diff options
Diffstat (limited to 'drivers/usb/host/ehci-tegra.c')
| -rw-r--r-- | drivers/usb/host/ehci-tegra.c | 322 |
1 files changed, 220 insertions, 102 deletions
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index c6bfbe3999..27705d6627 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -7,6 +7,7 @@ */ #include <common.h> +#include <dm.h> #include <asm/errno.h> #include <asm/io.h> #include <asm-generic/gpio.h> @@ -20,6 +21,8 @@ #include "ehci.h" +DECLARE_GLOBAL_DATA_PTR; + #define USB1_ADDR_MASK 0xFFFF0000 #define HOSTPC1_DEVLC 0x84 @@ -32,9 +35,11 @@ #endif #endif +#ifndef CONFIG_DM_USB enum { USB_PORTS_MAX = 3, /* Maximum ports we allow */ }; +#endif /* Parameters we need for USB */ enum { @@ -61,14 +66,26 @@ enum dr_mode { DR_MODE_OTG, /* supports both */ }; +enum usb_ctlr_type { + USB_CTLR_T20, + USB_CTLR_T30, + USB_CTLR_T114, + + USB_CTRL_COUNT, +}; + /* Information about a USB port */ struct fdt_usb { + struct ehci_ctrl ehci; struct usb_ctlr *reg; /* address of registers in physical memory */ unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */ unsigned ulpi:1; /* 1 if port has external ULPI transceiver */ unsigned enabled:1; /* 1 to enable, 0 to disable */ unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */ +#ifndef CONFIG_DM_USB unsigned initialized:1; /* has this port already been initialized? */ +#endif + enum usb_ctlr_type type; enum usb_init_type init_type; enum dr_mode dr_mode; /* dual role mode */ enum periph_id periph_id;/* peripheral id */ @@ -76,10 +93,10 @@ struct fdt_usb { struct gpio_desc phy_reset_gpio; /* GPIO to reset ULPI phy */ }; +#ifndef CONFIG_DM_USB static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */ static unsigned port_count; /* Number of available ports */ -/* Port that needs to clear CSC after Port Reset */ -static u32 port_addr_clear_csc; +#endif /* * This table has USB timing parameters for each Oscillator frequency we @@ -156,13 +173,14 @@ static const u8 utmip_elastic_limit = 16; static const u8 utmip_hs_sync_start_delay = 9; struct fdt_usb_controller { + /* TODO(sjg@chromium.org): Remove when we only use driver model */ int compat; /* flag to determine whether controller supports hostpc register */ u32 has_hostpc:1; const unsigned *pll_parameter; }; -static struct fdt_usb_controller fdt_usb_controllers[] = { +static struct fdt_usb_controller fdt_usb_controllers[USB_CTRL_COUNT] = { { .compat = COMPAT_NVIDIA_TEGRA20_USB, .has_hostpc = 0, @@ -180,40 +198,36 @@ static struct fdt_usb_controller fdt_usb_controllers[] = { }, }; -static struct fdt_usb_controller *controller; - /* * A known hardware issue where Connect Status Change bit of PORTSC register * of USB1 controller will be set after Port Reset. * We have to clear it in order for later device enumeration to proceed. - * This ehci_powerup_fixup overrides the weak function ehci_powerup_fixup - * in "ehci-hcd.c". */ -void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg) +static void tegra_ehci_powerup_fixup(struct ehci_ctrl *ctrl, + uint32_t *status_reg, uint32_t *reg) { + struct fdt_usb *config = ctrl->priv; + struct fdt_usb_controller *controller; + + controller = &fdt_usb_controllers[config->type]; mdelay(50); /* This is to avoid PORT_ENABLE bit to be cleared in "ehci-hcd.c". */ if (controller->has_hostpc) *reg |= EHCI_PS_PE; - if (((unsigned long)status_reg & TEGRA_USB_ADDR_MASK) != port_addr_clear_csc) + if (!config->has_legacy_mode) return; /* For EHCI_PS_CSC to be cleared in ehci_hcd.c */ if (ehci_readl(status_reg) & EHCI_PS_CSC) *reg |= EHCI_PS_CSC; } -/* - * This ehci_set_usbmode overrides the weak function ehci_set_usbmode - * in "ehci-hcd.c". - */ -void ehci_set_usbmode(int index) +static void tegra_ehci_set_usbmode(struct ehci_ctrl *ctrl) { - struct fdt_usb *config; + struct fdt_usb *config = ctrl->priv; struct usb_ctlr *usbctlr; uint32_t tmp; - config = &port[index]; usbctlr = config->reg; tmp = ehci_readl(&usbctlr->usb_mode); @@ -221,17 +235,17 @@ void ehci_set_usbmode(int index) ehci_writel(&usbctlr->usb_mode, tmp); } -/* - * This ehci_get_port_speed overrides the weak function ehci_get_port_speed - * in "ehci-hcd.c". - */ -int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg) +static int tegra_ehci_get_port_speed(struct ehci_ctrl *ctrl, uint32_t reg) { + struct fdt_usb *config = ctrl->priv; + struct fdt_usb_controller *controller; uint32_t tmp; uint32_t *reg_ptr; + controller = &fdt_usb_controllers[config->type]; if (controller->has_hostpc) { - reg_ptr = (uint32_t *)((u8 *)&hcor->or_usbcmd + HOSTPC1_DEVLC); + reg_ptr = (uint32_t *)((u8 *)&ctrl->hcor->or_usbcmd + + HOSTPC1_DEVLC); tmp = ehci_readl(reg_ptr); return HOSTPC1_PSPD(tmp); } else @@ -263,7 +277,8 @@ static void set_up_vbus(struct fdt_usb *config, enum usb_init_type init) } } -void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr) +static void usbf_reset_controller(struct fdt_usb *config, + struct usb_ctlr *usbctlr) { /* Reset the USB controller with 2us delay */ reset_periph(config->periph_id, 2); @@ -283,7 +298,7 @@ void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr) setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB); } -static const unsigned *get_pll_timing(void) +static const unsigned *get_pll_timing(struct fdt_usb_controller *controller) { const unsigned *timing; @@ -330,6 +345,7 @@ static void init_phy_mux(struct fdt_usb *config, uint pts, static int init_utmi_usb_controller(struct fdt_usb *config, enum usb_init_type init) { + struct fdt_usb_controller *controller; u32 b_sess_valid_mask, val; int loop_count; const unsigned *timing; @@ -362,11 +378,14 @@ static int init_utmi_usb_controller(struct fdt_usb *config, VBUS_SENSE_CTL_MASK, VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT); + controller = &fdt_usb_controllers[config->type]; + debug("controller=%p, type=%d\n", controller, config->type); + /* * PLL Delay CONFIGURATION settings. The following parameters control * the bring up of the plls. */ - timing = get_pll_timing(); + timing = get_pll_timing(controller); if (!controller->has_hostpc) { val = readl(&usbctlr->utmip_misc_cfg1); @@ -517,7 +536,7 @@ static int init_utmi_usb_controller(struct fdt_usb *config, udelay(1); } if (!loop_count) - return -1; + return -ETIMEDOUT; /* Disable ICUSB FS/LS transceiver */ clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1); @@ -560,6 +579,7 @@ static int init_ulpi_usb_controller(struct fdt_usb *config, int loop_count; struct ulpi_viewport ulpi_vp; struct usb_ctlr *usbctlr = config->reg; + int ret; /* set up ULPI reference clock on pllp_out4 */ clock_enable(PERIPH_ID_DEV2_OUT); @@ -605,9 +625,10 @@ static int init_ulpi_usb_controller(struct fdt_usb *config, ulpi_vp.port_num = 0; ulpi_vp.viewport_addr = (u32)&usbctlr->ulpi_viewport; - if (ulpi_init(&ulpi_vp)) { + ret = ulpi_init(&ulpi_vp); + if (ret) { printf("Tegra ULPI viewport init failed\n"); - return -1; + return ret; } ulpi_set_vbus(&ulpi_vp, 1, 1); @@ -624,7 +645,7 @@ static int init_ulpi_usb_controller(struct fdt_usb *config, udelay(1); } if (!loop_count) - return -1; + return -ETIMEDOUT; clrbits_le32(&usbctlr->susp_ctrl, USB_SUSP_CLR); return 0; @@ -635,7 +656,7 @@ static int init_ulpi_usb_controller(struct fdt_usb *config, { printf("No code to set up ULPI controller, please enable" "CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT"); - return -1; + return -ENOSYS; } #endif @@ -662,7 +683,7 @@ static int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config) else { debug("%s: Cannot decode dr_mode '%s'\n", __func__, mode); - return -FDT_ERR_NOTFOUND; + return -EINVAL; } } else { config->dr_mode = DR_MODE_HOST; @@ -674,12 +695,10 @@ static int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config) config->enabled = fdtdec_get_is_enabled(blob, node); config->has_legacy_mode = fdtdec_get_bool(blob, node, "nvidia,has-legacy-mode"); - if (config->has_legacy_mode) - port_addr_clear_csc = (unsigned long)config->reg; config->periph_id = clock_decode_periph_id(blob, node); if (config->periph_id == PERIPH_ID_NONE) { debug("%s: Missing/invalid peripheral ID\n", __func__); - return -FDT_ERR_NOTFOUND; + return -EINVAL; } gpio_request_by_name_nodev(blob, node, "nvidia,vbus-gpio", 0, &config->vbus_gpio, GPIOD_IS_OUT); @@ -695,16 +714,101 @@ static int fdt_decode_usb(const void *blob, int node, struct fdt_usb *config) return 0; } +int usb_common_init(struct fdt_usb *config, enum usb_init_type init) +{ + int ret = 0; + + switch (init) { + case USB_INIT_HOST: + switch (config->dr_mode) { + case DR_MODE_HOST: + case DR_MODE_OTG: + break; + default: + printf("tegrausb: Invalid dr_mode %d for host mode\n", + config->dr_mode); + return -1; + } + break; + case USB_INIT_DEVICE: + if (config->periph_id != PERIPH_ID_USBD) { + printf("tegrausb: Device mode only supported on first USB controller\n"); + return -1; + } + if (!config->utmi) { + printf("tegrausb: Device mode only supported with UTMI PHY\n"); + return -1; + } + switch (config->dr_mode) { + case DR_MODE_DEVICE: + case DR_MODE_OTG: + break; + default: + printf("tegrausb: Invalid dr_mode %d for device mode\n", + config->dr_mode); + return -1; + } + break; + default: + printf("tegrausb: Unknown USB_INIT_* %d\n", init); + return -1; + } + +#ifndef CONFIG_DM_USB + /* skip init, if the port is already initialized */ + if (config->initialized && config->init_type == init) + return 0; +#endif + + debug("%d, %d\n", config->utmi, config->ulpi); + if (config->utmi) + ret = init_utmi_usb_controller(config, init); + else if (config->ulpi) + ret = init_ulpi_usb_controller(config, init); + if (ret) + return ret; + + set_up_vbus(config, init); + + config->init_type = init; + + return 0; +} + +void usb_common_uninit(struct fdt_usb *priv) +{ + struct usb_ctlr *usbctlr; + + usbctlr = priv->reg; + + /* Stop controller */ + writel(0, &usbctlr->usb_cmd); + udelay(1000); + + /* Initiate controller reset */ + writel(2, &usbctlr->usb_cmd); + udelay(1000); +} + +static const struct ehci_ops tegra_ehci_ops = { + .set_usb_mode = tegra_ehci_set_usbmode, + .get_port_speed = tegra_ehci_get_port_speed, + .powerup_fixup = tegra_ehci_powerup_fixup, +}; + +#ifndef CONFIG_DM_USB /* * process_usb_nodes() - Process a list of USB nodes, adding them to our list * of USB ports. * @blob: fdt blob * @node_list: list of nodes to process (any <=0 are ignored) * @count: number of nodes to process + * @id: controller type (enum usb_ctlr_type) * * Return: 0 - ok, -1 - error */ -static int process_usb_nodes(const void *blob, int node_list[], int count) +static int process_usb_nodes(const void *blob, int node_list[], int count, + enum usb_ctlr_type id) { struct fdt_usb config; int node, i; @@ -728,9 +832,11 @@ static int process_usb_nodes(const void *blob, int node_list[], int count) return -1; } if (!clk_done) { - config_clock(get_pll_timing()); + config_clock(get_pll_timing( + &fdt_usb_controllers[id])); clk_done = 1; } + config.type = id; config.initialized = 0; /* add new USB port to the list of available ports */ @@ -747,20 +853,17 @@ int usb_process_devicetree(const void *blob) int i; for (i = 0; i < ARRAY_SIZE(fdt_usb_controllers); i++) { - controller = &fdt_usb_controllers[i]; - count = fdtdec_find_aliases_for_id(blob, "usb", - controller->compat, node_list, USB_PORTS_MAX); + fdt_usb_controllers[i].compat, node_list, + USB_PORTS_MAX); if (count) { - err = process_usb_nodes(blob, node_list, count); + err = process_usb_nodes(blob, node_list, count, i); if (err) printf("%s: Error processing USB node!\n", __func__); return err; } } - if (i == ARRAY_SIZE(fdt_usb_controllers)) - controller = NULL; return err; } @@ -780,68 +883,22 @@ int ehci_hcd_init(int index, enum usb_init_type init, { struct fdt_usb *config; struct usb_ctlr *usbctlr; + int ret; if (index >= port_count) return -1; config = &port[index]; + ehci_set_controller_priv(index, config, &tegra_ehci_ops); - switch (init) { - case USB_INIT_HOST: - switch (config->dr_mode) { - case DR_MODE_HOST: - case DR_MODE_OTG: - break; - default: - printf("tegrausb: Invalid dr_mode %d for host mode\n", - config->dr_mode); - return -1; - } - break; - case USB_INIT_DEVICE: - if (config->periph_id != PERIPH_ID_USBD) { - printf("tegrausb: Device mode only supported on first USB controller\n"); - return -1; - } - if (!config->utmi) { - printf("tegrausb: Device mode only supported with UTMI PHY\n"); - return -1; - } - switch (config->dr_mode) { - case DR_MODE_DEVICE: - case DR_MODE_OTG: - break; - default: - printf("tegrausb: Invalid dr_mode %d for device mode\n", - config->dr_mode); - return -1; - } - break; - default: - printf("tegrausb: Unknown USB_INIT_* %d\n", init); - return -1; - } - - /* skip init, if the port is already initialized */ - if (config->initialized && config->init_type == init) - goto success; - - if (config->utmi && init_utmi_usb_controller(config, init)) { - printf("tegrausb: Cannot init port %d\n", index); - return -1; - } - - if (config->ulpi && init_ulpi_usb_controller(config, init)) { + ret = usb_common_init(config, init); + if (ret) { printf("tegrausb: Cannot init port %d\n", index); - return -1; + return ret; } - set_up_vbus(config, init); - config->initialized = 1; - config->init_type = init; -success: usbctlr = config->reg; *hccr = (struct ehci_hccr *)&usbctlr->cap_length; *hcor = (struct ehci_hcor *)&usbctlr->usb_cmd; @@ -854,19 +911,80 @@ success: */ int ehci_hcd_stop(int index) { - struct usb_ctlr *usbctlr; + usb_common_uninit(&port[index]); - usbctlr = port[index].reg; + port[index].initialized = 0; - /* Stop controller */ - writel(0, &usbctlr->usb_cmd); - udelay(1000); + return 0; +} +#endif /* !CONFIG_DM_USB */ - /* Initiate controller reset */ - writel(2, &usbctlr->usb_cmd); - udelay(1000); +#ifdef CONFIG_DM_USB +static int ehci_usb_ofdata_to_platdata(struct udevice *dev) +{ + struct fdt_usb *priv = dev_get_priv(dev); + int ret; - port[index].initialized = 0; + ret = fdt_decode_usb(gd->fdt_blob, dev->of_offset, priv); + if (ret) + return ret; + + priv->type = dev_get_driver_data(dev); + + return 0; +} + +static int ehci_usb_probe(struct udevice *dev) +{ + struct usb_platdata *plat = dev_get_platdata(dev); + struct fdt_usb *priv = dev_get_priv(dev); + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; + static bool clk_done; + int ret; + + ret = usb_common_init(priv, plat->init_type); + if (ret) + return ret; + hccr = (struct ehci_hccr *)&priv->reg->cap_length; + hcor = (struct ehci_hcor *)&priv->reg->usb_cmd; + if (!clk_done) { + config_clock(get_pll_timing(&fdt_usb_controllers[priv->type])); + clk_done = true; + } + + return ehci_register(dev, hccr, hcor, &tegra_ehci_ops, 0, + plat->init_type); +} + +static int ehci_usb_remove(struct udevice *dev) +{ + int ret; + + ret = ehci_deregister(dev); + if (ret) + return ret; return 0; } + +static const struct udevice_id ehci_usb_ids[] = { + { .compatible = "nvidia,tegra20-ehci", .data = USB_CTLR_T20 }, + { .compatible = "nvidia,tegra30-ehci", .data = USB_CTLR_T30 }, + { .compatible = "nvidia,tegra114-ehci", .data = USB_CTLR_T114 }, + { } +}; + +U_BOOT_DRIVER(usb_ehci) = { + .name = "ehci_tegra", + .id = UCLASS_USB, + .of_match = ehci_usb_ids, + .ofdata_to_platdata = ehci_usb_ofdata_to_platdata, + .probe = ehci_usb_probe, + .remove = ehci_usb_remove, + .ops = &ehci_usb_ops, + .platdata_auto_alloc_size = sizeof(struct usb_platdata), + .priv_auto_alloc_size = sizeof(struct fdt_usb), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; +#endif |