diff options
Diffstat (limited to 'drivers/memory/ti-gpmc.h')
-rw-r--r-- | drivers/memory/ti-gpmc.h | 298 |
1 files changed, 298 insertions, 0 deletions
diff --git a/drivers/memory/ti-gpmc.h b/drivers/memory/ti-gpmc.h new file mode 100644 index 0000000000..90f8e656c8 --- /dev/null +++ b/drivers/memory/ti-gpmc.h @@ -0,0 +1,298 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Texas Instruments GPMC Driver + * + * Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/* GPMC register offsets */ +#define GPMC_REVISION 0x00 +#define GPMC_SYSCONFIG 0x10 +#define GPMC_SYSSTATUS 0x14 +#define GPMC_IRQSTATUS 0x18 +#define GPMC_IRQENABLE 0x1c +#define GPMC_TIMEOUT_CONTROL 0x40 +#define GPMC_ERR_ADDRESS 0x44 +#define GPMC_ERR_TYPE 0x48 +#define GPMC_CONFIG 0x50 +#define GPMC_STATUS 0x54 +#define GPMC_PREFETCH_CONFIG1 0x1e0 +#define GPMC_PREFETCH_CONFIG2 0x1e4 +#define GPMC_PREFETCH_CONTROL 0x1ec +#define GPMC_PREFETCH_STATUS 0x1f0 +#define GPMC_ECC_CONFIG 0x1f4 +#define GPMC_ECC_CONTROL 0x1f8 +#define GPMC_ECC_SIZE_CONFIG 0x1fc +#define GPMC_ECC1_RESULT 0x200 +#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_4 0x300 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_5 0x304 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_6 0x308 /* not available on OMAP2 */ + +/* GPMC ECC control settings */ +#define GPMC_ECC_CTRL_ECCCLEAR 0x100 +#define GPMC_ECC_CTRL_ECCDISABLE 0x000 +#define GPMC_ECC_CTRL_ECCREG1 0x001 +#define GPMC_ECC_CTRL_ECCREG2 0x002 +#define GPMC_ECC_CTRL_ECCREG3 0x003 +#define GPMC_ECC_CTRL_ECCREG4 0x004 +#define GPMC_ECC_CTRL_ECCREG5 0x005 +#define GPMC_ECC_CTRL_ECCREG6 0x006 +#define GPMC_ECC_CTRL_ECCREG7 0x007 +#define GPMC_ECC_CTRL_ECCREG8 0x008 +#define GPMC_ECC_CTRL_ECCREG9 0x009 + +#define GPMC_CONFIG_LIMITEDADDRESS BIT(1) + +#define GPMC_STATUS_EMPTYWRITEBUFFERSTATUS BIT(0) + +#define GPMC_CONFIG2_CSEXTRADELAY BIT(7) +#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7) +#define GPMC_CONFIG4_OEEXTRADELAY BIT(7) +#define GPMC_CONFIG4_WEEXTRADELAY BIT(23) +#define GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN BIT(6) +#define GPMC_CONFIG6_CYCLE2CYCLESAMECSEN BIT(7) + +#define GPMC_CS0_OFFSET 0x60 +#define GPMC_CS_SIZE 0x30 +#define GPMC_BCH_SIZE 0x10 + +/* + * The first 1MB of GPMC address space is typically mapped to + * the internal ROM. Never allocate the first page, to + * facilitate bug detection; even if we didn't boot from ROM. + * As GPMC minimum partition size is 16MB we can only start from + * there. + */ +#define GPMC_MEM_START 0x1000000 +#define GPMC_MEM_END 0x3FFFFFFF + +#define GPMC_CHUNK_SHIFT 24 /* 16 MB */ +#define GPMC_SECTION_SHIFT 28 /* 128 MB */ + +#define CS_NUM_SHIFT 24 +#define ENABLE_PREFETCH (0x1 << 7) +#define DMA_MPU_MODE 2 + +#define GPMC_REVISION_MAJOR(l) (((l) >> 4) & 0xf) +#define GPMC_REVISION_MINOR(l) ((l) & 0xf) + +#define GPMC_HAS_WR_ACCESS 0x1 +#define GPMC_HAS_WR_DATA_MUX_BUS 0x2 +#define GPMC_HAS_MUX_AAD 0x4 + +#define GPMC_NR_WAITPINS 4 + +#define GPMC_CS_CONFIG1 0x00 +#define GPMC_CS_CONFIG2 0x04 +#define GPMC_CS_CONFIG3 0x08 +#define GPMC_CS_CONFIG4 0x0c +#define GPMC_CS_CONFIG5 0x10 +#define GPMC_CS_CONFIG6 0x14 +#define GPMC_CS_CONFIG7 0x18 +#define GPMC_CS_NAND_COMMAND 0x1c +#define GPMC_CS_NAND_ADDRESS 0x20 +#define GPMC_CS_NAND_DATA 0x24 + +/* Control Commands */ +#define GPMC_CONFIG_RDY_BSY 0x00000001 +#define GPMC_CONFIG_DEV_SIZE 0x00000002 +#define GPMC_CONFIG_DEV_TYPE 0x00000003 + +#define GPMC_CONFIG_WP 0x00000005 + +#define GPMC_CONFIG1_WRAPBURST_SUPP BIT(31) +#define GPMC_CONFIG1_READMULTIPLE_SUPP BIT(30) +#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29) +#define GPMC_CONFIG1_READTYPE_SYNC BIT(29) +#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP BIT(28) +#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27) +#define GPMC_CONFIG1_WRITETYPE_SYNC BIT(27) +#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) (((val) & 3) << 25) +/** CLKACTIVATIONTIME Max Ticks */ +#define GPMC_CONFIG1_CLKACTIVATIONTIME_MAX 2 +#define GPMC_CONFIG1_PAGE_LEN(val) (((val) & 3) << 23) +/** ATTACHEDDEVICEPAGELENGTH Max Value */ +#define GPMC_CONFIG1_ATTACHEDDEVICEPAGELENGTH_MAX 2 +#define GPMC_CONFIG1_WAIT_READ_MON BIT(22) +#define GPMC_CONFIG1_WAIT_WRITE_MON BIT(21) +#define GPMC_CONFIG1_WAIT_MON_TIME(val) (((val) & 3) << 18) +/** WAITMONITORINGTIME Max Ticks */ +#define GPMC_CONFIG1_WAITMONITORINGTIME_MAX 2 +#define GPMC_CONFIG1_WAIT_PIN_SEL(val) (((val) & 3) << 16) +#define GPMC_CONFIG1_DEVICESIZE(val) (((val) & 3) << 12) +#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) +/** DEVICESIZE Max Value */ +#define GPMC_CONFIG1_DEVICESIZE_MAX 1 +#define GPMC_CONFIG1_DEVICETYPE(val) (((val) & 3) << 10) +#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) +#define GPMC_CONFIG1_MUXTYPE(val) (((val) & 3) << 8) +#define GPMC_CONFIG1_TIME_PARA_GRAN BIT(4) +#define GPMC_CONFIG1_FCLK_DIV(val) ((val) & 3) +#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) +#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2)) +#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3)) +#define GPMC_CONFIG7_CSVALID BIT(6) + +#define GPMC_CONFIG7_BASEADDRESS_MASK 0x3f +#define GPMC_CONFIG7_CSVALID_MASK BIT(6) +#define GPMC_CONFIG7_MASKADDRESS_OFFSET 8 +#define GPMC_CONFIG7_MASKADDRESS_MASK (0xf << GPMC_CONFIG7_MASKADDRESS_OFFSET) +/* All CONFIG7 bits except reserved bits */ +#define GPMC_CONFIG7_MASK (GPMC_CONFIG7_BASEADDRESS_MASK | \ + GPMC_CONFIG7_CSVALID_MASK | \ + GPMC_CONFIG7_MASKADDRESS_MASK) + +#define GPMC_DEVICETYPE_NOR 0 +#define GPMC_DEVICETYPE_NAND 2 +#define GPMC_CONFIG_WRITEPROTECT 0x00000010 +#define WR_RD_PIN_MONITORING 0x00600000 + +/* ECC commands */ +#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */ +#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */ +#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */ + +#define GPMC_NR_NAND_IRQS 2 /* number of NAND specific IRQs */ + +/* bool type time settings */ +struct gpmc_bool_timings { + bool cycle2cyclediffcsen; + bool cycle2cyclesamecsen; + bool we_extra_delay; + bool oe_extra_delay; + bool adv_extra_delay; + bool cs_extra_delay; + bool time_para_granularity; +}; + +/* + * Note that all values in this struct are in nanoseconds except sync_clk + * (which is in picoseconds), while the register values are in gpmc_fck cycles. + */ +struct gpmc_timings { + /* Minimum clock period for synchronous mode (in picoseconds) */ + u32 sync_clk; + + /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */ + u32 cs_on; /* Assertion time */ + u32 cs_rd_off; /* Read deassertion time */ + u32 cs_wr_off; /* Write deassertion time */ + + /* ADV signal timings corresponding to GPMC_CONFIG3 */ + u32 adv_on; /* Assertion time */ + u32 adv_rd_off; /* Read deassertion time */ + u32 adv_wr_off; /* Write deassertion time */ + u32 adv_aad_mux_on; /* ADV assertion time for AAD */ + u32 adv_aad_mux_rd_off; /* ADV read deassertion time for AAD */ + u32 adv_aad_mux_wr_off; /* ADV write deassertion time for AAD */ + + /* WE signals timings corresponding to GPMC_CONFIG4 */ + u32 we_on; /* WE assertion time */ + u32 we_off; /* WE deassertion time */ + + /* OE signals timings corresponding to GPMC_CONFIG4 */ + u32 oe_on; /* OE assertion time */ + u32 oe_off; /* OE deassertion time */ + u32 oe_aad_mux_on; /* OE assertion time for AAD */ + u32 oe_aad_mux_off; /* OE deassertion time for AAD */ + + /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */ + u32 page_burst_access; /* Multiple access word delay */ + u32 access; /* Start-cycle to first data valid delay */ + u32 rd_cycle; /* Total read cycle time */ + u32 wr_cycle; /* Total write cycle time */ + + u32 bus_turnaround; + u32 cycle2cycle_delay; + + u32 wait_monitoring; + u32 clk_activation; + + /* The following are only on OMAP3430 */ + u32 wr_access; /* WRACCESSTIME */ + u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */ + + struct gpmc_bool_timings bool_timings; +}; + +/* Device timings in picoseconds */ +struct gpmc_device_timings { + u32 t_ceasu; /* address setup to CS valid */ + u32 t_avdasu; /* address setup to ADV valid */ + /* XXX: try to combine t_avdp_r & t_avdp_w. Issue is + * of tusb using these timings even for sync whilst + * ideally for adv_rd/(wr)_off it should have considered + * t_avdh instead. This indirectly necessitates r/w + * variations of t_avdp as it is possible to have one + * sync & other async + */ + u32 t_avdp_r; /* ADV low time (what about t_cer ?) */ + u32 t_avdp_w; + u32 t_aavdh; /* address hold time */ + u32 t_oeasu; /* address setup to OE valid */ + u32 t_aa; /* access time from ADV assertion */ + u32 t_iaa; /* initial access time */ + u32 t_oe; /* access time from OE assertion */ + u32 t_ce; /* access time from CS asertion */ + u32 t_rd_cycle; /* read cycle time */ + u32 t_cez_r; /* read CS deassertion to high Z */ + u32 t_cez_w; /* write CS deassertion to high Z */ + u32 t_oez; /* OE deassertion to high Z */ + u32 t_weasu; /* address setup to WE valid */ + u32 t_wpl; /* write assertion time */ + u32 t_wph; /* write deassertion time */ + u32 t_wr_cycle; /* write cycle time */ + + u32 clk; + u32 t_bacc; /* burst access valid clock to output delay */ + u32 t_ces; /* CS setup time to clk */ + u32 t_avds; /* ADV setup time to clk */ + u32 t_avdh; /* ADV hold time from clk */ + u32 t_ach; /* address hold time from clk */ + u32 t_rdyo; /* clk to ready valid */ + + u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */ + u32 t_ce_avd; /* CS on to ADV on delay */ + + /* XXX: check the possibility of combining + * cyc_aavhd_oe & cyc_aavdh_we + */ + u8 cyc_aavdh_oe;/* read address hold time in cycles */ + u8 cyc_aavdh_we;/* write address hold time in cycles */ + u8 cyc_oe; /* access time from OE assertion in cycles */ + u8 cyc_wpl; /* write deassertion time in cycles */ + u32 cyc_iaa; /* initial access time in cycles */ + + /* extra delays */ + bool ce_xdelay; + bool avd_xdelay; + bool oe_xdelay; + bool we_xdelay; +}; + +#define GPMC_BURST_4 4 /* 4 word burst */ +#define GPMC_BURST_8 8 /* 8 word burst */ +#define GPMC_BURST_16 16 /* 16 word burst */ +#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */ +#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */ +#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */ +#define GPMC_MUX_AD 2 /* Addr-Data multiplex */ + +struct gpmc_settings { + bool burst_wrap; /* enables wrap bursting */ + bool burst_read; /* enables read page/burst mode */ + bool burst_write; /* enables write page/burst mode */ + bool device_nand; /* device is NAND */ + bool sync_read; /* enables synchronous reads */ + bool sync_write; /* enables synchronous writes */ + bool wait_on_read; /* monitor wait on reads */ + bool wait_on_write; /* monitor wait on writes */ + u32 burst_len; /* page/burst length */ + u32 device_width; /* device bus width (8 or 16 bit) */ + u32 mux_add_data; /* multiplex address & data */ + u32 wait_pin; /* wait-pin to be used */ +}; |