From 72a8cf8dccf6f8b86d1683205e032a94eaa86938 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 17 Jan 2016 20:53:51 -0700 Subject: Move all command code into its own directory There are a lot of unrelated files in common, including all of the commands. Moving them into their own directory makes them easier to find and is more logical. Some commands include non-command code, such as cmd_scsi.c. This should be sorted out at some point so that the function can be enabled with or without the associated command. Unfortunately, with m68k I get this error: m68k: + M5329AFEE +arch/m68k/cpu/mcf532x/start.o: In function `_start': +arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o I hope someone can shed some light on what this means. I hope it isn't depending on the position of code in the image. Signed-off-by: Simon Glass Reviewed-by: Bin Meng Reviewed-by: Heiko Schocher Acked-by: Stefan Roese Acked-by: Przemyslaw Marczak --- cmd/cmd_softswitch.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 cmd/cmd_softswitch.c (limited to 'cmd/cmd_softswitch.c') diff --git a/cmd/cmd_softswitch.c b/cmd/cmd_softswitch.c new file mode 100644 index 0000000000..f75d926770 --- /dev/null +++ b/cmd/cmd_softswitch.c @@ -0,0 +1,41 @@ +/* + * cmd_softswitch.c - set the softswitch for bf60x + * + * Copyright (c) 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include + +int do_softswitch(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int switchaddr, value, pin, port; + + if (argc != 5) + return CMD_RET_USAGE; + + if (strcmp(argv[2], "GPA") == 0) + port = IO_PORT_A; + else if (strcmp(argv[2], "GPB") == 0) + port = IO_PORT_B; + else + return CMD_RET_USAGE; + + switchaddr = simple_strtoul(argv[1], NULL, 16); + pin = simple_strtoul(argv[3], NULL, 16); + value = simple_strtoul(argv[4], NULL, 16); + + config_switch_bit(switchaddr, port, (1 << pin), IO_PORT_OUTPUT, value); + + return 0; +} + +U_BOOT_CMD( + softswitch_output, 5, 1, do_softswitch, + "switchaddr GPA/GPB pin_offset value", + "" +); -- cgit v1.2.3