Merge branch 'master' of git://git.denx.de/u-boot-socfpga

1 files changed, 18 insertions, 507 deletions

diff --git a/arch/arm/mach-socfpga/clock_manager.c b/arch/arm/mach-socfpga/clock_manager.c
index 29e18f8996..cb6ae03696 100644
--- a/arch/arm/mach-socfpga/clock_manager.c
+++ b/arch/arm/mach-socfpga/clock_manager.c
@@ -1,10 +1,11 @@
 /*
- *  Copyright (C) 2013 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2013-2017 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
+#include <wait_bit.h>
 #include <asm/io.h>
 #include <asm/arch/clock_manager.h>
 
@@ -13,12 +14,17 @@ DECLARE_GLOBAL_DATA_PTR;
 static const struct socfpga_clock_manager *clock_manager_base =
 	(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
 
-static void cm_wait_for_lock(uint32_t mask)
+void cm_wait_for_lock(u32 mask)
 {
-	register uint32_t inter_val;
-	uint32_t retry = 0;
+	u32 inter_val;
+	u32 retry = 0;
 	do {
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 		inter_val = readl(&clock_manager_base->inter) & mask;
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+		inter_val = readl(&clock_manager_base->stat) & mask;
+#endif
+		/* Wait for stable lock */
 		if (inter_val == mask)
 			retry++;
 		else
@@ -29,510 +35,10 @@ static void cm_wait_for_lock(uint32_t mask)
 }
 
 /* function to poll in the fsm busy bit */
-static void cm_wait_for_fsm(void)
+int cm_wait_for_fsm(void)
 {
-	while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
-		;
-}
-
-/*
- * function to write the bypass register which requires a poll of the
- * busy bit
- */
-static void cm_write_bypass(uint32_t val)
-{
-	writel(val, &clock_manager_base->bypass);
-	cm_wait_for_fsm();
-}
-
-/* function to write the ctrl register which requires a poll of the busy bit */
-static void cm_write_ctrl(uint32_t val)
-{
-	writel(val, &clock_manager_base->ctrl);
-	cm_wait_for_fsm();
-}
-
-/* function to write a clock register that has phase information */
-static void cm_write_with_phase(uint32_t value,
-				uint32_t reg_address, uint32_t mask)
-{
-	/* poll until phase is zero */
-	while (readl(reg_address) & mask)
-		;
-
-	writel(value, reg_address);
-
-	while (readl(reg_address) & mask)
-		;
-}
-
-/*
- * Setup clocks while making no assumptions about previous state of the clocks.
- *
- * Start by being paranoid and gate all sw managed clocks
- * Put all plls in bypass
- * Put all plls VCO registers back to reset value (bandgap power down).
- * Put peripheral and main pll src to reset value to avoid glitch.
- * Delay 5 us.
- * Deassert bandgap power down and set numerator and denominator
- * Start 7 us timer.
- * set internal dividers
- * Wait for 7 us timer.
- * Enable plls
- * Set external dividers while plls are locking
- * Wait for pll lock
- * Assert/deassert outreset all.
- * Take all pll's out of bypass
- * Clear safe mode
- * set source main and peripheral clocks
- * Ungate clocks
- */
-
-void cm_basic_init(const struct cm_config * const cfg)
-{
-	unsigned long end;
-
-	/* Start by being paranoid and gate all sw managed clocks */
-
-	/*
-	 * We need to disable nandclk
-	 * and then do another apb access before disabling
-	 * gatting off the rest of the periperal clocks.
-	 */
-	writel(~CLKMGR_PERPLLGRP_EN_NANDCLK_MASK &
-		readl(&clock_manager_base->per_pll.en),
-		&clock_manager_base->per_pll.en);
-
-	/* DO NOT GATE OFF DEBUG CLOCKS & BRIDGE CLOCKS */
-	writel(CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK |
-		CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK,
-		&clock_manager_base->main_pll.en);
-
-	writel(0, &clock_manager_base->sdr_pll.en);
-
-	/* now we can gate off the rest of the peripheral clocks */
-	writel(0, &clock_manager_base->per_pll.en);
-
-	/* Put all plls in bypass */
-	cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
-			CLKMGR_BYPASS_MAINPLL);
-
-	/* Put all plls VCO registers back to reset value. */
-	writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
-	       ~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
-	       &clock_manager_base->main_pll.vco);
-	writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
-	       ~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
-	       &clock_manager_base->per_pll.vco);
-	writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
-	       ~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
-	       &clock_manager_base->sdr_pll.vco);
-
-	/*
-	 * The clocks to the flash devices and the L4_MAIN clocks can
-	 * glitch when coming out of safe mode if their source values
-	 * are different from their reset value.  So the trick it to
-	 * put them back to their reset state, and change input
-	 * after exiting safe mode but before ungating the clocks.
-	 */
-	writel(CLKMGR_PERPLLGRP_SRC_RESET_VALUE,
-	       &clock_manager_base->per_pll.src);
-	writel(CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE,
-	       &clock_manager_base->main_pll.l4src);
-
-	/* read back for the required 5 us delay. */
-	readl(&clock_manager_base->main_pll.vco);
-	readl(&clock_manager_base->per_pll.vco);
-	readl(&clock_manager_base->sdr_pll.vco);
-
-
-	/*
-	 * We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
-	 * with numerator and denominator.
-	 */
-	writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
-	writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
-	writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
-
-	/*
-	 * Time starts here. Must wait 7 us from
-	 * BGPWRDN_SET(0) to VCO_ENABLE_SET(1).
-	 */
-	end = timer_get_us() + 7;
-
-	/* main mpu */
-	writel(cfg->mpuclk, &clock_manager_base->main_pll.mpuclk);
-
-	/* altera group mpuclk */
-	writel(cfg->altera_grp_mpuclk, &clock_manager_base->altera.mpuclk);
-
-	/* main main clock */
-	writel(cfg->mainclk, &clock_manager_base->main_pll.mainclk);
-
-	/* main for dbg */
-	writel(cfg->dbgatclk, &clock_manager_base->main_pll.dbgatclk);
-
-	/* main for cfgs2fuser0clk */
-	writel(cfg->cfg2fuser0clk,
-	       &clock_manager_base->main_pll.cfgs2fuser0clk);
-
-	/* Peri emac0 50 MHz default to RMII */
-	writel(cfg->emac0clk, &clock_manager_base->per_pll.emac0clk);
-
-	/* Peri emac1 50 MHz default to RMII */
-	writel(cfg->emac1clk, &clock_manager_base->per_pll.emac1clk);
-
-	/* Peri QSPI */
-	writel(cfg->mainqspiclk, &clock_manager_base->main_pll.mainqspiclk);
-
-	writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
-
-	/* Peri pernandsdmmcclk */
-	writel(cfg->mainnandsdmmcclk,
-	       &clock_manager_base->main_pll.mainnandsdmmcclk);
-
-	writel(cfg->pernandsdmmcclk,
-	       &clock_manager_base->per_pll.pernandsdmmcclk);
-
-	/* Peri perbaseclk */
-	writel(cfg->perbaseclk, &clock_manager_base->per_pll.perbaseclk);
-
-	/* Peri s2fuser1clk */
-	writel(cfg->s2fuser1clk, &clock_manager_base->per_pll.s2fuser1clk);
-
-	/* 7 us must have elapsed before we can enable the VCO */
-	while (timer_get_us() < end)
-		;
-
-	/* Enable vco */
-	/* main pll vco */
-	writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->main_pll.vco);
-
-	/* periferal pll */
-	writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->per_pll.vco);
-
-	/* sdram pll vco */
-	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->sdr_pll.vco);
-
-	/* L3 MP and L3 SP */
-	writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
-
-	writel(cfg->dbgdiv, &clock_manager_base->main_pll.dbgdiv);
-
-	writel(cfg->tracediv, &clock_manager_base->main_pll.tracediv);
-
-	/* L4 MP, L4 SP, can0, and can1 */
-	writel(cfg->perdiv, &clock_manager_base->per_pll.div);
-
-	writel(cfg->gpiodiv, &clock_manager_base->per_pll.gpiodiv);
-
-#define LOCKED_MASK \
-	(CLKMGR_INTER_SDRPLLLOCKED_MASK  | \
-	CLKMGR_INTER_PERPLLLOCKED_MASK  | \
-	CLKMGR_INTER_MAINPLLLOCKED_MASK)
-
-	cm_wait_for_lock(LOCKED_MASK);
-
-	/* write the sdram clock counters before toggling outreset all */
-	writel(cfg->ddrdqsclk & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.ddrdqsclk);
-
-	writel(cfg->ddr2xdqsclk & CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.ddr2xdqsclk);
-
-	writel(cfg->ddrdqclk & CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.ddrdqclk);
-
-	writel(cfg->s2fuser2clk & CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK,
-	       &clock_manager_base->sdr_pll.s2fuser2clk);
-
-	/*
-	 * after locking, but before taking out of bypass
-	 * assert/deassert outresetall
-	 */
-	uint32_t mainvco = readl(&clock_manager_base->main_pll.vco);
-
-	/* assert main outresetall */
-	writel(mainvco | CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->main_pll.vco);
-
-	uint32_t periphvco = readl(&clock_manager_base->per_pll.vco);
-
-	/* assert pheriph outresetall */
-	writel(periphvco | CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->per_pll.vco);
-
-	/* assert sdram outresetall */
-	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
-		CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
-		&clock_manager_base->sdr_pll.vco);
-
-	/* deassert main outresetall */
-	writel(mainvco & ~CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->main_pll.vco);
-
-	/* deassert pheriph outresetall */
-	writel(periphvco & ~CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK,
-	       &clock_manager_base->per_pll.vco);
-
-	/* deassert sdram outresetall */
-	writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
-	       &clock_manager_base->sdr_pll.vco);
-
-	/*
-	 * now that we've toggled outreset all, all the clocks
-	 * are aligned nicely; so we can change any phase.
-	 */
-	cm_write_with_phase(cfg->ddrdqsclk,
-			    (uint32_t)&clock_manager_base->sdr_pll.ddrdqsclk,
-			    CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK);
-
-	/* SDRAM DDR2XDQSCLK */
-	cm_write_with_phase(cfg->ddr2xdqsclk,
-			    (uint32_t)&clock_manager_base->sdr_pll.ddr2xdqsclk,
-			    CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK);
-
-	cm_write_with_phase(cfg->ddrdqclk,
-			    (uint32_t)&clock_manager_base->sdr_pll.ddrdqclk,
-			    CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK);
-
-	cm_write_with_phase(cfg->s2fuser2clk,
-			    (uint32_t)&clock_manager_base->sdr_pll.s2fuser2clk,
-			    CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
-
-	/* Take all three PLLs out of bypass when safe mode is cleared. */
-	cm_write_bypass(0);
-
-	/* clear safe mode */
-	cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
-
-	/*
-	 * now that safe mode is clear with clocks gated
-	 * it safe to change the source mux for the flashes the the L4_MAIN
-	 */
-	writel(cfg->persrc, &clock_manager_base->per_pll.src);
-	writel(cfg->l4src, &clock_manager_base->main_pll.l4src);
-
-	/* Now ungate non-hw-managed clocks */
-	writel(~0, &clock_manager_base->main_pll.en);
-	writel(~0, &clock_manager_base->per_pll.en);
-	writel(~0, &clock_manager_base->sdr_pll.en);
-
-	/* Clear the loss of lock bits (write 1 to clear) */
-	writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
-	       CLKMGR_INTER_MAINPLLLOST_MASK,
-	       &clock_manager_base->inter);
-}
-
-static unsigned int cm_get_main_vco_clk_hz(void)
-{
-	uint32_t reg, clock;
-
-	/* get the main VCO clock */
-	reg = readl(&clock_manager_base->main_pll.vco);
-	clock = cm_get_osc_clk_hz(1);
-	clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	return clock;
-}
-
-static unsigned int cm_get_per_vco_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify PER PLL clock source */
-	reg = readl(&clock_manager_base->per_pll.vco);
-	reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
-	      CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
-	if (reg == CLKMGR_VCO_SSRC_EOSC1)
-		clock = cm_get_osc_clk_hz(1);
-	else if (reg == CLKMGR_VCO_SSRC_EOSC2)
-		clock = cm_get_osc_clk_hz(2);
-	else if (reg == CLKMGR_VCO_SSRC_F2S)
-		clock = cm_get_f2s_per_ref_clk_hz();
-
-	/* get the PER VCO clock */
-	reg = readl(&clock_manager_base->per_pll.vco);
-	clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	return clock;
-}
-
-unsigned long cm_get_mpu_clk_hz(void)
-{
-	uint32_t reg, clock;
-
-	clock = cm_get_main_vco_clk_hz();
-
-	/* get the MPU clock */
-	reg = readl(&clock_manager_base->altera.mpuclk);
-	clock /= (reg + 1);
-	reg = readl(&clock_manager_base->main_pll.mpuclk);
-	clock /= (reg + 1);
-	return clock;
-}
-
-unsigned long cm_get_sdram_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify SDRAM PLL clock source */
-	reg = readl(&clock_manager_base->sdr_pll.vco);
-	reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
-	      CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
-	if (reg == CLKMGR_VCO_SSRC_EOSC1)
-		clock = cm_get_osc_clk_hz(1);
-	else if (reg == CLKMGR_VCO_SSRC_EOSC2)
-		clock = cm_get_osc_clk_hz(2);
-	else if (reg == CLKMGR_VCO_SSRC_F2S)
-		clock = cm_get_f2s_sdr_ref_clk_hz();
-
-	/* get the SDRAM VCO clock */
-	reg = readl(&clock_manager_base->sdr_pll.vco);
-	clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
-		  CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
-	clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
-		  CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
-
-	/* get the SDRAM (DDR_DQS) clock */
-	reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
-	reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
-	      CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
-	clock /= (reg + 1);
-
-	return clock;
-}
-
-unsigned int cm_get_l4_sp_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify the source of L4 SP clock */
-	reg = readl(&clock_manager_base->main_pll.l4src);
-	reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
-	      CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
-
-	if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
-		clock = cm_get_main_vco_clk_hz();
-
-		/* get the clock prior L4 SP divider (main clk) */
-		reg = readl(&clock_manager_base->altera.mainclk);
-		clock /= (reg + 1);
-		reg = readl(&clock_manager_base->main_pll.mainclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
-		clock = cm_get_per_vco_clk_hz();
-
-		/* get the clock prior L4 SP divider (periph_base_clk) */
-		reg = readl(&clock_manager_base->per_pll.perbaseclk);
-		clock /= (reg + 1);
-	}
-
-	/* get the L4 SP clock which supplied to UART */
-	reg = readl(&clock_manager_base->main_pll.maindiv);
-	reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
-	      CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
-	clock = clock / (1 << reg);
-
-	return clock;
-}
-
-unsigned int cm_get_mmc_controller_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify the source of MMC clock */
-	reg = readl(&clock_manager_base->per_pll.src);
-	reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
-	      CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
-
-	if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
-		clock = cm_get_f2s_per_ref_clk_hz();
-	} else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
-		clock = cm_get_main_vco_clk_hz();
-
-		/* get the SDMMC clock */
-		reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
-		clock = cm_get_per_vco_clk_hz();
-
-		/* get the SDMMC clock */
-		reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
-		clock /= (reg + 1);
-	}
-
-	/* further divide by 4 as we have fixed divider at wrapper */
-	clock /= 4;
-	return clock;
-}
-
-unsigned int cm_get_qspi_controller_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	/* identify the source of QSPI clock */
-	reg = readl(&clock_manager_base->per_pll.src);
-	reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
-	      CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
-
-	if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
-		clock = cm_get_f2s_per_ref_clk_hz();
-	} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
-		clock = cm_get_main_vco_clk_hz();
-
-		/* get the qspi clock */
-		reg = readl(&clock_manager_base->main_pll.mainqspiclk);
-		clock /= (reg + 1);
-	} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
-		clock = cm_get_per_vco_clk_hz();
-
-		/* get the qspi clock */
-		reg = readl(&clock_manager_base->per_pll.perqspiclk);
-		clock /= (reg + 1);
-	}
-
-	return clock;
-}
-
-unsigned int cm_get_spi_controller_clk_hz(void)
-{
-	uint32_t reg, clock = 0;
-
-	clock = cm_get_per_vco_clk_hz();
-
-	/* get the clock prior L4 SP divider (periph_base_clk) */
-	reg = readl(&clock_manager_base->per_pll.perbaseclk);
-	clock /= (reg + 1);
-
-	return clock;
-}
-
-static void cm_print_clock_quick_summary(void)
-{
-	printf("MPU       %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
-	printf("DDR       %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
-	printf("EOSC1       %8d kHz\n", cm_get_osc_clk_hz(1) / 1000);
-	printf("EOSC2       %8d kHz\n", cm_get_osc_clk_hz(2) / 1000);
-	printf("F2S_SDR_REF %8d kHz\n", cm_get_f2s_sdr_ref_clk_hz() / 1000);
-	printf("F2S_PER_REF %8d kHz\n", cm_get_f2s_per_ref_clk_hz() / 1000);
-	printf("MMC         %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
-	printf("QSPI        %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
-	printf("UART        %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
-	printf("SPI         %8d kHz\n", cm_get_spi_controller_clk_hz() / 1000);
+	return wait_for_bit(__func__, (const u32 *)&clock_manager_base->stat,
+			    CLKMGR_STAT_BUSY, false, 20000, false);
 }
 
 int set_cpu_clk_info(void)
@@ -543,7 +49,12 @@ int set_cpu_clk_info(void)
 
 	gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
 	gd->bd->bi_dsp_freq = 0;
+
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
 	gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
+#elif defined(CONFIG_TARGET_SOCFPGA_ARRIA10)
+	gd->bd->bi_ddr_freq = 0;
+#endif
 
 	return 0;
 }