aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/BuR/brppt1/board.c5
-rw-r--r--board/BuR/brxre1/board.c2
-rw-r--r--board/BuR/common/bur_common.h2
-rw-r--r--board/BuR/common/common.c7
-rw-r--r--board/broadcom/bcm963158/Kconfig17
-rw-r--r--board/broadcom/bcm963158/MAINTAINERS6
-rw-r--r--board/broadcom/bcm963158/Makefile3
-rw-r--r--board/broadcom/bcm963158/bcm963158.c61
-rw-r--r--board/broadcom/bcm968580xref/MAINTAINERS4
-rw-r--r--board/samsung/common/board.c52
-rw-r--r--board/samsung/common/exynos5-dt.c29
11 files changed, 103 insertions, 85 deletions
diff --git a/board/BuR/brppt1/board.c b/board/BuR/brppt1/board.c
index d2e7c72242..b8ab19c0e7 100644
--- a/board/BuR/brppt1/board.c
+++ b/board/BuR/brppt1/board.c
@@ -106,9 +106,8 @@ void am33xx_spl_board_init(void)
/* setup I2C */
enable_i2c_pin_mux();
- i2c_set_bus_num(0);
- i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
- pmicsetup(0);
+
+ pmicsetup(0, 0);
/* peripheral reset */
rc = gpio_request(64 + 29, "GPMC_WAIT1");
diff --git a/board/BuR/brxre1/board.c b/board/BuR/brxre1/board.c
index 41ed28b4bc..82c53d5bc2 100644
--- a/board/BuR/brxre1/board.c
+++ b/board/BuR/brxre1/board.c
@@ -132,7 +132,7 @@ void am33xx_spl_board_init(void)
puts("ERROR: i2c_set_bus_speed failed! (turn on PWR_nEN)\n");
}
- pmicsetup(0);
+ pmicsetup(0, 0);
}
const struct dpll_params *get_dpll_ddr_params(void)
diff --git a/board/BuR/common/bur_common.h b/board/BuR/common/bur_common.h
index 5f2d0d055f..f743194c34 100644
--- a/board/BuR/common/bur_common.h
+++ b/board/BuR/common/bur_common.h
@@ -15,7 +15,7 @@
int load_lcdtiming(struct am335x_lcdpanel *panel);
void br_summaryscreen(void);
-void pmicsetup(u32 mpupll);
+void pmicsetup(u32 mpupll, unsigned int bus);
void enable_uart0_pin_mux(void);
void enable_i2c_pin_mux(void);
void enable_board_pin_mux(void);
diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c
index f3eae5cbc1..a1f7c44abf 100644
--- a/board/BuR/common/common.c
+++ b/board/BuR/common/common.c
@@ -269,13 +269,14 @@ int ft_board_setup(void *blob, bd_t *bd)
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-void pmicsetup(u32 mpupll)
+void pmicsetup(u32 mpupll, unsigned int bus)
{
int mpu_vdd;
int usb_cur_lim;
- if (i2c_probe(TPS65217_CHIP_PM)) {
- puts("PMIC (0x24) not found! skip further initalization.\n");
+ if (power_tps65217_init(bus)) {
+ printf("WARN: cannot setup PMIC 0x24 @ bus #%d, not found!.\n",
+ bus);
return;
}
diff --git a/board/broadcom/bcm963158/Kconfig b/board/broadcom/bcm963158/Kconfig
new file mode 100644
index 0000000000..41b6adbb80
--- /dev/null
+++ b/board/broadcom/bcm963158/Kconfig
@@ -0,0 +1,17 @@
+if ARCH_BCM63158
+
+config SYS_VENDOR
+ default "broadcom"
+
+config SYS_BOARD
+ default "bcm963158"
+
+config SYS_CONFIG_NAME
+ default "broadcom_bcm963158"
+
+endif
+
+config TARGET_BCM963158
+ bool "Support Broadcom bcm963158"
+ depends on ARCH_BCM63158
+ select ARM64
diff --git a/board/broadcom/bcm963158/MAINTAINERS b/board/broadcom/bcm963158/MAINTAINERS
new file mode 100644
index 0000000000..d28d971f9d
--- /dev/null
+++ b/board/broadcom/bcm963158/MAINTAINERS
@@ -0,0 +1,6 @@
+BROADCOM BCM963158
+M: Philippe Reynes <philippe.reynes@softathome.com>
+S: Maintained
+F: board/broadcom/bcm963158/
+F: include/configs/broadcom_bcm963158.h
+F: configs/bcm963158_ram_defconfig
diff --git a/board/broadcom/bcm963158/Makefile b/board/broadcom/bcm963158/Makefile
new file mode 100644
index 0000000000..0a902c9cf6
--- /dev/null
+++ b/board/broadcom/bcm963158/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += bcm963158.o
diff --git a/board/broadcom/bcm963158/bcm963158.c b/board/broadcom/bcm963158/bcm963158.c
new file mode 100644
index 0000000000..db82cd570d
--- /dev/null
+++ b/board/broadcom/bcm963158/bcm963158.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Philippe Reynes <philippe.reynes@softathome.com>
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <linux/io.h>
+
+#ifdef CONFIG_ARM64
+#include <asm/armv8/mmu.h>
+
+static struct mm_region broadcom_bcm963158_mem_map[] = {
+ {
+ /* RAM */
+ .virt = 0x00000000UL,
+ .phys = 0x00000000UL,
+ .size = 8UL * SZ_1G,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ /* SoC */
+ .virt = 0x80000000UL,
+ .phys = 0x80000000UL,
+ .size = 0xff80000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+struct mm_region *mem_map = broadcom_bcm963158_mem_map;
+#endif
+
+int board_init(void)
+{
+ return 0;
+}
+
+int dram_init(void)
+{
+ if (fdtdec_setup_mem_size_base() != 0)
+ printf("fdtdec_setup_mem_size_base() has failed\n");
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ fdtdec_setup_memory_banksize();
+
+ return 0;
+}
+
+int print_cpuinfo(void)
+{
+ return 0;
+}
diff --git a/board/broadcom/bcm968580xref/MAINTAINERS b/board/broadcom/bcm968580xref/MAINTAINERS
index 1ecdfbc0bb..5ee0c4dd4e 100644
--- a/board/broadcom/bcm968580xref/MAINTAINERS
+++ b/board/broadcom/bcm968580xref/MAINTAINERS
@@ -1,6 +1,6 @@
-BROADCOM BCM968580XREF
+BCM968580XREF BOARD
M: Philippe Reynes <philippe.reynes@softathome.com>
S: Maintained
F: board/broadcom/bcm968580xref/
F: include/configs/broadcom_bcm968580xref.h
-F: configs/bcm968580_ram_defconfig
+F: configs/bcm968580xref_ram_defconfig
diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c
index 6fd26a3a91..96228a86a1 100644
--- a/board/samsung/common/board.c
+++ b/board/samsung/common/board.c
@@ -249,56 +249,16 @@ int board_eth_init(bd_t *bis)
return 0;
}
-#ifdef CONFIG_MMC
-static int init_mmc(void)
-{
-#ifdef CONFIG_MMC_SDHCI
- return exynos_mmc_init(gd->fdt_blob);
-#else
- return 0;
-#endif
-}
-
-static int init_dwmmc(void)
-{
-#ifdef CONFIG_MMC_DW
- return exynos_dwmmc_init(gd->fdt_blob);
-#else
- return 0;
-#endif
-}
-
-int board_mmc_init(bd_t *bis)
-{
- int ret;
-
- if (get_boot_mode() == BOOT_MODE_SD) {
- ret = init_mmc();
- ret |= init_dwmmc();
- } else {
- ret = init_dwmmc();
- ret |= init_mmc();
- }
-
- if (ret)
- debug("mmc init failed\n");
-
- return ret;
-}
-#endif
-
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
- const char *board_info;
+ if (IS_ENABLED(CONFIG_BOARD_TYPES)) {
+ const char *board_info = get_board_type();
+
+ if (board_info)
+ printf("Type: %s\n", board_info);
+ }
- board_info = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
- printf("Board: %s\n", board_info ? board_info : "unknown");
-#ifdef CONFIG_BOARD_TYPES
- board_info = get_board_type();
- if (board_info)
- printf("Type: %s\n", board_info);
-#endif
return 0;
}
#endif
diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
index c183965b92..87eb381345 100644
--- a/board/samsung/common/exynos5-dt.c
+++ b/board/samsung/common/exynos5-dt.c
@@ -34,37 +34,8 @@
DECLARE_GLOBAL_DATA_PTR;
-static void board_enable_audio_codec(void)
-{
- int node, ret;
- struct gpio_desc en_gpio;
-
- node = fdtdec_next_compatible(gd->fdt_blob, 0,
- COMPAT_SAMSUNG_EXYNOS5_SOUND);
- if (node <= 0)
- return;
-
- ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
- "codec-enable-gpio", 0, &en_gpio,
- GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
- if (ret == -FDT_ERR_NOTFOUND)
- return;
-
- /* Turn on the GPIO which connects to the codec's "enable" line. */
- gpio_set_pull(gpio_get_number(&en_gpio), S5P_GPIO_PULL_NONE);
-
-#ifdef CONFIG_SOUND_MAX98095
- /* Enable MAX98095 Codec */
- gpio_request(EXYNOS5_GPIO_X17, "max98095_enable");
- gpio_direction_output(EXYNOS5_GPIO_X17, 1);
- gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
-#endif
-}
-
int exynos_init(void)
{
- board_enable_audio_codec();
-
return 0;
}
generated by cgit v1.2.3 (git 2.39.1) at 2025-05-31 11:04:09 +0000