Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  drivers/rtc: add Marvell Integrated RTC
  Armada100: Add Board Support for Marvell GuruPlug-Display
  Armada100: MFP macro naming correction
  arm: auto gen asm-offsets.h for mb86r0x
  spear: fix build errors for spear3xx/spear600 platforms
  cosmetic: arm: lib/board.c: Coding Style cleanup
  ARM: versatile: fix board support
  SMDKV310: Enable device tree support
  SMDKV310: MMC_SPL: Fix building when using "make O="
  arm: a320: enable tagged list support
  arm: a320: fix multiline comment style
  ARMv7: u8500_href: Add missing header to fix compiler warning
  Removed unused define, CONFIG_ARMV7.
  avr32: add grasshopper (ICnova AP7000) board
  AT91/SPI: fix atmel_dataflash_spi.c to allow building without warnings
  MAKEALL: remove AT91 boards that are in boards.cfg
  AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master
  AT91: Makes AT91SAM9263 SoC build correctly against u-boot-atmel/master
  AT91: Board fix for AT91SAM9261-EK
  AT91: SoC fix at91sam9261_matrix.h
  AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
  AT91: Makes AT91SAM9RL SoC build correctly against u-boot-atmel/master
  AT91: change common at91sam9261 files to compile with new scheme
  AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init)
  a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART
  README: fix arm920t/at91 path
  net/eth.c: drop obsolete at91rm9200 support
  README.at91-soc: remove AT91(RM9200) joining notice
  a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning
  MAKEALL: remove obsolete at91rm9200 soc
  ARM: remove obsolete at91rm9200
  omap4: clock init support for omap4460
  omap4: support TPS programming
  omap: reuse omap3 gpio support in omap4
  omap4: sdram init changes for omap4460
  omap4: add omap4460 revision detection
  mkimage: Add OMAP boot image support
  omap: add MMC and FAT support to SPL
  omap: add basic SPL support
  armv7: start.S: fixes and enhancements for SPL
  omap4: automatic sdram detection
  omap4: calculate EMIF register values
  omap4: add sdram init support
  omap4: add clock support
  omap4: add OMAP4430 revision check
  omap4: cleanup pin mux data
  omap4: utility function to identify the context of hw init
  DA8xx: fix LPSC constants
  DA8xx: switch an enum to defines for consistency
  DA8xx: add MMC/SD controller addresses
  DaVinci EMAC: declare function for all DA8xx CPUs
  DA8xx: add generic GPIO driver
  DaVinci: rename gpio_defs.h to gpio.h
  omap3evm: eth: Include functions only when necessary
  omap3evm: Update ethernet reset sequence for Rev.G board
  omap3evm: eth: split function setup_net_chip
  omap3: Include array definition only when it is used
  omap730p2: fix build breaks
  omap2420h4: fix build breaks
  omap1610inn: fix build breaks
  omap1510inn: fix build breaks
  omap5912osk: fix build breaks
  omap1610h2: fix build breaks

1 files changed, 70 insertions, 2 deletions

diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 4fa4f4b2db..a81f8e5c24 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -22,21 +22,89 @@
 #define _SYS_PROTO_H_
 
 #include <asm/arch/omap4.h>
+#include <asm/arch/clocks.h>
 #include <asm/io.h>
+#include <asm/omap_common.h>
+#include <asm/arch/mux_omap4.h>
 
 struct omap_sysinfo {
 	char *board_string;
 };
+extern const struct omap_sysinfo sysinfo;
+
+extern struct omap4_prcm_regs *const prcm;
 
 void gpmc_init(void);
 void watchdog_init(void);
 u32 get_device_type(void);
-void set_muxconf_regs(void);
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs_non_essential(void);
 void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
 void set_pl310_ctrl_reg(u32 val);
+void omap_rev_string(char *omap4_rev_string);
+void setup_clocks_for_console(void);
+void prcm_init(void);
+void bypass_dpll(u32 *const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap4_ddr_clk(void);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdram_init(void);
+u32 omap4_sdram_size(void);
 
-extern const struct omap_sysinfo sysinfo;
+static inline u32 running_from_sdram(void)
+{
+	u32 pc;
+	asm volatile ("mov %0, pc" : "=r" (pc));
+	return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
+	    (pc < OMAP44XX_DRAM_ADDR_SPACE_END));
+}
+
+static inline u8 uboot_loaded_by_spl(void)
+{
+	/*
+	 * Configuration Header is not supported yet, so u-boot init running
+	 * from SDRAM implies that it was loaded by SPL. When this situation
+	 * changes one of these approaches could be taken:
+	 * i.  Pass a magic from SPL to U-Boot and U-Boot save it at a known
+	 *     location.
+	 * ii. Check the OPP. CH can support only 50% OPP while SPL initializes
+	 *     the DPLLs at 100% OPP.
+	 */
+	return running_from_sdram();
+}
+/*
+ * The basic hardware init of OMAP(s_init()) can happen in 4
+ * different contexts:
+ *  1. SPL running from SRAM
+ *  2. U-Boot running from FLASH
+ *  3. Non-XIP U-Boot loaded to SDRAM by SPL
+ *  4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
+ *     Configuration Header feature
+ *
+ * This function finds this context.
+ * Defining as inline may help in compiling out unused functions in SPL
+ */
+static inline u32 omap4_hw_init_context(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	return OMAP_INIT_CONTEXT_SPL;
+#else
+	if (uboot_loaded_by_spl())
+		return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
+	else if (running_from_sdram())
+		return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
+	else
+		return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
+#endif
+}
+
+static inline u32 omap_revision(void)
+{
+	extern u32 *const omap4_revision;
+	return *omap4_revision;
+}
 
 #endif