1 files changed, 0 insertions, 181 deletions
diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c
deleted file mode 100644
index a061d7d8af..0000000000
--- a/board/seco/mx6quq7/mx6quq7.c
+++ /dev/null
@@ -1,181 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- * Copyright (C) 2015 ECA Sinters
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- * Modified by: Boris Brezillon <boris.brezillon@free-electrons.com>
- */
-
-#include <init.h>
-#include <net.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/iomux.h>
-#include <asm/arch/mx6-pins.h>
-#include <asm/global_data.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <asm/gpio.h>
-#include <asm/mach-imx/iomux-v3.h>
-#include <asm/mach-imx/boot_mode.h>
-#include <malloc.h>
-#include <mmc.h>
-#include <fsl_esdhc_imx.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/arch/mxc_hdmi.h>
-#include <asm/arch/crm_regs.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-#include <asm/io.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/mach-imx/mxc_i2c.h>
-#include <i2c.h>
-
-#include "../common/mx6.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
-
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	seco_mx6_setup_uart_iomux();
-
-	return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
-	seco_mx6_rgmii_rework(phydev);
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-
-	return 0;
-}
-
-int board_eth_init(struct bd_info *bis)
-{
-	uint32_t base = IMX_FEC_BASE;
-	struct mii_dev *bus = NULL;
-	struct phy_device *phydev = NULL;
-	int ret = 0;
-
-	seco_mx6_setup_enet_iomux();
-
-#ifdef CONFIG_FEC_MXC
-	bus = fec_get_miibus(base, -1);
-	if (!bus)
-		return -ENOMEM;
-
-	/* scan phy 4,5,6,7 */
-	phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII);
-	if (!phydev) {
-		free(bus);
-		return -ENOMEM;
-	}
-
-	printf("using phy at %d\n", phydev->addr);
-	ret  = fec_probe(bis, -1, base, bus, phydev);
-	if (ret) {
-		free(phydev);
-		free(bus);
-		printf("FEC MXC: %s:failed\n", __func__);
-	}
-#endif
-
-	return ret;
-}
-
-#define USDHC4_CD_GPIO		IMX_GPIO_NR(2, 6)
-
-static struct fsl_esdhc_cfg usdhc_cfg[2] = {
-	{USDHC3_BASE_ADDR, 0, 4},
-	{USDHC4_BASE_ADDR, 0, 4},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-	int ret = 0;
-
-	switch (cfg->esdhc_base) {
-	case USDHC3_BASE_ADDR:
-		ret = 1; /* Assume eMMC is always present */
-		break;
-	case USDHC4_BASE_ADDR:
-		ret = !gpio_get_value(USDHC4_CD_GPIO);
-		break;
-	}
-
-	return ret;
-}
-
-int board_mmc_init(struct bd_info *bis)
-{
-	u32 index = 0;
-	int ret;
-
-	/*
-	 * Following map is done:
-	 * (U-Boot device node)    (Physical Port)
-	 * mmc0                    eMMC on Board
-	 * mmc1                    Ext SD
-	 */
-	for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
-		switch (index) {
-		case 0:
-			seco_mx6_setup_usdhc_iomux(3);
-			usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-			break;
-		case 1:
-			seco_mx6_setup_usdhc_iomux(4);
-			usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-			break;
-
-		default:
-			printf("Warning: %d exceed maximum number of SD ports %d\n",
-			       index + 1, CONFIG_SYS_FSL_USDHC_NUM);
-			return -EINVAL;
-		}
-
-		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* address of boot parameters */
-	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
-	imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D4__GPIO2_IO04 |
-			       MUX_PAD_CTRL(NO_PAD_CTRL));
-
-	gpio_direction_output(IMX_GPIO_NR(2, 4), 0);
-
-	/* Set Low */
-	gpio_set_value(IMX_GPIO_NR(2, 4), 0);
-	udelay(1000);
-
-	/* Set High */
-	gpio_set_value(IMX_GPIO_NR(2, 4), 1);
-
-	return 0;
-}
-
-int checkboard(void)
-{
-	puts("Board: SECO uQ7\n");
-
-	return 0;
-}