diff options
Diffstat (limited to 'include/configs/km/km_arm.h')
| -rw-r--r-- | include/configs/km/km_arm.h | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h deleted file mode 100644 index a91e5e8f86..0000000000 --- a/include/configs/km/km_arm.h +++ /dev/null @@ -1,158 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2009 - * Marvell Semiconductor <www.marvell.com> - * Prafulla Wadaskar <prafulla@marvell.com> - * - * (C) Copyright 2009 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2010-2011 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - */ - -/* - * for linking errors see - * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html - */ - -#ifndef _CONFIG_KM_ARM_H -#define _CONFIG_KM_ARM_H - -#define CONFIG_NAND_ECC_BCH - -/* include common defines/options for all Keymile boards */ -#include "keymile-common.h" - -/* Increase max size of compressed kernel */ - -#include "asm/arch/config.h" - -/* architecture specific default bootargs */ -#define CONFIG_KM_DEF_BOOT_ARGS_CPU \ - "bootcountaddr=${bootcountaddr} ${mtdparts}" \ - " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}" - -#define CONFIG_KM_DEF_ENV_CPU \ - "u-boot=" CONFIG_HOSTNAME "/u-boot.kwb\0" \ - CONFIG_KM_UPDATE_UBOOT \ - "set_fdthigh=setenv fdt_high ${kernelmem}\0" \ - "checkfdt=" \ - "if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \ - "then true; else setenv cramfsloadfdt true; " \ - "setenv boot bootm ${load_addr_r}; " \ - "echo No FDT found, booting with the kernel " \ - "appended one; fi\0" \ - "" - -/* - * NAND Flash configuration - */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * Other required minimal configurations - */ - -/* - * Ethernet Driver configuration - */ -#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer autoneg timeout */ -#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ -#define CONFIG_PHY_BASE_ADR 0 - -/* - * I2C related stuff - */ -#undef CONFIG_I2C_MVTWSI -#define CONFIG_SYS_I2C_INIT_BOARD - -#define CONFIG_SYS_NUM_I2C_BUSES 6 -#define CONFIG_SYS_I2C_MAX_HOPS 1 -#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \ - } - -#ifndef __ASSEMBLY__ -#include <asm/arch/gpio.h> -#include <linux/delay.h> -#include <linux/stringify.h> -extern void __set_direction(unsigned pin, int high); -#define KM_KIRKWOOD_SDA_PIN 8 -#define KM_KIRKWOOD_SCL_PIN 9 -#define KM_KIRKWOOD_SOFT_I2C_GPIOS 0x0300 -#define KM_KIRKWOOD_ENV_WP 38 - -#define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0) -#define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1) -#define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0) -#define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit) -#define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit) -#endif - -#define I2C_DELAY udelay(1) -#define I2C_SOFT_DECLARATIONS - -/* - * Environment variables configurations - */ -#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR -#define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */ -#else -#define CONFIG_SYS_EEPROM_WREN -#define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */ -#endif - -#define KM_FLASH_GPIO_PIN 16 - -#define CONFIG_KM_UPDATE_UBOOT \ - "update=" \ - "sf probe 0;sf erase 0 +${filesize};" \ - "sf write ${load_addr_r} 0 ${filesize};\0" - -#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR -#define CONFIG_KM_NEW_ENV \ - "newenv=sf probe 0;" \ - "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ - __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" -#else -#define CONFIG_KM_NEW_ENV \ - "newenv=setenv addr 0x100000 && " \ - "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; " \ - "mw.b ${addr} 0 4 && " \ - "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \ - " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \ - "eeprom write " __stringify(CONFIG_SYS_I2C_EEPROM_ADDR) \ - " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0" -#endif - -#ifndef CONFIG_KM_BOARD_EXTRA_ENV -#define CONFIG_KM_BOARD_EXTRA_ENV "" -#endif - -/* - * Default environment variables - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_BOARD_EXTRA_ENV \ - CONFIG_KM_DEF_ENV \ - CONFIG_KM_NEW_ENV \ - "arch=arm\0" \ - "" - -/* additions for new relocation code, must be added to all boards */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* address for the bootcount (taken from end of RAM) */ -#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) - -/* enable POST tests */ -#define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS) -#define CONFIG_POST_SKIP_ENV_FLAGS -#define CONFIG_POST_EXTERNAL_WORD_FUNCS - -#endif /* _CONFIG_KM_ARM_H */ |