diff options
Diffstat (limited to 'doc/board/nxp/imxrt1170-evk.rst')
| -rw-r--r-- | doc/board/nxp/imxrt1170-evk.rst | 50 |
1 files changed, 50 insertions, 0 deletions
diff --git a/doc/board/nxp/imxrt1170-evk.rst b/doc/board/nxp/imxrt1170-evk.rst new file mode 100644 index 0000000000..86bd39ccb6 --- /dev/null +++ b/doc/board/nxp/imxrt1170-evk.rst @@ -0,0 +1,50 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +imxrt1170-evk +============= + +How to use U-Boot on NXP i.MXRT1170 EVK +--------------------------------------- + +- Build U-Boot for i.MXRT1170 EVK: + + .. code-block:: bash + + $ make mrproper + $ make imxrt1170-evk_defconfig + $ make + + This will generate the SPL image called SPL and the u-boot.img. + +- Flash the SPL image into the micro SD card: + + .. code-block:: bash + + $sudo dd if=SPL of=/dev/sdX bs=1k seek=1 conv=notrunc; sync + + This location is not compatible with GPT partioning. Please, use MBR + partitioning instead. + +- Flash the u-boot.img image into the micro SD card: + + .. code-block:: bash + + $sudo dd if=u-boot.img of=/dev/sdX bs=1k seek=128 conv=notrunc; sync + +- Jumper settings + + .. list-table:: + :stub-columns: 1 + + * - SW1 + - 1 0 1 0 + * - SW2 + - 0 0 0 0 | 0 0 0 0 | 1 0 0 0 + + where 0 means bottom position and 1 means top position (from the + switch label numbers reference). + +- Connect the USB cable between the EVK and the PC for the console. + The USB console connector is the one close the ethernet connector + +- Insert the micro SD card in the board, power it up and U-Boot messages should come up. |