3 files changed, 6 insertions, 2 deletions
diff --git a/board/freescale/m5253demo/flash.c b/board/freescale/m5253demo/flash.c
index 071701d234..099decabb8 100644
--- a/board/freescale/m5253demo/flash.c
+++ b/board/freescale/m5253demo/flash.c
@@ -31,7 +31,7 @@ typedef volatile unsigned short FLASH_PORT_WIDTHV;
 ulong flash_get_size(FPWV * addr, flash_info_t * info);
 int flash_get_offsets(ulong base, flash_info_t * info);
 int write_word(flash_info_t * info, FPWV * dest, u16 data);
-void inline spin_wheel(void);
+static inline void spin_wheel(void);
 
 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
 
@@ -439,7 +439,7 @@ int write_word(flash_info_t * info, FPWV * dest, u16 data)
 	return (res);
 }
 
-void inline spin_wheel(void)
+static inline void spin_wheel(void)
 {
 	static int p = 0;
 	static char w[] = "\\/-";
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index d49543315b..228514b106 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -66,6 +66,7 @@ static iomux_v3_cfg_t const uart1_pads[] = {
 	MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
+#ifdef CONFIG_SPL_BUILD
 static iomux_v3_cfg_t const usdhc1_pads[] = {
 	/* 8 bit SD */
 	MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -106,6 +107,7 @@ static iomux_v3_cfg_t const usdhc3_pads[] = {
 	/*CD pin*/
 	MX6_PAD_REF_CLK_32K__GPIO_3_22 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
+#endif
 
 static iomux_v3_cfg_t const fec_pads[] = {
 	MX6_PAD_FEC_MDC__FEC_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index b28ce10495..a5746fe086 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -225,6 +225,7 @@ static iomux_v3_cfg_t const uart1_pads[] = {
 	MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
+#ifndef CONFIG_SPL_BUILD
 static iomux_v3_cfg_t const usdhc1_pads[] = {
 	MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
 	MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
@@ -240,6 +241,7 @@ static iomux_v3_cfg_t const usdhc1_pads[] = {
 	/* RST_B */
 	MX6_PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
+#endif
 
 /*
  * mx6ul_14x14_evk board default supports sd card. If want to use