Merge tag 'u-boot-stm32-20230816' of https://source.denx.de/u-boot/custodians/u-boot-stm

DHSOM: Power cycle Buck3 in reset
DHCOM: Switch DWMAC RMII clock to MCO2
stm32f746: fix display pinmux
stm32mp: psci: Inhibit PDDS because CSTBYDIS is set
stm32mp1: DT alignment with v6.4
stm32mp1: add splashscreen with STMicroelectronics logo
stm32mp1: clk: remove error for disabled clock in stm32mp1_clk_get_parent
serial: stm32: Extend TC timeout

14 files changed, 333 insertions, 62 deletions

diff --git a/arch/arm/dts/stm32f746-disco-u-boot.dtsi b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
index 19b5451db4..522cffb1ac 100644
--- a/arch/arm/dts/stm32f746-disco-u-boot.dtsi
+++ b/arch/arm/dts/stm32f746-disco-u-boot.dtsi
@@ -169,7 +169,7 @@
 	ltdc_pins: ltdc@0 {
 		pins {
 			pinmux = <STM32_PINMUX('E', 4, AF14)>, /* B0 */
-				 <STM32_PINMUX('G',12, AF14)>, /* B4 */
+				 <STM32_PINMUX('G',12, AF9)>,  /* B4 */
 				 <STM32_PINMUX('I', 9, AF14)>, /* VSYNC */
 				 <STM32_PINMUX('I',10, AF14)>, /* HSYNC */
 				 <STM32_PINMUX('I',14, AF14)>, /* CLK */
diff --git a/arch/arm/dts/stm32mp13-pinctrl.dtsi b/arch/arm/dts/stm32mp13-pinctrl.dtsi
index b2dce3a29f..27e0c38267 100644
--- a/arch/arm/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp13-pinctrl.dtsi
@@ -258,4 +258,133 @@
 			bias-disable;
 		};
 	};
+
+	uart4_idle_pins_a: uart4-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */
+		};
+	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart8_idle_pins_a: uart8-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 9, AF8)>; /* UART8_RX */
+			bias-pull-up;
+		};
+	};
+
+	uart8_sleep_pins_a: uart8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */
+				 <STM32_PINMUX('F', 9, ANALOG)>; /* UART8_RX */
+		};
+	};
+
+	usart1_pins_a: usart1-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>, /* USART1_RX */
+				 <STM32_PINMUX('A', 7, AF7)>; /* USART1_CTS_NSS */
+			bias-pull-up;
+		};
+	};
+
+	usart1_idle_pins_a: usart1-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* USART1_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('C', 2, AF7)>; /* USART1_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('B', 0, AF4)>; /* USART1_RX */
+			bias-pull-up;
+		};
+	};
+
+	usart1_sleep_pins_a: usart1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* USART1_RTS */
+				 <STM32_PINMUX('A', 7, ANALOG)>, /* USART1_CTS_NSS */
+				 <STM32_PINMUX('B', 0, ANALOG)>; /* USART1_RX */
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, AF2)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_idle_pins_a: usart2-idle-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 4, AF3)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
 };
diff --git a/arch/arm/dts/stm32mp131.dtsi b/arch/arm/dts/stm32mp131.dtsi
index d94ba25472..d163c267e3 100644
--- a/arch/arm/dts/stm32mp131.dtsi
+++ b/arch/arm/dts/stm32mp131.dtsi
@@ -397,12 +397,42 @@
 			status = "disabled";
 		};
 
+		usart3: serial@4000f000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4000f000 0x400>;
+			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART3_K>;
+			resets = <&rcc USART3_R>;
+			wakeup-source;
+			dmas = <&dmamux1 45 0x400 0x5>,
+			       <&dmamux1 46 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		uart4: serial@40010000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
-			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART4_K>;
 			resets = <&rcc UART4_R>;
+			wakeup-source;
+			dmas = <&dmamux1 63 0x400 0x5>,
+			       <&dmamux1 64 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart5: serial@40011000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40011000 0x400>;
+			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART5_K>;
+			resets = <&rcc UART5_R>;
+			wakeup-source;
+			dmas = <&dmamux1 65 0x400 0x5>,
+			       <&dmamux1 66 0x400 0x1>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -442,6 +472,32 @@
 			status = "disabled";
 		};
 
+		uart7: serial@40018000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40018000 0x400>;
+			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART7_K>;
+			resets = <&rcc UART7_R>;
+			wakeup-source;
+			dmas = <&dmamux1 79 0x400 0x5>,
+			       <&dmamux1 80 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart8: serial@40019000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x40019000 0x400>;
+			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc UART8_K>;
+			resets = <&rcc UART8_R>;
+			wakeup-source;
+			dmas = <&dmamux1 81 0x400 0x5>,
+			       <&dmamux1 82 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		timers1: timer@44000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -524,6 +580,19 @@
 			};
 		};
 
+		usart6: serial@44003000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x44003000 0x400>;
+			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART6_K>;
+			resets = <&rcc USART6_R>;
+			wakeup-source;
+			dmas = <&dmamux1 71 0x400 0x5>,
+			       <&dmamux1 72 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2s1: audio-controller@44004000 {
 			compatible = "st,stm32h7-i2s";
 			reg = <0x44004000 0x400>;
@@ -748,6 +817,32 @@
 			status = "disabled";
 		};
 
+		usart1: serial@4c000000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c000000 0x400>;
+			interrupts-extended = <&exti 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART1_K>;
+			resets = <&rcc USART1_R>;
+			wakeup-source;
+			dmas = <&dmamux1 41 0x400 0x5>,
+			       <&dmamux1 42 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		usart2: serial@4c001000 {
+			compatible = "st,stm32h7-uart";
+			reg = <0x4c001000 0x400>;
+			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&rcc USART2_K>;
+			resets = <&rcc USART2_R>;
+			wakeup-source;
+			dmas = <&dmamux1 43 0x400 0x5>,
+			       <&dmamux1 44 0x400 0x1>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
 		i2s4: audio-controller@4c002000 {
 			compatible = "st,stm32h7-i2s";
 			reg = <0x4c002000 0x400>;
@@ -1001,8 +1096,6 @@
 			reg = <0x50000000 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-
 			clock-names = "hse", "hsi", "csi", "lse", "lsi";
 			clocks = <&scmi_clk CK_SCMI_HSE>,
 				 <&scmi_clk CK_SCMI_HSI>,
diff --git a/arch/arm/dts/stm32mp135f-dk.dts b/arch/arm/dts/stm32mp135f-dk.dts
index c40686cb2b..f0900ca672 100644
--- a/arch/arm/dts/stm32mp135f-dk.dts
+++ b/arch/arm/dts/stm32mp135f-dk.dts
@@ -19,6 +19,13 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &usart1;
+		serial2 = &uart8;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@c0000000 {
@@ -267,8 +274,41 @@
 };
 
 &uart4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep", "idle";
 	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart8_pins_a>;
+	pinctrl-1 = <&uart8_sleep_pins_a>;
+	pinctrl-2 = <&uart8_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
+&usart1 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-1 = <&usart1_sleep_pins_a>;
+	pinctrl-2 = <&usart1_idle_pins_a>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	pinctrl-2 = <&usart2_idle_pins_a>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/stm32mp15-pinctrl.dtsi b/arch/arm/dts/stm32mp15-pinctrl.dtsi
index a9d2bec990..e86d989dd3 100644
--- a/arch/arm/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/dts/stm32mp15-pinctrl.dtsi
@@ -1880,6 +1880,21 @@
 		};
 	};
 
+	spi1_pins_b: spi1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
 	spi2_pins_a: spi2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
@@ -2163,7 +2178,7 @@
 				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
 			bias-disable;
 			drive-push-pull;
-			slew-rate = <3>;
+			slew-rate = <0>;
 		};
 		pins2 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
@@ -2181,7 +2196,7 @@
 			pinmux = <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
 			bias-disable;
 			drive-push-pull;
-			slew-rate = <3>;
+			slew-rate = <0>;
 		};
 		pins3 {
 			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
@@ -2448,19 +2463,4 @@
 			bias-disable;
 		};
 	};
-
-	spi1_pins_b: spi1-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('A', 5, AF5)>, /* SPI1_SCK */
-				 <STM32_PINMUX('B', 5, AF5)>; /* SPI1_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 6, AF5)>; /* SPI1_MISO */
-			bias-disable;
-		};
-	};
 };
diff --git a/arch/arm/dts/stm32mp151.dtsi b/arch/arm/dts/stm32mp151.dtsi
index b3baacbb26..21d11be328 100644
--- a/arch/arm/dts/stm32mp151.dtsi
+++ b/arch/arm/dts/stm32mp151.dtsi
@@ -1148,8 +1148,8 @@
 		usbotg_hs: usb-otg@49000000 {
 			compatible = "st,stm32mp15-hsotg", "snps,dwc2";
 			reg = <0x49000000 0x10000>;
-			clocks = <&rcc USBO_K>;
-			clock-names = "otg";
+			clocks = <&rcc USBO_K>, <&usbphyc>;
+			clock-names = "otg", "utmi";
 			resets = <&rcc USBO_R>;
 			reset-names = "dwc2";
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/dts/stm32mp157a-dk1.dts b/arch/arm/dts/stm32mp157a-dk1.dts
index 4c8be9c8eb..0da3667ab1 100644
--- a/arch/arm/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/dts/stm32mp157a-dk1.dts
@@ -17,9 +17,6 @@
 
 	aliases {
 		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
 	};
 
 	chosen {
diff --git a/arch/arm/dts/stm32mp157c-dk2.dts b/arch/arm/dts/stm32mp157c-dk2.dts
index 2bc92ef3ae..ab13e340f4 100644
--- a/arch/arm/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/dts/stm32mp157c-dk2.dts
@@ -18,9 +18,6 @@
 
 	aliases {
 		ethernet0 = &ethernet0;
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart7;
 		serial3 = &usart2;
 	};
 
diff --git a/arch/arm/dts/stm32mp157c-ed1.dts b/arch/arm/dts/stm32mp157c-ed1.dts
index fe5c8f25ce..3541a17dce 100644
--- a/arch/arm/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/dts/stm32mp157c-ed1.dts
@@ -16,6 +16,10 @@
 	model = "STMicroelectronics STM32MP157C eval daughter";
 	compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
 
+	aliases {
+		serial0 = &uart4;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -65,15 +69,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@e8000000 {
-			reg = <0xe8000000 0x8000000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart4;
 	};
 
 	sd_switch: regulator-sd_switch {
@@ -148,10 +143,6 @@
 	status = "okay";
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index 542226cfcf..ba8e9d9a42 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -14,16 +14,15 @@
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
 	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
 
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
 	aliases {
-		serial0 = &uart4;
 		serial1 = &usart3;
 		ethernet0 = &ethernet0;
 	};
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	clocks {
 		clk_ext_camera: clk-ext-camera {
 			#clock-cells = <0>;
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi
index de761743b2..d3b85a8764 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-som.dtsi
@@ -118,13 +118,12 @@
 
 &ethernet0 {
 	status = "okay";
-	pinctrl-0 = <&ethernet0_rmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-0 = <&ethernet0_rmii_pins_c &mco2_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_c &mco2_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rmii";
 	max-speed = <100>;
 	phy-handle = <&phy0>;
-	st,eth-ref-clk-sel;
 
 	mdio0 {
 		#address-cells = <1>;
@@ -136,7 +135,7 @@
 			/* LAN8710Ai */
 			compatible = "ethernet-phy-id0007.c0f0",
 				     "ethernet-phy-ieee802.3-c22";
-			clocks = <&rcc ETHCK_K>;
+			clocks = <&rcc CK_MCO2>;
 			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500>;
 			reset-deassert-us = <500>;
@@ -450,6 +449,21 @@
 	};
 };
 
+&rcc {
+	/* Connect MCO2 output to ETH_RX_CLK input via pad-pad connection */
+	clocks = <&rcc CK_MCO2>;
+	clock-names = "ETH_RX_CLK/ETH_REF_CLK";
+
+	/*
+	 * Set PLL4P output to 100 MHz to supply SDMMC with faster clock,
+	 * set MCO2 output to 50 MHz to supply ETHRX clock with PLL4P/2,
+	 * so that MCO2 behaves as a divider for the ETHRX clock here.
+	 */
+	assigned-clocks = <&rcc CK_MCO2>, <&rcc PLL4_P>;
+	assigned-clock-parents = <&rcc PLL4_P>;
+	assigned-clock-rates = <50000000>, <100000000>;
+};
+
 &rng1 {
 	status = "okay";
 };
diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index a808620e12..f12941b05f 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -153,6 +153,20 @@
 };
 
 &rcc {
+	/*
+	 * Reinstate clock names from stm32mp151.dtsi, the MCO2 trick
+	 * used in stm32mp15xx-dhcom-som.dtsi is not supported by the
+	 * U-Boot clock framework.
+	 */
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
+		 <&clk_lse>, <&clk_lsi>;
+
+	/* The MCO2 is already configured correctly, remove those. */
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	/delete-property/ assigned-clock-rates;
+
 	st,clksrc = <
 		CLK_MPU_PLL1P
 		CLK_AXI_PLL2P
diff --git a/arch/arm/dts/stm32mp15xx-dkx.dtsi b/arch/arm/dts/stm32mp15xx-dkx.dtsi
index 49b3e768c8..f4de6c0b75 100644
--- a/arch/arm/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dkx.dtsi
@@ -8,6 +8,12 @@
 #include <dt-bindings/mfd/st,stpmic1.h>
 
 / {
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+	};
+
 	memory@c0000000 {
 		device_type = "memory";
 		reg = <0xc0000000 0x20000000>;
@@ -53,11 +59,6 @@
 			reg = <0x38000000 0x10000>;
 			no-map;
 		};
-
-		gpu_reserved: gpu@d4000000 {
-			reg = <0xd4000000 0x4000000>;
-			no-map;
-		};
 	};
 
 	led {
@@ -159,10 +160,6 @@
 	};
 };
 
-&gpu {
-	contiguous-area = <&gpu_reserved>;
-};
-
 &hash1 {
 	status = "okay";
 };
diff --git a/arch/arm/mach-stm32mp/psci.c b/arch/arm/mach-stm32mp/psci.c
index 39b5200949..8cdeb0ab3f 100644
--- a/arch/arm/mach-stm32mp/psci.c
+++ b/arch/arm/mach-stm32mp/psci.c
@@ -729,7 +729,7 @@ void __secure psci_system_suspend(u32 __always_unused function_id,
 	setbits_le32(STM32_RCC_BASE + RCC_MP_CIER, RCC_MP_CIFR_WKUPF);
 
 	setbits_le32(STM32_PWR_BASE + PWR_MPUCR,
-		     PWR_MPUCR_CSSF | PWR_MPUCR_CSTDBYDIS | PWR_MPUCR_PDDS);
+		     PWR_MPUCR_CSSF | PWR_MPUCR_CSTDBYDIS);
 
 	saved_mcudivr = readl(STM32_RCC_BASE + RCC_MCUDIVR);
 	saved_pll3cr = readl(STM32_RCC_BASE + RCC_PLL3CR);