Merge branch '2022-10-31-vbe-implement-the-full-firmware-flow'

To quote Simon:
This series provides an implementation of VBE from TPL through to U-Boot
proper, using VBE to load the relevant firmware stages. It buils a single
image.bin file containing all the phases:

   TPL - initial phase, loads VPL using binman symbols
   VPL - main firmware phase, loads SPL using VBE parameters
   SPL - loads U-Boot proper using VBE parameters
   U-Boot - final firmware phase, where OS booting is processed

This series does not include the OS-booting phase. That will be the
subject of a future series.

The implementation is entirely handled by sandbox. It should be possible
to enable this on a real board without much effort, but that is also the
subject of a future series.

3 files changed, 16 insertions, 16 deletions

diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S
index 4488a6e4c7..6dddbe76f3 100644
--- a/arch/m68k/cpu/mcf52x2/start.S
+++ b/arch/m68k/cpu/mcf52x2/start.S
@@ -35,8 +35,8 @@
  */
 _vectors:
 .long	0x00000000		/* Flash offset is 0 until we setup CS0 */
-#if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-.long	_start - CONFIG_SYS_TEXT_BASE
+#if defined(CONFIG_M5282) && (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+.long	_start - CONFIG_TEXT_BASE
 #else
 .long	_START
 #endif
@@ -83,7 +83,7 @@ _vectors:
 
 #if defined(CONFIG_SYS_INT_FLASH_BASE) && \
     (defined(CONFIG_M5282) || defined(CONFIG_M5281))
-#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 .long	0x55AA55AA,0xAA55AA55		/* CFM Backdoorkey */
 .long	0xFFFFFFFF			/* all sectors protected */
 .long	0x00000000			/* supervisor/User restriction */
@@ -130,7 +130,7 @@ _start:
 	movec	%d0, %RAMBAR1
 
 #if defined(CONFIG_M5282)
-#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 	/*
 	 * Setup code in SRAM to initialize FLASHBAR,
 	 * if start from internal Flash
@@ -156,7 +156,7 @@ _after_flashbar_copy:
 	/* Setup code to initialize FLASHBAR, if start from external Memory */
 	move.l	#(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
 	movec	%d0, %FLASHBAR
-#endif /* (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
+#endif /* (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
 
 #endif
 #endif
@@ -165,7 +165,7 @@ _after_flashbar_copy:
 	 * therefore no VBR to set
 	 */
 #if !defined(CONFIG_MONITOR_IS_IN_RAM)
-#if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if defined(CONFIG_M5282) && (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
 	move.l	#CONFIG_SYS_INT_FLASH_BASE, %d0
 #else
 	move.l	#CONFIG_SYS_FLASH_BASE, %d0
diff --git a/arch/m68k/cpu/mcf530x/start.S b/arch/m68k/cpu/mcf530x/start.S
index 287e8e7873..644c372bdd 100644
--- a/arch/m68k/cpu/mcf530x/start.S
+++ b/arch/m68k/cpu/mcf530x/start.S
@@ -39,8 +39,8 @@ _vectors:
 /* Flash offset is 0 until we setup CS0 */
 .long	0x00000000
 #if defined(CONFIG_M5307) && \
-	   (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-.long	_start - CONFIG_SYS_TEXT_BASE
+	   (CONFIG_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+.long	_start - CONFIG_TEXT_BASE
 #else
 .long	_START
 #endif
diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S
index 27bcd40c5c..aea8f3090f 100644
--- a/arch/m68k/cpu/mcf5445x/start.S
+++ b/arch/m68k/cpu/mcf5445x/start.S
@@ -26,10 +26,10 @@
 	rte;
 
 #if defined(CONFIG_SERIAL_BOOT)
-#define ASM_DRAMINIT	(asm_dram_init - CONFIG_SYS_TEXT_BASE + \
+#define ASM_DRAMINIT	(asm_dram_init - CONFIG_TEXT_BASE + \
 	CONFIG_SYS_INIT_RAM_ADDR)
-#define ASM_DRAMINIT_N	(asm_dram_init - CONFIG_SYS_TEXT_BASE)
-#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + \
+#define ASM_DRAMINIT_N	(asm_dram_init - CONFIG_TEXT_BASE)
+#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - CONFIG_TEXT_BASE + \
 	CONFIG_SYS_INIT_RAM_ADDR)
 #endif
 
@@ -116,7 +116,7 @@ vector192_255:
 asm_sbf_img_hdr:
 	.long	0x00000000		/* checksum, not yet implemented */
 	.long	0x00040000		/* image length */
-	.long	CONFIG_SYS_TEXT_BASE	/* image to be relocated at */
+	.long	CONFIG_TEXT_BASE	/* image to be relocated at */
 
 asm_dram_init:
 	move.w	#0x2700,%sr		/* Mask off Interrupt */
@@ -271,7 +271,7 @@ asm_dspi_rd_loop2:
 	jsr	asm_dspi_rd_status
 
 	/* jump to memory and execute */
-	move.l	#(CONFIG_SYS_TEXT_BASE + 0x400), %a0
+	move.l	#(CONFIG_TEXT_BASE + 0x400), %a0
 	jmp	(%a0)
 
 asm_dspi_wr_status:
@@ -298,7 +298,7 @@ asm_dspi_rd_status:
 	/* copy 4 boot pages to dram as soon as possible */
 	/* each page is 996 bytes (1056 total with 60 ECC bytes */
 	move.l  #0x00000000, %a1	/* src */
-	move.l	#CONFIG_SYS_TEXT_BASE, %a2		/* dst */
+	move.l	#CONFIG_TEXT_BASE, %a2		/* dst */
 	move.l	#0x3E0, %d0		/* sz in long */
 
 asm_boot_nand_copy:
@@ -381,7 +381,7 @@ asm_nand_init:
 	move.l	#4, %d2			/* start at 4 */
 	move.l  #0xFC0FFF04, %a0	/* cmd2 */
 	move.l  #0xFC0FFF0C, %a1	/* rar */
-	move.l	#(CONFIG_SYS_TEXT_BASE + 0xF80), %a2
+	move.l	#(CONFIG_TEXT_BASE + 0xF80), %a2
 
 asm_nand_read:
 	move.l	#0x11000000, %d0	/* rar */
@@ -419,7 +419,7 @@ asm_nand_copy:
 	bgt	asm_nand_read
 
 	/* jump to memory and execute */
-	move.l	#(CONFIG_SYS_TEXT_BASE + 0x400), %a0
+	move.l	#(CONFIG_TEXT_BASE + 0x400), %a0
 	jmp	(%a0)
 
 #endif			/* CONFIG_SYS_NAND_BOOT */