Move all command code into its own directory

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Przemyslaw Marczak <p.marczak@samsung.com>

1 files changed, 0 insertions, 207 deletions

diff --git a/common/cmd_cramfs.c b/common/cmd_cramfs.c
deleted file mode 100644
index 1d31326bd6..0000000000
--- a/common/cmd_cramfs.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * based on: cmd_jffs2.c
- *
- * 	Add support for a CRAMFS located in RAM
- */
-
-
-/*
- * CRAMFS support
- */
-#include <common.h>
-#include <command.h>
-#include <malloc.h>
-#include <linux/list.h>
-#include <linux/ctype.h>
-#include <jffs2/jffs2.h>
-#include <jffs2/load_kernel.h>
-#include <cramfs/cramfs_fs.h>
-
-/* enable/disable debugging messages */
-#define	DEBUG_CRAMFS
-#undef	DEBUG_CRAMFS
-
-#ifdef  DEBUG_CRAMFS
-# define DEBUGF(fmt, args...)	printf(fmt ,##args)
-#else
-# define DEBUGF(fmt, args...)
-#endif
-
-#ifdef CONFIG_CRAMFS_CMDLINE
-#include <flash.h>
-
-#ifdef CONFIG_SYS_NO_FLASH
-# define OFFSET_ADJUSTMENT	0
-#else
-# define OFFSET_ADJUSTMENT	(flash_info[id.num].start[0])
-#endif
-
-#ifndef CONFIG_CMD_JFFS2
-#include <linux/stat.h>
-char *mkmodestr(unsigned long mode, char *str)
-{
-	static const char *l = "xwr";
-	int mask = 1, i;
-	char c;
-
-	switch (mode & S_IFMT) {
-		case S_IFDIR:    str[0] = 'd'; break;
-		case S_IFBLK:    str[0] = 'b'; break;
-		case S_IFCHR:    str[0] = 'c'; break;
-		case S_IFIFO:    str[0] = 'f'; break;
-		case S_IFLNK:    str[0] = 'l'; break;
-		case S_IFSOCK:   str[0] = 's'; break;
-		case S_IFREG:    str[0] = '-'; break;
-		default:         str[0] = '?';
-	}
-
-	for(i = 0; i < 9; i++) {
-		c = l[i%3];
-		str[9-i] = (mode & mask)?c:'-';
-		mask = mask<<1;
-	}
-
-	if(mode & S_ISUID) str[3] = (mode & S_IXUSR)?'s':'S';
-	if(mode & S_ISGID) str[6] = (mode & S_IXGRP)?'s':'S';
-	if(mode & S_ISVTX) str[9] = (mode & S_IXOTH)?'t':'T';
-	str[10] = '\0';
-	return str;
-}
-#endif /* CONFIG_CMD_JFFS2 */
-
-extern int cramfs_check (struct part_info *info);
-extern int cramfs_load (char *loadoffset, struct part_info *info, char *filename);
-extern int cramfs_ls (struct part_info *info, char *filename);
-extern int cramfs_info (struct part_info *info);
-
-/***************************************************/
-/* U-boot commands				   */
-/***************************************************/
-
-/**
- * Routine implementing fsload u-boot command. This routine tries to load
- * a requested file from cramfs filesystem at location 'cramfsaddr'.
- * cramfsaddr is an evironment variable.
- *
- * @param cmdtp command internal data
- * @param flag command flag
- * @param argc number of arguments supplied to the command
- * @param argv arguments list
- * @return 0 on success, 1 otherwise
- */
-int do_cramfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char *filename;
-	int size;
-	ulong offset = load_addr;
-
-	struct part_info part;
-	struct mtd_device dev;
-	struct mtdids id;
-
-	ulong addr;
-	addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);
-
-	/* hack! */
-	/* cramfs_* only supports NOR flash chips */
-	/* fake the device type */
-	id.type = MTD_DEV_TYPE_NOR;
-	id.num = 0;
-	dev.id = &id;
-	part.dev = &dev;
-	/* fake the address offset */
-	part.offset = addr - OFFSET_ADJUSTMENT;
-
-	/* pre-set Boot file name */
-	if ((filename = getenv("bootfile")) == NULL) {
-		filename = "uImage";
-	}
-
-	if (argc == 2) {
-		filename = argv[1];
-	}
-	if (argc == 3) {
-		offset = simple_strtoul(argv[1], NULL, 0);
-		load_addr = offset;
-		filename = argv[2];
-	}
-
-	size = 0;
-	if (cramfs_check(&part))
-		size = cramfs_load ((char *) offset, &part, filename);
-
-	if (size > 0) {
-		printf("### CRAMFS load complete: %d bytes loaded to 0x%lx\n",
-			size, offset);
-		setenv_hex("filesize", size);
-	} else {
-		printf("### CRAMFS LOAD ERROR<%x> for %s!\n", size, filename);
-	}
-
-	return !(size > 0);
-}
-
-/**
- * Routine implementing u-boot ls command which lists content of a given
- * directory at location 'cramfsaddr'.
- * cramfsaddr is an evironment variable.
- *
- * @param cmdtp command internal data
- * @param flag command flag
- * @param argc number of arguments supplied to the command
- * @param argv arguments list
- * @return 0 on success, 1 otherwise
- */
-int do_cramfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char *filename = "/";
-	int ret;
-	struct part_info part;
-	struct mtd_device dev;
-	struct mtdids id;
-
-	ulong addr;
-	addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);
-
-	/* hack! */
-	/* cramfs_* only supports NOR flash chips */
-	/* fake the device type */
-	id.type = MTD_DEV_TYPE_NOR;
-	id.num = 0;
-	dev.id = &id;
-	part.dev = &dev;
-	/* fake the address offset */
-	part.offset = addr - OFFSET_ADJUSTMENT;
-
-	if (argc == 2)
-		filename = argv[1];
-
-	ret = 0;
-	if (cramfs_check(&part))
-		ret = cramfs_ls (&part, filename);
-
-	return ret ? 0 : 1;
-}
-
-/* command line only */
-
-/***************************************************/
-U_BOOT_CMD(
-	cramfsload,	3,	0,	do_cramfs_load,
-	"load binary file from a filesystem image",
-	"[ off ] [ filename ]\n"
-	"    - load binary file from address 'cramfsaddr'\n"
-	"      with offset 'off'\n"
-);
-U_BOOT_CMD(
-	cramfsls,	2,	1,	do_cramfs_ls,
-	"list files in a directory (default /)",
-	"[ directory ]\n"
-	"    - list files in a directory.\n"
-);
-
-#endif /* #ifdef CONFIG_CRAMFS_CMDLINE */
-
-/***************************************************/