diff options
Diffstat (limited to 'include/configs/nokia_rx51.h')
| -rw-r--r-- | include/configs/nokia_rx51.h | 174 |
1 files changed, 0 insertions, 174 deletions
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h deleted file mode 100644 index 54eea322dd..0000000000 --- a/include/configs/nokia_rx51.h +++ /dev/null @@ -1,174 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2011-2012 - * Pali Rohár <pali@kernel.org> - * - * (C) Copyright 2010 - * Alistair Buxton <a.j.buxton@gmail.com> - * - * Derived from Beagle Board code: - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff <r-woodruff2@ti.com> - * Syed Mohammed Khasim <x0khasim@ti.com> - * - * Configuration settings for the Nokia RX-51 aka N900. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#include <asm/arch/cpu.h> /* get chip and board defs */ -#include <asm/arch/omap.h> -#include <asm/arch/mem.h> -#include <linux/stringify.h> - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CFG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CFG_SYS_NS16550_COM3 OMAP34XX_UART3 - -#define CFG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 } - -#define GPIO_SLIDE 71 - -/* - * Board ONENAND Info. - */ - -#define CFG_SYS_ONENAND_BASE ONENAND_MAP - -/* Environment information */ -#define CFG_EXTRA_ENV_SETTINGS \ - "usbtty=cdc_acm\0" \ - "stdin=usbtty,serial,keyboard\0" \ - "stdout=usbtty,serial,vidconsole\0" \ - "stderr=usbtty,serial,vidconsole\0" \ - "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \ - "switchmmc=mmc dev ${mmcnum}\0" \ - "kernaddr=0x82008000\0" \ - "initrdaddr=0x84008000\0" \ - "scriptaddr=0x86008000\0" \ - "fileloadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \ - "${fileloadaddr} ${mmcfile}\0" \ - "kernload=setenv fileloadaddr ${kernaddr};" \ - "setenv mmcfile ${mmckernfile};" \ - "run fileload\0" \ - "initrdload=setenv fileloadaddr ${initrdaddr};" \ - "setenv mmcfile ${mmcinitrdfile};" \ - "run fileload\0" \ - "scriptload=setenv fileloadaddr ${scriptaddr};" \ - "setenv mmcfile ${mmcscriptfile};" \ - "run fileload\0" \ - "scriptboot=echo Running ${mmcscriptfile} from mmc " \ - "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \ - "kernboot=echo Booting ${mmckernfile} from mmc " \ - "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} || " \ - "bootz ${kernaddr}\0" \ - "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\ - "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr} || " \ - "bootz ${kernaddr} ${initrdaddr}\0" \ - "attachboot=echo Booting attached kernel image ...;" \ - "setenv setup_omap_atag 1;" \ - "bootm ${attkernaddr} || bootz ${attkernaddr};" \ - "setenv setup_omap_atag\0" \ - "trymmcscriptboot=run switchmmc && run scriptload && run scriptboot\0" \ - "trymmckernboot=run switchmmc && run kernload && run kernboot\0" \ - "trymmckerninitrdboot=run switchmmc && run initrdload && " \ - "run kernload && run kerninitrdboot\0" \ - "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \ - "setenv mmckernfile uImage; run trymmckernboot;" \ - "setenv mmckernfile zImage; run trymmckernboot\0" \ - "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \ - "setenv mmcpart 2; run trymmcpartboot;" \ - "setenv mmcpart 3; run trymmcpartboot;" \ - "setenv mmcpart 4; run trymmcpartboot\0" \ - "trymmcboot=if run switchmmc; then " \ - "setenv mmctype fat;" \ - "run trymmcallpartboot;" \ - "setenv mmctype ext4;" \ - "run trymmcallpartboot;" \ - "fi\0" \ - "emmcboot=setenv mmcnum 1; run trymmcboot\0" \ - "sdboot=setenv mmcnum 0; run trymmcboot\0" \ - "trymmcbootmenu=setenv mmctype fat && run trymmcscriptboot || " \ - "setenv mmctype ext4 && run trymmcscriptboot\0" \ - "preboot=setenv mmcpart 1; setenv mmcscriptfile bootmenu.scr;" \ - "setenv mmcnum 0 && run trymmcbootmenu || " \ - "setenv mmcnum 1 && run trymmcbootmenu;" \ - "if run slide; then true; else " \ - "setenv bootmenu_delay 0;" \ - "setenv bootdelay 0;" \ - "fi\0" \ - "menucmd=bootmenu\0" \ - "bootmenu_0=Attached kernel=run attachboot\0" \ - "bootmenu_1=Internal eMMC=run emmcboot\0" \ - "bootmenu_2=External SD card=run sdboot\0" \ - "bootmenu_3=U-Boot boot order=boot\0" \ - "bootmenu_delay=30\0" \ - "" - -#define CFG_POSTBOOTMENU \ - "echo;" \ - "echo Extra commands:;" \ - "echo run sdboot - Boot from SD card slot.;" \ - "echo run emmcboot - Boot internal eMMC memory.;" \ - "echo run attachboot - Boot attached kernel image.;" \ - "echo" - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CFG_SYS_TIMERBASE (OMAP34XX_GPT2) - -/* - * Physical Memory Map - */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 - -/* - * FLASH and environment organization - */ - -#define CFG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CFG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CFG_SYS_INIT_RAM_SIZE 0x800 - -/* - * Attached kernel image - */ - -#define SDRAM_SIZE 0x10000000 /* 256 MB */ -#define SDRAM_END (CFG_SYS_SDRAM_BASE + SDRAM_SIZE) - -#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */ -#define KERNEL_OFFSET 0x40000 /* 256 kB */ -#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET) -#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE) - -/* Reserve protected RAM for attached kernel */ -#define CFG_PRAM ((KERNEL_MAXSIZE >> 10)+1) - -#endif /* __CONFIG_H */ |