From d6b11fd1f0ef1b6cbc81ca7655c47bf68a16f32d Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 4 Apr 2014 15:25:03 +0900 Subject: powerpc: remove MBX and MBX860T boards support Enough time has passed since these boards were moved to Orphan. Remove. - Remove board/mbx8xx/* - Remove include/configs/{MBX.h,MBX860T.h} - Clean-up if defined(CONFIG_MBX) - Move the entries from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada --- include/common.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include/common.h') diff --git a/include/common.h b/include/common.h index cbd3c9e043..580615b9ef 100644 --- a/include/common.h +++ b/include/common.h @@ -511,13 +511,6 @@ void rpxclassic_init (void); void rpxlite_init (void); -#ifdef CONFIG_MBX -/* $(BOARD)/mbx8xx.c */ -void mbx_init (void); -void board_serial_init (void); -void board_ether_init (void); -#endif - #ifdef CONFIG_HERMES /* $(BOARD)/hermes.c */ void hermes_start_lxt980 (int speed); -- cgit v1.2.3 From 4fb3925ff8b64422eb904c630e914c29ed824e85 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 4 Apr 2014 15:25:06 +0900 Subject: powerpc: remove RPXClassic, RPXlite boards support Enough time has passed since these boards were moved to Orphan. Remove. - Remove board/RPXlite/* - Remove board/RPXClassic/* - Remove include/configs/RPXlite.h - Remove include/configs/RPXClassic.h - Clean-up defined(CONFIG_RPXCLASSIC) - Move the entry from boards.cfg to doc/README.scrapyard Signed-off-by: Masahiro Yamada --- arch/powerpc/cpu/mpc8xx/cpu_init.c | 5 - arch/powerpc/cpu/mpc8xx/scc.c | 7 - arch/powerpc/cpu/mpc8xx/serial.c | 2 +- board/RPXClassic/Makefile | 8 - board/RPXClassic/README | 19 - board/RPXClassic/RPXClassic.c | 260 ----------- board/RPXClassic/eccx.c | 335 -------------- board/RPXClassic/flash.c | 431 ------------------ board/RPXClassic/u-boot.lds | 82 ---- board/RPXClassic/u-boot.lds.debug | 121 ----- board/RPXlite/Makefile | 8 - board/RPXlite/README | 877 ------------------------------------- board/RPXlite/README.PlanetCore | 163 ------- board/RPXlite/RPXlite.c | 149 ------- board/RPXlite/flash.c | 508 --------------------- board/RPXlite/u-boot.lds | 82 ---- board/RPXlite/u-boot.lds.debug | 121 ----- boards.cfg | 2 - doc/README.scrapyard | 2 + drivers/pcmcia/mpc8xx_pcmcia.c | 2 +- drivers/pcmcia/rpx_pcmcia.c | 4 +- include/common.h | 4 - include/commproc.h | 35 -- include/configs/RPXClassic.h | 483 -------------------- include/configs/RPXlite.h | 395 ----------------- include/pcmcia.h | 2 +- post/cpu/mpc8xx/ether.c | 7 - post/cpu/mpc8xx/uart.c | 2 +- 28 files changed, 8 insertions(+), 4108 deletions(-) delete mode 100644 board/RPXClassic/Makefile delete mode 100644 board/RPXClassic/README delete mode 100644 board/RPXClassic/RPXClassic.c delete mode 100644 board/RPXClassic/eccx.c delete mode 100644 board/RPXClassic/flash.c delete mode 100644 board/RPXClassic/u-boot.lds delete mode 100644 board/RPXClassic/u-boot.lds.debug delete mode 100644 board/RPXlite/Makefile delete mode 100644 board/RPXlite/README delete mode 100644 board/RPXlite/README.PlanetCore delete mode 100644 board/RPXlite/RPXlite.c delete mode 100644 board/RPXlite/flash.c delete mode 100644 board/RPXlite/u-boot.lds delete mode 100644 board/RPXlite/u-boot.lds.debug delete mode 100644 include/configs/RPXClassic.h delete mode 100644 include/configs/RPXlite.h (limited to 'include/common.h') diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index 69455c7be0..9c3102dc69 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -138,7 +138,6 @@ void cpu_init_f (volatile immap_t * immr) defined(CONFIG_MHPC) || \ defined(CONFIG_R360MPI) || \ defined(CONFIG_RMU) || \ - defined(CONFIG_RPXCLASSIC) || \ defined(CONFIG_RPXLITE) || \ defined(CONFIG_SPC1920) || \ defined(CONFIG_SPD823TS) @@ -207,10 +206,6 @@ void cpu_init_f (volatile immap_t * immr) __asm__ ("eieio"); } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG); -#ifdef CONFIG_RPXCLASSIC - rpxclassic_init (); -#endif - #if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM) rpxlite_init (); #endif diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c index 647f05817b..5da697366d 100644 --- a/arch/powerpc/cpu/mpc8xx/scc.c +++ b/arch/powerpc/cpu/mpc8xx/scc.c @@ -461,11 +461,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) #error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined #endif -#ifdef CONFIG_RPXCLASSIC - *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK; - *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX); -#endif - #ifdef CONFIG_RPXLITE *((uchar *) BCSR0) |= BCSR0_ETHEN; #endif @@ -512,8 +507,6 @@ static int scc_init (struct eth_device *dev, bd_t * bis) */ #if defined (CONFIG_FADS) udelay (10000); /* wait 10 ms */ -#elif defined(CONFIG_RPXCLASSIC) - udelay (100000); /* wait 100 ms */ #endif return 1; diff --git a/arch/powerpc/cpu/mpc8xx/serial.c b/arch/powerpc/cpu/mpc8xx/serial.c index f7ca11e394..932141144c 100644 --- a/arch/powerpc/cpu/mpc8xx/serial.c +++ b/arch/powerpc/cpu/mpc8xx/serial.c @@ -182,7 +182,7 @@ static int smc_init (void) #endif #endif /* CONFIG_FADS */ -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) +#if defined(CONFIG_RPXLITE) /* Enable Monitor Port Transceiver */ *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ; #endif /* CONFIG_RPXLITE */ diff --git a/board/RPXClassic/Makefile b/board/RPXClassic/Makefile deleted file mode 100644 index 87db754faa..0000000000 --- a/board/RPXClassic/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = RPXClassic.o flash.o eccx.o diff --git a/board/RPXClassic/README b/board/RPXClassic/README deleted file mode 100644 index e03f670d1c..0000000000 --- a/board/RPXClassic/README +++ /dev/null @@ -1,19 +0,0 @@ -# Porting U-Boot onto RPXClassic LF_BW31 board -# Written by Pierre AUBERT -# E-Mail p.aubert@staubli.com -# Stäubli Faverges - -# -# Sept. 20 2001 -# -# Cross compile: Montavista Hardhat ported on HP-UX 10.20 -# - -Flash memories : AM29DL323B (2 banks flash memories) 16 Mb from 0xff000000 -DRAM : 16 Mb from 0 -NVRAM : 512 kb from 0xfa000000 - - -- environment is stored in NVRAM -- Mac address is read from EEPROM -- ethernet on SCC1 or fast ethernet on FEC are running (depending on the - configuration flag CONFIG_FEC_ENET) diff --git a/board/RPXClassic/RPXClassic.c b/board/RPXClassic/RPXClassic.c deleted file mode 100644 index 15b7232fd7..0000000000 --- a/board/RPXClassic/RPXClassic.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * (C) Copyright 2001 - * Stäubli Faverges - - * Pierre AUBERT p.aubert@staubli.com - * U-Boot port on RPXClassic LF (CLLF_BW31) board - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); -static unsigned char aschex_to_byte (unsigned char *cp); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFCC25 - -const uint sdram_table[] = -{ - /* - * Single Read. (Offset 00h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08, - 0x3FBFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Read. (Offset 08h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88, - 0x3FBFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Single Write. (Offset 18h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00, - 0x3FFFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Write. (Offset 20h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C, - 0x0CFFCC00, 0x33FFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* - * Refresh. (Offset 30h in UPMA RAM) - */ - 0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24, - 0x3FFFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Exception. (Offset 3Ch in UPMA RAM) - */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_ -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - puts ("Board: RPXClassic\n"); - return (0); -} - -/*----------------------------------------------------------------------------- - * board_get_enetaddr -- Read the MAC Address in the I2C EEPROM - *----------------------------------------------------------------------------- - */ -static void board_get_enetaddr(uchar *enet) -{ - int i; - char buff[256], *cp; - - /* Initialize I2C */ - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - /* Read 256 bytes in EEPROM */ - i2c_read (0x54, 0, 1, (uchar *)buff, 128); - i2c_read (0x54, 128, 1, (uchar *)buff + 128, 128); - - /* Retrieve MAC address in buffer (key EA) */ - for (cp = buff;;) { - if (cp[0] == 'E' && cp[1] == 'A') { - cp += 3; - /* Read MAC address */ - for (i = 0; i < 6; i++, cp += 2) { - enet[i] = aschex_to_byte ((unsigned char *)cp); - } - } - /* Scan to the end of the record */ - while ((*cp != '\n') && (*cp != (char)0xff)) { - cp++; - } - /* If the next character is a \n, 0 or ff, we are done. */ - cp++; - if ((*cp == '\n') || (*cp == 0) || (*cp == (char)0xff)) - break; - } - -#ifdef CONFIG_FEC_ENET - /* The MAC address is the same as normal ethernet except the 3rd byte */ - /* (See the E.P. Planet Core Overview manual */ - enet[3] |= 0x80; -#endif - - printf("MAC address = %pM\n", enet); -} - -int misc_init_r(void) -{ - uchar enetaddr[6]; - - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(enetaddr); - eth_setenv_enetaddr("ethaddr", enetaddr); - } - - return 0; -} - -void rpxclassic_init (void) -{ - /* Enable NVRAM */ - *((uchar *) BCSR0) |= BCSR0_ENNVRAM; - -#ifdef CONFIG_FEC_ENET - - /* Validate the fast ethernet tranceiver */ - *((volatile uchar *) BCSR2) &= ~BCSR2_MIICTL; - *((volatile uchar *) BCSR2) &= ~BCSR2_MIIPWRDWN; - *((volatile uchar *) BCSR2) |= BCSR2_MIIRST; - *((volatile uchar *) BCSR2) |= BCSR2_MIIPWRDWN; -#endif - -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size10; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* Refresh clock prescalar */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - memctl->memc_mar = 0x00000000; - - /* Map controller banks 1 to the SDRAM bank */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - refresh twice */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* Check Bank 0 Memory Size - * try 10 column mode - */ - - size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM, - SDRAM_MAX_SIZE); - - return (size10); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size(base, maxsize)); -} -/*----------------------------------------------------------------------------- - * aschex_to_byte -- - *----------------------------------------------------------------------------- - */ -static unsigned char aschex_to_byte (unsigned char *cp) -{ - u_char byte, c; - - c = *cp++; - - if ((c >= 'A') && (c <= 'F')) { - c -= 'A'; - c += 10; - } else if ((c >= 'a') && (c <= 'f')) { - c -= 'a'; - c += 10; - } else { - c -= '0'; - } - - byte = c * 16; - - c = *cp; - - if ((c >= 'A') && (c <= 'F')) { - c -= 'A'; - c += 10; - } else if ((c >= 'a') && (c <= 'f')) { - c -= 'a'; - c += 10; - } else { - c -= '0'; - } - - byte += c; - - return (byte); -} diff --git a/board/RPXClassic/eccx.c b/board/RPXClassic/eccx.c deleted file mode 100644 index 766a19eb1e..0000000000 --- a/board/RPXClassic/eccx.c +++ /dev/null @@ -1,335 +0,0 @@ -/* - * (C) Copyright 2002 - * Stäubli Faverges - - * Pierre AUBERT p.aubert@staubli.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* Video support for the ECCX daughter board */ - - -#include -#include - -#ifdef CONFIG_VIDEO_SED13806 -#include - - -/* Screen configurations: the initialization of the SD13806 depends on - screen and on display mode. We handle only 8bpp and 16 bpp modes */ - -/* ECCX board is supplied with a NEC NL6448BC20 screen */ -#ifdef CONFIG_NEC_NL6448BC20 -#define DISPLAY_WIDTH 640 -#define DISPLAY_HEIGHT 480 - -#ifdef CONFIG_VIDEO_SED13806_8BPP -static const S1D_REGS init_regs [] = -{ - {0x0001,0x00}, /* Miscellaneous Register */ - {0x01FC,0x00}, /* Display Mode Register */ - {0x0004,0x1b}, /* General IO Pins Configuration Register 0 */ - {0x0005,0x00}, /* General IO Pins Configuration Register 1 */ - {0x0008,0xe5}, /* General IO Pins Control Register 0 */ - {0x0009,0x1f}, /* General IO Pins Control Register 1 */ - {0x0010,0x02}, /* Memory Clock Configuration Register */ - {0x0014,0x10}, /* LCD Pixel Clock Configuration Register */ - {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */ - {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ - {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ - {0x0021,0x04}, /* DRAM Refresh Rate Register */ - {0x002A,0x00}, /* DRAM Timings Control Register 0 */ - {0x002B,0x01}, /* DRAM Timings Control Register 1 */ - {0x0020,0x80}, /* Memory Configuration Register */ - {0x0030,0x25}, /* Panel Type Register */ - {0x0031,0x00}, /* MOD Rate Register */ - {0x0032,0x4F}, /* LCD Horizontal Display Width Register */ - {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */ - {0x0035,0x01}, /* TFT FPLINE Start Position Register */ - {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ - {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */ - {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */ - {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */ - {0x003B,0x00}, /* TFT FPFRAME Start Position Register */ - {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ - {0x0040,0x03}, /* LCD Display Mode Register */ - {0x0041,0x02}, /* LCD Miscellaneous Register */ - {0x0042,0x00}, /* LCD Display Start Address Register 0 */ - {0x0043,0x00}, /* LCD Display Start Address Register 1 */ - {0x0044,0x00}, /* LCD Display Start Address Register 2 */ - {0x0046,0x40}, /* LCD Memory Address Offset Register 0 */ - {0x0047,0x01}, /* LCD Memory Address Offset Register 1 */ - {0x0048,0x00}, /* LCD Pixel Panning Register */ - {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ - {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ - {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ - {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ - {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ - {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ - {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ - {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ - {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ - {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ - {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ - {0x005B,0x00}, /* TV Output Control Register */ - {0x0060,0x03}, /* CRT/TV Display Mode Register */ - {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ - {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ - {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ - {0x0066,0x40}, /* CRT/TV Memory Address Offset Register 0 */ - {0x0067,0x01}, /* CRT/TV Memory Address Offset Register 1 */ - {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ - {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ - {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ - {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ - {0x0071,0x00}, /* LCD Ink/Cursor Start Address Register */ - {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ - {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ - {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ - {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ - {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ - {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ - {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ - {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ - {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ - {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ - {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ - {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ - {0x0081,0x00}, /* CRT/TV Ink/Cursor Start Address Register */ - {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ - {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ - {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ - {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ - {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ - {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ - {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ - {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ - {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ - {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ - {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ - {0x0100,0x00}, /* BitBlt Control Register 0 */ - {0x0101,0x00}, /* BitBlt Control Register 1 */ - {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ - {0x0103,0x00}, /* BitBlt Operation Register */ - {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ - {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ - {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ - {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ - {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ - {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ - {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ - {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ - {0x0110,0x00}, /* BitBlt Width Register 0 */ - {0x0111,0x00}, /* BitBlt Width Register 1 */ - {0x0112,0x00}, /* BitBlt Height Register 0 */ - {0x0113,0x00}, /* BitBlt Height Register 1 */ - {0x0114,0x00}, /* BitBlt Background Color Register 0 */ - {0x0115,0x00}, /* BitBlt Background Color Register 1 */ - {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ - {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ - {0x01E0,0x00}, /* Look-Up Table Mode Register */ - {0x01E2,0x00}, /* Look-Up Table Address Register */ - {0x01E4,0x00}, /* Look-Up Table Data Register */ - {0x01F0,0x10}, /* Power Save Configuration Register */ - {0x01F1,0x00}, /* Power Save Status Register */ - {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ - {0x01FC,0x01}, /* Display Mode Register */ - {0, 0} -}; -#endif /* CONFIG_VIDEO_SED13806_8BPP */ - -#ifdef CONFIG_VIDEO_SED13806_16BPP - -static const S1D_REGS init_regs [] = -{ - {0x0001,0x00}, /* Miscellaneous Register */ - {0x01FC,0x00}, /* Display Mode Register */ - {0x0004,0x1b}, /* General IO Pins Configuration Register 0 */ - {0x0005,0x00}, /* General IO Pins Configuration Register 1 */ - {0x0008,0xe5}, /* General IO Pins Control Register 0 */ - {0x0009,0x1f}, /* General IO Pins Control Register 1 */ - {0x0010,0x02}, /* Memory Clock Configuration Register */ - {0x0014,0x10}, /* LCD Pixel Clock Configuration Register */ - {0x0018,0x02}, /* CRT/TV Pixel Clock Configuration Register */ - {0x001C,0x02}, /* MediaPlug Clock Configuration Register */ - {0x001E,0x01}, /* CPU To Memory Wait State Select Register */ - {0x0021,0x04}, /* DRAM Refresh Rate Register */ - {0x002A,0x00}, /* DRAM Timings Control Register 0 */ - {0x002B,0x01}, /* DRAM Timings Control Register 1 */ - {0x0020,0x80}, /* Memory Configuration Register */ - {0x0030,0x25}, /* Panel Type Register */ - {0x0031,0x00}, /* MOD Rate Register */ - {0x0032,0x4F}, /* LCD Horizontal Display Width Register */ - {0x0034,0x13}, /* LCD Horizontal Non-Display Period Register */ - {0x0035,0x01}, /* TFT FPLINE Start Position Register */ - {0x0036,0x0B}, /* TFT FPLINE Pulse Width Register */ - {0x0038,0xDF}, /* LCD Vertical Display Height Register 0 */ - {0x0039,0x01}, /* LCD Vertical Display Height Register 1 */ - {0x003A,0x2C}, /* LCD Vertical Non-Display Period Register */ - {0x003B,0x00}, /* TFT FPFRAME Start Position Register */ - {0x003C,0x01}, /* TFT FPFRAME Pulse Width Register */ - {0x0040,0x05}, /* LCD Display Mode Register */ - {0x0041,0x02}, /* LCD Miscellaneous Register */ - {0x0042,0x00}, /* LCD Display Start Address Register 0 */ - {0x0043,0x00}, /* LCD Display Start Address Register 1 */ - {0x0044,0x00}, /* LCD Display Start Address Register 2 */ - {0x0046,0x80}, /* LCD Memory Address Offset Register 0 */ - {0x0047,0x02}, /* LCD Memory Address Offset Register 1 */ - {0x0048,0x00}, /* LCD Pixel Panning Register */ - {0x004A,0x00}, /* LCD Display FIFO High Threshold Control Register */ - {0x004B,0x00}, /* LCD Display FIFO Low Threshold Control Register */ - {0x0050,0x4F}, /* CRT/TV Horizontal Display Width Register */ - {0x0052,0x13}, /* CRT/TV Horizontal Non-Display Period Register */ - {0x0053,0x01}, /* CRT/TV HRTC Start Position Register */ - {0x0054,0x0B}, /* CRT/TV HRTC Pulse Width Register */ - {0x0056,0xDF}, /* CRT/TV Vertical Display Height Register 0 */ - {0x0057,0x01}, /* CRT/TV Vertical Display Height Register 1 */ - {0x0058,0x2B}, /* CRT/TV Vertical Non-Display Period Register */ - {0x0059,0x09}, /* CRT/TV VRTC Start Position Register */ - {0x005A,0x01}, /* CRT/TV VRTC Pulse Width Register */ - {0x005B,0x00}, /* TV Output Control Register */ - {0x0060,0x05}, /* CRT/TV Display Mode Register */ - {0x0062,0x00}, /* CRT/TV Display Start Address Register 0 */ - {0x0063,0x00}, /* CRT/TV Display Start Address Register 1 */ - {0x0064,0x00}, /* CRT/TV Display Start Address Register 2 */ - {0x0066,0x80}, /* CRT/TV Memory Address Offset Register 0 */ - {0x0067,0x02}, /* CRT/TV Memory Address Offset Register 1 */ - {0x0068,0x00}, /* CRT/TV Pixel Panning Register */ - {0x006A,0x00}, /* CRT/TV Display FIFO High Threshold Control Register */ - {0x006B,0x00}, /* CRT/TV Display FIFO Low Threshold Control Register */ - {0x0070,0x00}, /* LCD Ink/Cursor Control Register */ - {0x0071,0x00}, /* LCD Ink/Cursor Start Address Register */ - {0x0072,0x00}, /* LCD Cursor X Position Register 0 */ - {0x0073,0x00}, /* LCD Cursor X Position Register 1 */ - {0x0074,0x00}, /* LCD Cursor Y Position Register 0 */ - {0x0075,0x00}, /* LCD Cursor Y Position Register 1 */ - {0x0076,0x00}, /* LCD Ink/Cursor Blue Color 0 Register */ - {0x0077,0x00}, /* LCD Ink/Cursor Green Color 0 Register */ - {0x0078,0x00}, /* LCD Ink/Cursor Red Color 0 Register */ - {0x007A,0x1F}, /* LCD Ink/Cursor Blue Color 1 Register */ - {0x007B,0x3F}, /* LCD Ink/Cursor Green Color 1 Register */ - {0x007C,0x1F}, /* LCD Ink/Cursor Red Color 1 Register */ - {0x007E,0x00}, /* LCD Ink/Cursor FIFO Threshold Register */ - {0x0080,0x00}, /* CRT/TV Ink/Cursor Control Register */ - {0x0081,0x00}, /* CRT/TV Ink/Cursor Start Address Register */ - {0x0082,0x00}, /* CRT/TV Cursor X Position Register 0 */ - {0x0083,0x00}, /* CRT/TV Cursor X Position Register 1 */ - {0x0084,0x00}, /* CRT/TV Cursor Y Position Register 0 */ - {0x0085,0x00}, /* CRT/TV Cursor Y Position Register 1 */ - {0x0086,0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register */ - {0x0087,0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register */ - {0x0088,0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register */ - {0x008A,0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register */ - {0x008B,0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register */ - {0x008C,0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register */ - {0x008E,0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register */ - {0x0100,0x00}, /* BitBlt Control Register 0 */ - {0x0101,0x00}, /* BitBlt Control Register 1 */ - {0x0102,0x00}, /* BitBlt ROP Code/Color Expansion Register */ - {0x0103,0x00}, /* BitBlt Operation Register */ - {0x0104,0x00}, /* BitBlt Source Start Address Register 0 */ - {0x0105,0x00}, /* BitBlt Source Start Address Register 1 */ - {0x0106,0x00}, /* BitBlt Source Start Address Register 2 */ - {0x0108,0x00}, /* BitBlt Destination Start Address Register 0 */ - {0x0109,0x00}, /* BitBlt Destination Start Address Register 1 */ - {0x010A,0x00}, /* BitBlt Destination Start Address Register 2 */ - {0x010C,0x00}, /* BitBlt Memory Address Offset Register 0 */ - {0x010D,0x00}, /* BitBlt Memory Address Offset Register 1 */ - {0x0110,0x00}, /* BitBlt Width Register 0 */ - {0x0111,0x00}, /* BitBlt Width Register 1 */ - {0x0112,0x00}, /* BitBlt Height Register 0 */ - {0x0113,0x00}, /* BitBlt Height Register 1 */ - {0x0114,0x00}, /* BitBlt Background Color Register 0 */ - {0x0115,0x00}, /* BitBlt Background Color Register 1 */ - {0x0118,0x00}, /* BitBlt Foreground Color Register 0 */ - {0x0119,0x00}, /* BitBlt Foreground Color Register 1 */ - {0x01E0,0x01}, /* Look-Up Table Mode Register */ - {0x01E2,0x00}, /* Look-Up Table Address Register */ - {0x01E4,0x00}, /* Look-Up Table Data Register */ - {0x01F0,0x10}, /* Power Save Configuration Register */ - {0x01F1,0x00}, /* Power Save Status Register */ - {0x01F4,0x00}, /* CPU-to-Memory Access Watchdog Timer Register */ - {0x01FC,0x01}, /* Display Mode Register */ - {0, 0} -}; - -#endif /* CONFIG_VIDEO_SED13806_16BPP */ -#endif /* CONFIG_NEC_NL6448BC20 */ - - -#ifdef CONFIG_CONSOLE_EXTRA_INFO - -/*----------------------------------------------------------------------------- - * video_get_info_str -- setup a board string: type, speed, etc. - * line_number= location to place info string beside logo - * info= buffer for info string - *----------------------------------------------------------------------------- - */ -void video_get_info_str (int line_number, char *info) -{ - if (line_number == 1) { - strcpy (info, " RPXClassic board"); - } - else { - info [0] = '\0'; - } - -} -#endif - -/*----------------------------------------------------------------------------- - * board_video_init -- init de l'EPSON, config du CS - *----------------------------------------------------------------------------- - */ -unsigned int board_video_init (void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - /* Program ECCX registers */ - *(ECCX_CSR12) |= ECCX_860; - *(ECCX_CSR8) |= ECCX_BE | ECCX_CS2; - *(ECCX_CSR8) |= ECCX_ENEPSON; - - memctl->memc_or2 = SED13806_OR; - memctl->memc_br2 = SED13806_REG_ADDR | SED13806_ACCES; - - return (SED13806_REG_ADDR); -} - -/*----------------------------------------------------------------------------- - * board_validate_screen -- - *----------------------------------------------------------------------------- - */ -void board_validate_screen (unsigned int base) -{ - /* Activate the panel bias power */ - *(volatile unsigned char *)(base + REG_GPIO_CTRL) = 0x80; -} -/*----------------------------------------------------------------------------- - * board_get_regs -- - *----------------------------------------------------------------------------- - */ -const S1D_REGS *board_get_regs (void) -{ - return (init_regs); -} -/*----------------------------------------------------------------------------- - * board_get_width -- - *----------------------------------------------------------------------------- - */ -int board_get_width (void) -{ - return (DISPLAY_WIDTH); -} - -/*----------------------------------------------------------------------------- - * board_get_height -- - *----------------------------------------------------------------------------- - */ -int board_get_height (void) -{ - return (DISPLAY_HEIGHT); -} - -#endif /* CONFIG_VIDEO_SED13806 */ diff --git a/board/RPXClassic/flash.c b/board/RPXClassic/flash.c deleted file mode 100644 index 97ffa68aa2..0000000000 --- a/board/RPXClassic/flash.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * (C) Copyright 2001 - * Stäubli Faverges - - * Pierre AUBERT p.aubert@staubli.com - * U-Boot port on RPXClassic LF (CLLF_BW31) board - * - * RPXClassic uses Am29DL323B flash memory with 2 banks - * - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long size_b0 ; - int i; - - /* Init: no FLASHes known */ - for (i=0; i= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - flash_info[0].size = size_b0; - - return (size_b0); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x00010000; - info->start[3] = base + 0x00018000; - info->start[4] = base + 0x00020000; - info->start[5] = base + 0x00028000; - info->start[6] = base + 0x00030000; - info->start[7] = base + 0x00038000; - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i-7) * 0x00040000) ; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AMDL323B: - printf ("AMDL323DB (16 Mbytes, bottom boot sect)\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Reset flash componeny */ - addr [0] = 0xf0f0f0f0; - - /* Write auto select command: read Manufacturer ID */ - addr[0xAAA] = 0xAAAAAAAA ; - addr[0x555] = 0x55555555 ; - addr[0xAAA] = 0x90909090 ; - - value = addr[0] ; - - switch (value & 0x00FF00FF) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[2] ; /* device ID */ - - switch (value & 0x00FF00FF) { - case (AMD_ID_DL323B & 0x00FF00FF): - info->flash_id += FLASH_AMDL323B; - info->sector_count = 71; - info->size = 0x01000000; /* 16 Mb */ - - break; - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - /* set up sector start address table */ - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00008000; - info->start[2] = base + 0x00010000; - info->start[3] = base + 0x00018000; - info->start[4] = base + 0x00020000; - info->start[5] = base + 0x00028000; - info->start[6] = base + 0x00030000; - info->start[7] = base + 0x00038000; - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i-7) * 0x00040000) ; - } - - /* check for protected sectors */ - for (i = 0; i < 23; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[4] & 1 ; - } - /* Check for protected sectors in the 2nd bank */ - addr[0x100AAA] = 0xAAAAAAAA ; - addr[0x100555] = 0x55555555 ; - addr[0x100AAA] = 0x90909090 ; - - for (i = 23; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[4] & 1 ; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0xF0F0F0F0; /* reset bank 1 */ - addr = (volatile unsigned long *)info->start[23]; - - *addr = 0xF0F0F0F0; /* reset bank 2 */ - - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0x80808080; - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long *)(info->start[sect]) ; - addr[0] = 0x30303030 ; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long *)(info->start[l_sect]); - while ((addr[0] & 0x80808080) != 0x80808080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_long *)info->start[0]; - addr[0] = 0xF0F0F0F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0xA0A0A0A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds deleted file mode 100644 index 0eb2fba00c..0000000000 --- a/board/RPXClassic/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug deleted file mode 100644 index b9c84c77d6..0000000000 --- a/board/RPXClassic/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/RPXlite/Makefile b/board/RPXlite/Makefile deleted file mode 100644 index c17cbacf32..0000000000 --- a/board/RPXlite/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = RPXlite.o flash.o diff --git a/board/RPXlite/README b/board/RPXlite/README deleted file mode 100644 index 3ca671126d..0000000000 --- a/board/RPXlite/README +++ /dev/null @@ -1,877 +0,0 @@ -# Porting U-Boot onto RPXlite board -# Written by Yoo. Jonghoon -# E-Mail : yooth@ipone.co.kr -# IP ONE Inc. - -# Since 2001. 1. 29 - -# Shell : bash -# Cross-compile tools : Montavista Hardhat -# Debugging tools : Windriver VisionProbe (PowerPC BDM) -# ppcboot ver. : ppcboot-0.8.1 - -############################################################### -# 1. Hardware setting -############################################################### - -1.1. Board, BDM settings - Install board, BDM, connect each other - -1.2. Save Register value - Boot with board-on monitor program and save the - register values with BDM. - -1.3. Configure flash programmer - Check flash memory area in the memory map. - 0xFFC00000 - 0xFFFFFFFF - - Boot monitor program is at - 0xFFF00000 - - You can program on-board flash memory with VisionClick - flash programmer. Set the target flash device as: - - 29DL800B - - (?) The flash memory device in the board *is* 29LV800B, - but I cannot program it with '29LV800B' option. - (in VisionClick flash programming tools) - I don't know why... - -1.4. Save boot monitor program *IMPORTANT* - Upload boot monitor program from board to file. - boot monitor program starts at 0xFFF00000 - -1.5. Test flash memory programming - Try to erase boot program in the flash memory, - and re-write them. - *WARNING* YOU MUST SAVE BOOT PROGRAM TO FILE - BEFORE ERASING FLASH - -############################################################### -# 2. U-Boot setting -############################################################### - -2.1. Download U-Boot tarball at - ftp://ftp.denx.de - (The latest version is ppcboot-0.8.1.tar.bz2) - - To extract the archive use the following syntax : - > bzip2 -cd ppcboot-0.8.1.tar.bz2 | tar xf - - -2.2. Add the following lines in '.profile' - export PATH=$PATH:/opt/hardhat/devkit/ppc/8xx/bin - -2.3. Make board specific config, for example: - > cd ppcboot-0.8.1 - > make TQM860L_config - - Now we can build ppcboot bin files. - After make all, you must see these files in your - ppcboot root directory. - - ppcboot - ppcboot.bin - ppcboot.srec - ppcboot.map - -2.4. Make your own board directory into the - ppcboot-0.8.1/board - and make your board-specific files here. - - For exmanple, tqm8xx files are composed of - .depend : Nothing - Makefile : To make config file - config.mk : Sets base address - flash.c : Flash memory control files - ppcboot.lds : linker(ld) script? (I don't know this yet) - tqm8xx.c : DRAM control and board check routines - - And, add your board config lines in the - ppcboot-0.8.1/Makefile - - Finally, add config_(your board).h file in the - ppcboot-0.8.1/include/ - - I've made board/rpxlite directory, and just copied - tqm8xx settings for now. - - Rebuild ppcboot for rpxlite board: - > make rpxlite_config - > make - -############################################################### -# 3. U-Boot porting -############################################################### - -3.1. My RPXlite files are based on tqm8xx board files. - > cd board - > cp -r tqm8xx RPXLITE - > cd RPXLITE - > mv tqm8xx.c RPXLITE.c - > cd ../../include - > cp config_tqm8xx.h config_RPXLITE.h - -3.2. Modified files are: - board/RPXLITE/RPXLITE.c /* DRAM-related routines */ - board/RPXLITE/flash.c /* flash-related routines */ - board/RPXLITE/config.mk /* set text base address */ - arch/powerpc/cpu/mpc8xx/serial.c /* board specific register setting */ - include/config_RPXLITE.h /* board specific registers */ - - See 'reg_config.txt' for register values in detail. - -############################################################### -# 4. Running Linux -############################################################### - - -############################################################### -# Misc Information -############################################################### - -mem_config.txt: -=============== - -Flash memory device : AM29LV800BB (1Mx8Bit) x 4 device -manufacturer id : 01 (AMD) -device id : 5B (AM29LV800B) -size : 4Mbyte -sector # : 19 - -Sector information : - -number start addr. size -00 FFC0_0000 64 -01 FFC1_0000 32 -02 FFC1_8000 32 -03 FFC2_0000 128 -04 FFC4_0000 256 -05 FFC8_0000 256 -06 FFCC_0000 256 -07 FFD0_0000 256 -08 FFD4_0000 256 -09 FFD8_0000 256 -10 FFDC_0000 256 -11 FFE0_0000 256 -12 FFE4_0000 256 -13 FFE8_0000 256 -14 FFEC_0000 256 -15 FFF0_0000 256 -16 FFF4_0000 256 -17 FFF8_0000 256 -18 FFFC_0000 256 - - -reg_config.txt: -=============== - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* SIU (System Interface Unit) */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ - - -/*### IMMR */ -/*### Internal Memory Map Register */ -/*### Chap. 11.4.1 */ - - ISB = 0xFA20 /* Set the Immap base = 0xFA20 0000 */ - PARTNUM = 0x21 - MASKNUM = 0x00 - - => 0xFA20 2100 - ---------------------------------------------------------------------- - -/*### SIUMCR */ -/*### SIU Module Configuration Register */ -/*### Chap. 11.4.2 */ -/*### Offset : 0x0000 0000 */ - - EARB = 0 - EARP = 0 - DSHW = 0 - DBGC = 0 - DBPC = 0 - FRC = 0 - DLK = 0 - OPAR = 0 - PNCS = 0 - DPC = 0 - MPRE = 0 - MLRC = 10 /* ~KR/~RETRY/~IRQ4/SPKROUT functions as ~KR/~TRTRY */ - AEME = 0 - SEME = 0 - BSC = 0 - GB5E = 0 - B2DD = 0 - B3DD = 0 - - => 0x0000 0800 - ---------------------------------------------------------------------- - -/*### SYPCR */ -/*### System Protection Control Register */ -/*### Chap. 11.4.3 */ -/*### Offset : 0x0000 0004 */ - - SWTC = 0xFFFF /* SW watchdog timer count = 0xFFFF */ - BMT = 0x06 /* BUS monitoring timing */ - BME = 1 /* BUS monitor enable */ - SWF = 1 - SWE = 0 /* SW watchdog disable */ - SWRI = 0 - SWP = 1 - - => 0xFFFF 0689 - ---------------------------------------------------------------------- - -/*### TESR */ -/*### Transfer Error Status Register */ -/*### Chap. 11.4.4 */ -/*### Offset : 0x0000 0020 */ - - IEXT = 0 - ITMT = 0 - IPB = 0000 - DEXT = 0 - DTMT = 0 - DPB = 0000 - - => 0x0000 0000 - ---------------------------------------------------------------------- - -/*### SIPEND */ -/*### SIU Interrupt Pending Register */ -/*### Chap. 11.5.4.1 */ -/*### Offset : 0x0000 0010 */ - - IRQ0~IRQ7 = 0 - LVL0~LVL7 = 0 - - => 0x0000 0000 - ---------------------------------------------------------------------- - -/*### SIMASK */ -/*### SIU Interrupt Mask Register */ -/*### Chap. 11.5.4.2 */ -/*### Offset : 0x0000 0014 */ - - IRM0~IRM7 = 0 /* Mask all interrupts */ - LVL0~LVL7 = 0 - - => 0x0000 0000 - ---------------------------------------------------------------------- - -/*### SIEL */ -/*### SIU Interrupt Edge/Level Register */ -/*### Chap. 11.5.4.3 */ -/*### Offset : 0x0000 0018 */ - - ED0~ED7 = 0 /* Low level triggered */ - WMn0~WMn7 = 0 /* Not allowed to exit from low-power mode */ - - => 0x0000 0000 - ---------------------------------------------------------------------- - -/*### SIVEC */ -/*### SIU Interrupt Vector Register */ -/*### Chap. 11.5.4.4 */ -/*### Offset : 0x0000 001C */ - - INTC = 3C /* The lowest interrupt is pending..(?) */ - - => 0x3C00 0000 - ---------------------------------------------------------------------- - -/*### SWSR */ -/*### Software Service Register */ -/*### Chap. 11.7.1 */ -/*### Offset : 0x0000 001E */ - - SEQ = 0 - - => 0x0000 - ---------------------------------------------------------------------- - -/*### SDCR */ -/*### SDMA Configuration Register */ -/*### Chap. 20.2.1 */ -/*### Offset : 0x0000 0032 */ - - FRZ = 0 - RAID = 01 /* Priority level 5 (BR5) (normal operation) */ - - => 0x0000 0001 - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* UPMA (User Programmable Machine A) */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ - -/*### Chap. 16.6.4.1 */ -/*### Offset = 0x0000 017c */ - - T0 = CFFF CC24 /* Single Read */ - T1 = 0FFF CC04 - T2 = 0CAF CC04 - T3 = 03AF CC08 - T4 = 3FBF CC27 /* last */ - T5 = FFFF CC25 - T6 = FFFF CC25 - T7 = FFFF CC25 - T8 = CFFF CC24 /* Burst Read */ - T9 = 0FFF CC04 - T10 = 0CAF CC84 - T11 = 03AF CC88 - T12 = 3FBF CC27 /* last */ - T13 = FFFF CC25 - T14 = FFFF CC25 - T15 = FFFF CC25 - T16 = FFFF CC25 - T17 = FFFF CC25 - T18 = FFFF CC25 - T19 = FFFF CC25 - T20 = FFFF CC25 - T21 = FFFF CC25 - T22 = FFFF CC25 - T23 = FFFF CC25 - T24 = CFFF CC24 /* Single Write */ - T25 = 0FFF CC04 - T26 = 0CFF CC04 - T27 = 03FF CC00 - T28 = 3FFF CC27 /* last */ - T29 = FFFF CC25 - T30 = FFFF CC25 - T31 = FFFF CC25 - T32 = CFFF CC24 /* Burst Write */ - T33 = 0FFF CC04 - T34 = 0CFF CC80 - T35 = 03FF CC8C - T36 = 0CFF CC00 - T37 = 33FF CC27 /* last */ - T38 = FFFF CC25 - T39 = FFFF CC25 - T40 = FFFF CC25 - T41 = FFFF CC25 - T42 = FFFF CC25 - T43 = FFFF CC25 - T44 = FFFF CC25 - T45 = FFFF CC25 - T46 = FFFF CC25 - T47 = FFFF CC25 - T48 = C0FF CC24 /* Refresh */ - T49 = 03FF CC24 - T50 = 0FFF CC24 - T51 = 0FFF CC24 - T52 = 3FFF CC27 /* last */ - T53 = FFFF CC25 - T54 = FFFF CC25 - T55 = FFFF CC25 - T56 = FFFF CC25 - T57 = FFFF CC25 - T58 = FFFF CC25 - T59 = FFFF CC25 - T60 = FFFF CC25 /* Exception */ - T61 = FFFF CC25 - T62 = FFFF CC25 - T63 = FFFF CC25 - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* UPMB */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - -/*### Chap. 16.6.4.1 */ - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* MEMC */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - -/*### BR0 & OR0 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR0(0x0000 0100) & OR0(0x0000 0104) */ -/*### Flash memory */ - - BA = 1111 1110 0000 0000 0 /* Base addr = 0xFE00 0000 */ - AT = 000 - PS = 00 - PARE = 0 - WP = 0 - MS = 0 /* GPCM */ - V = 1 /* Valid */ - - => 0xFE00 0001 - - AM = 1111 1110 0000 0000 0 /* 32MBytes */ - ATM = 000 - CSNT/SAM = 0 - ACS/G5LA,G5LS = 00 - BIH = 1 /* Burst inhibited */ - SCY = 0100 /* cycle length = 4 */ - SETA = 0 - TRLX = 0 - EHTR = 0 - - => 0xFE00 0140 - -/*### BR1 & OR1 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR1(0x0000 0108) & OR1(0x0000 010C) */ -/*### SDRAM */ - - BA = 0000 0000 0000 0000 0 /* Base addr = 0x0000 0000 */ - AT = 000 - PS = 00 - PARE = 0 - WP = 0 - MS = 1 /* UPMA */ - V = 1 /* Valid */ - - => 0x0000 0081 - - AM = 1111 1110 0000 0000 /* 32MBytes */ - ATM = 000 - CSNT/SAM = 1 - ACS/G5LA,G5LS = 11 - BIH = 0 - SCY = 0000 /* cycle length = 0 */ - SETA = 0 - TRLX = 0 - EHTR = 0 - - => 0xFE00 0E00 - -/*### BR2 & OR2 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR2(0x0000 0110) & OR2(0x0000 0114) */ - - BR2 & OR2 = 0x0000 0000 /* Not used */ - -/*### BR3 & OR3 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR3(0x0000 0118) & OR3(0x0000 011C) */ -/*### BCSR */ - - BA = 1111 1010 0100 0000 0 /* Base addr = 0xFA40 0000 */ - AT = 000 - PS = 00 - PARE = 0 - WP = 0 - MS = 0 /* GPCM */ - V = 1 /* Valid */ - - => 0xFA40 0001 - - AM = 1111 1111 0111 1111 1 /* (?) */ - ATM = 000 - CSNT/SAM = 1 - ACS/G5LA,G5LS = 00 - BIH = 1 /* Burst inhibited */ - SCY = 0001 /* cycle length = 1 */ - SETA = 0 - TRLX = 0 - - => 0xFF7F 8910 - -/*### BR4 & OR4 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR4(0x0000 0120) & OR4(0x0000 0124) */ -/*### NVRAM & SRAM */ - - BA = 1111 1010 0000 0000 0 /* Base addr = 0xFA00 0000 */ - AT = 000 - PS = 01 - PARE = 0 - WP = 0 - MS = 0 /* GPCM */ - V = 1 /* Valid */ - - => 0xFA00 0401 - - AM = 1111 1111 1111 1000 0 /* 8MByte */ - ATM = 000 - CSNT/SAM = 1 - ACS/G5LA,G5LS = 00 - BIH = 1 /* Burst inhibited */ - SCY = 0111 /* cycle length = 7 */ - SETA = 0 - TRLX = 0 - - => 0xFFF8 0970 - -/*### BR5 & OR5 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR2(0x0000 0128) & OR2(0x0000 012C) */ - - BR5 & OR5 = 0x0000 0000 /* Not used */ - -/*### BR6 & OR6 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR2(0x0000 0130) & OR2(0x0000 0134) */ - - BR6 & OR6 = 0x0000 0000 /* Not used */ - -/*### BR7 & OR7 */ -/*### Base Registers & Option Registers */ -/*### Chap. 16.4.1 & 16.4.2 */ -/*### Offset : BR7(0x0000 0138) & OR7(0x0000 013C) */ - - BR7 & OR7 = 0x0000 0000 /* Not used */ - -/*### MAR */ -/*### Memory Address Register */ -/*### Chap. 16.4.7 */ -/*### Offset : 0x0000 0164 */ - - MA = External memory address - -/*### MCR */ -/*### Memory Command Register */ -/*### Chap. 16.4.5 */ -/*### Offset : 0x0000 0168 */ - - OP = xx /* Command op code */ - UM = 1 /* Select UPMA */ - MB = 001 /* Select CS1 */ - MCLF = xxxx /* Loop times */ - MAD = xx xxxx /* Memory array index */ - -/*### MAMR */ -/*### Machine A Mode Register */ -/*### Chap. 16.4.4 */ -/*### Offset : 0x0000 0170 */ - - PTA = 0101 1000 - PTAE = 1 /* Periodic timer A enabled */ - AMA = 010 - DSA = 00 - G0CLA = 000 - GPLA4DIS = 1 - RLFA = 0100 - WLFA = 0011 - TLFA = 0000 - - => 0x58A0 1430 - -/*### MBMR */ -/*### Machine B Mode Register */ -/*### Chap. 16.4.4 */ -/*### Offset : 0x0000 0174 */ - - PTA = 0100 1110 - PTAE = 0 /* Periodic timer B disabled */ - AMA = 000 - DSA = 00 - G0CLA = 000 - GPLA4DIS = 1 - RLFA = 0000 - WLFA = 0000 - TLFA = 0000 - - => 0x4E00 1000 - -/*### MSTAT */ -/*### Memory Status Register */ -/*### Chap. 16.4.3 */ -/*### Offset : 0x0000 0178 */ - - PER0~PER7 = Parity error - WPER = Write protection error - - => 0x0000 - -/*### MPTPR */ -/*### Memory Periodic Timer Prescaler Register */ -/*### Chap. 16.4.8 */ -/*### Offset : 0x0000 017A */ - - PTP = 0000 1000 /* Divide by 8 */ - - => 0x0800 - -/*### MDR */ -/*### Memory Data Register */ -/*### Chap. 16.4.6 */ -/*### Offset : 0x0000 017C */ - - MD = Memory data contains the RAM array word - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* TIMERS */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - -/*### TBREFx */ -/*### Timebase Reference Registers */ -/*### Chap. 11.9.2 */ -/*### Offset : TBREFF0(0x0000 0204)/TBREFF1(0x0000 0208) */ -/*### (Locked) */ - - TBREFF0 = 0xFFFF FFFF - TBREFF1 = 0xFFFF FFFF - ---------------------------------------------------------------------- - -/*### TBSCR */ -/*### Timebase Status and Control Registers */ -/*### Chap. 11.9.3 */ -/*### Offset : 0x0000 0200 */ -/*### (Locked) */ - - TBIRQ = 00000000 - REF0 = 0 - REF1 = 0 - REFE0 = 0 /* Reference interrupt disable */ - REFE1 = 0 - TBF = 1 - TBE = 1 /* Timebase enable */ - - => 0x0003 - ---------------------------------------------------------------------- - -/*### RTCSC */ -/*### Real-Time Clock Status and Control Registers */ -/*### Chap. 11.10.1 */ -/*### Offset : 0x0000 0220 */ -/*### (Locked) */ - - RTCIRQ = 00000000 - SEC = 1 - ALR = 0 - 38K = 0 /* PITRTCLK is driven by 32.768KHz */ - SIE = 0 - ALE = 0 - RTF = 0 - RTE = 1 /* Real-Time clock enabled */ - - => 0x0081 - ---------------------------------------------------------------------- - -/*### RTC */ -/*### Real-Time Clock Registers */ -/*### Chap. 11.10.2 */ -/*### Offset : 0x0000 0224 */ -/*### (Locked) */ - - RTC = Real time clock measured in second - ---------------------------------------------------------------------- - -/*### RTCAL */ -/*### Real-Time Clock Alarm Registers */ -/*### Chap. 11.10.3 */ -/*### Offset : 0x0000 022C */ -/*### (Locked) */ - - ALARM = 0xFFFF FFFF - ---------------------------------------------------------------------- - -/*### RTSEC */ -/*### Real-Time Clock Alarm Second Registers */ -/*### Chap. 11.10.4 */ -/*### Offset : 0x0000 0228 */ -/*### (Locked) */ - - COUNTER = Counter bits(fraction of a second) - ---------------------------------------------------------------------- - -/*### PISCR */ -/*### Periodic Interrupt Status and Control Register */ -/*### Chap. 11.11.1 */ -/*### Offset : 0x0000 0240 */ -/*### (Locked) */ - - PIRQ = 0 - PS = 0 /* Write 1 to clear */ - PIE = 0 - PITF = 1 - PTE = 0 /* PIT disabled */ - ---------------------------------------------------------------------- - -/*### PITC */ -/*### PIT Count Register */ -/*### Chap. 11.11.2 */ -/*### Offset : 0x0000 0244 */ -/*### (Locked) */ - - PITC = PIT count - ---------------------------------------------------------------------- - -/*### PITR */ -/*### PIT Register */ -/*### Chap. 11.11.3 */ -/*### Offset : 0x0000 0248 */ -/*### (Locked) */ - - PIT = PIT count /* Read only */ - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* CLOCKS */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - - ---------------------------------------------------------------------- - -/*### SCCR */ -/*### System Clock and Reset Control Register */ -/*### Chap. 15.6.1 */ -/*### Offset : 0x0000 0280 */ -/*### (Locked) */ - - COM = 11 /* Clock output disabled */ - TBS = 1 /* Timebase frequency source is GCLK2 divided by 16 */ - RTDIV = 0 /* The clock is divided by 4 */ - RTSEL = 0 /* OSCM(Crystal oscillator) is selected */ - CRQEN = 0 - PRQEN = 0 - EBDF = 00 /* CLKOUT is GCLK2 divided by 1 */ - DFSYNC = 00 /* Divided by 1 (normal operation) */ - DFBRG = 00 /* Divided by 1 (normal operation) */ - DFNL = 000 - DFNH = 000 - - => 0x6200 0000 - ---------------------------------------------------------------------- - -/*### PLPRCR */ -/*### PLL, Low-Power, and Reset Control Register */ -/*### Chap. 15.6.2 */ -/*### Offset : 0x0000 0284 */ -/*### (Locked) */ - - MF = 0x005 /* 48MHz (?) ( = 8MHz * (MF+1) ) */ - SPLSS = 0 - TEXPS = 0 - TMIST = 0 - CSRC = 0 /* The general system clock is generated by the DFNH field */ - LPM = 00 /* Normal high/normal low mode */ - CSR = 0 - LOLRE = 0 - FIOPD = 0 - - => 0x0050 0000 - ---------------------------------------------------------------------- - -/*### RSR */ -/*### Reset Status Register */ -/*### Chap. 12.2 */ -/*### Offset : 0x0000 0288 */ -/*### (Locked) */ - - EHRS = External hard reset - ESRS = External soft reset - LLRS = Loss-of-lock reset - SWRS = Software watchdog reset - CSRS = Check stop reset - DBHRS = Debug port hard reset - DBSRS = Debug port soft reset - JTRS = JTAG reset - - -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ -/* DMA */ -/* */ -/*------------------------------------------------------------------- */ -/*------------------------------------------------------------------- */ ---------------------------------------------------------------------- - -/*### SDSR */ -/*### SDMA Status Register */ -/*### Chap. 20.2.2 */ -/*### Offset : 0x0000 0908 */ - - SBER = 0 /* SDMA channel bus error */ - DSP2 = 0 /* DSP chain2 (Tx) interrupt */ - DSP1 = 0 /* DSP chain1 (Rx) interrupt */ - - => 0x00 - -/*### SDMR */ -/*### SDMA Mask Register */ -/*### Chap. 20.2.3 */ -/*### Offset : 0x0000 090C */ - - SBER = 0 - DSP2 = 0 - DSP1 = 0 /* All interrupts are masked */ - - => 0x00 - -/*### SDAR */ -/*### SDMA Address Register */ -/*### Chap. 20.2.4 */ -/*### Offset : 0x0000 0904 */ - - AR = 0xxxxx xxxx /* current system address */ - - => 0xFA20 23AC - -/*### IDSRx */ -/*### IDMA Status Register */ -/*### Chap. 20.3.3.2 */ -/*### Offset : IDSR1(0x0000 0910) & IDSR2(0x0000 0918) */ - - AD = 0 - DONE = 0 - OB = 0 - - => 0x00 - -/*### IDMRx */ -/*### IDMA Mask Register */ -/*### Chap. 20.3.3.3 */ -/*### Offset : IDMR1(0x0000 0914) & IDMR2(0x0000 091C) */ - - AD = 0 - DONE = 0 - OB = 0 diff --git a/board/RPXlite/README.PlanetCore b/board/RPXlite/README.PlanetCore deleted file mode 100644 index b73c5f5a87..0000000000 --- a/board/RPXlite/README.PlanetCore +++ /dev/null @@ -1,163 +0,0 @@ -After several heart-struck failure, I got one workable way to program -each other in FLASH between PlanetCore and U-Boot. - -Hardware Platform : RPXlite DW(EP 823 H1 DW) - -1. From U-Boot to PlanetCore - -Utilities : PlanetCore Boot Loader - PCL200.mot - -[root@sam tftpboot]# ppc_8xx-objcopy -O ppcboot -PCL200.mot pcl200.bin - -[Target Operation] -u-boot>t 100000 pcl200.bin -u-boot>go 0x100000 -## Starting application at 0x00100000 ... - -MPC8xx PlanetCore Flash Burner v2.00 -Copyright 2001 Embedded Planet. All rights reserved. - -Construct Flash Device.....done. - - -Program MPC8xx PlanetCore Boot Loader v2.00 -Built Sep 19, 2001 at 14:34:42 -Image located from FC000000 to FC01B5D1. -(Skipping an image, only loading low boot image) - -Low boot board detected, skipping high boot image. -Erasing, programming and verifying will start in 20 -seconds -Press P to start immediately or ESC to cancel -Press Space or Enter for more options. -.............. - -Erasing -Programming -FLASH programmed successfully! -Press R to induce a hard reset - -MPC8xx PlanetCore Boot Loader v2.00 -Copyright 2001 Embedded Planet. All rights reserved. -DRAM available size = 64 MB -wvCV -DRAM OK -> - -2. From PlanetCore to U-Boot - -Utilities : PlanetCore FLASH Burner - PCB200.mot - -Use Flash Burner to finish the work: - -First, TFTP the U-Boot image file to RAM; For example, -RPXlite_DW.bin to 0x400000 -Second, TFTP FLASH Burner to RAM; For example, -0x100000 -Third, run the FLASH Burner and Program the U-Boot -image into the correct location in FLASH. - -[Target Operation] -MPC8xx PlanetCore Boot Loader v2.00 -Copyright 2001 Embedded Planet. All rights reserved. -DRAM available size = 64 MB -wvCV -DRAM OK ->t -Load using tftp via Ethernet -Enter server IP address <172.16.115.6> : -Enter server filename : RPXlite_DW.bin -Enter (B)inary or (S)record input mode : B -Enter address offset : <00400000 hex> : - -Total bytes = 120096 in 232184 uSecs -Loaded addresses 00400000 through 0041D51F. -Start address = 00400000 ->t -Load using tftp via Ethernet -Enter server IP address <172.16.115.6> : -Enter server filename : PCB200.mot -Enter (B)inary or (S)record input mode : S -Enter address offset : <00000000 hex> : -.512.1024..2048....4096..... -Total bytes = 326280 in 2570249 uSecs -Loaded addresses 00100000 through 0011BB51. -Start address = 00100000 ->go -[Go 00100000] - -MPC8xx PlanetCore Flash Burner v2.00 -Copyright 2001 Embedded Planet. All rights reserved. - -Construct Flash Device.....done. - -Bad start address -Start = 0xFFFFFFFF, target = 0xFFFFFFFF, length = -0xFFFFFFFF -Forcing Menu Interface - -h[elp] Show commands. -c[ode] Show information on code to be loaded. -di[splay] Display all flash sections. -du[mp] Dump memory. d ? for more info. -e[rase] Erase flash sections. -f[ill] Fill flash sections. -im[age] Toggle load high, low, or both flash -images. -in[fo] Show flash information. -ma[p] Show memory map. -mo[dify] Modify memory. m ? for more info. -p[rogram] Erase, program, and verify now. -reset Restart the loader. -s[how] Show flash sections to erase and program. -t[est] Test flash sections. -q[uit] Quit without programming. -#program 400000 ff000000 1D51F -doProgram( 400000 ff000000 1D51F ) - -Start = 0x00400000, target = 0xFF000000, length = -0x0001D51F -Erasing sector 0xFF000000, length 0x008000. -Erasing sector 0xFF008000, length 0x008000. -Erasing sector 0xFF010000, length 0x008000. -Erasing sector 0xFF018000, length 0x008000. -Programming FF000000 through FF01D51E -FLASH programmed successfully! -Press R to induce a hard reset - -Forcing Hard Reset by MachineCheck and -ResetOnCheckstop... - -U-Boot 1.1.2 (Aug 29 2004 - 15:11:27) - -CPU: PPC823EZTnnB2 at 48 MHz: 16 kB I-Cache 8 kB -D-Cache -Board: RPXlite_DW -DRAM: 64 MB -FLASH: 16 MB -*** Warning - bad CRC, using default environment - -In: serial -Out: serial -Err: serial -Net: SCC ETHERNET -u-boot> - -------------------------------------------------- - -Well, sometimes network function of PlanetCore couldn't work when -switching from U-Boot to PlanetCore. For example, you couldn't -download a file from HOST PC via TFTP. Don't worry, just restart your -HOST PC and everything would work as smooth as clockwork. I don't -know the reason WHY:-) - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Merry Christmas and Happy New Year! - -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - -===== -Best regards, - -Sam diff --git a/board/RPXlite/RPXlite.c b/board/RPXlite/RPXlite.c deleted file mode 100644 index 08575a4930..0000000000 --- a/board/RPXlite/RPXlite.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - * - * DRAM related UPMA register values are modified. - * See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS - */ - -#include -#include - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFCC25 - -const uint sdram_table[] = { - /* - * Single Read. (Offset 00h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08, - 0x3FBFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Read. (Offset 08h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88, - 0x3FBFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Single Write. (Offset 18h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00, - 0x3FFFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Burst Write. (Offset 20h in UPMA RAM) - */ - 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C, - 0x0CFFCC00, 0x33FFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, - - /* - * Refresh. (Offset 30h in UPMA RAM) - */ - 0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24, - 0x3FFFCC27, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, - - /* - * Exception. (Offset 3Ch in UPMA RAM) - */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_ -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - */ - -int checkboard (void) -{ - puts ("Board: RPXlite\n"); - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size10; - - upmconfig (UPMA, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - /* Refresh clock prescalar */ - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - memctl->memc_mar = 0x00000000; - - /* Map controller banks 1 to the SDRAM bank */ - memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; - memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; - - memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - refresh twice */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* Check Bank 0 Memory Size - * try 10 column mode - */ - - size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM, - SDRAM_MAX_SIZE); - - return (size10); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mamr = mamr_value; - - return (get_ram_size (base, maxsize)); -} diff --git a/board/RPXlite/flash.c b/board/RPXlite/flash.c deleted file mode 100644 index 21b11d4e90..0000000000 --- a/board/RPXlite/flash.c +++ /dev/null @@ -1,508 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - * - * Some of flash control words are modified. (from 2x16bit device - * to 4x8bit device) - * RPXLite board I tested has only 4 AM29LV800BB devices. Other devices - * are not tested. - * - * (?) Does an RPXLite board which - * does not use AM29LV800 flash memory exist ? - * I don't know... - */ - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); -static void flash_get_offsets (ulong base, flash_info_t *info); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ -/* volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; */ -/* volatile memctl8xx_t *memctl = &immap->im_memctl; */ - unsigned long size_b0 ; - int i; - - /* Init: no FLASHes known */ - for (i=0; imemc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000); - memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V; -%%%*/ - /* Re-do sizing to get full correct info */ - - size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]); - flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - - flash_info[0].size = size_b0; - - return (size_b0); -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00010000; - info->start[2] = base + 0x00018000; - info->start[3] = base + 0x00020000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + ((i-3) * 0x00040000) ; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00010000; - info->start[i--] = base + info->size - 0x00018000; - info->start[i--] = base + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00040000; - } - } - -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); - break; - case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); - break; - case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); - break; - case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - ulong value; - ulong base = (ulong)addr; - - /* Write auto select command: read Manufacturer ID */ - addr[0xAAA] = 0x00AA00AA ; - addr[0x555] = 0x00550055 ; - addr[0xAAA] = 0x00900090 ; - - value = addr[0] ; - - switch (value & 0x00FF00FF) { - case AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr[2] ; /* device ID */ - - switch (value & 0x00FF00FF) { - case (AMD_ID_LV400T & 0x00FF00FF): - info->flash_id += FLASH_AM400T; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV400B & 0x00FF00FF): - info->flash_id += FLASH_AM400B; - info->sector_count = 11; - info->size = 0x00100000; - break; /* => 1 MB */ - - case (AMD_ID_LV800T & 0x00FF00FF): - info->flash_id += FLASH_AM800T; - info->sector_count = 19; - info->size = 0x00200000; - break; /* => 2 MB */ - - case (AMD_ID_LV800B & 0x00FF00FF): - info->flash_id += FLASH_AM800B; - info->sector_count = 19; - info->size = 0x00400000; /*%%% Size doubled by yooth */ - break; /* => 4 MB */ - - case (AMD_ID_LV160T & 0x00FF00FF): - info->flash_id += FLASH_AM160T; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ - - case (AMD_ID_LV160B & 0x00FF00FF): - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00400000; - break; /* => 4 MB */ -#if 0 /* enable when device IDs are available */ - case AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ - - case AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 67; - info->size = 0x00800000; - break; /* => 8 MB */ -#endif - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - /*%%% sector start address modified */ - /* set up sector start address table */ - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00010000; - info->start[2] = base + 0x00018000; - info->start[3] = base + 0x00020000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + ((i-3) * 0x00040000) ; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00010000; - info->start[i--] = base + info->size - 0x00018000; - info->start[i--] = base + info->size - 0x00020000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00040000; - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr = (volatile unsigned long *)(info->start[i]); - info->protect[i] = addr[4] & 1 ; - } - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr = (volatile unsigned long *)info->start[0]; - - *addr = 0xF0F0F0F0; /* reset bank */ - } - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - vu_long *addr = (vu_long*)(info->start[0]); - int flag, prot, sect, l_sect; - ulong start, now, last; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > FLASH_AMD_COMP)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0x80808080; - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr = (vu_long *)(info->start[sect]) ; - addr[0] = 0x30303030 ; - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (vu_long *)(info->start[l_sect]); - while ((addr[0] & 0x80808080) != 0x80808080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - -DONE: - /* reset to read mode */ - addr = (vu_long *)info->start[0]; - addr[0] = 0xF0F0F0F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t *info, ulong dest, ulong data) -{ - vu_long *addr = (vu_long *)(info->start[0]); - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) { - return (2); - } - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr[0xAAA] = 0xAAAAAAAA; - addr[0x555] = 0x55555555; - addr[0xAAA] = 0xA0A0A0A0; - - *((vu_long *)dest) = data; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer (0); - while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds deleted file mode 100644 index 0eb2fba00c..0000000000 --- a/board/RPXlite/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug deleted file mode 100644 index b9c84c77d6..0000000000 --- a/board/RPXlite/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/boards.cfg b/boards.cfg index 2125e9042f..1faa906c37 100644 --- a/boards.cfg +++ b/boards.cfg @@ -1246,5 +1246,3 @@ Orphan powerpc 74xx_7xx - - evb64260 Orphan powerpc mpc824x - - mousse MOUSSE - - Orphan powerpc mpc8260 - - - rsdproto - - Orphan powerpc mpc8260 - - rpxsuper RPXsuper - - -Orphan powerpc mpc8xx - - - RPXClassic - - -Orphan powerpc mpc8xx - - - RPXlite - - diff --git a/doc/README.scrapyard b/doc/README.scrapyard index b068544c3b..99155007df 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -11,6 +11,8 @@ easily if here is something they might want to dig for... Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +RPXClassic powerpc mpc8xx - 2014-04-04 +RPXlite powerpc mpc8xx - 2014-04-04 genietv powerpc mpc8xx - 2014-04-04 mbx8xx powerpc mpc8xx - 2014-04-04 nx823 powerpc mpc8xx - 2014-04-04 diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c index 3732583838..663827780e 100644 --- a/drivers/pcmcia/mpc8xx_pcmcia.c +++ b/drivers/pcmcia/mpc8xx_pcmcia.c @@ -211,7 +211,7 @@ static u_int m8xx_get_graycode(u_int size) #if 0 -#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE) +#if defined(CONFIG_RPXLITE) /* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks. * SYPCR is write once only, therefore must the slowest memory be faster diff --git a/drivers/pcmcia/rpx_pcmcia.c b/drivers/pcmcia/rpx_pcmcia.c index c7c425b93c..5b24f0bfbe 100644 --- a/drivers/pcmcia/rpx_pcmcia.c +++ b/drivers/pcmcia/rpx_pcmcia.c @@ -18,7 +18,7 @@ #endif #if defined(CONFIG_PCMCIA) \ - && (defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)) + && defined(CONFIG_RPXLITE) #define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE" @@ -70,4 +70,4 @@ static int pcmcia_hardware_disable(int slot) #endif -#endif /* CONFIG_PCMCIA && (CONFIG_RPXCLASSIC || CONFIG_RPXLITE) */ +#endif /* CONFIG_PCMCIA && CONFIG_RPXLITE */ diff --git a/include/common.h b/include/common.h index 580615b9ef..baf361b3e5 100644 --- a/include/common.h +++ b/include/common.h @@ -505,10 +505,6 @@ extern ssize_t spi_read (uchar *, int, uchar *, int); extern ssize_t spi_write (uchar *, int, uchar *, int); #endif -#ifdef CONFIG_RPXCLASSIC -void rpxclassic_init (void); -#endif - void rpxlite_init (void); #ifdef CONFIG_HERMES diff --git a/include/commproc.h b/include/commproc.h index 605aac2ec2..29a3e61e80 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -954,41 +954,6 @@ typedef struct scc_enet { #endif /* CONFIG_QS860T */ -/*** RPXCLASSIC *****************************************************/ - -#ifdef CONFIG_RPXCLASSIC - -#ifdef CONFIG_FEC_ENET - -# define FEC_ENET /* use FEC for EThernet */ -# undef SCC_ENET - -#else /* ! CONFIG_FEC_ENET */ - -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC1 use. - */ -#define PROFF_ENET PROFF_SCC1 -#define CPM_CR_ENET CPM_CR_CH_SCC1 -#define SCC_ENET 0 -#define PA_ENET_RXD ((ushort)0x0001) -#define PA_ENET_TXD ((ushort)0x0002) -#define PA_ENET_TCLK ((ushort)0x0200) -#define PA_ENET_RCLK ((ushort)0x0800) -#define PB_ENET_TENA ((uint)0x00001000) -#define PC_ENET_CLSN ((ushort)0x0010) -#define PC_ENET_RENA ((ushort)0x0020) - -/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to - * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. - */ -#define SICR_ENET_MASK ((uint)0x000000ff) -#define SICR_ENET_CLKRT ((uint)0x0000003d) - -#endif /* CONFIG_FEC_ENET */ - -#endif /* CONFIG_RPXCLASSIC */ - /*** RPXLITE ********************************************************/ #ifdef CONFIG_RPXLITE diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h deleted file mode 100644 index 0f07d0cfe9..0000000000 --- a/include/configs/RPXClassic.h +++ /dev/null @@ -1,483 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define RPXClassic_50MHz - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC860 1 -#define CONFIG_RPXCLASSIC 1 - -#define CONFIG_SYS_TEXT_BASE 0xff000000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ - -/* Define CONFIG_FEC_ENET to use Fast ethernet instead of ethernet on SCC1 */ -#define CONFIG_FEC_ENET -#ifdef CONFIG_FEC_ENET -#define CONFIG_SYS_DISCOVER_PHY 1 -#define CONFIG_MII 1 -#endif /* CONFIG_FEC_ENET */ -#define CONFIG_MISC_INIT_R - -/* Video console (graphic: Epson SED13806 on ECCX board, no keyboard */ -#if 1 -#define CONFIG_VIDEO_SED13806 -#define CONFIG_NEC_NL6448BC20 -#define CONFIG_VIDEO_SED13806_16BPP - -#define CONFIG_CFB_CONSOLE -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_CONSOLE_EXTRA_INFO -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_VIDEO_SW_CURSOR -#endif - -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_ZERO_BOOTDELAY_CHECK 1 - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "tftpboot; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ELF - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_RESET_ADDRESS 0x80000000 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0040000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00C0000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFA200000 - -/*----------------------------------------------------------------------------- - * I2C Configuration - *----------------------------------------------------------------------------- - */ -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0x34 - - -/* enable I2C and select the hardware/software driver */ -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#undef CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ - -#if defined(CONFIG_SYS_I2C_SOFT) -#define CONFIG_SYS_I2C 1 -/* - * Software (bit-bang) I2C driver configuration - */ -#define I2C_PORT 1 /* Port A=0, B=1, C=2, D=3 */ -#define I2C_ACTIVE (iop->pdir |= 0x00000010) -#define I2C_TRISTATE (iop->pdir &= ~0x00000010) -#define I2C_READ ((iop->pdat & 0x00000010) != 0) -#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00000010; \ - else iop->pdat &= ~0x00000010 -#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00000020; \ - else iop->pdat &= ~0x00000020 -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - - -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x34 -#endif - -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM X24C16 */ -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x3000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 - -#if defined(DEBUG) || defined (CONFIG_VIDEO_SED13806) || defined(CONFIG_CMD_IDE) -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE 0xFF000000 -/*%%% #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#if 0 -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x20000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x8000 -#define CONFIG_ENV_SIZE 0x8000 /* Total Size of Environment Sector */ -#else -#define CONFIG_ENV_IS_IN_NVRAM 1 -#define CONFIG_ENV_ADDR 0xfa000100 -#define CONFIG_ENV_SIZE 0x1000 -#endif - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWP) - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR ( (4 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS | PLPRCR_SPLSS | PLPRCR_TMIST) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF00 -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/* #define CONFIG_SYS_DER 0x2002000F */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */ - -/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V) - -/* - * BR1 and OR1 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x01000000 /* max 16 MB */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00 - -#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* RPXLITE mem setting */ -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* BCSR */ -#define CONFIG_SYS_OR3_PRELIM 0xff7f8970 -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ -#define CONFIG_SYS_OR4_PRELIM 0xFFF80970 - -/* ECCX CS settings */ -#define SED13806_OR 0xFFC00108 /* - 4 Mo - - Burst inhibit - - external TA */ -#define SED13806_REG_ADDR 0xa0000000 -#define SED13806_ACCES 0x801 /* 16 bit access */ - - -/* Global definitions for the ECCX board */ -#define ECCX_CSR_ADDR (0xfac00000) -#define ECCX_CSR8_OFFSET (0x8) -#define ECCX_CSR11_OFFSET (0xB) -#define ECCX_CSR12_OFFSET (0xC) - -#define ECCX_CSR8 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR8_OFFSET) -#define ECCX_CSR11 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR11_OFFSET) -#define ECCX_CSR12 (volatile unsigned char *)(ECCX_CSR_ADDR + ECCX_CSR12_OFFSET) - - -#define REG_GPIO_CTRL 0x008 - -/* Definitions for CSR8 */ -#define ECCX_ENEPSON 0x80 /* Bit 0: - 0= disable and reset SED1386 - 1= enable SED1386 */ -/* Bit 1: 0= SED1386 in Big Endian mode */ -/* 1= SED1386 in little endian mode */ -#define ECCX_LE 0x40 -#define ECCX_BE 0x00 - -/* Bit 2,3: Selection */ -/* 00 = Disabled */ -/* 01 = CS2 is used for the SED1386 */ -/* 10 = CS5 is used for the SED1386 */ -/* 11 = reserved */ -#define ECCX_CS2 0x10 -#define ECCX_CS5 0x20 - -/* Definitions for CSR12 */ -#define ECCX_ID 0x02 -#define ECCX_860 0x01 - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 58 - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV8 - -/* - * MAMR settings for SDRAM - */ - -/* 10 column SDRAM */ -#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 | \ - MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X) - -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ -/* Configuration variable added by yooth. */ -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ - -/* - * BCSRx - * - * Board Status and Control Registers - * - */ - -#define BCSR0 0xFA400000 -#define BCSR1 0xFA400001 -#define BCSR2 0xFA400002 -#define BCSR3 0xFA400003 - -#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ -#define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ -#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ -#define BCSR0_COLTEST 0x20 -#define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 - -#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ -#define BCSR1_PCVCTL6 0x02 -#define BCSR1_PCVCTL5 0x04 -#define BCSR1_PCVCTL4 0x08 -#define BCSR1_IPB5SEL 0x10 - -#define BCSR2_MIIRST 0x80 -#define BCSR2_MIIPWRDWN 0x40 -#define BCSR2_MIICTL 0x08 - -#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ -#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ -#define BCSR3_RDY_BSY 0x04 /* Flash Operation */ -#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - - -/* - * Environment setting - */ - -/* #define CONFIG_ETHADDR 00:10:EC:00:2C:A2 */ -/* #define CONFIG_IPADDR 10.10.106.1 */ -/* #define CONFIG_SERVERIP 10.10.104.11 */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h deleted file mode 100644 index a28230a5d7..0000000000 --- a/include/configs/RPXlite.h +++ /dev/null @@ -1,395 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* Yoo. Jonghoon, IPone, yooth@ipone.co.kr - * U-Boot port on RPXlite board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define RPXLite_50MHz - -/* - * High Level Configuration Options - * (easy to change) - */ - -#undef CONFIG_MPC860 -#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ -#define CONFIG_RPXLITE 1 - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#undef CONFIG_BOOTARGS -#define CONFIG_BOOTCOMMAND \ - "bootp; " \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "bootm" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */ - -/* enable I2C and select the hardware/software driver */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 40000 /* 40 kHz is supposed to work */ -#define CONFIG_SYS_I2C_SOFT_SLAVE 0xFE -/* Software (bit-bang) I2C driver configuration */ -#define PB_SCL 0x00000020 /* PB 26 */ -#define PB_SDA 0x00000010 /* PB 27 */ - -#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) -#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) -#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) -#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) -#define I2C_SDA(bit) if (bit) \ - immr->im_cpm.cp_pbdat |= PB_SDA; \ - else \ - immr->im_cpm.cp_pbdat &= ~PB_SDA -#define I2C_SCL(bit) if (bit) \ - immr->im_cpm.cp_pbdat |= PB_SCL; \ - else \ - immr->im_cpm.cp_pbdat &= ~PB_SCL -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -/* M41T11 Serial Access Timekeeper(R) SRAM */ -#define CONFIG_RTC_M41T11 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -/* play along with the linux driver */ -#define CONFIG_SYS_M41T11_BASE_YEAR 1900 - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/* - * Command line configuration. - */ -#include - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_RESET_ADDRESS 0x09900000 - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFA200000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#ifdef CONFIG_BZIP2 -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */ -#else -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */ -#endif /* CONFIG_BZIP2 */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 19 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_DIRECT_FLASH_TFTP - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SECT_SIZE 0x40000 /* We use one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) - -#define CONFIG_ENV_OVERWRITE - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_RTE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - * - * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! - */ -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF00 -/* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS) - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0 and OR0 (FLASH) - */ - -#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */ - -/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI) - -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V) - -/* - * BR1 and OR1 (SDRAM) - * - */ -#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ -#define SDRAM_MAX_SIZE 0x01000000 /* max 16 MB */ - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00 - -#define CONFIG_SYS_OR1_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) - -/* RPXLITE mem setting */ -#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* BCSR */ -#define CONFIG_SYS_OR3_PRELIM 0xFFFF8910 -#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ -#define CONFIG_SYS_OR4_PRELIM 0xFFFE0970 - -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MAMR_PTA 58 - -/* - * Refresh clock Prescalar - */ -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV8 - -/* - * MAMR settings for SDRAM - */ - -/* 10 column SDRAM */ -#define CONFIG_SYS_MAMR_10COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ - MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A12 | \ - MAMR_GPL_A4DIS | MAMR_RLFA_4X | MAMR_WLFA_3X | MAMR_TLFA_16X) - -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ -/* Configuration variable added by yooth. */ -/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% */ - -/* - * BCSRx - * - * Board Status and Control Registers - * - */ - -#define BCSR0 0xFA400000 -#define BCSR1 0xFA400001 -#define BCSR2 0xFA400002 -#define BCSR3 0xFA400003 - -#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ -#define BCSR0_ENNVRAM 0x02 /* CS4# Control */ -#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ -#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ -#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ -#define BCSR0_COLTEST 0x20 -#define BCSR0_ETHLPBK 0x40 -#define BCSR0_ETHEN 0x80 - -#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ -#define BCSR1_PCVCTL6 0x02 -#define BCSR1_PCVCTL5 0x04 -#define BCSR1_PCVCTL4 0x08 -#define BCSR1_IPB5SEL 0x10 - -#define BCSR2_ENPA5HDR 0x08 /* USB Control */ -#define BCSR2_ENUSBCLK 0x10 -#define BCSR2_USBPWREN 0x20 -#define BCSR2_USBSPD 0x40 -#define BCSR2_USBSUSP 0x80 - -#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ -#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ -#define BCSR3_RDY_BSY 0x04 /* Flash Operation */ -#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ -#define BCSR3_D27 0x10 /* Dip Switch settings */ -#define BCSR3_D26 0x20 -#define BCSR3_D25 0x40 -#define BCSR3_D24 0x80 - -#endif /* __CONFIG_H */ diff --git a/include/pcmcia.h b/include/pcmcia.h index 1ad3e636a9..952a67c17c 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -22,7 +22,7 @@ #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) /* The RPX series use SLOT_B */ -#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE) +#if defined(CONFIG_RPXLITE) # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_FADS) /* The FADS series are a mess */ # if defined(CONFIG_MPC86x) || defined(CONFIG_MPC821) diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c index 53c0e4dfda..d12250018a 100644 --- a/post/cpu/mpc8xx/ether.c +++ b/post/cpu/mpc8xx/ether.c @@ -365,11 +365,6 @@ static void scc_init (int scc_index) immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC | SCC_PSMR_NIB22 | SCC_PSMR_LPB; -#ifdef CONFIG_RPXCLASSIC - *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK; - *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX); -#endif - #ifdef CONFIG_RPXLITE *((uchar *) BCSR0) |= BCSR0_ETHEN; #endif @@ -386,8 +381,6 @@ static void scc_init (int scc_index) */ #if defined (CONFIG_FADS) udelay (10000); /* wait 10 ms */ -#elif defined(CONFIG_RPXCLASSIC) - udelay (100000); /* wait 100 ms */ #endif } diff --git a/post/cpu/mpc8xx/uart.c b/post/cpu/mpc8xx/uart.c index 25d63d8120..5214c71b08 100644 --- a/post/cpu/mpc8xx/uart.c +++ b/post/cpu/mpc8xx/uart.c @@ -106,7 +106,7 @@ static void smc_init (int smc_index) ~(smc_index == 1 ? BCSR1_RS232EN_1 : BCSR1_RS232EN_2); #endif -#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) +#if defined(CONFIG_RPXLITE) /* Enable Monitor Port Transceiver */ *((uchar *) BCSR0) |= BCSR0_ENMONXCVR; #endif -- cgit v1.2.3 From 538cf92c8c2e8ea7f78c87b5bfb2f705b4b02fa8 Mon Sep 17 00:00:00 2001 From: Daniel Schwierzeck Date: Thu, 10 Apr 2014 00:39:28 +0200 Subject: MIPS: drop incaip board This is dead hardware and no one is interested in making the necessary changes for upcoming features like generic board or driver model. Signed-off-by: Daniel Schwierzeck Cc: Wolfgang Denk --- MAKEALL | 4 - arch/mips/cpu/mips32/incaip/Makefile | 9 - arch/mips/cpu/mips32/incaip/asc_serial.c | 300 ---- arch/mips/cpu/mips32/incaip/asc_serial.h | 177 -- arch/mips/cpu/mips32/incaip/config.mk | 8 - arch/mips/cpu/mips32/incaip/incaip_clock.c | 100 -- arch/mips/cpu/mips32/incaip/incaip_wdt.S | 55 - arch/mips/include/asm/inca-ip.h | 2430 ---------------------------- arch/mips/include/asm/u-boot-mips.h | 2 - arch/mips/lib/board.c | 3 - board/incaip/Makefile | 9 - board/incaip/README | 57 - board/incaip/config.mk | 16 - board/incaip/flash.c | 655 -------- board/incaip/incaip.c | 110 -- board/incaip/lowlevel_init.S | 287 ---- boards.cfg | 4 - doc/README.scrapyard | 1 + drivers/net/Makefile | 1 - drivers/net/inca-ip_sw.c | 793 --------- include/common.h | 3 - include/configs/incaip.h | 177 -- include/netdev.h | 1 - 23 files changed, 1 insertion(+), 5201 deletions(-) delete mode 100644 arch/mips/cpu/mips32/incaip/Makefile delete mode 100644 arch/mips/cpu/mips32/incaip/asc_serial.c delete mode 100644 arch/mips/cpu/mips32/incaip/asc_serial.h delete mode 100644 arch/mips/cpu/mips32/incaip/config.mk delete mode 100644 arch/mips/cpu/mips32/incaip/incaip_clock.c delete mode 100644 arch/mips/cpu/mips32/incaip/incaip_wdt.S delete mode 100644 arch/mips/include/asm/inca-ip.h delete mode 100644 board/incaip/Makefile delete mode 100644 board/incaip/README delete mode 100644 board/incaip/config.mk delete mode 100644 board/incaip/flash.c delete mode 100644 board/incaip/incaip.c delete mode 100644 board/incaip/lowlevel_init.S delete mode 100644 drivers/net/inca-ip_sw.c delete mode 100644 include/configs/incaip.h (limited to 'include/common.h') diff --git a/MAKEALL b/MAKEALL index 705a0bb5e1..c54240ced6 100755 --- a/MAKEALL +++ b/MAKEALL @@ -419,10 +419,6 @@ LIST_arm="$(targets_by_arch arm | \ ######################################################################### LIST_mips4kc=" \ - incaip \ - incaip_100MHz \ - incaip_133MHz \ - incaip_150MHz \ qemu_mips \ vct_platinum \ vct_platinum_small \ diff --git a/arch/mips/cpu/mips32/incaip/Makefile b/arch/mips/cpu/mips32/incaip/Makefile deleted file mode 100644 index 7341a4a3e8..0000000000 --- a/arch/mips/cpu/mips32/incaip/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2011 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = incaip_wdt.o -obj-y += incaip_clock.o asc_serial.o diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.c b/arch/mips/cpu/mips32/incaip/asc_serial.c deleted file mode 100644 index 6f0e4f2520..0000000000 --- a/arch/mips/cpu/mips32/incaip/asc_serial.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * (INCA) ASC UART support - */ - -#include -#include -#include -#include -#include -#include "asc_serial.h" - - -#define SET_BIT(reg, mask) reg |= (mask) -#define CLEAR_BIT(reg, mask) reg &= (~mask) -#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) -#define SET_BITS(reg, mask) SET_BIT(reg, mask) -#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} - -extern uint incaip_get_fpiclk(void); - -static int serial_setopt (void); - -/* pointer to ASC register base address */ -static volatile incaAsc_t *pAsc = (incaAsc_t *)INCA_IP_ASC; - -/****************************************************************************** -* -* serial_init - initialize a INCAASC channel -* -* This routine initializes the number of data bits, parity -* and set the selected baud rate. Interrupts are disabled. -* Set the modem control signals if the option is selected. -* -* RETURNS: N/A -*/ - -static int asc_serial_init(void) -{ - /* we have to set PMU.EN13 bit to enable an ASC device*/ - INCAASC_PMU_ENABLE(13); - - /* and we have to set CLC register*/ - CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS); - SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001); - - /* initialy we are in async mode */ - pAsc->asc_con = ASCCON_M_8ASYNC; - - /* select input port */ - pAsc->asc_pisel = (CONSOLE_TTY & 0x1); - - /* TXFIFO's filling level */ - SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK, - ASCTXFCON_TXFITLOFF, INCAASC_TXFIFO_FL); - /* enable TXFIFO */ - SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN); - - /* RXFIFO's filling level */ - SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK, - ASCRXFCON_RXFITLOFF, INCAASC_RXFIFO_FL); - /* enable RXFIFO */ - SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN); - - /* enable error signals */ - SET_BIT(pAsc->asc_con, ASCCON_FEN); - SET_BIT(pAsc->asc_con, ASCCON_OEN); - - /* acknowledge ASC interrupts */ - ASC_INTERRUPTS_CLEAR(INCAASC_IRQ_LINE_ALL); - - /* disable ASC interrupts */ - ASC_INTERRUPTS_DISABLE(INCAASC_IRQ_LINE_ALL); - - /* set FIFOs into the transparent mode */ - SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXTMEN); - SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXTMEN); - - /* set baud rate */ - serial_setbrg(); - - /* set the options */ - serial_setopt(); - - return 0; -} - -static void asc_serial_setbrg(void) -{ - ulong uiReloadValue, fdv; - ulong f_ASC; - - f_ASC = incaip_get_fpiclk(); - -#ifndef INCAASC_USE_FDV - fdv = 2; - uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1; -#else - fdv = INCAASC_FDV_HIGH_BAUDRATE; - uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1; -#endif /* INCAASC_USE_FDV */ - - if ( (uiReloadValue < 0) || (uiReloadValue > 8191) ) - { -#ifndef INCAASC_USE_FDV - fdv = 3; - uiReloadValue = (f_ASC / (fdv * 16 * CONFIG_BAUDRATE)) - 1; -#else - fdv = INCAASC_FDV_LOW_BAUDRATE; - uiReloadValue = (f_ASC / (8192 * CONFIG_BAUDRATE / fdv)) - 1; -#endif /* INCAASC_USE_FDV */ - - if ( (uiReloadValue < 0) || (uiReloadValue > 8191) ) - { - return; /* can't impossibly generate that baud rate */ - } - } - - /* Disable Baud Rate Generator; BG should only be written when R=0 */ - CLEAR_BIT(pAsc->asc_con, ASCCON_R); - -#ifndef INCAASC_USE_FDV - /* - * Disable Fractional Divider (FDE) - * Divide clock by reload-value + constant (BRS) - */ - /* FDE = 0 */ - CLEAR_BIT(pAsc->asc_con, ASCCON_FDE); - - if ( fdv == 2 ) - CLEAR_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 0 */ - else - SET_BIT(pAsc->asc_con, ASCCON_BRS); /* BRS = 1 */ - -#else /* INCAASC_USE_FDV */ - - /* Enable Fractional Divider */ - SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */ - - /* Set fractional divider value */ - pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK; - -#endif /* INCAASC_USE_FDV */ - - /* Set reload value in BG */ - pAsc->asc_bg = uiReloadValue; - - /* Enable Baud Rate Generator */ - SET_BIT(pAsc->asc_con, ASCCON_R); /* R = 1 */ -} - -/******************************************************************************* -* -* serial_setopt - set the serial options -* -* Set the channel operating mode to that specified. Following options -* are supported: CREAD, CSIZE, PARENB, and PARODD. -* -* Note, this routine disables the transmitter. The calling routine -* may have to re-enable it. -* -* RETURNS: -* Returns 0 to indicate success, otherwise -1 is returned -*/ - -static int serial_setopt (void) -{ - ulong con; - - switch ( ASC_OPTIONS & ASCOPT_CSIZE ) - { - /* 7-bit-data */ - case ASCOPT_CS7: - con = ASCCON_M_7ASYNCPAR; /* 7-bit-data and parity bit */ - break; - - /* 8-bit-data */ - case ASCOPT_CS8: - if ( ASC_OPTIONS & ASCOPT_PARENB ) - con = ASCCON_M_8ASYNCPAR; /* 8-bit-data and parity bit */ - else - con = ASCCON_M_8ASYNC; /* 8-bit-data no parity */ - break; - - /* - * only 7 and 8-bit frames are supported - * if we don't use IOCTL extensions - */ - default: - return -1; - } - - if ( ASC_OPTIONS & ASCOPT_STOPB ) - SET_BIT(con, ASCCON_STP); /* 2 stop bits */ - else - CLEAR_BIT(con, ASCCON_STP); /* 1 stop bit */ - - if ( ASC_OPTIONS & ASCOPT_PARENB ) - SET_BIT(con, ASCCON_PEN); /* enable parity checking */ - else - CLEAR_BIT(con, ASCCON_PEN); /* disable parity checking */ - - if ( ASC_OPTIONS & ASCOPT_PARODD ) - SET_BIT(con, ASCCON_ODD); /* odd parity */ - else - CLEAR_BIT(con, ASCCON_ODD); /* even parity */ - - if ( ASC_OPTIONS & ASCOPT_CREAD ) - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_SETREN); /* Receiver enable */ - - pAsc->asc_con |= con; - - return 0; -} - -static void asc_serial_putc(const char c) -{ - uint txFl = 0; - - if (c == '\n') serial_putc ('\r'); - - /* check do we have a free space in the TX FIFO */ - /* get current filling level */ - do - { - txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF; - } - while ( txFl == INCAASC_TXFIFO_FULL ); - - pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */ - - /* check for errors */ - if ( pAsc->asc_con & ASCCON_OE ) - { - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE); - return; - } -} - -static int asc_serial_getc(void) -{ - ulong symbol_mask; - char c; - - while (!serial_tstc()); - - symbol_mask = - ((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff); - - c = (char)(pAsc->asc_rbuf & symbol_mask); - - return c; -} - -static int asc_serial_tstc(void) -{ - int res = 1; - - if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 ) - { - res = 0; - } - else if ( pAsc->asc_con & ASCCON_FE ) - { - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE); - res = 0; - } - else if ( pAsc->asc_con & ASCCON_PE ) - { - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE); - res = 0; - } - else if ( pAsc->asc_con & ASCCON_OE ) - { - SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE); - res = 0; - } - - return res; -} - -static struct serial_device asc_serial_drv = { - .name = "asc_serial", - .start = asc_serial_init, - .stop = NULL, - .setbrg = asc_serial_setbrg, - .putc = asc_serial_putc, - .puts = default_serial_puts, - .getc = asc_serial_getc, - .tstc = asc_serial_tstc, -}; - -void asc_serial_initialize(void) -{ - serial_register(&asc_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &asc_serial_drv; -} diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.h b/arch/mips/cpu/mips32/incaip/asc_serial.h deleted file mode 100644 index 7ffdcfaf8b..0000000000 --- a/arch/mips/cpu/mips32/incaip/asc_serial.h +++ /dev/null @@ -1,177 +0,0 @@ -/* incaAscSio.h - (INCA) ASC UART tty driver header */ - -#ifndef __INCincaAscSioh -#define __INCincaAscSioh - -#include - -/* channel operating modes */ -#define ASCOPT_CSIZE 0x00000003 -#define ASCOPT_CS7 0x00000001 -#define ASCOPT_CS8 0x00000002 -#define ASCOPT_PARENB 0x00000004 -#define ASCOPT_STOPB 0x00000008 -#define ASCOPT_PARODD 0x00000010 -#define ASCOPT_CREAD 0x00000020 - -#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8) - -/* ASC input select (0 or 1) */ -#define CONSOLE_TTY 0 - -/* use fractional divider for baudrate settings */ -#define INCAASC_USE_FDV - -#ifdef INCAASC_USE_FDV - #define INCAASC_FDV_LOW_BAUDRATE 71 - #define INCAASC_FDV_HIGH_BAUDRATE 453 -#endif /*INCAASC_USE_FDV*/ - - -#define INCAASC_TXFIFO_FL 1 -#define INCAASC_RXFIFO_FL 1 -#define INCAASC_TXFIFO_FULL 16 - -/* interrupt lines masks for the ASC device interrupts*/ -/* change these macroses if it's necessary */ -#define INCAASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */ - -#define INCAASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */ -#define INCAASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */ -#define INCAASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */ -#define INCAASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/ - -/* interrupt controller access macros */ -#define ASC_INTERRUPTS_ENABLE(X) \ - *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) |= X; -#define ASC_INTERRUPTS_DISABLE(X) \ - *((volatile unsigned int*) INCA_IP_ICU_IM2_IER) &= ~X; -#define ASC_INTERRUPTS_CLEAR(X) \ - *((volatile unsigned int*) INCA_IP_ICU_IM2_ISR) = X; - -/* CLC register's bits and bitfields */ -#define ASCCLC_DISR 0x00000001 -#define ASCCLC_DISS 0x00000002 -#define ASCCLC_RMCMASK 0x0000FF00 -#define ASCCLC_RMCOFFSET 8 - -/* CON register's bits and bitfields */ -#define ASCCON_MODEMASK 0x0007 - #define ASCCON_M_8SYNC 0x0 - #define ASCCON_M_8ASYNC 0x1 - #define ASCCON_M_8IRDAASYNC 0x2 - #define ASCCON_M_7ASYNCPAR 0x3 - #define ASCCON_M_9ASYNC 0x4 - #define ASCCON_M_8WAKEUPASYNC 0x5 - #define ASCCON_M_8ASYNCPAR 0x7 -#define ASCCON_STP 0x0008 -#define ASCCON_REN 0x0010 -#define ASCCON_PEN 0x0020 -#define ASCCON_FEN 0x0040 -#define ASCCON_OEN 0x0080 -#define ASCCON_PE 0x0100 -#define ASCCON_FE 0x0200 -#define ASCCON_OE 0x0400 -#define ASCCON_FDE 0x0800 -#define ASCCON_ODD 0x1000 -#define ASCCON_BRS 0x2000 -#define ASCCON_LB 0x4000 -#define ASCCON_R 0x8000 - -/* WHBCON register's bits and bitfields */ -#define ASCWHBCON_CLRREN 0x0010 -#define ASCWHBCON_SETREN 0x0020 -#define ASCWHBCON_CLRPE 0x0100 -#define ASCWHBCON_CLRFE 0x0200 -#define ASCWHBCON_CLROE 0x0400 -#define ASCWHBCON_SETPE 0x0800 -#define ASCWHBCON_SETFE 0x1000 -#define ASCWHBCON_SETOE 0x2000 - -/* ABCON register's bits and bitfields */ -#define ASCABCON_ABEN 0x0001 -#define ASCABCON_AUREN 0x0002 -#define ASCABCON_ABSTEN 0x0004 -#define ASCABCON_ABDETEN 0x0008 -#define ASCABCON_FCDETEN 0x0010 -#define ASCABCON_EMMASK 0x0300 - #define ASCABCON_EMOFF 8 - #define ASCABCON_EM_DISAB 0x0 - #define ASCABCON_EM_DURAB 0x1 - #define ASCABCON_EM_ALWAYS 0x2 -#define ASCABCON_TXINV 0x0400 -#define ASCABCON_RXINV 0x0800 - -/* FDV register mask, offset and bitfields*/ -#define ASCFDV_VALUE_MASK 0x000001FF - -/* WHBABCON register's bits and bitfields */ -#define ASCWHBABCON_SETABEN 0x0001 -#define ASCWHBABCON_CLRABEN 0x0002 - -/* ABSTAT register's bits and bitfields */ -#define ASCABSTAT_FCSDET 0x0001 -#define ASCABSTAT_FCCDET 0x0002 -#define ASCABSTAT_SCSDET 0x0004 -#define ASCABSTAT_SCCDET 0x0008 -#define ASCABSTAT_DETWAIT 0x0010 - -/* WHBABSTAT register's bits and bitfields */ -#define ASCWHBABSTAT_CLRFCSDET 0x0001 -#define ASCWHBABSTAT_SETFCSDET 0x0002 -#define ASCWHBABSTAT_CLRFCCDET 0x0004 -#define ASCWHBABSTAT_SETFCCDET 0x0008 -#define ASCWHBABSTAT_CLRSCSDET 0x0010 -#define ASCWHBABSTAT_SETSCSDET 0x0020 -#define ASCWHBABSTAT_SETSCCDET 0x0040 -#define ASCWHBABSTAT_CLRSCCDET 0x0080 -#define ASCWHBABSTAT_CLRDETWAIT 0x0100 -#define ASCWHBABSTAT_SETDETWAIT 0x0200 - -/* TXFCON register's bits and bitfields */ -#define ASCTXFCON_TXFEN 0x0001 -#define ASCTXFCON_TXFFLU 0x0002 -#define ASCTXFCON_TXTMEN 0x0004 -#define ASCTXFCON_TXFITLMASK 0x3F00 -#define ASCTXFCON_TXFITLOFF 8 - -/* RXFCON register's bits and bitfields */ -#define ASCRXFCON_RXFEN 0x0001 -#define ASCRXFCON_RXFFLU 0x0002 -#define ASCRXFCON_RXTMEN 0x0004 -#define ASCRXFCON_RXFITLMASK 0x3F00 -#define ASCRXFCON_RXFITLOFF 8 - -/* FSTAT register's bits and bitfields */ -#define ASCFSTAT_RXFFLMASK 0x003F -#define ASCFSTAT_TXFFLMASK 0x3F00 -#define ASCFSTAT_TXFFLOFF 8 - -#define INCAASC_PMU_ENABLE(BIT) *((volatile ulong*)0xBF102000) |= (0x1 << BIT); - -typedef struct /* incaAsc_t */ -{ - volatile unsigned long asc_clc; /*0x0000*/ - volatile unsigned long asc_pisel; /*0x0004*/ - volatile unsigned long asc_rsvd1[2]; /* for mapping */ /*0x0008*/ - volatile unsigned long asc_con; /*0x0010*/ - volatile unsigned long asc_bg; /*0x0014*/ - volatile unsigned long asc_fdv; /*0x0018*/ - volatile unsigned long asc_pmw; /* not used */ /*0x001C*/ - volatile unsigned long asc_tbuf; /*0x0020*/ - volatile unsigned long asc_rbuf; /*0x0024*/ - volatile unsigned long asc_rsvd2[2]; /* for mapping */ /*0x0028*/ - volatile unsigned long asc_abcon; /*0x0030*/ - volatile unsigned long asc_abstat; /* not used */ /*0x0034*/ - volatile unsigned long asc_rsvd3[2]; /* for mapping */ /*0x0038*/ - volatile unsigned long asc_rxfcon; /*0x0040*/ - volatile unsigned long asc_txfcon; /*0x0044*/ - volatile unsigned long asc_fstat; /*0x0048*/ - volatile unsigned long asc_rsvd4; /* for mapping */ /*0x004C*/ - volatile unsigned long asc_whbcon; /*0x0050*/ - volatile unsigned long asc_whbabcon; /*0x0054*/ - volatile unsigned long asc_whbabstat; /* not used */ /*0x0058*/ - -} incaAsc_t; - -#endif /* __INCincaAscSioh */ diff --git a/arch/mips/cpu/mips32/incaip/config.mk b/arch/mips/cpu/mips32/incaip/config.mk deleted file mode 100644 index 5c89129d8c..0000000000 --- a/arch/mips/cpu/mips32/incaip/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2011 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -mtune=4kc diff --git a/arch/mips/cpu/mips32/incaip/incaip_clock.c b/arch/mips/cpu/mips32/incaip/incaip_clock.c deleted file mode 100644 index efada9f6f8..0000000000 --- a/arch/mips/cpu/mips32/incaip/incaip_clock.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - - -/******************************************************************************* -* -* get_cpuclk - returns the frequency of the CPU. -* -* Gets the value directly from the INCA-IP hardware. -* -* RETURNS: -* 150.000.000 for 150 MHz -* 133.333.333 for 133 MHz (= 400MHz/3) -* 100.000.000 for 100 MHz (= 400MHz/4) -* NOTE: -* This functions should be used by the hardware driver to get the correct -* frequency of the CPU. Don't use the macros, which are set to init the CPU -* frequency in the ROM code. -*/ -uint incaip_get_cpuclk (void) -{ - /*-------------------------------------------------------------------------*/ - /* CPU Clock Input Multiplexer (MUX I) */ - /* Multiplexer MUX I selects the maximum input clock to the CPU. */ - /*-------------------------------------------------------------------------*/ - if (*((volatile ulong *) INCA_IP_CGU_CGU_MUXCR) & - INCA_IP_CGU_CGU_MUXCR_MUXI) { - /* MUX I set to 150 MHz clock */ - return 150000000; - } else { - /* MUX I set to 100/133 MHz clock */ - if (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0x40) { - /* Division value is 1/3, maximum CPU operating */ - /* frequency is 133.3 MHz */ - return 133333333; - } else { - /* Division value is 1/4, maximum CPU operating */ - /* frequency is 100 MHz */ - return 100000000; - } - } -} - -/******************************************************************************* -* -* get_fpiclk - returns the frequency of the FPI bus. -* -* Gets the value directly from the INCA-IP hardware. -* -* RETURNS: Frquency in Hz -* -* NOTE: -* This functions should be used by the hardware driver to get the correct -* frequency of the CPU. Don't use the macros, which are set to init the CPU -* frequency in the ROM code. -* The calculation for the -*/ -uint incaip_get_fpiclk (void) -{ - uint clkCPU; - - clkCPU = incaip_get_cpuclk (); - - switch (*((volatile ulong *) INCA_IP_CGU_CGU_DIVCR) & 0xC) { - case 0x4: - return clkCPU >> 1; /* devided by 2 */ - break; - case 0x8: - return clkCPU >> 2; /* devided by 4 */ - break; - default: - return clkCPU; - break; - } -} - -int incaip_set_cpuclk (void) -{ - extern void ebu_init(long); - extern void cgu_init(long); - extern void sdram_init(long); - char tmp[64]; - ulong cpuclk; - - if (getenv_f("cpuclk", tmp, sizeof (tmp)) > 0) { - cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000; - cgu_init (cpuclk); - ebu_init (cpuclk); - sdram_init (cpuclk); - } - - return 0; -} diff --git a/arch/mips/cpu/mips32/incaip/incaip_wdt.S b/arch/mips/cpu/mips32/incaip/incaip_wdt.S deleted file mode 100644 index b15320a57c..0000000000 --- a/arch/mips/cpu/mips32/incaip/incaip_wdt.S +++ /dev/null @@ -1,55 +0,0 @@ -/* - * INCA-IP Watchdog timer management code. - * - * Copyright (c) 2003 Wolfgang Denk - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include -#include - - -#define WD_BASE 0xb8000000 -#define WD_CON0(value) 0x0020(value) -#define WD_CON1(value) 0x0024(value) -#define WD_DISABLE 0x00000008 -#define WD_ENABLE 0x00000000 -#define WD_WRITE_PW 0xFFFC00F8 -#define WD_WRITE_ENDINIT 0xFFFC00F3 -#define WD_WRITE_INIT 0xFFFC00F2 - - - .globl disable_incaip_wdt -disable_incaip_wdt: - li t0, WD_BASE - - /* Calculate password. - */ - lw t2, WD_CON1(t0) - and t2, 0xC - - lw t3, WD_CON0(t0) - and t3, 0xFFFFFF01 - - or t3, t2 - or t3, 0xF0 - - sw t3, WD_CON0(t0) /* write password */ - - /* Clear ENDINIT. - */ - li t1, WD_WRITE_INIT - sw t1, WD_CON0(t0) - - - li t1, WD_DISABLE - sw t1, WD_CON1(t0) /* disable watchdog */ - li t1, WD_WRITE_PW - sw t1, WD_CON0(t0) /* write password */ - li t1, WD_WRITE_ENDINIT - sw t1, WD_CON0(t0) /* end command */ - - jr ra - nop diff --git a/arch/mips/include/asm/inca-ip.h b/arch/mips/include/asm/inca-ip.h deleted file mode 100644 index 5f03e2aa20..0000000000 --- a/arch/mips/include/asm/inca-ip.h +++ /dev/null @@ -1,2430 +0,0 @@ -/****************************************************************************** - Copyright (c) 2002, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. -******************************************************************************/ - - -/***********************************************************************/ -/* Module : WDT register address and bits */ -/***********************************************************************/ - -#define INCA_IP_WDT (0xB8000000) -/***********************************************************************/ - - -/***Reset Status Register Power On***/ -#define INCA_IP_WDT_RST_SR ((volatile u32*)(INCA_IP_WDT+ 0x0014)) - -/***Reset Request Register***/ -#define INCA_IP_WDT_RST_REQ ((volatile u32*)(INCA_IP_WDT+ 0x0010)) -#define INCA_IP_WDT_RST_REQ_SWBOOT (1 << 24) -#define INCA_IP_WDT_RST_REQ_SWCFG (1 << 16) -#define INCA_IP_WDT_RST_REQ_RRPHY (1 << 5) -#define INCA_IP_WDT_RST_REQ_RRHSP (1 << 4) -#define INCA_IP_WDT_RST_REQ_RRFPI (1 << 3) -#define INCA_IP_WDT_RST_REQ_RREXT (1 << 2) -#define INCA_IP_WDT_RST_REQ_RRDSP (1 << 1) -#define INCA_IP_WDT_RST_REQ_RRCPU (1 << 0) - -/***NMI Status Register***/ -#define INCA_IP_WDT_NMISR ((volatile u32*)(INCA_IP_WDT+ 0x002C)) -#define INCA_IP_WDT_NMISR_NMIWDT (1 << 2) -#define INCA_IP_WDT_NMISR_NMIPLL (1 << 1) -#define INCA_IP_WDT_NMISR_NMIEXT (1 << 0) - -/***Manufacturer Identification Register***/ -#define INCA_IP_WDT_MANID ((volatile u32*)(INCA_IP_WDT+ 0x0070)) -#define INCA_IP_WDT_MANID_MANUF (value) (((( 1 << 11) - 1) & (value)) << 5) - -/***Chip Identification Register***/ -#define INCA_IP_WDT_CHIPID ((volatile u32*)(INCA_IP_WDT+ 0x0074)) -#define INCA_IP_WDT_CHIPID_VERSION (value) (((( 1 << 4) - 1) & (value)) << 28) -#define INCA_IP_WDT_CHIPID_PART_NUMBER (value) (((( 1 << 16) - 1) & (value)) << 12) -#define INCA_IP_WDT_CHIPID_MANID (value) (((( 1 << 11) - 1) & (value)) << 1) - -/***Redesign Tracing Identification Register***/ -#define INCA_IP_WDT_RTID ((volatile u32*)(INCA_IP_WDT+ 0x0078)) -#define INCA_IP_WDT_RTID_LC (1 << 15) -#define INCA_IP_WDT_RTID_RIX (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Watchdog Timer Control Register 0***/ -#define INCA_IP_WDT_WDT_CON0 ((volatile u32*)(INCA_IP_WDT+ 0x0020)) - -/***Watchdog Timer Control Register 1***/ -#define INCA_IP_WDT_WDT_CON1 ((volatile u32*)(INCA_IP_WDT+ 0x0024)) -#define INCA_IP_WDT_WDT_CON1_WDTDR (1 << 3) -#define INCA_IP_WDT_WDT_CON1_WDTIR (1 << 2) - -/***Watchdog Timer Status Register***/ -#define INCA_IP_WDT_WDT_SR ((volatile u32*)(INCA_IP_WDT+ 0x0028)) -#define INCA_IP_WDT_WDT_SR_WDTTIM (value) (((( 1 << 16) - 1) & (value)) << 16) -#define INCA_IP_WDT_WDT_SR_WDTPR (1 << 5) -#define INCA_IP_WDT_WDT_SR_WDTTO (1 << 4) -#define INCA_IP_WDT_WDT_SR_WDTDS (1 << 3) -#define INCA_IP_WDT_WDT_SR_WDTIS (1 << 2) -#define INCA_IP_WDT_WDT_SR_WDTOE (1 << 1) -#define INCA_IP_WDT_WDT_SR_WDTAE (1 << 0) - -/***********************************************************************/ -/* Module : CGU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_CGU (0xBF107000) -/***********************************************************************/ - - -/***CGU PLL1 Control Register***/ -#define INCA_IP_CGU_CGU_PLL1CR ((volatile u32*)(INCA_IP_CGU+ 0x0008)) -#define INCA_IP_CGU_CGU_PLL1CR_SWRST (1 << 31) -#define INCA_IP_CGU_CGU_PLL1CR_EN (1 << 30) -#define INCA_IP_CGU_CGU_PLL1CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16) -#define INCA_IP_CGU_CGU_PLL1CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***CGU PLL0 Control Register***/ -#define INCA_IP_CGU_CGU_PLL0CR ((volatile u32*)(INCA_IP_CGU+ 0x0000)) -#define INCA_IP_CGU_CGU_PLL0CR_SWRST (1 << 31) -#define INCA_IP_CGU_CGU_PLL0CR_EN (1 << 30) -#define INCA_IP_CGU_CGU_PLL0CR_NDIV (value) (((( 1 << 6) - 1) & (value)) << 16) -#define INCA_IP_CGU_CGU_PLL0CR_MDIV (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***CGU PLL0 Status Register***/ -#define INCA_IP_CGU_CGU_PLL0SR ((volatile u32*)(INCA_IP_CGU+ 0x0004)) -#define INCA_IP_CGU_CGU_PLL0SR_LOCK (1 << 31) -#define INCA_IP_CGU_CGU_PLL0SR_RCF (1 << 29) -#define INCA_IP_CGU_CGU_PLL0SR_PLLBYP (1 << 15) - -/***CGU PLL1 Status Register***/ -#define INCA_IP_CGU_CGU_PLL1SR ((volatile u32*)(INCA_IP_CGU+ 0x000C)) -#define INCA_IP_CGU_CGU_PLL1SR_LOCK (1 << 31) -#define INCA_IP_CGU_CGU_PLL1SR_RCF (1 << 29) -#define INCA_IP_CGU_CGU_PLL1SR_PLLBYP (1 << 15) - -/***CGU Divider Control Register***/ -#define INCA_IP_CGU_CGU_DIVCR ((volatile u32*)(INCA_IP_CGU+ 0x0010)) - -/***CGU Multiplexer Control Register***/ -#define INCA_IP_CGU_CGU_MUXCR ((volatile u32*)(INCA_IP_CGU+ 0x0014)) -#define INCA_IP_CGU_CGU_MUXCR_SWRST (1 << 31) -#define INCA_IP_CGU_CGU_MUXCR_MUXII (1 << 1) -#define INCA_IP_CGU_CGU_MUXCR_MUXI (1 << 0) - -/***CGU Fractional Divider Control Register***/ -#define INCA_IP_CGU_CGU_FDCR ((volatile u32*)(INCA_IP_CGU+ 0x0018)) -#define INCA_IP_CGU_CGU_FDCR_FDEN (1 << 31) -#define INCA_IP_CGU_CGU_FDCR_INTEGER (value) (((( 1 << 12) - 1) & (value)) << 16) -#define INCA_IP_CGU_CGU_FDCR_FRACTION (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : PMU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_PMU (0xBF102000) -/***********************************************************************/ - - -/***PM Global Enable Register***/ -#define INCA_IP_PMU_PM_GEN ((volatile u32*)(INCA_IP_PMU+ 0x0000)) -#define INCA_IP_PMU_PM_GEN_EN16 (1 << 16) -#define INCA_IP_PMU_PM_GEN_EN15 (1 << 15) -#define INCA_IP_PMU_PM_GEN_EN14 (1 << 14) -#define INCA_IP_PMU_PM_GEN_EN13 (1 << 13) -#define INCA_IP_PMU_PM_GEN_EN12 (1 << 12) -#define INCA_IP_PMU_PM_GEN_EN11 (1 << 11) -#define INCA_IP_PMU_PM_GEN_EN10 (1 << 10) -#define INCA_IP_PMU_PM_GEN_EN9 (1 << 9) -#define INCA_IP_PMU_PM_GEN_EN8 (1 << 8) -#define INCA_IP_PMU_PM_GEN_EN7 (1 << 7) -#define INCA_IP_PMU_PM_GEN_EN6 (1 << 6) -#define INCA_IP_PMU_PM_GEN_EN5 (1 << 5) -#define INCA_IP_PMU_PM_GEN_EN4 (1 << 4) -#define INCA_IP_PMU_PM_GEN_EN3 (1 << 3) -#define INCA_IP_PMU_PM_GEN_EN2 (1 << 2) -#define INCA_IP_PMU_PM_GEN_EN0 (1 << 0) - -/***PM Power Down Enable Register***/ -#define INCA_IP_PMU_PM_PDEN ((volatile u32*)(INCA_IP_PMU+ 0x0008)) -#define INCA_IP_PMU_PM_PDEN_EN16 (1 << 16) -#define INCA_IP_PMU_PM_PDEN_EN15 (1 << 15) -#define INCA_IP_PMU_PM_PDEN_EN14 (1 << 14) -#define INCA_IP_PMU_PM_PDEN_EN13 (1 << 13) -#define INCA_IP_PMU_PM_PDEN_EN12 (1 << 12) -#define INCA_IP_PMU_PM_PDEN_EN11 (1 << 11) -#define INCA_IP_PMU_PM_PDEN_EN10 (1 << 10) -#define INCA_IP_PMU_PM_PDEN_EN9 (1 << 9) -#define INCA_IP_PMU_PM_PDEN_EN8 (1 << 8) -#define INCA_IP_PMU_PM_PDEN_EN7 (1 << 7) -#define INCA_IP_PMU_PM_PDEN_EN5 (1 << 5) -#define INCA_IP_PMU_PM_PDEN_EN4 (1 << 4) -#define INCA_IP_PMU_PM_PDEN_EN3 (1 << 3) -#define INCA_IP_PMU_PM_PDEN_EN2 (1 << 2) -#define INCA_IP_PMU_PM_PDEN_EN0 (1 << 0) - -/***PM Wake-Up from Power Down Register***/ -#define INCA_IP_PMU_PM_WUP ((volatile u32*)(INCA_IP_PMU+ 0x0010)) -#define INCA_IP_PMU_PM_WUP_WUP16 (1 << 16) -#define INCA_IP_PMU_PM_WUP_WUP15 (1 << 15) -#define INCA_IP_PMU_PM_WUP_WUP14 (1 << 14) -#define INCA_IP_PMU_PM_WUP_WUP13 (1 << 13) -#define INCA_IP_PMU_PM_WUP_WUP12 (1 << 12) -#define INCA_IP_PMU_PM_WUP_WUP11 (1 << 11) -#define INCA_IP_PMU_PM_WUP_WUP10 (1 << 10) -#define INCA_IP_PMU_PM_WUP_WUP9 (1 << 9) -#define INCA_IP_PMU_PM_WUP_WUP8 (1 << 8) -#define INCA_IP_PMU_PM_WUP_WUP7 (1 << 7) -#define INCA_IP_PMU_PM_WUP_WUP5 (1 << 5) -#define INCA_IP_PMU_PM_WUP_WUP4 (1 << 4) -#define INCA_IP_PMU_PM_WUP_WUP3 (1 << 3) -#define INCA_IP_PMU_PM_WUP_WUP2 (1 << 2) -#define INCA_IP_PMU_PM_WUP_WUP0 (1 << 0) - -/***PM Control Register***/ -#define INCA_IP_PMU_PM_CR ((volatile u32*)(INCA_IP_PMU+ 0x0014)) -#define INCA_IP_PMU_PM_CR_AWEN (1 << 31) -#define INCA_IP_PMU_PM_CR_SWRST (1 << 30) -#define INCA_IP_PMU_PM_CR_SWCR (1 << 2) -#define INCA_IP_PMU_PM_CR_CRD (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : BCU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_BCU (0xB8000100) -/***********************************************************************/ - - -/***BCU Control Register (0010H)***/ -#define INCA_IP_BCU_BCU_CON ((volatile u32*)(INCA_IP_BCU+ 0x0010)) -#define INCA_IP_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_BCU_BCU_CON_SPE (1 << 19) -#define INCA_IP_BCU_BCU_CON_PSE (1 << 18) -#define INCA_IP_BCU_BCU_CON_DBG (1 << 16) -#define INCA_IP_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***BCU Error Control Capture Register (0020H)***/ -#define INCA_IP_BCU_BCU_ECON ((volatile u32*)(INCA_IP_BCU+ 0x0020)) -#define INCA_IP_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24) -#define INCA_IP_BCU_BCU_ECON_RDN (1 << 23) -#define INCA_IP_BCU_BCU_ECON_WRN (1 << 22) -#define INCA_IP_BCU_BCU_ECON_SVM (1 << 21) -#define INCA_IP_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19) -#define INCA_IP_BCU_BCU_ECON_ABT (1 << 18) -#define INCA_IP_BCU_BCU_ECON_RDY (1 << 17) -#define INCA_IP_BCU_BCU_ECON_TOUT (1 << 16) -#define INCA_IP_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0) -#define INCA_IP_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28) - -/***BCU Error Address Capture Register (0024 H)***/ -#define INCA_IP_BCU_BCU_EADD ((volatile u32*)(INCA_IP_BCU+ 0x0024)) -#define INCA_IP_BCU_BCU_EADD_FPIADR - -/***BCU Error Data Capture Register (0028H)***/ -#define INCA_IP_BCU_BCU_EDAT ((volatile u32*)(INCA_IP_BCU+ 0x0028)) -#define INCA_IP_BCU_BCU_EDAT_FPIDAT - -/***********************************************************************/ -/* Module : MBC register address and bits */ -/***********************************************************************/ - -#define INCA_IP_MBC (0xBF103000) -/***********************************************************************/ - - -/***Mailbox CPU Configuration Register***/ -#define INCA_IP_MBC_MBC_CFG ((volatile u32*)(INCA_IP_MBC+ 0x0080)) -#define INCA_IP_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_MBC_MBC_CFG_RES (1 << 5) -#define INCA_IP_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1) -#define INCA_IP_MBC_MBC_CFG_SIZE (1 << 0) - -/***Mailbox CPU Interrupt Status Register***/ -#define INCA_IP_MBC_MBC_ISR ((volatile u32*)(INCA_IP_MBC+ 0x0084)) -#define INCA_IP_MBC_MBC_ISR_B3DA (1 << 31) -#define INCA_IP_MBC_MBC_ISR_B2DA (1 << 30) -#define INCA_IP_MBC_MBC_ISR_B1E (1 << 29) -#define INCA_IP_MBC_MBC_ISR_B0E (1 << 28) -#define INCA_IP_MBC_MBC_ISR_WDT (1 << 27) -#define INCA_IP_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Mask Register***/ -#define INCA_IP_MBC_MBC_MSK ((volatile u32*)(INCA_IP_MBC+ 0x0088)) -#define INCA_IP_MBC_MBC_MSK_B3DA (1 << 31) -#define INCA_IP_MBC_MBC_MSK_B2DA (1 << 30) -#define INCA_IP_MBC_MBC_MSK_B1E (1 << 29) -#define INCA_IP_MBC_MBC_MSK_B0E (1 << 28) -#define INCA_IP_MBC_MBC_MSK_WDT (1 << 27) -#define INCA_IP_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Mask 01 Register***/ -#define INCA_IP_MBC_MBC_MSK01 ((volatile u32*)(INCA_IP_MBC+ 0x008C)) -#define INCA_IP_MBC_MBC_MSK01_B3DA (1 << 31) -#define INCA_IP_MBC_MBC_MSK01_B2DA (1 << 30) -#define INCA_IP_MBC_MBC_MSK01_B1E (1 << 29) -#define INCA_IP_MBC_MBC_MSK01_B0E (1 << 28) -#define INCA_IP_MBC_MBC_MSK01_WDT (1 << 27) -#define INCA_IP_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Mask 10 Register***/ -#define INCA_IP_MBC_MBC_MSK10 ((volatile u32*)(INCA_IP_MBC+ 0x0090)) -#define INCA_IP_MBC_MBC_MSK10_B3DA (1 << 31) -#define INCA_IP_MBC_MBC_MSK10_B2DA (1 << 30) -#define INCA_IP_MBC_MBC_MSK10_B1E (1 << 29) -#define INCA_IP_MBC_MBC_MSK10_B0E (1 << 28) -#define INCA_IP_MBC_MBC_MSK10_WDT (1 << 27) -#define INCA_IP_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0) - -/***Mailbox CPU Short Command Register***/ -#define INCA_IP_MBC_MBC_CMD ((volatile u32*)(INCA_IP_MBC+ 0x0094)) -#define INCA_IP_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***Mailbox CPU Input Data of Buffer 0***/ -#define INCA_IP_MBC_MBC_ID0 ((volatile u32*)(INCA_IP_MBC+ 0x0000)) -#define INCA_IP_MBC_MBC_ID0_INDATA - -/***Mailbox CPU Input Data of Buffer 1***/ -#define INCA_IP_MBC_MBC_ID1 ((volatile u32*)(INCA_IP_MBC+ 0x0020)) -#define INCA_IP_MBC_MBC_ID1_INDATA - -/***Mailbox CPU Output Data of Buffer 2***/ -#define INCA_IP_MBC_MBC_OD2 ((volatile u32*)(INCA_IP_MBC+ 0x0040)) -#define INCA_IP_MBC_MBC_OD2_OUTDATA - -/***Mailbox CPU Output Data of Buffer 3***/ -#define INCA_IP_MBC_MBC_OD3 ((volatile u32*)(INCA_IP_MBC+ 0x0060)) -#define INCA_IP_MBC_MBC_OD3_OUTDATA - -/***Mailbox CPU Control Register of Buffer 0***/ -#define INCA_IP_MBC_MBC_CR0 ((volatile u32*)(INCA_IP_MBC+ 0x0004)) -#define INCA_IP_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Control Register of Buffer 1***/ -#define INCA_IP_MBC_MBC_CR1 ((volatile u32*)(INCA_IP_MBC+ 0x0024)) -#define INCA_IP_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Control Register of Buffer 2***/ -#define INCA_IP_MBC_MBC_CR2 ((volatile u32*)(INCA_IP_MBC+ 0x0044)) -#define INCA_IP_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Control Register of Buffer 3***/ -#define INCA_IP_MBC_MBC_CR3 ((volatile u32*)(INCA_IP_MBC+ 0x0064)) -#define INCA_IP_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***Mailbox CPU Free Space of Buffer 0***/ -#define INCA_IP_MBC_MBC_FS0 ((volatile u32*)(INCA_IP_MBC+ 0x0008)) -#define INCA_IP_MBC_MBC_FS0_FS - -/***Mailbox CPU Free Space of Buffer 1***/ -#define INCA_IP_MBC_MBC_FS1 ((volatile u32*)(INCA_IP_MBC+ 0x0028)) -#define INCA_IP_MBC_MBC_FS1_FS - -/***Mailbox CPU Free Space of Buffer 2***/ -#define INCA_IP_MBC_MBC_FS2 ((volatile u32*)(INCA_IP_MBC+ 0x0048)) -#define INCA_IP_MBC_MBC_FS2_FS - -/***Mailbox CPU Free Space of Buffer 3***/ -#define INCA_IP_MBC_MBC_FS3 ((volatile u32*)(INCA_IP_MBC+ 0x0068)) -#define INCA_IP_MBC_MBC_FS3_FS - -/***Mailbox CPU Data Available in Buffer 0***/ -#define INCA_IP_MBC_MBC_DA0 ((volatile u32*)(INCA_IP_MBC+ 0x000C)) -#define INCA_IP_MBC_MBC_DA0_DA - -/***Mailbox CPU Data Available in Buffer 1***/ -#define INCA_IP_MBC_MBC_DA1 ((volatile u32*)(INCA_IP_MBC+ 0x002C)) -#define INCA_IP_MBC_MBC_DA1_DA - -/***Mailbox CPU Data Available in Buffer 2***/ -#define INCA_IP_MBC_MBC_DA2 ((volatile u32*)(INCA_IP_MBC+ 0x004C)) -#define INCA_IP_MBC_MBC_DA2_DA - -/***Mailbox CPU Data Available in Buffer 3***/ -#define INCA_IP_MBC_MBC_DA3 ((volatile u32*)(INCA_IP_MBC+ 0x006C)) -#define INCA_IP_MBC_MBC_DA3_DA - -/***Mailbox CPU Input Absolute Pointer of Buffer 0***/ -#define INCA_IP_MBC_MBC_IABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0010)) -#define INCA_IP_MBC_MBC_IABS0_IABS - -/***Mailbox CPU Input Absolute Pointer of Buffer 1***/ -#define INCA_IP_MBC_MBC_IABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0030)) -#define INCA_IP_MBC_MBC_IABS1_IABS - -/***Mailbox CPU Input Absolute Pointer of Buffer 2***/ -#define INCA_IP_MBC_MBC_IABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0050)) -#define INCA_IP_MBC_MBC_IABS2_IABS - -/***Mailbox CPU Input Absolute Pointer of Buffer 3***/ -#define INCA_IP_MBC_MBC_IABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0070)) -#define INCA_IP_MBC_MBC_IABS3_IABS - -/***Mailbox CPU Input Temporary Pointer of Buffer 0***/ -#define INCA_IP_MBC_MBC_ITMP0 ((volatile u32*)(INCA_IP_MBC+ 0x0014)) -#define INCA_IP_MBC_MBC_ITMP0_ITMP - -/***Mailbox CPU Input Temporary Pointer of Buffer 1***/ -#define INCA_IP_MBC_MBC_ITMP1 ((volatile u32*)(INCA_IP_MBC+ 0x0034)) -#define INCA_IP_MBC_MBC_ITMP1_ITMP - -/***Mailbox CPU Input Temporary Pointer of Buffer 2***/ -#define INCA_IP_MBC_MBC_ITMP2 ((volatile u32*)(INCA_IP_MBC+ 0x0054)) -#define INCA_IP_MBC_MBC_ITMP2_ITMP - -/***Mailbox CPU Input Temporary Pointer of Buffer 3***/ -#define INCA_IP_MBC_MBC_ITMP3 ((volatile u32*)(INCA_IP_MBC+ 0x0074)) -#define INCA_IP_MBC_MBC_ITMP3_ITMP - -/***Mailbox CPU Output Absolute Pointer of Buffer 0***/ -#define INCA_IP_MBC_MBC_OABS0 ((volatile u32*)(INCA_IP_MBC+ 0x0018)) -#define INCA_IP_MBC_MBC_OABS0_OABS - -/***Mailbox CPU Output Absolute Pointer of Buffer 1***/ -#define INCA_IP_MBC_MBC_OABS1 ((volatile u32*)(INCA_IP_MBC+ 0x0038)) -#define INCA_IP_MBC_MBC_OABS1_OABS - -/***Mailbox CPU Output Absolute Pointer of Buffer 2***/ -#define INCA_IP_MBC_MBC_OABS2 ((volatile u32*)(INCA_IP_MBC+ 0x0058)) -#define INCA_IP_MBC_MBC_OABS2_OABS - -/***Mailbox CPU Output Absolute Pointer of Buffer 3***/ -#define INCA_IP_MBC_MBC_OABS3 ((volatile u32*)(INCA_IP_MBC+ 0x0078)) -#define INCA_IP_MBC_MBC_OABS3_OABS - -/***Mailbox CPU Output Temporary Pointer of Buffer 0***/ -#define INCA_IP_MBC_MBC_OTMP0 ((volatile u32*)(INCA_IP_MBC+ 0x001C)) -#define INCA_IP_MBC_MBC_OTMP0_OTMP - -/***Mailbox CPU Output Temporary Pointer of Buffer 1***/ -#define INCA_IP_MBC_MBC_OTMP1 ((volatile u32*)(INCA_IP_MBC+ 0x003C)) -#define INCA_IP_MBC_MBC_OTMP1_OTMP - -/***Mailbox CPU Output Temporary Pointer of Buffer 2***/ -#define INCA_IP_MBC_MBC_OTMP2 ((volatile u32*)(INCA_IP_MBC+ 0x005C)) -#define INCA_IP_MBC_MBC_OTMP2_OTMP - -/***Mailbox CPU Output Temporary Pointer of Buffer 3***/ -#define INCA_IP_MBC_MBC_OTMP3 ((volatile u32*)(INCA_IP_MBC+ 0x007C)) -#define INCA_IP_MBC_MBC_OTMP3_OTMP - -/***DSP Control Register***/ -#define INCA_IP_MBC_DCTRL ((volatile u32*)(INCA_IP_MBC+ 0x00A0)) -#define INCA_IP_MBC_DCTRL_BA (1 << 0) -#define INCA_IP_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1) -#define INCA_IP_MBC_DCTRL_IDL (1 << 4) -#define INCA_IP_MBC_DCTRL_RES (1 << 15) - -/***DSP Status Register***/ -#define INCA_IP_MBC_DSTA ((volatile u32*)(INCA_IP_MBC+ 0x00A4)) -#define INCA_IP_MBC_DSTA_IDLE (1 << 0) -#define INCA_IP_MBC_DSTA_PD (1 << 1) - -/***DSP Test 1 Register***/ -#define INCA_IP_MBC_DTST1 ((volatile u32*)(INCA_IP_MBC+ 0x00A8)) -#define INCA_IP_MBC_DTST1_ABORT (1 << 0) -#define INCA_IP_MBC_DTST1_HWF32 (1 << 1) -#define INCA_IP_MBC_DTST1_HWF4M (1 << 2) -#define INCA_IP_MBC_DTST1_HWFOP (1 << 3) - -/***********************************************************************/ -/* Module : Switch register address and bits */ -/***********************************************************************/ - -#define INCA_IP_Switch (0xBF104000) -/***********************************************************************/ - - -/***Unknown Destination Register***/ -#define INCA_IP_Switch_UN_DEST ((volatile u32*)(INCA_IP_Switch+ 0x0000)) -#define INCA_IP_Switch_UN_DEST_CB (1 << 8) -#define INCA_IP_Switch_UN_DEST_LB (1 << 7) -#define INCA_IP_Switch_UN_DEST_PB (1 << 6) -#define INCA_IP_Switch_UN_DEST_CM (1 << 5) -#define INCA_IP_Switch_UN_DEST_LM (1 << 4) -#define INCA_IP_Switch_UN_DEST_PM (1 << 3) -#define INCA_IP_Switch_UN_DEST_CU (1 << 2) -#define INCA_IP_Switch_UN_DEST_LU (1 << 1) -#define INCA_IP_Switch_UN_DEST_PU (1 << 0) - -/***VLAN Control Register***/ -#define INCA_IP_Switch_VLAN_CTRL ((volatile u32*)(INCA_IP_Switch+ 0x0004)) -#define INCA_IP_Switch_VLAN_CTRL_SC (1 << 6) -#define INCA_IP_Switch_VLAN_CTRL_SL (1 << 5) -#define INCA_IP_Switch_VLAN_CTRL_SP (1 << 4) -#define INCA_IP_Switch_VLAN_CTRL_TC (1 << 3) -#define INCA_IP_Switch_VLAN_CTRL_TL (1 << 2) -#define INCA_IP_Switch_VLAN_CTRL_TP (1 << 1) -#define INCA_IP_Switch_VLAN_CTRL_VA (1 << 0) - -/***PC VLAN Configuration Register***/ -#define INCA_IP_Switch_PC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0008)) -#define INCA_IP_Switch_PC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_Switch_PC_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0) - -/***LAN VLAN Configuration Register***/ -#define INCA_IP_Switch_LAN_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x000C)) -#define INCA_IP_Switch_LAN_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_Switch_LAN_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0) - -/***CPU VLAN Configuration Register***/ -#define INCA_IP_Switch_CPU_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0010)) -#define INCA_IP_Switch_CPU_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_Switch_CPU_VLAN_VLAN_ID (value) (((( 1 << 12) - 1) & (value)) << 0) - -/***Priority CoS Mapping Register***/ -#define INCA_IP_Switch_PRI_CoS ((volatile u32*)(INCA_IP_Switch+ 0x0014)) -#define INCA_IP_Switch_PRI_CoS_P7 (1 << 7) -#define INCA_IP_Switch_PRI_CoS_P6 (1 << 6) -#define INCA_IP_Switch_PRI_CoS_P5 (1 << 5) -#define INCA_IP_Switch_PRI_CoS_P4 (1 << 4) -#define INCA_IP_Switch_PRI_CoS_P3 (1 << 3) -#define INCA_IP_Switch_PRI_CoS_P2 (1 << 2) -#define INCA_IP_Switch_PRI_CoS_P1 (1 << 1) -#define INCA_IP_Switch_PRI_CoS_P0 (1 << 0) - -/***Spanning Tree Port Status Register***/ -#define INCA_IP_Switch_ST_PT ((volatile u32*)(INCA_IP_Switch+ 0x0018)) -#define INCA_IP_Switch_ST_PT_CPS (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_Switch_ST_PT_LPS (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_Switch_ST_PT_PPS (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***ARL Control Register***/ -#define INCA_IP_Switch_ARL_CTL ((volatile u32*)(INCA_IP_Switch+ 0x001C)) -#define INCA_IP_Switch_ARL_CTL_CHCC (1 << 15) -#define INCA_IP_Switch_ARL_CTL_CHCL (1 << 14) -#define INCA_IP_Switch_ARL_CTL_CHCP (1 << 13) -#define INCA_IP_Switch_ARL_CTL_CC (1 << 12) -#define INCA_IP_Switch_ARL_CTL_CL (1 << 11) -#define INCA_IP_Switch_ARL_CTL_CP (1 << 10) -#define INCA_IP_Switch_ARL_CTL_CG (1 << 9) -#define INCA_IP_Switch_ARL_CTL_PS (1 << 8) -#define INCA_IP_Switch_ARL_CTL_MRO (1 << 7) -#define INCA_IP_Switch_ARL_CTL_SRC (1 << 6) -#define INCA_IP_Switch_ARL_CTL_ATS (1 << 5) -#define INCA_IP_Switch_ARL_CTL_AGE_TICK_SEL (value) (((( 1 << 3) - 1) & (value)) << 2) -#define INCA_IP_Switch_ARL_CTL_MAF (1 << 1) -#define INCA_IP_Switch_ARL_CTL_ENL (1 << 0) -#define INCA_IP_Switch_ARL_CTL_Res (value) (((( 1 << 19) - 1) & (value)) << 13) - -/***CPU Access Control Register***/ -#define INCA_IP_Switch_CPU_ACTL ((volatile u32*)(INCA_IP_Switch+ 0x0020)) -#define INCA_IP_Switch_CPU_ACTL_RA (1 << 31) -#define INCA_IP_Switch_CPU_ACTL_RW (1 << 30) -#define INCA_IP_Switch_CPU_ACTL_Res (value) (((( 1 << 21) - 1) & (value)) << 9) -#define INCA_IP_Switch_CPU_ACTL_AVA (1 << 8) -#define INCA_IP_Switch_CPU_ACTL_IDX (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***CPU Access Data Register 1***/ -#define INCA_IP_Switch_DATA1 ((volatile u32*)(INCA_IP_Switch+ 0x0024)) -#define INCA_IP_Switch_DATA1_Data (value) (((( 1 << 24) - 1) & (value)) << 0) - -/***CPU Access Data Register 2***/ -#define INCA_IP_Switch_DATA2 ((volatile u32*)(INCA_IP_Switch+ 0x0028)) -#define INCA_IP_Switch_DATA2_Data - -/***CPU Port Control Register***/ -#define INCA_IP_Switch_CPU_PCTL ((volatile u32*)(INCA_IP_Switch+ 0x002C)) -#define INCA_IP_Switch_CPU_PCTL_DA_PORTS (value) (((( 1 << 3) - 1) & (value)) << 11) -#define INCA_IP_Switch_CPU_PCTL_DAC (1 << 10) -#define INCA_IP_Switch_CPU_PCTL_MA_STATE (value) (((( 1 << 3) - 1) & (value)) << 7) -#define INCA_IP_Switch_CPU_PCTL_MAM (1 << 6) -#define INCA_IP_Switch_CPU_PCTL_MA_Ports (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_Switch_CPU_PCTL_MAC (1 << 2) -#define INCA_IP_Switch_CPU_PCTL_EML (1 << 1) -#define INCA_IP_Switch_CPU_PCTL_EDL (1 << 0) -#define INCA_IP_Switch_CPU_PCTL_Res (value) (((( 1 << 18) - 1) & (value)) << 14) - -/***DSCP CoS Mapping Register 1***/ -#define INCA_IP_Switch_DSCP_COS1 ((volatile u32*)(INCA_IP_Switch+ 0x0030)) -#define INCA_IP_Switch_DSCP_COS1_DSCP - -/***DSCP CoS Mapping Register 1***/ -#define INCA_IP_Switch_DSCP_COS2 ((volatile u32*)(INCA_IP_Switch+ 0x0034)) -#define INCA_IP_Switch_DSCP_COS2_DSCP - -/***PC WFQ Control Register***/ -#define INCA_IP_Switch_PC_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0080)) -#define INCA_IP_Switch_PC_WFQ_CTL_P1 (1 << 9) -#define INCA_IP_Switch_PC_WFQ_CTL_P0 (1 << 8) -#define INCA_IP_Switch_PC_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5) -#define INCA_IP_Switch_PC_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2) -#define INCA_IP_Switch_PC_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***PC TX Control Register***/ -#define INCA_IP_Switch_PC_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0084)) -#define INCA_IP_Switch_PC_TX_CTL_ELR (1 << 1) -#define INCA_IP_Switch_PC_TX_CTL_EER (1 << 0) - -/***LAN WFQ Control Register***/ -#define INCA_IP_Switch_LAN_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0100)) -#define INCA_IP_Switch_LAN_WFQ_CTL_P1 (1 << 9) -#define INCA_IP_Switch_LAN_WFQ_CTL_P0 (1 << 8) -#define INCA_IP_Switch_LAN_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5) -#define INCA_IP_Switch_LAN_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2) -#define INCA_IP_Switch_LAN_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***LAN TX Control Register***/ -#define INCA_IP_Switch_LAN_TX_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0104)) -#define INCA_IP_Switch_LAN_TX_CTL_ELR (1 << 1) -#define INCA_IP_Switch_LAN_TX_CTL_EER (1 << 0) - -/***CPU WFQ Control Register***/ -#define INCA_IP_Switch_CPU_WFQ_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0180)) -#define INCA_IP_Switch_CPU_WFQ_CTL_P1 (1 << 9) -#define INCA_IP_Switch_CPU_WFQ_CTL_P0 (1 << 8) -#define INCA_IP_Switch_CPU_WFQ_CTL_WT1 (value) (((( 1 << 3) - 1) & (value)) << 5) -#define INCA_IP_Switch_CPU_WFQ_CTL_WT0 (value) (((( 1 << 3) - 1) & (value)) << 2) -#define INCA_IP_Switch_CPU_WFQ_CTL_SCH_SEL (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***PM PC RX Watermark Register***/ -#define INCA_IP_Switch_PC_WM ((volatile u32*)(INCA_IP_Switch+ 0x0200)) -#define INCA_IP_Switch_PC_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_Switch_PC_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_Switch_PC_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_Switch_PC_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM LAN RX Watermark Register***/ -#define INCA_IP_Switch_LAN_WM ((volatile u32*)(INCA_IP_Switch+ 0x0204)) -#define INCA_IP_Switch_LAN_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_Switch_LAN_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_Switch_LAN_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_Switch_LAN_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM CPU RX Watermark Register***/ -#define INCA_IP_Switch_CPU_WM ((volatile u32*)(INCA_IP_Switch+ 0x0208)) -#define INCA_IP_Switch_CPU_WM_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_Switch_CPU_WM_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_Switch_CPU_WM_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_Switch_CPU_WM_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM CPU RX Watermark Register***/ -#define INCA_IP_Switch_GBL_WM ((volatile u32*)(INCA_IP_Switch+ 0x020C)) -#define INCA_IP_Switch_GBL_WM_GBL_RX_WM1 (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_Switch_GBL_WM_GBL_RX_WM2 (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_Switch_GBL_WM_GBL_RX_WM3 (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_Switch_GBL_WM_GBL_RX_WM4 (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM Control Register***/ -#define INCA_IP_Switch_PM_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0210)) -#define INCA_IP_Switch_PM_CTL_GDN (1 << 3) -#define INCA_IP_Switch_PM_CTL_CDN (1 << 2) -#define INCA_IP_Switch_PM_CTL_LDN (1 << 1) -#define INCA_IP_Switch_PM_CTL_PDN (1 << 0) - -/***PM Header Control Register***/ -#define INCA_IP_Switch_PMAC_HD_CTL ((volatile u32*)(INCA_IP_Switch+ 0x0280)) -#define INCA_IP_Switch_PMAC_HD_CTL_RL2 (1 << 21) -#define INCA_IP_Switch_PMAC_HD_CTL_RC (1 << 20) -#define INCA_IP_Switch_PMAC_HD_CTL_CM (1 << 19) -#define INCA_IP_Switch_PMAC_HD_CTL_CV (1 << 18) -#define INCA_IP_Switch_PMAC_HD_CTL_TYPE_LEN (value) (((( 1 << 16) - 1) & (value)) << 2) -#define INCA_IP_Switch_PMAC_HD_CTL_TAG (1 << 1) -#define INCA_IP_Switch_PMAC_HD_CTL_ADD (1 << 0) - -/***PM Source Address Register 1***/ -#define INCA_IP_Switch_PMAC_SA1 ((volatile u32*)(INCA_IP_Switch+ 0x0284)) -#define INCA_IP_Switch_PMAC_SA1_SA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***PM Source Address Register 2***/ -#define INCA_IP_Switch_PMAC_SA2 ((volatile u32*)(INCA_IP_Switch+ 0x0288)) -#define INCA_IP_Switch_PMAC_SA2_SA_31_0 - -/***PM Dest Address Register 1***/ -#define INCA_IP_Switch_PMAC_DA1 ((volatile u32*)(INCA_IP_Switch+ 0x028C)) -#define INCA_IP_Switch_PMAC_DA1_DA_47_32 (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***PM Dest Address Register 2***/ -#define INCA_IP_Switch_PMAC_DA2 ((volatile u32*)(INCA_IP_Switch+ 0x0290)) -#define INCA_IP_Switch_PMAC_DA2_DA_31_0 - -/***PM VLAN Register***/ -#define INCA_IP_Switch_PMAC_VLAN ((volatile u32*)(INCA_IP_Switch+ 0x0294)) -#define INCA_IP_Switch_PMAC_VLAN_PRI (value) (((( 1 << 3) - 1) & (value)) << 13) -#define INCA_IP_Switch_PMAC_VLAN_CFI (1 << 12) -#define INCA_IP_Switch_PMAC_VLAN_VLANID (value) (((( 1 << 12) - 1) & (value)) << 0) - -/***PM TX IPG Counter Register***/ -#define INCA_IP_Switch_PMAC_TX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x0298)) -#define INCA_IP_Switch_PMAC_TX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***PM RX IPG Counter Register***/ -#define INCA_IP_Switch_PMAC_RX_IPG ((volatile u32*)(INCA_IP_Switch+ 0x029C)) -#define INCA_IP_Switch_PMAC_RX_IPG_IPGCNT (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Mirror Register***/ -#define INCA_IP_Switch_MRR ((volatile u32*)(INCA_IP_Switch+ 0x0300)) -#define INCA_IP_Switch_MRR_MRR (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_Switch_MRR_EC (1 << 5) -#define INCA_IP_Switch_MRR_EL (1 << 4) -#define INCA_IP_Switch_MRR_EP (1 << 3) -#define INCA_IP_Switch_MRR_IC (1 << 2) -#define INCA_IP_Switch_MRR_IL (1 << 1) -#define INCA_IP_Switch_MRR_IP (1 << 0) - -/***Packet Length Register***/ -#define INCA_IP_Switch_PKT_LEN ((volatile u32*)(INCA_IP_Switch+ 0x0304)) -#define INCA_IP_Switch_PKT_LEN_ADD (1 << 11) -#define INCA_IP_Switch_PKT_LEN_MAX_PKT_LEN (value) (((( 1 << 11) - 1) & (value)) << 0) - -/***MDIO Access Register***/ -#define INCA_IP_Switch_MDIO_ACC ((volatile u32*)(INCA_IP_Switch+ 0x0480)) -#define INCA_IP_Switch_MDIO_ACC_RA (1 << 31) -#define INCA_IP_Switch_MDIO_ACC_RW (1 << 30) -#define INCA_IP_Switch_MDIO_ACC_PHY_ADDR (value) (((( 1 << 5) - 1) & (value)) << 21) -#define INCA_IP_Switch_MDIO_ACC_REG_ADDR (value) (((( 1 << 5) - 1) & (value)) << 16) -#define INCA_IP_Switch_MDIO_ACC_PHY_DATA (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***Ethernet PHY Register***/ -#define INCA_IP_Switch_EPHY ((volatile u32*)(INCA_IP_Switch+ 0x0484)) -#define INCA_IP_Switch_EPHY_SL (1 << 7) -#define INCA_IP_Switch_EPHY_SP (1 << 6) -#define INCA_IP_Switch_EPHY_LL (1 << 5) -#define INCA_IP_Switch_EPHY_LP (1 << 4) -#define INCA_IP_Switch_EPHY_DL (1 << 3) -#define INCA_IP_Switch_EPHY_DP (1 << 2) -#define INCA_IP_Switch_EPHY_PL (1 << 1) -#define INCA_IP_Switch_EPHY_PP (1 << 0) - -/***Pause Write Enable Register***/ -#define INCA_IP_Switch_PWR_EN ((volatile u32*)(INCA_IP_Switch+ 0x0488)) -#define INCA_IP_Switch_PWR_EN_PL (1 << 1) -#define INCA_IP_Switch_PWR_EN_PP (1 << 0) - -/***MDIO Configuration Register***/ -#define INCA_IP_Switch_MDIO_CFG ((volatile u32*)(INCA_IP_Switch+ 0x048C)) -#define INCA_IP_Switch_MDIO_CFG_MDS (value) (((( 1 << 2) - 1) & (value)) << 14) -#define INCA_IP_Switch_MDIO_CFG_PHY_LAN_ADDR (value) (((( 1 << 5) - 1) & (value)) << 9) -#define INCA_IP_Switch_MDIO_CFG_PHY_PC_ADDR (value) (((( 1 << 5) - 1) & (value)) << 4) -#define INCA_IP_Switch_MDIO_CFG_UEP (1 << 3) -#define INCA_IP_Switch_MDIO_CFG_PS (1 << 2) -#define INCA_IP_Switch_MDIO_CFG_PT (1 << 1) -#define INCA_IP_Switch_MDIO_CFG_UMM (1 << 0) - -/***Clock Configuration Register***/ -#define INCA_IP_Switch_CLK_CFG ((volatile u32*)(INCA_IP_Switch+ 0x0500)) -#define INCA_IP_Switch_CLK_CFG_ARL_ID (1 << 9) -#define INCA_IP_Switch_CLK_CFG_CPU_ID (1 << 8) -#define INCA_IP_Switch_CLK_CFG_LAN_ID (1 << 7) -#define INCA_IP_Switch_CLK_CFG_PC_ID (1 << 6) -#define INCA_IP_Switch_CLK_CFG_SE_ID (1 << 5) - -/***********************************************************************/ -/* Module : SSC1 register address and bits */ -/***********************************************************************/ - -#define INCA_IP_SSC1 (0xB8000500) -/***********************************************************************/ - - -/***Control Register (Programming Mode)***/ -#define INCA_IP_SSC1_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC1+ 0x0010)) -#define INCA_IP_SSC1_SCC_CON_PRG_EN (1 << 15) -#define INCA_IP_SSC1_SCC_CON_PRG_MS (1 << 14) -#define INCA_IP_SSC1_SCC_CON_PRG_AREN (1 << 12) -#define INCA_IP_SSC1_SCC_CON_PRG_BEN (1 << 11) -#define INCA_IP_SSC1_SCC_CON_PRG_PEN (1 << 10) -#define INCA_IP_SSC1_SCC_CON_PRG_REN (1 << 9) -#define INCA_IP_SSC1_SCC_CON_PRG_TEN (1 << 8) -#define INCA_IP_SSC1_SCC_CON_PRG_LB (1 << 7) -#define INCA_IP_SSC1_SCC_CON_PRG_PO (1 << 6) -#define INCA_IP_SSC1_SCC_CON_PRG_PH (1 << 5) -#define INCA_IP_SSC1_SCC_CON_PRG_HB (1 << 4) -#define INCA_IP_SSC1_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***SCC Control Register (Operating Mode)***/ -#define INCA_IP_SSC1_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC1+ 0x0010)) -#define INCA_IP_SSC1_SCC_CON_OPR_EN (1 << 15) -#define INCA_IP_SSC1_SCC_CON_OPR_MS (1 << 14) -#define INCA_IP_SSC1_SCC_CON_OPR_BSY (1 << 12) -#define INCA_IP_SSC1_SCC_CON_OPR_BE (1 << 11) -#define INCA_IP_SSC1_SCC_CON_OPR_PE (1 << 10) -#define INCA_IP_SSC1_SCC_CON_OPR_RE (1 << 9) -#define INCA_IP_SSC1_SCC_CON_OPR_TE (1 << 8) -#define INCA_IP_SSC1_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***SSC Write Hardware Modified Control Register***/ -#define INCA_IP_SSC1_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC1+ 0x0040)) -#define INCA_IP_SSC1_SSC_WHBCON_SETBE (1 << 15) -#define INCA_IP_SSC1_SSC_WHBCON_SETPE (1 << 14) -#define INCA_IP_SSC1_SSC_WHBCON_SETRE (1 << 13) -#define INCA_IP_SSC1_SSC_WHBCON_SETTE (1 << 12) -#define INCA_IP_SSC1_SSC_WHBCON_CLRBE (1 << 11) -#define INCA_IP_SSC1_SSC_WHBCON_CLRPE (1 << 10) -#define INCA_IP_SSC1_SSC_WHBCON_CLRRE (1 << 9) -#define INCA_IP_SSC1_SSC_WHBCON_CLRTE (1 << 8) - -/***SSC Baudrate Timer Reload Register***/ -#define INCA_IP_SSC1_SSC_BR ((volatile u32*)(INCA_IP_SSC1+ 0x0014)) -#define INCA_IP_SSC1_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Transmitter Buffer Register***/ -#define INCA_IP_SSC1_SSC_TB ((volatile u32*)(INCA_IP_SSC1+ 0x0020)) -#define INCA_IP_SSC1_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Receiver Buffer Register***/ -#define INCA_IP_SSC1_SSC_RB ((volatile u32*)(INCA_IP_SSC1+ 0x0024)) -#define INCA_IP_SSC1_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Receive FIFO Control Register***/ -#define INCA_IP_SSC1_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0030)) -#define INCA_IP_SSC1_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC1_SSC_RXFCON_RXTMEN (1 << 2) -#define INCA_IP_SSC1_SSC_RXFCON_RXFLU (1 << 1) -#define INCA_IP_SSC1_SSC_RXFCON_RXFEN (1 << 0) - -/***SSC Transmit FIFO Control Register***/ -#define INCA_IP_SSC1_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC1+ 0x0034)) -#define INCA_IP_SSC1_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC1_SSC_TXFCON_TXTMEN (1 << 2) -#define INCA_IP_SSC1_SSC_TXFCON_TXFLU (1 << 1) -#define INCA_IP_SSC1_SSC_TXFCON_TXFEN (1 << 0) - -/***SSC FIFO Status Register***/ -#define INCA_IP_SSC1_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC1+ 0x0038)) -#define INCA_IP_SSC1_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC1_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0) - -/***SSC Clock Control Register***/ -#define INCA_IP_SSC1_SSC_CLC ((volatile u32*)(INCA_IP_SSC1+ 0x0000)) -#define INCA_IP_SSC1_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_SSC1_SSC_CLC_DISS (1 << 1) -#define INCA_IP_SSC1_SSC_CLC_DISR (1 << 0) - -/***********************************************************************/ -/* Module : SSC2 register address and bits */ -/***********************************************************************/ - -#define INCA_IP_SSC2 (0xB8000600) -/***********************************************************************/ - - -/***Control Register (Programming Mode)***/ -#define INCA_IP_SSC2_SCC_CON_PRG ((volatile u32*)(INCA_IP_SSC2+ 0x0010)) -#define INCA_IP_SSC2_SCC_CON_PRG_EN (1 << 15) -#define INCA_IP_SSC2_SCC_CON_PRG_MS (1 << 14) -#define INCA_IP_SSC2_SCC_CON_PRG_AREN (1 << 12) -#define INCA_IP_SSC2_SCC_CON_PRG_BEN (1 << 11) -#define INCA_IP_SSC2_SCC_CON_PRG_PEN (1 << 10) -#define INCA_IP_SSC2_SCC_CON_PRG_REN (1 << 9) -#define INCA_IP_SSC2_SCC_CON_PRG_TEN (1 << 8) -#define INCA_IP_SSC2_SCC_CON_PRG_LB (1 << 7) -#define INCA_IP_SSC2_SCC_CON_PRG_PO (1 << 6) -#define INCA_IP_SSC2_SCC_CON_PRG_PH (1 << 5) -#define INCA_IP_SSC2_SCC_CON_PRG_HB (1 << 4) -#define INCA_IP_SSC2_SCC_CON_PRG_BM (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***SCC Control Register (Operating Mode)***/ -#define INCA_IP_SSC2_SCC_CON_OPR ((volatile u32*)(INCA_IP_SSC2+ 0x0010)) -#define INCA_IP_SSC2_SCC_CON_OPR_EN (1 << 15) -#define INCA_IP_SSC2_SCC_CON_OPR_MS (1 << 14) -#define INCA_IP_SSC2_SCC_CON_OPR_BSY (1 << 12) -#define INCA_IP_SSC2_SCC_CON_OPR_BE (1 << 11) -#define INCA_IP_SSC2_SCC_CON_OPR_PE (1 << 10) -#define INCA_IP_SSC2_SCC_CON_OPR_RE (1 << 9) -#define INCA_IP_SSC2_SCC_CON_OPR_TE (1 << 8) -#define INCA_IP_SSC2_SCC_CON_OPR_BC (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***SSC Write Hardware Modified Control Register***/ -#define INCA_IP_SSC2_SSC_WHBCON ((volatile u32*)(INCA_IP_SSC2+ 0x0040)) -#define INCA_IP_SSC2_SSC_WHBCON_SETBE (1 << 15) -#define INCA_IP_SSC2_SSC_WHBCON_SETPE (1 << 14) -#define INCA_IP_SSC2_SSC_WHBCON_SETRE (1 << 13) -#define INCA_IP_SSC2_SSC_WHBCON_SETTE (1 << 12) -#define INCA_IP_SSC2_SSC_WHBCON_CLRBE (1 << 11) -#define INCA_IP_SSC2_SSC_WHBCON_CLRPE (1 << 10) -#define INCA_IP_SSC2_SSC_WHBCON_CLRRE (1 << 9) -#define INCA_IP_SSC2_SSC_WHBCON_CLRTE (1 << 8) - -/***SSC Baudrate Timer Reload Register***/ -#define INCA_IP_SSC2_SSC_BR ((volatile u32*)(INCA_IP_SSC2+ 0x0014)) -#define INCA_IP_SSC2_SSC_BR_BR_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Transmitter Buffer Register***/ -#define INCA_IP_SSC2_SSC_TB ((volatile u32*)(INCA_IP_SSC2+ 0x0020)) -#define INCA_IP_SSC2_SSC_TB_TB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Receiver Buffer Register***/ -#define INCA_IP_SSC2_SSC_RB ((volatile u32*)(INCA_IP_SSC2+ 0x0024)) -#define INCA_IP_SSC2_SSC_RB_RB_VALUE (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***SSC Receive FIFO Control Register***/ -#define INCA_IP_SSC2_SSC_RXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0030)) -#define INCA_IP_SSC2_SSC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC2_SSC_RXFCON_RXTMEN (1 << 2) -#define INCA_IP_SSC2_SSC_RXFCON_RXFLU (1 << 1) -#define INCA_IP_SSC2_SSC_RXFCON_RXFEN (1 << 0) - -/***SSC Transmit FIFO Control Register***/ -#define INCA_IP_SSC2_SSC_TXFCON ((volatile u32*)(INCA_IP_SSC2+ 0x0034)) -#define INCA_IP_SSC2_SSC_TXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC2_SSC_TXFCON_TXTMEN (1 << 2) -#define INCA_IP_SSC2_SSC_TXFCON_TXFLU (1 << 1) -#define INCA_IP_SSC2_SSC_TXFCON_TXFEN (1 << 0) - -/***SSC FIFO Status Register***/ -#define INCA_IP_SSC2_SSC_FSTAT ((volatile u32*)(INCA_IP_SSC2+ 0x0038)) -#define INCA_IP_SSC2_SSC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_SSC2_SSC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0) - -/***SSC Clock Control Register***/ -#define INCA_IP_SSC2_SSC_CLC ((volatile u32*)(INCA_IP_SSC2+ 0x0000)) -#define INCA_IP_SSC2_SSC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_SSC2_SSC_CLC_DISS (1 << 1) -#define INCA_IP_SSC2_SSC_CLC_DISR (1 << 0) - -/***********************************************************************/ -/* Module : EBU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_EBU (0xB8000200) -/***********************************************************************/ - - -/***EBU Clock Control Register***/ -#define INCA_IP_EBU_EBU_CLC ((volatile u32*)(INCA_IP_EBU+ 0x0000)) -#define INCA_IP_EBU_EBU_CLC_DISS (1 << 1) -#define INCA_IP_EBU_EBU_CLC_DISR (1 << 0) - -/***EBU Global Control Register***/ -#define INCA_IP_EBU_EBU_CON ((volatile u32*)(INCA_IP_EBU+ 0x0010)) -#define INCA_IP_EBU_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20) -#define INCA_IP_EBU_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16) -#define INCA_IP_EBU_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_EBU_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_EBU_EBU_CON_ARBSYNC (1 << 5) -#define INCA_IP_EBU_EBU_CON_1 (1 << 3) - -/***EBU Address Select Register 0***/ -#define INCA_IP_EBU_EBU_ADDSEL0 ((volatile u32*)(INCA_IP_EBU+ 0x0020)) -#define INCA_IP_EBU_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define INCA_IP_EBU_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_ADDSEL0_MIRRORE (1 << 1) -#define INCA_IP_EBU_EBU_ADDSEL0_REGEN (1 << 0) - -/***EBU Address Select Register 1***/ -#define INCA_IP_EBU_EBU_ADDSEL1 ((volatile u32*)(INCA_IP_EBU+ 0x0024)) -#define INCA_IP_EBU_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define INCA_IP_EBU_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_ADDSEL1_MIRRORE (1 << 1) -#define INCA_IP_EBU_EBU_ADDSEL1_REGEN (1 << 0) - -/***EBU Address Select Register 2***/ -#define INCA_IP_EBU_EBU_ADDSEL2 ((volatile u32*)(INCA_IP_EBU+ 0x0028)) -#define INCA_IP_EBU_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12) -#define INCA_IP_EBU_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_ADDSEL2_MIRRORE (1 << 1) -#define INCA_IP_EBU_EBU_ADDSEL2_REGEN (1 << 0) - -/***EBU Bus Configuration Register 0***/ -#define INCA_IP_EBU_EBU_BUSCON0 ((volatile u32*)(INCA_IP_EBU+ 0x0060)) -#define INCA_IP_EBU_EBU_BUSCON0_WRDIS (1 << 31) -#define INCA_IP_EBU_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_EBU_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) -#define INCA_IP_EBU_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) -#define INCA_IP_EBU_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) -#define INCA_IP_EBU_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) -#define INCA_IP_EBU_EBU_BUSCON0_WAITINV (1 << 19) -#define INCA_IP_EBU_EBU_BUSCON0_SETUP (1 << 18) -#define INCA_IP_EBU_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) -#define INCA_IP_EBU_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) -#define INCA_IP_EBU_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_EBU_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_EBU_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 1***/ -#define INCA_IP_EBU_EBU_BUSCON1 ((volatile u32*)(INCA_IP_EBU+ 0x0064)) -#define INCA_IP_EBU_EBU_BUSCON1_WRDIS (1 << 31) -#define INCA_IP_EBU_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_EBU_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) -#define INCA_IP_EBU_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) -#define INCA_IP_EBU_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) -#define INCA_IP_EBU_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) -#define INCA_IP_EBU_EBU_BUSCON1_WAITINV (1 << 19) -#define INCA_IP_EBU_EBU_BUSCON1_SETUP (1 << 18) -#define INCA_IP_EBU_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) -#define INCA_IP_EBU_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) -#define INCA_IP_EBU_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_EBU_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_EBU_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 2***/ -#define INCA_IP_EBU_EBU_BUSCON2 ((volatile u32*)(INCA_IP_EBU+ 0x0068)) -#define INCA_IP_EBU_EBU_BUSCON2_WRDIS (1 << 31) -#define INCA_IP_EBU_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_EBU_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27) -#define INCA_IP_EBU_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24) -#define INCA_IP_EBU_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22) -#define INCA_IP_EBU_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20) -#define INCA_IP_EBU_EBU_BUSCON2_WAITINV (1 << 19) -#define INCA_IP_EBU_EBU_BUSCON2_SETUP (1 << 18) -#define INCA_IP_EBU_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16) -#define INCA_IP_EBU_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9) -#define INCA_IP_EBU_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_EBU_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_EBU_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_EBU_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : SDRAM register address and bits */ -/***********************************************************************/ - -#define INCA_IP_SDRAM (0xBF800000) -/***********************************************************************/ - - -/***MC Access Error Cause Register***/ -#define INCA_IP_SDRAM_MC_ERRCAUSE ((volatile u32*)(INCA_IP_SDRAM+ 0x0100)) -#define INCA_IP_SDRAM_MC_ERRCAUSE_ERR (1 << 31) -#define INCA_IP_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN) - -/***MC Access Error Address Register***/ -#define INCA_IP_SDRAM_MC_ERRADDR ((volatile u32*)(INCA_IP_SDRAM+ 0x0108)) -#define INCA_IP_SDRAM_MC_ERRADDR_ADDR - -/***MC I/O General Purpose Register***/ -#define INCA_IP_SDRAM_MC_IOGP ((volatile u32*)(INCA_IP_SDRAM+ 0x0800)) -#define INCA_IP_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28) -#define INCA_IP_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24) -#define INCA_IP_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20) -#define INCA_IP_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12) -#define INCA_IP_SDRAM_MC_IOGP_CPS (1 << 11) -#define INCA_IP_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8) -#define INCA_IP_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***MC Self Refresh Register***/ -#define INCA_IP_SDRAM_MC_SELFRFSH ((volatile u32*)(INCA_IP_SDRAM+ 0x0A00)) -#define INCA_IP_SDRAM_MC_SELFRFSH_PWDS (1 << 1) -#define INCA_IP_SDRAM_MC_SELFRFSH_PWD (1 << 0) -#define INCA_IP_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2) - -/***MC Enable Register***/ -#define INCA_IP_SDRAM_MC_CTRLENA ((volatile u32*)(INCA_IP_SDRAM+ 0x1000)) -#define INCA_IP_SDRAM_MC_CTRLENA_ENA (1 << 0) -#define INCA_IP_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1) - -/***MC Mode Register Setup Code***/ -#define INCA_IP_SDRAM_MC_MRSCODE ((volatile u32*)(INCA_IP_SDRAM+ 0x1008)) -#define INCA_IP_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7) -#define INCA_IP_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4) -#define INCA_IP_SDRAM_MC_MRSCODE_WT (1 << 3) -#define INCA_IP_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***MC Configuration Data-word Width Register***/ -#define INCA_IP_SDRAM_MC_CFGDW ((volatile u32*)(INCA_IP_SDRAM+ 0x1010)) -#define INCA_IP_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4) - -/***MC Configuration Physical Bank 0 Register***/ -#define INCA_IP_SDRAM_MC_CFGPB0 ((volatile u32*)(INCA_IP_SDRAM+ 0x1018)) -#define INCA_IP_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12) -#define INCA_IP_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8) -#define INCA_IP_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16) - -/***MC Latency Register***/ -#define INCA_IP_SDRAM_MC_LATENCY ((volatile u32*)(INCA_IP_SDRAM+ 0x1038)) -#define INCA_IP_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12) -#define INCA_IP_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8) -#define INCA_IP_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20) - -/***MC Refresh Cycle Time Register***/ -#define INCA_IP_SDRAM_MC_TREFRESH ((volatile u32*)(INCA_IP_SDRAM+ 0x1040)) -#define INCA_IP_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0) -#define INCA_IP_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13) - -/***********************************************************************/ -/* Module : GPTU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_GPTU (0xB8000300) -/***********************************************************************/ - - -/***GPT Clock Control Register***/ -#define INCA_IP_GPTU_GPT_CLC ((volatile u32*)(INCA_IP_GPTU+ 0x0000)) -#define INCA_IP_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_GPTU_GPT_CLC_DISS (1 << 1) -#define INCA_IP_GPTU_GPT_CLC_DISR (1 << 0) - -/***GPT Timer 3 Control Register***/ -#define INCA_IP_GPTU_GPT_T3CON ((volatile u32*)(INCA_IP_GPTU+ 0x0014)) -#define INCA_IP_GPTU_GPT_T3CON_T3RDIR (1 << 15) -#define INCA_IP_GPTU_GPT_T3CON_T3CHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_T3CON_T3EDGE (1 << 13) -#define INCA_IP_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11) -#define INCA_IP_GPTU_GPT_T3CON_T3OTL (1 << 10) -#define INCA_IP_GPTU_GPT_T3CON_T3UD (1 << 7) -#define INCA_IP_GPTU_GPT_T3CON_T3R (1 << 6) -#define INCA_IP_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write Hardware Modified Timer 3 Control Register -If set and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define INCA_IP_GPTU_GPT_WHBT3CON ((volatile u32*)(INCA_IP_GPTU+ 0x004C)) -#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15) -#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13) -#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12) -#define INCA_IP_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11) -#define INCA_IP_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10) - -/***GPT Timer 2 Control Register***/ -#define INCA_IP_GPTU_GPT_T2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0010)) -#define INCA_IP_GPTU_GPT_T2CON_TxRDIR (1 << 15) -#define INCA_IP_GPTU_GPT_T2CON_TxCHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_T2CON_TxEDGE (1 << 13) -#define INCA_IP_GPTU_GPT_T2CON_TxIRDIS (1 << 12) -#define INCA_IP_GPTU_GPT_T2CON_TxRC (1 << 9) -#define INCA_IP_GPTU_GPT_T2CON_TxUD (1 << 7) -#define INCA_IP_GPTU_GPT_T2CON_TxR (1 << 6) -#define INCA_IP_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Timer 4 Control Register***/ -#define INCA_IP_GPTU_GPT_T4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0018)) -#define INCA_IP_GPTU_GPT_T4CON_TxRDIR (1 << 15) -#define INCA_IP_GPTU_GPT_T4CON_TxCHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_T4CON_TxEDGE (1 << 13) -#define INCA_IP_GPTU_GPT_T4CON_TxIRDIS (1 << 12) -#define INCA_IP_GPTU_GPT_T4CON_TxRC (1 << 9) -#define INCA_IP_GPTU_GPT_T4CON_TxUD (1 << 7) -#define INCA_IP_GPTU_GPT_T4CON_TxR (1 << 6) -#define INCA_IP_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 2 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define INCA_IP_GPTU_GPT_WHBT2CON ((volatile u32*)(INCA_IP_GPTU+ 0x0048)) -#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15) -#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13) -#define INCA_IP_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12) - -/***GPT Write HW Modified Timer 4 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define INCA_IP_GPTU_GPT_WHBT4CON ((volatile u32*)(INCA_IP_GPTU+ 0x0050)) -#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15) -#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14) -#define INCA_IP_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13) -#define INCA_IP_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12) - -/***GPT Capture Reload Register***/ -#define INCA_IP_GPTU_GPT_CAPREL ((volatile u32*)(INCA_IP_GPTU+ 0x0030)) -#define INCA_IP_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 2 Register***/ -#define INCA_IP_GPTU_GPT_T2 ((volatile u32*)(INCA_IP_GPTU+ 0x0034)) -#define INCA_IP_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 3 Register***/ -#define INCA_IP_GPTU_GPT_T3 ((volatile u32*)(INCA_IP_GPTU+ 0x0038)) -#define INCA_IP_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 4 Register***/ -#define INCA_IP_GPTU_GPT_T4 ((volatile u32*)(INCA_IP_GPTU+ 0x003C)) -#define INCA_IP_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 5 Register***/ -#define INCA_IP_GPTU_GPT_T5 ((volatile u32*)(INCA_IP_GPTU+ 0x0040)) -#define INCA_IP_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Register***/ -#define INCA_IP_GPTU_GPT_T6 ((volatile u32*)(INCA_IP_GPTU+ 0x0044)) -#define INCA_IP_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Control Register***/ -#define INCA_IP_GPTU_GPT_T6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0020)) -#define INCA_IP_GPTU_GPT_T6CON_T6SR (1 << 15) -#define INCA_IP_GPTU_GPT_T6CON_T6CLR (1 << 14) -#define INCA_IP_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11) -#define INCA_IP_GPTU_GPT_T6CON_T6OTL (1 << 10) -#define INCA_IP_GPTU_GPT_T6CON_T6UD (1 << 7) -#define INCA_IP_GPTU_GPT_T6CON_T6R (1 << 6) -#define INCA_IP_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 6 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define INCA_IP_GPTU_GPT_WHBT6CON ((volatile u32*)(INCA_IP_GPTU+ 0x0054)) -#define INCA_IP_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11) -#define INCA_IP_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10) - -/***GPT Timer 5 Control Register***/ -#define INCA_IP_GPTU_GPT_T5CON ((volatile u32*)(INCA_IP_GPTU+ 0x001C)) -#define INCA_IP_GPTU_GPT_T5CON_T5SC (1 << 15) -#define INCA_IP_GPTU_GPT_T5CON_T5CLR (1 << 14) -#define INCA_IP_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12) -#define INCA_IP_GPTU_GPT_T5CON_T5CC (1 << 11) -#define INCA_IP_GPTU_GPT_T5CON_CT3 (1 << 10) -#define INCA_IP_GPTU_GPT_T5CON_T5RC (1 << 9) -#define INCA_IP_GPTU_GPT_T5CON_T5UDE (1 << 8) -#define INCA_IP_GPTU_GPT_T5CON_T5UD (1 << 7) -#define INCA_IP_GPTU_GPT_T5CON_T5R (1 << 6) -#define INCA_IP_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : IOM register address and bits */ -/***********************************************************************/ - -#define INCA_IP_IOM (0xBF105000) -/***********************************************************************/ - - -/***Receive FIFO***/ -#define INCA_IP_IOM_RFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000)) -#define INCA_IP_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Transmit FIFO***/ -#define INCA_IP_IOM_XFIFO ((volatile u32*)(INCA_IP_IOM+ 0x0000)) -#define INCA_IP_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Interrupt Status Register HDLC***/ -#define INCA_IP_IOM_ISTAH ((volatile u32*)(INCA_IP_IOM+ 0x0080)) -#define INCA_IP_IOM_ISTAH_RME (1 << 7) -#define INCA_IP_IOM_ISTAH_RPF (1 << 6) -#define INCA_IP_IOM_ISTAH_RFO (1 << 5) -#define INCA_IP_IOM_ISTAH_XPR (1 << 4) -#define INCA_IP_IOM_ISTAH_XMR (1 << 3) -#define INCA_IP_IOM_ISTAH_XDU (1 << 2) - -/***Interrupt Mask Register HDLC***/ -#define INCA_IP_IOM_MASKH ((volatile u32*)(INCA_IP_IOM+ 0x0080)) -#define INCA_IP_IOM_MASKH_RME (1 << 7) -#define INCA_IP_IOM_MASKH_RPF (1 << 6) -#define INCA_IP_IOM_MASKH_RFO (1 << 5) -#define INCA_IP_IOM_MASKH_XPR (1 << 4) -#define INCA_IP_IOM_MASKH_XMR (1 << 3) -#define INCA_IP_IOM_MASKH_XDU (1 << 2) - -/***Status Register***/ -#define INCA_IP_IOM_STAR ((volatile u32*)(INCA_IP_IOM+ 0x0084)) -#define INCA_IP_IOM_STAR_XDOV (1 << 7) -#define INCA_IP_IOM_STAR_XFW (1 << 6) -#define INCA_IP_IOM_STAR_RACI (1 << 3) -#define INCA_IP_IOM_STAR_XACI (1 << 1) - -/***Command Register***/ -#define INCA_IP_IOM_CMDR ((volatile u32*)(INCA_IP_IOM+ 0x0084)) -#define INCA_IP_IOM_CMDR_RMC (1 << 7) -#define INCA_IP_IOM_CMDR_RRES (1 << 6) -#define INCA_IP_IOM_CMDR_XTF (1 << 3) -#define INCA_IP_IOM_CMDR_XME (1 << 1) -#define INCA_IP_IOM_CMDR_XRES (1 << 0) - -/***Mode Register***/ -#define INCA_IP_IOM_MODEH ((volatile u32*)(INCA_IP_IOM+ 0x0088)) -#define INCA_IP_IOM_MODEH_MDS2 (1 << 7) -#define INCA_IP_IOM_MODEH_MDS1 (1 << 6) -#define INCA_IP_IOM_MODEH_MDS0 (1 << 5) -#define INCA_IP_IOM_MODEH_RAC (1 << 3) -#define INCA_IP_IOM_MODEH_DIM2 (1 << 2) -#define INCA_IP_IOM_MODEH_DIM1 (1 << 1) -#define INCA_IP_IOM_MODEH_DIM0 (1 << 0) - -/***Extended Mode Register***/ -#define INCA_IP_IOM_EXMR ((volatile u32*)(INCA_IP_IOM+ 0x008C)) -#define INCA_IP_IOM_EXMR_XFBS (1 << 7) -#define INCA_IP_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5) -#define INCA_IP_IOM_EXMR_SRA (1 << 4) -#define INCA_IP_IOM_EXMR_XCRC (1 << 3) -#define INCA_IP_IOM_EXMR_RCRC (1 << 2) -#define INCA_IP_IOM_EXMR_ITF (1 << 0) - -/***SAPI1 Register***/ -#define INCA_IP_IOM_SAP1 ((volatile u32*)(INCA_IP_IOM+ 0x0094)) -#define INCA_IP_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2) -#define INCA_IP_IOM_SAP1_MHA (1 << 0) - -/***Receive Frame Byte Count Low***/ -#define INCA_IP_IOM_RBCL ((volatile u32*)(INCA_IP_IOM+ 0x0098)) -#define INCA_IP_IOM_RBCL_RBC(value) (1 << value) - - -/***SAPI2 Register***/ -#define INCA_IP_IOM_SAP2 ((volatile u32*)(INCA_IP_IOM+ 0x0098)) -#define INCA_IP_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2) -#define INCA_IP_IOM_SAP2_MLA (1 << 0) - -/***Receive Frame Byte Count High***/ -#define INCA_IP_IOM_RBCH ((volatile u32*)(INCA_IP_IOM+ 0x009C)) -#define INCA_IP_IOM_RBCH_OV (1 << 4) -#define INCA_IP_IOM_RBCH_RBC11 (1 << 3) -#define INCA_IP_IOM_RBCH_RBC10 (1 << 2) -#define INCA_IP_IOM_RBCH_RBC9 (1 << 1) -#define INCA_IP_IOM_RBCH_RBC8 (1 << 0) - -/***TEI1 Register 1***/ -#define INCA_IP_IOM_TEI1 ((volatile u32*)(INCA_IP_IOM+ 0x009C)) -#define INCA_IP_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1) -#define INCA_IP_IOM_TEI1_EA (1 << 0) - -/***Receive Status Register***/ -#define INCA_IP_IOM_RSTA ((volatile u32*)(INCA_IP_IOM+ 0x00A0)) -#define INCA_IP_IOM_RSTA_VFR (1 << 7) -#define INCA_IP_IOM_RSTA_RDO (1 << 6) -#define INCA_IP_IOM_RSTA_CRC (1 << 5) -#define INCA_IP_IOM_RSTA_RAB (1 << 4) -#define INCA_IP_IOM_RSTA_SA1 (1 << 3) -#define INCA_IP_IOM_RSTA_SA0 (1 << 2) -#define INCA_IP_IOM_RSTA_TA (1 << 0) -#define INCA_IP_IOM_RSTA_CR (1 << 1) - -/***TEI2 Register***/ -#define INCA_IP_IOM_TEI2 ((volatile u32*)(INCA_IP_IOM+ 0x00A0)) -#define INCA_IP_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1) -#define INCA_IP_IOM_TEI2_EA (1 << 0) - -/***Test Mode Register HDLC***/ -#define INCA_IP_IOM_TMH ((volatile u32*)(INCA_IP_IOM+ 0x00A4)) -#define INCA_IP_IOM_TMH_TLP (1 << 0) - -/***Command/Indication Receive 0***/ -#define INCA_IP_IOM_CIR0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8)) -#define INCA_IP_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_IOM_CIR0_CIC0 (1 << 3) -#define INCA_IP_IOM_CIR0_CIC1 (1 << 2) -#define INCA_IP_IOM_CIR0_SG (1 << 1) -#define INCA_IP_IOM_CIR0_BAS (1 << 0) - -/***Command/Indication Transmit 0***/ -#define INCA_IP_IOM_CIX0 ((volatile u32*)(INCA_IP_IOM+ 0x00B8)) -#define INCA_IP_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4) -#define INCA_IP_IOM_CIX0_TBA2 (1 << 3) -#define INCA_IP_IOM_CIX0_TBA1 (1 << 2) -#define INCA_IP_IOM_CIX0_TBA0 (1 << 1) -#define INCA_IP_IOM_CIX0_BAC (1 << 0) - -/***Command/Indication Receive 1***/ -#define INCA_IP_IOM_CIR1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC)) -#define INCA_IP_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2) - -/***Command/Indication Transmit 1***/ -#define INCA_IP_IOM_CIX1 ((volatile u32*)(INCA_IP_IOM+ 0x00BC)) -#define INCA_IP_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2) -#define INCA_IP_IOM_CIX1_CICW (1 << 1) -#define INCA_IP_IOM_CIX1_CI1E (1 << 0) - -/***Controller Data Access Reg. (CH10)***/ -#define INCA_IP_IOM_CDA10 ((volatile u32*)(INCA_IP_IOM+ 0x0100)) -#define INCA_IP_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Controller Data Access Reg. (CH11)***/ -#define INCA_IP_IOM_CDA11 ((volatile u32*)(INCA_IP_IOM+ 0x0104)) -#define INCA_IP_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Controller Data Access Reg. (CH20)***/ -#define INCA_IP_IOM_CDA20 ((volatile u32*)(INCA_IP_IOM+ 0x0108)) -#define INCA_IP_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Controller Data Access Reg. (CH21)***/ -#define INCA_IP_IOM_CDA21 ((volatile u32*)(INCA_IP_IOM+ 0x010C)) -#define INCA_IP_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH10)***/ -#define INCA_IP_IOM_CDA_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0110)) -#define INCA_IP_IOM_CDA_TSDP10_DPS (1 << 7) -#define INCA_IP_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH11)***/ -#define INCA_IP_IOM_CDA_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0114)) -#define INCA_IP_IOM_CDA_TSDP11_DPS (1 << 7) -#define INCA_IP_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH20)***/ -#define INCA_IP_IOM_CDA_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0118)) -#define INCA_IP_IOM_CDA_TSDP20_DPS (1 << 7) -#define INCA_IP_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH21)***/ -#define INCA_IP_IOM_CDA_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x011C)) -#define INCA_IP_IOM_CDA_TSDP21_DPS (1 << 7) -#define INCA_IP_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH10)***/ -#define INCA_IP_IOM_CO_TSDP10 ((volatile u32*)(INCA_IP_IOM+ 0x0120)) -#define INCA_IP_IOM_CO_TSDP10_DPS (1 << 7) -#define INCA_IP_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH11)***/ -#define INCA_IP_IOM_CO_TSDP11 ((volatile u32*)(INCA_IP_IOM+ 0x0124)) -#define INCA_IP_IOM_CO_TSDP11_DPS (1 << 7) -#define INCA_IP_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH20)***/ -#define INCA_IP_IOM_CO_TSDP20 ((volatile u32*)(INCA_IP_IOM+ 0x0128)) -#define INCA_IP_IOM_CO_TSDP20_DPS (1 << 7) -#define INCA_IP_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Time Slot and Data Port Sel. (CH21)***/ -#define INCA_IP_IOM_CO_TSDP21 ((volatile u32*)(INCA_IP_IOM+ 0x012C)) -#define INCA_IP_IOM_CO_TSDP21_DPS (1 << 7) -#define INCA_IP_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Ctrl. Reg. Contr. Data Access CH1x***/ -#define INCA_IP_IOM_CDA1_CR ((volatile u32*)(INCA_IP_IOM+ 0x0138)) -#define INCA_IP_IOM_CDA1_CR_EN_TBM (1 << 5) -#define INCA_IP_IOM_CDA1_CR_EN_I1 (1 << 4) -#define INCA_IP_IOM_CDA1_CR_EN_I0 (1 << 3) -#define INCA_IP_IOM_CDA1_CR_EN_O1 (1 << 2) -#define INCA_IP_IOM_CDA1_CR_EN_O0 (1 << 1) -#define INCA_IP_IOM_CDA1_CR_SWAP (1 << 0) - -/***Ctrl. Reg. Contr. Data Access CH1x***/ -#define INCA_IP_IOM_CDA2_CR ((volatile u32*)(INCA_IP_IOM+ 0x013C)) -#define INCA_IP_IOM_CDA2_CR_EN_TBM (1 << 5) -#define INCA_IP_IOM_CDA2_CR_EN_I1 (1 << 4) -#define INCA_IP_IOM_CDA2_CR_EN_I0 (1 << 3) -#define INCA_IP_IOM_CDA2_CR_EN_O1 (1 << 2) -#define INCA_IP_IOM_CDA2_CR_EN_O0 (1 << 1) -#define INCA_IP_IOM_CDA2_CR_SWAP (1 << 0) - -/***Control Register B-Channel Data***/ -#define INCA_IP_IOM_BCHA_CR ((volatile u32*)(INCA_IP_IOM+ 0x0144)) -#define INCA_IP_IOM_BCHA_CR_EN_BC2 (1 << 4) -#define INCA_IP_IOM_BCHA_CR_EN_BC1 (1 << 3) - -/***Control Register B-Channel Data***/ -#define INCA_IP_IOM_BCHB_CR ((volatile u32*)(INCA_IP_IOM+ 0x0148)) -#define INCA_IP_IOM_BCHB_CR_EN_BC2 (1 << 4) -#define INCA_IP_IOM_BCHB_CR_EN_BC1 (1 << 3) - -/***Control Reg. for HDLC and CI1 Data***/ -#define INCA_IP_IOM_DCI_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C)) -#define INCA_IP_IOM_DCI_CR_DPS_CI1 (1 << 7) -#define INCA_IP_IOM_DCI_CR_EN_CI1 (1 << 6) -#define INCA_IP_IOM_DCI_CR_EN_D (1 << 5) - -/***Control Reg. for HDLC and CI1 Data***/ -#define INCA_IP_IOM_DCIC_CR ((volatile u32*)(INCA_IP_IOM+ 0x014C)) -#define INCA_IP_IOM_DCIC_CR_DPS_CI0 (1 << 7) -#define INCA_IP_IOM_DCIC_CR_EN_CI0 (1 << 6) -#define INCA_IP_IOM_DCIC_CR_DPS_D (1 << 5) - -/***Control Reg. Serial Data Strobe x***/ -#define INCA_IP_IOM_SDS_CR ((volatile u32*)(INCA_IP_IOM+ 0x0154)) -#define INCA_IP_IOM_SDS_CR_ENS_TSS (1 << 7) -#define INCA_IP_IOM_SDS_CR_ENS_TSS_1 (1 << 6) -#define INCA_IP_IOM_SDS_CR_ENS_TSS_3 (1 << 5) -#define INCA_IP_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Control Register IOM Data***/ -#define INCA_IP_IOM_IOM_CR ((volatile u32*)(INCA_IP_IOM+ 0x015C)) -#define INCA_IP_IOM_IOM_CR_SPU (1 << 7) -#define INCA_IP_IOM_IOM_CR_CI_CS (1 << 5) -#define INCA_IP_IOM_IOM_CR_TIC_DIS (1 << 4) -#define INCA_IP_IOM_IOM_CR_EN_BCL (1 << 3) -#define INCA_IP_IOM_IOM_CR_CLKM (1 << 2) -#define INCA_IP_IOM_IOM_CR_Res (1 << 1) -#define INCA_IP_IOM_IOM_CR_DIS_IOM (1 << 0) - -/***Synchronous Transfer Interrupt***/ -#define INCA_IP_IOM_STI ((volatile u32*)(INCA_IP_IOM+ 0x0160)) -#define INCA_IP_IOM_STI_STOV21 (1 << 7) -#define INCA_IP_IOM_STI_STOV20 (1 << 6) -#define INCA_IP_IOM_STI_STOV11 (1 << 5) -#define INCA_IP_IOM_STI_STOV10 (1 << 4) -#define INCA_IP_IOM_STI_STI21 (1 << 3) -#define INCA_IP_IOM_STI_STI20 (1 << 2) -#define INCA_IP_IOM_STI_STI11 (1 << 1) -#define INCA_IP_IOM_STI_STI10 (1 << 0) - -/***Acknowledge Synchronous Transfer Interrupt***/ -#define INCA_IP_IOM_ASTI ((volatile u32*)(INCA_IP_IOM+ 0x0160)) -#define INCA_IP_IOM_ASTI_ACK21 (1 << 3) -#define INCA_IP_IOM_ASTI_ACK20 (1 << 2) -#define INCA_IP_IOM_ASTI_ACK11 (1 << 1) -#define INCA_IP_IOM_ASTI_ACK10 (1 << 0) - -/***Mask Synchronous Transfer Interrupt***/ -#define INCA_IP_IOM_MSTI ((volatile u32*)(INCA_IP_IOM+ 0x0164)) -#define INCA_IP_IOM_MSTI_STOV21 (1 << 7) -#define INCA_IP_IOM_MSTI_STOV20 (1 << 6) -#define INCA_IP_IOM_MSTI_STOV11 (1 << 5) -#define INCA_IP_IOM_MSTI_STOV10 (1 << 4) -#define INCA_IP_IOM_MSTI_STI21 (1 << 3) -#define INCA_IP_IOM_MSTI_STI20 (1 << 2) -#define INCA_IP_IOM_MSTI_STI11 (1 << 1) -#define INCA_IP_IOM_MSTI_STI10 (1 << 0) - -/***Configuration Register for Serial Data Strobes***/ -#define INCA_IP_IOM_SDS_CONF ((volatile u32*)(INCA_IP_IOM+ 0x0168)) -#define INCA_IP_IOM_SDS_CONF_SDS_BCL (1 << 0) - -/***Monitoring CDA Bits***/ -#define INCA_IP_IOM_MCDA ((volatile u32*)(INCA_IP_IOM+ 0x016C)) -#define INCA_IP_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : ASC register address and bits */ -/***********************************************************************/ - -#define INCA_IP_ASC (0xB8000400) -/***********************************************************************/ - - -/***ASC Port Input Select Register***/ -#define INCA_IP_ASC_ASC_PISEL ((volatile u32*)(INCA_IP_ASC+ 0x0004)) -#define INCA_IP_ASC_ASC_PISEL_RIS (1 << 0) - -/***ASC Control Register***/ -#define INCA_IP_ASC_ASC_CON ((volatile u32*)(INCA_IP_ASC+ 0x0010)) -#define INCA_IP_ASC_ASC_CON_R (1 << 15) -#define INCA_IP_ASC_ASC_CON_LB (1 << 14) -#define INCA_IP_ASC_ASC_CON_BRS (1 << 13) -#define INCA_IP_ASC_ASC_CON_ODD (1 << 12) -#define INCA_IP_ASC_ASC_CON_FDE (1 << 11) -#define INCA_IP_ASC_ASC_CON_OE (1 << 10) -#define INCA_IP_ASC_ASC_CON_FE (1 << 9) -#define INCA_IP_ASC_ASC_CON_PE (1 << 8) -#define INCA_IP_ASC_ASC_CON_OEN (1 << 7) -#define INCA_IP_ASC_ASC_CON_FEN (1 << 6) -#define INCA_IP_ASC_ASC_CON_PENRXDI (1 << 5) -#define INCA_IP_ASC_ASC_CON_REN (1 << 4) -#define INCA_IP_ASC_ASC_CON_STP (1 << 3) -#define INCA_IP_ASC_ASC_CON_M (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***ASC Write Hardware Modified Control Register***/ -#define INCA_IP_ASC_ASC_WHBCON ((volatile u32*)(INCA_IP_ASC+ 0x0050)) -#define INCA_IP_ASC_ASC_WHBCON_SETOE (1 << 13) -#define INCA_IP_ASC_ASC_WHBCON_SETFE (1 << 12) -#define INCA_IP_ASC_ASC_WHBCON_SETPE (1 << 11) -#define INCA_IP_ASC_ASC_WHBCON_CLROE (1 << 10) -#define INCA_IP_ASC_ASC_WHBCON_CLRFE (1 << 9) -#define INCA_IP_ASC_ASC_WHBCON_CLRPE (1 << 8) -#define INCA_IP_ASC_ASC_WHBCON_SETREN (1 << 5) -#define INCA_IP_ASC_ASC_WHBCON_CLRREN (1 << 4) - -/***ASC Baudrate Timer/Reload Register***/ -#define INCA_IP_ASC_ASC_BTR ((volatile u32*)(INCA_IP_ASC+ 0x0014)) -#define INCA_IP_ASC_ASC_BTR_BR_VALUE (value) (((( 1 << 13) - 1) & (value)) << 0) - -/***ASC Fractional Divider Register***/ -#define INCA_IP_ASC_ASC_FDV ((volatile u32*)(INCA_IP_ASC+ 0x0018)) -#define INCA_IP_ASC_ASC_FDV_FD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC IrDA Pulse Mode/Width Register***/ -#define INCA_IP_ASC_ASC_PMW ((volatile u32*)(INCA_IP_ASC+ 0x001C)) -#define INCA_IP_ASC_ASC_PMW_IRPW (1 << 8) -#define INCA_IP_ASC_ASC_PMW_PW_VALUE (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***ASC Transmit Buffer Register***/ -#define INCA_IP_ASC_ASC_TBUF ((volatile u32*)(INCA_IP_ASC+ 0x0020)) -#define INCA_IP_ASC_ASC_TBUF_TD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Receive Buffer Register***/ -#define INCA_IP_ASC_ASC_RBUF ((volatile u32*)(INCA_IP_ASC+ 0x0024)) -#define INCA_IP_ASC_ASC_RBUF_RD_VALUE (value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Autobaud Control Register***/ -#define INCA_IP_ASC_ASC_ABCON ((volatile u32*)(INCA_IP_ASC+ 0x0030)) -#define INCA_IP_ASC_ASC_ABCON_RXINV (1 << 11) -#define INCA_IP_ASC_ASC_ABCON_TXINV (1 << 10) -#define INCA_IP_ASC_ASC_ABCON_ABEM (value) (((( 1 << 2) - 1) & (value)) << 8) -#define INCA_IP_ASC_ASC_ABCON_FCDETEN (1 << 4) -#define INCA_IP_ASC_ASC_ABCON_ABDETEN (1 << 3) -#define INCA_IP_ASC_ASC_ABCON_ABSTEN (1 << 2) -#define INCA_IP_ASC_ASC_ABCON_AUREN (1 << 1) -#define INCA_IP_ASC_ASC_ABCON_ABEN (1 << 0) - -/***Receive FIFO Control Register***/ -#define INCA_IP_ASC_RXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0040)) -#define INCA_IP_ASC_RXFCON_RXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_ASC_RXFCON_RXTMEN (1 << 2) -#define INCA_IP_ASC_RXFCON_RXFFLU (1 << 1) -#define INCA_IP_ASC_RXFCON_RXFEN (1 << 0) - -/***Transmit FIFO Control Register***/ -#define INCA_IP_ASC_TXFCON ((volatile u32*)(INCA_IP_ASC+ 0x0044)) -#define INCA_IP_ASC_TXFCON_TXFITL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_ASC_TXFCON_TXTMEN (1 << 2) -#define INCA_IP_ASC_TXFCON_TXFFLU (1 << 1) -#define INCA_IP_ASC_TXFCON_TXFEN (1 << 0) - -/***FIFO Status Register***/ -#define INCA_IP_ASC_FSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0048)) -#define INCA_IP_ASC_FSTAT_TXFFL (value) (((( 1 << 6) - 1) & (value)) << 8) -#define INCA_IP_ASC_FSTAT_RXFFL (value) (((( 1 << 6) - 1) & (value)) << 0) - -/***ASC Write HW Modified Autobaud Control Register***/ -#define INCA_IP_ASC_ASC_WHBABCON ((volatile u32*)(INCA_IP_ASC+ 0x0054)) -#define INCA_IP_ASC_ASC_WHBABCON_SETABEN (1 << 1) -#define INCA_IP_ASC_ASC_WHBABCON_CLRABEN (1 << 0) - -/***ASC Autobaud Status Register***/ -#define INCA_IP_ASC_ASC_ABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0034)) -#define INCA_IP_ASC_ASC_ABSTAT_DETWAIT (1 << 4) -#define INCA_IP_ASC_ASC_ABSTAT_SCCDET (1 << 3) -#define INCA_IP_ASC_ASC_ABSTAT_SCSDET (1 << 2) -#define INCA_IP_ASC_ASC_ABSTAT_FCCDET (1 << 1) -#define INCA_IP_ASC_ASC_ABSTAT_FCSDET (1 << 0) - -/***ASC Write HW Modified Autobaud Status Register***/ -#define INCA_IP_ASC_ASC_WHBABSTAT ((volatile u32*)(INCA_IP_ASC+ 0x0058)) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETDETWAIT (1 << 9) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRDETWAIT (1 << 8) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCCDET (1 << 7) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCCDET (1 << 6) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETSCSDET (1 << 5) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRSCSDET (1 << 4) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCCDET (1 << 3) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCCDET (1 << 2) -#define INCA_IP_ASC_ASC_WHBABSTAT_SETFCSDET (1 << 1) -#define INCA_IP_ASC_ASC_WHBABSTAT_CLRFCSDET (1 << 0) - -/***ASC Clock Control Register***/ -#define INCA_IP_ASC_ASC_CLC ((volatile u32*)(INCA_IP_ASC+ 0x0000)) -#define INCA_IP_ASC_ASC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_ASC_ASC_CLC_DISS (1 << 1) -#define INCA_IP_ASC_ASC_CLC_DISR (1 << 0) - -/***********************************************************************/ -/* Module : DMA register address and bits */ -/***********************************************************************/ - -#define INCA_IP_DMA (0xBF108000) -/***********************************************************************/ - - -/***DMA RX Channel 0 Command Register***/ -#define INCA_IP_DMA_DMA_RXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0800)) -#define INCA_IP_DMA_DMA_RXCCR0_LBE (1 << 31) -#define INCA_IP_DMA_DMA_RXCCR0_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_RXCCR0_INIT (1 << 2) -#define INCA_IP_DMA_DMA_RXCCR0_OFF (1 << 1) -#define INCA_IP_DMA_DMA_RXCCR0_HR (1 << 0) - -/***DMA RX Channel 1 Command Register***/ -#define INCA_IP_DMA_DMA_RXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0804)) -#define INCA_IP_DMA_DMA_RXCCR1_LBE (1 << 31) -#define INCA_IP_DMA_DMA_RXCCR1_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_RXCCR1_INIT (1 << 2) -#define INCA_IP_DMA_DMA_RXCCR1_OFF (1 << 1) -#define INCA_IP_DMA_DMA_RXCCR1_HR (1 << 0) - -/***DMA Receive Interrupt Status Register***/ -#define INCA_IP_DMA_DMA_RXISR ((volatile u32*)(INCA_IP_DMA+ 0x0808)) -#define INCA_IP_DMA_DMA_RXISR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8) -#define INCA_IP_DMA_DMA_RXISR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_DMA_DMA_RXISR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_DMA_DMA_RXISR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_DMA_DMA_RXISR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***DMA Receive Interrupt Mask Register***/ -#define INCA_IP_DMA_DMA_RXIMR ((volatile u32*)(INCA_IP_DMA+ 0x080C)) -#define INCA_IP_DMA_DMA_RXIMR_RDERRx (value) (((( 1 << 2) - 1) & (value)) << 8) -#define INCA_IP_DMA_DMA_RXIMR_CMDCPTx (value) (((( 1 << 2) - 1) & (value)) << 6) -#define INCA_IP_DMA_DMA_RXIMR_EOPx (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_DMA_DMA_RXIMR_CPTx (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_DMA_DMA_RXIMR_HLDx (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***DMA First Receive Descriptor Addr. for Rx Channel 0 -***/ -#define INCA_IP_DMA_DMA_RXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x0810)) -#define INCA_IP_DMA_DMA_RXFRDA0_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA First Receive Descriptor Addr. for Rx Channel 1 -***/ -#define INCA_IP_DMA_DMA_RXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x0814)) -#define INCA_IP_DMA_DMA_RXFRDA1_RXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA Receive Channel Polling Time***/ -#define INCA_IP_DMA_DMA_RXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x0818)) -#define INCA_IP_DMA_DMA_RXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 30) -#define INCA_IP_DMA_DMA_RXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 28) -#define INCA_IP_DMA_DMA_RXPOLL_RXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***DMA TX Channel 0 Command Register (Voice Port)***/ -#define INCA_IP_DMA_DMA_TXCCR0 ((volatile u32*)(INCA_IP_DMA+ 0x0880)) -#define INCA_IP_DMA_DMA_TXCCR0_LBE (1 << 31) -#define INCA_IP_DMA_DMA_TXCCR0_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_TXCCR0_HR (1 << 2) -#define INCA_IP_DMA_DMA_TXCCR0_OFF (1 << 1) -#define INCA_IP_DMA_DMA_TXCCR0_INIT (1 << 0) - -/***DMA TX Channel 1 Command Register (Mangmt Port)***/ -#define INCA_IP_DMA_DMA_TXCCR1 ((volatile u32*)(INCA_IP_DMA+ 0x0884)) -#define INCA_IP_DMA_DMA_TXCCR1_LBE (1 << 31) -#define INCA_IP_DMA_DMA_TXCCR1_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_TXCCR1_HR (1 << 2) -#define INCA_IP_DMA_DMA_TXCCR1_OFF (1 << 1) -#define INCA_IP_DMA_DMA_TXCCR1_INIT (1 << 0) - -/***DMA TX Channel 2 Command Register (SSC Port)***/ -#define INCA_IP_DMA_DMA_TXCCR2 ((volatile u32*)(INCA_IP_DMA+ 0x0888)) -#define INCA_IP_DMA_DMA_TXCCR2_LBE (1 << 31) -#define INCA_IP_DMA_DMA_TXCCR2_HPEN (1 << 30) -#define INCA_IP_DMA_DMA_TXCCR2_HBF (1 << 29) -#define INCA_IP_DMA_DMA_TXCCR2_HR (1 << 2) -#define INCA_IP_DMA_DMA_TXCCR2_OFF (1 << 1) -#define INCA_IP_DMA_DMA_TXCCR2_INIT (1 << 0) - -/***DMA First Receive Descriptor Addr. for Tx Channel 0 -***/ -#define INCA_IP_DMA_DMA_TXFRDA0 ((volatile u32*)(INCA_IP_DMA+ 0x08A0)) -#define INCA_IP_DMA_DMA_TXFRDA0_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA First Receive Descriptor Addr. for Tx Channel 1 -***/ -#define INCA_IP_DMA_DMA_TXFRDA1 ((volatile u32*)(INCA_IP_DMA+ 0x08A4)) -#define INCA_IP_DMA_DMA_TXFRDA1_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA First Receive Descriptor Addr. for Tx Channel 2 -***/ -#define INCA_IP_DMA_DMA_TXFRDA2 ((volatile u32*)(INCA_IP_DMA+ 0x08A8)) -#define INCA_IP_DMA_DMA_TXFRDA2_TXFRDA (value) (((( 1 << 28) - 1) & (value)) << 0) - -/***DMA Transmit Channel Arbitration Register***/ -#define INCA_IP_DMA_DMA_TXWGT ((volatile u32*)(INCA_IP_DMA+ 0x08C0)) -#define INCA_IP_DMA_DMA_TXWGT_TX2PR (value) (((( 1 << 2) - 1) & (value)) << 4) -#define INCA_IP_DMA_DMA_TXWGT_TX1PRI (value) (((( 1 << 2) - 1) & (value)) << 2) -#define INCA_IP_DMA_DMA_TXWGT_TX0PRI (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***DMA Transmit Channel Polling Time***/ -#define INCA_IP_DMA_DMA_TXPOLL ((volatile u32*)(INCA_IP_DMA+ 0x08C4)) -#define INCA_IP_DMA_DMA_TXPOLL_BSZ2 (value) (((( 1 << 2) - 1) & (value)) << 30) -#define INCA_IP_DMA_DMA_TXPOLL_BSZ1 (value) (((( 1 << 2) - 1) & (value)) << 28) -#define INCA_IP_DMA_DMA_TXPOLL_BSZ0 (value) (((( 1 << 2) - 1) & (value)) << 26) -#define INCA_IP_DMA_DMA_TXPOLL_TXPOLLTIME (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***DMA Transmit Interrupt Status Register***/ -#define INCA_IP_DMA_DMA_TXISR ((volatile u32*)(INCA_IP_DMA+ 0x08C8)) -#define INCA_IP_DMA_DMA_TXISR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_DMA_DMA_TXISR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9) -#define INCA_IP_DMA_DMA_TXISR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_DMA_DMA_TXISR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_DMA_DMA_TXISR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***DMA Transmit Interrupt Mask Register***/ -#define INCA_IP_DMA_DMA_TXIMR ((volatile u32*)(INCA_IP_DMA+ 0x08CC)) -#define INCA_IP_DMA_DMA_TXIMR_RDERRx (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_DMA_DMA_TXIMR_HLDx (value) (((( 1 << 3) - 1) & (value)) << 9) -#define INCA_IP_DMA_DMA_TXIMR_CPTx (value) (((( 1 << 3) - 1) & (value)) << 6) -#define INCA_IP_DMA_DMA_TXIMR_EOPx (value) (((( 1 << 3) - 1) & (value)) << 3) -#define INCA_IP_DMA_DMA_TXIMR_CMDCPTx (value) (((( 1 << 3) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : Debug register address and bits */ -/***********************************************************************/ - -#define INCA_IP_Debug (0xBF106000) -/***********************************************************************/ - - -/***MCD Break Bus Switch Register***/ -#define INCA_IP_Debug_MCD_BBS ((volatile u32*)(INCA_IP_Debug+ 0x0000)) -#define INCA_IP_Debug_MCD_BBS_BTP1 (1 << 19) -#define INCA_IP_Debug_MCD_BBS_BTP0 (1 << 18) -#define INCA_IP_Debug_MCD_BBS_BSP1 (1 << 17) -#define INCA_IP_Debug_MCD_BBS_BSP0 (1 << 16) -#define INCA_IP_Debug_MCD_BBS_BT5EN (1 << 15) -#define INCA_IP_Debug_MCD_BBS_BT4EN (1 << 14) -#define INCA_IP_Debug_MCD_BBS_BT5 (1 << 13) -#define INCA_IP_Debug_MCD_BBS_BT4 (1 << 12) -#define INCA_IP_Debug_MCD_BBS_BS5EN (1 << 7) -#define INCA_IP_Debug_MCD_BBS_BS4EN (1 << 6) -#define INCA_IP_Debug_MCD_BBS_BS5 (1 << 5) -#define INCA_IP_Debug_MCD_BBS_BS4 (1 << 4) - -/***MCD Multiplexer Control Register***/ -#define INCA_IP_Debug_MCD_MCR ((volatile u32*)(INCA_IP_Debug+ 0x0008)) -#define INCA_IP_Debug_MCD_MCR_MUX5 (1 << 4) -#define INCA_IP_Debug_MCD_MCR_MUX4 (1 << 3) -#define INCA_IP_Debug_MCD_MCR_MUX1 (1 << 0) - -/***********************************************************************/ -/* Module : TSF register address and bits */ -/***********************************************************************/ - -#define INCA_IP_TSF (0xB8000900) -/***********************************************************************/ - - -/***TSF Configuration Register (0000H)***/ -#define INCA_IP_TSF_TSF_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0000)) -#define INCA_IP_TSF_TSF_CONF_PWMEN (1 << 2) -#define INCA_IP_TSF_TSF_CONF_LEDEN (1 << 1) -#define INCA_IP_TSF_TSF_CONF_KEYEN (1 << 0) - -/***Key scan Configuration Register (0004H)***/ -#define INCA_IP_TSF_KEY_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0004)) -#define INCA_IP_TSF_KEY_CONF_SL (value) (((( 1 << 4) - 1) & (value)) << 0) - -/***Scan Register Line 0 and 1 (0008H)***/ -#define INCA_IP_TSF_SREG01 ((volatile u32*)(INCA_IP_TSF+ 0x0008)) -#define INCA_IP_TSF_SREG01_RES1x (value) (((( 1 << 12) - 1) & (value)) << 16) -#define INCA_IP_TSF_SREG01_RES0x (value) (((( 1 << 13) - 1) & (value)) << 0) - -/***Scan Register Line 2 and 3 (000CH)***/ -#define INCA_IP_TSF_SREG23 ((volatile u32*)(INCA_IP_TSF+ 0x000C)) -#define INCA_IP_TSF_SREG23_RES3x (value) (((( 1 << 10) - 1) & (value)) << 16) -#define INCA_IP_TSF_SREG23_RES2x (value) (((( 1 << 11) - 1) & (value)) << 0) - -/***Scan Register Line 4, 5 and 6 (0010H)***/ -#define INCA_IP_TSF_SREG456 ((volatile u32*)(INCA_IP_TSF+ 0x0010)) -#define INCA_IP_TSF_SREG456_RES6x (value) (((( 1 << 7) - 1) & (value)) << 24) -#define INCA_IP_TSF_SREG456_RES5x (value) (((( 1 << 8) - 1) & (value)) << 16) -#define INCA_IP_TSF_SREG456_RES4x (value) (((( 1 << 9) - 1) & (value)) << 0) - -/***Scan Register Line 7 to 12 (0014H)***/ -#define INCA_IP_TSF_SREG7to12 ((volatile u32*)(INCA_IP_TSF+ 0x0014)) -#define INCA_IP_TSF_SREG7to12_RES12x (1 << 28) -#define INCA_IP_TSF_SREG7to12_RES11x (value) (((( 1 << 2) - 1) & (value)) << 24) -#define INCA_IP_TSF_SREG7to12_RES10x (value) (((( 1 << 3) - 1) & (value)) << 20) -#define INCA_IP_TSF_SREG7to12_RES9x (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_TSF_SREG7to12_RES8x (value) (((( 1 << 5) - 1) & (value)) << 8) -#define INCA_IP_TSF_SREG7to12_RES7x (value) (((( 1 << 6) - 1) & (value)) << 0) - -/***LEDMUX Configuration Register (0018H)***/ -#define INCA_IP_TSF_LEDMUX_CONF ((volatile u32*)(INCA_IP_TSF+ 0x0018)) -#define INCA_IP_TSF_LEDMUX_CONF_ETL1 (1 << 25) -#define INCA_IP_TSF_LEDMUX_CONF_ESTA1 (1 << 24) -#define INCA_IP_TSF_LEDMUX_CONF_EDPX1 (1 << 23) -#define INCA_IP_TSF_LEDMUX_CONF_EACT1 (1 << 22) -#define INCA_IP_TSF_LEDMUX_CONF_ESPD1 (1 << 21) -#define INCA_IP_TSF_LEDMUX_CONF_ETL0 (1 << 20) -#define INCA_IP_TSF_LEDMUX_CONF_ESTA0 (1 << 19) -#define INCA_IP_TSF_LEDMUX_CONF_EDPX0 (1 << 18) -#define INCA_IP_TSF_LEDMUX_CONF_EACT0 (1 << 17) -#define INCA_IP_TSF_LEDMUX_CONF_ESPD0 (1 << 16) -#define INCA_IP_TSF_LEDMUX_CONF_INV (1 << 1) -#define INCA_IP_TSF_LEDMUX_CONF_NCOL (1 << 0) - -/***LED Register (001CH)***/ -#define INCA_IP_TSF_LED_REG ((volatile u32*)(INCA_IP_TSF+ 0x001C)) -#define INCA_IP_TSF_LED_REG_Lxy (value) (((( 1 << 24) - 1) & (value)) << 0) - -/***Pulse Width Modulator 1 and 2 Register (0020H)***/ -#define INCA_IP_TSF_PWM12 ((volatile u32*)(INCA_IP_TSF+ 0x0020)) -#define INCA_IP_TSF_PWM12_PW2PW1 (value) (((( 1 << NaN) - 1) & (value)) << NaN) - -/***********************************************************************/ -/* Module : Ports register address and bits */ -/***********************************************************************/ - -#define INCA_IP_Ports (0xB8000A00) -/***********************************************************************/ - - -/***Port 1 Data Output Register (0020H)***/ -#define INCA_IP_Ports_P1_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0020)) -#define INCA_IP_Ports_P1_OUT_P(value) (1 << value) - - -/***Port 2 Data Output Register (0040H)***/ -#define INCA_IP_Ports_P2_OUT ((volatile u32*)(INCA_IP_Ports+ 0x0040)) -#define INCA_IP_Ports_P2_OUT_P(value) (1 << value) - - -/***Port 1 Data Input Register (0024H)***/ -#define INCA_IP_Ports_P1_IN ((volatile u32*)(INCA_IP_Ports+ 0x0024)) -#define INCA_IP_Ports_P1_IN_P(value) (1 << value) - - -/***Port 2 Data Input Register (0044H)***/ -#define INCA_IP_Ports_P2_IN ((volatile u32*)(INCA_IP_Ports+ 0x0044)) -#define INCA_IP_Ports_P2_IN_P(value) (1 << value) - - -/***Port 1 Direction Register (0028H)***/ -#define INCA_IP_Ports_P1_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0028)) -#define INCA_IP_Ports_P1_DIR_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P1_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***Port 2 Direction Register (0048H)***/ -#define INCA_IP_Ports_P2_DIR ((volatile u32*)(INCA_IP_Ports+ 0x0048)) -#define INCA_IP_Ports_P2_DIR_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P2_DIR_Port2Pn (value) (((( 1 << 16) - 1) & (value)) << 0) - -/***Port 0 Alternate Function Select Register 0 (000C H) -***/ -#define INCA_IP_Ports_P0_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x000C)) -#define INCA_IP_Ports_P0_ALTSEL_Port0P(value) (1 << value) - - -/***Port 1 Alternate Function Select Register 0 (002C H) -***/ -#define INCA_IP_Ports_P1_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x002C)) -#define INCA_IP_Ports_P1_ALTSEL_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P1_ALTSEL_Port2P(value) (1 << value) - - -/***Port 2 Alternate Function Select Register 0 (004C H) -***/ -#define INCA_IP_Ports_P2_ALTSEL ((volatile u32*)(INCA_IP_Ports+ 0x004C)) -#define INCA_IP_Ports_P2_ALTSEL_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P2_ALTSEL_Port2P(value) (1 << value) - - -/***Port 0 Input Schmitt-Trigger Off Register (0010 H) -***/ -#define INCA_IP_Ports_P0_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0010)) -#define INCA_IP_Ports_P0_STOFF_Port0P(value) (1 << value) - - -/***Port 1 Input Schmitt-Trigger Off Register (0030 H) -***/ -#define INCA_IP_Ports_P1_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0030)) -#define INCA_IP_Ports_P1_STOFF_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P1_STOFF_Port2P(value) (1 << value) - - -/***Port 2 Input Schmitt-Trigger Off Register (0050 H) -***/ -#define INCA_IP_Ports_P2_STOFF ((volatile u32*)(INCA_IP_Ports+ 0x0050)) -#define INCA_IP_Ports_P2_STOFF_Port1P(value) (1 << value) - -#define INCA_IP_Ports_P2_STOFF_Port2P(value) (1 << value) - - -/***Port 2 Open Drain Control Register (0054H)***/ -#define INCA_IP_Ports_P2_OD ((volatile u32*)(INCA_IP_Ports+ 0x0054)) -#define INCA_IP_Ports_P2_OD_Port2P(value) (1 << value) - - -/***Port 0 Pull Up Device Enable Register (0018 H)***/ -#define INCA_IP_Ports_P0_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0018)) -#define INCA_IP_Ports_P0_PUDEN_Port0P(value) (1 << value) - - -/***Port 2 Pull Up Device Enable Register (0058 H)***/ -#define INCA_IP_Ports_P2_PUDEN ((volatile u32*)(INCA_IP_Ports+ 0x0058)) -#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value) - -#define INCA_IP_Ports_P2_PUDEN_Port2P(value) (1 << value) - - -/***Port 0 Pull Up/Pull Down Select Register (001C H)***/ -#define INCA_IP_Ports_P0_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x001C)) -#define INCA_IP_Ports_P0_PUDSEL_Port0P(value) (1 << value) - - -/***Port 2 Pull Up/Pull Down Select Register (005C H)***/ -#define INCA_IP_Ports_P2_PUDSEL ((volatile u32*)(INCA_IP_Ports+ 0x005C)) -#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value) - -#define INCA_IP_Ports_P2_PUDSEL_Port2P(value) (1 << value) - - -/***********************************************************************/ -/* Module : DES/3DES register address and bits */ -/***********************************************************************/ - -#define INCA_IP_DES_3DES (0xB8000800) -/***********************************************************************/ - - -/***DES Input Data High Register***/ -#define INCA_IP_DES_3DES_DES_IHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0000)) -#define INCA_IP_DES_3DES_DES_IHR_IH(value) (1 << value) - - -/***DES Input Data Low Register***/ -#define INCA_IP_DES_3DES_DES_ILR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0004)) -#define INCA_IP_DES_3DES_DES_ILR_IL(value) (1 << value) - - -/***DES Key #1 High Register***/ -#define INCA_IP_DES_3DES_DES_K1HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0008)) -#define INCA_IP_DES_3DES_DES_K1HR_K1H(value) (1 << value) - - -/***DES Key #1 Low Register***/ -#define INCA_IP_DES_3DES_DES_K1LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x000C)) -#define INCA_IP_DES_3DES_DES_K1LR_K1L(value) (1 << value) - - -/***DES Key #2 High Register***/ -#define INCA_IP_DES_3DES_DES_K2HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0010)) -#define INCA_IP_DES_3DES_DES_K2HR_K2H(value) (1 << value) - - -/***DES Key #2 Low Register***/ -#define INCA_IP_DES_3DES_DES_K2LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0014)) -#define INCA_IP_DES_3DES_DES_K2LR_K2L(value) (1 << value) - - -/***DES Key #3 High Register***/ -#define INCA_IP_DES_3DES_DES_K3HR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0018)) -#define INCA_IP_DES_3DES_DES_K3HR_K3H(value) (1 << value) - - -/***DES Key #3 Low Register***/ -#define INCA_IP_DES_3DES_DES_K3LR ((volatile u32*)(INCA_IP_DES_3DES+ 0x001C)) -#define INCA_IP_DES_3DES_DES_K3LR_K3L(value) (1 << value) - - -/***DES Initialization Vector High Register***/ -#define INCA_IP_DES_3DES_DES_IVHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0020)) -#define INCA_IP_DES_3DES_DES_IVHR_IVH(value) (1 << value) - - -/***DES Initialization Vector Low Register***/ -#define INCA_IP_DES_3DES_DES_IVLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0024)) -#define INCA_IP_DES_3DES_DES_IVLR_IVL(value) (1 << value) - - -/***DES Control Register***/ -#define INCA_IP_DES_3DES_DES_CONTROLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0028)) -#define INCA_IP_DES_3DES_DES_CONTROLR_KRE (1 << 31) -#define INCA_IP_DES_3DES_DES_CONTROLR_DAU (1 << 16) -#define INCA_IP_DES_3DES_DES_CONTROLR_F(value) (1 << value) - -#define INCA_IP_DES_3DES_DES_CONTROLR_O(value) (1 << value) - -#define INCA_IP_DES_3DES_DES_CONTROLR_GO (1 << 8) -#define INCA_IP_DES_3DES_DES_CONTROLR_STP (1 << 7) -#define INCA_IP_DES_3DES_DES_CONTROLR_IEN (1 << 6) -#define INCA_IP_DES_3DES_DES_CONTROLR_BUS (1 << 5) -#define INCA_IP_DES_3DES_DES_CONTROLR_SM (1 << 4) -#define INCA_IP_DES_3DES_DES_CONTROLR_E_D (1 << 3) -#define INCA_IP_DES_3DES_DES_CONTROLR_M(value) (1 << value) - - -/***DES Output Data High Register***/ -#define INCA_IP_DES_3DES_DES_OHR ((volatile u32*)(INCA_IP_DES_3DES+ 0x002C)) -#define INCA_IP_DES_3DES_DES_OHR_OH(value) (1 << value) - - -/***DES Output Data Low Register***/ -#define INCA_IP_DES_3DES_DES_OLR ((volatile u32*)(INCA_IP_DES_3DES+ 0x0030)) -#define INCA_IP_DES_3DES_DES_OLR_OL(value) (1 << value) - - -/***********************************************************************/ -/* Module : AES register address and bits */ -/***********************************************************************/ - -#define INCA_IP_AES (0xB8000880) -/***********************************************************************/ - - -/***AES Input Data 3 Register***/ -#define INCA_IP_AES_AES_ID3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_ID3R_I(value) (1 << value) - - -/***AES Input Data 2 Register***/ -#define INCA_IP_AES_AES_ID2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_ID2R_I(value) (1 << value) - - -/***AES Input Data 1 Register***/ -#define INCA_IP_AES_AES_ID1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_ID1R_I(value) (1 << value) - - -/***AES Input Data 0 Register***/ -#define INCA_IP_AES_AES_ID0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_ID0R_I(value) (1 << value) - - -/***AES Output Data 3 Register***/ -#define INCA_IP_AES_AES_OD3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_OD3R_O(value) (1 << value) - - -/***AES Output Data 2 Register***/ -#define INCA_IP_AES_AES_OD2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_OD2R_O(value) (1 << value) - - -/***AES Output Data 1 Register***/ -#define INCA_IP_AES_AES_OD1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_OD1R_O(value) (1 << value) - - -/***AES Output Data 0 Register***/ -#define INCA_IP_AES_AES_OD0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_OD0R_O(value) (1 << value) - - -/***AES Key 7 Register***/ -#define INCA_IP_AES_AES_K7R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K7R_K(value) (1 << value) - - -/***AES Key 6 Register***/ -#define INCA_IP_AES_AES_K6R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K6R_K(value) (1 << value) - - -/***AES Key 5 Register***/ -#define INCA_IP_AES_AES_K5R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K5R_K(value) (1 << value) - - -/***AES Key 4 Register***/ -#define INCA_IP_AES_AES_K4R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K4R_K(value) (1 << value) - - -/***AES Key 3 Register***/ -#define INCA_IP_AES_AES_K3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K3R_K(value) (1 << value) - - -/***AES Key 2 Register***/ -#define INCA_IP_AES_AES_K2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K2R_K(value) (1 << value) - - -/***AES Key 1 Register***/ -#define INCA_IP_AES_AES_K1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K1R_K(value) (1 << value) - - -/***AES Key 0 Register***/ -#define INCA_IP_AES_AES_K0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_K0R_K(value) (1 << value) - - -/***AES Initialization Vector 3 Register***/ -#define INCA_IP_AES_AES_IV3R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_IV3R_IV(value) (1 << value) - - -/***AES Initialization Vector 2 Register***/ -#define INCA_IP_AES_AES_IV2R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_IV2R_IV(value) (1 << value) - - -/***AES Initialization Vector 1 Register***/ -#define INCA_IP_AES_AES_IV1R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_IV1R_IV(value) (1 << value) - - -/***AES Initialization Vector 0 Register***/ -#define INCA_IP_AES_AES_IV0R ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_IV0R_IV (value) (((( 1 << 32) - 1) &(value)) << 0) - -/***AES Control Register***/ -#define INCA_IP_AES_AES_CONTROLR ((volatile u32*)(INCA_IP_AES+ 0x0000)) -#define INCA_IP_AES_AES_CONTROLR_KRE (1 << 31) -#define INCA_IP_AES_AES_CONTROLR_DAU (1 << 16) -#define INCA_IP_AES_AES_CONTROLR_PNK (1 << 15) -#define INCA_IP_AES_AES_CONTROLR_F(value) (1 << value) - -#define INCA_IP_AES_AES_CONTROLR_O(value) (1 << value) - -#define INCA_IP_AES_AES_CONTROLR_GO (1 << 8) -#define INCA_IP_AES_AES_CONTROLR_STP (1 << 7) -#define INCA_IP_AES_AES_CONTROLR_IEN (1 << 6) -#define INCA_IP_AES_AES_CONTROLR_BUS (1 << 5) -#define INCA_IP_AES_AES_CONTROLR_SM (1 << 4) -#define INCA_IP_AES_AES_CONTROLR_E_D (1 << 3) -#define INCA_IP_AES_AES_CONTROLR_KV (1 << 2) -#define INCA_IP_AES_AES_CONTROLR_K(value) (1 << value) - - -/***********************************************************************/ -/* Module : I²C register address and bits */ -/***********************************************************************/ - -#define INCA_IP_IIC (0xB8000700) -/***********************************************************************/ - - -/***I²C Port Input Select Register***/ -#define INCA_IP_IIC_IIC_PISEL ((volatile u32*)(INCA_IP_IIC+ 0x0004)) -#define INCA_IP_IIC_IIC_PISEL_SDAIS(value) (1 << value) - -#define INCA_IP_IIC_IIC_PISEL_SCLIS(value) (1 << value) - - -/***I²C Clock Control Register***/ -#define INCA_IP_IIC_IIC_CLC ((volatile u32*)(INCA_IP_IIC+ 0x0000)) -#define INCA_IP_IIC_IIC_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_CLC_DISS (1 << 1) -#define INCA_IP_IIC_IIC_CLC_DISR (1 << 0) - -/***I²C System Control Register***/ -#define INCA_IP_IIC_IIC_SYSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0010)) -#define INCA_IP_IIC_IIC_SYSCON_0_WMEN (1 << 31) -#define INCA_IP_IIC_IIC_SYSCON_0_CI (value) (((( 1 << 2) - 1) & (value)) << 26) -#define INCA_IP_IIC_IIC_SYSCON_0_STP (1 << 25) -#define INCA_IP_IIC_IIC_SYSCON_0_IGE (1 << 24) -#define INCA_IP_IIC_IIC_SYSCON_0_TRX (1 << 23) -#define INCA_IP_IIC_IIC_SYSCON_0_INT (1 << 22) -#define INCA_IP_IIC_IIC_SYSCON_0_ACKDIS (1 << 21) -#define INCA_IP_IIC_IIC_SYSCON_0_BUM (1 << 20) -#define INCA_IP_IIC_IIC_SYSCON_0_MOD (value) (((( 1 << 2) - 1) & (value)) << 18) -#define INCA_IP_IIC_IIC_SYSCON_0_RSC (1 << 17) -#define INCA_IP_IIC_IIC_SYSCON_0_M10 (1 << 16) -#define INCA_IP_IIC_IIC_SYSCON_0_RMEN (1 << 15) -#define INCA_IP_IIC_IIC_SYSCON_0_CO (value) (((( 1 << 3) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_SYSCON_0_IRQE (1 << 7) -#define INCA_IP_IIC_IIC_SYSCON_0_IRQP (1 << 6) -#define INCA_IP_IIC_IIC_SYSCON_0_IRQD (1 << 5) -#define INCA_IP_IIC_IIC_SYSCON_0_BB (1 << 4) -#define INCA_IP_IIC_IIC_SYSCON_0_LRB (1 << 3) -#define INCA_IP_IIC_IIC_SYSCON_0_SLA (1 << 2) -#define INCA_IP_IIC_IIC_SYSCON_0_AL (1 << 1) -#define INCA_IP_IIC_IIC_SYSCON_0_ADR (1 << 0) - -/***I²C System Control Register***/ -#define INCA_IP_IIC_IIC_SYSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0010)) -#define INCA_IP_IIC_IIC_SYSCON_1_RM (value) (((( 1 << 8) - 1) & (value)) << 24) -#define INCA_IP_IIC_IIC_SYSCON_1_TRX (1 << 23) -#define INCA_IP_IIC_IIC_SYSCON_1_INT (1 << 22) -#define INCA_IP_IIC_IIC_SYSCON_1_ACKDIS (1 << 21) -#define INCA_IP_IIC_IIC_SYSCON_1_BUM (1 << 20) -#define INCA_IP_IIC_IIC_SYSCON_1_MOD (value) (((( 1 << 2) - 1) & (value)) << 18) -#define INCA_IP_IIC_IIC_SYSCON_1_RSC (1 << 17) -#define INCA_IP_IIC_IIC_SYSCON_1_M10 (1 << 16) -#define INCA_IP_IIC_IIC_SYSCON_1_RMEN (1 << 15) -#define INCA_IP_IIC_IIC_SYSCON_1_CO (value) (((( 1 << 3) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_SYSCON_1_IRQE (1 << 7) -#define INCA_IP_IIC_IIC_SYSCON_1_IRQP (1 << 6) -#define INCA_IP_IIC_IIC_SYSCON_1_IRQD (1 << 5) -#define INCA_IP_IIC_IIC_SYSCON_1_BB (1 << 4) -#define INCA_IP_IIC_IIC_SYSCON_1_LRB (1 << 3) -#define INCA_IP_IIC_IIC_SYSCON_1_SLA (1 << 2) -#define INCA_IP_IIC_IIC_SYSCON_1_AL (1 << 1) -#define INCA_IP_IIC_IIC_SYSCON_1_ADR (1 << 0) - -/***I²C System Control Register***/ -#define INCA_IP_IIC_IIC_SYSCON_2 ((volatile u32*)(INCA_IP_IIC+ 0x0010)) -#define INCA_IP_IIC_IIC_SYSCON_2_WMEN (1 << 31) -#define INCA_IP_IIC_IIC_SYSCON_2_CI (value) (((( 1 << 2) - 1) & (value)) << 26) -#define INCA_IP_IIC_IIC_SYSCON_2_STP (1 << 25) -#define INCA_IP_IIC_IIC_SYSCON_2_IGE (1 << 24) -#define INCA_IP_IIC_IIC_SYSCON_2_TRX (1 << 23) -#define INCA_IP_IIC_IIC_SYSCON_2_INT (1 << 22) -#define INCA_IP_IIC_IIC_SYSCON_2_ACKDIS (1 << 21) -#define INCA_IP_IIC_IIC_SYSCON_2_BUM (1 << 20) -#define INCA_IP_IIC_IIC_SYSCON_2_MOD (value) (((( 1 << 2) - 1) & (value)) << 18) -#define INCA_IP_IIC_IIC_SYSCON_2_RSC (1 << 17) -#define INCA_IP_IIC_IIC_SYSCON_2_M10 (1 << 16) -#define INCA_IP_IIC_IIC_SYSCON_2_WM (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_SYSCON_2_IRQE (1 << 7) -#define INCA_IP_IIC_IIC_SYSCON_2_IRQP (1 << 6) -#define INCA_IP_IIC_IIC_SYSCON_2_IRQD (1 << 5) -#define INCA_IP_IIC_IIC_SYSCON_2_BB (1 << 4) -#define INCA_IP_IIC_IIC_SYSCON_2_LRB (1 << 3) -#define INCA_IP_IIC_IIC_SYSCON_2_SLA (1 << 2) -#define INCA_IP_IIC_IIC_SYSCON_2_AL (1 << 1) -#define INCA_IP_IIC_IIC_SYSCON_2_ADR (1 << 0) - -/***I²C Write Hardware Modified System Control Register -***/ -#define INCA_IP_IIC_IIC_WHBSYSCON ((volatile u32*)(INCA_IP_IIC+ 0x0020)) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRWMEN (1 << 31) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETWMEN (1 << 30) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETSTP (1 << 26) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRSTP (1 << 25) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETTRX (1 << 24) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRTRX (1 << 23) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETACKDIS (1 << 22) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRACKDIS (1 << 21) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETBUM (1 << 20) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRBUM (1 << 19) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETRSC (1 << 17) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRSC (1 << 16) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETRMEN (1 << 15) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRRMEN (1 << 14) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQE (1 << 10) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQP (1 << 9) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETIRQD (1 << 8) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQE (1 << 7) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQP (1 << 6) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRIRQD (1 << 5) -#define INCA_IP_IIC_IIC_WHBSYSCON_SETAL (1 << 2) -#define INCA_IP_IIC_IIC_WHBSYSCON_CLRAL (1 << 1) - -/***I²C Bus Control Register***/ -#define INCA_IP_IIC_IIC_BUSCON_0 ((volatile u32*)(INCA_IP_IIC+ 0x0014)) -#define INCA_IP_IIC_IIC_BUSCON_0_BRPMOD (1 << 31) -#define INCA_IP_IIC_IIC_BUSCON_0_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_IIC_IIC_BUSCON_0_ICA9_0 (value) (((( 1 << 10) - 1) & (value)) << 16) -#define INCA_IP_IIC_IIC_BUSCON_0_BRP (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_BUSCON_0_SCLEN(value) (1 << value) - -#define INCA_IP_IIC_IIC_BUSCON_0_SDAEN(value) (1 << value) - - -/***I²C Bus Control Register***/ -#define INCA_IP_IIC_IIC_BUSCON_1 ((volatile u32*)(INCA_IP_IIC+ 0x0014)) -#define INCA_IP_IIC_IIC_BUSCON_1_BRPMOD (1 << 31) -#define INCA_IP_IIC_IIC_BUSCON_1_PREDIV (value) (((( 1 << 2) - 1) & (value)) << 29) -#define INCA_IP_IIC_IIC_BUSCON_1_ICA7_1 (value) (((( 1 << 7) - 1) & (value)) << 17) -#define INCA_IP_IIC_IIC_BUSCON_1_BRP (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_IIC_IIC_BUSCON_1_SCLEN(value) (1 << value) - -#define INCA_IP_IIC_IIC_BUSCON_1_SDAEN(value) (1 << value) - - -/***I²C Receive Transmit Buffer***/ -#define INCA_IP_IIC_IIC_RTB ((volatile u32*)(INCA_IP_IIC+ 0x0018)) -#define INCA_IP_IIC_IIC_RTB_RTB(value) (1 << value) - - -/***********************************************************************/ -/* Module : FB register address and bits */ -/***********************************************************************/ - -#define INCA_IP_FB (0xBF880000) -/***********************************************************************/ - - -/***FB Access Error Cause Register***/ -#define INCA_IP_FB_FB_ERRCAUSE ((volatile u32*)(INCA_IP_FB+ 0x0100)) -#define INCA_IP_FB_FB_ERRCAUSE_ERR (1 << 31) -#define INCA_IP_FB_FB_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_FB_FB_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***FB Access Error Address Register***/ -#define INCA_IP_FB_FB_ERRADDR ((volatile u32*)(INCA_IP_FB+ 0x0108)) -#define INCA_IP_FB_FB_ERRADDR_ADDR - -/***FB Configuration Register***/ -#define INCA_IP_FB_FB_CFG ((volatile u32*)(INCA_IP_FB+ 0x0800)) -#define INCA_IP_FB_FB_CFG_SVM (1 << 0) - -/***********************************************************************/ -/* Module : SRAM register address and bits */ -/***********************************************************************/ - -#define INCA_IP_SRAM (0xBF980000) -/***********************************************************************/ - - -/***SRAM Size Register***/ -#define INCA_IP_SRAM_SRAM_SIZE ((volatile u32*)(INCA_IP_SRAM+ 0x0800)) -#define INCA_IP_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : BIU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_BIU (0xBFA80000) -/***********************************************************************/ - - -/***BIU Identification Register***/ -#define INCA_IP_BIU_BIU_ID ((volatile u32*)(INCA_IP_BIU+ 0x0000)) -#define INCA_IP_BIU_BIU_ID_ARCH (1 << 16) -#define INCA_IP_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8) -#define INCA_IP_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0) - -/***BIU Access Error Cause Register***/ -#define INCA_IP_BIU_BIU_ERRCAUSE ((volatile u32*)(INCA_IP_BIU+ 0x0100)) -#define INCA_IP_BIU_BIU_ERRCAUSE_ERR (1 << 31) -#define INCA_IP_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16) -#define INCA_IP_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0) - -/***BIU Access Error Address Register***/ -#define INCA_IP_BIU_BIU_ERRADDR ((volatile u32*)(INCA_IP_BIU+ 0x0108)) -#define INCA_IP_BIU_BIU_ERRADDR_ADDR - -/***********************************************************************/ -/* Module : ICU register address and bits */ -/***********************************************************************/ - -#define INCA_IP_ICU (0xBF101000) -/***********************************************************************/ - - -/***IM0 Interrupt Status Register***/ -#define INCA_IP_ICU_IM0_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0000)) -#define INCA_IP_ICU_IM0_ISR_IR(value) (1 << value) - - -/***IM1 Interrupt Status Register***/ -#define INCA_IP_ICU_IM1_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0200)) -#define INCA_IP_ICU_IM1_ISR_IR(value) (1 << value) - - -/***IM2 Interrupt Status Register***/ -#define INCA_IP_ICU_IM2_ISR ((volatile u32*)(INCA_IP_ICU+ 0x0400)) -#define INCA_IP_ICU_IM2_ISR_IR(value) (1 << value) - - -/***IM0 Interrupt Enable Register***/ -#define INCA_IP_ICU_IM0_IER ((volatile u32*)(INCA_IP_ICU+ 0x0008)) -#define INCA_IP_ICU_IM0_IER_IR(value) (1 << value) - - -/***IM1 Interrupt Enable Register***/ -#define INCA_IP_ICU_IM1_IER ((volatile u32*)(INCA_IP_ICU+ 0x0208)) -#define INCA_IP_ICU_IM1_IER_IR(value) (1 << value) - - -/***IM2 Interrupt Enable Register***/ -#define INCA_IP_ICU_IM2_IER ((volatile u32*)(INCA_IP_ICU+ 0x0408)) -#define INCA_IP_ICU_IM2_IER_IR(value) (1 << value) - - -/***IM0 Interrupt Output Status Register***/ -#define INCA_IP_ICU_IM0_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0010)) -#define INCA_IP_ICU_IM0_IOSR_IR(value) (1 << value) - - -/***IM1 Interrupt Output Status Register***/ -#define INCA_IP_ICU_IM1_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0210)) -#define INCA_IP_ICU_IM1_IOSR_IR(value) (1 << value) - - -/***IM2 Interrupt Output Status Register***/ -#define INCA_IP_ICU_IM2_IOSR ((volatile u32*)(INCA_IP_ICU+ 0x0410)) -#define INCA_IP_ICU_IM2_IOSR_IR(value) (1 << value) - - -/***IM0 Interrupt Request Set Register***/ -#define INCA_IP_ICU_IM0_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0018)) -#define INCA_IP_ICU_IM0_IRSR_IR(value) (1 << value) - - -/***IM1 Interrupt Request Set Register***/ -#define INCA_IP_ICU_IM1_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0218)) -#define INCA_IP_ICU_IM1_IRSR_IR(value) (1 << value) - - -/***IM2 Interrupt Request Set Register***/ -#define INCA_IP_ICU_IM2_IRSR ((volatile u32*)(INCA_IP_ICU+ 0x0418)) -#define INCA_IP_ICU_IM2_IRSR_IR(value) (1 << value) - - -/***External Interrupt Control Register***/ -#define INCA_IP_ICU_ICU_EICR ((volatile u32*)(INCA_IP_ICU+ 0x0B00)) -#define INCA_IP_ICU_ICU_EICR_EII5 (value) (((( 1 << 3) - 1) & (value)) << 20) -#define INCA_IP_ICU_ICU_EICR_EII4 (value) (((( 1 << 3) - 1) & (value)) << 16) -#define INCA_IP_ICU_ICU_EICR_EII3 (value) (((( 1 << 3) - 1) & (value)) << 12) -#define INCA_IP_ICU_ICU_EICR_EII2 (value) (((( 1 << 3) - 1) & (value)) << 8) -#define INCA_IP_ICU_ICU_EICR_EII1 (value) (((( 1 << 3) - 1) & (value)) << 4) -#define INCA_IP_ICU_ICU_EICR_EII0 (value) (((( 1 << 3) - 1) & (value)) << 0) diff --git a/arch/mips/include/asm/u-boot-mips.h b/arch/mips/include/asm/u-boot-mips.h index 9f3cce9a62..a5b2fc08f8 100644 --- a/arch/mips/include/asm/u-boot-mips.h +++ b/arch/mips/include/asm/u-boot-mips.h @@ -21,5 +21,3 @@ static inline unsigned long image_copy_end(void) extern char __image_copy_end[]; return (unsigned long) &__image_copy_end; } - -extern int incaip_set_cpuclk(void); diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index 317c8258de..3200d87e30 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -103,9 +103,6 @@ init_fnc_t *init_sequence[] = { board_early_init_f, timer_init, env_init, /* initialize environment */ -#ifdef CONFIG_INCA_IP - incaip_set_cpuclk, /* set cpu clock according to env. variable */ -#endif init_baudrate, /* initialize baudrate settings */ serial_init, /* serial communications setup */ console_init_f, diff --git a/board/incaip/Makefile b/board/incaip/Makefile deleted file mode 100644 index 602d30ecee..0000000000 --- a/board/incaip/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = incaip.o flash.o -obj-y += lowlevel_init.o diff --git a/board/incaip/README b/board/incaip/README deleted file mode 100644 index 132915292e..0000000000 --- a/board/incaip/README +++ /dev/null @@ -1,57 +0,0 @@ - -Flash programming on the INCA-IP board is complicated because of the -EBU swapping unit. A BDI2000 can be used for flash programming only -if the EBU swapping unit is enabled; otherwise it will not detect the -flash memory. But the EBU swapping unit is disadbled after reset, so -if you program some code to flash with the swapping unit on, it will -not be runnable with the swapping unit off. - -The consequence is that you have to write a pre-swapped image to -flash using the BDI2000. A simple host-side tool "inca-swap-bytes" is -provided in the "tools/" directory. Use it as follows: - - bash$ ./inca-swap-bytes u-boot.bin.swp - -Note that the current BDI config file _disables_ the EBU swapping -unit for the flash bank 0. To enable it, (this is required for the -BDI flash commands to work) uncomment the following line in the -config file: - - ;WM32 0xb8000260 0x404161ff ; Swapping unit enabled - -and comment out - - WM32 0xb8000260 0x004161ff ; Swapping unit disabled - -Alternatively, you can use "mm 0xb8000260 " commands to -enable/disable the swapping unit manually. - -Just for reference, here is the complete sequence of actions we took -to install a U-Boot image into flash. - - 1. ./inca-swap-bytes u-boot.bin.swp - - 2. From BDI: - - mm 0xb8000260 0x404161ff - erase 0xb0000000 - erase 0xb0010000 - prog 0xb0000000 /tftpboot/INCA/u-boot.bin.swp bin - mm 0xb8000260 0x004161ff - go 0xb0000000 - - -Ethernet autonegotiation needs some time to complete. Instead of -delaying the boot process in all cases, we just start the -autonegotiation process when U-Boot comes up and that is all. Most -likely, it will complete by the time the network transfer is -attempted for the first time. In the worst case, if a transfer is -attempted before the autonegotiation is complete, just a single -packet would be lost resulting in a single timeout error, and then -the transfer would proceed normally. So the time that we would have -lost unconditionally waiting for the autonegotiation to complete, we -have to wait only if the file transfer is started immediately after -reset. We've verified that this works for all the clock -configurations. - -(C) 2003 Wolfgang Denk diff --git a/board/incaip/config.mk b/board/incaip/config.mk deleted file mode 100644 index e854f8e655..0000000000 --- a/board/incaip/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2003 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# INCA-IP board with MIPS 4Kc CPU core -# - -# ROM version -CONFIG_SYS_TEXT_BASE = 0xB0000000 - -# RAM version -#CONFIG_SYS_TEXT_BASE = 0x80100000 diff --git a/board/incaip/flash.c b/board/incaip/flash.c deleted file mode 100644 index a786ac9327..0000000000 --- a/board/incaip/flash.c +++ /dev/null @@ -1,655 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it - * has nothing to do with the flash chip being 8-bit or 16-bit. - */ -#ifdef CONFIG_FLASH_16BIT -typedef unsigned short FLASH_PORT_WIDTH; -typedef volatile unsigned short FLASH_PORT_WIDTHV; -#define FLASH_ID_MASK 0xFFFF -#else -typedef unsigned long FLASH_PORT_WIDTH; -typedef volatile unsigned long FLASH_PORT_WIDTHV; -#define FLASH_ID_MASK 0xFFFFFFFF -#endif - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define ORMASK(size) ((-size) & OR_AM_MSK) - -#if 0 -#define FLASH_CYCLE1 0x0555 -#define FLASH_CYCLE2 0x02aa -#else -#define FLASH_CYCLE1 0x0554 -#define FLASH_CYCLE2 0x02ab -#endif - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(FPWV *addr, flash_info_t *info); -static void flash_reset(flash_info_t *info); -static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data); -static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data); -static void flash_get_offsets(ulong base, flash_info_t *info); -static flash_info_t *flash_get_info(ulong base); - -/*----------------------------------------------------------------------- - * flash_init() - * - * sets up flash_info and returns size of FLASH (bytes) - */ -unsigned long flash_init (void) -{ - unsigned long size = 0; - int i; - - /* Init: no FLASHes known */ - for (i=0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2; - ulong * buscon = (ulong *) - ((i == 0) ? INCA_IP_EBU_EBU_BUSCON0 : INCA_IP_EBU_EBU_BUSCON2); - - /* Disable write protection */ - *buscon &= ~INCA_IP_EBU_EBU_BUSCON1_WRDIS; - -#if 1 - memset(&flash_info[i], 0, sizeof(flash_info_t)); -#endif - - flash_info[i].size = - flash_get_size((FPW *)flashbase, &flash_info[i]); - - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n", - i, flash_info[i].size); - } - - size += flash_info[i].size; - } - -#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - flash_get_info(CONFIG_SYS_MONITOR_BASE)); -#endif - -#ifdef CONFIG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1, - flash_get_info(CONFIG_ENV_ADDR)); -#endif - - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_reset(flash_info_t *info) -{ - FPWV *base = (FPWV *)(info->start[0]); - - /* Put FLASH back in read mode */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) - *base = (FPW)0x00FF00FF; /* Intel Read Mode */ - else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) - *base = (FPW)0x00F000F0; /* AMD Read Mode */ -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - /* set up sector start address table */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL - && (info->flash_id & FLASH_BTYPE)) { - int bootsect_size; /* number of bytes/boot sector */ - int sect_size; /* number of bytes/regular sector */ - - bootsect_size = 0x00002000 * (sizeof(FPW)/2); - sect_size = 0x00010000 * (sizeof(FPW)/2); - - /* set sector offsets for bottom boot block type */ - for (i = 0; i < 8; ++i) { - info->start[i] = base + (i * bootsect_size); - } - for (i = 8; i < info->sector_count; i++) { - info->start[i] = base + ((i - 7) * sect_size); - } - } - else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD - && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) { - - int sect_size; /* number of bytes/sector */ - - sect_size = 0x00010000 * (sizeof(FPW)/2); - - /* set up sector start address table (uniform sector type) */ - for( i = 0; i < info->sector_count; i++ ) - info->start[i] = base + (i * sect_size); - } -} - -/*----------------------------------------------------------------------- - */ - -static flash_info_t *flash_get_info(ulong base) -{ - int i; - flash_info_t * info; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) { - info = & flash_info[i]; - if (info->start[0] <= base && base < info->start[0] + info->size) - break; - } - - return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info; -} - -/*----------------------------------------------------------------------- - */ - -void flash_print_info (flash_info_t *info) -{ - int i; - uchar *boottype; - uchar *bootletter; - char *fmt; - uchar botbootletter[] = "B"; - uchar topbootletter[] = "T"; - uchar botboottype[] = "bottom boot sector"; - uchar topboottype[] = "top boot sector"; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_SST: printf ("SST "); break; - case FLASH_MAN_STM: printf ("STM "); break; - case FLASH_MAN_INTEL: printf ("INTEL "); break; - default: printf ("Unknown Vendor "); break; - } - - /* check for top or bottom boot, if it applies */ - if (info->flash_id & FLASH_BTYPE) { - boottype = botboottype; - bootletter = botbootletter; - } - else { - boottype = topboottype; - bootletter = topbootletter; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM640U: - fmt = "29LV641D (64 Mbit, uniform sectors)\n"; - break; - case FLASH_28F800C3B: - case FLASH_28F800C3T: - fmt = "28F800C3%s (8 Mbit, %s)\n"; - break; - case FLASH_INTEL800B: - case FLASH_INTEL800T: - fmt = "28F800B3%s (8 Mbit, %s)\n"; - break; - case FLASH_28F160C3B: - case FLASH_28F160C3T: - fmt = "28F160C3%s (16 Mbit, %s)\n"; - break; - case FLASH_INTEL160B: - case FLASH_INTEL160T: - fmt = "28F160B3%s (16 Mbit, %s)\n"; - break; - case FLASH_28F320C3B: - case FLASH_28F320C3T: - fmt = "28F320C3%s (32 Mbit, %s)\n"; - break; - case FLASH_INTEL320B: - case FLASH_INTEL320T: - fmt = "28F320B3%s (32 Mbit, %s)\n"; - break; - case FLASH_28F640C3B: - case FLASH_28F640C3T: - fmt = "28F640C3%s (64 Mbit, %s)\n"; - break; - case FLASH_INTEL640B: - case FLASH_INTEL640T: - fmt = "28F640B3%s (64 Mbit, %s)\n"; - break; - default: - fmt = "Unknown Chip Type\n"; - break; - } - - printf (fmt, bootletter, boottype); - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, - info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) { - printf ("\n "); - } - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -ulong flash_get_size (FPWV *addr, flash_info_t *info) -{ - /* Write auto select command: read Manufacturer ID */ - - /* Write auto select command sequence and test FLASH answer */ - addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */ - - /* The manufacturer codes are only 1 byte, so just use 1 byte. - * This works for any bus width and any FLASH device width. - */ - switch (addr[1] & 0xff) { - - case (uchar)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - - case (uchar)INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - - /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ - if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) { - - case (FPW)AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */ - info->flash_id += FLASH_AM640U; - info->sector_count = 128; - info->size = 0x00800000 * (sizeof(FPW)/2); - break; /* => 8 or 16 MB */ - - case (FPW)INTEL_ID_28F800C3B: - info->flash_id += FLASH_28F800C3B; - info->sector_count = 23; - info->size = 0x00100000 * (sizeof(FPW)/2); - break; /* => 1 or 2 MB */ - - case (FPW)INTEL_ID_28F800B3B: - info->flash_id += FLASH_INTEL800B; - info->sector_count = 23; - info->size = 0x00100000 * (sizeof(FPW)/2); - break; /* => 1 or 2 MB */ - - case (FPW)INTEL_ID_28F160C3B: - info->flash_id += FLASH_28F160C3B; - info->sector_count = 39; - info->size = 0x00200000 * (sizeof(FPW)/2); - break; /* => 2 or 4 MB */ - - case (FPW)INTEL_ID_28F160B3B: - info->flash_id += FLASH_INTEL160B; - info->sector_count = 39; - info->size = 0x00200000 * (sizeof(FPW)/2); - break; /* => 2 or 4 MB */ - - case (FPW)INTEL_ID_28F320C3B: - info->flash_id += FLASH_28F320C3B; - info->sector_count = 71; - info->size = 0x00400000 * (sizeof(FPW)/2); - break; /* => 4 or 8 MB */ - - case (FPW)INTEL_ID_28F320B3B: - info->flash_id += FLASH_INTEL320B; - info->sector_count = 71; - info->size = 0x00400000 * (sizeof(FPW)/2); - break; /* => 4 or 8 MB */ - - case (FPW)INTEL_ID_28F640C3B: - info->flash_id += FLASH_28F640C3B; - info->sector_count = 135; - info->size = 0x00800000 * (sizeof(FPW)/2); - break; /* => 8 or 16 MB */ - - case (FPW)INTEL_ID_28F640B3B: - info->flash_id += FLASH_INTEL640B; - info->sector_count = 135; - info->size = 0x00800000 * (sizeof(FPW)/2); - break; /* => 8 or 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* => no or unknown flash */ - } - - flash_get_offsets((ulong)addr, info); - - /* Put FLASH back in read mode */ - flash_reset(info); - - return (info->size); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - FPWV *addr; - int flag, prot, sect; - int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL; - ulong start, now, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_INTEL800B: - case FLASH_INTEL160B: - case FLASH_INTEL320B: - case FLASH_INTEL640B: - case FLASH_28F800C3B: - case FLASH_28F160C3B: - case FLASH_28F320C3B: - case FLASH_28F640C3B: - case FLASH_AM640U: - break; - case FLASH_UNKNOWN: - default: - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - last = get_timer(0); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && rcode == 0; sect++) { - - if (info->protect[sect] != 0) /* protected, skip it */ - continue; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr = (FPWV *)(info->start[sect]); - if (intel) { - *addr = (FPW)0x00500050; /* clear status register */ - *addr = (FPW)0x00200020; /* erase setup */ - *addr = (FPW)0x00D000D0; /* erase confirm */ - } - else { - /* must be AMD style if not Intel */ - FPWV *base; /* first address in bank */ - - base = (FPWV *)(info->start[0]); - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */ - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - *addr = (FPW)0x00300030; /* erase sector */ - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - /* wait at least 50us for AMD, 80us for Intel. - * Let's wait 1 ms. - */ - udelay (1000); - - while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - - if (intel) { - /* suspend erase */ - *addr = (FPW)0x00B000B0; - } - - flash_reset(info); /* reset to read mode */ - rcode = 1; /* failed */ - break; - } - - /* show that we're waiting */ - if ((get_timer(last)) > CONFIG_SYS_HZ) {/* every second */ - putc ('.'); - last = get_timer(0); - } - } - - /* show that we're waiting */ - if ((get_timer(last)) > CONFIG_SYS_HZ) { /* every second */ - putc ('.'); - last = get_timer(0); - } - - flash_reset(info); /* reset to read mode */ - } - - printf (" done\n"); - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof(data), left -= sizeof(data) - bytes) { - - bytes = addr & (sizeof(data) - 1); - addr &= ~(sizeof(data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof(data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left ) - data += *((uchar *)addr + i); - else - data += *src++; - } - - /* write one word to the flash */ - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - res = write_word_amd(info, (FPWV *)addr, data); - break; - case FLASH_MAN_INTEL: - res = write_word_intel(info, (FPWV *)addr, data); - break; - default: - /* unknown flash type, error! */ - printf ("missing or unknown FLASH type\n"); - res = 1; /* not really a timeout, but gives error */ - break; - } - } - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - - base = (FPWV *)(info->start[0]); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer (0); - - /* data polling for D7 */ - while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW)0x00F000F0; /* reset bank */ - res = 1; - } - } - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for Intel FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - *dest = (FPW)0x00500050; /* clear status register */ - *dest = (FPW)0x00FF00FF; /* make sure in read mode */ - *dest = (FPW)0x00400040; /* program setup */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer (0); - - while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) { - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - *dest = (FPW)0x00B000B0; /* Suspend program */ - res = 1; - } - } - - if (res == 0 && (*dest & (FPW)0x00100010)) - res = 1; /* write failed, time out error is close enough */ - - *dest = (FPW)0x00500050; /* clear status register */ - *dest = (FPW)0x00FF00FF; /* make sure in read mode */ - - return (res); -} diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c deleted file mode 100644 index 217b8afa34..0000000000 --- a/board/incaip/incaip.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include - -extern uint incaip_get_cpuclk(void); - -void _machine_restart(void) -{ - *INCA_IP_WDT_RST_REQ = 0x3f; -} - -static ulong max_sdram_size(void) -{ - /* The only supported SDRAM data width is 16bit. - */ -#define CONFIG_SYS_DW 2 - - /* The only supported number of SDRAM banks is 4. - */ -#define CONFIG_SYS_NB 4 - - ulong cfgpb0 = *INCA_IP_SDRAM_MC_CFGPB0; - int cols = cfgpb0 & 0xF; - int rows = (cfgpb0 & 0xF0) >> 4; - ulong size = (1 << (rows + cols)) * CONFIG_SYS_DW * CONFIG_SYS_NB; - - return size; -} - -phys_size_t initdram(int board_type) -{ - int rows, cols, best_val = *INCA_IP_SDRAM_MC_CFGPB0; - ulong size, max_size = 0; - ulong our_address; - - asm volatile ("move %0, $25" : "=r" (our_address) :); - - /* Can't probe for RAM size unless we are running from Flash. - */ - if (CPHYSADDR(our_address) < CPHYSADDR(PHYS_FLASH_1)) - { - return max_sdram_size(); - } - - for (cols = 0x8; cols <= 0xC; cols++) - { - for (rows = 0xB; rows <= 0xD; rows++) - { - *INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) | - (rows << 4) | cols; - size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, - max_sdram_size()); - - if (size > max_size) - { - best_val = *INCA_IP_SDRAM_MC_CFGPB0; - max_size = size; - } - } - } - - *INCA_IP_SDRAM_MC_CFGPB0 = best_val; - return max_size; -} - -int checkboard (void) -{ - unsigned long chipid = *INCA_IP_WDT_CHIPID; - int part_num; - - puts ("Board: INCA-IP "); - part_num = (chipid >> 12) & 0xffff; - switch (part_num) { - case 0xc0: - printf ("Standard Version, "); - break; - case 0xc1: - printf ("Basic Version, "); - break; - default: - printf ("Unknown Part Number 0x%x ", part_num); - break; - } - - printf ("Chip V1.%ld, ", (chipid >> 28)); - - printf("CPU Speed %d MHz\n", incaip_get_cpuclk()/1000000); - - set_io_port_base(0); - - return 0; -} - -#if defined(CONFIG_INCA_IP_SWITCH) -int board_eth_init(bd_t *bis) -{ - return inca_switch_initialize(bis); -} -#endif diff --git a/board/incaip/lowlevel_init.S b/board/incaip/lowlevel_init.S deleted file mode 100644 index b6cf6a9960..0000000000 --- a/board/incaip/lowlevel_init.S +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Memory sub-system initialization code for INCA-IP development board. - * - * Copyright (c) 2003 Wolfgang Denk - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - - -#define EBU_MODUL_BASE 0xB8000200 -#define EBU_CLC(value) 0x0000(value) -#define EBU_CON(value) 0x0010(value) -#define EBU_ADDSEL0(value) 0x0020(value) -#define EBU_ADDSEL1(value) 0x0024(value) -#define EBU_ADDSEL2(value) 0x0028(value) -#define EBU_BUSCON0(value) 0x0060(value) -#define EBU_BUSCON1(value) 0x0064(value) -#define EBU_BUSCON2(value) 0x0068(value) - -#define MC_MODUL_BASE 0xBF800000 -#define MC_ERRCAUSE(value) 0x0100(value) -#define MC_ERRADDR(value) 0x0108(value) -#define MC_IOGP(value) 0x0800(value) -#define MC_SELFRFSH(value) 0x0A00(value) -#define MC_CTRLENA(value) 0x1000(value) -#define MC_MRSCODE(value) 0x1008(value) -#define MC_CFGDW(value) 0x1010(value) -#define MC_CFGPB0(value) 0x1018(value) -#define MC_LATENCY(value) 0x1038(value) -#define MC_TREFRESH(value) 0x1040(value) - -#define CGU_MODUL_BASE 0xBF107000 -#define CGU_PLL1CR(value) 0x0008(value) -#define CGU_DIVCR(value) 0x0010(value) -#define CGU_MUXCR(value) 0x0014(value) -#define CGU_PLL1SR(value) 0x000C(value) - - .set noreorder - - -/* - * void ebu_init(long) - * - * a0 has the clock value we are going to run at - */ - .globl ebu_init - .ent ebu_init -ebu_init: -__ebu_init: - - li t1, EBU_MODUL_BASE - li t2, 0xA0000041 - sw t2, EBU_ADDSEL0(t1) - li t2, 0xA0800041 - sw t2, EBU_ADDSEL2(t1) - li t2, 0xBE0000F1 - sw t2, EBU_ADDSEL1(t1) - - li t3, 100000000 - beq a0, t3, 1f - nop - li t3, 133000000 - beq a0, t3, 2f - nop - li t3, 150000000 - beq a0, t3, 2f - nop - b 3f - nop - - /* 100 MHz */ -1: - li t2, 0x8841417D - sw t2, EBU_BUSCON0(t1) - sw t2, EBU_BUSCON2(t1) - li t2, 0x684142BD - b 3f - sw t2, EBU_BUSCON1(t1) /* delay slot */ - - /* 133 or 150 MHz */ -2: - li t2, 0x8841417E - sw t2, EBU_BUSCON0(t1) - sw t2, EBU_BUSCON2(t1) - li t2, 0x684143FD - sw t2, EBU_BUSCON1(t1) -3: - jr ra - nop - - .end ebu_init - - -/* - * void cgu_init(long) - * - * a0 has the clock value - */ - .globl cgu_init - .ent cgu_init -cgu_init: -__cgu_init: - - li t1, CGU_MODUL_BASE - - li t3, 100000000 - beq a0, t3, 1f - nop - li t3, 133000000 - beq a0, t3, 2f - nop - li t3, 150000000 - beq a0, t3, 3f - nop - b 5f - nop - - /* 100 MHz clock */ -1: - li t2, 0x80000014 - sw t2, CGU_DIVCR(t1) - li t2, 0x80000000 - sw t2, CGU_MUXCR(t1) - li t2, 0x800B0001 - b 5f - sw t2, CGU_PLL1CR(t1) /* delay slot */ - - /* 133 MHz clock */ -2: - li t2, 0x80000054 - sw t2, CGU_DIVCR(t1) - li t2, 0x80000000 - sw t2, CGU_MUXCR(t1) - li t2, 0x800B0001 - b 5f - sw t2, CGU_PLL1CR(t1) /* delay slot */ - - /* 150 MHz clock */ -3: - li t2, 0x80000017 - sw t2, CGU_DIVCR(t1) - li t2, 0xC00B0001 - sw t2, CGU_PLL1CR(t1) - li t3, 0x80000000 -4: - lw t2, CGU_PLL1SR(t1) - and t2, t2, t3 - beq t2, zero, 4b - nop - li t2, 0x80000001 - sw t2, CGU_MUXCR(t1) -5: - jr ra - nop - - .end cgu_init - - -/* - * void sdram_init(long) - * - * a0 has the clock value - */ - .globl sdram_init - .ent sdram_init -sdram_init: -__sdram_init: - - li t1, MC_MODUL_BASE - -#if 0 - /* Disable memory controller before changing any of its registers */ - sw zero, MC_CTRLENA(t1) -#endif - - li t2, 100000000 - beq a0, t2, 1f - nop - li t2, 133000000 - beq a0, t2, 2f - nop - li t2, 150000000 - beq a0, t2, 3f - nop - b 5f - nop - - /* 100 MHz clock */ -1: - /* Set clock ratio (clkrat=1:1, rddel=3) */ - li t2, 0x00000003 - sw t2, MC_IOGP(t1) - - /* Set sdram refresh rate (4K/64ms @ 100MHz) */ - li t2, 0x0000061A - b 4f - sw t2, MC_TREFRESH(t1) - - /* 133 MHz clock */ -2: - /* Set clock ratio (clkrat=1:1, rddel=3) */ - li t2, 0x00000003 - sw t2, MC_IOGP(t1) - - /* Set sdram refresh rate (4K/64ms @ 133MHz) */ - li t2, 0x00000822 - b 4f - sw t2, MC_TREFRESH(t1) - - /* 150 MHz clock */ -3: - /* Set clock ratio (clkrat=3:2, rddel=4) */ - li t2, 0x00000014 - sw t2, MC_IOGP(t1) - - /* Set sdram refresh rate (4K/64ms @ 150MHz) */ - li t2, 0x00000927 - sw t2, MC_TREFRESH(t1) - -4: - /* Clear Error log registers */ - sw zero, MC_ERRCAUSE(t1) - sw zero, MC_ERRADDR(t1) - - /* Clear Power-down registers */ - sw zero, MC_SELFRFSH(t1) - - /* Set CAS Latency */ - li t2, 0x00000020 /* CL = 2 */ - sw t2, MC_MRSCODE(t1) - - /* Set word width to 16 bit */ - li t2, 0x2 - sw t2, MC_CFGDW(t1) - - /* Set CS0 to SDRAM parameters */ - li t2, 0x000014C9 - sw t2, MC_CFGPB0(t1) - - /* Set SDRAM latency parameters */ - li t2, 0x00026325 /* BC PC100 */ - sw t2, MC_LATENCY(t1) - -5: - /* Finally enable the controller */ - li t2, 0x00000001 - sw t2, MC_CTRLENA(t1) - - jr ra - nop - - .end sdram_init - - - .globl lowlevel_init - .ent lowlevel_init -lowlevel_init: - - /* Disable Watchdog. - */ - la t9, disable_incaip_wdt - jalr t9 - nop - - /* EBU, CGU and SDRAM Initialization. - */ - li a0, CONFIG_CPU_CLOCK_RATE - move t0, ra - - /* We rely on the fact that neither ebu_init() nor cgu_init() nor sdram_init() - * modify t0 and a0. - */ - bal __cgu_init - nop - bal __ebu_init - nop - bal __sdram_init - nop - move ra, t0 - - jr ra - nop - - .end lowlevel_init diff --git a/boards.cfg b/boards.cfg index c83aff3b14..f1f699458b 100644 --- a/boards.cfg +++ b/boards.cfg @@ -519,10 +519,6 @@ Active mips mips32 au1x00 - dbau1x00 Active mips mips32 au1x00 - dbau1x00 dbau1550 dbau1x00:DBAU1550 Thomas Lange Active mips mips32 au1x00 - dbau1x00 dbau1550_el dbau1x00:DBAU1550,SYS_LITTLE_ENDIAN Thomas Lange Active mips mips32 au1x00 - pb1x00 pb1000 pb1x00:PB1000 - -Active mips mips32 incaip - incaip incaip - Wolfgang Denk -Active mips mips32 incaip - incaip incaip_100MHz incaip:CPU_CLOCK_RATE=100000000 Wolfgang Denk -Active mips mips32 incaip - incaip incaip_133MHz incaip:CPU_CLOCK_RATE=133000000 Wolfgang Denk -Active mips mips32 incaip - incaip incaip_150MHz incaip:CPU_CLOCK_RATE=150000000 Wolfgang Denk Active mips mips64 - - qemu-mips qemu_mips64 qemu-mips64:SYS_BIG_ENDIAN - Active mips mips64 - - qemu-mips qemu_mips64el qemu-mips64:SYS_LITTLE_ENDIAN - Active nds32 n1213 ag101 AndesTech adp-ag101 adp-ag101 - Andes diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 15c39e7675..f9742e7d49 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -125,3 +125,4 @@ MVS1 powerpc MPC823 306620b 2008-08-26 Andre Schwar adsvix ARM PXA27x 7610db1 2008-07-30 Adrian Filipi R5200 ColdFire - 48ead7a 2008-03-31 Zachary P. Landau CPCI440 powerpc 440GP b568fd2 2007-12-27 Matthias Fuchs +incaip mips mips32 - 2014-04-17 Wolfgang Denk diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 7f9ce90a6d..c25b3c93ce 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_FTGMAC100) += ftgmac100.o obj-$(CONFIG_FTMAC110) += ftmac110.o obj-$(CONFIG_FTMAC100) += ftmac100.o obj-$(CONFIG_GRETH) += greth.o -obj-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o obj-$(CONFIG_DRIVER_KS8695ETH) += ks8695eth.o obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_LAN91C96) += lan91c96.o diff --git a/drivers/net/inca-ip_sw.c b/drivers/net/inca-ip_sw.c deleted file mode 100644 index cdfbfa67d8..0000000000 --- a/drivers/net/inca-ip_sw.c +++ /dev/null @@ -1,793 +0,0 @@ -/* - * INCA-IP internal switch ethernet driver. - * - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - - -#include - -#include -#include -#include -#include -#include - - -#define NUM_RX_DESC PKTBUFSRX -#define NUM_TX_DESC 3 -#define TOUT_LOOP 1000000 - - -#define DELAY udelay(10000) - /* Sometimes the store word instruction hangs while writing to one - * of the Switch registers. Moving the instruction into a separate - * function somehow makes the problem go away. - */ -static void SWORD(volatile u32 * reg, u32 value) -{ - *reg = value; -} - -#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value; -#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg) -#define SW_WRITE_REG(reg, value) \ - SWORD(reg, value);\ - DELAY;\ - SWORD(reg, value); - -#define SW_READ_REG(reg, value) \ - value = (u32)*((volatile u32*)reg);\ - DELAY;\ - value = (u32)*((volatile u32*)reg); - -#define INCA_DMA_TX_POLLING_TIME 0x07 -#define INCA_DMA_RX_POLLING_TIME 0x07 - -#define INCA_DMA_TX_HOLD 0x80000000 -#define INCA_DMA_TX_EOP 0x40000000 -#define INCA_DMA_TX_SOP 0x20000000 -#define INCA_DMA_TX_ICPT 0x10000000 -#define INCA_DMA_TX_IEOP 0x08000000 - -#define INCA_DMA_RX_C 0x80000000 -#define INCA_DMA_RX_SOP 0x40000000 -#define INCA_DMA_RX_EOP 0x20000000 - -#define INCA_SWITCH_PHY_SPEED_10H 0x1 -#define INCA_SWITCH_PHY_SPEED_10F 0x5 -#define INCA_SWITCH_PHY_SPEED_100H 0x2 -#define INCA_SWITCH_PHY_SPEED_100F 0x6 - -/************************ Auto MDIX settings ************************/ -#define INCA_IP_AUTO_MDIX_LAN_PORTS_DIR INCA_IP_Ports_P1_DIR -#define INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL INCA_IP_Ports_P1_ALTSEL -#define INCA_IP_AUTO_MDIX_LAN_PORTS_OUT INCA_IP_Ports_P1_OUT -#define INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX 16 - -#define WAIT_SIGNAL_RETRIES 100 -#define WAIT_LINK_RETRIES 100 -#define LINK_RETRY_DELAY 2000 /* ms */ -/********************************************************************/ - -typedef struct -{ - union { - struct { - volatile u32 HOLD :1; - volatile u32 ICpt :1; - volatile u32 IEop :1; - volatile u32 offset :3; - volatile u32 reserved0 :4; - volatile u32 NFB :22; - }field; - - volatile u32 word; - }params; - - volatile u32 nextRxDescPtr; - - volatile u32 RxDataPtr; - - union { - struct { - volatile u32 C :1; - volatile u32 Sop :1; - volatile u32 Eop :1; - volatile u32 reserved3 :12; - volatile u32 NBT :17; - }field; - - volatile u32 word; - }status; - -} inca_rx_descriptor_t; - - -typedef struct -{ - union { - struct { - volatile u32 HOLD :1; - volatile u32 Eop :1; - volatile u32 Sop :1; - volatile u32 ICpt :1; - volatile u32 IEop :1; - volatile u32 reserved0 :5; - volatile u32 NBA :22; - }field; - - volatile u32 word; - }params; - - volatile u32 nextTxDescPtr; - - volatile u32 TxDataPtr; - - volatile u32 C :1; - volatile u32 reserved3 :31; - -} inca_tx_descriptor_t; - - -static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16))); -static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16))); - -static int tx_new, rx_new, tx_hold, rx_hold; -static int tx_old_hold = -1; -static int initialized = 0; - - -static int inca_switch_init(struct eth_device *dev, bd_t * bis); -static int inca_switch_send(struct eth_device *dev, void *packet, int length); -static int inca_switch_recv(struct eth_device *dev); -static void inca_switch_halt(struct eth_device *dev); -static void inca_init_switch_chip(void); -static void inca_dma_init(void); -static int inca_amdix(void); - - -int inca_switch_initialize(bd_t * bis) -{ - struct eth_device *dev; - -#if 0 - printf("Entered inca_switch_initialize()\n"); -#endif - - if (!(dev = (struct eth_device *) malloc (sizeof *dev))) { - printf("Failed to allocate memory\n"); - return 0; - } - memset(dev, 0, sizeof(*dev)); - - inca_dma_init(); - - inca_init_switch_chip(); - -#if defined(CONFIG_INCA_IP_SWITCH_AMDIX) - inca_amdix(); -#endif - - sprintf(dev->name, "INCA-IP Switch"); - dev->init = inca_switch_init; - dev->halt = inca_switch_halt; - dev->send = inca_switch_send; - dev->recv = inca_switch_recv; - - eth_register(dev); - -#if 0 - printf("Leaving inca_switch_initialize()\n"); -#endif - - return 0; -} - - -static int inca_switch_init(struct eth_device *dev, bd_t * bis) -{ - int i; - u32 v, regValue; - u16 wTmp; - -#if 0 - printf("Entering inca_switch_init()\n"); -#endif - - /* Set MAC address. - */ - wTmp = (u16)dev->enetaddr[0]; - regValue = (wTmp << 8) | dev->enetaddr[1]; - - SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue); - - wTmp = (u16)dev->enetaddr[2]; - regValue = (wTmp << 8) | dev->enetaddr[3]; - regValue = regValue << 16; - wTmp = (u16)dev->enetaddr[4]; - regValue |= (wTmp<<8) | dev->enetaddr[5]; - - SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue); - - /* Initialize the descriptor rings. - */ - for (i = 0; i < NUM_RX_DESC; i++) { - inca_rx_descriptor_t * rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[i]); - memset(rx_desc, 0, sizeof(rx_ring[i])); - - /* Set maximum size of receive buffer. - */ - rx_desc->params.field.NFB = PKTSIZE_ALIGN; - - /* Set the offset of the receive buffer. Zero means - * that the offset mechanism is not used. - */ - rx_desc->params.field.offset = 0; - - /* Check if it is the last descriptor. - */ - if (i == (NUM_RX_DESC - 1)) { - /* Let the last descriptor point to the first - * one. - */ - rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(rx_ring); - } else { - /* Set the address of the next descriptor. - */ - rx_desc->nextRxDescPtr = (u32)CKSEG1ADDR(&rx_ring[i+1]); - } - - rx_desc->RxDataPtr = (u32)CKSEG1ADDR(NetRxPackets[i]); - } - -#if 0 - printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]); - printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]); -#endif - - for (i = 0; i < NUM_TX_DESC; i++) { - inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[i]); - - memset(tx_desc, 0, sizeof(tx_ring[i])); - - tx_desc->params.word = 0; - tx_desc->params.field.HOLD = 1; - tx_desc->C = 1; - - /* Check if it is the last descriptor. - */ - if (i == (NUM_TX_DESC - 1)) { - /* Let the last descriptor point to the - * first one. - */ - tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(tx_ring); - } else { - /* Set the address of the next descriptor. - */ - tx_desc->nextTxDescPtr = (u32)CKSEG1ADDR(&tx_ring[i+1]); - } - } - - /* Initialize RxDMA. - */ - DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v); - debug("RX status = 0x%08X\n", v); - - /* Writing to the FRDA of CHANNEL. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring); - - /* Writing to the COMMAND REG. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_INIT); - - /* Initialize TxDMA. - */ - DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v); - debug("TX status = 0x%08X\n", v); - - /* Writing to the FRDA of CHANNEL. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring); - - tx_new = rx_new = 0; - - tx_hold = NUM_TX_DESC - 1; - rx_hold = NUM_RX_DESC - 1; - -#if 0 - rx_ring[rx_hold].params.field.HOLD = 1; -#endif - /* enable spanning tree forwarding, enable the CPU port */ - /* ST_PT: - * CPS (CPU port status) 0x3 (forwarding) - * LPS (LAN port status) 0x3 (forwarding) - * PPS (PC port status) 0x3 (forwarding) - */ - SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f); - -#if 0 - printf("Leaving inca_switch_init()\n"); -#endif - - return 0; -} - - -static int inca_switch_send(struct eth_device *dev, void *packet, int length) -{ - int i; - int res = -1; - u32 command; - u32 regValue; - inca_tx_descriptor_t * tx_desc = (inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_new]); - -#if 0 - printf("Entered inca_switch_send()\n"); -#endif - - if (length <= 0) { - printf ("%s: bad packet size: %d\n", dev->name, length); - goto Done; - } - - for(i = 0; tx_desc->C == 0; i++) { - if (i >= TOUT_LOOP) { - printf("%s: tx error buffer not ready\n", dev->name); - goto Done; - } - } - - if (tx_old_hold >= 0) { - ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_old_hold]))->params.field.HOLD = 1; - } - tx_old_hold = tx_hold; - - tx_desc->params.word = - (INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD); - - tx_desc->C = 0; - tx_desc->TxDataPtr = (u32)packet; - tx_desc->params.field.NBA = length; - - ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->params.field.HOLD = 0; - - tx_hold = tx_new; - tx_new = (tx_new + 1) % NUM_TX_DESC; - - - if (! initialized) { - command = INCA_IP_DMA_DMA_TXCCR0_INIT; - initialized = 1; - } else { - command = INCA_IP_DMA_DMA_TXCCR0_HR; - } - - DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue); - regValue |= command; -#if 0 - printf("regValue = 0x%x\n", regValue); -#endif - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue); - -#if 1 - for(i = 0; ((inca_tx_descriptor_t *)CKSEG1ADDR(&tx_ring[tx_hold]))->C == 0; i++) { - if (i >= TOUT_LOOP) { - printf("%s: tx buffer not ready\n", dev->name); - goto Done; - } - } -#endif - res = length; -Done: -#if 0 - printf("Leaving inca_switch_send()\n"); -#endif - return res; -} - - -static int inca_switch_recv(struct eth_device *dev) -{ - int length = 0; - inca_rx_descriptor_t * rx_desc; - -#if 0 - printf("Entered inca_switch_recv()\n"); -#endif - - for (;;) { - rx_desc = (inca_rx_descriptor_t *)CKSEG1ADDR(&rx_ring[rx_new]); - - if (rx_desc->status.field.C == 0) { - break; - } - -#if 0 - rx_ring[rx_new].params.field.HOLD = 1; -#endif - - if (! rx_desc->status.field.Eop) { - printf("Partly received packet!!!\n"); - break; - } - - length = rx_desc->status.field.NBT; - rx_desc->status.word &= - ~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C); -#if 0 -{ - int i; - for (i=0;iparams.field.HOLD = 0; - - rx_hold = rx_new; - - rx_new = (rx_new + 1) % NUM_RX_DESC; - } - -#if 0 - printf("Leaving inca_switch_recv()\n"); -#endif - - return length; -} - - -static void inca_switch_halt(struct eth_device *dev) -{ -#if 0 - printf("Entered inca_switch_halt()\n"); -#endif - -#if 1 - initialized = 0; -#endif -#if 1 - /* Disable forwarding to the CPU port. - */ - SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf); - - /* Close RxDMA channel. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); - - /* Close TxDMA channel. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF); - - -#endif -#if 0 - printf("Leaving inca_switch_halt()\n"); -#endif -} - - -static void inca_init_switch_chip(void) -{ - u32 regValue; - - /* To workaround a problem with collision counter - * (see Errata sheet). - */ - SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001); - SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001); - -#if 1 - /* init MDIO configuration: - * MDS (Poll speed): 0x01 (4ms) - * PHY_LAN_ADDR: 0x06 - * PHY_PC_ADDR: 0x05 - * UEP (Use External PHY): 0x00 (Internal PHY is used) - * PS (Port Select): 0x00 (PT/UMM for LAN) - * PT (PHY Test): 0x00 (no test mode) - * UMM (Use MDIO Mode): 0x00 (state machine is disabled) - */ - SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50); - - /* init PHY: - * SL (Auto Neg. Speed for LAN) - * SP (Auto Neg. Speed for PC) - * LL (Link Status for LAN) - * LP (Link Status for PC) - * DL (Duplex Status for LAN) - * DP (Duplex Status for PC) - * PL (Auto Neg. Pause Status for LAN) - * PP (Auto Neg. Pause Status for PC) - */ - SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff); - - /* MDIO_ACC: - * RA (Request/Ack) 0x01 (Request) - * RW (Read/Write) 0x01 (Write) - * PHY_ADDR 0x05 (PC) - * REG_ADDR 0x00 (PHY_BCR: basic control register) - * PHY_DATA 0x8000 - * Reset - software reset - * LB (loop back) - normal - * SS (speed select) - 10 Mbit/s - * ANE (auto neg. enable) - enable - * PD (power down) - normal - * ISO (isolate) - normal - * RAN (restart auto neg.) - normal - * DM (duplex mode) - half duplex - * CT (collision test) - enable - */ - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a09000); - - /* MDIO_ACC: - * RA (Request/Ack) 0x01 (Request) - * RW (Read/Write) 0x01 (Write) - * PHY_ADDR 0x06 (LAN) - * REG_ADDR 0x00 (PHY_BCR: basic control register) - * PHY_DATA 0x8000 - * Reset - software reset - * LB (loop back) - normal - * SS (speed select) - 10 Mbit/s - * ANE (auto neg. enable) - enable - * PD (power down) - normal - * ISO (isolate) - normal - * RAN (restart auto neg.) - normal - * DM (duplex mode) - half duplex - * CT (collision test) - enable - */ - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c09000); - -#endif - - /* Make sure the CPU port is disabled for now. We - * don't want packets to get stacked for us until - * we enable DMA and are prepared to receive them. - */ - SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf); - - SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue); - - /* CRC GEN is enabled. - */ - regValue |= 0x00000200; - SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue); - - /* ADD TAG is disabled. - */ - SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue); - regValue &= ~0x00000002; - SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue); -} - - -static void inca_dma_init(void) -{ - /* Switch off all DMA channels. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF); - - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF); - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF); - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF); - - /* Setup TX channel polling time. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME); - - /* Setup RX channel polling time. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME); - - /* ERRATA: write reset value into the DMA RX IMR register. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF); - - /* Just in case: disable all transmit interrupts also. - */ - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF); - - DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF); - DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF); -} - -#if defined(CONFIG_INCA_IP_SWITCH_AMDIX) -static int inca_amdix(void) -{ - u32 phyReg1 = 0; - u32 phyReg4 = 0; - u32 phyReg5 = 0; - u32 phyReg6 = 0; - u32 phyReg31 = 0; - u32 regEphy = 0; - int mdi_flag; - int retries; - - /* Setup GPIO pins. - */ - *INCA_IP_AUTO_MDIX_LAN_PORTS_DIR |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - *INCA_IP_AUTO_MDIX_LAN_PORTS_ALTSEL |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - -#if 0 - /* Wait for signal. - */ - retries = WAIT_SIGNAL_RETRIES; - while (--retries) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (17 << 16)); /* PHY_MCSR */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1); - } while (phyReg1 & (1 << 31)); - - if (phyReg1 & (1 << 1)) { - /* Signal detected */ - break; - } - } - - if (!retries) - goto Fail; -#endif - - /* Set MDI mode. - */ - *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - mdi_flag = 1; - - /* Wait for link. - */ - retries = WAIT_LINK_RETRIES; - while (--retries) { - udelay(LINK_RETRY_DELAY * 1000); - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (1 << 16)); /* PHY_BSR */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1); - } while (phyReg1 & (1 << 31)); - - if (phyReg1 & (1 << 2)) { - /* Link is up */ - break; - } else if (mdi_flag) { - /* Set MDIX mode */ - *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT |= (1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - mdi_flag = 0; - } else { - /* Set MDI mode */ - *INCA_IP_AUTO_MDIX_LAN_PORTS_OUT &= ~(1 << INCA_IP_AUTO_MDIX_LAN_GPIO_PIN_RXTX); - mdi_flag = 1; - } - } - - if (!retries) { - goto Fail; - } else { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (1 << 16)); /* PHY_BSR */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg1); - } while (phyReg1 & (1 << 31)); - - /* Auto-negotiation / Parallel detection complete - */ - if (phyReg1 & (1 << 5)) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (31 << 16)); /* PHY_SCSR */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg31); - } while (phyReg31 & (1 << 31)); - - switch ((phyReg31 >> 2) & 0x7) { - case INCA_SWITCH_PHY_SPEED_10H: - /* 10Base-T Half-duplex */ - regEphy = 0; - break; - case INCA_SWITCH_PHY_SPEED_10F: - /* 10Base-T Full-duplex */ - regEphy = INCA_IP_Switch_EPHY_DL; - break; - case INCA_SWITCH_PHY_SPEED_100H: - /* 100Base-TX Half-duplex */ - regEphy = INCA_IP_Switch_EPHY_SL; - break; - case INCA_SWITCH_PHY_SPEED_100F: - /* 100Base-TX Full-duplex */ - regEphy = INCA_IP_Switch_EPHY_SL | INCA_IP_Switch_EPHY_DL; - break; - } - - /* In case of Auto-negotiation, - * update the negotiated PAUSE support status - */ - if (phyReg1 & (1 << 3)) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (6 << 16)); /* MII_EXPANSION */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg6); - } while (phyReg6 & (1 << 31)); - - /* We are Autoneg-able. - * Is Link partner also able to autoneg? - */ - if (phyReg6 & (1 << 0)) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (4 << 16)); /* MII_ADVERTISE */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg4); - } while (phyReg4 & (1 << 31)); - - /* We advertise PAUSE capab. - * Does link partner also advertise it? - */ - if (phyReg4 & (1 << 10)) { - SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, - (0x1 << 31) | /* RA */ - (0x0 << 30) | /* Read */ - (0x6 << 21) | /* LAN */ - (5 << 16)); /* MII_LPA */ - do { - SW_READ_REG(INCA_IP_Switch_MDIO_ACC, phyReg5); - } while (phyReg5 & (1 << 31)); - - /* Link partner is PAUSE capab. - */ - if (phyReg5 & (1 << 10)) { - regEphy |= INCA_IP_Switch_EPHY_PL; - } - } - } - - } - - /* Link is up */ - regEphy |= INCA_IP_Switch_EPHY_LL; - - SW_WRITE_REG(INCA_IP_Switch_EPHY, regEphy); - } - } - - return 0; - -Fail: - printf("No Link on LAN port\n"); - return -1; -} -#endif /* CONFIG_INCA_IP_SWITCH_AMDIX */ diff --git a/include/common.h b/include/common.h index baf361b3e5..5fb0bb2d3d 100644 --- a/include/common.h +++ b/include/common.h @@ -681,9 +681,6 @@ ulong get_UCLK (void); #if defined(CONFIG_LH7A40X) ulong get_PLLCLK (void); #endif -#if defined CONFIG_INCA_IP -uint incaip_get_cpuclk (void); -#endif #if defined(CONFIG_IMX) ulong get_systemPLLCLK(void); ulong get_FCLK(void); diff --git a/include/configs/incaip.h b/include/configs/incaip.h deleted file mode 100644 index e11d1843b9..0000000000 --- a/include/configs/incaip.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This file contains the configuration parameters for the INCA-IP board. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_INCA_IP 1 /* on a INCA-IP Board */ - -#define CONFIG_XWAY_SWAP_BYTES - -/* - * Clock for the MIPS core (MHz) - * allowed values: 100000000, 133000000, and 150000000 (default) - */ -#ifndef CONFIG_CPU_CLOCK_RATE -#define CONFIG_CPU_CLOCK_RATE 150000000 -#endif - -#define CONFIG_SYS_XWAY_EBU_BOOTCFG 0x40C4 /* CMULT = 8 */ - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off\0" \ - "addmisc=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate} " \ - "ethaddr=${ethaddr} " \ - "panic=1\0" \ - "flash_nfs=run nfsargs addip addmisc;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 80500000 ${bootfile};" \ - "run nfsargs addip addmisc;bootm\0" \ - "rootpath=/opt/eldk/mips_4KC\0" \ - "bootfile=/tftpboot/INCA/uImage\0" \ - "kernel_addr=B0040000\0" \ - "ramdisk_addr=B0100000\0" \ - "u-boot=/tftpboot/INCA/u-boot.bin\0" \ - "load=tftp 80500000 ${u-boot}\0" \ - "update=protect off 1:0-2;era 1:0-2;" \ - "cp.b 80500000 B0000000 ${filesize}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_self" - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ELF -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_SNTP - - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "INCA-IP # " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ - -#define CONFIG_SYS_MALLOC_LEN 128*1024 - -#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 - -#define CONFIG_SYS_MIPS_TIMER_FREQ (incaip_get_cpuclk() / 2) - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 - -#define CONFIG_SYS_LOAD_ADDR 0x80100000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START 0x80100000 -#define CONFIG_SYS_MEMTEST_END 0x80800000 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ - -#define PHYS_FLASH_1 0xb0000000 /* Flash Bank #1 */ -#define PHYS_FLASH_2 0xb0800000 /* Flash Bank #2 */ - -/* The following #defines are needed to get flash environment right */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) - -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -/* timeout values are in ticks */ -#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -/* Address and size of Primary Environment Sector */ -#define CONFIG_ENV_ADDR 0xB0030000 -#define CONFIG_ENV_SIZE 0x10000 - -#define CONFIG_FLASH_16BIT - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_INCA_IP_SWITCH -#define CONFIG_INCA_IP_SWITCH_AMDIX - -/* - * JFFS2 partitions - */ -/* No command line, one static partition, use all space on the device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor1" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "nor0=INCA-IP Bank 0" -#define MTDPARTS_DEFAULT "mtdparts=INCA-IP Bank 0:192k(uboot)," \ - "64k(env)," \ - "768k(linux)," \ - "1m@3m(rootfs)," \ - "768k(linux2)," \ - "3m@5m(rootfs2)" -*/ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_DCACHE_SIZE 4096 -#define CONFIG_SYS_ICACHE_SIZE 4096 -#define CONFIG_SYS_CACHELINE_SIZE 16 - -#endif /* __CONFIG_H */ diff --git a/include/netdev.h b/include/netdev.h index 32b5073ef0..e211f1841f 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -54,7 +54,6 @@ int ftmac100_initialize(bd_t *bits); int ftmac110_initialize(bd_t *bits); int greth_initialize(bd_t *bis); void gt6426x_eth_initialize(bd_t *bis); -int inca_switch_initialize(bd_t *bis); int ks8695_eth_initialize(void); int ks8851_mll_initialize(u8 dev_num, int base_addr); int lan91c96_initialize(u8 dev_num, int base_addr); -- cgit v1.2.3