aboutsummaryrefslogtreecommitdiff
path: root/drivers/ddr
Commit message (Collapse)AuthorAgeFilesLines
...
* arm: mvebu: axp: Remove unreferenced ddr3_get_eprom_fabric() functionStefan Roese2021-12-193-26/+0
| | | | | | This function is not referenced in mainline U-Boot. Let's remove now. Signed-off-by: Stefan Roese <sr@denx.de>
* Convert CONFIG_SYS_BR0_PRELIM et al to KconfigTom Rini2021-12-011-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_BR0_PRELIM CONFIG_SYS_OR1_PRELIM CONFIG_SYS_BR1_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR2_PRELIM CONFIG_SYS_OR2_PRELIM CONFIG_SYS_BR3_PRELIM CONFIG_SYS_OR3_PRELIM CONFIG_SYS_BR4_PRELIM CONFIG_SYS_OR4_PRELIM CONFIG_SYS_BR5_PRELIM CONFIG_SYS_OR5_PRELIM CONFIG_SYS_BR6_PRELIM CONFIG_SYS_OR6_PRELIM CONFIG_SYS_BR7_PRELIM CONFIG_SYS_OR7_PRELIM This also introduces CONFIG_SYS_BR0_PRELIM_BOOL as not all platforms that can set these values do so. Add the relevant SYS_BRx_PRELIM_BOOL to platforms that had not been previously migrated. Signed-off-by: Tom Rini <trini@konsulko.com>
* drivers: ddr: lc_common_dimm_params.c : Fix Divison by zero issueManinder Singh2021-11-091-2/+8
| | | | | | | | | Adds check for memory clock variable before calculating caslat_actual. Set mclk_ps to slowest DIMM supported if mclk_ps is found zero. Signed-off-by: Maninder Singh <maninder.singh_1@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* drivers: ddr: main.c: Fix Bad Shift operator issuePriyanka Singh2021-11-091-3/+8
| | | | | | | | Fix Bad Shift operator issue in step_to_string function by adding an if check Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* drivers: ddr: fsl_ddr_gen4.c: Fix divide by zero issuePriyanka Singh2021-11-091-3/+11
| | | | | | | | Fix possible divide by zero issue in fsl_ddr_set_memctl_regs by adding an if check Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* drivers: ddr: util.c: Fix divide by zero issuePriyanka Singh2021-11-091-4/+8
| | | | | | | | Fix possible divide by zero issue in get_memory_clk_period_ps by adding a check Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* WS cleanup: remove SPACE(s) followed by TABWolfgang Denk2021-09-302-10/+10
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* WS cleanup: remove trailing empty linesWolfgang Denk2021-09-302-2/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge tag 'v2021.10-rc5' into nextTom Rini2021-09-271-4/+4
|\ | | | | | | Prepare v2021.10-rc5
| * ddr: altera: use KBUILD_BASENAME instead of __FILE__Marek Vasut2021-09-221-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | The KBUILD_BASENAME contains just the name of the compiled module, in this case 'sequencer', rather than a full path to the compiled file. Use it to prevent pulling the full path into the U-Boot binary, which is useless and annoying. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Siew Chin Lim <elly.siew.chin.lim@intel.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
* | nxp: Migrate a number of DDR related symbols to KconfigTom Rini2021-08-311-0/+21
| | | | | | | | | | | | | | | | | | | | - Guard most of the options in drivers/ddr/fsl/Kconfig with SYS_FSL_DDR || SYS_FSL_MMDC. - Migrate FSL_DMA, DDR_ECC, DDR_ECC_CMD, and ECC_INIT_VIA_DDRCONTROLLER to Kconfig. - Clean up the logic for including the DDR_ECC_CMD code. Signed-off-by: Tom Rini <trini@konsulko.com>
* | nxp: Migrate CONFIG_DDR_CLK_FREQ to KconfigTom Rini2021-08-311-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | As this symbol can either be a fixed value or the function get_board_ddr_clk, migration is tricky. Introduce a choice of DYNAMIC or STATIC_DDR_CLK_FREQ. If DYNAMIC, we continue to use the board defined get_board_ddr_clk function. If STATIC, set CONFIG_DDR_CLK_FREQ to that value and now include/clock_legacy.h contains the function prototype or defines get_board_ddr_clk() to that static value. Update callers to test for DYNAMIC or STATIC. Signed-off-by: Tom Rini <trini@konsulko.com>
* | ddr: Migrate DDR_SPD to KconfigTom Rini2021-08-312-0/+10
| | | | | | | | | | | | | | | | | | Move the symbol that controls building some JEDEC SPD support functions to Kconfig. This is required on the TI keystone 2 platforms and very frequently (but not always) used on large number of Freescale/NXP platforms, so use imply there. Signed-off-by: Tom Rini <trini@konsulko.com>
* | mvebe: Migrate CONFIG_DDR_LOG_LEVEL to KconfigTom Rini2021-08-311-4/+0
| | | | | | | | | | | | Move this specific option to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
* | mvebu: ddr: Rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZETom Rini2021-08-311-2/+2
|/ | | | | | | | | | | | We have a number of CONFIG symbols to express the fixed size of system memory. For now, rename CONFIG_DDR_FIXED_SIZE to CONFIG_SYS_SDRAM_SIZE and adjust usage to match that CONFIG_SYS_SDRAM_SIZE expects the entire size rather than MiB. Cc: Marek Behún <marek.behun@nic.cz> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Marek Behún <marek.behun@nic.cz>
* ddr: altera: Add SDRAM driver for Intel N5X deviceTien Fong Chee2021-08-254-1/+2371
| | | | | | | | | | | | | | | | | | | | | The DDR subsystem in Diamond Mesa is consisted of controller, PHY, memory reset manager and memory clock manager. Configuration settings of controller, PHY and memory reset manager is come from DDR handoff data in bitstream, which contain the register base addresses and user settings from tool. Configuration settings of memory clock manager is come from the HPS handoff data in bitstream, however the register base address is defined in device tree. The calibration is fully done in HPS, which requires IMEM and DMEM binaries loading to PHY SRAM for running this calibration, both IMEM and DMEM binaries are also part of bitstream, this bitstream would be loaded to OCRAM by SDM, and configured by DDR driver. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com> Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
* ddr: socfpga: Enable memory test on memory size less than 1GBTien Fong Chee2021-08-251-3/+21
| | | | | | | | Minimum 1GB memory size is required in current memory test, so this patch improves the memory test for processing memory size less than 1GB, and the size in power of two. Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
* ddr: Add DDR driver for iMX8ULPYe Li2021-08-094-0/+238
| | | | | | | | | | Add iMX8ULP DDR initialization driver which loads the DDR timing parameters and executes the training procedure. When enabling IMX8ULP_DRAM_PHY_PLL_BYPASS, using PHY PLL bypass mode to do DDR init Signed-off-by: Ye Li <ye.li@nxp.com>
* ppc: Remove T4160RDB boardTom Rini2021-07-071-2/+1
| | | | | | | | This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the last ARCH_T4160 platform, remove that support as well. Signed-off-by: Tom Rini <trini@konsulko.com>
* ppc: Remove sbc8641d boardTom Rini2021-07-073-95/+2
| | | | | | | | | | | This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. This is also the last of the ARCH_MPC8641/MPC8610 platforms, so remove that support as well. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* ppc: Remove xpedite boardsTom Rini2021-07-071-1/+0
| | | | | | | | | | These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this includes the last ARCH_MPC8572 platform, remove that as well. Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peter Tyser <ptyser@xes-inc.com>
* ppc: Remove MPC8555CDS boardsTom Rini2021-07-072-19/+4
| | | | | | | | | These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. As this is the only ARCH_MPC8555 platform left, remove that support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ppc: Remove MPC8541CDS boardTom Rini2021-07-072-2/+2
| | | | | | | | | This board has not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove it. As this is the only MPC8541 target left, remove that architecture support as well. Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: mvebu: a38x: Correct mismatched bound warningsTom Rini2021-07-071-3/+7
| | | | | | | | | | | | | | | | With gcc-11 we see: drivers/ddr/marvell/a38x/ddr3_debug.c:672:47: error: argument 2 of type 'u32[5]' {aka 'unsigned int[5]'} with mismatched bound [-Werror=array-parameter=] 672 | int ddr3_tip_read_adll_value(u32 dev_num, u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], | ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h:10, from drivers/ddr/marvell/a38x/ddr3_init.h:17, from drivers/ddr/marvell/a38x/ddr3_debug.c:6: drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h:116:47: note: previously declared as 'u32[]' {aka 'unsigned int[]'} And similar warnings. Correct these by updating the prototype. Remove the prototype for ddr3_tip_read_pup_value as it is unused. Signed-off-by: Tom Rini <trini@konsulko.com>
* ppc: Remove Cyrus_P5020 and P5040 boardsTom Rini2021-04-101-1/+0
| | | | | | | | | | | These boards have not been converted to CONFIG_DM_MMC by the deadline. Remove them. As the P5020 is the last ARCH_P5020 platform, remove that support as well. Cc: Andy Fleming <afleming@gmail.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* imx8mp: refine power on imx8mp boardhaidong.zheng2021-04-081-0/+8
| | | | | | | | VDD SOC normal run changed to 0.85V LPDDR4 freq0 change from 4000MTS to 2400MTS Signed-off-by: haidong.zheng <haidong.zheng@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* arm: mvebu: a38x: Remove dead code ARMADA_39XPali Rohár2021-03-123-17/+0
| | | | | | | | | | | Config option ARMADA_39X is never set so remove all dead code hidden under ifdef CONFIG_ARMADA_39X blocks. Also remove useless checks for CONFIG_ARMADA_38X define as this macro is always defined for a38x code path. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
* ddr: marvell: axp: fix array types have different bounds warningMarek Behún2021-03-122-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The arrays `pbs_dq_mapping`, `div_ratio1to1` and `div_ratio2to1` have different bounds declared in header files where these variables are also defined from the ones declared in source files. This causes the compiler to complain (when building with LTO): ddr3_sdram.c:24:12: warning: type of ‘pbs_dq_mapping’ does not match original declaration [-Wlto-type-mismatch] ddr3_patterns_64bit.h:911:5: note: array types have different bounds ddr3_patterns_64bit.h:911:5: note: ‘pbs_dq_mapping’ was previously declared here ddr3_dfs.c:45:11: warning: type of ‘div_ratio1to1’ does not match original declaration [-Wlto-type-mismatch] ddr3_axp_vars.h:167:4: note: array types have different bounds ddr3_axp_vars.h:167:4: note: ‘div_ratio1to1’ was previously declared here ddr3_dfs.c:46:11: warning: type of ‘div_ratio2to1’ does not match original declaration [-Wlto-type-mismatch] ddr3_axp_vars.h:196:4: note: array types have different bounds ddr3_axp_vars.h:196:4: note: ‘div_ratio2to1’ was previously declared here CI managed to trigger this as an error when compiling with LTO for AXP. Fix this by using values from the header files, which seem to be the correct ones. Signed-off-by: Marek Behún <marek.behun@nic.cz>
* ddr: marvell: axp: align signature of mv_xor_mem_init() with a38xMarek Behún2021-03-122-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In arch/arm/mach-mvebu/dram.c we always include axp's xor.h for common XOR definitions, regardless whether we compile for axp or a38x. But the declaration of this function has a different signature in axp's xor.h from the one used in a38x' implementation - one parameter is u64 instead of u32. This can result in wrong argument's being passed to that function on a38x with no one the wiser. I discovered this when building U-Boot for Turris Omnia with LTO. The compiler complains about the different signatures being thrown into the same linking process: axp/xor.h:67:5: warning: type of ‘mv_xor_mem_init’ does not match original declaration [-Wlto-type-mismatch] 67 | int mv_xor_mem_init(u32 chan, u32 start_ptr, u32 block_size, | ^ a38x/xor.c:165:5: note: type mismatch in parameter 3 165 | int mv_xor_mem_init(u32 chan, u32 start_ptr, unsigned long long | ^ a38x/xor.c:165:5: note: type ‘long long unsigned int’ should match type ‘u32’ Fix this by changing the type of the block_size argument in the axp's implementation and header file to the one used in a38x (and upstream mv-ddr-marvell). Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
* ddr: marvell: a38x: Sync code with Marvell mv-ddr-marvell repositoryPali Rohár2021-03-1210-40/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This syncs drivers/ddr/marvell/a38x/ with the master branch of repository https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git up to the commit 7c351731d196 ("Merge pull request #29 from pali/sync-a38x-uboot"). This patch was created by following steps: 1. Replace all a38x files in U-Boot tree by files from upstream github Marvell mv-ddr-marvell repository. 2. Run following command to omit portions not relevant for a38x and ddr3: files=drivers/ddr/marvell/a38x/* sed 's/#if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X)/#ifdef TRUE/' -i $files unifdef -m -UMV_DDR -UMV_DDR_ATF -UCONFIG_DDR4 -UCONFIG_APN806 \ -UCONFIG_MC_STATIC -UCONFIG_MC_STATIC_PRINT -UCONFIG_PHY_STATIC \ -UCONFIG_PHY_STATIC_PRINT -UCONFIG_CUSTOMER_BOARD_SUPPORT \ -UCONFIG_A3700 -UA3900 -UA80X0 -UA70X0 -DTRUE $files 3. Manually omit SPDX-License-Identifier changes from this patch as upstream license in upstream github repository contains long license texts and U-Boot is using just SPDX-License-Identifier. After applying this patch, a38x ddr3 code in upstream Marvell github repository and in U-Boot would be fully identical. So in future applying above steps could be used to sync code again. The only change in this patch is removal of dead code and some fixes with include files. Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
* ddr: marvell: a38x: Add more space for additional info from SPDSujeet Baranwal2021-03-121-1/+7
| | | | | | | | | | | | | | | commit 258be123226f8f5cd516b7813fe201fb7d7416e9 upstream. At this moment, only page 0 of SPD is being read but to support smbios, we need to read page 1 also which has more info. In order to do that, we need to allocate more space. Signed-off-by: Sujeet Baranwal <sujeet.baranwal@cavium.com> Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com> Reviewed-by: Sujeet Kumar Baranwal <Sujeet.Baranwal@cavium.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <judge.packham@gmail.com>
* arm: socfpga: Move Stratix10 and Agilex to use TARGET_SOCFPGA_SOC64Siew Chin Lim2021-03-081-3/+3
| | | | | | Create common macro TARGET_SOCFPGA_SOC64 for Stratix10 and Agilex. Signed-off-by: Siew Chin Lim <elly.siew.chin.lim@intel.com>
* ddr: marvell: a38x: fix comment in conditional macroMarek Behún2021-02-261-1/+1
| | | | | | | | | | The code was processed with unifdef utility to omit portions not relevant to A38x and DDR3. This removes usage of many macros, including A70X0, A80X0 and A3900. It seems that the unifdef utility did not remove the macros from #else comment. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: bump version to 14.0.0Marek Behún2021-02-261-1/+1
| | | | | | | | | | | | Bump version of a38x DDR3 trianing to version 14.0.0 to reflect the version in the mv-ddr-devel branch of upstream repository https://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git. There is a new version numbering system, where after 18.12.0 came 1.0.0, 2.0.0, and so on until 14.0.0. So 14.0.0 is newer than 18.12.0. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: enum mv_ddr_twin_die: change orderheaterC2021-02-261-1/+1
| | | | | | | | | | | | | | | | | | | commit 56db5d1464b44df10a02b99e615ebd6f6a35c428 upstream. @pali suggested this change In commit 6285efb ("mv_ddr: add support for twin-die combined memory device") was added support for twin-die combined memory device and default value for explicitly uninitialized structure members is zero, s also twin_die_combined is initialized to zero. Which means COMBINED value. As prior this commit there was no support for twin-die combined memory device, default value for twin_die_combined should be NOT_COMBINED. This change change order of enum mv_ddr_twin_die to ensure that NOT_COMBINED has value zero. Signed-off-by: heaterC <airyguy@gmx.de> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: import code change from upstreamMarek Behún2021-02-261-0/+3
| | | | | | | | | | | | commit 2bdd12dd68b1f8e27a03a3443ae49a09a14c18e4 upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes code in ddr3_training.c. Import this change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: fix memory cs size functionMoti Buskila2021-02-262-5/+10
| | | | | | | | | | | | | | | commit c8b301463d508c807a33f7b7eaea98bbda4aa35e upstream. The funtion returnd cs size in byte instead of MB, that cause calculation error since the caller was expected to get u32 and when he got above 4G it refers it as 0. The fix was to get the cs memory size from function as in MB and then multiply it by 1MB. Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: import header change from upstreamMarek Behún2021-02-261-3/+0
| | | | | | | | | | | | commit d653b305d0b3da9727c49124683f1a6d95d5c9a5 upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes header ddr_topology_def.h. Import this header change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: disable WL phase correction stage in case of bus_width=16bitMoti Buskila2021-02-261-0/+3
| | | | | | | | | | | | | commit 20c89a28548cdab11f88d2ec8936344af0686a1e upstream. WL phase correcion stage is failing while using bus_width of 16bit, not to be fix this stage is un-necessary when working with bus_width of 16 bit. Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: add support for twin-die combined memory deviceMoti Buskila2021-02-262-1/+17
| | | | | | | | | | | | | | commit 6285efb8a118940877522c4c07bd7c64569b4f5f upstream. the twin-die combined memory device should be treatened as X8 device and not as X16 one Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> [ - the default value for twin_die_combined is set to NOT_COMBINED for all boards, as this was default behaviour prior this change ] Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: add 16Gbit memory devices supportMoti Buskila2021-02-262-1/+4
| | | | | | | | | commit 994509eb4fe6771d92cd06314c37895098ac48fa upstream. Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: allow board specific ODT configurationBaruch Siach2021-02-262-0/+8
| | | | | | | | | | | | | | | | commit 2d3b9437cf38c06c4330e0de07f29476197f5e04 upstream. The ODT enable heuristic based on active chip-selects is not always correct. Some board might use two chip-selects, but have only one ODT line connected. Allow board specific mv_ddr_topology_map to directly set the ODT configuration register value. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Moti Buskila <motib@marvell.com> Reviewed-by: Nadav Haklai <Nadav.Haklai@cavium.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: import header change from upstreamMarek Behún2021-02-261-0/+8
| | | | | | | | | | | | commit 3908e20c6c520339e9bddb566823ae5e065d5218 upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes header ddr_topology_def.h. Import this header change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: fix memory size calculation using 32bit bus widthMoti Buskila2021-02-263-10/+0
| | | | | | | | | | | | | | | | | | commit ab9240402a70cc02496683971779e75eff410ab4 upstream. - function mv_ddr_spd_die_capacity_user_get() has a bug, since it insert a user memory enum to it, instead of SPD memory enum (which are different) - fix: remove mv_ddr_spd_die_capacity_user_get() function. - memory size with 64 and 32 bit already calculated correctly at mv_ddr_mem_sz_per_cs_get() function Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Stefan Chulski <Stefan.Chulski@cavium.com> Reviewed-by: Alex Leibovich <alexl@marvell.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: fix 32bitMoti Buskila2021-02-261-1/+1
| | | | | | | | | | commit 0b5adedd4ced9b8f528faad1957d4d69e95759ef upstream. Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Alex Leibovich <alexl@marvell.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: import header change from upstreamMarek Behún2021-02-261-0/+2
| | | | | | | | | | | | commit 6c705ebc0d70f67ed7cae83ad1978c3305ef25be upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes header mv_ddr_topology.h. Import this header change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: add ddr 32bit ECC supportAlex Leibovich2021-02-263-1/+11
| | | | | | | | | | | | | commit 61a8910998d7b553e80f600ebe8147a8b98f0945 upstream. Required changes made for 32bit ddr support. An update is made to the topology map, according to bus_act_mask, set in the dram_port.c Signed-off-by: Alex Leibovich <alexl@marvell.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: add ddr32 supportAlex Leibovich2021-02-261-1/+4
| | | | | | | | | | | | | | commit 32800667b375ebd1f82120da0f3479b1cf52d96d upstream. Required changes made for 32bit ddr support. An update is made to the topology map, according to bus_act_mask, set in the dram_port.c Signed-off-by: Alex Leibovich <alexl@marvell.com> Reviewed-by: Nadav Haklai <Nadav.Haklai@cavium.com> Reviewed-by: Kostya Porotchkin <Kostya.Porotchkin@cavium.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: import header change from upstreamMarek Behún2021-02-261-1/+2
| | | | | | | | | | | | commit a165037ec26f301be75e1fabc263643683e85255 upstream. The commit mentioned above changes non-DDR3 stuff in upstream, but it also changes header ddr_topology_def.h. Import this header change to remain consistent with upstream. Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
* ddr: marvell: a38x: fix write leveling suplementary algoMoti Buskila2021-02-261-1/+4
| | | | | | | | | | | | | | commit ce62bef8fac559e27245259882e45f19cdc293ad upstream. - fix JIRA A7K8K-5056 - remove TEST_PATTERN write at the load patern stage earlier to WL SUP stage - the WL SUP stage already writes this pattern to the memory, if the pattern exist at the memory then the algorithm will fail, since it think that there are no phase to correct Signed-off-by: Moti Buskila <motib@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Signed-off-by: Marek Behún <marek.behun@nic.cz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-14 07:23:43 +0000