diff options
Diffstat (limited to 'test')
| -rwxr-xr-x | test/nokia_rx51_test.sh | 420 |
1 files changed, 0 insertions, 420 deletions
diff --git a/test/nokia_rx51_test.sh b/test/nokia_rx51_test.sh deleted file mode 100755 index dca9ef3027..0000000000 --- a/test/nokia_rx51_test.sh +++ /dev/null @@ -1,420 +0,0 @@ -#!/bin/bash -e -# SPDX-License-Identifier: GPL-2.0+ -# (C) 2020 Pali Rohár <pali@kernel.org> - -# External tools needed for this test: -echo ' - wget - git - truncate - tar - dpkg - dd - make - gcc - arm-linux-gnueabi-gcc - fakeroot (homepage http://fakeroot-ng.lingnu.com/) - mcopy (from mtools, homepage http://www.gnu.org/software/mtools/) - mformat (from mtools, homepage http://www.gnu.org/software/mtools/) - /usr/sbin/mkfs.ubifs (from mtd-utils, homepage http://www.linux-mtd.infradead.org/) - /usr/sbin/ubinize (from mtd-utils, homepage http://www.linux-mtd.infradead.org/) - /lib/ld-linux.so.2 (32-bit x86 version of LD loader, needed for qflasher) -' | while read tool info; do - if test -z "$tool"; then continue; fi - if ! which $tool 1>/dev/null 2>&1; then - echo "Tool $tool was not found and is required to run this test" - echo "First install $tool $info" - exit 1 - fi -done || exit 1 - -echo -echo "============================================================" -echo "========== Compiling U-Boot for Nokia RX-51 board ==========" -echo "============================================================" -echo - -# First compile u-boot-ubifs.bin binary with UBI/UBIFS support for Nokia RX-51 board according to doc/board/nokia/rx51.rst -make nokia_rx51_config -cat >> .config << EOF -CONFIG_CMD_UBI=y -CONFIG_CMD_UBIFS=y -CONFIG_MTD_UBI_BEB_LIMIT=10 -EOF -make olddefconfig -make -j4 u-boot.bin CROSS_COMPILE=arm-linux-gnueabi- -mv u-boot.bin u-boot-ubifs.bin - -# Then compile standard u-boot.bin binary for Nokia RX-51 board -make nokia_rx51_config -make -j4 u-boot.bin CROSS_COMPILE=arm-linux-gnueabi- - -# And then do all stuff in temporary directory -mkdir -p nokia_rx51_tmp -cd nokia_rx51_tmp - -test -f mkimage || ln -s ../tools/mkimage . -test -f u-boot.bin || ln -s ../u-boot.bin . -test -f u-boot-ubifs.bin || ln -s ../u-boot-ubifs.bin . - -echo -echo "==========================================================================" -echo "========== Downloading and compiling qemu from qemu-linaro fork ==========" -echo "==========================================================================" -echo - -# Download and compile linaro version qemu which has support for n900 machine -# Last working commit is 8f8d8e0796efe1a6f34cdd83fb798f3c41217ec1 -if ! test -f qemu-system-arm; then - test -d qemu-linaro || git clone https://git.linaro.org/qemu/qemu-linaro.git - cd qemu-linaro - git checkout 8f8d8e0796efe1a6f34cdd83fb798f3c41217ec1 - ./configure --enable-system --target-list=arm-softmmu --python=/usr/bin/python2.7 --disable-sdl --disable-gtk --disable-curses --audio-drv-list= --audio-card-list= --disable-werror --disable-xen --disable-xen-pci-passthrough --disable-brlapi --disable-vnc --disable-curl --disable-slirp --disable-kvm --disable-user --disable-linux-user --disable-bsd-user --disable-guest-base --disable-uuid --disable-vde --disable-linux-aio --disable-cap-ng --disable-attr --disable-blobs --disable-docs --disable-spice --disable-libiscsi --disable-smartcard-nss --disable-usb-redir --disable-guest-agent --disable-seccomp --disable-glusterfs --disable-nptl --disable-fdt - make -j4 - cd .. - ln -s qemu-linaro/arm-softmmu/qemu-system-arm . -fi - -echo -echo "===================================================" -echo "========== Downloading external binaries ==========" -echo "===================================================" -echo - -# Download qflasher and nolo images -# This is proprietary qemu flasher tool with first stage images, but license allows non-commercial redistribution -if ! test -f qflasher || ! test -f xloader-qemu.bin || ! test -f secondary-qemu.bin; then - test -f qemu-n900.tar.gz || wget -c http://repository.maemo.org/qemu-n900/qemu-n900.tar.gz - tar -xf qemu-n900.tar.gz -fi - -# Download Maemo script u-boot-gen-combined -if ! test -f u-boot-gen-combined; then - test -d u-boot-maemo || git clone https://github.com/pali/u-boot-maemo.git - chmod +x u-boot-maemo/debian/u-boot-gen-combined - ln -s u-boot-maemo/debian/u-boot-gen-combined . -fi - -# Download Maemo fiasco kernel -if ! test -d kernel_2.6.28; then - test -f kernel_2.6.28-20103103+0m5_armel.deb || wget -c http://repository.maemo.org/pool/maemo5.0/free/k/kernel/kernel_2.6.28-20103103+0m5_armel.deb - dpkg -x kernel_2.6.28-20103103+0m5_armel.deb kernel_2.6.28 -fi - -# Download Maemo libc -if ! test -d libc6_2.5.1; then - test -f libc6_2.5.1-1eglibc27+0m5_armel.deb || wget -c http://repository.maemo.org/pool/maemo5.0/free/g/glibc/libc6_2.5.1-1eglibc27+0m5_armel.deb - dpkg -x libc6_2.5.1-1eglibc27+0m5_armel.deb libc6_2.5.1 -fi - -# Download Maemo busybox -if ! test -d busybox_1.10.2; then - test -f busybox_1.10.2.legal-1osso30+0m5_armel.deb || wget -c http://repository.maemo.org/pool/maemo5.0/free/b/busybox/busybox_1.10.2.legal-1osso30+0m5_armel.deb - dpkg -x busybox_1.10.2.legal-1osso30+0m5_armel.deb busybox_1.10.2 -fi - -echo -echo "=======================================" -echo "========== Generating images ==========" -echo "=======================================" -echo - -# Generate kernel image in zImage and uImage format from FIASCO format -dd if=kernel_2.6.28/boot/zImage-2.6.28-20103103+0m5.fiasco of=zImage-2.6.28-omap1 skip=95 bs=1 -./mkimage -A arm -O linux -T kernel -C none -a 80008000 -e 80008000 -n zImage-2.6.28-omap1 -d zImage-2.6.28-omap1 uImage-2.6.28-omap1 - -# Generate rootfs directory -mkdir -p rootfs -mkdir -p rootfs/dev/ -mkdir -p rootfs/bin/ -mkdir -p rootfs/sbin/ -mkdir -p rootfs/lib/ -cp -a busybox_1.10.2/bin/busybox rootfs/bin/ -cp -a libc6_2.5.1/lib/ld-linux.so.3 rootfs/lib/ -cp -a libc6_2.5.1/lib/ld-2.5.so rootfs/lib/ -cp -a libc6_2.5.1/lib/libc.so.6 rootfs/lib/ -cp -a libc6_2.5.1/lib/libc-2.5.so rootfs/lib/ -cp -a libc6_2.5.1/lib/libcrypt.so.1 rootfs/lib/ -cp -a libc6_2.5.1/lib/libcrypt-2.5.so rootfs/lib/ -test -f rootfs/bin/sh || ln -sf busybox rootfs/bin/sh -test -f rootfs/sbin/poweroff || ln -sf ../bin/busybox rootfs/sbin/poweroff -cat > rootfs/sbin/preinit << EOF -#!/bin/sh -echo -echo "Successfully booted" -echo -/sbin/poweroff -f -EOF -chmod +x rootfs/sbin/preinit - -# Generate ubifs image from rootfs directory -# NOTE: Character device on host filesystem can be created only by root -# But we do not need it on host filesystem, just in ubifs image -# So run mknod and mkfs.ubifs commands under fakeroot program -# which via LD_PRELOAD simulate mknod() and stat() functions -# so mkfs.ubifs will see dev/console as character device and -# put it correctly as character device into final ubifs image -# Therefore we can run whole script as non-root nobody user -fakeroot sh -c ' - rm -f rootfs/dev/console; - mknod rootfs/dev/console c 5 1; - /usr/sbin/mkfs.ubifs -m 2048 -e 129024 -c 2047 -r rootfs ubifs.img; -' - -# Generate ubi image with rootfs on first volume -cat > ubi.ini << EOF -[rootfs] -mode=ubi -image=ubifs.img -vol_id=0 -vol_size=230MiB # 1870 LEBs -vol_type=dynamic -vol_name=rootfs -vol_alignment=1 -vol_flags=autoresize -EOF -/usr/sbin/ubinize -o ubi.img -p 128KiB -m 2048 -s 512 ubi.ini - -# Generate ubi image with rootfs on first volume and kernel in zImage format on second volume for UBI booting -cp ubi.ini ubi_with_kernel.ini -cat >> ubi_with_kernel.ini << EOF -[kernel] -mode=ubi -image=zImage-2.6.28-omap1 -vol_id=1 -vol_size=2MiB -vol_type=dynamic -vol_name=kernel -vol_alignment=1 -EOF -/usr/sbin/ubinize -o ubi_with_kernel.img -p 128KiB -m 2048 -s 512 ubi_with_kernel.ini - -# Generate bootmenu for U-Boot serial console testing -cat > bootmenu_uboot << EOF -setenv bootmenu_0 'Serial console test=echo; echo "Testing serial console"; echo; echo "Successfully booted"; echo; poweroff'; -setenv bootmenu_1; -setenv bootmenu_delay 1; -setenv bootdelay 1; -EOF -./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_uboot -d bootmenu_uboot bootmenu_uboot.scr - -# Generate bootmenu for eMMC booting (uImage) -cat > bootmenu_emmc << EOF -setenv bootmenu_0 'uImage-2.6.28-omap1 from eMMC=setenv mmcnum 1; setenv mmcpart 1; setenv mmctype fat; setenv bootargs; setenv setup_omap_atag 1; setenv mmckernfile uImage-2.6.28-omap1; run trymmckernboot'; -setenv bootmenu_1; -setenv bootmenu_delay 1; -setenv bootdelay 1; -EOF -./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_emmc -d bootmenu_emmc bootmenu_emmc.scr - -# Generate bootmenu for eMMC booting (zImage) -cat > bootmenu_emmc2 << EOF -setenv bootmenu_0 'zImage-2.6.28-omap1 from eMMC=setenv mmcnum 1; setenv mmcpart 1; setenv mmctype fat; setenv bootargs; setenv setup_omap_atag 1; setenv mmckernfile zImage-2.6.28-omap1; run trymmckernboot'; -setenv bootmenu_1; -setenv bootmenu_delay 1; -setenv bootdelay 1; -EOF -./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_emmc2 -d bootmenu_emmc2 bootmenu_emmc2.scr - -# Generate bootmenu for OneNAND booting (uImage) -cat > bootmenu_nand << EOF -setenv bootmenu_0 'uImage-2.6.28-omap1 from OneNAND=setenv bootargs; setenv setup_omap_atag 1; mtd read initfs \${kernaddr} && bootm \${kernaddr}'; -setenv bootmenu_1; -setenv bootmenu_delay 1; -setenv bootdelay 1; -EOF -./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_nand -d bootmenu_nand bootmenu_nand.scr - -# Generate bootmenu for UBI booting (zImage) -cat > bootmenu_ubi << EOF -setenv bootmenu_0 'zImage-2.6.28-omap1 from UBI=setenv bootargs; setenv setup_omap_atag 1; ubi part rootfs && ubi read \${kernaddr} kernel && bootz \${kernaddr}'; -setenv bootmenu_1; -setenv bootmenu_delay 1; -setenv bootdelay 1; -EOF -./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_ubi -d bootmenu_ubi bootmenu_ubi.scr - -# Generate bootmenu for default booting -cat > bootmenu_default << EOF -setenv bootmenu_delay 1; -setenv bootdelay 1; -EOF -./mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n bootmenu_default -d bootmenu_default bootmenu_default.scr - -# Generate combined image from u-boot and Maemo fiasco kernel -./u-boot-gen-combined u-boot.bin zImage-2.6.28-omap1 combined_zimage.bin -./u-boot-gen-combined u-boot.bin uImage-2.6.28-omap1 combined_uimage.bin - -# Generate combined hack image from u-boot and Maemo fiasco kernel (kernel starts at 2MB offset and qflasher puts 2kB header before supplied image) -cp u-boot.bin combined_hack.bin -dd if=uImage-2.6.28-omap1 of=combined_hack.bin bs=1024 seek=$((2048-2)) - -# Generate FAT32 eMMC image for U-Boot serial console testing -truncate -s 50MiB emmc_uboot.img -mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_uboot.img -mcopy bootmenu_uboot.scr ::/bootmenu.scr -i emmc_uboot.img - -# Generate FAT32 eMMC image for eMMC booting (uImage) -truncate -s 50MiB emmc_emmc.img -mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_emmc.img -mcopy uImage-2.6.28-omap1 ::/uImage-2.6.28-omap1 -i emmc_emmc.img -mcopy bootmenu_emmc.scr ::/bootmenu.scr -i emmc_emmc.img - -# Generate FAT32 eMMC image for eMMC booting (zImage) -truncate -s 50MiB emmc_emmc2.img -mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_emmc2.img -mcopy zImage-2.6.28-omap1 ::/zImage-2.6.28-omap1 -i emmc_emmc2.img -mcopy bootmenu_emmc2.scr ::/bootmenu.scr -i emmc_emmc2.img - -# Generate FAT32 eMMC image for OneNAND booting (uImage) -truncate -s 50MiB emmc_nand.img -mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_nand.img -mcopy bootmenu_nand.scr ::/bootmenu.scr -i emmc_nand.img - -# Generate FAT32 eMMC image for UBI booting (zImage) -truncate -s 50MiB emmc_ubi.img -mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_ubi.img -mcopy bootmenu_ubi.scr ::/bootmenu.scr -i emmc_ubi.img - -# Generate FAT32 eMMC image for default booting -truncate -s 50MiB emmc_default.img -mformat -m 0xf8 -F -h 4 -s 16 -c 1 -t $((50*1024*1024/(4*16*512))) :: -i emmc_default.img -mcopy bootmenu_default.scr ::/bootmenu.scr -i emmc_default.img - -# Generate MTD image for U-Boot serial console testing -rm -f mtd_uboot.img -./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k u-boot.bin -m rx51 -o mtd_uboot.img - -# Generate MTD image for RAM booting from bootloader nolo images, compiled image and rootfs image -rm -f mtd_ram.img -./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k combined_uimage.bin -r ubi.img -m rx51 -o mtd_ram.img -rm -f mtd_ram2.img -./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k combined_zimage.bin -r ubi.img -m rx51 -o mtd_ram2.img - -# Generate MTD image for eMMC booting from bootloader nolo images, u-boot image and rootfs image -rm -f mtd_emmc.img -./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k u-boot.bin -r ubi.img -m rx51 -o mtd_emmc.img - -# Generate MTD image for OneNAND booting from bootloader nolo images, combined hacked image and rootfs image -# Kernel image is put into initfs area, but qflasher reject to copy kernel image into initfs area because it does not have initfs signature -# This is hack to workaround this problem, tell qflasher that kernel area for u-boot is bigger and put big combined hacked image (u-boot + kernel with correct offset) -rm -f mtd_nand.img -./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k combined_hack.bin -r ubi.img -m rx51 -p k=4094,i=2 -o mtd_nand.img - -# Generate MTD image for UBI booting from bootloader nolo images, u-boot image with UBI/UBIFS support and rootfs image with kernel volume -rm -f mtd_ubi.img -./qflasher -v -x xloader-qemu.bin -s secondary-qemu.bin -k u-boot-ubifs.bin -r ubi_with_kernel.img -m rx51 -o mtd_ubi.img - -echo -echo "======================================================" -echo "========== Running test images in n900 qemu ==========" -echo "======================================================" -echo - -# Run MTD image in qemu and wait for 300s if U-Boot prints testing string to serial console and poweroff -rm -f qemu_uboot.log -./qemu-system-arm -M n900 -mtdblock mtd_uboot.img -sd emmc_uboot.img -serial /dev/stdout -display none > qemu_uboot.log & -qemu_pid=$! -tail -F qemu_uboot.log & -tail_pid=$! -sleep 300 & -sleep_pid=$! -wait -n $sleep_pid $qemu_pid || true -kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true -wait || true - -# Run MTD image in qemu and wait for 300s if uImage kernel from RAM is correctly booted -rm -f qemu_ram.log -./qemu-system-arm -M n900 -mtdblock mtd_ram.img -serial /dev/stdout -display none > qemu_ram.log & -qemu_pid=$! -tail -F qemu_ram.log & -tail_pid=$! -sleep 300 & -sleep_pid=$! -wait -n $sleep_pid $qemu_pid || true -kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true -wait || true - -# Run MTD image in qemu and wait for 300s if zImage kernel from RAM is correctly booted -rm -f qemu_ram2.log -./qemu-system-arm -M n900 -mtdblock mtd_ram2.img -sd emmc_default.img -serial /dev/stdout -display none > qemu_ram2.log & -qemu_pid=$! -tail -F qemu_ram2.log & -tail_pid=$! -sleep 300 & -sleep_pid=$! -wait -n $sleep_pid $qemu_pid || true -kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true -wait || true - -# Run MTD image in qemu and wait for 300s if uImage kernel from eMMC is correctly booted -rm -f qemu_emmc.log -./qemu-system-arm -M n900 -mtdblock mtd_emmc.img -sd emmc_emmc.img -serial /dev/stdout -display none > qemu_emmc.log & -qemu_pid=$! -tail -F qemu_emmc.log & -tail_pid=$! -sleep 300 & -sleep_pid=$! -wait -n $sleep_pid $qemu_pid || true -kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true -wait || true - -# Run MTD image in qemu and wait for 300s if zImage kernel from eMMC is correctly booted -rm -f qemu_emmc2.log -./qemu-system-arm -M n900 -mtdblock mtd_emmc.img -sd emmc_emmc2.img -serial /dev/stdout -display none > qemu_emmc2.log & -qemu_pid=$! -tail -F qemu_emmc2.log & -tail_pid=$! -sleep 300 & -sleep_pid=$! -wait -n $sleep_pid $qemu_pid || true -kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true -wait || true - -# Run MTD image in qemu and wait for 300s if kernel from OneNAND is correctly booted -rm -f qemu_nand.log -./qemu-system-arm -M n900 -mtdblock mtd_nand.img -sd emmc_nand.img -serial /dev/stdout -display none > qemu_nand.log & -qemu_pid=$! -tail -F qemu_nand.log & -tail_pid=$! -sleep 300 & -sleep_pid=$! -wait -n $sleep_pid $qemu_pid || true -kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true -wait || true - -# Run MTD image in qemu and wait for 300s if kernel from UBI is correctly booted -rm -f qemu_ubi.log -./qemu-system-arm -M n900 -mtdblock mtd_ubi.img -sd emmc_ubi.img -serial /dev/stdout -display none > qemu_ubi.log & -qemu_pid=$! -tail -F qemu_ubi.log & -tail_pid=$! -sleep 300 & -sleep_pid=$! -wait -n $sleep_pid $qemu_pid || true -kill -9 $tail_pid $sleep_pid $qemu_pid 2>/dev/null || true -wait || true - -echo -echo "=============================" -echo "========== Results ==========" -echo "=============================" -echo - -if grep -q 'Successfully booted' qemu_uboot.log; then echo "U-Boot serial console is working"; else echo "U-Boot serial console test failed"; fi -if grep -q 'Successfully booted' qemu_ram.log; then echo "Kernel (uImage) was successfully booted from RAM"; else echo "Failed to boot kernel (uImage) from RAM"; fi -if grep -q 'Successfully booted' qemu_ram2.log; then echo "Kernel (zImage) was successfully booted from RAM"; else echo "Failed to boot kernel (zImage) from RAM"; fi -if grep -q 'Successfully booted' qemu_emmc.log; then echo "Kernel (uImage) was successfully booted from eMMC"; else echo "Failed to boot kernel (uImage) from eMMC"; fi -if grep -q 'Successfully booted' qemu_emmc2.log; then echo "Kernel (zImage) was successfully booted from eMMC"; else echo "Failed to boot kernel (zImage) from eMMC"; fi -if grep -q 'Successfully booted' qemu_nand.log; then echo "Kernel (uImage) was successfully booted from OneNAND"; else echo "Failed to boot kernel (uImage) from OneNAND"; fi -if grep -q 'Successfully booted' qemu_ubi.log; then echo "Kernel (zImage) was successfully booted from UBI"; else echo "Failed to boot kernel (zImage) from UBI"; fi - -echo - -if grep -q 'Successfully booted' qemu_uboot.log && grep -q 'Successfully booted' qemu_ram.log && grep -q 'Successfully booted' qemu_ram2.log && grep -q 'Successfully booted' qemu_emmc.log && grep -q 'Successfully booted' qemu_emmc2.log && grep -q 'Successfully booted' qemu_nand.log && grep -q 'Successfully booted' qemu_ubi.log; then - echo "All tests passed" - exit 0 -else - echo "Some tests failed" - exit 1 -fi |