Merge tag 'u-boot-stm32-20200707' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm

- arch and board update for stm32mp15:
  - use OPP information in device tree for 800MHz/650MHz support
  - ram: inprovments of test command
  - solve boot on closed chip when access to DBGMCU_IDC is protected
  - stm32prog command: Add "device anme" during USB enumeration
  - update configs: activate WATCHDOG and 'env erase' command,
    increase teed partition, support SD card after NOR boot by default and
    use env info in env_check
  - some sboard cleanups: gpio hog in dh board, specific driver for
    type-c stusb1600 controller code in a driver move part of code in spl.c
    and in common directory
- fix STM32 compatible for dwc_eth_qos driver
- support of new pinctrl ops get_dir_flags/set_dir_flags in stm32 and stmfx
  drivers
- vrefbuf: fix a possible overshoot when re-enabling

1 files changed, 216 insertions, 0 deletions

diff --git a/board/st/common/stpmic1.c b/board/st/common/stpmic1.c
new file mode 100644
index 0000000000..3aa379e8a5
--- /dev/null
+++ b/board/st/common/stpmic1.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2020, STMicroelectronics - All Rights Reserved
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/arch/ddr.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <power/pmic.h>
+#include <power/stpmic1.h>
+
+int board_ddr_power_init(enum ddr_type ddr_type)
+{
+	struct udevice *dev;
+	bool buck3_at_1800000v = false;
+	int ret;
+	u32 buck2;
+
+	ret = uclass_get_device_by_driver(UCLASS_PMIC,
+					  DM_GET_DRIVER(pmic_stpmic1), &dev);
+	if (ret)
+		/* No PMIC on board */
+		return 0;
+
+	switch (ddr_type) {
+	case STM32MP_DDR3:
+		/* VTT = Set LDO3 to sync mode */
+		ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
+		if (ret < 0)
+			return ret;
+
+		ret &= ~STPMIC1_LDO3_MODE;
+		ret &= ~STPMIC1_LDO12356_VOUT_MASK;
+		ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL);
+
+		ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+				     ret);
+		if (ret < 0)
+			return ret;
+
+		/* VDD_DDR = Set BUCK2 to 1.35V */
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+				      STPMIC1_BUCK_VOUT_MASK,
+				      STPMIC1_BUCK2_1350000V);
+		if (ret < 0)
+			return ret;
+
+		/* Enable VDD_DDR = BUCK2 */
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+				      STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		/* Enable VREF */
+		ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
+				      STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		/* Enable VTT = LDO3 */
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+				      STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		break;
+
+	case STM32MP_LPDDR2_16:
+	case STM32MP_LPDDR2_32:
+	case STM32MP_LPDDR3_16:
+	case STM32MP_LPDDR3_32:
+		/*
+		 * configure VDD_DDR1 = LDO3
+		 * Set LDO3 to 1.8V
+		 * + bypass mode if BUCK3 = 1.8V
+		 * + normal mode if BUCK3 != 1.8V
+		 */
+		ret = pmic_reg_read(dev,
+				    STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK3));
+		if (ret < 0)
+			return ret;
+
+		if ((ret & STPMIC1_BUCK3_1800000V) == STPMIC1_BUCK3_1800000V)
+			buck3_at_1800000v = true;
+
+		ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3));
+		if (ret < 0)
+			return ret;
+
+		ret &= ~STPMIC1_LDO3_MODE;
+		ret &= ~STPMIC1_LDO12356_VOUT_MASK;
+		ret |= STPMIC1_LDO3_1800000;
+		if (buck3_at_1800000v)
+			ret |= STPMIC1_LDO3_MODE;
+
+		ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+				     ret);
+		if (ret < 0)
+			return ret;
+
+		/* VDD_DDR2 : Set BUCK2 to 1.2V (16bits) or 1.25V (32 bits)*/
+		switch (ddr_type) {
+		case STM32MP_LPDDR2_32:
+		case STM32MP_LPDDR3_32:
+			buck2 = STPMIC1_BUCK2_1250000V;
+			break;
+		default:
+		case STM32MP_LPDDR2_16:
+		case STM32MP_LPDDR3_16:
+			buck2 = STPMIC1_BUCK2_1200000V;
+			break;
+		}
+
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+				      STPMIC1_BUCK_VOUT_MASK,
+				      buck2);
+		if (ret < 0)
+			return ret;
+
+		/* Enable VDD_DDR1 = LDO3 */
+		ret = pmic_clrsetbits(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3),
+				      STPMIC1_LDO_ENA, STPMIC1_LDO_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		/* Enable VDD_DDR2 =BUCK2 */
+		ret = pmic_clrsetbits(dev,
+				      STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2),
+				      STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		/* Enable VREF */
+		ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR,
+				      STPMIC1_VREF_ENA, STPMIC1_VREF_ENA);
+		if (ret < 0)
+			return ret;
+
+		mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS);
+
+		break;
+
+	default:
+		break;
+	};
+
+	return 0;
+}
+
+static int stmpic_buck1_set(struct udevice *dev, u32 voltage_mv)
+{
+	u32 value;
+
+	/* VDDCORE= STMPCI1 BUCK1 ramp=+25mV, 5 => 725mV, 36 => 1500mV */
+	value = ((voltage_mv - 725) / 25) + 5;
+	if (value < 5)
+		value = 5;
+	if (value > 36)
+		value = 36;
+
+	return pmic_clrsetbits(dev,
+			       STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK1),
+			       STPMIC1_BUCK_VOUT_MASK,
+			       STPMIC1_BUCK_VOUT(value));
+}
+
+/* early init of PMIC */
+void stpmic1_init(u32 voltage_mv)
+{
+	struct udevice *dev;
+
+	if (uclass_get_device_by_driver(UCLASS_PMIC,
+					DM_GET_DRIVER(pmic_stpmic1), &dev))
+		return;
+
+	/* update VDDCORE = BUCK1 */
+	if (voltage_mv)
+		stmpic_buck1_set(dev, voltage_mv);
+
+	/* Keep vdd on during the reset cycle */
+	pmic_clrsetbits(dev,
+			STPMIC1_BUCKS_MRST_CR,
+			STPMIC1_MRST_BUCK(STPMIC1_BUCK3),
+			STPMIC1_MRST_BUCK(STPMIC1_BUCK3));
+
+	/* Check if debug is enabled to program PMIC according to the bit */
+	if (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_DEBUG_ON) {
+		printf("Keep debug unit ON\n");
+
+		pmic_clrsetbits(dev, STPMIC1_BUCKS_MRST_CR,
+				STPMIC1_MRST_BUCK_DEBUG,
+				STPMIC1_MRST_BUCK_DEBUG);
+
+		if (STPMIC1_MRST_LDO_DEBUG)
+			pmic_clrsetbits(dev, STPMIC1_LDOS_MRST_CR,
+					STPMIC1_MRST_LDO_DEBUG,
+					STPMIC1_MRST_LDO_DEBUG);
+	}
+}