diff options
Diffstat (limited to 'include/dt-bindings')
| -rw-r--r-- | include/dt-bindings/clock/r8a774c0-cpg-mssr.h | 61 | ||||
| -rw-r--r-- | include/dt-bindings/clock/xlnx-versal-clk.h | 123 | ||||
| -rw-r--r-- | include/dt-bindings/mux/mux.h | 17 | ||||
| -rw-r--r-- | include/dt-bindings/pinctrl/k210-pinctrl.h | 277 | ||||
| -rw-r--r-- | include/dt-bindings/pinctrl/sandbox-pinmux.h | 19 | ||||
| -rw-r--r-- | include/dt-bindings/power/r8a774c0-sysc.h | 25 | ||||
| -rw-r--r-- | include/dt-bindings/power/xlnx-versal-power.h | 42 | ||||
| -rw-r--r-- | include/dt-bindings/reset/ast2500-reset.h | 73 |
8 files changed, 603 insertions, 34 deletions
diff --git a/include/dt-bindings/clock/r8a774c0-cpg-mssr.h b/include/dt-bindings/clock/r8a774c0-cpg-mssr.h new file mode 100644 index 0000000000..9db5c76e23 --- /dev/null +++ b/include/dt-bindings/clock/r8a774c0-cpg-mssr.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_CLOCK_R8A774C0_CPG_MSSR_H__ +#define __DT_BINDINGS_CLOCK_R8A774C0_CPG_MSSR_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* r8a774c0 CPG Core Clocks */ +#define R8A774C0_CLK_Z2 0 +#define R8A774C0_CLK_ZG 1 +#define R8A774C0_CLK_ZTR 2 +#define R8A774C0_CLK_ZT 3 +#define R8A774C0_CLK_ZX 4 +#define R8A774C0_CLK_S0D1 5 +#define R8A774C0_CLK_S0D3 6 +#define R8A774C0_CLK_S0D6 7 +#define R8A774C0_CLK_S0D12 8 +#define R8A774C0_CLK_S0D24 9 +#define R8A774C0_CLK_S1D1 10 +#define R8A774C0_CLK_S1D2 11 +#define R8A774C0_CLK_S1D4 12 +#define R8A774C0_CLK_S2D1 13 +#define R8A774C0_CLK_S2D2 14 +#define R8A774C0_CLK_S2D4 15 +#define R8A774C0_CLK_S3D1 16 +#define R8A774C0_CLK_S3D2 17 +#define R8A774C0_CLK_S3D4 18 +#define R8A774C0_CLK_S0D6C 19 +#define R8A774C0_CLK_S3D1C 20 +#define R8A774C0_CLK_S3D2C 21 +#define R8A774C0_CLK_S3D4C 22 +#define R8A774C0_CLK_LB 23 +#define R8A774C0_CLK_CL 24 +#define R8A774C0_CLK_ZB3 25 +#define R8A774C0_CLK_ZB3D2 26 +#define R8A774C0_CLK_CR 27 +#define R8A774C0_CLK_CRD2 28 +#define R8A774C0_CLK_SD0H 29 +#define R8A774C0_CLK_SD0 30 +#define R8A774C0_CLK_SD1H 31 +#define R8A774C0_CLK_SD1 32 +#define R8A774C0_CLK_SD3H 33 +#define R8A774C0_CLK_SD3 34 +#define R8A774C0_CLK_RPC 35 +#define R8A774C0_CLK_RPCD2 36 +#define R8A774C0_CLK_ZA2 37 +#define R8A774C0_CLK_ZA8 38 +#define R8A774C0_CLK_Z2D 39 +#define R8A774C0_CLK_MSO 40 +#define R8A774C0_CLK_R 41 +#define R8A774C0_CLK_OSC 42 +#define R8A774C0_CLK_LV0 43 +#define R8A774C0_CLK_LV1 44 +#define R8A774C0_CLK_CSI0 45 +#define R8A774C0_CLK_CP 46 +#define R8A774C0_CLK_CPEX 47 +#define R8A774C0_CLK_CANFD 48 + +#endif /* __DT_BINDINGS_CLOCK_R8A774C0_CPG_MSSR_H__ */ diff --git a/include/dt-bindings/clock/xlnx-versal-clk.h b/include/dt-bindings/clock/xlnx-versal-clk.h new file mode 100644 index 0000000000..264d634d22 --- /dev/null +++ b/include/dt-bindings/clock/xlnx-versal-clk.h @@ -0,0 +1,123 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 Xilinx Inc. + * + */ + +#ifndef _DT_BINDINGS_CLK_VERSAL_H +#define _DT_BINDINGS_CLK_VERSAL_H + +#define PMC_PLL 1 +#define APU_PLL 2 +#define RPU_PLL 3 +#define CPM_PLL 4 +#define NOC_PLL 5 +#define PLL_MAX 6 +#define PMC_PRESRC 7 +#define PMC_POSTCLK 8 +#define PMC_PLL_OUT 9 +#define PPLL 10 +#define NOC_PRESRC 11 +#define NOC_POSTCLK 12 +#define NOC_PLL_OUT 13 +#define NPLL 14 +#define APU_PRESRC 15 +#define APU_POSTCLK 16 +#define APU_PLL_OUT 17 +#define APLL 18 +#define RPU_PRESRC 19 +#define RPU_POSTCLK 20 +#define RPU_PLL_OUT 21 +#define RPLL 22 +#define CPM_PRESRC 23 +#define CPM_POSTCLK 24 +#define CPM_PLL_OUT 25 +#define CPLL 26 +#define PPLL_TO_XPD 27 +#define NPLL_TO_XPD 28 +#define APLL_TO_XPD 29 +#define RPLL_TO_XPD 30 +#define EFUSE_REF 31 +#define SYSMON_REF 32 +#define IRO_SUSPEND_REF 33 +#define USB_SUSPEND 34 +#define SWITCH_TIMEOUT 35 +#define RCLK_PMC 36 +#define RCLK_LPD 37 +#define WDT 38 +#define TTC0 39 +#define TTC1 40 +#define TTC2 41 +#define TTC3 42 +#define GEM_TSU 43 +#define GEM_TSU_LB 44 +#define MUXED_IRO_DIV2 45 +#define MUXED_IRO_DIV4 46 +#define PSM_REF 47 +#define GEM0_RX 48 +#define GEM0_TX 49 +#define GEM1_RX 50 +#define GEM1_TX 51 +#define CPM_CORE_REF 52 +#define CPM_LSBUS_REF 53 +#define CPM_DBG_REF 54 +#define CPM_AUX0_REF 55 +#define CPM_AUX1_REF 56 +#define QSPI_REF 57 +#define OSPI_REF 58 +#define SDIO0_REF 59 +#define SDIO1_REF 60 +#define PMC_LSBUS_REF 61 +#define I2C_REF 62 +#define TEST_PATTERN_REF 63 +#define DFT_OSC_REF 64 +#define PMC_PL0_REF 65 +#define PMC_PL1_REF 66 +#define PMC_PL2_REF 67 +#define PMC_PL3_REF 68 +#define CFU_REF 69 +#define SPARE_REF 70 +#define NPI_REF 71 +#define HSM0_REF 72 +#define HSM1_REF 73 +#define SD_DLL_REF 74 +#define FPD_TOP_SWITCH 75 +#define FPD_LSBUS 76 +#define ACPU 77 +#define DBG_TRACE 78 +#define DBG_FPD 79 +#define LPD_TOP_SWITCH 80 +#define ADMA 81 +#define LPD_LSBUS 82 +#define CPU_R5 83 +#define CPU_R5_CORE 84 +#define CPU_R5_OCM 85 +#define CPU_R5_OCM2 86 +#define IOU_SWITCH 87 +#define GEM0_REF 88 +#define GEM1_REF 89 +#define GEM_TSU_REF 90 +#define USB0_BUS_REF 91 +#define UART0_REF 92 +#define UART1_REF 93 +#define SPI0_REF 94 +#define SPI1_REF 95 +#define CAN0_REF 96 +#define CAN1_REF 97 +#define I2C0_REF 98 +#define I2C1_REF 99 +#define DBG_LPD 100 +#define TIMESTAMP_REF 101 +#define DBG_TSTMP 102 +#define CPM_TOPSW_REF 103 +#define USB3_DUAL_REF 104 +#define OUTCLK_MAX 105 +#define REF_CLK 106 +#define PL_ALT_REF_CLK 107 +#define MUXED_IRO 108 +#define PL_EXT 109 +#define PL_LB 110 +#define MIO_50_OR_51 111 +#define MIO_24_OR_25 112 + +#endif diff --git a/include/dt-bindings/mux/mux.h b/include/dt-bindings/mux/mux.h new file mode 100644 index 0000000000..042719218d --- /dev/null +++ b/include/dt-bindings/mux/mux.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header provides constants for most Multiplexer bindings. + * + * Most Multiplexer bindings specify an idle state. In most cases, the + * the multiplexer can be left as is when idle, and in some cases it can + * disconnect the input/output and leave the multiplexer in a high + * impedance state. + */ + +#ifndef _DT_BINDINGS_MUX_MUX_H +#define _DT_BINDINGS_MUX_MUX_H + +#define MUX_IDLE_AS_IS (-1) +#define MUX_IDLE_DISCONNECT (-2) + +#endif diff --git a/include/dt-bindings/pinctrl/k210-pinctrl.h b/include/dt-bindings/pinctrl/k210-pinctrl.h new file mode 100644 index 0000000000..26c1f23b0f --- /dev/null +++ b/include/dt-bindings/pinctrl/k210-pinctrl.h @@ -0,0 +1,277 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2020 Sean Anderson <seanga2@gmail.com> + */ + +#ifndef DT_K210_PINCTRL_H +#define DT_K210_PINCTRL_H + +/* + * Full list of FPIOA functions from + * kendryte-standalone-sdk/lib/drivers/include/fpioa.h + */ +#define K210_PCF_MASK GENMASK(7, 0) +#define K210_PCF_JTAG_TCLK 0 /* JTAG Test Clock */ +#define K210_PCF_JTAG_TDI 1 /* JTAG Test Data In */ +#define K210_PCF_JTAG_TMS 2 /* JTAG Test Mode Select */ +#define K210_PCF_JTAG_TDO 3 /* JTAG Test Data Out */ +#define K210_PCF_SPI0_D0 4 /* SPI0 Data 0 */ +#define K210_PCF_SPI0_D1 5 /* SPI0 Data 1 */ +#define K210_PCF_SPI0_D2 6 /* SPI0 Data 2 */ +#define K210_PCF_SPI0_D3 7 /* SPI0 Data 3 */ +#define K210_PCF_SPI0_D4 8 /* SPI0 Data 4 */ +#define K210_PCF_SPI0_D5 9 /* SPI0 Data 5 */ +#define K210_PCF_SPI0_D6 10 /* SPI0 Data 6 */ +#define K210_PCF_SPI0_D7 11 /* SPI0 Data 7 */ +#define K210_PCF_SPI0_SS0 12 /* SPI0 Chip Select 0 */ +#define K210_PCF_SPI0_SS1 13 /* SPI0 Chip Select 1 */ +#define K210_PCF_SPI0_SS2 14 /* SPI0 Chip Select 2 */ +#define K210_PCF_SPI0_SS3 15 /* SPI0 Chip Select 3 */ +#define K210_PCF_SPI0_ARB 16 /* SPI0 Arbitration */ +#define K210_PCF_SPI0_SCLK 17 /* SPI0 Serial Clock */ +#define K210_PCF_UARTHS_RX 18 /* UART High speed Receiver */ +#define K210_PCF_UARTHS_TX 19 /* UART High speed Transmitter */ +#define K210_PCF_RESV6 20 /* Reserved function */ +#define K210_PCF_RESV7 21 /* Reserved function */ +#define K210_PCF_CLK_SPI1 22 /* Clock SPI1 */ +#define K210_PCF_CLK_I2C1 23 /* Clock I2C1 */ +#define K210_PCF_GPIOHS0 24 /* GPIO High speed 0 */ +#define K210_PCF_GPIOHS1 25 /* GPIO High speed 1 */ +#define K210_PCF_GPIOHS2 26 /* GPIO High speed 2 */ +#define K210_PCF_GPIOHS3 27 /* GPIO High speed 3 */ +#define K210_PCF_GPIOHS4 28 /* GPIO High speed 4 */ +#define K210_PCF_GPIOHS5 29 /* GPIO High speed 5 */ +#define K210_PCF_GPIOHS6 30 /* GPIO High speed 6 */ +#define K210_PCF_GPIOHS7 31 /* GPIO High speed 7 */ +#define K210_PCF_GPIOHS8 32 /* GPIO High speed 8 */ +#define K210_PCF_GPIOHS9 33 /* GPIO High speed 9 */ +#define K210_PCF_GPIOHS10 34 /* GPIO High speed 10 */ +#define K210_PCF_GPIOHS11 35 /* GPIO High speed 11 */ +#define K210_PCF_GPIOHS12 36 /* GPIO High speed 12 */ +#define K210_PCF_GPIOHS13 37 /* GPIO High speed 13 */ +#define K210_PCF_GPIOHS14 38 /* GPIO High speed 14 */ +#define K210_PCF_GPIOHS15 39 /* GPIO High speed 15 */ +#define K210_PCF_GPIOHS16 40 /* GPIO High speed 16 */ +#define K210_PCF_GPIOHS17 41 /* GPIO High speed 17 */ +#define K210_PCF_GPIOHS18 42 /* GPIO High speed 18 */ +#define K210_PCF_GPIOHS19 43 /* GPIO High speed 19 */ +#define K210_PCF_GPIOHS20 44 /* GPIO High speed 20 */ +#define K210_PCF_GPIOHS21 45 /* GPIO High speed 21 */ +#define K210_PCF_GPIOHS22 46 /* GPIO High speed 22 */ +#define K210_PCF_GPIOHS23 47 /* GPIO High speed 23 */ +#define K210_PCF_GPIOHS24 48 /* GPIO High speed 24 */ +#define K210_PCF_GPIOHS25 49 /* GPIO High speed 25 */ +#define K210_PCF_GPIOHS26 50 /* GPIO High speed 26 */ +#define K210_PCF_GPIOHS27 51 /* GPIO High speed 27 */ +#define K210_PCF_GPIOHS28 52 /* GPIO High speed 28 */ +#define K210_PCF_GPIOHS29 53 /* GPIO High speed 29 */ +#define K210_PCF_GPIOHS30 54 /* GPIO High speed 30 */ +#define K210_PCF_GPIOHS31 55 /* GPIO High speed 31 */ +#define K210_PCF_GPIO0 56 /* GPIO pin 0 */ +#define K210_PCF_GPIO1 57 /* GPIO pin 1 */ +#define K210_PCF_GPIO2 58 /* GPIO pin 2 */ +#define K210_PCF_GPIO3 59 /* GPIO pin 3 */ +#define K210_PCF_GPIO4 60 /* GPIO pin 4 */ +#define K210_PCF_GPIO5 61 /* GPIO pin 5 */ +#define K210_PCF_GPIO6 62 /* GPIO pin 6 */ +#define K210_PCF_GPIO7 63 /* GPIO pin 7 */ +#define K210_PCF_UART1_RX 64 /* UART1 Receiver */ +#define K210_PCF_UART1_TX 65 /* UART1 Transmitter */ +#define K210_PCF_UART2_RX 66 /* UART2 Receiver */ +#define K210_PCF_UART2_TX 67 /* UART2 Transmitter */ +#define K210_PCF_UART3_RX 68 /* UART3 Receiver */ +#define K210_PCF_UART3_TX 69 /* UART3 Transmitter */ +#define K210_PCF_SPI1_D0 70 /* SPI1 Data 0 */ +#define K210_PCF_SPI1_D1 71 /* SPI1 Data 1 */ +#define K210_PCF_SPI1_D2 72 /* SPI1 Data 2 */ +#define K210_PCF_SPI1_D3 73 /* SPI1 Data 3 */ +#define K210_PCF_SPI1_D4 74 /* SPI1 Data 4 */ +#define K210_PCF_SPI1_D5 75 /* SPI1 Data 5 */ +#define K210_PCF_SPI1_D6 76 /* SPI1 Data 6 */ +#define K210_PCF_SPI1_D7 77 /* SPI1 Data 7 */ +#define K210_PCF_SPI1_SS0 78 /* SPI1 Chip Select 0 */ +#define K210_PCF_SPI1_SS1 79 /* SPI1 Chip Select 1 */ +#define K210_PCF_SPI1_SS2 80 /* SPI1 Chip Select 2 */ +#define K210_PCF_SPI1_SS3 81 /* SPI1 Chip Select 3 */ +#define K210_PCF_SPI1_ARB 82 /* SPI1 Arbitration */ +#define K210_PCF_SPI1_SCLK 83 /* SPI1 Serial Clock */ +#define K210_PCF_SPI2_D0 84 /* SPI2 Data 0 */ +#define K210_PCF_SPI2_SS 85 /* SPI2 Select */ +#define K210_PCF_SPI2_SCLK 86 /* SPI2 Serial Clock */ +#define K210_PCF_I2S0_MCLK 87 /* I2S0 Master Clock */ +#define K210_PCF_I2S0_SCLK 88 /* I2S0 Serial Clock(BCLK) */ +#define K210_PCF_I2S0_WS 89 /* I2S0 Word Select(LRCLK) */ +#define K210_PCF_I2S0_IN_D0 90 /* I2S0 Serial Data Input 0 */ +#define K210_PCF_I2S0_IN_D1 91 /* I2S0 Serial Data Input 1 */ +#define K210_PCF_I2S0_IN_D2 92 /* I2S0 Serial Data Input 2 */ +#define K210_PCF_I2S0_IN_D3 93 /* I2S0 Serial Data Input 3 */ +#define K210_PCF_I2S0_OUT_D0 94 /* I2S0 Serial Data Output 0 */ +#define K210_PCF_I2S0_OUT_D1 95 /* I2S0 Serial Data Output 1 */ +#define K210_PCF_I2S0_OUT_D2 96 /* I2S0 Serial Data Output 2 */ +#define K210_PCF_I2S0_OUT_D3 97 /* I2S0 Serial Data Output 3 */ +#define K210_PCF_I2S1_MCLK 98 /* I2S1 Master Clock */ +#define K210_PCF_I2S1_SCLK 99 /* I2S1 Serial Clock(BCLK) */ +#define K210_PCF_I2S1_WS 100 /* I2S1 Word Select(LRCLK) */ +#define K210_PCF_I2S1_IN_D0 101 /* I2S1 Serial Data Input 0 */ +#define K210_PCF_I2S1_IN_D1 102 /* I2S1 Serial Data Input 1 */ +#define K210_PCF_I2S1_IN_D2 103 /* I2S1 Serial Data Input 2 */ +#define K210_PCF_I2S1_IN_D3 104 /* I2S1 Serial Data Input 3 */ +#define K210_PCF_I2S1_OUT_D0 105 /* I2S1 Serial Data Output 0 */ +#define K210_PCF_I2S1_OUT_D1 106 /* I2S1 Serial Data Output 1 */ +#define K210_PCF_I2S1_OUT_D2 107 /* I2S1 Serial Data Output 2 */ +#define K210_PCF_I2S1_OUT_D3 108 /* I2S1 Serial Data Output 3 */ +#define K210_PCF_I2S2_MCLK 109 /* I2S2 Master Clock */ +#define K210_PCF_I2S2_SCLK 110 /* I2S2 Serial Clock(BCLK) */ +#define K210_PCF_I2S2_WS 111 /* I2S2 Word Select(LRCLK) */ +#define K210_PCF_I2S2_IN_D0 112 /* I2S2 Serial Data Input 0 */ +#define K210_PCF_I2S2_IN_D1 113 /* I2S2 Serial Data Input 1 */ +#define K210_PCF_I2S2_IN_D2 114 /* I2S2 Serial Data Input 2 */ +#define K210_PCF_I2S2_IN_D3 115 /* I2S2 Serial Data Input 3 */ +#define K210_PCF_I2S2_OUT_D0 116 /* I2S2 Serial Data Output 0 */ +#define K210_PCF_I2S2_OUT_D1 117 /* I2S2 Serial Data Output 1 */ +#define K210_PCF_I2S2_OUT_D2 118 /* I2S2 Serial Data Output 2 */ +#define K210_PCF_I2S2_OUT_D3 119 /* I2S2 Serial Data Output 3 */ +#define K210_PCF_RESV0 120 /* Reserved function */ +#define K210_PCF_RESV1 121 /* Reserved function */ +#define K210_PCF_RESV2 122 /* Reserved function */ +#define K210_PCF_RESV3 123 /* Reserved function */ +#define K210_PCF_RESV4 124 /* Reserved function */ +#define K210_PCF_RESV5 125 /* Reserved function */ +#define K210_PCF_I2C0_SCLK 126 /* I2C0 Serial Clock */ +#define K210_PCF_I2C0_SDA 127 /* I2C0 Serial Data */ +#define K210_PCF_I2C1_SCLK 128 /* I2C1 Serial Clock */ +#define K210_PCF_I2C1_SDA 129 /* I2C1 Serial Data */ +#define K210_PCF_I2C2_SCLK 130 /* I2C2 Serial Clock */ +#define K210_PCF_I2C2_SDA 131 /* I2C2 Serial Data */ +#define K210_PCF_DVP_XCLK 132 /* DVP System Clock */ +#define K210_PCF_DVP_RST 133 /* DVP System Reset */ +#define K210_PCF_DVP_PWDN 134 /* DVP Power Down Mode */ +#define K210_PCF_DVP_VSYNC 135 /* DVP Vertical Sync */ +#define K210_PCF_DVP_HSYNC 136 /* DVP Horizontal Sync */ +#define K210_PCF_DVP_PCLK 137 /* Pixel Clock */ +#define K210_PCF_DVP_D0 138 /* Data Bit 0 */ +#define K210_PCF_DVP_D1 139 /* Data Bit 1 */ +#define K210_PCF_DVP_D2 140 /* Data Bit 2 */ +#define K210_PCF_DVP_D3 141 /* Data Bit 3 */ +#define K210_PCF_DVP_D4 142 /* Data Bit 4 */ +#define K210_PCF_DVP_D5 143 /* Data Bit 5 */ +#define K210_PCF_DVP_D6 144 /* Data Bit 6 */ +#define K210_PCF_DVP_D7 145 /* Data Bit 7 */ +#define K210_PCF_SCCB_SCLK 146 /* Serial Camera Control Bus Clock */ +#define K210_PCF_SCCB_SDA 147 /* Serial Camera Control Bus Data */ +#define K210_PCF_UART1_CTS 148 /* UART1 Clear To Send */ +#define K210_PCF_UART1_DSR 149 /* UART1 Data Set Ready */ +#define K210_PCF_UART1_DCD 150 /* UART1 Data Carrier Detect */ +#define K210_PCF_UART1_RI 151 /* UART1 Ring Indicator */ +#define K210_PCF_UART1_SIR_IN 152 /* UART1 Serial Infrared Input */ +#define K210_PCF_UART1_DTR 153 /* UART1 Data Terminal Ready */ +#define K210_PCF_UART1_RTS 154 /* UART1 Request To Send */ +#define K210_PCF_UART1_OUT2 155 /* UART1 User-designated Output 2 */ +#define K210_PCF_UART1_OUT1 156 /* UART1 User-designated Output 1 */ +#define K210_PCF_UART1_SIR_OUT 157 /* UART1 Serial Infrared Output */ +#define K210_PCF_UART1_BAUD 158 /* UART1 Transmit Clock Output */ +#define K210_PCF_UART1_RE 159 /* UART1 Receiver Output Enable */ +#define K210_PCF_UART1_DE 160 /* UART1 Driver Output Enable */ +#define K210_PCF_UART1_RS485_EN 161 /* UART1 RS485 Enable */ +#define K210_PCF_UART2_CTS 162 /* UART2 Clear To Send */ +#define K210_PCF_UART2_DSR 163 /* UART2 Data Set Ready */ +#define K210_PCF_UART2_DCD 164 /* UART2 Data Carrier Detect */ +#define K210_PCF_UART2_RI 165 /* UART2 Ring Indicator */ +#define K210_PCF_UART2_SIR_IN 166 /* UART2 Serial Infrared Input */ +#define K210_PCF_UART2_DTR 167 /* UART2 Data Terminal Ready */ +#define K210_PCF_UART2_RTS 168 /* UART2 Request To Send */ +#define K210_PCF_UART2_OUT2 169 /* UART2 User-designated Output 2 */ +#define K210_PCF_UART2_OUT1 170 /* UART2 User-designated Output 1 */ +#define K210_PCF_UART2_SIR_OUT 171 /* UART2 Serial Infrared Output */ +#define K210_PCF_UART2_BAUD 172 /* UART2 Transmit Clock Output */ +#define K210_PCF_UART2_RE 173 /* UART2 Receiver Output Enable */ +#define K210_PCF_UART2_DE 174 /* UART2 Driver Output Enable */ +#define K210_PCF_UART2_RS485_EN 175 /* UART2 RS485 Enable */ +#define K210_PCF_UART3_CTS 176 /* UART3 Clear To Send */ +#define K210_PCF_UART3_DSR 177 /* UART3 Data Set Ready */ +#define K210_PCF_UART3_DCD 178 /* UART3 Data Carrier Detect */ +#define K210_PCF_UART3_RI 179 /* UART3 Ring Indicator */ +#define K210_PCF_UART3_SIR_IN 180 /* UART3 Serial Infrared Input */ +#define K210_PCF_UART3_DTR 181 /* UART3 Data Terminal Ready */ +#define K210_PCF_UART3_RTS 182 /* UART3 Request To Send */ +#define K210_PCF_UART3_OUT2 183 /* UART3 User-designated Output 2 */ +#define K210_PCF_UART3_OUT1 184 /* UART3 User-designated Output 1 */ +#define K210_PCF_UART3_SIR_OUT 185 /* UART3 Serial Infrared Output */ +#define K210_PCF_UART3_BAUD 186 /* UART3 Transmit Clock Output */ +#define K210_PCF_UART3_RE 187 /* UART3 Receiver Output Enable */ +#define K210_PCF_UART3_DE 188 /* UART3 Driver Output Enable */ +#define K210_PCF_UART3_RS485_EN 189 /* UART3 RS485 Enable */ +#define K210_PCF_TIMER0_TOGGLE1 190 /* TIMER0 Toggle Output 1 */ +#define K210_PCF_TIMER0_TOGGLE2 191 /* TIMER0 Toggle Output 2 */ +#define K210_PCF_TIMER0_TOGGLE3 192 /* TIMER0 Toggle Output 3 */ +#define K210_PCF_TIMER0_TOGGLE4 193 /* TIMER0 Toggle Output 4 */ +#define K210_PCF_TIMER1_TOGGLE1 194 /* TIMER1 Toggle Output 1 */ +#define K210_PCF_TIMER1_TOGGLE2 195 /* TIMER1 Toggle Output 2 */ +#define K210_PCF_TIMER1_TOGGLE3 196 /* TIMER1 Toggle Output 3 */ +#define K210_PCF_TIMER1_TOGGLE4 197 /* TIMER1 Toggle Output 4 */ +#define K210_PCF_TIMER2_TOGGLE1 198 /* TIMER2 Toggle Output 1 */ +#define K210_PCF_TIMER2_TOGGLE2 199 /* TIMER2 Toggle Output 2 */ +#define K210_PCF_TIMER2_TOGGLE3 200 /* TIMER2 Toggle Output 3 */ +#define K210_PCF_TIMER2_TOGGLE4 201 /* TIMER2 Toggle Output 4 */ +#define K210_PCF_CLK_SPI2 202 /* Clock SPI2 */ +#define K210_PCF_CLK_I2C2 203 /* Clock I2C2 */ +#define K210_PCF_INTERNAL0 204 /* Internal function signal 0 */ +#define K210_PCF_INTERNAL1 205 /* Internal function signal 1 */ +#define K210_PCF_INTERNAL2 206 /* Internal function signal 2 */ +#define K210_PCF_INTERNAL3 207 /* Internal function signal 3 */ +#define K210_PCF_INTERNAL4 208 /* Internal function signal 4 */ +#define K210_PCF_INTERNAL5 209 /* Internal function signal 5 */ +#define K210_PCF_INTERNAL6 210 /* Internal function signal 6 */ +#define K210_PCF_INTERNAL7 211 /* Internal function signal 7 */ +#define K210_PCF_INTERNAL8 212 /* Internal function signal 8 */ +#define K210_PCF_INTERNAL9 213 /* Internal function signal 9 */ +#define K210_PCF_INTERNAL10 214 /* Internal function signal 10 */ +#define K210_PCF_INTERNAL11 215 /* Internal function signal 11 */ +#define K210_PCF_INTERNAL12 216 /* Internal function signal 12 */ +#define K210_PCF_INTERNAL13 217 /* Internal function signal 13 */ +#define K210_PCF_INTERNAL14 218 /* Internal function signal 14 */ +#define K210_PCF_INTERNAL15 219 /* Internal function signal 15 */ +#define K210_PCF_INTERNAL16 220 /* Internal function signal 16 */ +#define K210_PCF_INTERNAL17 221 /* Internal function signal 17 */ +#define K210_PCF_CONSTANT 222 /* Constant function */ +#define K210_PCF_INTERNAL18 223 /* Internal function signal 18 */ +#define K210_PCF_DEBUG0 224 /* Debug function 0 */ +#define K210_PCF_DEBUG1 225 /* Debug function 1 */ +#define K210_PCF_DEBUG2 226 /* Debug function 2 */ +#define K210_PCF_DEBUG3 227 /* Debug function 3 */ +#define K210_PCF_DEBUG4 228 /* Debug function 4 */ +#define K210_PCF_DEBUG5 229 /* Debug function 5 */ +#define K210_PCF_DEBUG6 230 /* Debug function 6 */ +#define K210_PCF_DEBUG7 231 /* Debug function 7 */ +#define K210_PCF_DEBUG8 232 /* Debug function 8 */ +#define K210_PCF_DEBUG9 233 /* Debug function 9 */ +#define K210_PCF_DEBUG10 234 /* Debug function 10 */ +#define K210_PCF_DEBUG11 235 /* Debug function 11 */ +#define K210_PCF_DEBUG12 236 /* Debug function 12 */ +#define K210_PCF_DEBUG13 237 /* Debug function 13 */ +#define K210_PCF_DEBUG14 238 /* Debug function 14 */ +#define K210_PCF_DEBUG15 239 /* Debug function 15 */ +#define K210_PCF_DEBUG16 240 /* Debug function 16 */ +#define K210_PCF_DEBUG17 241 /* Debug function 17 */ +#define K210_PCF_DEBUG18 242 /* Debug function 18 */ +#define K210_PCF_DEBUG19 243 /* Debug function 19 */ +#define K210_PCF_DEBUG20 244 /* Debug function 20 */ +#define K210_PCF_DEBUG21 245 /* Debug function 21 */ +#define K210_PCF_DEBUG22 246 /* Debug function 22 */ +#define K210_PCF_DEBUG23 247 /* Debug function 23 */ +#define K210_PCF_DEBUG24 248 /* Debug function 24 */ +#define K210_PCF_DEBUG25 249 /* Debug function 25 */ +#define K210_PCF_DEBUG26 250 /* Debug function 26 */ +#define K210_PCF_DEBUG27 251 /* Debug function 27 */ +#define K210_PCF_DEBUG28 252 /* Debug function 28 */ +#define K210_PCF_DEBUG29 253 /* Debug function 29 */ +#define K210_PCF_DEBUG30 254 /* Debug function 30 */ +#define K210_PCF_DEBUG31 255 /* Debug function 31 */ + +#define K210_FPIOA(pin, func) (((pin) << 16) | (func)) +#define K210_FPIOA_DO(pin, func) (((pin) << 16) | (1 << 8) | (func)) + +#define K210_PC_POWER_3V3 0 +#define K210_PC_POWER_1V8 1 + +#endif /* DT_K210_PINCTRL_H */ diff --git a/include/dt-bindings/pinctrl/sandbox-pinmux.h b/include/dt-bindings/pinctrl/sandbox-pinmux.h new file mode 100644 index 0000000000..891af072e5 --- /dev/null +++ b/include/dt-bindings/pinctrl/sandbox-pinmux.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 Sean Anderson <seanga2@gmail.com> + */ + +#ifndef SANDBOX_PINMUX_H +#define SANDBOX_PINMUX_H + +#define SANDBOX_PINMUX_UART 0 +#define SANDBOX_PINMUX_I2C 1 +#define SANDBOX_PINMUX_SPI 2 +#define SANDBOX_PINMUX_I2S 3 +#define SANDBOX_PINMUX_GPIO 4 +#define SANDBOX_PINMUX_CS 5 +#define SANDBOX_PINMUX_PWM 6 + +#define SANDBOX_PINMUX(pin, func) ((func) << 16 | (pin)) + +#endif /* SANDBOX_PINMUX_H */ diff --git a/include/dt-bindings/power/r8a774c0-sysc.h b/include/dt-bindings/power/r8a774c0-sysc.h new file mode 100644 index 0000000000..dd0cd656d9 --- /dev/null +++ b/include/dt-bindings/power/r8a774c0-sysc.h @@ -0,0 +1,25 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ +#ifndef __DT_BINDINGS_POWER_R8A774C0_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A774C0_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A774C0_PD_CA53_CPU0 5 +#define R8A774C0_PD_CA53_CPU1 6 +#define R8A774C0_PD_A3VC 14 +#define R8A774C0_PD_3DG_A 17 +#define R8A774C0_PD_3DG_B 18 +#define R8A774C0_PD_CA53_SCU 21 +#define R8A774C0_PD_A2VC1 26 + +/* Always-on power area */ +#define R8A774C0_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A774C0_SYSC_H__ */ diff --git a/include/dt-bindings/power/xlnx-versal-power.h b/include/dt-bindings/power/xlnx-versal-power.h new file mode 100644 index 0000000000..1b75175edc --- /dev/null +++ b/include/dt-bindings/power/xlnx-versal-power.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2019 - 2020 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_VERSAL_POWER_H +#define _DT_BINDINGS_VERSAL_POWER_H + +#define PM_DEV_USB_0 (0x18224018U) +#define PM_DEV_GEM_0 (0x18224019U) +#define PM_DEV_GEM_1 (0x1822401aU) +#define PM_DEV_SPI_0 (0x1822401bU) +#define PM_DEV_SPI_1 (0x1822401cU) +#define PM_DEV_I2C_0 (0x1822401dU) +#define PM_DEV_I2C_1 (0x1822401eU) +#define PM_DEV_CAN_FD_0 (0x1822401fU) +#define PM_DEV_CAN_FD_1 (0x18224020U) +#define PM_DEV_UART_0 (0x18224021U) +#define PM_DEV_UART_1 (0x18224022U) +#define PM_DEV_GPIO (0x18224023U) +#define PM_DEV_TTC_0 (0x18224024U) +#define PM_DEV_TTC_1 (0x18224025U) +#define PM_DEV_TTC_2 (0x18224026U) +#define PM_DEV_TTC_3 (0x18224027U) +#define PM_DEV_SWDT_FPD (0x18224029U) +#define PM_DEV_OSPI (0x1822402aU) +#define PM_DEV_QSPI (0x1822402bU) +#define PM_DEV_GPIO_PMC (0x1822402cU) +#define PM_DEV_SDIO_0 (0x1822402eU) +#define PM_DEV_SDIO_1 (0x1822402fU) +#define PM_DEV_RTC (0x18224034U) +#define PM_DEV_ADMA_0 (0x18224035U) +#define PM_DEV_ADMA_1 (0x18224036U) +#define PM_DEV_ADMA_2 (0x18224037U) +#define PM_DEV_ADMA_3 (0x18224038U) +#define PM_DEV_ADMA_4 (0x18224039U) +#define PM_DEV_ADMA_5 (0x1822403aU) +#define PM_DEV_ADMA_6 (0x1822403bU) +#define PM_DEV_ADMA_7 (0x1822403cU) +#define PM_DEV_AI (0x18224072U) + +#endif diff --git a/include/dt-bindings/reset/ast2500-reset.h b/include/dt-bindings/reset/ast2500-reset.h index d1b6b23fc1..cc85a31edf 100644 --- a/include/dt-bindings/reset/ast2500-reset.h +++ b/include/dt-bindings/reset/ast2500-reset.h @@ -1,44 +1,49 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* * Copyright 2017 Google, Inc + * Copyright 2020 ASPEED Technology Inc. */ #ifndef _ABI_MACH_ASPEED_AST2500_RESET_H_ #define _ABI_MACH_ASPEED_AST2500_RESET_H_ -/* - * The values are intentionally layed out as flags in - * WDT reset parameter. - */ - -#define AST_RESET_SOC 0 -#define AST_RESET_CHIP 1 -#define AST_RESET_CPU (1 << 1) -#define AST_RESET_ARM (1 << 2) -#define AST_RESET_COPROC (1 << 3) -#define AST_RESET_SDRAM (1 << 4) -#define AST_RESET_AHB (1 << 5) -#define AST_RESET_I2C (1 << 6) -#define AST_RESET_MAC1 (1 << 7) -#define AST_RESET_MAC2 (1 << 8) -#define AST_RESET_GCRT (1 << 9) -#define AST_RESET_USB20 (1 << 10) -#define AST_RESET_USB11_HOST (1 << 11) -#define AST_RESET_USB11_HID (1 << 12) -#define AST_RESET_VIDEO (1 << 13) -#define AST_RESET_HAC (1 << 14) -#define AST_RESET_LPC (1 << 15) -#define AST_RESET_SDIO (1 << 16) -#define AST_RESET_MIC (1 << 17) -#define AST_RESET_CRT2D (1 << 18) -#define AST_RESET_PWM (1 << 19) -#define AST_RESET_PECI (1 << 20) -#define AST_RESET_JTAG (1 << 21) -#define AST_RESET_ADC (1 << 22) -#define AST_RESET_GPIO (1 << 23) -#define AST_RESET_MCTP (1 << 24) -#define AST_RESET_XDMA (1 << 25) -#define AST_RESET_SPI (1 << 26) -#define AST_RESET_MISC (1 << 27) +#define ASPEED_RESET_CRT1 (37) +#define ASPEED_RESET_RESERVED36 (36) +#define ASPEED_RESET_RESERVED35 (35) +#define ASPEED_RESET_RESERVED34 (34) +#define ASPEED_RESET_RESERVED33 (33) +#define ASPEED_RESET_RESERVED32 (32) +#define ASPEED_RESET_RESERVED31 (31) +#define ASPEED_RESET_RESERVED30 (30) +#define ASPEED_RESET_RESERVED29 (29) +#define ASPEED_RESET_RESERVED28 (28) +#define ASPEED_RESET_RESERVED27 (27) +#define ASPEED_RESET_RESERVED26 (26) +#define ASPEED_RESET_XDMA (25) +#define ASPEED_RESET_MCTP (24) +#define ASPEED_RESET_ADC (23) +#define ASPEED_RESET_JTAG_MASTER (22) +#define ASPEED_RESET_RESERVED21 (21) +#define ASPEED_RESET_RESERVED20 (20) +#define ASPEED_RESET_RESERVED19 (19) +#define ASPEED_RESET_MIC (18) +#define ASPEED_RESET_RESERVED17 (17) +#define ASPEED_RESET_SDIO (16) +#define ASPEED_RESET_UHCI (15) +#define ASPEED_RESET_EHCI_P1 (14) +#define ASPEED_RESET_CRT (13) +#define ASPEED_RESET_MAC2 (12) +#define ASPEED_RESET_MAC1 (11) +#define ASPEED_RESET_PECI (10) +#define ASPEED_RESET_PWM (9) +#define ASPEED_RESET_PCI_VGA (8) +#define ASPEED_RESET_2D (7) +#define ASPEED_RESET_VIDEO (6) +#define ASPEED_RESET_LPC_ESPI (5) +#define ASPEED_RESET_HACE (4) +#define ASPEED_RESET_EHCI_P2 (3) +#define ASPEED_RESET_I2C (2) +#define ASPEED_RESET_AHB (1) +#define ASPEED_RESET_SDRAM (0) #endif /* _ABI_MACH_ASPEED_AST2500_RESET_H_ */ |