diff options
| author | Jesse Taube <mr.bossman075@gmail.com> | 2024-02-01 10:00:04 -0500 |
|---|---|---|
| committer | Heinrich Schuchardt <heinrich.schuchardt@canonical.com> | 2024-02-12 17:35:34 +0100 |
| commit | 71b7bd86ed5511136ac78ba9d402e2af0d5924a4 (patch) | |
| tree | 86616e5e24ea5ef96e48fb3f31886d6776d0a047 | |
| parent | 91c37c4a20db24a4fc1d565c70035072d355cce0 (diff) | |
doc: imx: imxrt1170: Document imxrt1170-evk board
Add documentation for imxrt1170-evk.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Add index page entry, adjust formatting.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
| -rw-r--r-- | doc/board/nxp/imxrt1170-evk.rst | 50 | ||||
| -rw-r--r-- | doc/board/nxp/index.rst | 1 |
2 files changed, 51 insertions, 0 deletions
diff --git a/doc/board/nxp/imxrt1170-evk.rst b/doc/board/nxp/imxrt1170-evk.rst new file mode 100644 index 0000000000..86bd39ccb6 --- /dev/null +++ b/doc/board/nxp/imxrt1170-evk.rst @@ -0,0 +1,50 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +imxrt1170-evk +============= + +How to use U-Boot on NXP i.MXRT1170 EVK +--------------------------------------- + +- Build U-Boot for i.MXRT1170 EVK: + + .. code-block:: bash + + $ make mrproper + $ make imxrt1170-evk_defconfig + $ make + + This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the micro SD card: + + .. code-block:: bash + + $sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync + + This location is not compatible with GPT partioning. Please, use MBR + partitioning instead. + +- Flash the u-boot.img image into the micro SD card: + + .. code-block:: bash + + $sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync + +- Jumper settings + + .. list-table:: + :stub-columns: 1 + + * - SW1 + - 1 0 1 0 + * - SW2 + - 0 0 0 0 | 0 0 0 0 | 1 0 0 0 + + where 0 means bottom position and 1 means top position (from the + switch label numbers reference). + +- Connect the USB cable between the EVK and the PC for the console. + The USB console connector is the one close the ethernet connector + +- Insert the micro SD card in the board, power it up and U-Boot messages should come up. diff --git a/doc/board/nxp/index.rst b/doc/board/nxp/index.rst index 3bd9ed3c87..9468773054 100644 --- a/doc/board/nxp/index.rst +++ b/doc/board/nxp/index.rst @@ -14,6 +14,7 @@ NXP Semiconductors imx93_11x11_evk imxrt1020-evk imxrt1050-evk + imxrt1170-evk ls1046ardb mx6sabreauto mx6sabresd |