[:part]> [directory]\n"
-		   "	  - list files from 'dev' on 'interface' in a '/DATASET/@/$dir/'");
-
-U_BOOT_CMD(zfsload, 6, 0, do_zfs_load,
-		   "load binary file from a ZFS filesystem",
-		   "<interface> <dev[:part]> [addr] [filename] [bytes]\n"
-		   "	  - load binary file '/DATASET/@/$dir/$file' from 'dev' on 'interface'\n"
-		   "		 to address 'addr' from ZFS filesystem");