Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 470 deletions

diff --git a/common/cmd_mii.c b/common/cmd_mii.c
deleted file mode 100644
index 7ef7532a50..0000000000
--- a/common/cmd_mii.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * (C) Copyright 2001
- * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * MII Utilities
- */
-
-#include <common.h>
-#include <command.h>
-#include <miiphy.h>
-
-typedef struct _MII_reg_desc_t {
-	ushort regno;
-	char * name;
-} MII_reg_desc_t;
-
-static const MII_reg_desc_t reg_0_5_desc_tbl[] = {
-	{ MII_BMCR,      "PHY control register" },
-	{ MII_BMSR,      "PHY status register" },
-	{ MII_PHYSID1,   "PHY ID 1 register" },
-	{ MII_PHYSID2,   "PHY ID 2 register" },
-	{ MII_ADVERTISE, "Autonegotiation advertisement register" },
-	{ MII_LPA,       "Autonegotiation partner abilities register" },
-};
-
-typedef struct _MII_field_desc_t {
-	ushort hi;
-	ushort lo;
-	ushort mask;
-	char * name;
-} MII_field_desc_t;
-
-static const MII_field_desc_t reg_0_desc_tbl[] = {
-	{ 15, 15, 0x01, "reset"                        },
-	{ 14, 14, 0x01, "loopback"                     },
-	{ 13,  6, 0x81, "speed selection"              }, /* special */
-	{ 12, 12, 0x01, "A/N enable"                   },
-	{ 11, 11, 0x01, "power-down"                   },
-	{ 10, 10, 0x01, "isolate"                      },
-	{  9,  9, 0x01, "restart A/N"                  },
-	{  8,  8, 0x01, "duplex"                       }, /* special */
-	{  7,  7, 0x01, "collision test enable"        },
-	{  5,  0, 0x3f, "(reserved)"                   }
-};
-
-static const MII_field_desc_t reg_1_desc_tbl[] = {
-	{ 15, 15, 0x01, "100BASE-T4 able"              },
-	{ 14, 14, 0x01, "100BASE-X  full duplex able"  },
-	{ 13, 13, 0x01, "100BASE-X  half duplex able"  },
-	{ 12, 12, 0x01, "10 Mbps    full duplex able"  },
-	{ 11, 11, 0x01, "10 Mbps    half duplex able"  },
-	{ 10, 10, 0x01, "100BASE-T2 full duplex able"  },
-	{  9,  9, 0x01, "100BASE-T2 half duplex able"  },
-	{  8,  8, 0x01, "extended status"              },
-	{  7,  7, 0x01, "(reserved)"                   },
-	{  6,  6, 0x01, "MF preamble suppression"      },
-	{  5,  5, 0x01, "A/N complete"                 },
-	{  4,  4, 0x01, "remote fault"                 },
-	{  3,  3, 0x01, "A/N able"                     },
-	{  2,  2, 0x01, "link status"                  },
-	{  1,  1, 0x01, "jabber detect"                },
-	{  0,  0, 0x01, "extended capabilities"        },
-};
-
-static const MII_field_desc_t reg_2_desc_tbl[] = {
-	{ 15,  0, 0xffff, "OUI portion"                },
-};
-
-static const MII_field_desc_t reg_3_desc_tbl[] = {
-	{ 15, 10, 0x3f, "OUI portion"                },
-	{  9,  4, 0x3f, "manufacturer part number"   },
-	{  3,  0, 0x0f, "manufacturer rev. number"   },
-};
-
-static const MII_field_desc_t reg_4_desc_tbl[] = {
-	{ 15, 15, 0x01, "next page able"               },
-	{ 14, 14, 0x01, "(reserved)"                   },
-	{ 13, 13, 0x01, "remote fault"                 },
-	{ 12, 12, 0x01, "(reserved)"                   },
-	{ 11, 11, 0x01, "asymmetric pause"             },
-	{ 10, 10, 0x01, "pause enable"                 },
-	{  9,  9, 0x01, "100BASE-T4 able"              },
-	{  8,  8, 0x01, "100BASE-TX full duplex able"  },
-	{  7,  7, 0x01, "100BASE-TX able"              },
-	{  6,  6, 0x01, "10BASE-T   full duplex able"  },
-	{  5,  5, 0x01, "10BASE-T   able"              },
-	{  4,  0, 0x1f, "xxx to do"                    },
-};
-
-static const MII_field_desc_t reg_5_desc_tbl[] = {
-	{ 15, 15, 0x01, "next page able"               },
-	{ 14, 14, 0x01, "acknowledge"                  },
-	{ 13, 13, 0x01, "remote fault"                 },
-	{ 12, 12, 0x01, "(reserved)"                   },
-	{ 11, 11, 0x01, "asymmetric pause able"        },
-	{ 10, 10, 0x01, "pause able"                   },
-	{  9,  9, 0x01, "100BASE-T4 able"              },
-	{  8,  8, 0x01, "100BASE-X full duplex able"   },
-	{  7,  7, 0x01, "100BASE-TX able"              },
-	{  6,  6, 0x01, "10BASE-T full duplex able"    },
-	{  5,  5, 0x01, "10BASE-T able"                },
-	{  4,  0, 0x1f, "xxx to do"                    },
-};
-typedef struct _MII_field_desc_and_len_t {
-	const MII_field_desc_t *pdesc;
-	ushort len;
-} MII_field_desc_and_len_t;
-
-static const MII_field_desc_and_len_t desc_and_len_tbl[] = {
-	{ reg_0_desc_tbl, ARRAY_SIZE(reg_0_desc_tbl)   },
-	{ reg_1_desc_tbl, ARRAY_SIZE(reg_1_desc_tbl)   },
-	{ reg_2_desc_tbl, ARRAY_SIZE(reg_2_desc_tbl)   },
-	{ reg_3_desc_tbl, ARRAY_SIZE(reg_3_desc_tbl)   },
-	{ reg_4_desc_tbl, ARRAY_SIZE(reg_4_desc_tbl)   },
-	{ reg_5_desc_tbl, ARRAY_SIZE(reg_5_desc_tbl)   },
-};
-
-static void dump_reg(
-	ushort             regval,
-	const MII_reg_desc_t *prd,
-	const MII_field_desc_and_len_t *pdl);
-
-static int special_field(
-	ushort regno,
-	const MII_field_desc_t *pdesc,
-	ushort regval);
-
-static void MII_dump_0_to_5(
-	ushort regvals[6],
-	uchar reglo,
-	uchar reghi)
-{
-	ulong i;
-
-	for (i = 0; i < 6; i++) {
-		if ((reglo <= i) && (i <= reghi))
-			dump_reg(regvals[i], &reg_0_5_desc_tbl[i],
-				&desc_and_len_tbl[i]);
-	}
-}
-
-static void dump_reg(
-	ushort             regval,
-	const MII_reg_desc_t *prd,
-	const MII_field_desc_and_len_t *pdl)
-{
-	ulong i;
-	ushort mask_in_place;
-	const MII_field_desc_t *pdesc;
-
-	printf("%u.     (%04hx)                 -- %s --\n",
-		prd->regno, regval, prd->name);
-
-	for (i = 0; i < pdl->len; i++) {
-		pdesc = &pdl->pdesc[i];
-
-		mask_in_place = pdesc->mask << pdesc->lo;
-
-		printf("  (%04hx:%04x) %u.",
-		       mask_in_place,
-		       regval & mask_in_place,
-		       prd->regno);
-
-		if (special_field(prd->regno, pdesc, regval)) {
-		}
-		else {
-			if (pdesc->hi == pdesc->lo)
-				printf("%2u   ", pdesc->lo);
-			else
-				printf("%2u-%2u", pdesc->hi, pdesc->lo);
-			printf(" = %5u    %s",
-				(regval & mask_in_place) >> pdesc->lo,
-				pdesc->name);
-		}
-		printf("\n");
-
-	}
-	printf("\n");
-}
-
-/* Special fields:
-** 0.6,13
-** 0.8
-** 2.15-0
-** 3.15-0
-** 4.4-0
-** 5.4-0
-*/
-
-static int special_field(
-	ushort regno,
-	const MII_field_desc_t *pdesc,
-	ushort regval)
-{
-	if ((regno == MII_BMCR) && (pdesc->lo == 6)) {
-		ushort speed_bits = regval & (BMCR_SPEED1000 | BMCR_SPEED100);
-		printf("%2u,%2u =   b%u%u    speed selection = %s Mbps",
-			6, 13,
-			(regval >>  6) & 1,
-			(regval >> 13) & 1,
-			speed_bits == BMCR_SPEED1000 ? "1000" :
-			speed_bits == BMCR_SPEED100  ? "100" :
-			"10");
-		return 1;
-	}
-
-	else if ((regno == MII_BMCR) && (pdesc->lo == 8)) {
-		printf("%2u    = %5u    duplex = %s",
-			pdesc->lo,
-			(regval >>  pdesc->lo) & 1,
-			((regval >> pdesc->lo) & 1) ? "full" : "half");
-		return 1;
-	}
-
-	else if ((regno == MII_ADVERTISE) && (pdesc->lo == 0)) {
-		ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
-		printf("%2u-%2u = %5u    selector = %s",
-			pdesc->hi, pdesc->lo, sel_bits,
-			sel_bits == PHY_ANLPAR_PSB_802_3 ?
-				"IEEE 802.3" :
-			sel_bits == PHY_ANLPAR_PSB_802_9 ?
-				"IEEE 802.9 ISLAN-16T" :
-			"???");
-		return 1;
-	}
-
-	else if ((regno == MII_LPA) && (pdesc->lo == 0)) {
-		ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
-		printf("%2u-%2u =     %u    selector = %s",
-			pdesc->hi, pdesc->lo, sel_bits,
-			sel_bits == PHY_ANLPAR_PSB_802_3 ?
-				"IEEE 802.3" :
-			sel_bits == PHY_ANLPAR_PSB_802_9 ?
-				"IEEE 802.9 ISLAN-16T" :
-			"???");
-		return 1;
-	}
-
-	return 0;
-}
-
-static char last_op[2];
-static uint last_data;
-static uint last_addr_lo;
-static uint last_addr_hi;
-static uint last_reg_lo;
-static uint last_reg_hi;
-static uint last_mask;
-
-static void extract_range(
-	char * input,
-	unsigned char * plo,
-	unsigned char * phi)
-{
-	char * end;
-	*plo = simple_strtoul(input, &end, 16);
-	if (*end == '-') {
-		end++;
-		*phi = simple_strtoul(end, NULL, 16);
-	}
-	else {
-		*phi = *plo;
-	}
-}
-
-/* ---------------------------------------------------------------- */
-static int do_mii(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char		op[2];
-	unsigned char	addrlo, addrhi, reglo, reghi;
-	unsigned char	addr, reg;
-	unsigned short	data, mask;
-	int		rcode = 0;
-	const char	*devname;
-
-	if (argc < 2)
-		return CMD_RET_USAGE;
-
-#if defined(CONFIG_MII_INIT)
-	mii_init ();
-#endif
-
-	/*
-	 * We use the last specified parameters, unless new ones are
-	 * entered.
-	 */
-	op[0] = last_op[0];
-	op[1] = last_op[1];
-	addrlo = last_addr_lo;
-	addrhi = last_addr_hi;
-	reglo  = last_reg_lo;
-	reghi  = last_reg_hi;
-	data   = last_data;
-	mask   = last_mask;
-
-	if ((flag & CMD_FLAG_REPEAT) == 0) {
-		op[0] = argv[1][0];
-		if (strlen(argv[1]) > 1)
-			op[1] = argv[1][1];
-		else
-			op[1] = '\0';
-
-		if (argc >= 3)
-			extract_range(argv[2], &addrlo, &addrhi);
-		if (argc >= 4)
-			extract_range(argv[3], &reglo, &reghi);
-		if (argc >= 5)
-			data = simple_strtoul(argv[4], NULL, 16);
-		if (argc >= 6)
-			mask = simple_strtoul(argv[5], NULL, 16);
-	}
-
-	if (addrhi > 31) {
-		printf("Incorrect PHY address. Range should be 0-31\n");
-		return CMD_RET_USAGE;
-	}
-
-	/* use current device */
-	devname = miiphy_get_current_dev();
-
-	/*
-	 * check info/read/write.
-	 */
-	if (op[0] == 'i') {
-		unsigned char j, start, end;
-		unsigned int oui;
-		unsigned char model;
-		unsigned char rev;
-
-		/*
-		 * Look for any and all PHYs.  Valid addresses are 0..31.
-		 */
-		if (argc >= 3) {
-			start = addrlo; end = addrhi;
-		} else {
-			start = 0; end = 31;
-		}
-
-		for (j = start; j <= end; j++) {
-			if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
-				printf("PHY 0x%02X: "
-					"OUI = 0x%04X, "
-					"Model = 0x%02X, "
-					"Rev = 0x%02X, "
-					"%3dbase%s, %s\n",
-					j, oui, model, rev,
-					miiphy_speed (devname, j),
-					miiphy_is_1000base_x (devname, j)
-						? "X" : "T",
-					(miiphy_duplex (devname, j) == FULL)
-						? "FDX" : "HDX");
-			}
-		}
-	} else if (op[0] == 'r') {
-		for (addr = addrlo; addr <= addrhi; addr++) {
-			for (reg = reglo; reg <= reghi; reg++) {
-				data = 0xffff;
-				if (miiphy_read (devname, addr, reg, &data) != 0) {
-					printf(
-					"Error reading from the PHY addr=%02x reg=%02x\n",
-						addr, reg);
-					rcode = 1;
-				} else {
-					if ((addrlo != addrhi) || (reglo != reghi))
-						printf("addr=%02x reg=%02x data=",
-							(uint)addr, (uint)reg);
-					printf("%04X\n", data & 0x0000FFFF);
-				}
-			}
-			if ((addrlo != addrhi) && (reglo != reghi))
-				printf("\n");
-		}
-	} else if (op[0] == 'w') {
-		for (addr = addrlo; addr <= addrhi; addr++) {
-			for (reg = reglo; reg <= reghi; reg++) {
-				if (miiphy_write (devname, addr, reg, data) != 0) {
-					printf("Error writing to the PHY addr=%02x reg=%02x\n",
-						addr, reg);
-					rcode = 1;
-				}
-			}
-		}
-	} else if (op[0] == 'm') {
-		for (addr = addrlo; addr <= addrhi; addr++) {
-			for (reg = reglo; reg <= reghi; reg++) {
-				unsigned short val = 0;
-				if (miiphy_read(devname, addr,
-						reg, &val)) {
-					printf("Error reading from the PHY");
-					printf(" addr=%02x", addr);
-					printf(" reg=%02x\n", reg);
-					rcode = 1;
-				} else {
-					val = (val & ~mask) | (data & mask);
-					if (miiphy_write(devname, addr,
-							 reg, val)) {
-						printf("Error writing to the PHY");
-						printf(" addr=%02x", addr);
-						printf(" reg=%02x\n", reg);
-						rcode = 1;
-					}
-				}
-			}
-		}
-	} else if (strncmp(op, "du", 2) == 0) {
-		ushort regs[6];
-		int ok = 1;
-		if ((reglo > 5) || (reghi > 5)) {
-			printf(
-				"The MII dump command only formats the "
-				"standard MII registers, 0-5.\n");
-			return 1;
-		}
-		for (addr = addrlo; addr <= addrhi; addr++) {
-			for (reg = reglo; reg < reghi + 1; reg++) {
-				if (miiphy_read(devname, addr, reg, &regs[reg]) != 0) {
-					ok = 0;
-					printf(
-					"Error reading from the PHY addr=%02x reg=%02x\n",
-						addr, reg);
-					rcode = 1;
-				}
-			}
-			if (ok)
-				MII_dump_0_to_5(regs, reglo, reghi);
-			printf("\n");
-		}
-	} else if (strncmp(op, "de", 2) == 0) {
-		if (argc == 2)
-			miiphy_listdev ();
-		else
-			miiphy_set_current_dev (argv[2]);
-	} else {
-		return CMD_RET_USAGE;
-	}
-
-	/*
-	 * Save the parameters for repeats.
-	 */
-	last_op[0] = op[0];
-	last_op[1] = op[1];
-	last_addr_lo = addrlo;
-	last_addr_hi = addrhi;
-	last_reg_lo  = reglo;
-	last_reg_hi  = reghi;
-	last_data    = data;
-	last_mask    = mask;
-
-	return rcode;
-}
-
-/***************************************************/
-
-U_BOOT_CMD(
-	mii, 6, 1, do_mii,
-	"MII utility commands",
-	"device                            - list available devices\n"
-	"mii device <devname>                  - set current device\n"
-	"mii info   <addr>                     - display MII PHY info\n"
-	"mii read   <addr> <reg>               - read  MII PHY <addr> register <reg>\n"
-	"mii write  <addr> <reg> <data>        - write MII PHY <addr> register <reg>\n"
-	"mii modify <addr> <reg> <data> <mask> - modify MII PHY <addr> register <reg>\n"
-	"                                        updating bits identified in <mask>\n"
-	"mii dump   <addr> <reg>               - pretty-print <addr> <reg> (0-5 only)\n"
-	"Addr and/or reg may be ranges, e.g. 2-7."
-);