Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (167 commits)
  OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer
  ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT
  ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
  arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx
  OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree
  omap4: do not enable auxiliary cores
  omap4: do not enable fs-usb module
  omap4: panda: disable uart2 pads during boot
  igep00x0: change mpurate from 500 to auto
  igep00x0: enable the use of a plain text file
  tegra2: trivially enable 13 mhz crystal frequency
  tegra: Enable keyboard for Seaboard
  tegra: Switch on console mux and use environment for console
  tegra: Add tegra keyboard driver
  tegra: fdt: Add keyboard definitions for Seaboard
  tegra: fdt: Add keyboard controller definition
  tegra: Add keyboard support to funcmux
  input: Add support for keyboard matrix decoding from an fdt
  input: Add generic keyboard input handler
  input: Add linux/input.h for key code support
  fdt: Add fdtdec functions to read byte array
  tegra: Enable LP0 on Seaboard
  tegra: fdt: Add EMC data for Tegra2 Seaboard
  tegra: i2c: Add function to find DVC bus
  fdt: tegra: Add EMC node to device tree
  tegra: Add EMC settings for Seaboard
  tegra: Turn off power detect in board init
  tegra: Set up warmboot code on Nvidia boards
  tegra: Setup PMC scratch info from ap20 setup
  tegra: Add warmboot implementation
  tegra: Set up PMU for Nvidia boards
  tegra: Add PMU to manage power supplies
  tegra: Add EMC support for optimal memory timings
  tegra: Add header file for APB_MISC register
  tegra: Add tegra_get_chip_type() to detect SKU
  tegra: Add flow, gp_padctl, fuse, sdram headers
  tegra: Add crypto library for warmboot code
  tegra: Add functions to access low-level Osc/PLL details
  tegra: Move ap20.h header into arch location
  Add AES crypto library
  i2c: Add TPS6586X driver
  Add abs() macro to return absolute value
  fdt: Add function to return next compatible subnode
  fdt: Add function to locate an array in the device tree
  i.MX28: Avoid redefining serial_put[cs]()
  i.MX28: Check if WP detection is implemented at all
  i.MX28: Add battery boot components to SPL
  i.MX28: Reorder battery status functions in SPL
  i.MX28: Add LRADC init to i.MX28 SPL
  i.MX28: Add LRADC register definitions
  i.MX28: Shut down the LCD controller before reset
  i.MX28: Add LCDIF register definitions
  i.MX28: Implement boot pads sampling and reporting
  i.MX28: Improve passing of data from SPL to U-Boot
  M28EVK: Add SD update command
  M28EVK: Implement support for new board V2.0
  FEC: Abstract out register setup
  MX5: PAD_CTL_DRV_VOT_LOW and PAD_CTL_DRV_VOT_HIGH exchanged
  i.MX28: Add delay after CPU bypass is cleared
  spi: mxs: Allow other chip selects to work
  spi: mxs: Introduce spi_cs_is_valid()
  mx53loco: Remove unneeded gpio_set_value()
  mx53loco: Add CONFIG_REVISION_TAG
  mx53loco: Turn on VUSB regulator
  mx53loco: Add mc34708 support and set mx53 frequency at 1GHz
  pmic: dialog: Avoid name conflicts
  imx: Add u-boot.imx as target for ARM9 i.MX SOCs
  i.MX2: Include asm/types.h in arch-mx25/imx-regs.h
  imx: usb: There is no such register
  i.MX25: usb: Set PORTSCx register
  imx: nand: Support flash based BBT
  i.MX25: This architecture has a GPIO4 too
  i.MX25: esdhc: Add mxc_get_clock infrastructure
  i.MX6: mx6q_sabrelite: add SATA bindings
  i.MX6: add enable_sata_clock()
  i.MX6: Add ANATOP regulator init
  mx28evk: add NAND support
  USB: ehci-mx6: Fix broken IO access
  M28: Scan only first 512 MB of DRAM to avoid memory wraparound
  Revert "i.MX28: Enable additional DRAM address bits"
  M28: Enable FDT support
  mx53loco: Add support for 1GHz operation for DA9053-based boards
  mx53loco: Allow to print CPU information at a later stage
  mx5: Add clock config interface
  imx-common: Factor out get_ahb_clk()
  i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow
  mx31pdk: Allow booting a zImage kernel
  mx6qarm2: Allow booting a zImage kernel
  mx6qsabrelite: Allow booting a zImage kernel
  mx28evk: Allow booting a zImage kernel
  m28evk: Allow to booting a dt kernel
  mx28evk: Allow to booting a dt kernel
  mx6qsabrelite: No need to set the direction for GPIO3_23 again
  pmic: Add support for the Dialog DA9053 PMIC
  MX53: mx53loco: Add SATA support
  MX53: Add support to ESG ima3 board
  SATA: add driver for MX5 / MX6 SOCs
  MX53: add function to set SATA clock to internal
  SATA: check for return value from sata functions
  MX5: Add definitions for SATA controller
  NET: fec_mxc.c: Add a way to disable auto negotiation
  Define UART4 and UART5 base addresses
  EXYNOS: Change bits per pixel value proper for u-boot.
  EXYNOS: support TRATS board display function
  LCD: support S6E8AX0 amoled driver based on EXYNOS MIPI DSI
  EXYNOS: support EXYNOS MIPI DSI interface driver.
  EXYNOS: support EXYNOS framebuffer and FIMD display drivers.
  LCD: add data structure for EXYNOS display driver
  EXYNOS: add LCD and MIPI DSI clock interface.
  EXYNOS: definitions of system resgister and power management registers.
  SMDK5250: fix compiler warning
  misc:pmic:samsung Convert TRATS target to use MAX8997 instead of MAX8998
  misc:pmic:max8997 MAX8997 support for PMIC driver
  TRATS: modify the trats's configuration
  ARM: Exynos4: ADC: Universal_C210: Enable LDO4 power line for ADC measurement
  EXYNOS: Rename exynos5_tzpc structure to exynos_tzpc
  arm: ea20: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  arm: cam_enc_4xx: Change macro from BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT
  cm-t35: add I2C multi-bus support
  include/configs: Remove CONFIG_SYS_64BIT_STRTOUL
  include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF
  omap3: Introduce weak misc_init_r
  omap730p2: Remove empty misc_init_r
  omap5912osk: Remove empty misc_init_r
  omap4+: Remove CONFIG_ARCH_CPU_INIT
  omap4: Remove CONFIG_SYS_MMC_SET_DEV
  OMAP3: pandora: drop console kernel argument
  OMAP3: pandora: revise GPIO configuration
  ...

1 files changed, 230 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/tegra2/crypto.c b/arch/arm/cpu/armv7/tegra2/crypto.c
new file mode 100644
index 0000000000..5f0b240e27
--- /dev/null
+++ b/arch/arm/cpu/armv7/tegra2/crypto.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include "crypto.h"
+#include "aes.h"
+
+static u8 zero_key[16];
+
+#define AES_CMAC_CONST_RB 0x87  /* from RFC 4493, Figure 2.2 */
+
+enum security_op {
+	SECURITY_SIGN		= 1 << 0,	/* Sign the data */
+	SECURITY_ENCRYPT	= 1 << 1,	/* Encrypt the data */
+};
+
+static void debug_print_vector(char *name, u32 num_bytes, u8 *data)
+{
+	u32 i;
+
+	debug("%s [%d] @0x%08x", name, num_bytes, (u32)data);
+	for (i = 0; i < num_bytes; i++) {
+		if (i % 16 == 0)
+			debug(" = ");
+		debug("%02x", data[i]);
+		if ((i+1) % 16 != 0)
+			debug(" ");
+	}
+	debug("\n");
+}
+
+/**
+ * Apply chain data to the destination using EOR
+ *
+ * Each array is of length AES_AES_KEY_LENGTH.
+ *
+ * \param cbc_chain_data	Chain data
+ * \param src			Source data
+ * \param dst			Destination data, which is modified here
+ */
+static void apply_cbc_chain_data(u8 *cbc_chain_data, u8 *src, u8 *dst)
+{
+	int i;
+
+	for (i = 0; i < 16; i++)
+		*dst++ = *src++ ^ *cbc_chain_data++;
+}
+
+/**
+ * Encrypt some data with AES.
+ *
+ * \param key_schedule		Expanded key to use
+ * \param src			Source data to encrypt
+ * \param dst			Destination buffer
+ * \param num_aes_blocks	Number of AES blocks to encrypt
+ */
+static void encrypt_object(u8 *key_schedule, u8 *src, u8 *dst,
+			   u32 num_aes_blocks)
+{
+	u8 tmp_data[AES_KEY_LENGTH];
+	u8 *cbc_chain_data;
+	u32 i;
+
+	cbc_chain_data = zero_key;	/* Convenient array of 0's for IV */
+
+	for (i = 0; i < num_aes_blocks; i++) {
+		debug("encrypt_object: block %d of %d\n", i, num_aes_blocks);
+		debug_print_vector("AES Src", AES_KEY_LENGTH, src);
+
+		/* Apply the chain data */
+		apply_cbc_chain_data(cbc_chain_data, src, tmp_data);
+		debug_print_vector("AES Xor", AES_KEY_LENGTH, tmp_data);
+
+		/* encrypt the AES block */
+		aes_encrypt(tmp_data, key_schedule, dst);
+		debug_print_vector("AES Dst", AES_KEY_LENGTH, dst);
+
+		/* Update pointers for next loop. */
+		cbc_chain_data = dst;
+		src += AES_KEY_LENGTH;
+		dst += AES_KEY_LENGTH;
+	}
+}
+
+/**
+ * Shift a vector left by one bit
+ *
+ * \param in	Input vector
+ * \param out	Output vector
+ * \param size	Length of vector in bytes
+ */
+static void left_shift_vector(u8 *in, u8 *out, int size)
+{
+	int carry = 0;
+	int i;
+
+	for (i = size - 1; i >= 0; i--) {
+		out[i] = (in[i] << 1) | carry;
+		carry = in[i] >> 7;	/* get most significant bit */
+	}
+}
+
+/**
+ * Sign a block of data, putting the result into dst.
+ *
+ * \param key			Input AES key, length AES_KEY_LENGTH
+ * \param key_schedule		Expanded key to use
+ * \param src			Source data of length 'num_aes_blocks' blocks
+ * \param dst			Destination buffer, length AES_KEY_LENGTH
+ * \param num_aes_blocks	Number of AES blocks to encrypt
+ */
+static void sign_object(u8 *key, u8 *key_schedule, u8 *src, u8 *dst,
+			u32 num_aes_blocks)
+{
+	u8 tmp_data[AES_KEY_LENGTH];
+	u8 left[AES_KEY_LENGTH];
+	u8 k1[AES_KEY_LENGTH];
+	u8 *cbc_chain_data;
+	unsigned i;
+
+	cbc_chain_data = zero_key;	/* Convenient array of 0's for IV */
+
+	/* compute K1 constant needed by AES-CMAC calculation */
+	for (i = 0; i < AES_KEY_LENGTH; i++)
+		tmp_data[i] = 0;
+
+	encrypt_object(key_schedule, tmp_data, left, 1);
+	debug_print_vector("AES(key, nonce)", AES_KEY_LENGTH, left);
+
+	left_shift_vector(left, k1, sizeof(left));
+	debug_print_vector("L", AES_KEY_LENGTH, left);
+
+	if ((left[0] >> 7) != 0) /* get MSB of L */
+		k1[AES_KEY_LENGTH-1] ^= AES_CMAC_CONST_RB;
+	debug_print_vector("K1", AES_KEY_LENGTH, k1);
+
+	/* compute the AES-CMAC value */
+	for (i = 0; i < num_aes_blocks; i++) {
+		/* Apply the chain data */
+		apply_cbc_chain_data(cbc_chain_data, src, tmp_data);
+
+		/* for the final block, XOR K1 into the IV */
+		if (i == num_aes_blocks - 1)
+			apply_cbc_chain_data(tmp_data, k1, tmp_data);
+
+		/* encrypt the AES block */
+		aes_encrypt(tmp_data, key_schedule, dst);
+
+		debug("sign_obj: block %d of %d\n", i, num_aes_blocks);
+		debug_print_vector("AES-CMAC Src", AES_KEY_LENGTH, src);
+		debug_print_vector("AES-CMAC Xor", AES_KEY_LENGTH, tmp_data);
+		debug_print_vector("AES-CMAC Dst", AES_KEY_LENGTH, dst);
+
+		/* Update pointers for next loop. */
+		cbc_chain_data = dst;
+		src += AES_KEY_LENGTH;
+	}
+
+	debug_print_vector("AES-CMAC Hash", AES_KEY_LENGTH, dst);
+}
+
+/**
+ * Encrypt and sign a block of data (depending on security mode).
+ *
+ * \param key		Input AES key, length AES_KEY_LENGTH
+ * \param oper		Security operations mask to perform (enum security_op)
+ * \param src		Source data
+ * \param length	Size of source data
+ * \param sig_dst	Destination address for signature, AES_KEY_LENGTH bytes
+ */
+static int encrypt_and_sign(u8 *key, enum security_op oper, u8 *src,
+			    u32 length, u8 *sig_dst)
+{
+	u32 num_aes_blocks;
+	u8 key_schedule[AES_EXPAND_KEY_LENGTH];
+
+	debug("encrypt_and_sign: length = %d\n", length);
+	debug_print_vector("AES key", AES_KEY_LENGTH, key);
+
+	/*
+	 * The only need for a key is for signing/checksum purposes, so
+	 * if not encrypting, expand a key of 0s.
+	 */
+	aes_expand_key(oper & SECURITY_ENCRYPT ? key : zero_key, key_schedule);
+
+	num_aes_blocks = (length + AES_KEY_LENGTH - 1) / AES_KEY_LENGTH;
+
+	if (oper & SECURITY_ENCRYPT) {
+		/* Perform this in place, resulting in src being encrypted. */
+		debug("encrypt_and_sign: begin encryption\n");
+		encrypt_object(key_schedule, src, src, num_aes_blocks);
+		debug("encrypt_and_sign: end encryption\n");
+	}
+
+	if (oper & SECURITY_SIGN) {
+		/* encrypt the data, overwriting the result in signature. */
+		debug("encrypt_and_sign: begin signing\n");
+		sign_object(key, key_schedule, src, sig_dst, num_aes_blocks);
+		debug("encrypt_and_sign: end signing\n");
+	}
+
+	return 0;
+}
+
+int sign_data_block(u8 *source, unsigned length, u8 *signature)
+{
+	return encrypt_and_sign(zero_key, SECURITY_SIGN, source,
+				length, signature);
+}