diff options
Diffstat (limited to 'arch')
94 files changed, 773 insertions, 4811 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index d35a590f93..6495e780fe 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -451,6 +451,12 @@ source "arch/x86/Kconfig" source "arch/xtensa/Kconfig" source "arch/riscv/Kconfig" +if ARM || M68K || PPC + +source "arch/Kconfig.nxp" + +endif + source "board/keymile/Kconfig" if MIPS || MICROBLAZE diff --git a/arch/Kconfig.nxp b/arch/Kconfig.nxp new file mode 100644 index 0000000000..d3ebbff43b --- /dev/null +++ b/arch/Kconfig.nxp @@ -0,0 +1,241 @@ +config NXP_ESBC + bool "NXP ESBC (secure boot) functionality" + help + Enable Freescale Secure Boot feature. Normally selected by defconfig. + If unsure, do not change. + +menu "Chain of trust / secure boot options" + depends on !FIT_SIGNATURE && NXP_ESBC + +config CHAIN_OF_TRUST + select FSL_CAAM + select ARCH_MISC_INIT + select FSL_SEC_MON + select SPL_BOARD_INIT if (ARM && SPL) + select SPL_HASH if (ARM && SPL) + select SHA_HW_ACCEL + select SHA_PROG_HW_ACCEL + select ENV_IS_NOWHERE + select SYS_CPC_REINIT_F if MPC85xx && !SYS_RAMBOOT + select CMD_EXT4 if ARM + select CMD_EXT4_WRITE if ARM + imply CMD_BLOB + imply CMD_HASH if ARM + def_bool y + +config CMD_ESBC_VALIDATE + bool "Enable the 'esbc_validate' and 'esbc_halt' commands" + default y + help + This option enables two commands used for secure booting: + + esbc_validate - validate signature using RSA verification + esbc_halt - put the core in spin loop (Secure Boot Only) + +config ESBC_HDR_LS + bool + +config ESBC_ADDR_64BIT + def_bool y + depends on ESBC_HDR_LS && FSL_LAYERSCAPE + help + For Layerscape based platforms, ESBC image Address in Header is 64bit. + +config SYS_FSL_SFP_BE + def_bool y + depends on PPC || FSL_LSCH2 || ARCH_LS1021A + +config SYS_FSL_SFP_LE + def_bool y + depends on !SYS_FSL_SFP_BE + +choice + prompt "SFP IP revision" + default SYS_FSL_SFP_VER_3_0 if PPC + default SYS_FSL_SFP_VER_3_4 + +config SYS_FSL_SFP_VER_3_0 + bool "SFP version 3.0" + +config SYS_FSL_SFP_VER_3_2 + bool "SFP version 3.2" + +config SYS_FSL_SFP_VER_3_4 + bool "SFP version 3.4" + +endchoice + +config SPL_UBOOT_KEY_HASH + string "Non-SRK key hash for U-Boot public/private key pair" + depends on SPL + default "" + help + Set the key hash for U-Boot here if public/private key pair used to + sign U-boot are different from the SRK hash put in the fuse. Example + of a key hash is + 41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b. + Otherwise leave this empty. + +if PPC + +config BOOTSCRIPT_COPY_RAM + bool "Secure boot copies boot script to RAM" + help + On systems that support chain of trust booting, a number of addresses + are required to set variables that are used in the copying and then + verification of different parts of the system. If enabled, the subsequent + options are for what location to use in each step. + +config BS_ADDR_DEVICE + hex "Address in RAM for bs_device" + depends on BOOTSCRIPT_COPY_RAM + +config BS_SIZE + hex "The size of bs_size which is the amount read from bs_device" + depends on BOOTSCRIPT_COPY_RAM + +config BS_ADDR_RAM + hex "Address in RAM for bs_ram" + depends on BOOTSCRIPT_COPY_RAM + +config BS_HDR_ADDR_DEVICE + hex "Address in RAM for bs_hdr_device" + depends on BOOTSCRIPT_COPY_RAM + +config BS_HDR_SIZE + hex "The size of bs_hdr_size which is the amount read from bs_hdr_device" + depends on BOOTSCRIPT_COPY_RAM + +config BS_HDR_ADDR_RAM + hex "Address in RAM for bs_hdr_ram" + depends on BOOTSCRIPT_COPY_RAM + +config BOOTSCRIPT_HDR_ADDR + hex "CONFIG_BOOTSCRIPT_HDR_ADDR" + default BS_ADDR_RAM if BOOTSCRIPT_COPY_RAM + +endif + +config SYS_FSL_SRK_LE + def_bool y + depends on ARM + +config KEY_REVOCATION + def_bool y + +endmenu + +comment "Other functionality shared between NXP SoCs" + +config DEEP_SLEEP + bool "Enable SoC deep sleep feature" + depends on ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || ARCH_LS1021A + default y + help + Indicates this SoC supports deep sleep feature. If deep sleep is + supported, core will start to execute uboot when wakes up. + +config LAYERSCAPE_NS_ACCESS + bool "Layerscape non-secure access support" + depends on ARCH_LS1021A || FSL_LSCH2 + +config PCIE1 + bool "PCIe controller #1" + depends on LAYERSCAPE_NS_ACCESS || PPC + +config PCIE2 + bool "PCIe controller #2" + depends on LAYERSCAPE_NS_ACCESS || PPC + +config PCIE3 + bool "PCIe controller #3" + depends on LAYERSCAPE_NS_ACCESS || PPC + +config PCIE4 + bool "PCIe controller #4" + depends on LAYERSCAPE_NS_ACCESS || PPC + +config FSL_USE_PCA9547_MUX + bool "Enable PCA9547 I2C Mux on Freescale boards" + depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 + help + This option enables the PCA9547 I2C mux on Freescale boards. + +config VID + bool "Enable Freescale VID" + depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (I2C || DM_I2C) + help + This option enables setting core voltage based on individual + values saved in SoC fuses. + +config SPL_VID + bool "Enable Freescale VID in SPL" + depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (SPL_I2C || DM_SPL_I2C) + help + This option enables setting core voltage based on individual + values saved in SoC fuses, in SPL. + +if VID || SPL_VID + +config VID_FLS_ENV + string "Environment variable for overriding VDD" + help + This option allows for specifying the environment variable + to check to override VDD information. + +config VOL_MONITOR_INA220 + bool "Enable the INA220 voltage monitor read" + help + This option enables INA220 voltage monitor read + functionality. It is used by the common VID driver. + +config VOL_MONITOR_IR36021_READ + bool "Enable the IR36021 voltage monitor read" + help + This option enables IR36021 voltage monitor read + functionality. It is used by the common VID driver. + +config VOL_MONITOR_IR36021_SET + bool "Enable the IR36021 voltage monitor set" + help + This option enables IR36021 voltage monitor set + functionality. It is used by the common VID driver. + +config VOL_MONITOR_LTC3882_READ + bool "Enable the LTC3882 voltage monitor read" + help + This option enables LTC3882 voltage monitor read + functionality. It is used by the common VID driver. + +config VOL_MONITOR_LTC3882_SET + bool "Enable the LTC3882 voltage monitor set" + help + This option enables LTC3882 voltage monitor set + functionality. It is used by the common VID driver. + +config VOL_MONITOR_ISL68233_READ + bool "Enable the ISL68233 voltage monitor read" + help + This option enables ISL68233 voltage monitor read + functionality. It is used by the common VID driver. + +config VOL_MONITOR_ISL68233_SET + bool "Enable the ISL68233 voltage monitor set" + help + This option enables ISL68233 voltage monitor set + functionality. It is used by the common VID driver. + +endif + +config FSL_QIXIS + bool "Enable QIXIS support" + depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 + +config QIXIS_I2C_ACCESS + bool "Access to QIXIS is over i2c" + depends on FSL_QIXIS + default y + +config HAS_FSL_DR_USB + def_bool y + depends on USB_EHCI_HCD && PPC diff --git a/arch/arc/include/asm/config.h b/arch/arc/include/asm/config.h index 46e94be141..afdfcaa78b 100644 --- a/arch/arc/include/asm/config.h +++ b/arch/arc/include/asm/config.h @@ -6,6 +6,4 @@ #ifndef __ASM_ARC_CONFIG_H_ #define __ASM_ARC_CONFIG_H_ -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #endif /*__ASM_ARC_CONFIG_H_ */ diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dab785efad..434c5e98fa 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -330,15 +330,6 @@ config CPU_V7R select SYS_ARM_MPU select SYS_CACHE_SHIFT_6 -config CPU_PXA - bool - select SYS_CACHE_SHIFT_5 - imply SYS_ARM_MMU - -config CPU_PXA27X - bool - select CPU_PXA - config CPU_SA1100 bool select SYS_CACHE_SHIFT_5 @@ -354,7 +345,6 @@ config SYS_CPU default "armv7" if CPU_V7A default "armv7" if CPU_V7R default "armv7m" if CPU_V7M - default "pxa" if CPU_PXA default "sa1100" if CPU_SA1100 default "armv8" if ARM64 @@ -369,14 +359,12 @@ config SYS_ARM_ARCH default 7 if CPU_V7A default 7 if CPU_V7M default 7 if CPU_V7R - default 5 if CPU_PXA default 4 if CPU_SA1100 default 8 if ARM64 choice prompt "Select the ARM data write cache policy" - default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || \ - CPU_PXA || RZA1 + default SYS_ARM_CACHE_WRITETHROUGH if TARGET_BCMCYGNUS || RZA1 default SYS_ARM_CACHE_WRITEBACK config SYS_ARM_CACHE_WRITEBACK @@ -609,6 +597,9 @@ config ARM64_SUPPORT_AARCH32 help This ARM64 system supports AArch32 execution state. +config S5P + def_bool y if ARCH_EXYNOS || ARCH_S5PC1XX + choice prompt "Target select" default TARGET_HIKEY @@ -996,11 +987,6 @@ config ARCH_MX6 imply SYS_THUMB_BUILD imply SPL_SEPARATE_BSS -if ARCH_MX6 -config SPL_LDSCRIPT - default "arch/arm/mach-omap2/u-boot-spl.lds" -endif - config ARCH_MX5 bool "Freescale MX5" select BOARD_EARLY_INIT_F @@ -1121,7 +1107,6 @@ config ARCH_SOCFPGA select SPL_DM_SERIAL select SPL_LIBCOMMON_SUPPORT select SPL_LIBGENERIC_SUPPORT - select SPL_NAND_SUPPORT if SPL_NAND_DENALI select SPL_OF_CONTROL select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64 select SPL_SERIAL @@ -2354,6 +2339,7 @@ source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" source "board/kontron/sl28/Kconfig" source "board/myir/mys_6ulx/Kconfig" +source "board/siemens/common/Kconfig" source "board/seeed/npi_imx6ull/Kconfig" source "board/socionext/developerbox/Kconfig" source "board/st/stv0991/Kconfig" @@ -2368,8 +2354,3 @@ source "board/xen/xenguest_arm64/Kconfig" source "arch/arm/Kconfig.debug" endmenu - -config SPL_LDSCRIPT - default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if (ARCH_MX23 || ARCH_MX28) && !SPL_FRAMEWORK - default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136 - default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 64c58f4c4a..09fc318878 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -11,7 +11,6 @@ arch-$(CONFIG_CPU_ARM920T) =-march=armv4t arch-$(CONFIG_CPU_ARM926EJS) =-march=armv5te arch-$(CONFIG_CPU_ARM946ES) =-march=armv5te arch-$(CONFIG_CPU_SA1100) =-march=armv4 -arch-$(CONFIG_CPU_PXA) = arch-$(CONFIG_CPU_ARM1136) =-march=armv5t arch-$(CONFIG_CPU_ARM1176) =-march=armv5t arch-$(CONFIG_CPU_V7A) =$(call cc-option, -march=armv7-a, \ @@ -41,7 +40,6 @@ tune-$(CONFIG_CPU_ARM920T) = tune-$(CONFIG_CPU_ARM926EJS) = tune-$(CONFIG_CPU_ARM946ES) = tune-$(CONFIG_CPU_SA1100) =-mtune=strongarm1100 -tune-$(CONFIG_CPU_PXA) =-mcpu=xscale tune-$(CONFIG_CPU_ARM1136) = tune-$(CONFIG_CPU_ARM1176) = tune-$(CONFIG_CPU_V7A) =-mtune=generic-armv7-a diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig index c496e64391..a901360fa7 100644 --- a/arch/arm/cpu/armv7/ls102xa/Kconfig +++ b/arch/arm/cpu/armv7/ls102xa/Kconfig @@ -41,12 +41,6 @@ config MAX_CPUS cores, count the reserved ports. This will allocate enough memory in spin table to properly handle all cores. -config NXP_ESBC - bool "NXP_ESBC" - help - Enable Freescale Secure Boot feature. Normally selected - by defconfig. If unsure, do not change. - config SYS_CCI400_OFFSET hex "Offset for CCI400 base" depends on SYS_FSL_HAS_CCI400 diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile index bfe02389cd..0985420fe5 100644 --- a/arch/arm/cpu/armv7/s5p-common/Makefile +++ b/arch/arm/cpu/armv7/s5p-common/Makefile @@ -3,14 +3,13 @@ # Copyright (C) 2009 Samsung Electronics # Minkyu Kang <mk7.kang@samsung.com> +obj-$(CONFIG_PWM_S5P) += pwm.o ifdef CONFIG_ARCH_NEXELL -obj-$(CONFIG_PWM_NX) += pwm.o obj-$(CONFIG_S5P4418_ONEWIRE) += pwm.o else obj-y += cpu_info.o ifndef CONFIG_SPL_BUILD obj-y += timer.o obj-y += sromc.o -obj-$(CONFIG_PWM) += pwm.o endif endif diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 72d12b4e07..1305238c9d 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -76,6 +76,7 @@ config ARMV8_SEC_FIRMWARE_SUPPORT config SPL_ARMV8_SEC_FIRMWARE_SUPPORT bool "Enable ARMv8 secure monitor firmware framework support for SPL" + depends on SPL select SPL_FIT select SPL_OF_LIBFDT help @@ -83,6 +84,7 @@ config SPL_ARMV8_SEC_FIRMWARE_SUPPORT config SPL_RECOVER_DATA_SECTION bool "save/restore SPL data section" + depends on SPL help Say Y here to save SPL data section for cold boot, and restore at warm boot in SPL phase. diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 80a1642447..602b624dca 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -26,6 +26,7 @@ config ARCH_LS1012A config ARCH_LS1028A bool select ARMV8_SET_SMPEN + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_LAYERSCAPE select FSL_LSCH3 select GICV3 @@ -138,6 +139,7 @@ config ARCH_LS1088A bool select ARMV8_SET_SMPEN select ARM_ERRATA_855873 if !TFABOOT + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_IFC select FSL_LAYERSCAPE select FSL_LSCH3 @@ -187,6 +189,7 @@ config ARCH_LS2080A select ARM_ERRATA_828024 select ARM_ERRATA_829520 select ARM_ERRATA_833471 + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_IFC select FSL_LAYERSCAPE select FSL_LSCH3 @@ -239,6 +242,7 @@ config ARCH_LS2080A config ARCH_LX2162A bool select ARMV8_SET_SMPEN + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_DDR_BIST select FSL_DDR_INTERACTIVE select FSL_LAYERSCAPE @@ -277,6 +281,7 @@ config ARCH_LX2162A config ARCH_LX2160A bool select ARMV8_SET_SMPEN + select ESBC_HDR_LS if CHAIN_OF_TRUST select FSL_DDR_BIST select FSL_DDR_INTERACTIVE select FSL_LAYERSCAPE @@ -456,11 +461,6 @@ config EMC2305 Enable the EMC2305 fan controller for configuration of fan speed. -config NXP_ESBC - bool "NXP_ESBC" - help - Enable Freescale Secure Boot feature - config QSPI_AHB_INIT bool "Init the QSPI AHB bus" help @@ -511,6 +511,11 @@ config DP_DDR_CTRL depends on SYS_FSL_HAS_DP_DDR default 2 if ARCH_LS2080A +config DP_DDR_DIMM_SLOTS_PER_CTLR + int + depends on SYS_FSL_HAS_DP_DDR + default 1 if ARCH_LS2080A + config DP_DDR_NUM_CTRLS int depends on SYS_FSL_HAS_DP_DDR @@ -701,9 +706,6 @@ config SYS_FSL_HAS_RGMII bool depends on SYS_FSL_EC1 || SYS_FSL_EC2 -config SPL_LDSCRIPT - default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARCH_LS1043A || ARCH_LS1046A || ARCH_LS2080A - config HAS_FSL_XHCI_USB bool help diff --git a/arch/arm/cpu/pxa/Makefile b/arch/arm/cpu/pxa/Makefile deleted file mode 100644 index fab77325c7..0000000000 --- a/arch/arm/cpu/pxa/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -extra-y = start.o - -obj-$(CONFIG_CPU_PXA27X) += pxa2xx.o - -obj-y += cpuinfo.o -obj-y += timer.o -obj-y += usb.o -obj-y += relocate.o -obj-y += cache.o diff --git a/arch/arm/cpu/pxa/cache.c b/arch/arm/cpu/pxa/cache.c deleted file mode 100644 index a2ec5e28c7..0000000000 --- a/arch/arm/cpu/pxa/cache.c +++ /dev/null @@ -1,58 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2016 Vasily Khoruzhick <anarsoul@gmail.com> - */ - -#include <cpu_func.h> -#include <asm/cache.h> -#include <linux/types.h> -#include <common.h> - -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) -void invalidate_dcache_all(void) -{ - /* Flush/Invalidate I cache */ - asm volatile("mcr p15, 0, %0, c7, c5, 0\n" : : "r"(0)); - /* Flush/Invalidate D cache */ - asm volatile("mcr p15, 0, %0, c7, c6, 0\n" : : "r"(0)); -} - -void flush_dcache_all(void) -{ - return invalidate_dcache_all(); -} - -void invalidate_dcache_range(unsigned long start, unsigned long stop) -{ - start &= ~(CONFIG_SYS_CACHELINE_SIZE - 1); - stop &= ~(CONFIG_SYS_CACHELINE_SIZE - 1); - - while (start <= stop) { - asm volatile("mcr p15, 0, %0, c7, c6, 1\n" : : "r"(start)); - start += CONFIG_SYS_CACHELINE_SIZE; - } -} - -void flush_dcache_range(unsigned long start, unsigned long stop) -{ - return invalidate_dcache_range(start, stop); -} -#else /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */ -void invalidate_dcache_all(void) -{ -} - -void flush_dcache_all(void) -{ -} -#endif /* #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) */ - -/* - * Stub implementations for l2 cache operations - */ - -__weak void l2_cache_disable(void) {} - -#if CONFIG_IS_ENABLED(SYS_THUMB_BUILD) -__weak void invalidate_l2_cache(void) {} -#endif diff --git a/arch/arm/cpu/pxa/config.mk b/arch/arm/cpu/pxa/config.mk deleted file mode 100644 index e7b183674a..0000000000 --- a/arch/arm/cpu/pxa/config.mk +++ /dev/null @@ -1,18 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> - -# -# !WARNING! -# The PXA's OneNAND SPL uses .text.0 and .text.1 segments to allow booting from -# really small OneNAND memories where the mmap'd window is only 1KiB big. The -# .text.0 contains only the bare minimum needed to load the real SPL into SRAM. -# Add .text.0 and .text.1 into OBJFLAGS, so when the SPL is being objcopy'd, -# they are not discarded. -# - -#ifdef CONFIG_SPL_BUILD -OBJCOPYFLAGS += -j .text.0 -j .text.1 -#endif diff --git a/arch/arm/cpu/pxa/cpuinfo.c b/arch/arm/cpu/pxa/cpuinfo.c deleted file mode 100644 index 549b61d6e0..0000000000 --- a/arch/arm/cpu/pxa/cpuinfo.c +++ /dev/null @@ -1,139 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * PXA CPU information display - * - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - */ - -#include <common.h> -#include <init.h> -#include <asm/io.h> -#include <errno.h> -#include <linux/compiler.h> - -#define CPU_MASK_PXA_PRODID 0x000003f0 -#define CPU_MASK_PXA_REVID 0x0000000f - -#define CPU_MASK_PRODREV (CPU_MASK_PXA_PRODID | CPU_MASK_PXA_REVID) - -#define CPU_VALUE_PXA25X 0x100 -#define CPU_VALUE_PXA27X 0x110 - -static uint32_t pxa_get_cpuid(void) -{ - uint32_t cpuid; - asm volatile("mrc p15, 0, %0, c0, c0, 0" : "=r"(cpuid)); - return cpuid; -} - -int cpu_is_pxa25x(void) -{ - uint32_t id = pxa_get_cpuid(); - id &= CPU_MASK_PXA_PRODID; - return id == CPU_VALUE_PXA25X; -} - -int cpu_is_pxa27x(void) -{ - uint32_t id = pxa_get_cpuid(); - id &= CPU_MASK_PXA_PRODID; - return id == CPU_VALUE_PXA27X; -} - -int cpu_is_pxa27xm(void) -{ - uint32_t id = pxa_get_cpuid(); - return ((id & CPU_MASK_PXA_PRODID) == CPU_VALUE_PXA27X) && - ((id & CPU_MASK_PXA_REVID) == 8); -} - -uint32_t pxa_get_cpu_revision(void) -{ - return pxa_get_cpuid() & CPU_MASK_PRODREV; -} - -#ifdef CONFIG_DISPLAY_CPUINFO -static const char *pxa25x_get_revision(void) -{ - static __maybe_unused const char * const revs_25x[] = { "A0" }; - static __maybe_unused const char * const revs_26x[] = { - "A0", "B0", "B1" - }; - static const char *unknown = "Unknown"; - uint32_t id; - - if (!cpu_is_pxa25x()) - return unknown; - - id = pxa_get_cpuid() & CPU_MASK_PXA_REVID; - -/* PXA26x is a sick special case as it can't be told apart from PXA25x :-( */ -#ifdef CONFIG_CPU_PXA26X - switch (id) { - case 3: return revs_26x[0]; - case 5: return revs_26x[1]; - case 6: return revs_26x[2]; - } -#else - if (id == 6) - return revs_25x[0]; -#endif - return unknown; -} - -static const char *pxa27x_get_revision(void) -{ - static const char *const rev[] = { "A0", "A1", "B0", "B1", "C0", "C5" }; - static const char *unknown = "Unknown"; - uint32_t id; - - if (!cpu_is_pxa27x()) - return unknown; - - id = pxa_get_cpuid() & CPU_MASK_PXA_REVID; - - if ((id == 5) || (id == 6) || (id > 8)) - return unknown; - - /* Cap the special PXA270 C5 case. */ - if (id == 7) - id = 5; - - /* Cap the special PXA270M A1 case. */ - if (id == 8) - id = 1; - - return rev[id]; -} - -static int print_cpuinfo_pxa2xx(void) -{ - if (cpu_is_pxa25x()) { - puts("Marvell PXA25x rev. "); - puts(pxa25x_get_revision()); - } else if (cpu_is_pxa27x()) { - puts("Marvell PXA27x"); - if (cpu_is_pxa27xm()) puts("M"); - puts(" rev. "); - puts(pxa27x_get_revision()); - } else - return -EINVAL; - - puts("\n"); - - return 0; -} - -int print_cpuinfo(void) -{ - int ret; - - puts("CPU: "); - - ret = print_cpuinfo_pxa2xx(); - if (!ret) - return ret; - - return ret; -} -#endif diff --git a/arch/arm/cpu/pxa/pxa2xx.c b/arch/arm/cpu/pxa/pxa2xx.c deleted file mode 100644 index c7efb67754..0000000000 --- a/arch/arm/cpu/pxa/pxa2xx.c +++ /dev/null @@ -1,295 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Alex Zuepke <azu@sysgo.de> - */ - -#include <common.h> -#include <cpu_func.h> -#include <init.h> -#include <irq_func.h> -#include <asm/arch/pxa-regs.h> -#include <asm/cache.h> -#include <asm/io.h> -#include <asm/system.h> -#include <command.h> - -/* Flush I/D-cache */ -static void cache_flush(void) -{ - unsigned long i = 0; - - asm ("mcr p15, 0, %0, c7, c5, 0" : : "r" (i)); -} - -int cleanup_before_linux(void) -{ - /* - * This function is called just before we call Linux. It prepares - * the processor for Linux by just disabling everything that can - * disturb booting Linux. - */ - - disable_interrupts(); - icache_disable(); - dcache_disable(); - cache_flush(); - - return 0; -} - -inline void writelrb(uint32_t val, uint32_t addr) -{ - writel(val, addr); - asm volatile("" : : : "memory"); - readl(addr); - asm volatile("" : : : "memory"); -} - -void pxa2xx_dram_init(void) -{ - uint32_t tmp; - int i; - /* - * 1) Initialize Asynchronous static memory controller - */ - - writelrb(CONFIG_SYS_MSC0_VAL, MSC0); - writelrb(CONFIG_SYS_MSC1_VAL, MSC1); - writelrb(CONFIG_SYS_MSC2_VAL, MSC2); - /* - * 2) Initialize Card Interface - */ - - /* MECR: Memory Expansion Card Register */ - writelrb(CONFIG_SYS_MECR_VAL, MECR); - /* MCMEM0: Card Interface slot 0 timing */ - writelrb(CONFIG_SYS_MCMEM0_VAL, MCMEM0); - /* MCMEM1: Card Interface slot 1 timing */ - writelrb(CONFIG_SYS_MCMEM1_VAL, MCMEM1); - /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - writelrb(CONFIG_SYS_MCATT0_VAL, MCATT0); - /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - writelrb(CONFIG_SYS_MCATT1_VAL, MCATT1); - /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - writelrb(CONFIG_SYS_MCIO0_VAL, MCIO0); - /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - writelrb(CONFIG_SYS_MCIO1_VAL, MCIO1); - - /* - * 3) Configure Fly-By DMA register - */ - - writelrb(CONFIG_SYS_FLYCNFG_VAL, FLYCNFG); - - /* - * 4) Initialize Timing for Sync Memory (SDCLK0) - */ - - /* - * Before accessing MDREFR we need a valid DRI field, so we set - * this to power on defaults + DRI field. - */ - - /* Read current MDREFR config and zero out DRI */ - tmp = readl(MDREFR) & ~0xfff; - /* Add user-specified DRI */ - tmp |= CONFIG_SYS_MDREFR_VAL & 0xfff; - /* Configure important bits */ - tmp |= MDREFR_K0RUN | MDREFR_SLFRSH; - tmp &= ~(MDREFR_APD | MDREFR_E1PIN); - - /* Write MDREFR back */ - writelrb(tmp, MDREFR); - - /* - * 5) Initialize Synchronous Static Memory (Flash/Peripherals) - */ - - /* Initialize SXCNFG register. Assert the enable bits. - * - * Write SXMRS to cause an MRS command to all enabled banks of - * synchronous static memory. Note that SXLCR need not be written - * at this time. - */ - writelrb(CONFIG_SYS_SXCNFG_VAL, SXCNFG); - - /* - * 6) Initialize SDRAM - */ - - writelrb(CONFIG_SYS_MDREFR_VAL & ~MDREFR_SLFRSH, MDREFR); - writelrb(CONFIG_SYS_MDREFR_VAL | MDREFR_E1PIN, MDREFR); - - /* - * 7) Write MDCNFG with MDCNFG:DEx deasserted (set to 0), to configure - * but not enable each SDRAM partition pair. - */ - - writelrb(CONFIG_SYS_MDCNFG_VAL & - ~(MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3), MDCNFG); - - /* Wait for the clock to the SDRAMs to stabilize, 100..200 usec. */ - writel(0, OSCR); - while (readl(OSCR) < 0x300) - asm volatile("" : : : "memory"); - - /* - * 8) Trigger a number (usually 8) refresh cycles by attempting - * non-burst read or write accesses to disabled SDRAM, as commonly - * specified in the power up sequence documented in SDRAM data - * sheets. The address(es) used for this purpose must not be - * cacheable. - */ - for (i = 9; i >= 0; i--) { - writel(i, 0xa0000000); - asm volatile("" : : : "memory"); - } - /* - * 9) Write MDCNFG with enable bits asserted (MDCNFG:DEx set to 1). - */ - - tmp = CONFIG_SYS_MDCNFG_VAL & - (MDCNFG_DE0 | MDCNFG_DE1 | MDCNFG_DE2 | MDCNFG_DE3); - tmp |= readl(MDCNFG); - writelrb(tmp, MDCNFG); - - /* - * 10) Write MDMRS. - */ - - writelrb(CONFIG_SYS_MDMRS_VAL, MDMRS); - - /* - * 11) Enable APD - */ - - if (CONFIG_SYS_MDREFR_VAL & MDREFR_APD) { - tmp = readl(MDREFR); - tmp |= MDREFR_APD; - writelrb(tmp, MDREFR); - } -} - -void pxa_gpio_setup(void) -{ - writel(CONFIG_SYS_GPSR0_VAL, GPSR0); - writel(CONFIG_SYS_GPSR1_VAL, GPSR1); - writel(CONFIG_SYS_GPSR2_VAL, GPSR2); -#if defined(CONFIG_CPU_PXA27X) - writel(CONFIG_SYS_GPSR3_VAL, GPSR3); -#endif - - writel(CONFIG_SYS_GPCR0_VAL, GPCR0); - writel(CONFIG_SYS_GPCR1_VAL, GPCR1); - writel(CONFIG_SYS_GPCR2_VAL, GPCR2); -#if defined(CONFIG_CPU_PXA27X) - writel(CONFIG_SYS_GPCR3_VAL, GPCR3); -#endif - - writel(CONFIG_SYS_GPDR0_VAL, GPDR0); - writel(CONFIG_SYS_GPDR1_VAL, GPDR1); - writel(CONFIG_SYS_GPDR2_VAL, GPDR2); -#if defined(CONFIG_CPU_PXA27X) - writel(CONFIG_SYS_GPDR3_VAL, GPDR3); -#endif - - writel(CONFIG_SYS_GAFR0_L_VAL, GAFR0_L); - writel(CONFIG_SYS_GAFR0_U_VAL, GAFR0_U); - writel(CONFIG_SYS_GAFR1_L_VAL, GAFR1_L); - writel(CONFIG_SYS_GAFR1_U_VAL, GAFR1_U); - writel(CONFIG_SYS_GAFR2_L_VAL, GAFR2_L); - writel(CONFIG_SYS_GAFR2_U_VAL, GAFR2_U); -#if defined(CONFIG_CPU_PXA27X) - writel(CONFIG_SYS_GAFR3_L_VAL, GAFR3_L); - writel(CONFIG_SYS_GAFR3_U_VAL, GAFR3_U); -#endif - - writel(CONFIG_SYS_PSSR_VAL, PSSR); -} - -void pxa_interrupt_setup(void) -{ - writel(0, ICLR); - writel(0, ICMR); -#if defined(CONFIG_CPU_PXA27X) - writel(0, ICLR2); - writel(0, ICMR2); -#endif -} - -void pxa_clock_setup(void) -{ - writel(CONFIG_SYS_CKEN, CKEN); - writel(CONFIG_SYS_CCCR, CCCR); - asm volatile("mcr p14, 0, %0, c6, c0, 0" : : "r"(0x0b)); - - /* enable the 32Khz oscillator for RTC and PowerManager */ - writel(OSCC_OON, OSCC); - while (!(readl(OSCC) & OSCC_OOK)) - asm volatile("" : : : "memory"); -} - -void pxa_wakeup(void) -{ - uint32_t rcsr; - - rcsr = readl(RCSR); - writel(rcsr & (RCSR_GPR | RCSR_SMR | RCSR_WDR | RCSR_HWR), RCSR); - - /* Wakeup */ - if (rcsr & RCSR_SMR) { - writel(PSSR_PH, PSSR); - pxa2xx_dram_init(); - icache_disable(); - dcache_disable(); - asm volatile("mov pc, %0" : : "r"(readl(PSPR))); - } -} - -int arch_cpu_init(void) -{ - pxa_gpio_setup(); - pxa_wakeup(); - pxa_interrupt_setup(); - pxa_clock_setup(); - return 0; -} - -void i2c_clk_enable(void) -{ - /* Set the global I2C clock on */ - writel(readl(CKEN) | CKEN14_I2C, CKEN); -} - -void __attribute__((weak)) reset_cpu(void) __attribute__((noreturn)); - -void reset_cpu(void) -{ - uint32_t tmp; - - setbits_le32(OWER, OWER_WME); - - tmp = readl(OSCR); - tmp += 0x1000; - writel(tmp, OSMR3); - writel(MDREFR_SLFRSH, MDREFR); - - for (;;) - ; -} - -void enable_caches(void) -{ -#if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF) - icache_enable(); -#endif -#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) - dcache_enable(); -#endif -} diff --git a/arch/arm/cpu/pxa/relocate.S b/arch/arm/cpu/pxa/relocate.S deleted file mode 100644 index 778cd45e9c..0000000000 --- a/arch/arm/cpu/pxa/relocate.S +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * relocate - PXA270 vector relocation - * - * Copyright (c) 2013 Albert ARIBAUD <albert.u.boot@aribaud.net> - */ - -#include <linux/linkage.h> - -/* - * The PXA SoC is very specific with respect to exceptions: it - * does not provide RAM at the high vectors address (0xFFFF0000), - * thus only the low address (0x00000000) is useable; but that is - * in ROM, so let's avoid relocating the vectors. - */ - .section .text.relocate_vectors,"ax",%progbits - -ENTRY(relocate_vectors) - - bx lr - -ENDPROC(relocate_vectors) diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S deleted file mode 100644 index ab7bcb4e56..0000000000 --- a/arch/arm/cpu/pxa/start.S +++ /dev/null @@ -1,98 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * armboot - Startup Code for XScale CPU-core - * - * Copyright (C) 1998 Dan Malek <dmalek@jlc.net> - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2000 Wolfgang Denk <wd@denx.de> - * Copyright (C) 2001 Alex Zuepke <azu@sysgo.de> - * Copyright (C) 2001 Marius Groger <mag@sysgo.de> - * Copyright (C) 2002 Alex Zupke <azu@sysgo.de> - * Copyright (C) 2002 Gary Jennejohn <garyj@denx.de> - * Copyright (C) 2002 Kyle Harris <kharris@nexus-tech.net> - * Copyright (C) 2003 Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de> - * Copyright (C) 2003 Kshitij <kshitij@ti.com> - * Copyright (C) 2003 Richard Woodruff <r-woodruff2@ti.com> - * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de> - * Copyright (C) 2004 Texas Instruments <r-woodruff2@ti.com> - * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> - */ - -#include <asm-offsets.h> -#include <config.h> - -/* - ************************************************************************* - * - * Startup Code (reset vector) - * - * do important init only if we don't start from memory! - * setup Memory and board specific bits prior to relocation. - * relocate armboot to ram - * setup stack - * - ************************************************************************* - */ - - .globl reset - -reset: - /* - * set the cpu to SVC32 mode - */ - mrs r0,cpsr - bic r0,r0,#0x1f - orr r0,r0,#0xd3 - msr cpsr,r0 - -#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) - bl cpu_init_crit -#endif - -#ifdef CONFIG_CPU_PXA27X - /* - * enable clock for SRAM - */ - ldr r0,=CKEN - ldr r1,[r0] - orr r1,r1,#(1 << 20) - str r1,[r0] -#endif - bl _main - -/*------------------------------------------------------------------------------*/ - - .globl c_runtime_cpu_setup -c_runtime_cpu_setup: - bx lr - -/* - ************************************************************************* - * - * CPU_init_critical registers - * - * setup important registers - * setup memory timing - * - ************************************************************************* - */ -#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) -cpu_init_crit: - /* - * flush v4 I/D caches - */ - mov r0, #0 - mcr p15, 0, r0, c7, c7, 0 /* Invalidate I+D+BTB caches */ - mcr p15, 0, r0, c8, c7, 0 /* Invalidate Unified TLB */ - - /* - * disable MMU stuff and caches - */ - mrc p15, 0, r0, c1, c0, 0 - bic r0, r0, #0x00003300 @ clear bits 13:12, 9:8 (--VI --RS) - bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) - orr r0, r0, #0x00000002 @ set bit 1 (A) Align - mcr p15, 0, r0, c1, c0, 0 - - mov pc, lr /* back to my caller */ -#endif /* !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT) */ diff --git a/arch/arm/cpu/pxa/timer.c b/arch/arm/cpu/pxa/timer.c deleted file mode 100644 index 8e9d610441..0000000000 --- a/arch/arm/cpu/pxa/timer.c +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Marvell PXA2xx/3xx timer driver - * - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - */ - -#include <common.h> -#include <init.h> -#include <asm/io.h> - -int timer_init(void) -{ - writel(0, CONFIG_SYS_TIMER_COUNTER); - return 0; -} diff --git a/arch/arm/cpu/pxa/usb.c b/arch/arm/cpu/pxa/usb.c deleted file mode 100644 index 13e010d91e..0000000000 --- a/arch/arm/cpu/pxa/usb.c +++ /dev/null @@ -1,89 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2006 - * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de> - */ - -#include <common.h> -#include <linux/delay.h> - -#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) -# if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_CPU_PXA27X) - -#include <asm/arch/pxa-regs.h> -#include <asm/io.h> -#include <usb.h> - -int usb_cpu_init(void) -{ -#if defined(CONFIG_CPU_MONAHANS) - /* Enable USB host clock. */ - writel(readl(CKENA) | CKENA_2_USBHOST | CKENA_20_UDC, CKENA); - udelay(100); -#endif -#if defined(CONFIG_CPU_PXA27X) - /* Enable USB host clock. */ - writel(readl(CKEN) | CKEN10_USBHOST, CKEN); -#endif - -#if defined(CONFIG_CPU_MONAHANS) - /* Configure Port 2 for Host (USB Client Registers) */ - writel(0x3000c, UP2OCR); -#endif - - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - mdelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR); - while (readl(UHCHR) & UHCHR_FSBIR) - udelay(1); - -#if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) - writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR); -#endif -#if defined(CONFIG_CPU_PXA27X) - writel(readl(UHCHR) & ~UHCHR_SSEP2, UHCHR); -#endif - writel(readl(UHCHR) & ~(UHCHR_SSEP1 | UHCHR_SSE), UHCHR); - - return 0; -} - -int usb_cpu_stop(void) -{ - writel(readl(UHCHR) | UHCHR_FHR, UHCHR); - udelay(11); - writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR); - - writel(readl(UHCCOMS) | UHCCOMS_HCR, UHCCOMS); - udelay(10); - -#if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) - writel(readl(UHCHR) | UHCHR_SSEP0, UHCHR); -#endif -#if defined(CONFIG_CPU_PXA27X) - writel(readl(UHCHR) | UHCHR_SSEP2, UHCHR); -#endif - writel(readl(UHCHR) | UHCHR_SSEP1 | UHCHR_SSE, UHCHR); - -#if defined(CONFIG_CPU_MONAHANS) - /* Disable USB host clock. */ - writel(readl(CKENA) & ~(CKENA_2_USBHOST | CKENA_20_UDC), CKENA); - udelay(100); -#endif -#if defined(CONFIG_CPU_PXA27X) - /* Disable USB host clock. */ - writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN); -#endif - - return 0; -} - -int usb_cpu_init_fail(void) -{ - return usb_cpu_stop(); -} - -# endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_CPU_PXA27X) */ -#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */ diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a9f4cccf8d..8f7ecfd0f6 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -5,9 +5,9 @@ dtb-$(CONFIG_TARGET_TAURUS) += at91sam9g20-taurus.dtb dtb-$(CONFIG_TARGET_CORVUS) += at91sam9g45-corvus.dtb dtb-$(CONFIG_TARGET_GURNARD) += at91sam9g45-gurnard.dtb -dtb-$(CONFIG_S5PC100) += s5pc1xx-smdkc100.dtb -dtb-$(CONFIG_S5PC110) += s5pc1xx-goni.dtb -dtb-$(CONFIG_EXYNOS4) += exynos4210-origen.dtb \ +dtb-$(CONFIG_TARGET_SMDKC100) += s5pc1xx-smdkc100.dtb +dtb-$(CONFIG_TARGET_S5P_GONI) += s5pc1xx-goni.dtb +dtb-$(CONFIG_ARCH_EXYNOS4) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-universal_c210.dtb \ exynos4210-trats.dtb \ @@ -19,7 +19,7 @@ dtb-$(CONFIG_TARGET_HIKEY960) += hi3660-hikey960.dtb dtb-$(CONFIG_TARGET_POPLAR) += hi3798cv200-poplar.dtb -dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \ +dtb-$(CONFIG_ARCH_EXYNOS5) += exynos5250-arndale.dtb \ exynos5250-snow.dtb \ exynos5250-spring.dtb \ exynos5250-smdk5250.dtb \ @@ -414,7 +414,7 @@ dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb am437x-sk-evm.dtb \ am437x-cm-t43.dtb dtb-$(CONFIG_TARGET_AM3517_EVM) += am3517-evm.dtb dtb-$(CONFIG_TI816X) += dm8168-evm.dtb -dtb-$(CONFIG_THUNDERX) += thunderx-88xx.dtb +dtb-$(CONFIG_TARGET_THUNDERX_88XX) += thunderx-88xx.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_agilex_socdk.dtb \ diff --git a/arch/arm/dts/ast2500-evb.dts b/arch/arm/dts/ast2500-evb.dts index 4796ed445f..cc577761fa 100644 --- a/arch/arm/dts/ast2500-evb.dts +++ b/arch/arm/dts/ast2500-evb.dts @@ -60,6 +60,10 @@ pinctrl-0 = <&pinctrl_mac2link_default &pinctrl_mdio2_default>; }; +&sdmmc { + status = "okay"; +}; + &sdhci0 { status = "okay"; @@ -73,3 +77,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sd2_default>; }; + +&i2c3 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c7 { + status = "okay"; + + lm75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; +}; diff --git a/arch/arm/dts/ast2500-u-boot.dtsi b/arch/arm/dts/ast2500-u-boot.dtsi index ea60e4c8db..057390fe70 100644 --- a/arch/arm/dts/ast2500-u-boot.dtsi +++ b/arch/arm/dts/ast2500-u-boot.dtsi @@ -28,31 +28,6 @@ clocks = <&scu ASPEED_CLK_MPLL>; resets = <&rst ASPEED_RESET_SDRAM>; }; - - ahb { - u-boot,dm-pre-reloc; - - apb { - u-boot,dm-pre-reloc; - - sdhci0: sdhci@1e740100 { - compatible = "aspeed,ast2500-sdhci"; - reg = <0x1e740100>; - #reset-cells = <1>; - clocks = <&scu ASPEED_CLK_SDIO>; - resets = <&rst ASPEED_RESET_SDIO>; - }; - - sdhci1: sdhci@1e740200 { - compatible = "aspeed,ast2500-sdhci"; - reg = <0x1e740200>; - #reset-cells = <1>; - clocks = <&scu ASPEED_CLK_SDIO>; - resets = <&rst ASPEED_RESET_SDIO>; - }; - }; - - }; }; &uart1 { diff --git a/arch/arm/dts/ast2500.dtsi b/arch/arm/dts/ast2500.dtsi index ee66ef6704..cea08e6f08 100644 --- a/arch/arm/dts/ast2500.dtsi +++ b/arch/arm/dts/ast2500.dtsi @@ -207,6 +207,34 @@ reg = <0x1e720000 0x9000>; // 36K }; + sdmmc: sd-controller@1e740000 { + compatible = "aspeed,ast2500-sd-controller"; + reg = <0x1e740000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1e740000 0x10000>; + clocks = <&scu ASPEED_CLK_GATE_SDCLK>; + status = "disabled"; + + sdhci0: sdhci@100 { + compatible = "aspeed,ast2500-sdhci"; + reg = <0x100 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&scu ASPEED_CLK_SDIO>; + status = "disabled"; + }; + + sdhci1: sdhci@200 { + compatible = "aspeed,ast2500-sdhci"; + reg = <0x200 0x100>; + interrupts = <26>; + sdhci,auto-cmd12; + clocks = <&scu ASPEED_CLK_SDIO>; + status = "disabled"; + }; + }; + gpio: gpio@1e780000 { #gpio-cells = <2>; gpio-controller; diff --git a/arch/arm/dts/ast2600-evb.dts b/arch/arm/dts/ast2600-evb.dts index 0d65054313..a9bba96816 100644 --- a/arch/arm/dts/ast2600-evb.dts +++ b/arch/arm/dts/ast2600-evb.dts @@ -15,9 +15,9 @@ }; aliases { - mmc0 = &emmc_slot0; - mmc1 = &sdhci_slot0; - mmc2 = &sdhci_slot1; + mmc0 = &emmc; + mmc1 = &sdhci0; + mmc2 = &sdhci1; spi0 = &fmc; spi1 = &spi1; spi2 = &spi2; @@ -134,53 +134,52 @@ }; }; -&emmc { - u-boot,dm-pre-reloc; - timing-phase = <0x700ff>; + +&emmc_controller { + status = "okay"; }; -&emmc_slot0 { - u-boot,dm-pre-reloc; - status = "okay"; - bus-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_emmc_default>; - sdhci-drive-type = <1>; +&emmc { + non-removable; + bus-width = <4>; + max-frequency = <100000000>; + clk-phase-mmc-hs200 = <9>, <225>; }; &i2c4 { status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c5_default>; }; &i2c5 { status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c6_default>; }; &i2c6 { status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c7_default>; }; &i2c7 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c8_default>; + temp@2e { + compatible = "adi,adt7490"; + reg = <0x2e>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + pagesize = <16>; + }; }; &i2c8 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c9_default>; + lm75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; }; &mdio0 { diff --git a/arch/arm/dts/ast2600.dtsi b/arch/arm/dts/ast2600.dtsi index 64074309b7..ac8cd4d67d 100644 --- a/arch/arm/dts/ast2600.dtsi +++ b/arch/arm/dts/ast2600.dtsi @@ -416,60 +416,51 @@ status = "disabled"; }; - sdhci: sdhci@1e740000 { - #interrupt-cells = <1>; - compatible = "aspeed,aspeed-sdhci-irq", "simple-mfd"; - reg = <0x1e740000 0x1000>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - clocks = <&scu ASPEED_CLK_GATE_SDCLK>, - <&scu ASPEED_CLK_GATE_SDEXTCLK>; - clock-names = "ctrlclk", "extclk"; + sdc: sdc@1e740000 { + compatible = "aspeed,ast2600-sd-controller"; + reg = <0x1e740000 0x100>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x1e740000 0x1000>; + ranges = <0 0x1e740000 0x10000>; + clocks = <&scu ASPEED_CLK_GATE_SDCLK>; + status = "disabled"; - sdhci_slot0: sdhci_slot0@100 { - compatible = "aspeed,sdhci-ast2600"; + sdhci0: sdhci@1e740100 { + compatible = "aspeed,ast2600-sdhci", "sdhci"; reg = <0x100 0x100>; - interrupts = <0>; - interrupt-parent = <&sdhci>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; sdhci,auto-cmd12; clocks = <&scu ASPEED_CLK_SDIO>; status = "disabled"; }; - sdhci_slot1: sdhci_slot1@200 { - compatible = "aspeed,sdhci-ast2600"; + sdhci1: sdhci@1e740200 { + compatible = "aspeed,ast2600-sdhci", "sdhci"; reg = <0x200 0x100>; - interrupts = <1>; - interrupt-parent = <&sdhci>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; sdhci,auto-cmd12; clocks = <&scu ASPEED_CLK_SDIO>; status = "disabled"; }; }; - emmc: emmc@1e750000 { - #interrupt-cells = <1>; - compatible = "aspeed,aspeed-emmc-irq", "simple-mfd"; - reg = <0x1e750000 0x1000>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - clocks = <&scu ASPEED_CLK_GATE_EMMCCLK>, - <&scu ASPEED_CLK_GATE_EMMCEXTCLK>; - clock-names = "ctrlclk", "extclk"; + emmc_controller: sdc@1e750000 { + compatible = "aspeed,ast2600-sd-controller"; + reg = <0x1e750000 0x100>; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x1e750000 0x1000>; + ranges = <0 0x1e750000 0x10000>; + clocks = <&scu ASPEED_CLK_GATE_EMMCCLK>; + status = "disabled"; - emmc_slot0: emmc_slot0@100 { - compatible = "aspeed,emmc-ast2600"; + emmc: sdhci@1e750100 { + compatible = "aspeed,ast2600-sdhci"; reg = <0x100 0x100>; - interrupts = <0>; - interrupt-parent = <&emmc>; + sdhci,auto-cmd12; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&scu ASPEED_CLK_EMMC>; - status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc_default>; }; }; @@ -832,7 +823,10 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; status = "disabled"; }; @@ -845,7 +839,10 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; status = "disabled"; }; @@ -858,7 +855,11 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + status = "disabled"; }; i2c3: i2c@200 { @@ -870,7 +871,11 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + status = "disabled"; }; i2c4: i2c@280 { @@ -882,7 +887,11 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + status = "disabled"; }; i2c5: i2c@300 { @@ -894,7 +903,11 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c6_default>; + status = "disabled"; }; i2c6: i2c@380 { @@ -906,7 +919,11 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c7_default>; + status = "disabled"; }; i2c7: i2c@400 { @@ -918,7 +935,11 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c8_default>; + status = "disabled"; }; i2c8: i2c@480 { @@ -930,7 +951,11 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c9_default>; + status = "disabled"; }; i2c9: i2c@500 { @@ -942,7 +967,10 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; status = "disabled"; }; @@ -955,7 +983,10 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; status = "disabled"; }; @@ -968,7 +999,10 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c12_default>; status = "disabled"; }; @@ -981,7 +1015,10 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c13_default>; status = "disabled"; }; @@ -994,7 +1031,10 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c14_default>; status = "disabled"; }; @@ -1007,7 +1047,10 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c15_default>; status = "disabled"; }; @@ -1020,7 +1063,10 @@ compatible = "aspeed,ast2600-i2c-bus"; bus-frequency = <100000>; interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst ASPEED_RESET_I2C>; clocks = <&scu ASPEED_CLK_APB2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c16_default>; status = "disabled"; }; @@ -1246,6 +1292,7 @@ function = "I2C1"; groups = "I2C1"; }; + pinctrl_i2c2_default: i2c2_default { function = "I2C2"; groups = "I2C2"; diff --git a/arch/arm/dts/at91-sama5d2_icp.dts b/arch/arm/dts/at91-sama5d2_icp.dts index 44522197ff..0b0db1b2be 100644 --- a/arch/arm/dts/at91-sama5d2_icp.dts +++ b/arch/arm/dts/at91-sama5d2_icp.dts @@ -68,19 +68,19 @@ status = "okay"; eeprom@50 { - compatible = "microchip,24aa02e48"; + compatible = "atmel,24c02"; /* EEPROM is 2Kbits microchip 24aa025e48, an at24c02 with page size of 16 */ reg = <0x50>; pagesize = <16>; }; eeprom@52 { - compatible = "microchip,24aa02e48"; + compatible = "atmel,24c02"; /* EEPROM is 2Kbits microchip 24aa025e48, an at24c02 with page size of 16 */ reg = <0x52>; pagesize = <16>; }; eeprom@53 { - compatible = "microchip,24aa02e48"; + compatible = "atmel,24c02"; /* EEPROM is 2Kbits microchip 24aa025e48, an at24c02 with page size of 16 */ reg = <0x53>; pagesize = <16>; }; diff --git a/arch/arm/dts/at91-sama7g5ek.dts b/arch/arm/dts/at91-sama7g5ek.dts index ee46112b08..eaba0de3f7 100644 --- a/arch/arm/dts/at91-sama7g5ek.dts +++ b/arch/arm/dts/at91-sama7g5ek.dts @@ -14,6 +14,7 @@ #include <dt-bindings/mfd/atmel-flexcom.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/at91.h> +#include <dt-bindings/sound/microchip,pdmc.h> / { model = "Microchip SAMA7G5-EK"; @@ -404,13 +405,13 @@ status = "okay"; eeprom@52 { - compatible = "microchip,24aa02e48"; + compatible = "atmel,24c02"; /* EEPROM is 2Kbits microchip 24aa025e48, an at24c02 with page size of 16 */ reg = <0x52>; pagesize = <16>; }; eeprom@53 { - compatible = "microchip,24aa02e48"; + compatible = "atmel,24c02"; /* EEPROM is 2Kbits microchip 24aa025e48, an at24c02 with page size of 16 */ reg = <0x53>; pagesize = <16>; }; @@ -468,7 +469,7 @@ &pinctrl_gmac1_mdio_default &pinctrl_gmac1_phy_irq>; phy-mode = "rmii"; - status = "okay"; + status = "okay"; /* Conflict with pdmc0. */ ethernet-phy@0 { reg = <0x0>; @@ -482,6 +483,17 @@ pinctrl-0 = <&pinctrl_i2s0_default>; }; +&pdmc0 { + #sound-dai-cells = <0>; + microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */ + <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */ + <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */ + <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */ + status = "disabled"; /* Conflict with gmac1. */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pdmc0_default>; +}; + &pioA { pinctrl_can0_default: can0_default { @@ -651,6 +663,13 @@ bias-disable; }; + pinctrl_pdmc0_default: pdmc0_default { + pinmux = <PIN_PD23__PDMC0_DS0>, + <PIN_PD24__PDMC0_DS1>, + <PIN_PD22__PDMC0_CLK>; + bias_disable; + }; + pinctrl_qspi: qspi { pinmux = <PIN_PB12__QSPI0_IO0>, <PIN_PB11__QSPI0_IO1>, diff --git a/arch/arm/dts/k3-am625-r5-sk.dts b/arch/arm/dts/k3-am625-r5-sk.dts index 2691af40a1..5aab858edd 100644 --- a/arch/arm/dts/k3-am625-r5-sk.dts +++ b/arch/arm/dts/k3-am625-r5-sk.dts @@ -28,6 +28,7 @@ /* 2G RAM */ reg = <0x00000000 0x80000000 0x00000000 0x80000000>; + u-boot,dm-spl; }; reserved-memory { diff --git a/arch/arm/dts/k3-am625-sk-u-boot.dtsi b/arch/arm/dts/k3-am625-sk-u-boot.dtsi index e1971ecdfe..159fa36bbe 100644 --- a/arch/arm/dts/k3-am625-sk-u-boot.dtsi +++ b/arch/arm/dts/k3-am625-sk-u-boot.dtsi @@ -13,6 +13,10 @@ aliases { mmc1 = &sdhci1; }; + + memory@80000000 { + u-boot,dm-spl; + }; }; &cbass_main{ diff --git a/arch/arm/dts/sam9x60ek.dts b/arch/arm/dts/sam9x60ek.dts index 32ffe93b4d..54c694bd78 100644 --- a/arch/arm/dts/sam9x60ek.dts +++ b/arch/arm/dts/sam9x60ek.dts @@ -49,7 +49,7 @@ status = "okay"; nor_flash: sst26vf064@0 { - compatible = "spi-flash"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <80000000>; spi-rx-bus-width = <4>; @@ -72,7 +72,7 @@ status = "okay"; eeprom@53 { - compatible = "atmel,24c32"; + compatible = "atmel,24c02"; /* EEPROM is 2Kbits microchip 24aa025e48, an at24c02 with page size of 16 */ reg = <0x53>; pagesize = <16>; }; diff --git a/arch/arm/dts/sama5d27_som1.dtsi b/arch/arm/dts/sama5d27_som1.dtsi index ea7540bcfc..db4fefadcd 100644 --- a/arch/arm/dts/sama5d27_som1.dtsi +++ b/arch/arm/dts/sama5d27_som1.dtsi @@ -92,7 +92,7 @@ status = "okay"; i2c_eeprom: i2c_eeprom@50 { - compatible = "microchip,24aa02e48"; + compatible = "atmel,24c02"; /* EEPROM is 2Kbits microchip 24aa02e48 */ reg = <0x50>; }; }; diff --git a/arch/arm/dts/sama7g5.dtsi b/arch/arm/dts/sama7g5.dtsi index 4efecdb92c..97400dc18e 100644 --- a/arch/arm/dts/sama7g5.dtsi +++ b/arch/arm/dts/sama7g5.dtsi @@ -33,6 +33,7 @@ reg = <0x0>; clocks = <&pmc PMC_TYPE_CORE 8>, <&pmc PMC_TYPE_CORE 22>, <&main_xtal>; clock-names = "cpu", "master", "xtal"; + operating-points-v2 = <&cpu_opp_table>; }; }; @@ -225,7 +226,7 @@ status = "disabled"; }; - rtt: rtt@e001d020 { + rtt: rtc@e001d020 { compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt"; reg = <0xe001d020 0x30>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; @@ -490,6 +491,30 @@ status = "disabled"; }; + pdmc0: sound@e1608000 { + compatible = "microchip,sama7g5-pdmc"; + reg = <0xe1608000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + #sound-dai-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(37)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 68>, <&pmc PMC_TYPE_GCK 68>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + + pdmc1: sound@e160c000 { + compatible = "microchip,sama7g5-pdmc"; + reg = <0xe160c000 0x1000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + #sound-dai-cells = <0>; + dmas = <&dma0 AT91_XDMAC_DT_PERID(38)>; + dma-names = "rx"; + clocks = <&pmc PMC_TYPE_PERIPHERAL 69>, <&pmc PMC_TYPE_GCK 69>; + clock-names = "pclk", "gclk"; + status = "disabled"; + }; + spdifrx: spdifrx@e1614000 { #sound-dai-cells = <0>; compatible = "microchip,sama7g5-spdifrx"; @@ -628,9 +653,9 @@ #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 39>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>, - <&dma0 AT91_XDMAC_DT_PERID(8)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(8)>, + <&dma0 AT91_XDMAC_DT_PERID(7)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; @@ -814,9 +839,9 @@ #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 46>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>, - <&dma0 AT91_XDMAC_DT_PERID(22)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(22)>, + <&dma0 AT91_XDMAC_DT_PERID(21)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; @@ -838,9 +863,9 @@ #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; atmel,fifo-size = <32>; - dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>, - <&dma0 AT91_XDMAC_DT_PERID(24)>; - dma-names = "rx", "tx"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(24)>, + <&dma0 AT91_XDMAC_DT_PERID(23)>; + dma-names = "tx", "rx"; status = "disabled"; }; }; @@ -885,7 +910,6 @@ #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - interrupt-parent; reg = <0xe8c11000 0x1000>, <0xe8c12000 0x2000>; }; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/config.h b/arch/arm/include/asm/arch-fsl-layerscape/config.h index 1315bebb56..cd795d6919 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/config.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/config.h @@ -55,17 +55,6 @@ /* SMMU Defintions */ #define SMMU_BASE 0x05000000 /* GR0 Base */ -/* SFP */ -#define CONFIG_SYS_FSL_SFP_VER_3_4 -#define CONFIG_SYS_FSL_SFP_LE -#define CONFIG_SYS_FSL_SRK_LE - -/* Security Monitor */ -#define CONFIG_SYS_FSL_SEC_MON_LE - -/* Secure Boot */ -#define CONFIG_ESBC_HDR_LS - /* DCFG - GUR */ #define CONFIG_SYS_FSL_CCSR_GUR_LE @@ -160,17 +149,6 @@ #define CONFIG_SYS_MEMAC_LITTLE_ENDIAN -/* SFP */ -#define CONFIG_SYS_FSL_SFP_VER_3_4 -#define CONFIG_SYS_FSL_SFP_LE -#define CONFIG_SYS_FSL_SRK_LE - -/* Security Monitor */ -#define CONFIG_SYS_FSL_SEC_MON_LE - -/* Secure Boot */ -#define CONFIG_ESBC_HDR_LS - /* DCFG - GUR */ #define CONFIG_SYS_FSL_CCSR_GUR_LE #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 @@ -215,17 +193,6 @@ /* SMMU Definitions */ #define SMMU_BASE 0x05000000 /* GR0 Base */ -/* SFP */ -#define CONFIG_SYS_FSL_SFP_VER_3_4 -#define CONFIG_SYS_FSL_SFP_LE -#define CONFIG_SYS_FSL_SRK_LE - -/* Security Monitor */ -#define CONFIG_SYS_FSL_SEC_MON_LE - -/* Secure Boot */ -#define CONFIG_ESBC_HDR_LS - /* DCFG - GUR */ #define CONFIG_SYS_FSL_CCSR_GUR_LE @@ -274,20 +241,9 @@ #define CONFIG_SYS_MEMAC_LITTLE_ENDIAN -/* SFP */ -#define CONFIG_SYS_FSL_SFP_VER_3_4 -#define CONFIG_SYS_FSL_SFP_LE -#define CONFIG_SYS_FSL_SRK_LE - /* SEC */ #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 -/* Security Monitor */ -#define CONFIG_SYS_FSL_SEC_MON_LE - -/* Secure Boot */ -#define CONFIG_ESBC_HDR_LS - /* DCFG - GUR */ #define CONFIG_SYS_FSL_CCSR_GUR_LE @@ -321,11 +277,6 @@ #define QE_NUM_OF_SNUM 28 #define CONFIG_SYS_FSL_IFC_BE -#define CONFIG_SYS_FSL_SFP_VER_3_2 -#define CONFIG_SYS_FSL_SEC_MON_BE -#define CONFIG_SYS_FSL_SFP_BE -#define CONFIG_SYS_FSL_SRK_LE -#define CONFIG_KEY_REVOCATION /* SMMU Defintions */ #define SMMU_BASE 0x09000000 @@ -361,11 +312,6 @@ #elif defined(CONFIG_ARCH_LS1012A) #define GICD_BASE 0x01401000 #define GICC_BASE 0x01402000 -#define CONFIG_SYS_FSL_SFP_VER_3_2 -#define CONFIG_SYS_FSL_SEC_MON_BE -#define CONFIG_SYS_FSL_SFP_BE -#define CONFIG_SYS_FSL_SRK_LE -#define CONFIG_KEY_REVOCATION #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 #define CONFIG_SYS_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE @@ -380,11 +326,6 @@ #define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_DDR_BLOCK1_SIZE #define CONFIG_SYS_FSL_IFC_BE -#define CONFIG_SYS_FSL_SFP_VER_3_2 -#define CONFIG_SYS_FSL_SEC_MON_BE -#define CONFIG_SYS_FSL_SFP_BE -#define CONFIG_SYS_FSL_SRK_LE -#define CONFIG_KEY_REVOCATION /* SMMU Defintions */ #define SMMU_BASE 0x09000000 diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h index 61db1738f3..f2dbcdc816 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h @@ -13,10 +13,8 @@ #define CONFIG_SYS_DCSRBAR 0x20000000 #define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00140000) -#define CONFIG_SYS_DCSR_COP_CCP_ADDR (CONFIG_SYS_DCSRBAR + 0x02008040) #define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000) -#define CONFIG_SYS_GIC400_ADDR (CONFIG_SYS_IMMR + 0x00400000) #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000) #define SYS_FSL_QSPI_ADDR (CONFIG_SYS_IMMR + 0x00550000) #define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000) @@ -26,9 +24,7 @@ #define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000) #define CONFIG_SYS_FSL_BMAN_ADDR (CONFIG_SYS_IMMR + 0x00890000) #define CONFIG_SYS_FSL_QMAN_ADDR (CONFIG_SYS_IMMR + 0x00880000) -#define CONFIG_SYS_FSL_FMAN_ADDR (CONFIG_SYS_IMMR + 0x00a00000) #define CONFIG_SYS_FSL_SERDES_ADDR (CONFIG_SYS_IMMR + 0x00ea0000) -#define CONFIG_SYS_FSL_DCFG_ADDR (CONFIG_SYS_IMMR + 0x00ee0000) #define CONFIG_SYS_FSL_CLK_ADDR (CONFIG_SYS_IMMR + 0x00ee1000) #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011c0600) @@ -37,7 +33,6 @@ #define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x01f00000) #define CONFIG_SYS_XHCI_USB2_ADDR (CONFIG_SYS_IMMR + 0x02000000) #define CONFIG_SYS_XHCI_USB3_ADDR (CONFIG_SYS_IMMR + 0x02100000) -#define CONFIG_SYS_EHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x07600000) #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000) #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000) #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_IMMR + 0x2600000) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 304cd7980a..570397b3c0 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -52,7 +52,6 @@ #define CONFIG_SYS_FSL_DCSR_DDR_ADDR 0x70012c000ULL #define CONFIG_SYS_FSL_DCSR_DDR2_ADDR 0x70012d000ULL #define CONFIG_SYS_FSL_DCSR_DDR3_ADDR 0x700132000ULL -#define CONFIG_SYS_FSL_DCSR_DDR4_ADDR 0x700133000ULL #define I2C1_BASE_ADDR (CONFIG_SYS_IMMR + 0x01000000) #define I2C2_BASE_ADDR (CONFIG_SYS_IMMR + 0x01010000) diff --git a/arch/arm/include/asm/arch-lpc32xx/config.h b/arch/arm/include/asm/arch-lpc32xx/config.h index 653792c610..32d68cbeb8 100644 --- a/arch/arm/include/asm/arch-lpc32xx/config.h +++ b/arch/arm/include/asm/arch-lpc32xx/config.h @@ -52,11 +52,7 @@ /* USB OHCI */ #if defined(CONFIG_USB_OHCI_LPC32XX) -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 #define CONFIG_SYS_USB_OHCI_REGS_BASE USB_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "lpc32xx-ohci" #endif #endif /* _LPC32XX_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index 3b1d9a3f0c..e5f61ea4a6 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -32,15 +32,11 @@ #define CONFIG_SYS_FSL_RCPM_ADDR (CONFIG_SYS_IMMR + 0x00ee2000) #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500) -#define CONFIG_SYS_DCU_ADDR (CONFIG_SYS_IMMR + 0x01ce0000) #define CONFIG_SYS_XHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x02100000) -#define CONFIG_SYS_EHCI_USB1_ADDR (CONFIG_SYS_IMMR + 0x07600000) #define CONFIG_SYS_FSL_SEC_OFFSET 0x00700000 #define CONFIG_SYS_FSL_JR0_OFFSET 0x00710000 #define CONFIG_SYS_TSEC1_OFFSET 0x01d10000 -#define CONFIG_SYS_TSEC2_OFFSET 0x01d50000 -#define CONFIG_SYS_TSEC3_OFFSET 0x01d90000 #define CONFIG_SYS_MDIO1_OFFSET 0x01d24000 #define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET) @@ -80,23 +76,17 @@ #define AHCI_BASE_ADDR (CONFIG_SYS_IMMR + 0x02200000) #ifdef CONFIG_DDR_SPD #define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_LS1_DDR_BLOCK1_SIZE ((phys_size_t)2 << 30) -#define CONFIG_MAX_MEM_MAPPED CONFIG_SYS_LS1_DDR_BLOCK1_SIZE +#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30) #endif #define CONFIG_SYS_FSL_IFC_BE #define CONFIG_SYS_FSL_ESDHC_BE #define CONFIG_SYS_FSL_WDOG_BE #define CONFIG_SYS_FSL_DSPI_BE -#define CONFIG_SYS_FSL_SEC_MON_LE -#define CONFIG_SYS_FSL_SFP_VER_3_2 -#define CONFIG_SYS_FSL_SFP_BE -#define CONFIG_SYS_FSL_SRK_LE #define DCU_LAYER_MAX_NUM 16 #ifdef CONFIG_ARCH_LS1021A -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FSL_MAX_NUM_OF_SEC 1 #else #error SoC not defined diff --git a/arch/arm/include/asm/arch-pxa/bitfield.h b/arch/arm/include/asm/arch-pxa/bitfield.h deleted file mode 100644 index 104a21c2e4..0000000000 --- a/arch/arm/include/asm/arch-pxa/bitfield.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * FILE bitfield.h - * - * Version 1.1 - * Author Copyright (c) Marc A. Viredaz, 1998 - * DEC Western Research Laboratory, Palo Alto, CA - * Date April 1998 (April 1997) - * System Advanced RISC Machine (ARM) - * Language C or ARM Assembly - * Purpose Definition of macros to operate on bit fields. - */ - - -#ifndef __BITFIELD_H -#define __BITFIELD_H - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) -#else -#define UData(Data) (Data) -#endif - - -/* - * MACRO: Fld - * - * Purpose - * The macro "Fld" encodes a bit field, given its size and its shift value - * with respect to bit 0. - * - * Note - * A more intuitive way to encode bit fields would have been to use their - * mask. However, extracting size and shift value information from a bit - * field's mask is cumbersome and might break the assembler (255-character - * line-size limit). - * - * Input - * Size Size of the bit field, in number of bits. - * Shft Shift value of the bit field with respect to bit 0. - * - * Output - * Fld Encoded bit field. - */ - -#define Fld(Size, Shft) (((Size) << 16) + (Shft)) - - -/* - * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit - * - * Purpose - * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return - * the size, shift value, mask, aligned mask, and first bit of a - * bit field. - * - * Input - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FSize Size of the bit field, in number of bits. - * FShft Shift value of the bit field with respect to bit 0. - * FMsk Mask for the bit field. - * FAlnMsk Mask for the bit field, aligned on bit 0. - * F1stBit First bit of the bit field. - */ - -#define FSize(Field) ((Field) >> 16) -#define FShft(Field) ((Field) & 0x0000FFFF) -#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -#define F1stBit(Field) (UData (1) << FShft (Field)) - - -/* - * MACRO: FInsrt - * - * Purpose - * The macro "FInsrt" inserts a value into a bit field by shifting the - * former appropriately. - * - * Input - * Value Bit-field value. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FInsrt Bit-field value positioned appropriately. - */ - -#define FInsrt(Value, Field) \ - (UData (Value) << FShft (Field)) - - -/* - * MACRO: FExtr - * - * Purpose - * The macro "FExtr" extracts the value of a bit field by masking and - * shifting it appropriately. - * - * Input - * Data Data containing the bit-field to be extracted. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FExtr Bit-field value. - */ - -#define FExtr(Data, Field) \ - ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) - - -#endif /* __BITFIELD_H */ diff --git a/arch/arm/include/asm/arch-pxa/config.h b/arch/arm/include/asm/arch-pxa/config.h deleted file mode 100644 index 11effd47f5..0000000000 --- a/arch/arm/include/asm/arch-pxa/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2014 Andrew Ruder <andrew.ruder@elecsyscorp.com> - */ - -#ifndef _ASM_ARM_PXA_CONFIG_ -#define _ASM_ARM_PXA_CONFIG_ - -#include <asm/arch/pxa-regs.h> - -/* - * Generic timer support - */ -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) -#define CONFIG_SYS_TIMER_RATE 3250000 -#else -#error "Timer frequency unknown - please config PXA CPU type" -#endif - -#define CONFIG_SYS_TIMER_COUNTER OSCR - -#endif /* _ASM_ARM_PXA_CONFIG_ */ diff --git a/arch/arm/include/asm/arch-pxa/hardware.h b/arch/arm/include/asm/arch-pxa/hardware.h deleted file mode 100644 index 6d0023d7b8..0000000000 --- a/arch/arm/include/asm/arch-pxa/hardware.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/hardware.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note: This file was taken from linux-2.4.19-rmk4-pxa1 - * - * - 2003/01/20 implementation specifics activated - * Robert Schwebel <r.schwebel@pengutronix.de> - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <asm/mach-types.h> - -/* - * Define CONFIG_CPU_MONAHANS in case some CPU of the PXA3xx family is selected. - * PXA300/310/320 all have distinct register mappings in some cases, that's why - * the exact CPU has to be selected. CONFIG_CPU_MONAHANS is a helper for common - * drivers and compatibility glue with old source then. - */ -#ifndef CONFIG_CPU_MONAHANS -#if defined(CONFIG_CPU_PXA300) || \ - defined(CONFIG_CPU_PXA310) || \ - defined(CONFIG_CPU_PXA320) -#define CONFIG_CPU_MONAHANS -#endif -#endif - -/* - * These are statically mapped PCMCIA IO space for designs using it as a - * generic IO bus, typically with ISA parts, hardwired IDE interfaces, etc. - * The actual PCMCIA code is mapping required IO region at run time. - */ -#define PCMCIA_IO_0_BASE 0xf6000000 -#define PCMCIA_IO_1_BASE 0xf7000000 - - -/* - * We requires absolute addresses. - */ -#define PCIO_BASE 0 - -/* - * Workarounds for at least 2 errata so far require this. - * The mapping is set in mach-pxa/generic.c. - */ -#define UNCACHED_PHYS_0 0xff000000 -#define UNCACHED_ADDR UNCACHED_PHYS_0 - -/* - * Intel PXA internal I/O mappings: - * - * 0x40000000 - 0x41ffffff <--> 0xf8000000 - 0xf9ffffff - * 0x44000000 - 0x45ffffff <--> 0xfa000000 - 0xfbffffff - * 0x48000000 - 0x49ffffff <--> 0xfc000000 - 0xfdffffff - */ - -#include "pxa-regs.h" - -#ifndef __ASSEMBLY__ - -/* - * GPIO edge detection for IRQs: - * IRQs are generated on Falling-Edge, Rising-Edge, or both. - * This must be called *before* the corresponding IRQ is registered. - * Use this instead of directly setting GRER/GFER. - */ -#define GPIO_FALLING_EDGE 1 -#define GPIO_RISING_EDGE 2 -#define GPIO_BOTH_EDGES 3 - -#endif - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h deleted file mode 100644 index b81b42c07c..0000000000 --- a/arch/arm/include/asm/arch-pxa/pxa-regs.h +++ /dev/null @@ -1,2635 +0,0 @@ -/* - * linux/include/asm-arm/arch-pxa/pxa-regs.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * - 2003/01/20: Robert Schwebel <r.schwebel@pengutronix.de - * Original file taken from linux-2.4.19-rmk4-pxa1. Added some definitions. - * Added include for hardware.h (for __REG definition) - */ -#ifndef _PXA_REGS_H_ -#define _PXA_REGS_H_ - -#include "bitfield.h" -#include "hardware.h" - -/* FIXME hack so that SA-1111.h will work [cb] */ - -#ifndef __ASSEMBLY__ -typedef unsigned short Word16 ; -typedef unsigned int Word32 ; -typedef Word32 Word ; -typedef Word Quad [4] ; -typedef void *Address ; -typedef void (*ExcpHndlr) (void) ; -#endif - -/* - * PXA Chip selects - */ -#ifdef CONFIG_CPU_MONAHANS -#define PXA_CS0_PHYS 0x00000000 /* for both small and large same start */ -#define PXA_CS1_PHYS 0x04000000 /* Small partition start address (64MB) */ -#define PXA_CS1_LPHYS 0x30000000 /* Large partition start address (256MB) */ -#define PXA_CS2_PHYS 0x10000000 /* (64MB) */ -#define PXA_CS3_PHYS 0x14000000 /* (64MB) */ -#define PXA_PCMCIA_PHYS 0x20000000 /* (256MB) */ -#else -#define PXA_CS0_PHYS 0x00000000 -#define PXA_CS1_PHYS 0x04000000 -#define PXA_CS2_PHYS 0x08000000 -#define PXA_CS3_PHYS 0x0C000000 -#define PXA_CS4_PHYS 0x10000000 -#define PXA_CS5_PHYS 0x14000000 -#endif /* CONFIG_CPU_MONAHANS */ - -/* - * Personal Computer Memory Card International Association (PCMCIA) sockets - */ -#define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ -#define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ -#define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ -#define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ -#define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ - -#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ -#define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ -#define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ -#define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ -#define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ -#endif - -#define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ -#define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ -#define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ -#define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ - -#define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ - (0x20000000 + (Nb)*PCMCIASp) -#define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ -#define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ - (_PCMCIA (Nb) + 2*PCMCIAPrtSp) -#define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ - (_PCMCIA (Nb) + 3*PCMCIAPrtSp) - -#define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ -#define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ -#define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ -#define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ - -#ifndef CONFIG_CPU_MONAHANS /* Monahans supports only one slot */ -#define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ -#define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ -#define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ -#define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ -#endif - -/* - * DMA Controller - */ -#define DCSR0 0x40000000 /* DMA Control / Status Register for Channel 0 */ -#define DCSR1 0x40000004 /* DMA Control / Status Register for Channel 1 */ -#define DCSR2 0x40000008 /* DMA Control / Status Register for Channel 2 */ -#define DCSR3 0x4000000c /* DMA Control / Status Register for Channel 3 */ -#define DCSR4 0x40000010 /* DMA Control / Status Register for Channel 4 */ -#define DCSR5 0x40000014 /* DMA Control / Status Register for Channel 5 */ -#define DCSR6 0x40000018 /* DMA Control / Status Register for Channel 6 */ -#define DCSR7 0x4000001c /* DMA Control / Status Register for Channel 7 */ -#define DCSR8 0x40000020 /* DMA Control / Status Register for Channel 8 */ -#define DCSR9 0x40000024 /* DMA Control / Status Register for Channel 9 */ -#define DCSR10 0x40000028 /* DMA Control / Status Register for Channel 10 */ -#define DCSR11 0x4000002c /* DMA Control / Status Register for Channel 11 */ -#define DCSR12 0x40000030 /* DMA Control / Status Register for Channel 12 */ -#define DCSR13 0x40000034 /* DMA Control / Status Register for Channel 13 */ -#define DCSR14 0x40000038 /* DMA Control / Status Register for Channel 14 */ -#define DCSR15 0x4000003c /* DMA Control / Status Register for Channel 15 */ -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) -#define DCSR16 0x40000040 /* DMA Control / Status Register for Channel 16 */ -#define DCSR17 0x40000044 /* DMA Control / Status Register for Channel 17 */ -#define DCSR18 0x40000048 /* DMA Control / Status Register for Channel 18 */ -#define DCSR19 0x4000004c /* DMA Control / Status Register for Channel 19 */ -#define DCSR20 0x40000050 /* DMA Control / Status Register for Channel 20 */ -#define DCSR21 0x40000054 /* DMA Control / Status Register for Channel 21 */ -#define DCSR22 0x40000058 /* DMA Control / Status Register for Channel 22 */ -#define DCSR23 0x4000005c /* DMA Control / Status Register for Channel 23 */ -#define DCSR24 0x40000060 /* DMA Control / Status Register for Channel 24 */ -#define DCSR25 0x40000064 /* DMA Control / Status Register for Channel 25 */ -#define DCSR26 0x40000068 /* DMA Control / Status Register for Channel 26 */ -#define DCSR27 0x4000006c /* DMA Control / Status Register for Channel 27 */ -#define DCSR28 0x40000070 /* DMA Control / Status Register for Channel 28 */ -#define DCSR29 0x40000074 /* DMA Control / Status Register for Channel 29 */ -#define DCSR30 0x40000078 /* DMA Control / Status Register for Channel 30 */ -#define DCSR31 0x4000007c /* DMA Control / Status Register for Channel 31 */ -#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */ - -#define DCSR(x) (0x40000000 | ((x) << 2)) - -#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */ -#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */ -#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */ - -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) -#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */ -#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */ -#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */ -#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */ -#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */ -#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */ -#define DCSR_ENRINTR (1 << 9) /* The end of Receive */ -#endif - -#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */ -#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */ -#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */ -#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */ -#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */ - -#define DINT 0x400000f0 /* DMA Interrupt Register */ - -#define DRCMR0 0x40000100 /* Request to Channel Map Register for DREQ 0 */ -#define DRCMR1 0x40000104 /* Request to Channel Map Register for DREQ 1 */ -#define DRCMR2 0x40000108 /* Request to Channel Map Register for I2S receive Request */ -#define DRCMR3 0x4000010c /* Request to Channel Map Register for I2S transmit Request */ -#define DRCMR4 0x40000110 /* Request to Channel Map Register for BTUART receive Request */ -#define DRCMR5 0x40000114 /* Request to Channel Map Register for BTUART transmit Request. */ -#define DRCMR6 0x40000118 /* Request to Channel Map Register for FFUART receive Request */ -#define DRCMR7 0x4000011c /* Request to Channel Map Register for FFUART transmit Request */ -#define DRCMR8 0x40000120 /* Request to Channel Map Register for AC97 microphone Request */ -#define DRCMR9 0x40000124 /* Request to Channel Map Register for AC97 modem receive Request */ -#define DRCMR10 0x40000128 /* Request to Channel Map Register for AC97 modem transmit Request */ -#define DRCMR11 0x4000012c /* Request to Channel Map Register for AC97 audio receive Request */ -#define DRCMR12 0x40000130 /* Request to Channel Map Register for AC97 audio transmit Request */ -#define DRCMR13 0x40000134 /* Request to Channel Map Register for SSP receive Request */ -#define DRCMR14 0x40000138 /* Request to Channel Map Register for SSP transmit Request */ -#define DRCMR15 0x4000013c /* Reserved */ -#define DRCMR16 0x40000140 /* Reserved */ -#define DRCMR17 0x40000144 /* Request to Channel Map Register for ICP receive Request */ -#define DRCMR18 0x40000148 /* Request to Channel Map Register for ICP transmit Request */ -#define DRCMR19 0x4000014c /* Request to Channel Map Register for STUART receive Request */ -#define DRCMR20 0x40000150 /* Request to Channel Map Register for STUART transmit Request */ -#define DRCMR21 0x40000154 /* Request to Channel Map Register for MMC receive Request */ -#define DRCMR22 0x40000158 /* Request to Channel Map Register for MMC transmit Request */ -#define DRCMR23 0x4000015c /* Reserved */ -#define DRCMR24 0x40000160 /* Reserved */ -#define DRCMR25 0x40000164 /* Request to Channel Map Register for USB endpoint 1 Request */ -#define DRCMR26 0x40000168 /* Request to Channel Map Register for USB endpoint 2 Request */ -#define DRCMR27 0x4000016C /* Request to Channel Map Register for USB endpoint 3 Request */ -#define DRCMR28 0x40000170 /* Request to Channel Map Register for USB endpoint 4 Request */ -#define DRCMR29 0x40000174 /* Reserved */ -#define DRCMR30 0x40000178 /* Request to Channel Map Register for USB endpoint 6 Request */ -#define DRCMR31 0x4000017C /* Request to Channel Map Register for USB endpoint 7 Request */ -#define DRCMR32 0x40000180 /* Request to Channel Map Register for USB endpoint 8 Request */ -#define DRCMR33 0x40000184 /* Request to Channel Map Register for USB endpoint 9 Request */ -#define DRCMR34 0x40000188 /* Reserved */ -#define DRCMR35 0x4000018C /* Request to Channel Map Register for USB endpoint 11 Request */ -#define DRCMR36 0x40000190 /* Request to Channel Map Register for USB endpoint 12 Request */ -#define DRCMR37 0x40000194 /* Request to Channel Map Register for USB endpoint 13 Request */ -#define DRCMR38 0x40000198 /* Request to Channel Map Register for USB endpoint 14 Request */ -#define DRCMR39 0x4000019C /* Reserved */ - -#define DRCMR68 0x40001110 /* Request to Channel Map Register for Camera FIFO 0 Request */ -#define DRCMR69 0x40001114 /* Request to Channel Map Register for Camera FIFO 1 Request */ -#define DRCMR70 0x40001118 /* Request to Channel Map Register for Camera FIFO 2 Request */ - -#define DRCMRRXSADR DRCMR2 -#define DRCMRTXSADR DRCMR3 -#define DRCMRRXBTRBR DRCMR4 -#define DRCMRTXBTTHR DRCMR5 -#define DRCMRRXFFRBR DRCMR6 -#define DRCMRTXFFTHR DRCMR7 -#define DRCMRRXMCDR DRCMR8 -#define DRCMRRXMODR DRCMR9 -#define DRCMRTXMODR DRCMR10 -#define DRCMRRXPCDR DRCMR11 -#define DRCMRTXPCDR DRCMR12 -#define DRCMRRXSSDR DRCMR13 -#define DRCMRTXSSDR DRCMR14 -#define DRCMRRXICDR DRCMR17 -#define DRCMRTXICDR DRCMR18 -#define DRCMRRXSTRBR DRCMR19 -#define DRCMRTXSTTHR DRCMR20 -#define DRCMRRXMMC DRCMR21 -#define DRCMRTXMMC DRCMR22 - -#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */ -#define DRCMR_CHLNUM 0x0f /* mask for Channel Number (read / write) */ - -#define DDADR0 0x40000200 /* DMA Descriptor Address Register Channel 0 */ -#define DSADR0 0x40000204 /* DMA Source Address Register Channel 0 */ -#define DTADR0 0x40000208 /* DMA Target Address Register Channel 0 */ -#define DCMD0 0x4000020c /* DMA Command Address Register Channel 0 */ -#define DDADR1 0x40000210 /* DMA Descriptor Address Register Channel 1 */ -#define DSADR1 0x40000214 /* DMA Source Address Register Channel 1 */ -#define DTADR1 0x40000218 /* DMA Target Address Register Channel 1 */ -#define DCMD1 0x4000021c /* DMA Command Address Register Channel 1 */ -#define DDADR2 0x40000220 /* DMA Descriptor Address Register Channel 2 */ -#define DSADR2 0x40000224 /* DMA Source Address Register Channel 2 */ -#define DTADR2 0x40000228 /* DMA Target Address Register Channel 2 */ -#define DCMD2 0x4000022c /* DMA Command Address Register Channel 2 */ -#define DDADR3 0x40000230 /* DMA Descriptor Address Register Channel 3 */ -#define DSADR3 0x40000234 /* DMA Source Address Register Channel 3 */ -#define DTADR3 0x40000238 /* DMA Target Address Register Channel 3 */ -#define DCMD3 0x4000023c /* DMA Command Address Register Channel 3 */ -#define DDADR4 0x40000240 /* DMA Descriptor Address Register Channel 4 */ -#define DSADR4 0x40000244 /* DMA Source Address Register Channel 4 */ -#define DTADR4 0x40000248 /* DMA Target Address Register Channel 4 */ -#define DCMD4 0x4000024c /* DMA Command Address Register Channel 4 */ -#define DDADR5 0x40000250 /* DMA Descriptor Address Register Channel 5 */ -#define DSADR5 0x40000254 /* DMA Source Address Register Channel 5 */ -#define DTADR5 0x40000258 /* DMA Target Address Register Channel 5 */ -#define DCMD5 0x4000025c /* DMA Command Address Register Channel 5 */ -#define DDADR6 0x40000260 /* DMA Descriptor Address Register Channel 6 */ -#define DSADR6 0x40000264 /* DMA Source Address Register Channel 6 */ -#define DTADR6 0x40000268 /* DMA Target Address Register Channel 6 */ -#define DCMD6 0x4000026c /* DMA Command Address Register Channel 6 */ -#define DDADR7 0x40000270 /* DMA Descriptor Address Register Channel 7 */ -#define DSADR7 0x40000274 /* DMA Source Address Register Channel 7 */ -#define DTADR7 0x40000278 /* DMA Target Address Register Channel 7 */ -#define DCMD7 0x4000027c /* DMA Command Address Register Channel 7 */ -#define DDADR8 0x40000280 /* DMA Descriptor Address Register Channel 8 */ -#define DSADR8 0x40000284 /* DMA Source Address Register Channel 8 */ -#define DTADR8 0x40000288 /* DMA Target Address Register Channel 8 */ -#define DCMD8 0x4000028c /* DMA Command Address Register Channel 8 */ -#define DDADR9 0x40000290 /* DMA Descriptor Address Register Channel 9 */ -#define DSADR9 0x40000294 /* DMA Source Address Register Channel 9 */ -#define DTADR9 0x40000298 /* DMA Target Address Register Channel 9 */ -#define DCMD9 0x4000029c /* DMA Command Address Register Channel 9 */ -#define DDADR10 0x400002a0 /* DMA Descriptor Address Register Channel 10 */ -#define DSADR10 0x400002a4 /* DMA Source Address Register Channel 10 */ -#define DTADR10 0x400002a8 /* DMA Target Address Register Channel 10 */ -#define DCMD10 0x400002ac /* DMA Command Address Register Channel 10 */ -#define DDADR11 0x400002b0 /* DMA Descriptor Address Register Channel 11 */ -#define DSADR11 0x400002b4 /* DMA Source Address Register Channel 11 */ -#define DTADR11 0x400002b8 /* DMA Target Address Register Channel 11 */ -#define DCMD11 0x400002bc /* DMA Command Address Register Channel 11 */ -#define DDADR12 0x400002c0 /* DMA Descriptor Address Register Channel 12 */ -#define DSADR12 0x400002c4 /* DMA Source Address Register Channel 12 */ -#define DTADR12 0x400002c8 /* DMA Target Address Register Channel 12 */ -#define DCMD12 0x400002cc /* DMA Command Address Register Channel 12 */ -#define DDADR13 0x400002d0 /* DMA Descriptor Address Register Channel 13 */ -#define DSADR13 0x400002d4 /* DMA Source Address Register Channel 13 */ -#define DTADR13 0x400002d8 /* DMA Target Address Register Channel 13 */ -#define DCMD13 0x400002dc /* DMA Command Address Register Channel 13 */ -#define DDADR14 0x400002e0 /* DMA Descriptor Address Register Channel 14 */ -#define DSADR14 0x400002e4 /* DMA Source Address Register Channel 14 */ -#define DTADR14 0x400002e8 /* DMA Target Address Register Channel 14 */ -#define DCMD14 0x400002ec /* DMA Command Address Register Channel 14 */ -#define DDADR15 0x400002f0 /* DMA Descriptor Address Register Channel 15 */ -#define DSADR15 0x400002f4 /* DMA Source Address Register Channel 15 */ -#define DTADR15 0x400002f8 /* DMA Target Address Register Channel 15 */ -#define DCMD15 0x400002fc /* DMA Command Address Register Channel 15 */ - -#define DDADR(x) (0x40000200 | ((x) << 4)) -#define DSADR(x) (0x40000204 | ((x) << 4)) -#define DTADR(x) (0x40000208 | ((x) << 4)) -#define DCMD(x) (0x4000020c | ((x) << 4)) - -#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */ -#define DDADR_STOP (1 << 0) /* Stop (read / write) */ - -#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */ -#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */ -#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */ -#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */ -#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */ -#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */ -#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */ -#define DCMD_BURST8 (1 << 16) /* 8 byte burst */ -#define DCMD_BURST16 (2 << 16) /* 16 byte burst */ -#define DCMD_BURST32 (3 << 16) /* 32 byte burst */ -#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */ -#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */ -#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */ -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -/* default combinations */ -#define DCMD_RXPCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) -#define DCMD_RXMCDR (DCMD_INCTRGADDR|DCMD_FLOWSRC|DCMD_BURST32|DCMD_WIDTH4) -#define DCMD_TXPCDR (DCMD_INCSRCADDR|DCMD_FLOWTRG|DCMD_BURST32|DCMD_WIDTH4) - -/******************************************************************************/ -/* - * IrSR (Infrared Selection Register) - */ -#define IrSR_OFFSET 0x20 - -#define IrSR_RXPL_NEG_IS_ZERO (1<<4) -#define IrSR_RXPL_POS_IS_ZERO 0x0 -#define IrSR_TXPL_NEG_IS_ZERO (1<<3) -#define IrSR_TXPL_POS_IS_ZERO 0x0 -#define IrSR_XMODE_PULSE_1_6 (1<<2) -#define IrSR_XMODE_PULSE_3_16 0x0 -#define IrSR_RCVEIR_IR_MODE (1<<1) -#define IrSR_RCVEIR_UART_MODE 0x0 -#define IrSR_XMITIR_IR_MODE (1<<0) -#define IrSR_XMITIR_UART_MODE 0x0 - -#define IrSR_IR_RECEIVE_ON (\ - IrSR_RXPL_NEG_IS_ZERO | \ - IrSR_TXPL_POS_IS_ZERO | \ - IrSR_XMODE_PULSE_3_16 | \ - IrSR_RCVEIR_IR_MODE | \ - IrSR_XMITIR_UART_MODE) - -#define IrSR_IR_TRANSMIT_ON (\ - IrSR_RXPL_NEG_IS_ZERO | \ - IrSR_TXPL_POS_IS_ZERO | \ - IrSR_XMODE_PULSE_3_16 | \ - IrSR_RCVEIR_UART_MODE | \ - IrSR_XMITIR_IR_MODE) - -/* - * Serial Audio Controller - */ -/* FIXME the audio defines collide w/ the SA1111 defines. I don't like these - * short defines because there is too much chance of namespace collision - */ -#define SACR0 0x40400000 /* Global Control Register */ -#define SACR1 0x40400004 /* Serial Audio I 2 S/MSB-Justified Control Register */ -#define SASR0 0x4040000C /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */ -#define SAIMR 0x40400014 /* Serial Audio Interrupt Mask Register */ -#define SAICR 0x40400018 /* Serial Audio Interrupt Clear Register */ -#define SADIV 0x40400060 /* Audio Clock Divider Register. */ -#define SADR 0x40400080 /* Serial Audio Data Register (TX and RX FIFO access Register). */ - -/* - * AC97 Controller registers - */ -#define POCR 0x40500000 /* PCM Out Control Register */ -#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ - -#define PICR 0x40500004 /* PCM In Control Register */ -#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ - -#define MCCR 0x40500008 /* Mic In Control Register */ -#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ - -#define GCR 0x4050000C /* Global Control Register */ -#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ -#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ -#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ -#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ -#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ -#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ -#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ -#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ -#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ -#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ - -#define POSR 0x40500010 /* PCM Out Status Register */ -#define POSR_FIFOE (1 << 4) /* FIFO error */ - -#define PISR 0x40500014 /* PCM In Status Register */ -#define PISR_FIFOE (1 << 4) /* FIFO error */ - -#define MCSR 0x40500018 /* Mic In Status Register */ -#define MCSR_FIFOE (1 << 4) /* FIFO error */ - -#define GSR 0x4050001C /* Global Status Register */ -#define GSR_CDONE (1 << 19) /* Command Done */ -#define GSR_SDONE (1 << 18) /* Status Done */ -#define GSR_RDCS (1 << 15) /* Read Completion Status */ -#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ -#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ -#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ -#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ -#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ -#define GSR_SCR (1 << 9) /* Secondary Codec Ready */ -#define GSR_PCR (1 << 8) /* Primary Codec Ready */ -#define GSR_MINT (1 << 7) /* Mic In Interrupt */ -#define GSR_POINT (1 << 6) /* PCM Out Interrupt */ -#define GSR_PIINT (1 << 5) /* PCM In Interrupt */ -#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ -#define GSR_MIINT (1 << 1) /* Modem In Interrupt */ -#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ - -#define CAR 0x40500020 /* CODEC Access Register */ -#define CAR_CAIP (1 << 0) /* Codec Access In Progress */ - -#define PCDR 0x40500040 /* PCM FIFO Data Register */ -#define MCDR 0x40500060 /* Mic-in FIFO Data Register */ - -#define MOCR 0x40500100 /* Modem Out Control Register */ -#define MOCR_FEIE (1 << 3) /* FIFO Error */ - -#define MICR 0x40500108 /* Modem In Control Register */ -#define MICR_FEIE (1 << 3) /* FIFO Error */ - -#define MOSR 0x40500110 /* Modem Out Status Register */ -#define MOSR_FIFOE (1 << 4) /* FIFO error */ - -#define MISR 0x40500118 /* Modem In Status Register */ -#define MISR_FIFOE (1 << 4) /* FIFO error */ - -#define MODR 0x40500140 /* Modem FIFO Data Register */ - -#define PAC_REG_BASE 0x40500200 /* Primary Audio Codec */ -#define SAC_REG_BASE 0x40500300 /* Secondary Audio Codec */ -#define PMC_REG_BASE 0x40500400 /* Primary Modem Codec */ -#define SMC_REG_BASE 0x40500500 /* Secondary Modem Codec */ - - -/* - * USB Device Controller - */ -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) - -#define UDCCR 0x40600000 /* UDC Control Register */ -#define UDCCR_UDE (1 << 0) /* UDC enable */ -#define UDCCR_UDA (1 << 1) /* UDC active */ -#define UDCCR_RSM (1 << 2) /* Device resume */ -#define UDCCR_EMCE (1 << 3) /* Endpoint Memory Configuration Error */ -#define UDCCR_SMAC (1 << 4) /* Switch Endpoint Memory to Active Configuration */ -#define UDCCR_RESIR (1 << 29) /* Resume interrupt request */ -#define UDCCR_SUSIR (1 << 28) /* Suspend interrupt request */ -#define UDCCR_SM (1 << 28) /* Suspend interrupt mask */ -#define UDCCR_RSTIR (1 << 27) /* Reset interrupt request */ -#define UDCCR_REM (1 << 27) /* Reset interrupt mask */ -#define UDCCR_RM (1 << 29) /* resume interrupt mask */ -#define UDCCR_SRM (UDCCR_SM|UDCCR_RM) -#define UDCCR_OEN (1 << 31) /* On-the-Go Enable */ -#define UDCCR_AALTHNP (1 << 30) /* A-device Alternate Host Negotiation Protocol Port Support */ -#define UDCCR_AHNP (1 << 29) /* A-device Host Negotiation Protocol Support */ -#define UDCCR_BHNP (1 << 28) /* B-device Host Negotiation Protocol Enable */ -#define UDCCR_DWRE (1 << 16) /* Device Remote Wake-up Enable */ -#define UDCCR_ACN (0x03 << 11) /* Active UDC configuration Number */ -#define UDCCR_ACN_S 11 -#define UDCCR_AIN (0x07 << 8) /* Active UDC interface Number */ -#define UDCCR_AIN_S 8 -#define UDCCR_AAISN (0x07 << 5) /* Active UDC Alternate Interface Setting Number */ -#define UDCCR_AAISN_S 5 - -#define UDCCS0 0x40600100 /* UDC Endpoint 0 Control/Status Register */ -#define UDCCS0_OPR (1 << 0) /* OUT packet ready */ -#define UDCCS0_IPR (1 << 1) /* IN packet ready */ -#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS0_DRWF (1 << 16) /* Device remote wakeup feature */ -#define UDCCS0_SST (1 << 4) /* Sent stall */ -#define UDCCS0_FST (1 << 5) /* Force stall */ -#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */ -#define UDCCS0_SA (1 << 7) /* Setup active */ - -/* Bulk IN - Endpoint 1,6,11 */ -#define UDCCS1 0x40600104 /* UDC Endpoint 1 (IN) Control/Status Register */ -#define UDCCS6 0x40600028 /* UDC Endpoint 6 (IN) Control/Status Register */ -#define UDCCS11 0x4060003C /* UDC Endpoint 11 (IN) Control/Status Register */ - -#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_BI_FTF (1 << 8) /* Flush Tx FIFO */ -#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_BI_SST (1 << 4) /* Sent stall */ -#define UDCCS_BI_FST (1 << 5) /* Force stall */ -#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */ - -/* Bulk OUT - Endpoint 2,7,12 */ -#define UDCCS2 0x40600108 /* UDC Endpoint 2 (OUT) Control/Status Register */ -#define UDCCS7 0x4060002C /* UDC Endpoint 7 (OUT) Control/Status Register */ -#define UDCCS12 0x40600040 /* UDC Endpoint 12 (OUT) Control/Status Register */ - -#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_BO_DME (1 << 3) /* DMA enable */ -#define UDCCS_BO_SST (1 << 4) /* Sent stall */ -#define UDCCS_BO_FST (1 << 5) /* Force stall */ -#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */ - -/* Isochronous IN - Endpoint 3,8,13 */ -#define UDCCS3 0x4060001C /* UDC Endpoint 3 (IN) Control/Status Register */ -#define UDCCS8 0x40600030 /* UDC Endpoint 8 (IN) Control/Status Register */ -#define UDCCS13 0x40600044 /* UDC Endpoint 13 (IN) Control/Status Register */ - -#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */ - -/* Isochronous OUT - Endpoint 4,9,14 */ -#define UDCCS4 0x40600020 /* UDC Endpoint 4 (OUT) Control/Status Register */ -#define UDCCS9 0x40600034 /* UDC Endpoint 9 (OUT) Control/Status Register */ -#define UDCCS14 0x40600048 /* UDC Endpoint 14 (OUT) Control/Status Register */ - -#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */ -#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */ -#define UDCCS_IO_ROF (1 << 3) /* Receive overflow */ -#define UDCCS_IO_DME (1 << 3) /* DMA enable */ -#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */ -#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */ - -/* Interrupt IN - Endpoint 5,10,15 */ -#define UDCCS5 0x40600024 /* UDC Endpoint 5 (Interrupt) Control/Status Register */ -#define UDCCS10 0x40600038 /* UDC Endpoint 10 (Interrupt) Control/Status Register */ -#define UDCCS15 0x4060004C /* UDC Endpoint 15 (Interrupt) Control/Status Register */ - -#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */ -#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */ -#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */ -#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */ -#define UDCCS_INT_SST (1 << 4) /* Sent stall */ -#define UDCCS_INT_FST (1 << 5) /* Force stall */ -#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */ - -#define UFNRH 0x40600060 /* UDC Frame Number Register High */ -#define UFNRL 0x40600014 /* UDC Frame Number Register Low */ -#define UBCR2 0x40600208 /* UDC Byte Count Reg 2 */ -#define UBCR4 0x4060006c /* UDC Byte Count Reg 4 */ -#define UBCR7 0x40600070 /* UDC Byte Count Reg 7 */ -#define UBCR9 0x40600074 /* UDC Byte Count Reg 9 */ -#define UBCR12 0x40600078 /* UDC Byte Count Reg 12 */ -#define UBCR14 0x4060007c /* UDC Byte Count Reg 14 */ -#define UDDR0 0x40600300 /* UDC Endpoint 0 Data Register */ -#define UDDR1 0x40600304 /* UDC Endpoint 1 Data Register */ -#define UDDR2 0x40600308 /* UDC Endpoint 2 Data Register */ -#define UDDR3 0x40600200 /* UDC Endpoint 3 Data Register */ -#define UDDR4 0x40600400 /* UDC Endpoint 4 Data Register */ -#define UDDR5 0x406000A0 /* UDC Endpoint 5 Data Register */ -#define UDDR6 0x40600600 /* UDC Endpoint 6 Data Register */ -#define UDDR7 0x40600680 /* UDC Endpoint 7 Data Register */ -#define UDDR8 0x40600700 /* UDC Endpoint 8 Data Register */ -#define UDDR9 0x40600900 /* UDC Endpoint 9 Data Register */ -#define UDDR10 0x406000C0 /* UDC Endpoint 10 Data Register */ -#define UDDR11 0x40600B00 /* UDC Endpoint 11 Data Register */ -#define UDDR12 0x40600B80 /* UDC Endpoint 12 Data Register */ -#define UDDR13 0x40600C00 /* UDC Endpoint 13 Data Register */ -#define UDDR14 0x40600E00 /* UDC Endpoint 14 Data Register */ -#define UDDR15 0x406000E0 /* UDC Endpoint 15 Data Register */ - -#define UICR0 0x40600004 /* UDC Interrupt Control Register 0 */ - -#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */ -#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */ -#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */ -#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */ -#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */ -#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */ -#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */ -#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */ - -#define UICR1 0x40600008 /* UDC Interrupt Control Register 1 */ - -#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */ -#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */ -#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */ -#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */ -#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */ -#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */ -#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */ -#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */ - -#define USIR0 0x4060000C /* UDC Status Interrupt Register 0 */ - -#define USIR0_IR0 (1 << 0) /* Interrup request ep 0 */ -#define USIR0_IR1 (1 << 2) /* Interrup request ep 1 */ -#define USIR0_IR2 (1 << 4) /* Interrup request ep 2 */ -#define USIR0_IR3 (1 << 3) /* Interrup request ep 3 */ -#define USIR0_IR4 (1 << 4) /* Interrup request ep 4 */ -#define USIR0_IR5 (1 << 5) /* Interrup request ep 5 */ -#define USIR0_IR6 (1 << 6) /* Interrup request ep 6 */ -#define USIR0_IR7 (1 << 7) /* Interrup request ep 7 */ - -#define USIR1 0x40600010 /* UDC Status Interrupt Register 1 */ - -#define USIR1_IR8 (1 << 0) /* Interrup request ep 8 */ -#define USIR1_IR9 (1 << 1) /* Interrup request ep 9 */ -#define USIR1_IR10 (1 << 2) /* Interrup request ep 10 */ -#define USIR1_IR11 (1 << 3) /* Interrup request ep 11 */ -#define USIR1_IR12 (1 << 4) /* Interrup request ep 12 */ -#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */ -#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */ -#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */ - - -#define UDCICR0 0x40600004 /* UDC Interrupt Control Register0 */ -#define UDCICR1 0x40600008 /* UDC Interrupt Control Register1 */ -#define UDCICR_FIFOERR (1 << 1) /* FIFO Error interrupt for EP */ -#define UDCICR_PKTCOMPL (1 << 0) /* Packet Complete interrupt for EP */ - -#define UDCICR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCICR1_IECC (1 << 31) /* IntEn - Configuration Change */ -#define UDCICR1_IESOF (1 << 30) /* IntEn - Start of Frame */ -#define UDCICR1_IERU (1 << 29) /* IntEn - Resume */ -#define UDCICR1_IESU (1 << 28) /* IntEn - Suspend */ -#define UDCICR1_IERS (1 << 27) /* IntEn - Reset */ - -#define UDCISR0 0x4060000C /* UDC Interrupt Status Register 0 */ -#define UDCISR1 0x40600010 /* UDC Interrupt Status Register 1 */ -#define UDCISR_INT(n, intr) (((intr) & 0x03) << (((n) & 0x0F) * 2)) -#define UDCISR1_IRCC (1 << 31) /* IntEn - Configuration Change */ -#define UDCISR1_IRSOF (1 << 30) /* IntEn - Start of Frame */ -#define UDCISR1_IRRU (1 << 29) /* IntEn - Resume */ -#define UDCISR1_IRSU (1 << 28) /* IntEn - Suspend */ -#define UDCISR1_IRRS (1 << 27) /* IntEn - Reset */ - - -#define UDCFNR 0x40600014 /* UDC Frame Number Register */ -#define UDCOTGICR 0x40600018 /* UDC On-The-Go interrupt control */ -#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ -#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt Falling Edge Interrupt Enable */ -#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEVV40F (1 << 8) /* OTG Vbus Valid 4.0V Falling Edge Interrupt Enable */ -#define UDCOTGICR_IEVV44R (1 << 7) /* OTG Vbus Valid 4.4V Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEVV44F (1 << 6) /* OTG Vbus Valid 4.4V Falling Edge Interrupt Enable */ -#define UDCOTGICR_IESVR (1 << 5) /* OTG Session Valid Rising Edge Interrupt Enable */ -#define UDCOTGICR_IESVF (1 << 4) /* OTG Session Valid Falling Edge Interrupt Enable */ -#define UDCOTGICR_IESDR (1 << 3) /* OTG A-Device SRP Detect Rising Edge Interrupt Enable */ -#define UDCOTGICR_IESDF (1 << 2) /* OTG A-Device SRP Detect Falling Edge Interrupt Enable */ -#define UDCOTGICR_IEIDR (1 << 1) /* OTG ID Change Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEIDF (1 << 0) /* OTG ID Change Falling Edge Interrupt Enable */ - -#define UDCCSN(x) (0x40600100 + ((x) << 2)) -#define UDCCSR0 0x40600100 /* UDC Control/Status register - Endpoint 0 */ - -#define UDCCSR0_SA (1 << 7) /* Setup Active */ -#define UDCCSR0_RNE (1 << 6) /* Receive FIFO Not Empty */ -#define UDCCSR0_FST (1 << 5) /* Force Stall */ -#define UDCCSR0_SST (1 << 4) /* Sent Stall */ -#define UDCCSR0_DME (1 << 3) /* DMA Enable */ -#define UDCCSR0_FTF (1 << 2) /* Flush Transmit FIFO */ -#define UDCCSR0_IPR (1 << 1) /* IN Packet Ready */ -#define UDCCSR0_OPC (1 << 0) /* OUT Packet Complete */ - -#define UDCCSRA 0x40600104 /* UDC Control/Status register - Endpoint A */ -#define UDCCSRB 0x40600108 /* UDC Control/Status register - Endpoint B */ -#define UDCCSRC 0x4060010C /* UDC Control/Status register - Endpoint C */ -#define UDCCSRD 0x40600110 /* UDC Control/Status register - Endpoint D */ -#define UDCCSRE 0x40600114 /* UDC Control/Status register - Endpoint E */ -#define UDCCSRF 0x40600118 /* UDC Control/Status register - Endpoint F */ -#define UDCCSRG 0x4060011C /* UDC Control/Status register - Endpoint G */ -#define UDCCSRH 0x40600120 /* UDC Control/Status register - Endpoint H */ -#define UDCCSRI 0x40600124 /* UDC Control/Status register - Endpoint I */ -#define UDCCSRJ 0x40600128 /* UDC Control/Status register - Endpoint J */ -#define UDCCSRK 0x4060012C /* UDC Control/Status register - Endpoint K */ -#define UDCCSRL 0x40600130 /* UDC Control/Status register - Endpoint L */ -#define UDCCSRM 0x40600134 /* UDC Control/Status register - Endpoint M */ -#define UDCCSRN 0x40600138 /* UDC Control/Status register - Endpoint N */ -#define UDCCSRP 0x4060013C /* UDC Control/Status register - Endpoint P */ -#define UDCCSRQ 0x40600140 /* UDC Control/Status register - Endpoint Q */ -#define UDCCSRR 0x40600144 /* UDC Control/Status register - Endpoint R */ -#define UDCCSRS 0x40600148 /* UDC Control/Status register - Endpoint S */ -#define UDCCSRT 0x4060014C /* UDC Control/Status register - Endpoint T */ -#define UDCCSRU 0x40600150 /* UDC Control/Status register - Endpoint U */ -#define UDCCSRV 0x40600154 /* UDC Control/Status register - Endpoint V */ -#define UDCCSRW 0x40600158 /* UDC Control/Status register - Endpoint W */ -#define UDCCSRX 0x4060015C /* UDC Control/Status register - Endpoint X */ - -#define UDCCSR_DPE (1 << 9) /* Data Packet Error */ -#define UDCCSR_FEF (1 << 8) /* Flush Endpoint FIFO */ -#define UDCCSR_SP (1 << 7) /* Short Packet Control/Status */ -#define UDCCSR_BNE (1 << 6) /* Buffer Not Empty (IN endpoints) */ -#define UDCCSR_BNF (1 << 6) /* Buffer Not Full (OUT endpoints) */ -#define UDCCSR_FST (1 << 5) /* Force STALL */ -#define UDCCSR_SST (1 << 4) /* Sent STALL */ -#define UDCCSR_DME (1 << 3) /* DMA Enable */ -#define UDCCSR_TRN (1 << 2) /* Tx/Rx NAK */ -#define UDCCSR_PC (1 << 1) /* Packet Complete */ -#define UDCCSR_FS (1 << 0) /* FIFO needs service */ - -#define UDCBCN(x) (0x40600200 + ((x) << 2)) -#define UDCBCR0 0x40600200 /* Byte Count Register - EP0 */ -#define UDCBCRA 0x40600204 /* Byte Count Register - EPA */ -#define UDCBCRB 0x40600208 /* Byte Count Register - EPB */ -#define UDCBCRC 0x4060020C /* Byte Count Register - EPC */ -#define UDCBCRD 0x40600210 /* Byte Count Register - EPD */ -#define UDCBCRE 0x40600214 /* Byte Count Register - EPE */ -#define UDCBCRF 0x40600218 /* Byte Count Register - EPF */ -#define UDCBCRG 0x4060021C /* Byte Count Register - EPG */ -#define UDCBCRH 0x40600220 /* Byte Count Register - EPH */ -#define UDCBCRI 0x40600224 /* Byte Count Register - EPI */ -#define UDCBCRJ 0x40600228 /* Byte Count Register - EPJ */ -#define UDCBCRK 0x4060022C /* Byte Count Register - EPK */ -#define UDCBCRL 0x40600230 /* Byte Count Register - EPL */ -#define UDCBCRM 0x40600234 /* Byte Count Register - EPM */ -#define UDCBCRN 0x40600238 /* Byte Count Register - EPN */ -#define UDCBCRP 0x4060023C /* Byte Count Register - EPP */ -#define UDCBCRQ 0x40600240 /* Byte Count Register - EPQ */ -#define UDCBCRR 0x40600244 /* Byte Count Register - EPR */ -#define UDCBCRS 0x40600248 /* Byte Count Register - EPS */ -#define UDCBCRT 0x4060024C /* Byte Count Register - EPT */ -#define UDCBCRU 0x40600250 /* Byte Count Register - EPU */ -#define UDCBCRV 0x40600254 /* Byte Count Register - EPV */ -#define UDCBCRW 0x40600258 /* Byte Count Register - EPW */ -#define UDCBCRX 0x4060025C /* Byte Count Register - EPX */ - -#define UDCDN(x) (0x40600300 + ((x) << 2)) -#define UDCDR0 0x40600300 /* Data Register - EP0 */ -#define UDCDRA 0x40600304 /* Data Register - EPA */ -#define UDCDRB 0x40600308 /* Data Register - EPB */ -#define UDCDRC 0x4060030C /* Data Register - EPC */ -#define UDCDRD 0x40600310 /* Data Register - EPD */ -#define UDCDRE 0x40600314 /* Data Register - EPE */ -#define UDCDRF 0x40600318 /* Data Register - EPF */ -#define UDCDRG 0x4060031C /* Data Register - EPG */ -#define UDCDRH 0x40600320 /* Data Register - EPH */ -#define UDCDRI 0x40600324 /* Data Register - EPI */ -#define UDCDRJ 0x40600328 /* Data Register - EPJ */ -#define UDCDRK 0x4060032C /* Data Register - EPK */ -#define UDCDRL 0x40600330 /* Data Register - EPL */ -#define UDCDRM 0x40600334 /* Data Register - EPM */ -#define UDCDRN 0x40600338 /* Data Register - EPN */ -#define UDCDRP 0x4060033C /* Data Register - EPP */ -#define UDCDRQ 0x40600340 /* Data Register - EPQ */ -#define UDCDRR 0x40600344 /* Data Register - EPR */ -#define UDCDRS 0x40600348 /* Data Register - EPS */ -#define UDCDRT 0x4060034C /* Data Register - EPT */ -#define UDCDRU 0x40600350 /* Data Register - EPU */ -#define UDCDRV 0x40600354 /* Data Register - EPV */ -#define UDCDRW 0x40600358 /* Data Register - EPW */ -#define UDCDRX 0x4060035C /* Data Register - EPX */ - -#define UDCCN(x) (0x40600400 + ((x) << 2)) -#define UDCCRA 0x40600404 /* Configuration register EPA */ -#define UDCCRB 0x40600408 /* Configuration register EPB */ -#define UDCCRC 0x4060040C /* Configuration register EPC */ -#define UDCCRD 0x40600410 /* Configuration register EPD */ -#define UDCCRE 0x40600414 /* Configuration register EPE */ -#define UDCCRF 0x40600418 /* Configuration register EPF */ -#define UDCCRG 0x4060041C /* Configuration register EPG */ -#define UDCCRH 0x40600420 /* Configuration register EPH */ -#define UDCCRI 0x40600424 /* Configuration register EPI */ -#define UDCCRJ 0x40600428 /* Configuration register EPJ */ -#define UDCCRK 0x4060042C /* Configuration register EPK */ -#define UDCCRL 0x40600430 /* Configuration register EPL */ -#define UDCCRM 0x40600434 /* Configuration register EPM */ -#define UDCCRN 0x40600438 /* Configuration register EPN */ -#define UDCCRP 0x4060043C /* Configuration register EPP */ -#define UDCCRQ 0x40600440 /* Configuration register EPQ */ -#define UDCCRR 0x40600444 /* Configuration register EPR */ -#define UDCCRS 0x40600448 /* Configuration register EPS */ -#define UDCCRT 0x4060044C /* Configuration register EPT */ -#define UDCCRU 0x40600450 /* Configuration register EPU */ -#define UDCCRV 0x40600454 /* Configuration register EPV */ -#define UDCCRW 0x40600458 /* Configuration register EPW */ -#define UDCCRX 0x4060045C /* Configuration register EPX */ - -#define UDCCONR_CN (0x03 << 25) /* Configuration Number */ -#define UDCCONR_CN_S (25) -#define UDCCONR_IN (0x07 << 22) /* Interface Number */ -#define UDCCONR_IN_S (22) -#define UDCCONR_AISN (0x07 << 19) /* Alternate Interface Number */ -#define UDCCONR_AISN_S (19) -#define UDCCONR_EN (0x0f << 15) /* Endpoint Number */ -#define UDCCONR_EN_S (15) -#define UDCCONR_ET (0x03 << 13) /* Endpoint Type: */ -#define UDCCONR_ET_S (13) -#define UDCCONR_ET_INT (0x03 << 13) /* Interrupt */ -#define UDCCONR_ET_BULK (0x02 << 13) /* Bulk */ -#define UDCCONR_ET_ISO (0x01 << 13) /* Isochronous */ -#define UDCCONR_ET_NU (0x00 << 13) /* Not used */ -#define UDCCONR_ED (1 << 12) /* Endpoint Direction */ -#define UDCCONR_MPS (0x3ff << 2) /* Maximum Packet Size */ -#define UDCCONR_MPS_S (2) -#define UDCCONR_DE (1 << 1) /* Double Buffering Enable */ -#define UDCCONR_EE (1 << 0) /* Endpoint Enable */ - - -#define UDC_INT_FIFOERROR (0x2) -#define UDC_INT_PACKETCMP (0x1) -#define UDC_FNR_MASK (0x7ff) -#define UDCCSR_WR_MASK (UDCCSR_DME|UDCCSR_FST) -#define UDC_BCR_MASK (0x3ff) - -#endif /* CONFIG_CPU_PXA27X */ - -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) - -/******************************************************************************/ -/* - * USB Host Controller - */ -#define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */ -#define UHCREV 0x4C000000 -#define UHCHCON 0x4C000004 -#define UHCCOMS 0x4C000008 -#define UHCINTS 0x4C00000C -#define UHCINTE 0x4C000010 -#define UHCINTD 0x4C000014 -#define UHCHCCA 0x4C000018 -#define UHCPCED 0x4C00001C -#define UHCCHED 0x4C000020 -#define UHCCCED 0x4C000024 -#define UHCBHED 0x4C000028 -#define UHCBCED 0x4C00002C -#define UHCDHEAD 0x4C000030 -#define UHCFMI 0x4C000034 -#define UHCFMR 0x4C000038 -#define UHCFMN 0x4C00003C -#define UHCPERS 0x4C000040 -#define UHCLST 0x4C000044 -#define UHCRHDA 0x4C000048 -#define UHCRHDB 0x4C00004C -#define UHCRHS 0x4C000050 -#define UHCRHPS1 0x4C000054 -#define UHCRHPS2 0x4C000058 -#define UHCRHPS3 0x4C00005C -#define UHCSTAT 0x4C000060 -#define UHCHR 0x4C000064 -#define UHCHIE 0x4C000068 -#define UHCHIT 0x4C00006C - -#define UHCCOMS_HCR (1<<0) - -#define UHCHR_FSBIR (1<<0) -#define UHCHR_FHR (1<<1) -#define UHCHR_CGR (1<<2) -#define UHCHR_SSDC (1<<3) -#define UHCHR_UIT (1<<4) -#define UHCHR_SSE (1<<5) -#define UHCHR_PSPL (1<<6) -#define UHCHR_PCPL (1<<7) -#define UHCHR_SSEP0 (1<<9) -#define UHCHR_SSEP1 (1<<10) -#define UHCHR_SSEP2 (1<<11) - -#define UHCHIE_UPRIE (1<<13) -#define UHCHIE_UPS2IE (1<<12) -#define UHCHIE_UPS1IE (1<<11) -#define UHCHIE_TAIE (1<<10) -#define UHCHIE_HBAIE (1<<8) -#define UHCHIE_RWIE (1<<7) - -#define UP2OCR 0x40600020 - -#define UP2OCR_HXOE (1<<17) -#define UP2OCR_HXS (1<<16) -#define UP2OCR_IDON (1<<10) -#define UP2OCR_EXSUS (1<<9) -#define UP2OCR_EXSP (1<<8) -#define UP2OCR_DMSTATE (1<<7) -#define UP2OCR_VPM (1<<6) -#define UP2OCR_DPSTATE (1<<5) -#define UP2OCR_DPPUE (1<<4) -#define UP2OCR_DMPDE (1<<3) -#define UP2OCR_DPPDE (1<<2) -#define UP2OCR_CPVPE (1<<1) -#define UP2OCR_CPVEN (1<<0) - -#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */ - -/******************************************************************************/ -/* - * Fast Infrared Communication Port - */ -#define ICCR0 0x40800000 /* ICP Control Register 0 */ -#define ICCR1 0x40800004 /* ICP Control Register 1 */ -#define ICCR2 0x40800008 /* ICP Control Register 2 */ -#define ICDR 0x4080000c /* ICP Data Register */ -#define ICSR0 0x40800014 /* ICP Status Register 0 */ -#define ICSR1 0x40800018 /* ICP Status Register 1 */ - -/* - * Real Time Clock - */ -#define RCNR 0x40900000 /* RTC Count Register */ -#define RTAR 0x40900004 /* RTC Alarm Register */ -#define RTSR 0x40900008 /* RTC Status Register */ -#define RTTR 0x4090000C /* RTC Timer Trim Register */ -#define RDAR1 0x40900018 /* Wristwatch Day Alarm Reg 1 */ -#define RDAR2 0x40900020 /* Wristwatch Day Alarm Reg 2 */ -#define RYAR1 0x4090001C /* Wristwatch Year Alarm Reg 1 */ -#define RYAR2 0x40900024 /* Wristwatch Year Alarm Reg 2 */ -#define SWAR1 0x4090002C /* Stopwatch Alarm Register 1 */ -#define SWAR2 0x40900030 /* Stopwatch Alarm Register 2 */ -#define PIAR 0x40900038 /* Periodic Interrupt Alarm Register */ -#define RDCR 0x40900010 /* RTC Day Count Register. */ -#define RYCR 0x40900014 /* RTC Year Count Register. */ -#define SWCR 0x40900028 /* Stopwatch Count Register */ -#define RTCPICR 0x40900034 /* Periodic Interrupt Counter Register */ - -#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ -#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ -#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ -#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ -#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ -#define RTSR_AL (1 << 0) /* RTC alarm detected */ - -/******************************************************************************/ -/* - * OS Timer & Match Registers - */ -#define OSMR0 0x40A00000 /* OS Timer Match Register 0 */ -#define OSMR1 0x40A00004 /* OS Timer Match Register 1 */ -#define OSMR2 0x40A00008 /* OS Timer Match Register 2 */ -#define OSMR3 0x40A0000C /* OS Timer Match Register 3 */ -#define OSCR 0x40A00010 /* OS Timer Counter Register */ -#define OSSR 0x40A00014 /* OS Timer Status Register */ -#define OWER 0x40A00018 /* OS Timer Watchdog Enable Register */ -#define OIER 0x40A0001C /* OS Timer Interrupt Enable Register */ - -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) -#define OSCR4 0x40A00040 /* OS Timer Counter Register 4 */ -#define OSCR5 0x40A00044 /* OS Timer Counter Register 5 */ -#define OSCR6 0x40A00048 /* OS Timer Counter Register 6 */ -#define OSCR7 0x40A0004C /* OS Timer Counter Register 7 */ -#define OSCR8 0x40A00050 /* OS Timer Counter Register 8 */ -#define OSCR9 0x40A00054 /* OS Timer Counter Register 9 */ -#define OSCR10 0x40A00058 /* OS Timer Counter Register 10 */ -#define OSCR11 0x40A0005C /* OS Timer Counter Register 11 */ - -#define OSMR4 0x40A00080 /* OS Timer Match Register 4 */ -#define OSMR5 0x40A00084 /* OS Timer Match Register 5 */ -#define OSMR6 0x40A00088 /* OS Timer Match Register 6 */ -#define OSMR7 0x40A0008C /* OS Timer Match Register 7 */ -#define OSMR8 0x40A00090 /* OS Timer Match Register 8 */ -#define OSMR9 0x40A00094 /* OS Timer Match Register 9 */ -#define OSMR10 0x40A00098 /* OS Timer Match Register 10 */ -#define OSMR11 0x40A0009C /* OS Timer Match Register 11 */ - -#define OMCR4 0x40A000C0 /* OS Match Control Register 4 */ -#define OMCR5 0x40A000C4 /* OS Match Control Register 5 */ -#define OMCR6 0x40A000C8 /* OS Match Control Register 6 */ -#define OMCR7 0x40A000CC /* OS Match Control Register 7 */ -#define OMCR8 0x40A000D0 /* OS Match Control Register 8 */ -#define OMCR9 0x40A000D4 /* OS Match Control Register 9 */ -#define OMCR10 0x40A000D8 /* OS Match Control Register 10 */ -#define OMCR11 0x40A000DC /* OS Match Control Register 11 */ - -#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */ - -#define OSSR_M4 (1 << 4) /* Match status channel 4 */ -#define OSSR_M3 (1 << 3) /* Match status channel 3 */ -#define OSSR_M2 (1 << 2) /* Match status channel 2 */ -#define OSSR_M1 (1 << 1) /* Match status channel 1 */ -#define OSSR_M0 (1 << 0) /* Match status channel 0 */ - -#define OWER_WME (1 << 0) /* Watchdog Match Enable */ - -#define OIER_E4 (1 << 4) /* Interrupt enable channel 4 */ -#define OIER_E3 (1 << 3) /* Interrupt enable channel 3 */ -#define OIER_E2 (1 << 2) /* Interrupt enable channel 2 */ -#define OIER_E1 (1 << 1) /* Interrupt enable channel 1 */ -#define OIER_E0 (1 << 0) /* Interrupt enable channel 0 */ - -#define OSCR_CLK_FREQ 3250 - -/******************************************************************************/ -/* - * Core Clock - */ - -#if defined(CONFIG_CPU_MONAHANS) -#define ACCR 0x41340000 /* Application Subsystem Clock Configuration Register */ -#define ACSR 0x41340004 /* Application Subsystem Clock Status Register */ -#define AICSR 0x41340008 /* Application Subsystem Interrupt Control/Status Register */ -#define CKENA 0x4134000C /* A Clock Enable Register */ -#define CKENB 0x41340010 /* B Clock Enable Register */ -#define AC97_DIV 0x41340014 /* AC97 clock divisor value register */ - -#define ACCR_SMC_MASK 0x03800000 /* Static Memory Controller Frequency Select */ -#define ACCR_SRAM_MASK 0x000c0000 /* SRAM Controller Frequency Select */ -#define ACCR_FC_MASK 0x00030000 /* Frequency Change Frequency Select */ -#define ACCR_HSIO_MASK 0x0000c000 /* High Speed IO Frequency Select */ -#define ACCR_DDR_MASK 0x00003000 /* DDR Memory Controller Frequency Select */ -#define ACCR_XN_MASK 0x00000700 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#define ACCR_XL_MASK 0x0000001f /* Crystal Frequency to Memory Frequency Multiplier */ -#define ACCR_XPDIS (1 << 31) -#define ACCR_SPDIS (1 << 30) -#define ACCR_13MEND1 (1 << 27) -#define ACCR_D0CS (1 << 26) -#define ACCR_13MEND2 (1 << 21) -#define ACCR_PCCE (1 << 11) - -#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */ -#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */ -#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */ -#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */ -#define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */ -#define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */ -#define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */ -#define CKENA_23_STUART (1 << 23) /* STUART Unit Clock Enable */ -#define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */ -#define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */ -#define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */ -#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */ -#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */ -#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */ -#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */ -#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */ -#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */ -#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */ -#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */ -#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */ -#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */ -#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */ -#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */ -#define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */ -#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */ -#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */ -#define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ -#define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ - -#define CKENB_9_SYSBUS2 (1 << 9) /* System bus 2 */ -#define CKENB_8_1WIRE (1 << 8) /* One Wire Interface Unit Clock Enable */ -#define CKENB_7_GPIO (1 << 7) /* GPIO Clock Enable */ -#define CKENB_6_IRQ (1 << 6) /* Interrupt Controller Clock Enable */ -#define CKENB_4_I2C (1 << 4) /* I2C Unit Clock Enable */ -#define CKENB_1_PWM1 (1 << 1) /* PWM2 & PWM3 Clock Enable */ -#define CKENB_0_PWM0 (1 << 0) /* PWM0 & PWM1 Clock Enable */ - -#else /* if defined CONFIG_CPU_MONAHANS */ - -#define CCCR 0x41300000 /* Core Clock Configuration Register */ -#define CKEN 0x41300004 /* Clock Enable Register */ -#define OSCC 0x41300008 /* Oscillator Configuration Register */ -#define CCSR 0x4130000C /* Core Clock Status Register */ - -#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ -#define CKEN22_MEMC (1 << 22) /* Memory Controler */ -#define CKEN21_MSHC (1 << 21) /* Memery Stick Host Controller */ -#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ -#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ -#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ -#define CKEN17_MSL (1 << 17) /* MSL Interface Unit Clock Enable */ -#define CKEN15_PWR_I2C (1 << 15) /* PWR_I2C Unit Clock Enable */ -#define CKEN9_OST (1 << 9) /* OS Timer Unit Clock Enable */ -#define CKEN4_SSP3 (1 << 4) /* SSP3 Unit Clock Enable */ - -#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#if !defined(CONFIG_CPU_PXA27X) -#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ -#endif -#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ - -#define CKEN24_CAMERA (1 << 24) /* Camera Interface Clock Enable */ -#define CKEN23_SSP1 (1 << 23) /* SSP1 Unit Clock Enable */ -#define CKEN22_MEMC (1 << 22) /* Memory Controller Clock Enable */ -#define CKEN21_MEMSTK (1 << 21) /* Memory Stick Host Controller */ -#define CKEN20_IM (1 << 20) /* Internal Memory Clock Enable */ -#define CKEN19_KEYPAD (1 << 19) /* Keypad Interface Clock Enable */ -#define CKEN18_USIM (1 << 18) /* USIM Unit Clock Enable */ -#define CKEN17_MSL (1 << 17) /* MSL Unit Clock Enable */ -#define CKEN16_LCD (1 << 16) /* LCD Unit Clock Enable */ -#define CKEN15_PWRI2C (1 << 15) /* PWR I2C Unit Clock Enable */ -#define CKEN14_I2C (1 << 14) /* I2C Unit Clock Enable */ -#define CKEN13_FICP (1 << 13) /* FICP Unit Clock Enable */ -#define CKEN12_MMC (1 << 12) /* MMC Unit Clock Enable */ -#define CKEN11_USB (1 << 11) /* USB Unit Clock Enable */ -#if defined(CONFIG_CPU_PXA27X) -#define CKEN10_USBHOST (1 << 10) /* USB Host Unit Clock Enable */ -#define CKEN24_CAMERA (1 << 24) /* Camera Unit Clock Enable */ -#endif -#define CKEN8_I2S (1 << 8) /* I2S Unit Clock Enable */ -#define CKEN7_BTUART (1 << 7) /* BTUART Unit Clock Enable */ -#define CKEN6_FFUART (1 << 6) /* FFUART Unit Clock Enable */ -#define CKEN5_STUART (1 << 5) /* STUART Unit Clock Enable */ -#define CKEN3_SSP (1 << 3) /* SSP Unit Clock Enable */ -#define CKEN2_AC97 (1 << 2) /* AC97 Unit Clock Enable */ -#define CKEN1_PWM1 (1 << 1) /* PWM1 Clock Enable */ -#define CKEN0_PWM0 (1 << 0) /* PWM0 Clock Enable */ - -#define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ -#define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ - -#if !defined(CONFIG_CPU_PXA27X) -#define CCCR_L09 (0x1F) -#define CCCR_L27 (0x1) -#define CCCR_L32 (0x2) -#define CCCR_L36 (0x3) -#define CCCR_L40 (0x4) -#define CCCR_L45 (0x5) - -#define CCCR_M1 (0x1 << 5) -#define CCCR_M2 (0x2 << 5) -#define CCCR_M4 (0x3 << 5) - -#define CCCR_N10 (0x2 << 7) -#define CCCR_N15 (0x3 << 7) -#define CCCR_N20 (0x4 << 7) -#define CCCR_N25 (0x5 << 7) -#define CCCR_N30 (0x6 << 7) -#endif - -#endif /* CONFIG_CPU_MONAHANS */ - -/******************************************************************************/ -/* - * Pulse Width Modulator - */ -#define PWM_CTRL0 0x40B00000 /* PWM 0 Control Register */ -#define PWM_PWDUTY0 0x40B00004 /* PWM 0 Duty Cycle Register */ -#define PWM_PERVAL0 0x40B00008 /* PWM 0 Period Control Register */ - -#define PWM_CTRL1 0x40C00000 /* PWM 1 Control Register */ -#define PWM_PWDUTY1 0x40C00004 /* PWM 1 Duty Cycle Register */ -#define PWM_PERVAL1 0x40C00008 /* PWM 1 Period Control Register */ - -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) -#define PWM_CTRL2 0x40B00010 /* PWM 2 Control Register */ -#define PWM_PWDUTY2 0x40B00014 /* PWM 2 Duty Cycle Register */ -#define PWM_PERVAL2 0x40B00018 /* PWM 2 Period Control Register */ - -#define PWM_CTRL3 0x40C00010 /* PWM 3 Control Register */ -#define PWM_PWDUTY3 0x40C00014 /* PWM 3 Duty Cycle Register */ -#define PWM_PERVAL3 0x40C00018 /* PWM 3 Period Control Register */ -#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */ - -/* - * Interrupt Controller - */ -#define ICIP 0x40D00000 /* Interrupt Controller IRQ Pending Register */ -#define ICMR 0x40D00004 /* Interrupt Controller Mask Register */ -#define ICLR 0x40D00008 /* Interrupt Controller Level Register */ -#define ICFP 0x40D0000C /* Interrupt Controller FIQ Pending Register */ -#define ICPR 0x40D00010 /* Interrupt Controller Pending Register */ -#define ICCR 0x40D00014 /* Interrupt Controller Control Register */ - -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) -#define ICHP 0x40D00018 /* Interrupt Controller Highest Priority Register */ -#define ICIP2 0x40D0009C /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 0x40D000A0 /* Interrupt Controller Mask Register 2 */ -#define ICLR2 0x40D000A4 /* Interrupt Controller Level Register 2 */ -#define ICFP2 0x40D000A8 /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 0x40D000AC /* Interrupt Controller Pending Register 2 */ -#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */ - -/******************************************************************************/ -/* - * General Purpose I/O - */ -#define GPLR0 0x40E00000 /* GPIO Pin-Level Register GPIO<31:0> */ -#define GPLR1 0x40E00004 /* GPIO Pin-Level Register GPIO<63:32> */ -#define GPLR2 0x40E00008 /* GPIO Pin-Level Register GPIO<80:64> */ - -#define GPDR0 0x40E0000C /* GPIO Pin Direction Register GPIO<31:0> */ -#define GPDR1 0x40E00010 /* GPIO Pin Direction Register GPIO<63:32> */ -#define GPDR2 0x40E00014 /* GPIO Pin Direction Register GPIO<80:64> */ - -#define GPSR0 0x40E00018 /* GPIO Pin Output Set Register GPIO<31:0> */ -#define GPSR1 0x40E0001C /* GPIO Pin Output Set Register GPIO<63:32> */ -#define GPSR2 0x40E00020 /* GPIO Pin Output Set Register GPIO<80:64> */ - -#define GPCR0 0x40E00024 /* GPIO Pin Output Clear Register GPIO<31:0> */ -#define GPCR1 0x40E00028 /* GPIO Pin Output Clear Register GPIO <63:32> */ -#define GPCR2 0x40E0002C /* GPIO Pin Output Clear Register GPIO <80:64> */ - -#define GRER0 0x40E00030 /* GPIO Rising-Edge Detect Register GPIO<31:0> */ -#define GRER1 0x40E00034 /* GPIO Rising-Edge Detect Register GPIO<63:32> */ -#define GRER2 0x40E00038 /* GPIO Rising-Edge Detect Register GPIO<80:64> */ - -#define GFER0 0x40E0003C /* GPIO Falling-Edge Detect Register GPIO<31:0> */ -#define GFER1 0x40E00040 /* GPIO Falling-Edge Detect Register GPIO<63:32> */ -#define GFER2 0x40E00044 /* GPIO Falling-Edge Detect Register GPIO<80:64> */ - -#define GEDR0 0x40E00048 /* GPIO Edge Detect Status Register GPIO<31:0> */ -#define GEDR1 0x40E0004C /* GPIO Edge Detect Status Register GPIO<63:32> */ -#define GEDR2 0x40E00050 /* GPIO Edge Detect Status Register GPIO<80:64> */ - -#define GAFR0_L 0x40E00054 /* GPIO Alternate Function Select Register GPIO<15:0> */ -#define GAFR0_U 0x40E00058 /* GPIO Alternate Function Select Register GPIO<31:16> */ -#define GAFR1_L 0x40E0005C /* GPIO Alternate Function Select Register GPIO<47:32> */ -#define GAFR1_U 0x40E00060 /* GPIO Alternate Function Select Register GPIO<63:48> */ -#define GAFR2_L 0x40E00064 /* GPIO Alternate Function Select Register GPIO<79:64> */ -#define GAFR2_U 0x40E00068 /* GPIO Alternate Function Select Register GPIO 80 */ - -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) -#define GPLR3 0x40E00100 /* GPIO Pin-Level Register GPIO<127:96> */ -#define GPDR3 0x40E0010C /* GPIO Pin Direction Register GPIO<127:96> */ -#define GPSR3 0x40E00118 /* GPIO Pin Output Set Register GPIO<127:96> */ -#define GPCR3 0x40E00124 /* GPIO Pin Output Clear Register GPIO<127:96> */ -#define GRER3 0x40E00130 /* GPIO Rising-Edge Detect Register GPIO<127:96> */ -#define GFER3 0x40E0013C /* GPIO Falling-Edge Detect Register GPIO<127:96> */ -#define GEDR3 0x40E00148 /* GPIO Edge Detect Status Register GPIO<127:96> */ -#define GAFR3_L 0x40E0006C /* GPIO Alternate Function Select Register GPIO<111:96> */ -#define GAFR3_U 0x40E00070 /* GPIO Alternate Function Select Register GPIO<127:112> */ -#endif /* CONFIG_CPU_PXA27X || CONFIG_CPU_MONAHANS */ - -#ifdef CONFIG_CPU_MONAHANS -#define GSDR0 0x40E00400 /* Bit-wise Set of GPDR[31:0] */ -#define GSDR1 0x40E00404 /* Bit-wise Set of GPDR[63:32] */ -#define GSDR2 0x40E00408 /* Bit-wise Set of GPDR[95:64] */ -#define GSDR3 0x40E0040C /* Bit-wise Set of GPDR[127:96] */ - -#define GCDR0 0x40E00420 /* Bit-wise Clear of GPDR[31:0] */ -#define GCDR1 0x40E00424 /* Bit-wise Clear of GPDR[63:32] */ -#define GCDR2 0x40E00428 /* Bit-wise Clear of GPDR[95:64] */ -#define GCDR3 0x40E0042C /* Bit-wise Clear of GPDR[127:96] */ - -#define GSRER0 0x40E00440 /* Set Rising Edge Det. Enable [31:0] */ -#define GSRER1 0x40E00444 /* Set Rising Edge Det. Enable [63:32] */ -#define GSRER2 0x40E00448 /* Set Rising Edge Det. Enable [95:64] */ -#define GSRER3 0x40E0044C /* Set Rising Edge Det. Enable [127:96] */ - -#define GCRER0 0x40E00460 /* Clear Rising Edge Det. Enable [31:0] */ -#define GCRER1 0x40E00464 /* Clear Rising Edge Det. Enable [63:32] */ -#define GCRER2 0x40E00468 /* Clear Rising Edge Det. Enable [95:64] */ -#define GCRER3 0x40E0046C /* Clear Rising Edge Det. Enable[127:96] */ - -#define GSFER0 0x40E00480 /* Set Falling Edge Det. Enable [31:0] */ -#define GSFER1 0x40E00484 /* Set Falling Edge Det. Enable [63:32] */ -#define GSFER2 0x40E00488 /* Set Falling Edge Det. Enable [95:64] */ -#define GSFER3 0x40E0048C /* Set Falling Edge Det. Enable[127:96] */ - -#define GCFER0 0x40E004A0 /* Clr Falling Edge Det. Enable [31:0] */ -#define GCFER1 0x40E004A4 /* Clr Falling Edge Det. Enable [63:32] */ -#define GCFER2 0x40E004A8 /* Clr Falling Edge Det. Enable [95:64] */ -#define GCFER3 0x40E004AC /* Clr Falling Edge Det. Enable[127:96] */ - -#define GSDR(x) (0x40E00400 | ((x) & 0x60) >> 3) -#define GCDR(x) (0x40E00420 | ((x) & 0x60) >> 3) -#endif - -#define _GPLR(x) (0x40E00000 + (((x) & 0x60) >> 3)) -#define _GPDR(x) (0x40E0000C + (((x) & 0x60) >> 3)) -#define _GPSR(x) (0x40E00018 + (((x) & 0x60) >> 3)) -#define _GPCR(x) (0x40E00024 + (((x) & 0x60) >> 3)) -#define _GRER(x) (0x40E00030 + (((x) & 0x60) >> 3)) -#define _GFER(x) (0x40E0003C + (((x) & 0x60) >> 3)) -#define _GEDR(x) (0x40E00048 + (((x) & 0x60) >> 3)) -#define _GAFR(x) (0x40E00054 + (((x) & 0x70) >> 2)) - -#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS) -#define GPLR(x) (((((x) & 0x7f) < 96) ? _GPLR(x) : GPLR3)) -#define GPDR(x) (((((x) & 0x7f) < 96) ? _GPDR(x) : GPDR3)) -#define GPSR(x) (((((x) & 0x7f) < 96) ? _GPSR(x) : GPSR3)) -#define GPCR(x) (((((x) & 0x7f) < 96) ? _GPCR(x) : GPCR3)) -#define GRER(x) (((((x) & 0x7f) < 96) ? _GRER(x) : GRER3)) -#define GFER(x) (((((x) & 0x7f) < 96) ? _GFER(x) : GFER3)) -#define GEDR(x) (((((x) & 0x7f) < 96) ? _GEDR(x) : GEDR3)) -#define GAFR(x) (((((x) & 0x7f) < 96) ? _GAFR(x) : \ - ((((x) & 0x7f) < 112) ? GAFR3_L : GAFR3_U))) -#else -#define GPLR(x) _GPLR(x) -#define GPDR(x) _GPDR(x) -#define GPSR(x) _GPSR(x) -#define GPCR(x) _GPCR(x) -#define GRER(x) _GRER(x) -#define GFER(x) _GFER(x) -#define GEDR(x) _GEDR(x) -#define GAFR(x) _GAFR(x) -#endif - -#define GPIO_bit(x) (1 << ((x) & 0x1f)) - -/******************************************************************************/ -/* - * Multi-function Pin Registers: - */ -/* PXA320 */ -#if defined(CONFIG_CPU_PXA320) -#define DF_IO0 0x40e1024c -#define DF_IO1 0x40e10254 -#define DF_IO2 0x40e1025c -#define DF_IO3 0x40e10264 -#define DF_IO4 0x40e1026c -#define DF_IO5 0x40e10274 -#define DF_IO6 0x40e1027c -#define DF_IO7 0x40e10284 -#define DF_IO8 0x40e10250 -#define DF_IO9 0x40e10258 -#define DF_IO10 0x40e10260 -#define DF_IO11 0x40e10268 -#define DF_IO12 0x40e10270 -#define DF_IO13 0x40e10278 -#define DF_IO14 0x40e10280 -#define DF_IO15 0x40e10288 -#define DF_CLE_nOE 0x40e10204 -#define DF_ALE_nWE1 0x40e10208 -#define DF_ALE_nWE2 0x40e1021c -#define DF_SCLK_E 0x40e10210 -#define DF_nCS0 0x40e10224 -#define DF_nCS1 0x40e10228 -#define nBE0 0x40e10214 -#define nBE1 0x40e10218 -#define nLUA 0x40e10234 -#define nLLA 0x40e10238 -#define DF_ADDR0 0x40e1023c -#define DF_ADDR1 0x40e10240 -#define DF_ADDR2 0x40e10244 -#define DF_ADDR3 0x40e10248 -#define DF_INT_RnB 0x40e10220 -#define DF_nCS0 0x40e10224 -#define DF_nCS1 0x40e10228 -#define DF_nWE 0x40e1022c -#define DF_nRE 0x40e10230 - -#define nXCVREN 0x40e10138 - -#define GPIO0 0x40e10124 -#define GPIO1 0x40e10128 -#define GPIO2 0x40e1012c -#define GPIO3 0x40e10130 -#define GPIO4 0x40e10134 -#define GPIO5 0x40e1028c -#define GPIO6 0x40e10290 -#define GPIO7 0x40e10294 -#define GPIO8 0x40e10298 -#define GPIO9 0x40e1029c -#define GPIO10 0x40e10458 -#define GPIO11 0x40e102a0 -#define GPIO12 0x40e102a4 -#define GPIO13 0x40e102a8 -#define GPIO14 0x40e102ac -#define GPIO15 0x40e102b0 -#define GPIO16 0x40e102b4 -#define GPIO17 0x40e102b8 -#define GPIO18 0x40e102bc -#define GPIO19 0x40e102c0 -#define GPIO20 0x40e102c4 -#define GPIO21 0x40e102c8 -#define GPIO22 0x40e102cc -#define GPIO23 0x40e102d0 -#define GPIO24 0x40e102d4 -#define GPIO25 0x40e102d8 -#define GPIO26 0x40e102dc - -#define GPIO27 0x40e10400 -#define GPIO28 0x40e10404 -#define GPIO29 0x40e10408 -#define GPIO30 0x40e1040c -#define GPIO31 0x40e10410 -#define GPIO32 0x40e10414 -#define GPIO33 0x40e10418 -#define GPIO34 0x40e1041c -#define GPIO35 0x40e10420 -#define GPIO36 0x40e10424 -#define GPIO37 0x40e10428 -#define GPIO38 0x40e1042c -#define GPIO39 0x40e10430 -#define GPIO40 0x40e10434 -#define GPIO41 0x40e10438 -#define GPIO42 0x40e1043c -#define GPIO43 0x40e10440 -#define GPIO44 0x40e10444 -#define GPIO45 0x40e10448 -#define GPIO46 0x40e1044c -#define GPIO47 0x40e10450 -#define GPIO48 0x40e10454 -#define GPIO49 0x40e1045c -#define GPIO50 0x40e10460 -#define GPIO51 0x40e10464 -#define GPIO52 0x40e10468 -#define GPIO53 0x40e1046c -#define GPIO54 0x40e10470 -#define GPIO55 0x40e10474 -#define GPIO56 0x40e10478 -#define GPIO57 0x40e1047c -#define GPIO58 0x40e10480 -#define GPIO59 0x40e10484 -#define GPIO60 0x40e10488 -#define GPIO61 0x40e1048c -#define GPIO62 0x40e10490 - -#define GPIO6_2 0x40e10494 -#define GPIO7_2 0x40e10498 -#define GPIO8_2 0x40e1049c -#define GPIO9_2 0x40e104a0 -#define GPIO10_2 0x40e104a4 -#define GPIO11_2 0x40e104a8 -#define GPIO12_2 0x40e104ac -#define GPIO13_2 0x40e104b0 - -#define GPIO63 0x40e104b4 -#define GPIO64 0x40e104b8 -#define GPIO65 0x40e104bc -#define GPIO66 0x40e104c0 -#define GPIO67 0x40e104c4 -#define GPIO68 0x40e104c8 -#define GPIO69 0x40e104cc -#define GPIO70 0x40e104d0 -#define GPIO71 0x40e104d4 -#define GPIO72 0x40e104d8 -#define GPIO73 0x40e104dc - -#define GPIO14_2 0x40e104e0 -#define GPIO15_2 0x40e104e4 -#define GPIO16_2 0x40e104e8 -#define GPIO17_2 0x40e104ec - -#define GPIO74 0x40e104f0 -#define GPIO75 0x40e104f4 -#define GPIO76 0x40e104f8 -#define GPIO77 0x40e104fc -#define GPIO78 0x40e10500 -#define GPIO79 0x40e10504 -#define GPIO80 0x40e10508 -#define GPIO81 0x40e1050c -#define GPIO82 0x40e10510 -#define GPIO83 0x40e10514 -#define GPIO84 0x40e10518 -#define GPIO85 0x40e1051c -#define GPIO86 0x40e10520 -#define GPIO87 0x40e10524 -#define GPIO88 0x40e10528 -#define GPIO89 0x40e1052c -#define GPIO90 0x40e10530 -#define GPIO91 0x40e10534 -#define GPIO92 0x40e10538 -#define GPIO93 0x40e1053c -#define GPIO94 0x40e10540 -#define GPIO95 0x40e10544 -#define GPIO96 0x40e10548 -#define GPIO97 0x40e1054c -#define GPIO98 0x40e10550 - -#define GPIO99 0x40e10600 -#define GPIO100 0x40e10604 -#define GPIO101 0x40e10608 -#define GPIO102 0x40e1060c -#define GPIO103 0x40e10610 -#define GPIO104 0x40e10614 -#define GPIO105 0x40e10618 -#define GPIO106 0x40e1061c -#define GPIO107 0x40e10620 -#define GPIO108 0x40e10624 -#define GPIO109 0x40e10628 -#define GPIO110 0x40e1062c -#define GPIO111 0x40e10630 -#define GPIO112 0x40e10634 - -#define GPIO113 0x40e10638 -#define GPIO114 0x40e1063c -#define GPIO115 0x40e10640 -#define GPIO116 0x40e10644 -#define GPIO117 0x40e10648 -#define GPIO118 0x40e1064c -#define GPIO119 0x40e10650 -#define GPIO120 0x40e10654 -#define GPIO121 0x40e10658 -#define GPIO122 0x40e1065c -#define GPIO123 0x40e10660 -#define GPIO124 0x40e10664 -#define GPIO125 0x40e10668 -#define GPIO126 0x40e1066c -#define GPIO127 0x40e10670 - -#define GPIO0_2 0x40e10674 -#define GPIO1_2 0x40e10678 -#define GPIO2_2 0x40e1067c -#define GPIO3_2 0x40e10680 -#define GPIO4_2 0x40e10684 -#define GPIO5_2 0x40e10688 - -/* PXA300 and PXA310 */ -#elif defined(CONFIG_CPU_PXA300) || defined(CONFIG_CPU_PXA310) -#define DF_IO0 0x40e10220 -#define DF_IO1 0x40e10228 -#define DF_IO2 0x40e10230 -#define DF_IO3 0x40e10238 -#define DF_IO4 0x40e10258 -#define DF_IO5 0x40e10260 -#define DF_IO7 0x40e10270 -#define DF_IO6 0x40e10268 -#define DF_IO8 0x40e10224 -#define DF_IO9 0x40e1022c -#define DF_IO10 0x40e10234 -#define DF_IO11 0x40e1023c -#define DF_IO12 0x40e1025c -#define DF_IO13 0x40e10264 -#define DF_IO14 0x40e1026c -#define DF_IO15 0x40e10274 -#define DF_CLE_NOE 0x40e10240 -#define DF_ALE_nWE 0x40e1020c -#define DF_SCLK_E 0x40e10250 -#define nCS0 0x40e100c4 -#define nCS1 0x40e100c0 -#define nBE0 0x40e10204 -#define nBE1 0x40e10208 -#define nLUA 0x40e10244 -#define nLLA 0x40e10254 -#define DF_ADDR0 0x40e10210 -#define DF_ADDR1 0x40e10214 -#define DF_ADDR2 0x40e10218 -#define DF_ADDR3 0x40e1021c -#define DF_INT_RnB 0x40e100c8 -#define DF_nCS0 0x40e10248 -#define DF_nCS1 0x40e10278 -#define DF_nWE 0x40e100cc -#define DF_nRE 0x40e10200 - -#define GPIO0 0x40e100b4 -#define GPIO1 0x40e100b8 -#define GPIO2 0x40e100bc -#define GPIO3 0x40e1027c -#define GPIO4 0x40e10280 - -#define GPIO5 0x40e10284 -#define GPIO6 0x40e10288 -#define GPIO7 0x40e1028c -#define GPIO8 0x40e10290 -#define GPIO9 0x40e10294 -#define GPIO10 0x40e10298 -#define GPIO11 0x40e1029c -#define GPIO12 0x40e102a0 -#define GPIO13 0x40e102a4 -#define GPIO14 0x40e102a8 -#define GPIO15 0x40e102ac -#define GPIO16 0x40e102b0 -#define GPIO17 0x40e102b4 -#define GPIO18 0x40e102b8 -#define GPIO19 0x40e102bc -#define GPIO20 0x40e102c0 -#define GPIO21 0x40e102c4 -#define GPIO22 0x40e102c8 -#define GPIO23 0x40e102cc -#define GPIO24 0x40e102d0 -#define GPIO25 0x40e102d4 -#define GPIO26 0x40e102d8 - -#define GPIO27 0x40e10400 -#define GPIO28 0x40e10404 -#define GPIO29 0x40e10408 -#define ULPI_STP 0x40e1040c -#define ULPI_NXT 0x40e10410 -#define ULPI_DIR 0x40e10414 -#define GPIO30 0x40e10418 -#define GPIO31 0x40e1041c -#define GPIO32 0x40e10420 -#define GPIO33 0x40e10424 -#define GPIO34 0x40e10428 -#define GPIO35 0x40e1042c -#define GPIO36 0x40e10430 -#define GPIO37 0x40e10434 -#define GPIO38 0x40e10438 -#define GPIO39 0x40e1043c -#define GPIO40 0x40e10440 -#define GPIO41 0x40e10444 -#define GPIO42 0x40e10448 -#define GPIO43 0x40e1044c -#define GPIO44 0x40e10450 -#define GPIO45 0x40e10454 -#define GPIO46 0x40e10458 -#define GPIO47 0x40e1045c -#define GPIO48 0x40e10460 - -#define GPIO49 0x40e10464 -#define GPIO50 0x40e10468 -#define GPIO51 0x40e1046c -#define GPIO52 0x40e10470 -#define GPIO53 0x40e10474 -#define GPIO54 0x40e10478 -#define GPIO55 0x40e1047c -#define GPIO56 0x40e10480 -#define GPIO57 0x40e10484 -#define GPIO58 0x40e10488 -#define GPIO59 0x40e1048c -#define GPIO60 0x40e10490 -#define GPIO61 0x40e10494 -#define GPIO62 0x40e10498 -#define GPIO63 0x40e1049c -#define GPIO64 0x40e104a0 -#define GPIO65 0x40e104a4 -#define GPIO66 0x40e104a8 -#define GPIO67 0x40e104ac -#define GPIO68 0x40e104b0 -#define GPIO69 0x40e104b4 -#define GPIO70 0x40e104b8 -#define GPIO71 0x40e104bc -#define GPIO72 0x40e104c0 -#define GPIO73 0x40e104c4 -#define GPIO74 0x40e104c8 -#define GPIO75 0x40e104cc -#define GPIO76 0x40e104d0 -#define GPIO77 0x40e104d4 -#define GPIO78 0x40e104d8 -#define GPIO79 0x40e104dc -#define GPIO80 0x40e104e0 -#define GPIO81 0x40e104e4 -#define GPIO82 0x40e104e8 -#define GPIO83 0x40e104ec -#define GPIO84 0x40e104f0 -#define GPIO85 0x40e104f4 -#define GPIO86 0x40e104f8 -#define GPIO87 0x40e104fc -#define GPIO88 0x40e10500 -#define GPIO89 0x40e10504 -#define GPIO90 0x40e10508 -#define GPIO91 0x40e1050c -#define GPIO92 0x40e10510 -#define GPIO93 0x40e10514 -#define GPIO94 0x40e10518 -#define GPIO95 0x40e1051c -#define GPIO96 0x40e10520 -#define GPIO97 0x40e10524 -#define GPIO98 0x40e10528 - -#define GPIO99 0x40e10600 -#define GPIO100 0x40e10604 -#define GPIO101 0x40e10608 -#define GPIO102 0x40e1060c -#define GPIO103 0x40e10610 -#define GPIO104 0x40e10614 -#define GPIO105 0x40e10618 -#define GPIO106 0x40e1061c -#define GPIO107 0x40e10620 -#define GPIO108 0x40e10624 -#define GPIO109 0x40e10628 -#define GPIO110 0x40e1062c -#define GPIO111 0x40e10630 -#define GPIO112 0x40e10634 - -#define GPIO113 0x40e10638 -#define GPIO114 0x40e1063c -#define GPIO115 0x40e10640 -#define GPIO116 0x40e10644 -#define GPIO117 0x40e10648 -#define GPIO118 0x40e1064c -#define GPIO119 0x40e10650 -#define GPIO120 0x40e10654 -#define GPIO121 0x40e10658 -#define GPIO122 0x40e1065c -#define GPIO123 0x40e10660 -#define GPIO124 0x40e10664 -#define GPIO125 0x40e10668 -#define GPIO126 0x40e1066c -#define GPIO127 0x40e10670 - -#define GPIO0_2 0x40e10674 -#define GPIO1_2 0x40e10678 -#define GPIO2_2 0x40e102dc -#define GPIO3_2 0x40e102e0 -#define GPIO4_2 0x40e102e4 -#define GPIO5_2 0x40e102e8 -#define GPIO6_2 0x40e102ec - -#ifndef CONFIG_CPU_PXA300 /* PXA310 only */ -#define GPIO7_2 0x40e1052c -#define GPIO8_2 0x40e10530 -#define GPIO9_2 0x40e10534 -#define GPIO10_2 0x40e10538 -#endif -#endif - -#ifdef CONFIG_CPU_MONAHANS -/* MFPR Bit Definitions, see 4-10, Vol. 1 */ -#define PULL_SEL 0x8000 -#define PULLUP_EN 0x4000 -#define PULLDOWN_EN 0x2000 - -#define DRIVE_FAST_1mA 0x0 -#define DRIVE_FAST_2mA 0x400 -#define DRIVE_FAST_3mA 0x800 -#define DRIVE_FAST_4mA 0xC00 -#define DRIVE_SLOW_6mA 0x1000 -#define DRIVE_FAST_6mA 0x1400 -#define DRIVE_SLOW_10mA 0x1800 -#define DRIVE_FAST_10mA 0x1C00 - -#define SLEEP_SEL 0x200 -#define SLEEP_DATA 0x100 -#define SLEEP_OE_N 0x80 -#define EDGE_CLEAR 0x40 -#define EDGE_FALL_EN 0x20 -#define EDGE_RISE_EN 0x10 - -#define AF_SEL_0 0x0 /* Alternate function 0 (reset state) */ -#define AF_SEL_1 0x1 /* Alternate function 1 */ -#define AF_SEL_2 0x2 /* Alternate function 2 */ -#define AF_SEL_3 0x3 /* Alternate function 3 */ -#define AF_SEL_4 0x4 /* Alternate function 4 */ -#define AF_SEL_5 0x5 /* Alternate function 5 */ -#define AF_SEL_6 0x6 /* Alternate function 6 */ -#define AF_SEL_7 0x7 /* Alternate function 7 */ - -#endif /* CONFIG_CPU_MONAHANS */ - -/* GPIO alternate function assignments */ - -#define GPIO1_RST 1 /* reset */ -#define GPIO6_MMCCLK 6 /* MMC Clock */ -#define GPIO8_48MHz 7 /* 48 MHz clock output */ -#define GPIO8_MMCCS0 8 /* MMC Chip Select 0 */ -#define GPIO9_MMCCS1 9 /* MMC Chip Select 1 */ -#define GPIO10_RTCCLK 10 /* real time clock (1 Hz) */ -#define GPIO11_3_6MHz 11 /* 3.6 MHz oscillator out */ -#define GPIO12_32KHz 12 /* 32 kHz out */ -#define GPIO13_MBGNT 13 /* memory controller grant */ -#define GPIO14_MBREQ 14 /* alternate bus master request */ -#define GPIO15_nCS_1 15 /* chip select 1 */ -#define GPIO16_PWM0 16 /* PWM0 output */ -#define GPIO17_PWM1 17 /* PWM1 output */ -#define GPIO18_RDY 18 /* Ext. Bus Ready */ -#define GPIO19_DREQ1 19 /* External DMA Request */ -#define GPIO20_DREQ0 20 /* External DMA Request */ -#define GPIO23_SCLK 23 /* SSP clock */ -#define GPIO24_SFRM 24 /* SSP Frame */ -#define GPIO25_STXD 25 /* SSP transmit */ -#define GPIO26_SRXD 26 /* SSP receive */ -#define GPIO27_SEXTCLK 27 /* SSP ext_clk */ -#define GPIO28_BITCLK 28 /* AC97/I2S bit_clk */ -#define GPIO29_SDATA_IN 29 /* AC97 Sdata_in0 / I2S Sdata_in */ -#define GPIO30_SDATA_OUT 30 /* AC97/I2S Sdata_out */ -#define GPIO31_SYNC 31 /* AC97/I2S sync */ -#define GPIO32_SDATA_IN1 32 /* AC97 Sdata_in1 */ -#define GPIO33_nCS_5 33 /* chip select 5 */ -#define GPIO34_FFRXD 34 /* FFUART receive */ -#define GPIO34_MMCCS0 34 /* MMC Chip Select 0 */ -#define GPIO35_FFCTS 35 /* FFUART Clear to send */ -#define GPIO36_FFDCD 36 /* FFUART Data carrier detect */ -#define GPIO37_FFDSR 37 /* FFUART data set ready */ -#define GPIO38_FFRI 38 /* FFUART Ring Indicator */ -#define GPIO39_MMCCS1 39 /* MMC Chip Select 1 */ -#define GPIO39_FFTXD 39 /* FFUART transmit data */ -#define GPIO40_FFDTR 40 /* FFUART data terminal Ready */ -#define GPIO41_FFRTS 41 /* FFUART request to send */ -#define GPIO42_BTRXD 42 /* BTUART receive data */ -#define GPIO43_BTTXD 43 /* BTUART transmit data */ -#define GPIO44_BTCTS 44 /* BTUART clear to send */ -#define GPIO45_BTRTS 45 /* BTUART request to send */ -#define GPIO46_ICPRXD 46 /* ICP receive data */ -#define GPIO46_STRXD 46 /* STD_UART receive data */ -#define GPIO47_ICPTXD 47 /* ICP transmit data */ -#define GPIO47_STTXD 47 /* STD_UART transmit data */ -#define GPIO48_nPOE 48 /* Output Enable for Card Space */ -#define GPIO49_nPWE 49 /* Write Enable for Card Space */ -#define GPIO50_nPIOR 50 /* I/O Read for Card Space */ -#define GPIO51_nPIOW 51 /* I/O Write for Card Space */ -#define GPIO52_nPCE_1 52 /* Card Enable for Card Space */ -#define GPIO53_nPCE_2 53 /* Card Enable for Card Space */ -#define GPIO53_MMCCLK 53 /* MMC Clock */ -#define GPIO54_MMCCLK 54 /* MMC Clock */ -#define GPIO54_pSKTSEL 54 /* Socket Select for Card Space */ -#define GPIO55_nPREG 55 /* Card Address bit 26 */ -#define GPIO56_nPWAIT 56 /* Wait signal for Card Space */ -#define GPIO57_nIOIS16 57 /* Bus Width select for I/O Card Space */ -#define GPIO58_LDD_0 58 /* LCD data pin 0 */ -#define GPIO59_LDD_1 59 /* LCD data pin 1 */ -#define GPIO60_LDD_2 60 /* LCD data pin 2 */ -#define GPIO61_LDD_3 61 /* LCD data pin 3 */ -#define GPIO62_LDD_4 62 /* LCD data pin 4 */ -#define GPIO63_LDD_5 63 /* LCD data pin 5 */ -#define GPIO64_LDD_6 64 /* LCD data pin 6 */ -#define GPIO65_LDD_7 65 /* LCD data pin 7 */ -#define GPIO66_LDD_8 66 /* LCD data pin 8 */ -#define GPIO66_MBREQ 66 /* alternate bus master req */ -#define GPIO67_LDD_9 67 /* LCD data pin 9 */ -#define GPIO67_MMCCS0 67 /* MMC Chip Select 0 */ -#define GPIO68_LDD_10 68 /* LCD data pin 10 */ -#define GPIO68_MMCCS1 68 /* MMC Chip Select 1 */ -#define GPIO69_LDD_11 69 /* LCD data pin 11 */ -#define GPIO69_MMCCLK 69 /* MMC_CLK */ -#define GPIO70_LDD_12 70 /* LCD data pin 12 */ -#define GPIO70_RTCCLK 70 /* Real Time clock (1 Hz) */ -#define GPIO71_LDD_13 71 /* LCD data pin 13 */ -#define GPIO71_3_6MHz 71 /* 3.6 MHz Oscillator clock */ -#define GPIO72_LDD_14 72 /* LCD data pin 14 */ -#define GPIO72_32kHz 72 /* 32 kHz clock */ -#define GPIO73_LDD_15 73 /* LCD data pin 15 */ -#define GPIO73_MBGNT 73 /* Memory controller grant */ -#define GPIO74_LCD_FCLK 74 /* LCD Frame clock */ -#define GPIO75_LCD_LCLK 75 /* LCD line clock */ -#define GPIO76_LCD_PCLK 76 /* LCD Pixel clock */ -#define GPIO77_LCD_ACBIAS 77 /* LCD AC Bias */ -#define GPIO78_nCS_2 78 /* chip select 2 */ -#define GPIO79_nCS_3 79 /* chip select 3 */ -#define GPIO80_nCS_4 80 /* chip select 4 */ - -/* GPIO alternate function mode & direction */ - -#define GPIO_IN 0x000 -#define GPIO_OUT 0x080 -#define GPIO_ALT_FN_1_IN 0x100 -#define GPIO_ALT_FN_1_OUT 0x180 -#define GPIO_ALT_FN_2_IN 0x200 -#define GPIO_ALT_FN_2_OUT 0x280 -#define GPIO_ALT_FN_3_IN 0x300 -#define GPIO_ALT_FN_3_OUT 0x380 -#define GPIO_MD_MASK_NR 0x07f -#define GPIO_MD_MASK_DIR 0x080 -#define GPIO_MD_MASK_FN 0x300 - -#define GPIO1_RTS_MD ( 1 | GPIO_ALT_FN_1_IN) -#define GPIO6_MMCCLK_MD ( 6 | GPIO_ALT_FN_1_OUT) -#define GPIO8_48MHz_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO8_MMCCS0_MD ( 8 | GPIO_ALT_FN_1_OUT) -#define GPIO9_MMCCS1_MD ( 9 | GPIO_ALT_FN_1_OUT) -#define GPIO10_RTCCLK_MD (10 | GPIO_ALT_FN_1_OUT) -#define GPIO11_3_6MHz_MD (11 | GPIO_ALT_FN_1_OUT) -#define GPIO12_32KHz_MD (12 | GPIO_ALT_FN_1_OUT) -#define GPIO13_MBGNT_MD (13 | GPIO_ALT_FN_2_OUT) -#define GPIO14_MBREQ_MD (14 | GPIO_ALT_FN_1_IN) -#define GPIO15_nCS_1_MD (15 | GPIO_ALT_FN_2_OUT) -#define GPIO16_PWM0_MD (16 | GPIO_ALT_FN_2_OUT) -#define GPIO17_PWM1_MD (17 | GPIO_ALT_FN_2_OUT) -#define GPIO18_RDY_MD (18 | GPIO_ALT_FN_1_IN) -#define GPIO19_DREQ1_MD (19 | GPIO_ALT_FN_1_IN) -#define GPIO20_DREQ0_MD (20 | GPIO_ALT_FN_1_IN) -#define GPIO23_SCLK_md (23 | GPIO_ALT_FN_2_OUT) -#define GPIO24_SFRM_MD (24 | GPIO_ALT_FN_2_OUT) -#define GPIO25_STXD_MD (25 | GPIO_ALT_FN_2_OUT) -#define GPIO26_SRXD_MD (26 | GPIO_ALT_FN_1_IN) -#define GPIO27_SEXTCLK_MD (27 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_AC97_MD (28 | GPIO_ALT_FN_1_IN) -#define GPIO28_BITCLK_I2S_MD (28 | GPIO_ALT_FN_2_IN) -#define GPIO29_SDATA_IN_AC97_MD (29 | GPIO_ALT_FN_1_IN) -#define GPIO29_SDATA_IN_I2S_MD (29 | GPIO_ALT_FN_2_IN) -#define GPIO30_SDATA_OUT_AC97_MD (30 | GPIO_ALT_FN_2_OUT) -#define GPIO30_SDATA_OUT_I2S_MD (30 | GPIO_ALT_FN_1_OUT) -#define GPIO31_SYNC_AC97_MD (31 | GPIO_ALT_FN_2_OUT) -#define GPIO31_SYNC_I2S_MD (31 | GPIO_ALT_FN_1_OUT) -#define GPIO32_SDATA_IN1_AC97_MD (32 | GPIO_ALT_FN_1_IN) -#define GPIO33_nCS_5_MD (33 | GPIO_ALT_FN_2_OUT) -#define GPIO34_FFRXD_MD (34 | GPIO_ALT_FN_1_IN) -#define GPIO34_MMCCS0_MD (34 | GPIO_ALT_FN_2_OUT) -#define GPIO35_FFCTS_MD (35 | GPIO_ALT_FN_1_IN) -#define GPIO36_FFDCD_MD (36 | GPIO_ALT_FN_1_IN) -#define GPIO37_FFDSR_MD (37 | GPIO_ALT_FN_1_IN) -#define GPIO38_FFRI_MD (38 | GPIO_ALT_FN_1_IN) -#define GPIO39_MMCCS1_MD (39 | GPIO_ALT_FN_1_OUT) -#define GPIO39_FFTXD_MD (39 | GPIO_ALT_FN_2_OUT) -#define GPIO40_FFDTR_MD (40 | GPIO_ALT_FN_2_OUT) -#define GPIO41_FFRTS_MD (41 | GPIO_ALT_FN_2_OUT) -#define GPIO42_BTRXD_MD (42 | GPIO_ALT_FN_1_IN) -#define GPIO43_BTTXD_MD (43 | GPIO_ALT_FN_2_OUT) -#define GPIO44_BTCTS_MD (44 | GPIO_ALT_FN_1_IN) -#define GPIO45_BTRTS_MD (45 | GPIO_ALT_FN_2_OUT) -#define GPIO46_ICPRXD_MD (46 | GPIO_ALT_FN_1_IN) -#define GPIO46_STRXD_MD (46 | GPIO_ALT_FN_2_IN) -#define GPIO47_ICPTXD_MD (47 | GPIO_ALT_FN_2_OUT) -#define GPIO47_STTXD_MD (47 | GPIO_ALT_FN_1_OUT) -#define GPIO48_nPOE_MD (48 | GPIO_ALT_FN_2_OUT) -#define GPIO49_nPWE_MD (49 | GPIO_ALT_FN_2_OUT) -#define GPIO50_nPIOR_MD (50 | GPIO_ALT_FN_2_OUT) -#define GPIO51_nPIOW_MD (51 | GPIO_ALT_FN_2_OUT) -#define GPIO52_nPCE_1_MD (52 | GPIO_ALT_FN_2_OUT) -#define GPIO53_nPCE_2_MD (53 | GPIO_ALT_FN_2_OUT) -#define GPIO53_MMCCLK_MD (53 | GPIO_ALT_FN_1_OUT) -#define GPIO54_MMCCLK_MD (54 | GPIO_ALT_FN_1_OUT) -#define GPIO54_pSKTSEL_MD (54 | GPIO_ALT_FN_2_OUT) -#define GPIO55_nPREG_MD (55 | GPIO_ALT_FN_2_OUT) -#define GPIO56_nPWAIT_MD (56 | GPIO_ALT_FN_1_IN) -#define GPIO57_nIOIS16_MD (57 | GPIO_ALT_FN_1_IN) -#define GPIO58_LDD_0_MD (58 | GPIO_ALT_FN_2_OUT) -#define GPIO59_LDD_1_MD (59 | GPIO_ALT_FN_2_OUT) -#define GPIO60_LDD_2_MD (60 | GPIO_ALT_FN_2_OUT) -#define GPIO61_LDD_3_MD (61 | GPIO_ALT_FN_2_OUT) -#define GPIO62_LDD_4_MD (62 | GPIO_ALT_FN_2_OUT) -#define GPIO63_LDD_5_MD (63 | GPIO_ALT_FN_2_OUT) -#define GPIO64_LDD_6_MD (64 | GPIO_ALT_FN_2_OUT) -#define GPIO65_LDD_7_MD (65 | GPIO_ALT_FN_2_OUT) -#define GPIO66_LDD_8_MD (66 | GPIO_ALT_FN_2_OUT) -#define GPIO66_MBREQ_MD (66 | GPIO_ALT_FN_1_IN) -#define GPIO67_LDD_9_MD (67 | GPIO_ALT_FN_2_OUT) -#define GPIO67_MMCCS0_MD (67 | GPIO_ALT_FN_1_OUT) -#define GPIO68_LDD_10_MD (68 | GPIO_ALT_FN_2_OUT) -#define GPIO68_MMCCS1_MD (68 | GPIO_ALT_FN_1_OUT) -#define GPIO69_LDD_11_MD (69 | GPIO_ALT_FN_2_OUT) -#define GPIO69_MMCCLK_MD (69 | GPIO_ALT_FN_1_OUT) -#define GPIO70_LDD_12_MD (70 | GPIO_ALT_FN_2_OUT) -#define GPIO70_RTCCLK_MD (70 | GPIO_ALT_FN_1_OUT) -#define GPIO71_LDD_13_MD (71 | GPIO_ALT_FN_2_OUT) -#define GPIO71_3_6MHz_MD (71 | GPIO_ALT_FN_1_OUT) -#define GPIO72_LDD_14_MD (72 | GPIO_ALT_FN_2_OUT) -#define GPIO72_32kHz_MD (72 | GPIO_ALT_FN_1_OUT) -#define GPIO73_LDD_15_MD (73 | GPIO_ALT_FN_2_OUT) -#define GPIO73_MBGNT_MD (73 | GPIO_ALT_FN_1_OUT) -#define GPIO74_LCD_FCLK_MD (74 | GPIO_ALT_FN_2_OUT) -#define GPIO75_LCD_LCLK_MD (75 | GPIO_ALT_FN_2_OUT) -#define GPIO76_LCD_PCLK_MD (76 | GPIO_ALT_FN_2_OUT) -#define GPIO77_LCD_ACBIAS_MD (77 | GPIO_ALT_FN_2_OUT) -#define GPIO78_nCS_2_MD (78 | GPIO_ALT_FN_2_OUT) -#define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) -#define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) - -#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) -#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) - -/* - * Power Manager - */ -#ifdef CONFIG_CPU_MONAHANS - -#define ASCR 0x40F40000 /* Application Subsystem Power Status/Control Register */ -#define ARSR 0x40F40004 /* Application Subsystem Reset Status Register */ -#define AD3ER 0x40F40008 /* Application Subsystem D3 state Wakeup Enable Register */ -#define AD3SR 0x40F4000C /* Application Subsystem D3 state Wakeup Status Register */ -#define AD2D0ER 0x40F40010 /* Application Subsystem D2 to D0 state Wakeup Enable Register */ -#define AD2D0SR 0x40F40014 /* Application Subsystem D2 to D0 state Wakeup Status Register */ -#define AD2D1ER 0x40F40018 /* Application Subsystem D2 to D1 state Wakeup Enable Register */ -#define AD2D1SR 0x40F4001C /* Application Subsystem D2 to D1 state Wakeup Status Register */ -#define AD1D0ER 0x40F40020 /* Application Subsystem D1 to D0 state Wakeup Enable Register */ -#define AD1D0SR 0x40F40024 /* Application Subsystem D1 to D0 state Wakeup Status Register */ -#define ASDCNT 0x40F40028 /* Application Subsystem SRAM Drowsy Count Register */ -#define AD3R 0x40F40030 /* Application Subsystem D3 State Configuration Register */ -#define AD2R 0x40F40034 /* Application Subsystem D2 State Configuration Register */ -#define AD1R 0x40F40038 /* Application Subsystem D1 State Configuration Register */ - -#define PMCR 0x40F50000 /* Power Manager Control Register */ -#define PSR 0x40F50004 /* Power Manager S2 Status Register */ -#define PSPR 0x40F50008 /* Power Manager Scratch Pad Register */ -#define PCFR 0x40F5000C /* Power Manager General Configuration Register */ -#define PWER 0x40F50010 /* Power Manager Wake-up Enable Register */ -#define PWSR 0x40F50014 /* Power Manager Wake-up Status Register */ -#define PECR 0x40F50018 /* Power Manager EXT_WAKEUP[1:0] Control Register */ -#define DCDCSR 0x40F50080 /* DC-DC Controller Status Register */ -#define PVCR 0x40F50100 /* Power Manager Voltage Change Control Register */ -#define PCMD(x) (0x40F50110 + x*4) -#define PCMD0 (0x40F50110 + 0 * 4) -#define PCMD1 (0x40F50110 + 1 * 4) -#define PCMD2 (0x40F50110 + 2 * 4) -#define PCMD3 (0x40F50110 + 3 * 4) -#define PCMD4 (0x40F50110 + 4 * 4) -#define PCMD5 (0x40F50110 + 5 * 4) -#define PCMD6 (0x40F50110 + 6 * 4) -#define PCMD7 (0x40F50110 + 7 * 4) -#define PCMD8 (0x40F50110 + 8 * 4) -#define PCMD9 (0x40F50110 + 9 * 4) -#define PCMD10 (0x40F50110 + 10 * 4) -#define PCMD11 (0x40F50110 + 11 * 4) -#define PCMD12 (0x40F50110 + 12 * 4) -#define PCMD13 (0x40F50110 + 13 * 4) -#define PCMD14 (0x40F50110 + 14 * 4) -#define PCMD15 (0x40F50110 + 15 * 4) -#define PCMD16 (0x40F50110 + 16 * 4) -#define PCMD17 (0x40F50110 + 17 * 4) -#define PCMD18 (0x40F50110 + 18 * 4) -#define PCMD19 (0x40F50110 + 19 * 4) -#define PCMD20 (0x40F50110 + 20 * 4) -#define PCMD21 (0x40F50110 + 21 * 4) -#define PCMD22 (0x40F50110 + 22 * 4) -#define PCMD23 (0x40F50110 + 23 * 4) -#define PCMD24 (0x40F50110 + 24 * 4) -#define PCMD25 (0x40F50110 + 25 * 4) -#define PCMD26 (0x40F50110 + 26 * 4) -#define PCMD27 (0x40F50110 + 27 * 4) -#define PCMD28 (0x40F50110 + 28 * 4) -#define PCMD29 (0x40F50110 + 29 * 4) -#define PCMD30 (0x40F50110 + 30 * 4) -#define PCMD31 (0x40F50110 + 31 * 4) - -#define PCMD_MBC (1<<12) -#define PCMD_DCE (1<<11) -#define PCMD_LC (1<<10) -#define PCMD_SQC (3<<8) /* only 00 and 01 are valid */ - -#define PVCR_FVC (0x1 << 28) -#define PVCR_VCSA (0x1<<14) -#define PVCR_CommandDelay (0xf80) -#define PVCR_ReadPointer 0x01f00000 -#define PVCR_SlaveAddress (0x7f) - -#else /* ifdef CONFIG_CPU_MONAHANS */ - -#define PMCR 0x40F00000 /* Power Manager Control Register */ -#define PSSR 0x40F00004 /* Power Manager Sleep Status Register */ -#define PSPR 0x40F00008 /* Power Manager Scratch Pad Register */ -#define PWER 0x40F0000C /* Power Manager Wake-up Enable Register */ -#define PRER 0x40F00010 /* Power Manager GPIO Rising-Edge Detect Enable Register */ -#define PFER 0x40F00014 /* Power Manager GPIO Falling-Edge Detect Enable Register */ -#define PEDR 0x40F00018 /* Power Manager GPIO Edge Detect Status Register */ -#define PCFR 0x40F0001C /* Power Manager General Configuration Register */ -#define PGSR0 0x40F00020 /* Power Manager GPIO Sleep State Register for GP[31-0] */ -#define PGSR1 0x40F00024 /* Power Manager GPIO Sleep State Register for GP[63-32] */ -#define PGSR2 0x40F00028 /* Power Manager GPIO Sleep State Register for GP[84-64] */ -#define PGSR3 0x40F0002C /* Power Manager GPIO Sleep State Register for GP[118-96] */ -#define RCSR 0x40F00030 /* Reset Controller Status Register */ - -#define PSLR 0x40F00034 /* Power Manager Sleep Config Register */ -#define PSTR 0x40F00038 /* Power Manager Standby Config Register */ -#define PSNR 0x40F0003C /* Power Manager Sense Config Register */ -#define PVCR 0x40F00040 /* Power Manager VoltageControl Register */ -#define PKWR 0x40F00050 /* Power Manager KB Wake-up Enable Reg */ -#define PKSR 0x40F00054 /* Power Manager KB Level-Detect Register */ -#define PCMD(x) (0x40F00080 + x*4) -#define PCMD0 (0x40F00080 + 0 * 4) -#define PCMD1 (0x40F00080 + 1 * 4) -#define PCMD2 (0x40F00080 + 2 * 4) -#define PCMD3 (0x40F00080 + 3 * 4) -#define PCMD4 (0x40F00080 + 4 * 4) -#define PCMD5 (0x40F00080 + 5 * 4) -#define PCMD6 (0x40F00080 + 6 * 4) -#define PCMD7 (0x40F00080 + 7 * 4) -#define PCMD8 (0x40F00080 + 8 * 4) -#define PCMD9 (0x40F00080 + 9 * 4) -#define PCMD10 (0x40F00080 + 10 * 4) -#define PCMD11 (0x40F00080 + 11 * 4) -#define PCMD12 (0x40F00080 + 12 * 4) -#define PCMD13 (0x40F00080 + 13 * 4) -#define PCMD14 (0x40F00080 + 14 * 4) -#define PCMD15 (0x40F00080 + 15 * 4) -#define PCMD16 (0x40F00080 + 16 * 4) -#define PCMD17 (0x40F00080 + 17 * 4) -#define PCMD18 (0x40F00080 + 18 * 4) -#define PCMD19 (0x40F00080 + 19 * 4) -#define PCMD20 (0x40F00080 + 20 * 4) -#define PCMD21 (0x40F00080 + 21 * 4) -#define PCMD22 (0x40F00080 + 22 * 4) -#define PCMD23 (0x40F00080 + 23 * 4) -#define PCMD24 (0x40F00080 + 24 * 4) -#define PCMD25 (0x40F00080 + 25 * 4) -#define PCMD26 (0x40F00080 + 26 * 4) -#define PCMD27 (0x40F00080 + 27 * 4) -#define PCMD28 (0x40F00080 + 28 * 4) -#define PCMD29 (0x40F00080 + 29 * 4) -#define PCMD30 (0x40F00080 + 30 * 4) -#define PCMD31 (0x40F00080 + 31 * 4) - -#define PCMD_MBC (1<<12) -#define PCMD_DCE (1<<11) -#define PCMD_LC (1<<10) -/* FIXME: PCMD_SQC need be checked. */ -#define PCMD_SQC (3<<8) /* currently only bit 8 is changerable, */ - /* bit 9 should be 0 all day. */ -#define PVCR_VCSA (0x1<<14) -#define PVCR_CommandDelay (0xf80) -/* define MACRO for Power Manager General Configuration Register (PCFR) */ -#define PCFR_FVC (0x1 << 10) -#define PCFR_PI2C_EN (0x1 << 6) - -#define PSSR_OTGPH (1 << 6) /* OTG Peripheral control Hold */ -#define PSSR_RDH (1 << 5) /* Read Disable Hold */ -#define PSSR_PH (1 << 4) /* Peripheral Control Hold */ -#define PSSR_VFS (1 << 2) /* VDD Fault Status */ -#define PSSR_BFS (1 << 1) /* Battery Fault Status */ -#define PSSR_SSS (1 << 0) /* Software Sleep Status */ - -#define PCFR_DS (1 << 3) /* Deep Sleep Mode */ -#define PCFR_FS (1 << 2) /* Float Static Chip Selects */ -#define PCFR_FP (1 << 1) /* Float PCMCIA controls */ -#define PCFR_OPDE (1 << 0) /* 3.6864 MHz oscillator power-down enable */ - -#define RCSR_GPR (1 << 3) /* GPIO Reset */ -#define RCSR_SMR (1 << 2) /* Sleep Mode */ -#define RCSR_WDR (1 << 1) /* Watchdog Reset */ -#define RCSR_HWR (1 << 0) /* Hardware Reset */ - -#endif /* CONFIG_CPU_MONAHANS */ - -/* - * SSP Serial Port Registers - */ -#define SSCR0 0x41000000 /* SSP Control Register 0 */ -#define SSCR1 0x41000004 /* SSP Control Register 1 */ -#define SSSR 0x41000008 /* SSP Status Register */ -#define SSITR 0x4100000C /* SSP Interrupt Test Register */ -#define SSDR 0x41000010 /* (Write / Read) SSP Data Write Register/SSP Data Read Register */ - -/* - * MultiMediaCard (MMC) controller - */ -#define MMC_STRPCL 0x41100000 /* Control to start and stop MMC clock */ -#define MMC_STAT 0x41100004 /* MMC Status Register (read only) */ -#define MMC_CLKRT 0x41100008 /* MMC clock rate */ -#define MMC_SPI 0x4110000c /* SPI mode control bits */ -#define MMC_CMDAT 0x41100010 /* Command/response/data sequence control */ -#define MMC_RESTO 0x41100014 /* Expected response time out */ -#define MMC_RDTO 0x41100018 /* Expected data read time out */ -#define MMC_BLKLEN 0x4110001c /* Block length of data transaction */ -#define MMC_NOB 0x41100020 /* Number of blocks, for block mode */ -#define MMC_PRTBUF 0x41100024 /* Partial MMC_TXFIFO FIFO written */ -#define MMC_I_MASK 0x41100028 /* Interrupt Mask */ -#define MMC_I_REG 0x4110002c /* Interrupt Register (read only) */ -#define MMC_CMD 0x41100030 /* Index of current command */ -#define MMC_ARGH 0x41100034 /* MSW part of the current command argument */ -#define MMC_ARGL 0x41100038 /* LSW part of the current command argument */ -#define MMC_RES 0x4110003c /* Response FIFO (read only) */ -#define MMC_RXFIFO 0x41100040 /* Receive FIFO (read only) */ -#define MMC_TXFIFO 0x41100044 /* Transmit FIFO (write only) */ - - -/* - * LCD - */ -#define LCCR0 0x44000000 /* LCD Controller Control Register 0 */ -#define LCCR1 0x44000004 /* LCD Controller Control Register 1 */ -#define LCCR2 0x44000008 /* LCD Controller Control Register 2 */ -#define LCCR3 0x4400000C /* LCD Controller Control Register 3 */ -#define DFBR0 0x44000020 /* DMA Channel 0 Frame Branch Register */ -#define DFBR1 0x44000024 /* DMA Channel 1 Frame Branch Register */ -#define LCSR0 0x44000038 /* LCD Controller Status Register */ -#define LCSR1 0x44000034 /* LCD Controller Status Register */ -#define LIIDR 0x4400003C /* LCD Controller Interrupt ID Register */ -#define TMEDRGBR 0x44000040 /* TMED RGB Seed Register */ -#define TMEDCR 0x44000044 /* TMED Control Register */ - -#define FDADR0 0x44000200 /* DMA Channel 0 Frame Descriptor Address Register */ -#define FSADR0 0x44000204 /* DMA Channel 0 Frame Source Address Register */ -#define FIDR0 0x44000208 /* DMA Channel 0 Frame ID Register */ -#define LDCMD0 0x4400020C /* DMA Channel 0 Command Register */ -#define FDADR1 0x44000210 /* DMA Channel 1 Frame Descriptor Address Register */ -#define FSADR1 0x44000214 /* DMA Channel 1 Frame Source Address Register */ -#define FIDR1 0x44000218 /* DMA Channel 1 Frame ID Register */ -#define LDCMD1 0x4400021C /* DMA Channel 1 Command Register */ - -#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ -#define LCCR0_CMS (1 << 1) /* Color = 0, Monochrome = 1 */ -#define LCCR0_SDS (1 << 2) /* Single Panel = 0, Dual Panel = 1 */ -#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ -#define LCCR0_SFM (1 << 4) /* Start of frame mask */ -#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ -#define LCCR0_EFM (1 << 6) /* End of Frame mask */ -#define LCCR0_PAS (1 << 7) /* Passive = 0, Active = 1 */ -#define LCCR0_BLE (1 << 8) /* Little Endian = 0, Big Endian = 1 */ -#define LCCR0_DPD (1 << 9) /* Double Pixel mode, 4 pixel value = 0, 8 pixle values = 1 */ -#define LCCR0_DIS (1 << 10) /* LCD Disable */ -#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ -#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ -#define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ -#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ -#if defined(CONFIG_CPU_PXA27X) -#define LCCR0_LCDT (1 << 22) /* LCD Panel Type */ -#define LCCR0_RDSTM (1 << 23) /* Read Status Interrupt Mask */ -#define LCCR0_CMDIM (1 << 24) /* Command Interrupt Mask */ -#endif - -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) /* Display Width [1..800 pix.] */ \ - (((Pixel) - 1) << FShft (LCCR1_PPL)) - -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ - /* pulse Width [1..64 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_HSW)) - -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ - /* count - 1 [Tpix] */ -#define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_ELW)) - -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ - /* Wait count - 1 [Tpix] */ -#define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ - /* [1..256 Tpix] */ \ - (((Tpix) - 1) << FShft (LCCR1_BLW)) - - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ - (((Line) - 1) << FShft (LCCR2_LPP)) - -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ - /* Width - 1 [Tln] (L_FCLK) */ -#define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ - /* Width [1..64 Tln] */ \ - (((Tln) - 1) << FShft (LCCR2_VSW)) - -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ - /* count [Tln] */ -#define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_EFW)) - -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ - /* Wait count [Tln] */ -#define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ - /* [0..255 Tln] */ \ - ((Tln) << FShft (LCCR2_BFW)) - -#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ -#define LCCR3_API_S 16 -#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ -#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ -#define LCCR3_PCP (1 << 22) /* pixel clock polarity */ -#define LCCR3_OEP (1 << 23) /* output enable polarity */ -#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ - -#define LCCR3_PDFOR_0 (0 << 30) -#define LCCR3_PDFOR_1 (1 << 30) -#define LCCR3_PDFOR_2 (2 << 30) -#define LCCR3_PDFOR_3 (3 << 30) - - -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor */ \ - (((Div) << FShft (LCCR3_PCD))) - - -#define LCCR3_BPP Fld (3, 24) /* Bit Per Pixel */ -#define LCCR3_Bpp(Bpp) /* Bit Per Pixel */ \ - ((((Bpp&0x7) << FShft (LCCR3_BPP)))|(((Bpp&0x8)<<26))) - -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) /* BAC Bias */ \ - (((Acb) << FShft (LCCR3_ACB))) - -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ - /* pulse active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ - -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ - /* active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ - /* active Low */ - -#define LCSR0_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR0_SOF (1 << 1) /* Start of frame */ -#define LCSR0_BER (1 << 2) /* Bus error */ -#define LCSR0_ABC (1 << 3) /* AC Bias count */ -#define LCSR0_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR0_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR0_OU (1 << 6) /* output FIFO underrun */ -#define LCSR0_QD (1 << 7) /* quick disable */ -#define LCSR0_EOF0 (1 << 8) /* end of frame */ -#define LCSR0_BS (1 << 9) /* branch status */ -#define LCSR0_SINT (1 << 10) /* subsequent interrupt */ - -#define LCSR1_SOF1 (1 << 0) -#define LCSR1_SOF2 (1 << 1) -#define LCSR1_SOF3 (1 << 2) -#define LCSR1_SOF4 (1 << 3) -#define LCSR1_SOF5 (1 << 4) -#define LCSR1_SOF6 (1 << 5) - -#define LCSR1_EOF1 (1 << 8) -#define LCSR1_EOF2 (1 << 9) -#define LCSR1_EOF3 (1 << 10) -#define LCSR1_EOF4 (1 << 11) -#define LCSR1_EOF5 (1 << 12) -#define LCSR1_EOF6 (1 << 13) - -#define LCSR1_BS1 (1 << 16) -#define LCSR1_BS2 (1 << 17) -#define LCSR1_BS3 (1 << 18) -#define LCSR1_BS4 (1 << 19) -#define LCSR1_BS5 (1 << 20) -#define LCSR1_BS6 (1 << 21) - -#define LCSR1_IU2 (1 << 25) -#define LCSR1_IU3 (1 << 26) -#define LCSR1_IU4 (1 << 27) -#define LCSR1_IU5 (1 << 28) -#define LCSR1_IU6 (1 << 29) - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ -#if defined(CONFIG_CPU_PXA27X) -#define LDCMD_SOFINT (1 << 22) -#define LDCMD_EOFINT (1 << 21) -#endif - -/* - * Memory controller - */ - -#ifdef CONFIG_CPU_MONAHANS - -/* PXA3xx */ - -/* Static Memory Controller Registers */ -#define MSC0 0x4A000008 /* Static Memory Control Register 0 */ -#define MSC1 0x4A00000C /* Static Memory Control Register 1 */ -#define MECR 0x4A000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXCNFG 0x4A00001C /* Synchronous Static Memory Control Register */ -#define MCMEM0 0x4A000028 /* Card interface Common Memory Space Socket 0 Timing */ -#define MCATT0 0x4A000030 /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCIO0 0x4A000038 /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MEMCLKCFG 0x4A000068 /* SCLK speed configuration */ -#define CSADRCFG0 0x4A000080 /* Address Configuration for chip select 0 */ -#define CSADRCFG1 0x4A000084 /* Address Configuration for chip select 1 */ -#define CSADRCFG2 0x4A000088 /* Address Configuration for chip select 2 */ -#define CSADRCFG3 0x4A00008C /* Address Configuration for chip select 3 */ -#define CSADRCFG_P 0x4A000090 /* Address Configuration for pcmcia card interface */ -#define CSMSADRCFG 0x4A0000A0 /* Master Address Configuration Register */ -#define CLK_RET_DEL 0x4A0000B0 /* Delay line and mux selects for return data latching for sync. flash */ -#define ADV_RET_DEL 0x4A0000B4 /* Delay line and mux selects for return data latching for sync. flash */ - -/* Dynamic Memory Controller Registers */ -#define MDCNFG 0x48100000 /* SDRAM Configuration Register 0 */ -#define MDREFR 0x48100004 /* SDRAM Refresh Control Register */ -#define FLYCNFG 0x48100020 /* Fly-by DMA DVAL[1:0] polarities */ -#define MDMRS 0x48100040 /* MRS value to be written to SDRAM */ -#define DDR_SCAL 0x48100050 /* Software Delay Line Calibration/Configuration for external DDR memory. */ -#define DDR_HCAL 0x48100060 /* Hardware Delay Line Calibration/Configuration for external DDR memory. */ -#define DDR_WCAL 0x48100068 /* DDR Write Strobe Calibration Register */ -#define DMCIER 0x48100070 /* Dynamic MC Interrupt Enable Register. */ -#define DMCISR 0x48100078 /* Dynamic MC Interrupt Status Register. */ -#define DDR_DLS 0x48100080 /* DDR Delay Line Value Status register for external DDR memory. */ -#define EMPI 0x48100090 /* EMPI Control Register */ -#define RCOMP 0x48100100 -#define PAD_MA 0x48100110 -#define PAD_MDMSB 0x48100114 -#define PAD_MDLSB 0x48100118 -#define PAD_DMEM 0x4810011c -#define PAD_SDCLK 0x48100120 -#define PAD_SDCS 0x48100124 -#define PAD_SMEM 0x48100128 -#define PAD_SCLK 0x4810012C -#define TAI 0x48100F00 /* TAI Tavor Address Isolation Register */ - -/* Some frequently used bits */ -#define MDCNFG_DMAP 0x80000000 /* SDRAM 1GB Memory Map Enable */ -#define MDCNFG_DMCEN 0x40000000 /* Enable Dynamic Memory Controller */ -#define MDCNFG_HWFREQ 0x20000000 /* Hardware Frequency Change Calibration */ -#define MDCNFG_DTYPE 0x400 /* SDRAM Type: 1=DDR SDRAM */ - -#define MDCNFG_DTC_0 0x0 /* Timing Category of SDRAM */ -#define MDCNFG_DTC_1 0x100 -#define MDCNFG_DTC_2 0x200 -#define MDCNFG_DTC_3 0x300 - -#define MDCNFG_DRAC_12 0x0 /* Number of Row Access Bits */ -#define MDCNFG_DRAC_13 0x20 -#define MDCNFG_DRAC_14 0x40 - -#define MDCNFG_DCAC_9 0x0 /* Number of Column Acess Bits */ -#define MDCNFG_DCAC_10 0x08 -#define MDCNFG_DCAC_11 0x10 - -#define MDCNFG_DBW_16 0x4 /* SDRAM Data Bus width 16bit */ -#define MDCNFG_DCSE1 0x2 /* SDRAM CS 1 Enable */ -#define MDCNFG_DCSE0 0x1 /* SDRAM CS 0 Enable */ - - -/* Data Flash Controller Registers */ - -#define NDCR 0x43100000 /* Data Flash Control register */ -#define NDTR0CS0 0x43100004 /* Data Controller Timing Parameter 0 Register for ND_nCS0 */ -/* #define NDTR0CS1 0x43100008 /\* Data Controller Timing Parameter 0 Register for ND_nCS1 *\/ */ -#define NDTR1CS0 0x4310000C /* Data Controller Timing Parameter 1 Register for ND_nCS0 */ -/* #define NDTR1CS1 0x43100010 /\* Data Controller Timing Parameter 1 Register for ND_nCS1 *\/ */ -#define NDSR 0x43100014 /* Data Controller Status Register */ -#define NDPCR 0x43100018 /* Data Controller Page Count Register */ -#define NDBDR0 0x4310001C /* Data Controller Bad Block Register 0 */ -#define NDBDR1 0x43100020 /* Data Controller Bad Block Register 1 */ -#define NDDB 0x43100040 /* Data Controller Data Buffer */ -#define NDCB0 0x43100048 /* Data Controller Command Buffer0 */ -#define NDCB1 0x4310004C /* Data Controller Command Buffer1 */ -#define NDCB2 0x43100050 /* Data Controller Command Buffer2 */ - -#define NDCR_SPARE_EN (0x1<<31) -#define NDCR_ECC_EN (0x1<<30) -#define NDCR_DMA_EN (0x1<<29) -#define NDCR_ND_RUN (0x1<<28) -#define NDCR_DWIDTH_C (0x1<<27) -#define NDCR_DWIDTH_M (0x1<<26) -#define NDCR_PAGE_SZ (0x3<<24) -#define NDCR_NCSX (0x1<<23) -#define NDCR_ND_STOP (0x1<<22) -/* reserved: - * #define NDCR_ND_MODE (0x3<<21) - * #define NDCR_NAND_MODE 0x0 */ -#define NDCR_CLR_PG_CNT (0x1<<20) -#define NDCR_CLR_ECC (0x1<<19) -#define NDCR_RD_ID_CNT (0x7<<16) -#define NDCR_RA_START (0x1<<15) -#define NDCR_PG_PER_BLK (0x1<<14) -#define NDCR_ND_ARB_EN (0x1<<12) -#define NDCR_RDYM (0x1<<11) -#define NDCR_CS0_PAGEDM (0x1<<10) -#define NDCR_CS1_PAGEDM (0x1<<9) -#define NDCR_CS0_CMDDM (0x1<<8) -#define NDCR_CS1_CMDDM (0x1<<7) -#define NDCR_CS0_BBDM (0x1<<6) -#define NDCR_CS1_BBDM (0x1<<5) -#define NDCR_DBERRM (0x1<<4) -#define NDCR_SBERRM (0x1<<3) -#define NDCR_WRDREQM (0x1<<2) -#define NDCR_RDDREQM (0x1<<1) -#define NDCR_WRCMDREQM (0x1) - -#define NDSR_RDY (0x1<<11) -#define NDSR_CS0_PAGED (0x1<<10) -#define NDSR_CS1_PAGED (0x1<<9) -#define NDSR_CS0_CMDD (0x1<<8) -#define NDSR_CS1_CMDD (0x1<<7) -#define NDSR_CS0_BBD (0x1<<6) -#define NDSR_CS1_BBD (0x1<<5) -#define NDSR_DBERR (0x1<<4) -#define NDSR_SBERR (0x1<<3) -#define NDSR_WRDREQ (0x1<<2) -#define NDSR_RDDREQ (0x1<<1) -#define NDSR_WRCMDREQ (0x1) - -#define NDCB0_AUTO_RS (0x1<<25) -#define NDCB0_CSEL (0x1<<24) -#define NDCB0_CMD_TYPE (0x7<<21) -#define NDCB0_NC (0x1<<20) -#define NDCB0_DBC (0x1<<19) -#define NDCB0_ADDR_CYC (0x7<<16) -#define NDCB0_CMD2 (0xff<<8) -#define NDCB0_CMD1 (0xff) -#define MCMEM(s) MCMEM0 -#define MCATT(s) MCATT0 -#define MCIO(s) MCIO0 -#define MECR_CIT (1 << 1)/* Card Is There: 0 -> no card, 1 -> card inserted */ - -/* Maximum values for NAND Interface Timing Registers in DFC clock - * periods */ -#define DFC_MAX_tCH 7 -#define DFC_MAX_tCS 7 -#define DFC_MAX_tWH 7 -#define DFC_MAX_tWP 7 -#define DFC_MAX_tRH 7 -#define DFC_MAX_tRP 15 -#define DFC_MAX_tR 65535 -#define DFC_MAX_tWHR 15 -#define DFC_MAX_tAR 15 - -#define DFC_CLOCK 104 /* DFC Clock is 104 MHz */ -#define DFC_CLK_PER_US DFC_CLOCK/1000 /* clock period in ns */ - -#else /* CONFIG_CPU_MONAHANS */ - -/* PXA2xx */ - -#define MEMC_BASE 0x48000000 /* Base of Memory Controller */ -#define MDCNFG_OFFSET 0x0 -#define MDREFR_OFFSET 0x4 -#define MSC0_OFFSET 0x8 -#define MSC1_OFFSET 0xC -#define MSC2_OFFSET 0x10 -#define MECR_OFFSET 0x14 -#define SXLCR_OFFSET 0x18 -#define SXCNFG_OFFSET 0x1C -#define FLYCNFG_OFFSET 0x20 -#define SXMRS_OFFSET 0x24 -#define MCMEM0_OFFSET 0x28 -#define MCMEM1_OFFSET 0x2C -#define MCATT0_OFFSET 0x30 -#define MCATT1_OFFSET 0x34 -#define MCIO0_OFFSET 0x38 -#define MCIO1_OFFSET 0x3C -#define MDMRS_OFFSET 0x40 - -#define MDCNFG 0x48000000 /* SDRAM Configuration Register 0 */ -#define MDCNFG_DE0 0x00000001 -#define MDCNFG_DE1 0x00000002 -#define MDCNFG_DE2 0x00010000 -#define MDCNFG_DE3 0x00020000 -#define MDCNFG_DWID0 0x00000004 - -#define MDREFR 0x48000004 /* SDRAM Refresh Control Register */ -#define MSC0 0x48000008 /* Static Memory Control Register 0 */ -#define MSC1 0x4800000C /* Static Memory Control Register 1 */ -#define MSC2 0x48000010 /* Static Memory Control Register 2 */ -#define MECR 0x48000014 /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */ -#define SXLCR 0x48000018 /* LCR value to be written to SDRAM-Timing Synchronous Flash */ -#define SXCNFG 0x4800001C /* Synchronous Static Memory Control Register */ -#define FLYCNFG 0x48000020 -#define SXMRS 0x48000024 /* MRS value to be written to Synchronous Flash or SMROM */ -#define MCMEM0 0x48000028 /* Card interface Common Memory Space Socket 0 Timing */ -#define MCMEM1 0x4800002C /* Card interface Common Memory Space Socket 1 Timing */ -#define MCATT0 0x48000030 /* Card interface Attribute Space Socket 0 Timing Configuration */ -#define MCATT1 0x48000034 /* Card interface Attribute Space Socket 1 Timing Configuration */ -#define MCIO0 0x48000038 /* Card interface I/O Space Socket 0 Timing Configuration */ -#define MCIO1 0x4800003C /* Card interface I/O Space Socket 1 Timing Configuration */ -#define MDMRS 0x48000040 /* MRS value to be written to SDRAM */ -#define BOOT_DEF 0x48000044 /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */ - -#define MDREFR_ALTREFA (1 << 31) /* Exiting Alternate Bus Master Mode Refresh Control */ -#define MDREFR_ALTREFB (1 << 30) /* Entering Alternate Bus Master Mode Refresh Control */ -#define MDREFR_K0DB4 (1 << 29) /* SDCLK0 Divide by 4 Control/Status */ -#define MDREFR_K2FREE (1 << 25) /* SDRAM Free-Running Control */ -#define MDREFR_K1FREE (1 << 24) /* SDRAM Free-Running Control */ -#define MDREFR_K0FREE (1 << 23) /* SDRAM Free-Running Control */ -#define MDREFR_SLFRSH (1 << 22) /* SDRAM Self-Refresh Control/Status */ -#define MDREFR_APD (1 << 20) /* SDRAM/SSRAM Auto-Power-Down Enable */ -#define MDREFR_K2DB2 (1 << 19) /* SDCLK2 Divide by 2 Control/Status */ -#define MDREFR_K2RUN (1 << 18) /* SDCLK2 Run Control/Status */ -#define MDREFR_K1DB2 (1 << 17) /* SDCLK1 Divide by 2 Control/Status */ -#define MDREFR_K1RUN (1 << 16) /* SDCLK1 Run Control/Status */ -#define MDREFR_E1PIN (1 << 15) /* SDCKE1 Level Control/Status */ -#define MDREFR_K0DB2 (1 << 14) /* SDCLK0 Divide by 2 Control/Status */ -#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */ -#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */ - -#if defined(CONFIG_CPU_PXA27X) - -#define ARB_CNTRL 0x48000048 /* Arbiter Control Register */ - -#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */ -#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */ -#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */ -#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */ -#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */ -#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */ -#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */ -#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ -#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ - -#endif /* CONFIG_CPU_PXA27X */ - -/* LCD registers */ -#define LCCR4 0x44000010 /* LCD Controller Control Register 4 */ -#define LCCR5 0x44000014 /* LCD Controller Control Register 5 */ -#define FBR0 0x44000020 /* DMA Channel 0 Frame Branch Register */ -#define FBR1 0x44000024 /* DMA Channel 1 Frame Branch Register */ -#define FBR2 0x44000028 /* DMA Channel 2 Frame Branch Register */ -#define FBR3 0x4400002C /* DMA Channel 3 Frame Branch Register */ -#define FBR4 0x44000030 /* DMA Channel 4 Frame Branch Register */ -#define FDADR2 0x44000220 /* DMA Channel 2 Frame Descriptor Address Register */ -#define FSADR2 0x44000224 /* DMA Channel 2 Frame Source Address Register */ -#define FIDR2 0x44000228 /* DMA Channel 2 Frame ID Register */ -#define LDCMD2 0x4400022C /* DMA Channel 2 Command Register */ -#define FDADR3 0x44000230 /* DMA Channel 3 Frame Descriptor Address Register */ -#define FSADR3 0x44000234 /* DMA Channel 3 Frame Source Address Register */ -#define FIDR3 0x44000238 /* DMA Channel 3 Frame ID Register */ -#define LDCMD3 0x4400023C /* DMA Channel 3 Command Register */ -#define FDADR4 0x44000240 /* DMA Channel 4 Frame Descriptor Address Register */ -#define FSADR4 0x44000244 /* DMA Channel 4 Frame Source Address Register */ -#define FIDR4 0x44000248 /* DMA Channel 4 Frame ID Register */ -#define LDCMD4 0x4400024C /* DMA Channel 4 Command Register */ -#define FDADR5 0x44000250 /* DMA Channel 5 Frame Descriptor Address Register */ -#define FSADR5 0x44000254 /* DMA Channel 5 Frame Source Address Register */ -#define FIDR5 0x44000258 /* DMA Channel 5 Frame ID Register */ -#define LDCMD5 0x4400025C /* DMA Channel 5 Command Register */ - -#define OVL1C1 0x44000050 /* Overlay 1 Control Register 1 */ -#define OVL1C2 0x44000060 /* Overlay 1 Control Register 2 */ -#define OVL2C1 0x44000070 /* Overlay 2 Control Register 1 */ -#define OVL2C2 0x44000080 /* Overlay 2 Control Register 2 */ -#define CCR 0x44000090 /* Cursor Control Register */ - -#define FBR5 0x44000110 /* DMA Channel 5 Frame Branch Register */ -#define FBR6 0x44000114 /* DMA Channel 6 Frame Branch Register */ - -#define LCCR0_LDDALT (1<<26) /* LDD Alternate mapping bit when base pixel is RGBT16 */ -#define LCCR0_OUC (1<<25) /* Overlay Underlay Control Bit */ - -#define LCCR5_SOFM1 (1<<0) /* Start Of Frame Mask for Overlay 1 (channel 1) */ -#define LCCR5_SOFM2 (1<<1) /* Start Of Frame Mask for Overlay 2 (channel 2) */ -#define LCCR5_SOFM3 (1<<2) /* Start Of Frame Mask for Overlay 2 (channel 3) */ -#define LCCR5_SOFM4 (1<<3) /* Start Of Frame Mask for Overlay 2 (channel 4) */ -#define LCCR5_SOFM5 (1<<4) /* Start Of Frame Mask for cursor (channel 5) */ -#define LCCR5_SOFM6 (1<<5) /* Start Of Frame Mask for command data (channel 6) */ - -#define LCCR5_EOFM1 (1<<8) /* End Of Frame Mask for Overlay 1 (channel 1) */ -#define LCCR5_EOFM2 (1<<9) /* End Of Frame Mask for Overlay 2 (channel 2) */ -#define LCCR5_EOFM3 (1<<10) /* End Of Frame Mask for Overlay 2 (channel 3) */ -#define LCCR5_EOFM4 (1<<11) /* End Of Frame Mask for Overlay 2 (channel 4) */ -#define LCCR5_EOFM5 (1<<12) /* End Of Frame Mask for cursor (channel 5) */ -#define LCCR5_EOFM6 (1<<13) /* End Of Frame Mask for command data (channel 6) */ - -#define LCCR5_BSM1 (1<<16) /* Branch mask for Overlay 1 (channel 1) */ -#define LCCR5_BSM2 (1<<17) /* Branch mask for Overlay 2 (channel 2) */ -#define LCCR5_BSM3 (1<<18) /* Branch mask for Overlay 2 (channel 3) */ -#define LCCR5_BSM4 (1<<19) /* Branch mask for Overlay 2 (channel 4) */ -#define LCCR5_BSM5 (1<<20) /* Branch mask for cursor (channel 5) */ -#define LCCR5_BSM6 (1<<21) /* Branch mask for data command (channel 6) */ - -#define LCCR5_IUM1 (1<<24) /* Input FIFO Underrun Mask for Overlay 1 */ -#define LCCR5_IUM2 (1<<25) /* Input FIFO Underrun Mask for Overlay 2 */ -#define LCCR5_IUM3 (1<<26) /* Input FIFO Underrun Mask for Overlay 2 */ -#define LCCR5_IUM4 (1<<27) /* Input FIFO Underrun Mask for Overlay 2 */ -#define LCCR5_IUM5 (1<<28) /* Input FIFO Underrun Mask for cursor */ -#define LCCR5_IUM6 (1<<29) /* Input FIFO Underrun Mask for data command */ - -#define OVL1C1_O1EN (1<<31) /* Enable bit for Overlay 1 */ -#define OVL2C1_O2EN (1<<31) /* Enable bit for Overlay 2 */ -#define CCR_CEN (1<<31) /* Enable bit for Cursor */ - -/* Keypad controller */ - -#define KPC 0x41500000 /* Keypad Interface Control register */ -#define KPDK 0x41500008 /* Keypad Interface Direct Key register */ -#define KPREC 0x41500010 /* Keypad Intefcace Rotary Encoder register */ -#define KPMK 0x41500018 /* Keypad Intefcace Matrix Key register */ -#define KPAS 0x41500020 /* Keypad Interface Automatic Scan register */ -#define KPASMKP0 0x41500028 /* Keypad Interface Automatic Scan Multiple Key Presser register 0 */ -#define KPASMKP1 0x41500030 /* Keypad Interface Automatic Scan Multiple Key Presser register 1 */ -#define KPASMKP2 0x41500038 /* Keypad Interface Automatic Scan Multiple Key Presser register 2 */ -#define KPASMKP3 0x41500040 /* Keypad Interface Automatic Scan Multiple Key Presser register 3 */ -#define KPKDI 0x41500048 /* Keypad Interface Key Debounce Interval register */ - -#define KPC_AS (0x1 << 30) /* Automatic Scan bit */ -#define KPC_ASACT (0x1 << 29) /* Automatic Scan on Activity */ -#define KPC_MI (0x1 << 22) /* Matrix interrupt bit */ -#define KPC_IMKP (0x1 << 21) /* Ignore Multiple Key Press */ -#define KPC_MS7 (0x1 << 20) /* Matrix scan line 7 */ -#define KPC_MS6 (0x1 << 19) /* Matrix scan line 6 */ -#define KPC_MS5 (0x1 << 18) /* Matrix scan line 5 */ -#define KPC_MS4 (0x1 << 17) /* Matrix scan line 4 */ -#define KPC_MS3 (0x1 << 16) /* Matrix scan line 3 */ -#define KPC_MS2 (0x1 << 15) /* Matrix scan line 2 */ -#define KPC_MS1 (0x1 << 14) /* Matrix scan line 1 */ -#define KPC_MS0 (0x1 << 13) /* Matrix scan line 0 */ -#define KPC_ME (0x1 << 12) /* Matrix Keypad Enable */ -#define KPC_MIE (0x1 << 11) /* Matrix Interrupt Enable */ -#define KPC_DK_DEB_SEL (0x1 << 9) /* Direct Key Debounce select */ -#define KPC_DI (0x1 << 5) /* Direct key interrupt bit */ -#define KPC_DEE0 (0x1 << 2) /* Rotary Encoder 0 Enable */ -#define KPC_DE (0x1 << 1) /* Direct Keypad Enable */ -#define KPC_DIE (0x1 << 0) /* Direct Keypad interrupt Enable */ - -#define KPDK_DKP (0x1 << 31) -#define KPDK_DK7 (0x1 << 7) -#define KPDK_DK6 (0x1 << 6) -#define KPDK_DK5 (0x1 << 5) -#define KPDK_DK4 (0x1 << 4) -#define KPDK_DK3 (0x1 << 3) -#define KPDK_DK2 (0x1 << 2) -#define KPDK_DK1 (0x1 << 1) -#define KPDK_DK0 (0x1 << 0) - -#define KPREC_OF1 (0x1 << 31) -#define kPREC_UF1 (0x1 << 30) -#define KPREC_OF0 (0x1 << 15) -#define KPREC_UF0 (0x1 << 14) - -#define KPMK_MKP (0x1 << 31) -#define KPAS_SO (0x1 << 31) -#define KPASMKPx_SO (0x1 << 31) - -#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ -#define PSLR 0x40F00034 -#define PSTR 0x40F00038 /* Power Manager Standby Configuration Reg */ -#define PSNR 0x40F0003C /* Power Manager Sense Configuration Reg */ -#define PVCR 0x40F00040 /* Power Manager Voltage Change Control Reg */ -#define PKWR 0x40F00050 /* Power Manager KB Wake-Up Enable Reg */ -#define PKSR 0x40F00054 /* Power Manager KB Level-Detect Status Reg */ -#define OSMR4 0x40A00080 /* */ -#define OSCR4 0x40A00040 /* OS Timer Counter Register */ -#define OMCR4 0x40A000C0 /* */ - -#endif /* CONFIG_CPU_PXA27X */ - -#endif /* _PXA_REGS_H_ */ diff --git a/arch/arm/include/asm/arch-pxa/pxa.h b/arch/arm/include/asm/arch-pxa/pxa.h deleted file mode 100644 index 428a848e15..0000000000 --- a/arch/arm/include/asm/arch-pxa/pxa.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * PXA common functions - * - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - */ - -#ifndef __PXA_H__ -#define __PXA_H__ - -#define PXA255_A0 0x00000106 -#define PXA250_C0 0x00000105 -#define PXA250_B2 0x00000104 -#define PXA250_B1 0x00000103 -#define PXA250_B0 0x00000102 -#define PXA250_A1 0x00000101 -#define PXA250_A0 0x00000100 -#define PXA210_C0 0x00000125 -#define PXA210_B2 0x00000124 -#define PXA210_B1 0x00000123 -#define PXA210_B0 0x00000122 - -int cpu_is_pxa25x(void); -int cpu_is_pxa27x(void); -uint32_t pxa_get_cpu_revision(void); -void pxa2xx_dram_init(void); - -#endif /* __PXA_H__ */ diff --git a/arch/arm/include/asm/arch-pxa/regs-mmc.h b/arch/arm/include/asm/arch-pxa/regs-mmc.h deleted file mode 100644 index 6d9a736d9c..0000000000 --- a/arch/arm/include/asm/arch-pxa/regs-mmc.h +++ /dev/null @@ -1,140 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - */ - -#ifndef __REGS_MMC_H__ -#define __REGS_MMC_H__ - -#define MMC0_BASE 0x41100000 -#define MMC1_BASE 0x42000000 - -int pxa_mmc_register(int card_index); - -struct pxa_mmc_regs { - uint32_t strpcl; - uint32_t stat; - uint32_t clkrt; - uint32_t spi; - uint32_t cmdat; - uint32_t resto; - uint32_t rdto; - uint32_t blklen; - uint32_t nob; - uint32_t prtbuf; - uint32_t i_mask; - uint32_t i_reg; - uint32_t cmd; - uint32_t argh; - uint32_t argl; - uint32_t res; - uint32_t rxfifo; - uint32_t txfifo; -}; - -/* MMC_STRPCL */ -#define MMC_STRPCL_STOP_CLK (1 << 0) -#define MMC_STRPCL_START_CLK (1 << 1) - -/* MMC_STAT */ -#define MMC_STAT_END_CMD_RES (1 << 13) -#define MMC_STAT_PRG_DONE (1 << 12) -#define MMC_STAT_DATA_TRAN_DONE (1 << 11) -#define MMC_STAT_CLK_EN (1 << 8) -#define MMC_STAT_RECV_FIFO_FULL (1 << 7) -#define MMC_STAT_XMIT_FIFO_EMPTY (1 << 6) -#define MMC_STAT_RES_CRC_ERROR (1 << 5) -#define MMC_STAT_SPI_READ_ERROR_TOKEN (1 << 4) -#define MMC_STAT_CRC_READ_ERROR (1 << 3) -#define MMC_STAT_CRC_WRITE_ERROR (1 << 2) -#define MMC_STAT_TIME_OUT_RESPONSE (1 << 1) -#define MMC_STAT_READ_TIME_OUT (1 << 0) - -/* MMC_CLKRT */ -#define MMC_CLKRT_20MHZ 0 -#define MMC_CLKRT_10MHZ 1 -#define MMC_CLKRT_5MHZ 2 -#define MMC_CLKRT_2_5MHZ 3 -#define MMC_CLKRT_1_25MHZ 4 -#define MMC_CLKRT_0_625MHZ 5 -#define MMC_CLKRT_0_3125MHZ 6 - -/* MMC_SPI */ -#define MMC_SPI_EN (1 << 0) -#define MMC_SPI_CS_EN (1 << 2) -#define MMC_SPI_CS_ADDRESS (1 << 3) -#define MMC_SPI_CRC_ON (1 << 1) - -/* MMC_CMDAT */ -#define MMC_CMDAT_SD_4DAT (1 << 8) -#define MMC_CMDAT_MMC_DMA_EN (1 << 7) -#define MMC_CMDAT_INIT (1 << 6) -#define MMC_CMDAT_BUSY (1 << 5) -#define MMC_CMDAT_BCR (MMC_CMDAT_BUSY | MMC_CMDAT_INIT) -#define MMC_CMDAT_STREAM (1 << 4) -#define MMC_CMDAT_WRITE (1 << 3) -#define MMC_CMDAT_DATA_EN (1 << 2) -#define MMC_CMDAT_R0 0 -#define MMC_CMDAT_R1 1 -#define MMC_CMDAT_R2 2 -#define MMC_CMDAT_R3 3 - -/* MMC_RESTO */ -#define MMC_RES_TO_MAX_MASK 0x7f - -/* MMC_RDTO */ -#define MMC_READ_TO_MAX_MASK 0xffff - -/* MMC_BLKLEN */ -#define MMC_BLK_LEN_MAX_MASK 0x3ff - -/* MMC_PRTBUF */ -#define MMC_PRTBUF_BUF_PART_FULL (1 << 0) - -/* MMC_I_MASK */ -#define MMC_I_MASK_TXFIFO_WR_REQ (1 << 6) -#define MMC_I_MASK_RXFIFO_RD_REQ (1 << 5) -#define MMC_I_MASK_CLK_IS_OFF (1 << 4) -#define MMC_I_MASK_STOP_CMD (1 << 3) -#define MMC_I_MASK_END_CMD_RES (1 << 2) -#define MMC_I_MASK_PRG_DONE (1 << 1) -#define MMC_I_MASK_DATA_TRAN_DONE (1 << 0) -#define MMC_I_MASK_ALL 0x7f - - -/* MMC_I_REG */ -#define MMC_I_REG_TXFIFO_WR_REQ (1 << 6) -#define MMC_I_REG_RXFIFO_RD_REQ (1 << 5) -#define MMC_I_REG_CLK_IS_OFF (1 << 4) -#define MMC_I_REG_STOP_CMD (1 << 3) -#define MMC_I_REG_END_CMD_RES (1 << 2) -#define MMC_I_REG_PRG_DONE (1 << 1) -#define MMC_I_REG_DATA_TRAN_DONE (1 << 0) - -/* MMC_CMD */ -#define MMC_CMD_INDEX_MAX 0x6f - -#define MMC_R1_IDLE_STATE 0x01 -#define MMC_R1_ERASE_STATE 0x02 -#define MMC_R1_ILLEGAL_CMD 0x04 -#define MMC_R1_COM_CRC_ERR 0x08 -#define MMC_R1_ERASE_SEQ_ERR 0x01 -#define MMC_R1_ADDR_ERR 0x02 -#define MMC_R1_PARAM_ERR 0x04 - -#define MMC_R1B_WP_ERASE_SKIP 0x0002 -#define MMC_R1B_ERR 0x0004 -#define MMC_R1B_CC_ERR 0x0008 -#define MMC_R1B_CARD_ECC_ERR 0x0010 -#define MMC_R1B_WP_VIOLATION 0x0020 -#define MMC_R1B_ERASE_PARAM 0x0040 -#define MMC_R1B_OOR 0x0080 -#define MMC_R1B_IDLE_STATE 0x0100 -#define MMC_R1B_ERASE_RESET 0x0200 -#define MMC_R1B_ILLEGAL_CMD 0x0400 -#define MMC_R1B_COM_CRC_ERR 0x0800 -#define MMC_R1B_ERASE_SEQ_ERR 0x1000 -#define MMC_R1B_ADDR_ERR 0x2000 -#define MMC_R1B_PARAM_ERR 0x4000 - -#endif /* __REGS_MMC_H__ */ diff --git a/arch/arm/include/asm/arch-pxa/regs-uart.h b/arch/arm/include/asm/arch-pxa/regs-uart.h deleted file mode 100644 index bdd0a4757b..0000000000 --- a/arch/arm/include/asm/arch-pxa/regs-uart.h +++ /dev/null @@ -1,95 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> - */ - -#ifndef __REGS_UART_H__ -#define __REGS_UART_H__ - -#define FFUART_BASE 0x40100000 -#define BTUART_BASE 0x40200000 -#define STUART_BASE 0x40700000 -#define HWUART_BASE 0x41600000 - -struct pxa_uart_regs { - union { - uint32_t thr; - uint32_t rbr; - uint32_t dll; - }; - union { - uint32_t ier; - uint32_t dlh; - }; - union { - uint32_t fcr; - uint32_t iir; - }; - uint32_t lcr; - uint32_t mcr; - uint32_t lsr; - uint32_t msr; - uint32_t spr; - uint32_t isr; -}; - -#define IER_DMAE (1 << 7) -#define IER_UUE (1 << 6) -#define IER_NRZE (1 << 5) -#define IER_RTIOE (1 << 4) -#define IER_MIE (1 << 3) -#define IER_RLSE (1 << 2) -#define IER_TIE (1 << 1) -#define IER_RAVIE (1 << 0) - -#define IIR_FIFOES1 (1 << 7) -#define IIR_FIFOES0 (1 << 6) -#define IIR_TOD (1 << 3) -#define IIR_IID2 (1 << 2) -#define IIR_IID1 (1 << 1) -#define IIR_IP (1 << 0) - -#define FCR_ITL2 (1 << 7) -#define FCR_ITL1 (1 << 6) -#define FCR_RESETTF (1 << 2) -#define FCR_RESETRF (1 << 1) -#define FCR_TRFIFOE (1 << 0) -#define FCR_ITL_1 0 -#define FCR_ITL_8 (FCR_ITL1) -#define FCR_ITL_16 (FCR_ITL2) -#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1) - -#define LCR_DLAB (1 << 7) -#define LCR_SB (1 << 6) -#define LCR_STKYP (1 << 5) -#define LCR_EPS (1 << 4) -#define LCR_PEN (1 << 3) -#define LCR_STB (1 << 2) -#define LCR_WLS1 (1 << 1) -#define LCR_WLS0 (1 << 0) - -#define LSR_FIFOE (1 << 7) -#define LSR_TEMT (1 << 6) -#define LSR_TDRQ (1 << 5) -#define LSR_BI (1 << 4) -#define LSR_FE (1 << 3) -#define LSR_PE (1 << 2) -#define LSR_OE (1 << 1) -#define LSR_DR (1 << 0) - -#define MCR_LOOP (1 << 4) -#define MCR_OUT2 (1 << 3) -#define MCR_OUT1 (1 << 2) -#define MCR_RTS (1 << 1) -#define MCR_DTR (1 << 0) - -#define MSR_DCD (1 << 7) -#define MSR_RI (1 << 6) -#define MSR_DSR (1 << 5) -#define MSR_CTS (1 << 4) -#define MSR_DDCD (1 << 3) -#define MSR_TERI (1 << 2) -#define MSR_DDSR (1 << 1) -#define MSR_DCTS (1 << 0) - -#endif /* __REGS_UART_H__ */ diff --git a/arch/arm/include/asm/arch-pxa/regs-usb.h b/arch/arm/include/asm/arch-pxa/regs-usb.h deleted file mode 100644 index e46887c9ed..0000000000 --- a/arch/arm/include/asm/arch-pxa/regs-usb.h +++ /dev/null @@ -1,146 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * PXA25x UDC definitions - * - * Copyright (C) 2012 Łukasz Dałek <luk0104@gmail.com> - */ - -#ifndef __REGS_USB_H__ -#define __REGS_USB_H__ - -struct pxa25x_udc_regs { - /* UDC Control Register */ - uint32_t udccr; /* 0x000 */ - uint32_t reserved1; - - /* UDC Control Function Register */ - uint32_t udccfr; /* 0x008 */ - uint32_t reserved2; - - /* UDC Endpoint Control/Status Registers */ - uint32_t udccs[16]; /* 0x010 - 0x04c */ - - /* UDC Interrupt Control/Status Registers */ - uint32_t uicr0; /* 0x050 */ - uint32_t uicr1; /* 0x054 */ - uint32_t usir0; /* 0x058 */ - uint32_t usir1; /* 0x05c */ - - /* UDC Frame Number/Byte Count Registers */ - uint32_t ufnrh; /* 0x060 */ - uint32_t ufnrl; /* 0x064 */ - uint32_t ubcr2; /* 0x068 */ - uint32_t ubcr4; /* 0x06c */ - uint32_t ubcr7; /* 0x070 */ - uint32_t ubcr9; /* 0x074 */ - uint32_t ubcr12; /* 0x078 */ - uint32_t ubcr14; /* 0x07c */ - - /* UDC Endpoint Data Registers */ - uint32_t uddr0; /* 0x080 */ - uint32_t reserved3[7]; - uint32_t uddr5; /* 0x0a0 */ - uint32_t reserved4[7]; - uint32_t uddr10; /* 0x0c0 */ - uint32_t reserved5[7]; - uint32_t uddr15; /* 0x0e0 */ - uint32_t reserved6[7]; - uint32_t uddr1; /* 0x100 */ - uint32_t reserved7[31]; - uint32_t uddr2; /* 0x180 */ - uint32_t reserved8[31]; - uint32_t uddr3; /* 0x200 */ - uint32_t reserved9[127]; - uint32_t uddr4; /* 0x400 */ - uint32_t reserved10[127]; - uint32_t uddr6; /* 0x600 */ - uint32_t reserved11[31]; - uint32_t uddr7; /* 0x680 */ - uint32_t reserved12[31]; - uint32_t uddr8; /* 0x700 */ - uint32_t reserved13[127]; - uint32_t uddr9; /* 0x900 */ - uint32_t reserved14[127]; - uint32_t uddr11; /* 0xb00 */ - uint32_t reserved15[31]; - uint32_t uddr12; /* 0xb80 */ - uint32_t reserved16[31]; - uint32_t uddr13; /* 0xc00 */ - uint32_t reserved17[127]; - uint32_t uddr14; /* 0xe00 */ - -}; - -#define PXA25X_UDC_BASE 0x40600000 - -#define UDCCR_UDE (1 << 0) -#define UDCCR_UDA (1 << 1) -#define UDCCR_RSM (1 << 2) -#define UDCCR_RESIR (1 << 3) -#define UDCCR_SUSIR (1 << 4) -#define UDCCR_SRM (1 << 5) -#define UDCCR_RSTIR (1 << 6) -#define UDCCR_REM (1 << 7) - -/* Bulk IN endpoint 1/6/11 */ -#define UDCCS_BI_TSP (1 << 7) -#define UDCCS_BI_FST (1 << 5) -#define UDCCS_BI_SST (1 << 4) -#define UDCCS_BI_TUR (1 << 3) -#define UDCCS_BI_FTF (1 << 2) -#define UDCCS_BI_TPC (1 << 1) -#define UDCCS_BI_TFS (1 << 0) - -/* Bulk OUT endpoint 2/7/12 */ -#define UDCCS_BO_RSP (1 << 7) -#define UDCCS_BO_RNE (1 << 6) -#define UDCCS_BO_FST (1 << 5) -#define UDCCS_BO_SST (1 << 4) -#define UDCCS_BO_DME (1 << 3) -#define UDCCS_BO_RPC (1 << 1) -#define UDCCS_BO_RFS (1 << 0) - -/* Isochronous OUT endpoint 4/9/14 */ -#define UDCCS_IO_RSP (1 << 7) -#define UDCCS_IO_RNE (1 << 6) -#define UDCCS_IO_DME (1 << 3) -#define UDCCS_IO_ROF (1 << 2) -#define UDCCS_IO_RPC (1 << 1) -#define UDCCS_IO_RFS (1 << 0) - -/* Control endpoint 0 */ -#define UDCCS0_OPR (1 << 0) -#define UDCCS0_IPR (1 << 1) -#define UDCCS0_FTF (1 << 2) -#define UDCCS0_DRWF (1 << 3) -#define UDCCS0_SST (1 << 4) -#define UDCCS0_FST (1 << 5) -#define UDCCS0_RNE (1 << 6) -#define UDCCS0_SA (1 << 7) - -#define UICR0_IM0 (1 << 0) - -#define USIR0_IR0 (1 << 0) -#define USIR0_IR1 (1 << 1) -#define USIR0_IR2 (1 << 2) -#define USIR0_IR3 (1 << 3) -#define USIR0_IR4 (1 << 4) -#define USIR0_IR5 (1 << 5) -#define USIR0_IR6 (1 << 6) -#define USIR0_IR7 (1 << 7) - -#define UDCCFR_AREN (1 << 7) /* ACK response enable (now) */ -#define UDCCFR_ACM (1 << 2) /* ACK control mode (wait for AREN) */ -/* - * Intel(R) PXA255 Processor Specification, September 2003 (page 31) - * define new "must be one" bits in UDCCFR (see Table 12-13.) - */ -#define UDCCFR_MB1 (0xff & ~(UDCCFR_AREN | UDCCFR_ACM)) - -#define UFNRH_SIR (1 << 7) /* SOF interrupt request */ -#define UFNRH_SIM (1 << 6) /* SOF interrupt mask */ -#define UFNRH_IPE14 (1 << 5) /* ISO packet error, ep14 */ -#define UFNRH_IPE9 (1 << 4) /* ISO packet error, ep9 */ -#define UFNRH_IPE4 (1 << 3) /* ISO packet error, ep4 */ - -#endif /* __REGS_USB_H__ */ diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h index 26f1877791..5870412c43 100644 --- a/arch/arm/include/asm/config.h +++ b/arch/arm/include/asm/config.h @@ -6,11 +6,7 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #if defined(CONFIG_ARCH_LS1021A) || \ - defined(CONFIG_CPU_PXA27X) || \ - defined(CONFIG_CPU_MONAHANS) || \ defined(CONFIG_FSL_LAYERSCAPE) #include <asm/arch/config.h> #endif diff --git a/arch/arm/include/asm/fsl_secure_boot.h b/arch/arm/include/asm/fsl_secure_boot.h index b0c7599e41..a4f4961fc8 100644 --- a/arch/arm/include/asm/fsl_secure_boot.h +++ b/arch/arm/include/asm/fsl_secure_boot.h @@ -8,31 +8,6 @@ #define __FSL_SECURE_BOOT_H #ifdef CONFIG_CHAIN_OF_TRUST -#define CONFIG_FSL_SEC_MON - -#ifdef CONFIG_SPL_BUILD -/* - * Define the key hash for U-Boot here if public/private key pair used to - * sign U-boot are different from the SRK hash put in the fuse - * Example of defining KEY_HASH is - * #define CONFIG_SPL_UBOOT_KEY_HASH \ - * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" - * else leave it defined as NULL - */ - -#define CONFIG_SPL_UBOOT_KEY_HASH NULL -#endif /* ifdef CONFIG_SPL_BUILD */ - -#define CONFIG_KEY_REVOCATION - -#if defined(CONFIG_FSL_LAYERSCAPE) -/* - * For fsl layerscape based platforms, ESBC image Address in Header - * is 64 bit. - */ -#define CONFIG_ESBC_ADDR_64BIT -#endif - #ifndef CONFIG_SPL_BUILD #ifndef CONFIG_SYS_RAMBOOT /* The key used for verification of next level images @@ -49,76 +24,6 @@ #endif -#ifdef CONFIG_ARCH_LS2080A -#define CONFIG_EXTRA_ENV \ - "setenv fdt_high 0xa0000000;" \ - "setenv initrd_high 0xcfffffff;" \ - "setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';" -#else -#define CONFIG_EXTRA_ENV \ - "setenv fdt_high 0xffffffff;" \ - "setenv initrd_high 0xffffffff;" \ - "setenv hwconfig \'fsl_ddr:ctlr_intlv=null,bank_intlv=null\';" -#endif - -/* Copying Bootscript and Header to DDR from NOR for LS2 and for rest, from - * Non-XIP Memory (Nand/SD)*/ -#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_FSL_LSCH3) || \ - defined(CONFIG_SD_BOOT) || defined(CONFIG_NAND_BOOT) -#define CONFIG_BOOTSCRIPT_COPY_RAM -#endif -/* The address needs to be modified according to NOR, NAND, SD and - * DDR memory map - */ -#ifdef CONFIG_FSL_LSCH3 -#ifdef CONFIG_QSPI_BOOT -#define CONFIG_BS_ADDR_DEVICE 0x20600000 -#define CONFIG_BS_HDR_ADDR_DEVICE 0x20640000 -#else /* NOR BOOT */ -#define CONFIG_BS_ADDR_DEVICE 0x580600000 -#define CONFIG_BS_HDR_ADDR_DEVICE 0x580640000 -#endif /*ifdef CONFIG_QSPI_BOOT */ -#define CONFIG_BS_SIZE 0x00001000 -#define CONFIG_BS_HDR_SIZE 0x00004000 -#define CONFIG_BS_ADDR_RAM 0xa0600000 -#define CONFIG_BS_HDR_ADDR_RAM 0xa0640000 -#else -#ifdef CONFIG_SD_BOOT -/* For SD boot address and size are assigned in terms of sector - * offset and no. of sectors respectively. - */ -#define CONFIG_BS_ADDR_DEVICE 0x00003000 -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00003200 -#define CONFIG_BS_SIZE 0x00000008 -#define CONFIG_BS_HDR_SIZE 0x00000010 -#elif defined(CONFIG_NAND_BOOT) -#define CONFIG_BS_ADDR_DEVICE 0x00600000 -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00640000 -#define CONFIG_BS_SIZE 0x00001000 -#define CONFIG_BS_HDR_SIZE 0x00002000 -#elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_BS_ADDR_DEVICE 0x40600000 -#define CONFIG_BS_HDR_ADDR_DEVICE 0x40640000 -#define CONFIG_BS_SIZE 0x00001000 -#define CONFIG_BS_HDR_SIZE 0x00002000 -#else /* Default NOR Boot */ -#define CONFIG_BS_ADDR_DEVICE 0x60600000 -#define CONFIG_BS_HDR_ADDR_DEVICE 0x60640000 -#define CONFIG_BS_SIZE 0x00001000 -#define CONFIG_BS_HDR_SIZE 0x00002000 -#endif -#define CONFIG_BS_ADDR_RAM 0x81000000 -#define CONFIG_BS_HDR_ADDR_RAM 0x81020000 -#endif - -#ifdef CONFIG_BOOTSCRIPT_COPY_RAM -#define CONFIG_BOOTSCRIPT_ADDR CONFIG_BS_ADDR_RAM -#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM -#else -#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_DEVICE -/* BOOTSCRIPT_ADDR is not required */ -#endif - #ifdef CONFIG_FSL_LS_PPA /* Define the key hash here if SRK used for signing PPA image is * different from SRK hash put in SFP used for U-Boot. @@ -129,7 +34,6 @@ #define PPA_KEY_HASH NULL #endif /* ifdef CONFIG_FSL_LS_PPA */ -#include <config_fsl_chain_trust.h> #endif /* #ifndef CONFIG_SPL_BUILD */ #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */ #endif diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h index b5790bd0bc..0ece4b0906 100644 --- a/arch/arm/include/asm/spl.h +++ b/arch/arm/include/asm/spl.h @@ -6,9 +6,8 @@ #ifndef _ASM_SPL_H_ #define _ASM_SPL_H_ -#if defined(CONFIG_ARCH_OMAP2PLUS) \ - || defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \ - || defined(CONFIG_EXYNOS4210) || defined(CONFIG_ARCH_K3) +#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5) || \ + defined(CONFIG_ARCH_K3) || defined(CONFIG_ARCH_OMAP2PLUS) /* Platform-specific defines */ #include <asm/arch/spl.h> diff --git a/arch/arm/mach-aspeed/ast2600/u-boot-spl.lds b/arch/arm/mach-aspeed/ast2600/u-boot-spl.lds index 22b4e16d35..37f0ccd922 100644 --- a/arch/arm/mach-aspeed/ast2600/u-boot-spl.lds +++ b/arch/arm/mach-aspeed/ast2600/u-boot-spl.lds @@ -40,8 +40,8 @@ SECTIONS } > .nor . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); + __u_boot_list : { + KEEP(*(SORT(__u_boot_list*))); } > .nor . = ALIGN(4); diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index b87639f8c0..11bfd5afe7 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -327,6 +327,13 @@ config AT91_EFLASH Enable the driver for the embedded flash used in the Atmel AT91SAM9XE devices. +config EFLASH_PROTSECTORS + int "Number of flash sectors to protect from erasing" + depends on AT91_EFLASH + help + If non-zero, this will be the number of sectors of the flash to disallow + U-Boot to ease, starting from the beginning of flash. + config AT91_GPIO_PULLUP bool "Keep pullups on peripheral pins" depends on CPU_ARM926EJS @@ -370,8 +377,4 @@ source "board/siemens/corvus/Kconfig" source "board/siemens/taurus/Kconfig" source "board/siemens/smartweb/Kconfig" -config SPL_LDSCRIPT - default "arch/arm/mach-at91/arm926ejs/u-boot-spl.lds" if CPU_ARM926EJS - default "arch/arm/mach-at91/armv7/u-boot-spl.lds" if CPU_V7A - endif diff --git a/arch/arm/mach-at91/arm926ejs/eflash.c b/arch/arm/mach-at91/arm926ejs/eflash.c index 23c24936ed..043f06a827 100644 --- a/arch/arm/mach-at91/arm926ejs/eflash.c +++ b/arch/arm/mach-at91/arm926ejs/eflash.c @@ -120,7 +120,7 @@ unsigned long flash_init(void) if (i%32 == 0) tmp = readl(&eefc->frr); flash_info[0].protect[i] = (tmp >> (i%32)) & 1; -#if defined(CONFIG_EFLASH_PROTSECTORS) +#if CONFIG_VAL(EFLASH_PROTSECTORS) if (i < CONFIG_EFLASH_PROTSECTORS) flash_info[0].protect[i] = 1; #endif @@ -158,7 +158,7 @@ int flash_real_protect (flash_info_t *info, long sector, int prot) debug("protect sector=%ld prot=%d\n", sector, prot); -#if defined(CONFIG_EFLASH_PROTSECTORS) +#if CONFIG_VAL(EFLASH_PROTSECTORS) if (sector < CONFIG_EFLASH_PROTSECTORS) { if (!prot) { printf("eflash: sector %lu cannot be unprotected\n", diff --git a/arch/arm/mach-at91/include/mach/atmel_pio4.h b/arch/arm/mach-at91/include/mach/atmel_pio4.h index c3bd9140df..b712be8051 100644 --- a/arch/arm/mach-at91/include/mach/atmel_pio4.h +++ b/arch/arm/mach-at91/include/mach/atmel_pio4.h @@ -74,6 +74,7 @@ struct atmel_pio4_port { #define AT91_PIO_PORTB 0x1 #define AT91_PIO_PORTC 0x2 #define AT91_PIO_PORTD 0x3 +#define AT91_PIO_PORTE 0x4 int atmel_pio4_set_gpio(u32 port, u32 pin, u32 config); int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 config); diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 6eca8db6d5..25c5db4991 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -134,7 +134,4 @@ endif source "board/davinci/da8xxevm/Kconfig" source "board/lego/ev3/Kconfig" -config SPL_LDSCRIPT - default "board/davinci/da8xxevm/u-boot-spl-da850evm.lds" - endif diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index f73dbbb507..8410290856 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -54,11 +54,15 @@ endchoice if ARCH_EXYNOS4 +config EXYNOS4210 + bool + choice prompt "EXYNOS4 board select" config TARGET_SMDKV310 bool "Exynos4210 SMDKV310 board" + select EXYNOS4210 select OF_CONTROL select SUPPORT_SPL @@ -70,6 +74,7 @@ config TARGET_S5PC210_UNIVERSAL config TARGET_ORIGEN bool "Exynos4412 Origen board" + select EXYNOS4210 select SUPPORT_SPL config TARGET_TRATS2 @@ -83,6 +88,15 @@ endif if ARCH_EXYNOS5 +config EXYNOS5250 + bool + +config EXYNOS5420 + bool + +config EXYNOS5_DT + bool + config SPL_GPIO default y @@ -97,6 +111,8 @@ choice config TARGET_ODROID_XU3 bool "Exynos5422 Odroid board" + select EXYNOS5_DT + select EXYNOS5420 select OF_CONTROL config TARGET_ARNDALE @@ -105,36 +121,49 @@ config TARGET_ARNDALE select ARM_ERRATA_774769 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT + select EXYNOS5250 select OF_CONTROL select SUPPORT_SPL config TARGET_SMDK5250 bool "SMDK5250 board" + select EXYNOS5_DT + select EXYNOS5250 select OF_CONTROL select SUPPORT_SPL config TARGET_SNOW bool "Snow board" + select EXYNOS5_DT + select EXYNOS5250 select OF_CONTROL select SUPPORT_SPL config TARGET_SPRING bool "Spring board" + select EXYNOS5_DT + select EXYNOS5250 select OF_CONTROL select SUPPORT_SPL config TARGET_SMDK5420 bool "SMDK5420 board" + select EXYNOS5_DT + select EXYNOS5420 select OF_CONTROL select SUPPORT_SPL config TARGET_PEACH_PI bool "Peach Pi board" + select EXYNOS5_DT + select EXYNOS5420 select OF_CONTROL select SUPPORT_SPL config TARGET_PEACH_PIT bool "Peach Pit board" + select EXYNOS5_DT + select EXYNOS5420 select OF_CONTROL select SUPPORT_SPL @@ -189,6 +218,16 @@ endif config SYS_SOC default "exynos" +config EXYNOS_ACE_SHA + bool "Advanced Crypto Engine SHA support" + depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && (LIB_HW_RAND || SHA_HW_ACCEL) + default y if ARCH_EXYNOS5 + +config EXYNOS_TMU + bool "Exynos5 thermal management unit support" + depends on ARCH_EXYNOS5 + default y + source "board/samsung/smdkv310/Kconfig" source "board/samsung/trats/Kconfig" source "board/samsung/universal_c210/Kconfig" @@ -201,7 +240,4 @@ source "board/samsung/smdk5420/Kconfig" source "board/samsung/espresso7420/Kconfig" source "board/samsung/axy17lte/Kconfig" -config SPL_LDSCRIPT - default "board/samsung/common/exynos-uboot-spl.lds" if ARCH_EXYNOS5 || ARCH_EXYNOS4 - endif diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index e895c13157..dd097cf541 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -10,8 +10,8 @@ obj-$(CONFIG_ARM64) += mmu-arm64.o obj-$(CONFIG_EXYNOS5420) += sec_boot.o ifdef CONFIG_SPL_BUILD -obj-$(CONFIG_EXYNOS5) += clock_init_exynos5.o -obj-$(CONFIG_EXYNOS5) += dmc_common.o dmc_init_ddr3.o +obj-$(CONFIG_ARCH_EXYNOS5) += clock_init_exynos5.o +obj-$(CONFIG_ARCH_EXYNOS5) += dmc_common.o dmc_init_ddr3.o obj-$(CONFIG_EXYNOS4210)+= dmc_init_exynos4.o clock_init_exynos4.o obj-y += spl_boot.o tzpc.o obj-y += lowlevel_init.o diff --git a/arch/arm/mach-exynos/dmc_init_exynos4.c b/arch/arm/mach-exynos/dmc_init_exynos4.c index ecddc72684..58a3c82f68 100644 --- a/arch/arm/mach-exynos/dmc_init_exynos4.c +++ b/arch/arm/mach-exynos/dmc_init_exynos4.c @@ -175,7 +175,7 @@ void mem_ctrl_init(int reset) * 0: full_sync */ writel(1, ASYNC_CONFIG); -#ifdef CONFIG_ORIGEN +#ifdef CONFIG_TARGET_ORIGEN /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */ writel(APB_SFR_INTERLEAVE_CONF_VAL, EXYNOS4_MIU_BASE + APB_SFR_INTERLEAVE_CONF_OFFSET); diff --git a/arch/arm/mach-exynos/exynos4_setup.h b/arch/arm/mach-exynos/exynos4_setup.h index a08d64a8e2..fbb45eb897 100644 --- a/arch/arm/mach-exynos/exynos4_setup.h +++ b/arch/arm/mach-exynos/exynos4_setup.h @@ -420,7 +420,7 @@ struct mem_timings { #define ABP_SFR_SLV1_SINGLE_ADDRMAP_START_OFFSET 0x828 #define ABP_SFR_SLV1_SINGLE_ADDRMAP_END_OFFSET 0x830 -#ifdef CONFIG_ORIGEN +#ifdef CONFIG_TARGET_ORIGEN /* Interleave: 2Bit, Interleave_bit1: 0x15, Interleave_bit0: 0x7 */ #define APB_SFR_INTERLEAVE_CONF_VAL 0x20001507 #define APB_SFR_ARBRITATION_CONF_VAL 0x00000001 @@ -542,7 +542,7 @@ struct mem_timings { #define CONTROL2_VAL 0x00000000 -#ifdef CONFIG_ORIGEN +#ifdef CONFIG_TARGET_ORIGEN #define TIMINGREF_VAL 0x000000BB #define TIMINGROW_VAL 0x4046654f #define TIMINGDATA_VAL 0x46400506 diff --git a/arch/arm/mach-exynos/include/mach/pwm_backlight.h b/arch/arm/mach-exynos/include/mach/pwm_backlight.h deleted file mode 100644 index c7d3a91e31..0000000000 --- a/arch/arm/mach-exynos/include/mach/pwm_backlight.h +++ /dev/null @@ -1,20 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2012 Samsung Electronics - * - * Author: Donghwa Lee <dh09.lee@samsung.com> - */ - -#ifndef _PWM_BACKLIGHT_H_ -#define _PWM_BACKLIGHT_H_ - -struct pwm_backlight_data { - int pwm_id; - int period; - int max_brightness; - int brightness; -}; - -extern int exynos_pwm_backlight_init(struct pwm_backlight_data *pd); - -#endif /* _PWM_BACKLIGHT_H_ */ diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h index 48f13c7648..5d0bebac57 100644 --- a/arch/arm/mach-exynos/include/mach/system.h +++ b/arch/arm/mach-exynos/include/mach/system.h @@ -116,6 +116,5 @@ struct exynos5_sysreg { void set_usbhost_mode(unsigned int mode); void set_system_display_ctrl(void); -int exynos_lcd_early_init(const void *blob); #endif /* _EXYNOS4_SYSTEM_H */ diff --git a/arch/arm/mach-exynos/lowlevel_init.c b/arch/arm/mach-exynos/lowlevel_init.c index 2645a8ff49..1ff5fcac1b 100644 --- a/arch/arm/mach-exynos/lowlevel_init.c +++ b/arch/arm/mach-exynos/lowlevel_init.c @@ -49,6 +49,10 @@ enum { }; #ifdef CONFIG_EXYNOS5420 + +/* Address for relocating helper code (Last 4 KB of IRAM) */ +#define EXYNOS_RELOCATE_CODE_BASE (CONFIG_IRAM_TOP - 0x1000) + /* * Power up secondary CPUs. */ @@ -56,7 +60,7 @@ static void secondary_cpu_start(void) { v7_enable_smp(EXYNOS5420_INFORM_BASE); svc32_mode_en(); - branch_bx(CONFIG_EXYNOS_RELOCATE_CODE_BASE); + branch_bx(EXYNOS_RELOCATE_CODE_BASE); } /* @@ -153,7 +157,7 @@ static void power_down_core(void) static void secondary_cores_configure(void) { /* Clear secondary boot iRAM base */ - writel(0x0, (CONFIG_EXYNOS_RELOCATE_CODE_BASE + 0x1C)); + writel(0x0, (EXYNOS_RELOCATE_CODE_BASE + 0x1C)); /* set lowpower flag and address */ writel(CPU_RST_FLAG_VAL, CONFIG_LOWPOWER_FLAG); diff --git a/arch/arm/mach-exynos/sec_boot.S b/arch/arm/mach-exynos/sec_boot.S index 59d05e6c01..40c07209e4 100644 --- a/arch/arm/mach-exynos/sec_boot.S +++ b/arch/arm/mach-exynos/sec_boot.S @@ -21,7 +21,7 @@ relocate_wait_code: .ltorg /* * Secondary core waits here until Primary wake it up. - * Below code is copied to CONFIG_EXYNOS_RELOCATE_CODE_BASE. + * Below code is copied to (CONFIG_IRAM_TOP - 0x1000) * This is a workaround code which is supposed to act as a * substitute/supplement to the iROM code. * diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 5e1b20a422..2ba7454457 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -20,13 +20,13 @@ config MU_BASE_SPL config IMX8QM select IMX8 select SUPPORT_SPL - select SPL_RECOVER_DATA_SECTION + select SPL_RECOVER_DATA_SECTION if SPL bool config IMX8QXP select IMX8 select SUPPORT_SPL - select SPL_RECOVER_DATA_SECTION + select SPL_RECOVER_DATA_SECTION if SPL bool config SYS_SOC @@ -57,11 +57,13 @@ config TARGET_COLIBRI_IMX8X config TARGET_DENEB bool "Support i.MX8QXP Capricorn Deneb board" select BOARD_LATE_INIT + select FACTORYSET select IMX8QXP config TARGET_GIEDI bool "Support i.MX8QXP Capricorn Giedi board" select BOARD_LATE_INIT + select FACTORYSET select IMX8QXP config TARGET_IMX8QM_MEK diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c index b4b75f4e6c..70f6444e79 100644 --- a/arch/arm/mach-k3/common.c +++ b/arch/arm/mach-k3/common.c @@ -516,7 +516,7 @@ void spl_enable_dcache(void) #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) phys_addr_t ram_top = CONFIG_SYS_SDRAM_BASE; - dram_init_banksize(); + dram_init(); /* reserve TLB table */ gd->arch.tlb_size = PGTABLE_SIZE; diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c index f503f15f19..e56ca6d0f5 100644 --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@ -355,6 +355,17 @@ static u32 __get_primary_bootmedia(u32 main_devstat, u32 wkup_devstat) return bootmode; } +u32 spl_spi_boot_bus(void) +{ + u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT); + u32 main_devstat = readl(CTRLMMR_MAIN_DEVSTAT); + u32 bootmode = ((wkup_devstat & WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK) >> + WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT) | + ((main_devstat & MAIN_DEVSTAT_BOOT_MODE_B_MASK) << BOOT_MODE_B_SHIFT); + + return (bootmode == BOOT_DEVICE_QSPI) ? 1 : 0; +} + u32 spl_boot_device(void) { u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT); diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c index 988e758629..b3beeca947 100644 --- a/arch/arm/mach-k3/sysfw-loader.c +++ b/arch/arm/mach-k3/sysfw-loader.c @@ -324,9 +324,9 @@ static void *k3_sysfw_get_spi_addr(void) struct udevice *dev; fdt_addr_t addr; int ret; + unsigned int sf_bus = spl_spi_boot_bus(); - ret = uclass_find_device_by_seq(UCLASS_SPI, CONFIG_SF_DEFAULT_BUS, - &dev); + ret = uclass_find_device_by_seq(UCLASS_SPI, sf_bus, &dev); if (ret) return NULL; diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index ca2da003b6..98bb10c2de 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -121,6 +121,18 @@ endchoice config SYS_SOC default "kirkwood" +config KIRKWOOD_RGMII_PAD_1V8 + bool "Configures the I/O voltage of the pads connected gigabit interface to 1.8V" + default y + +config KIRKWOOD_EGIGA_INIT + bool "Enable GbePort0/1 for kernel" + default y + +config KIRKWOOD_PCIE_INIT + bool "Enable PCIe Port0 for kernel" + default y + source "board/Marvell/openrd/Kconfig" source "board/Marvell/dreamplug/Kconfig" source "board/Synology/ds109/Kconfig" diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index 45ee0272f7..90e86ab99b 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -23,9 +23,6 @@ #endif /* CONFIG_KW88F6281 */ #include <asm/arch/soc.h> -#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */ -#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */ -#define CONFIG_KIRKWOOD_PCIE_INIT /* Enable PCIE Port0 for kernel */ #define CONFIG_I2C_MVTWSI_BASE0 KW_TWSI_BASE #define MV_UART_CONSOLE_BASE KW_UART0_BASE @@ -49,8 +46,6 @@ #define __io /* Data, registers and alternate blocks are at the same offset */ /* Each 8-bit ATA register is aligned to a 4-bytes address */ -/* Controller supports 48-bits LBA addressing */ -#define CONFIG_LBA48 /* CONFIG_IDE requires some #defines for ATA registers */ /* ATA registers base is at SATA controller base */ #endif /* CONFIG_IDE */ diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index e1b9180a3b..fa41047476 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -169,6 +169,27 @@ config TI_SECURE_EMIF_PROTECTED_REGION_SIZE using hardware memory firewalls. This value must be smaller than the TI_SECURE_EMIF_TOTAL_REGION_SIZE value. +config SYS_AUTOMATIC_SDRAM_DETECTION + bool + +choice + depends on OMAP44XX || OMAP54XX + prompt "Static or dynamic DDR timing calculations" + default SYS_EMIF_PRECALCULATED_TIMING_REGS + help + For the DDR timing information we can either dynamically determine + the timings to use or use pre-determined timings (based on using the + dynamic method). Default to the static timing information. + +config SYS_EMIF_PRECALCULATED_TIMING_REGS + bool "Use precalcualted timing values" + +config SYS_DEFAULT_LPDDR2_TIMINGS + bool "Use default LPDDR2 timing values" + select SYS_AUTOMATIC_SDRAM_DETECTION + +endchoice + source "arch/arm/mach-omap2/omap3/Kconfig" source "arch/arm/mach-omap2/omap4/Kconfig" @@ -190,7 +211,4 @@ source "board/compulab/cm_t335/Kconfig" source "board/compulab/cm_t43/Kconfig" source "board/phytec/phycore_am335x_r2/Kconfig" -config SPL_LDSCRIPT - default "arch/arm/mach-omap2/u-boot-spl.lds" - endif diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 23865d4c07..bd6b086552 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -138,6 +138,7 @@ config TARGET_DRACO select DM select DM_GPIO select DM_SERIAL + select FACTORYSET imply CMD_DM config TARGET_ETAMIN @@ -146,6 +147,7 @@ config TARGET_ETAMIN select DM select DM_GPIO select DM_SERIAL + select FACTORYSET imply CMD_DM config TARGET_PCM051 @@ -168,6 +170,7 @@ config TARGET_PXM2 select DM select DM_GPIO select DM_SERIAL + select FACTORYSET imply CMD_DM config TARGET_RASTABAN @@ -176,6 +179,7 @@ config TARGET_RASTABAN select DM select DM_GPIO select DM_SERIAL + select FACTORYSET imply CMD_DM config TARGET_RUT @@ -184,6 +188,7 @@ config TARGET_RUT select DM select DM_GPIO select DM_SERIAL + select FACTORYSET imply CMD_DM config TARGET_THUBAN @@ -192,6 +197,7 @@ config TARGET_THUBAN select DM select DM_GPIO select DM_SERIAL + select FACTORYSET imply CMD_DM config TARGET_PDU001 diff --git a/arch/arm/mach-rockchip/rk3368/Kconfig b/arch/arm/mach-rockchip/rk3368/Kconfig index 25afd3cb60..c3249a7be4 100644 --- a/arch/arm/mach-rockchip/rk3368/Kconfig +++ b/arch/arm/mach-rockchip/rk3368/Kconfig @@ -65,9 +65,6 @@ source "board/rockchip/sheep_rk3368/Kconfig" source "board/geekbuying/geekbox/Kconfig" source "board/rockchip/evb_px5/Kconfig" -config SPL_LDSCRIPT - default "arch/arm/cpu/armv8/u-boot-spl.lds" - config SPL_STACK_R_ADDR default 0x04000000 diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index e712a89534..71a7f8dcee 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,9 +1,5 @@ if ARCH_SUNXI -config SPL_LDSCRIPT - default "arch/arm/cpu/arm926ejs/sunxi/u-boot-spl.lds" if MACH_SUNIV - default "arch/arm/cpu/armv7/sunxi/u-boot-spl.lds" if !ARM64 - config IDENT_STRING default " Allwinner Technology" diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 5309be9cc2..09ad2d6f5a 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -178,6 +178,10 @@ source "arch/arm/mach-tegra/tegra124/Kconfig" source "arch/arm/mach-tegra/tegra210/Kconfig" source "arch/arm/mach-tegra/tegra186/Kconfig" +config TEGRA_GPU + bool "Enable setting up the GPU" + depends on TEGRA124 || TEGRA210 + config CMD_ENTERRCM bool "Enable 'enterrcm' command" default y diff --git a/arch/arm/mach-versal/include/mach/hardware.h b/arch/arm/mach-versal/include/mach/hardware.h index 7b728ac110..000af974e8 100644 --- a/arch/arm/mach-versal/include/mach/hardware.h +++ b/arch/arm/mach-versal/include/mach/hardware.h @@ -58,6 +58,10 @@ struct rpu_regs { #define VERSAL_CRP_BASEADDR 0xF1260000 +#define VERSAL_SLCR_BASEADDR 0xF1060000 +#define VERSAL_AXI_MUX_SEL (VERSAL_SLCR_BASEADDR + 0x504) +#define VERSAL_OSPI_LINEAR_MODE BIT(1) + struct crp_regs { u32 reserved0[128]; u32 boot_mode_usr; @@ -82,3 +86,14 @@ struct crp_regs { #define JTAG_MODE 0x00000000 #define BOOT_MODE_USE_ALT 0x100 #define BOOT_MODE_ALT_SHIFT 12 + +#define FLASH_RESET_GPIO 0xc +#define WPROT_CRP 0xF126001C +#define RST_GPIO 0xF1260318 +#define WPROT_LPD_MIO 0xFF080728 +#define WPROT_PMC_MIO 0xF1060828 +#define BOOT_MODE_DIR 0xF1020204 +#define BOOT_MODE_OUT 0xF1020208 +#define MIO_PIN_12 0xF1060030 +#define BANK0_OUTPUT 0xF1020040 +#define BANK0_TRI 0xF1060200 diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index cf2e727916..b4c439b4cd 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,8 +1,5 @@ if ARCH_ZYNQ -config SPL_LDSCRIPT - default "arch/arm/mach-zynq/u-boot-spl.lds" - config SPL_FS_FAT default y diff --git a/arch/m68k/cpu/mcf5445x/Makefile b/arch/m68k/cpu/mcf5445x/Makefile index ba90fc3c34..6a38c4838e 100644 --- a/arch/m68k/cpu/mcf5445x/Makefile +++ b/arch/m68k/cpu/mcf5445x/Makefile @@ -6,4 +6,4 @@ # ccflags-y += -DET_DEBUG extra-y = start.o -obj-y = cpu.o speed.o cpu_init.o interrupts.o pci.o dspi.o +obj-y = cpu.o speed.o cpu_init.o interrupts.o dspi.o diff --git a/arch/m68k/cpu/mcf5445x/pci.c b/arch/m68k/cpu/mcf5445x/pci.c deleted file mode 100644 index d487468d0b..0000000000 --- a/arch/m68k/cpu/mcf5445x/pci.c +++ /dev/null @@ -1,151 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. - * TsiChung Liew (Tsi-Chung.Liew@freescale.com) - */ - -/* - * PCI Configuration space access support - */ -#include <common.h> -#include <pci.h> -#include <asm/io.h> -#include <asm/immap.h> -#include <linux/delay.h> - -#if defined(CONFIG_PCI) -/* System RAM mapped over PCI */ -#define CONFIG_SYS_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) - -#define cfg_read(val, addr, type, op) *val = op((type)(addr)); -#define cfg_write(val, addr, type, op) op((type *)(addr), (val)); - -#define PCI_OP(rw, size, type, op, mask) \ -int pci_##rw##_cfg_##size(struct pci_controller *hose, \ - pci_dev_t dev, int offset, type val) \ -{ \ - u32 addr = PCI_CONF1_ADDRESS(PCI_BUS(dev), PCI_DEV(dev), \ - PCI_FUNC(dev), offset); \ - out_be32(hose->cfg_addr, addr); \ - cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \ - out_be32(hose->cfg_addr, addr & ~PCI_CONF1_ENABLE); \ - return 0; \ -} - -PCI_OP(read, byte, u8 *, in_8, 3) -PCI_OP(read, word, u16 *, in_le16, 2) -PCI_OP(read, dword, u32 *, in_le32, 0) -PCI_OP(write, byte, u8, out_8, 3) -PCI_OP(write, word, u16, out_le16, 2) -PCI_OP(write, dword, u32, out_le32, 0) - -void pci_mcf5445x_init(struct pci_controller *hose) -{ - pci_t *pci = (pci_t *)MMAP_PCI; - pciarb_t *pciarb = (pciarb_t *)MMAP_PCIARB; - gpio_t *gpio = (gpio_t *) MMAP_GPIO; - u32 barEn = 0; - - out_be32(&pciarb->acr, 0x001f001f); - - /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT, - PCIREQ2, PCIGNT2 */ - out_be16(&gpio->par_pci, - GPIO_PAR_PCI_GNT3_GNT3 | GPIO_PAR_PCI_GNT2 | - GPIO_PAR_PCI_GNT1 | GPIO_PAR_PCI_GNT0 | - GPIO_PAR_PCI_REQ3_REQ3 | GPIO_PAR_PCI_REQ2 | - GPIO_PAR_PCI_REQ1 | GPIO_PAR_PCI_REQ0); - - /* Assert reset bit */ - setbits_be32(&pci->gscr, PCI_GSCR_PR); - - setbits_be32(&pci->tcr1, PCI_TCR1_P); - - /* Initiator windows */ - out_be32(&pci->iw0btar, - CONFIG_SYS_PCI_MEM_PHYS | (CONFIG_SYS_PCI_MEM_PHYS >> 16)); - out_be32(&pci->iw1btar, - CONFIG_SYS_PCI_IO_PHYS | (CONFIG_SYS_PCI_IO_PHYS >> 16)); - out_be32(&pci->iw2btar, - CONFIG_SYS_PCI_CFG_PHYS | (CONFIG_SYS_PCI_CFG_PHYS >> 16)); - - out_be32(&pci->iwcr, - PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO | - PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO); - - out_be32(&pci->icr, 0); - - /* Enable bus master and mem access */ - out_be32(&pci->scr, PCI_SCR_B | PCI_SCR_M); - - /* Cache line size and master latency */ - out_be32(&pci->cr1, PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xF8)); - out_be32(&pci->cr2, 0); - -#ifdef CONFIG_SYS_PCI_BAR0 - out_be32(&pci->bar0, PCI_BAR_BAR0(CONFIG_SYS_PCI_BAR0)); - out_be32(&pci->tbatr0, CONFIG_SYS_PCI_TBATR0 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B0E; -#endif -#ifdef CONFIG_SYS_PCI_BAR1 - out_be32(&pci->bar1, PCI_BAR_BAR1(CONFIG_SYS_PCI_BAR1)); - out_be32(&pci->tbatr1, CONFIG_SYS_PCI_TBATR1 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B1E; -#endif -#ifdef CONFIG_SYS_PCI_BAR2 - out_be32(&pci->bar2, PCI_BAR_BAR2(CONFIG_SYS_PCI_BAR2)); - out_be32(&pci->tbatr2, CONFIG_SYS_PCI_TBATR2 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B2E; -#endif -#ifdef CONFIG_SYS_PCI_BAR3 - out_be32(&pci->bar3, PCI_BAR_BAR3(CONFIG_SYS_PCI_BAR3)); - out_be32(&pci->tbatr3, CONFIG_SYS_PCI_TBATR3 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B3E; -#endif -#ifdef CONFIG_SYS_PCI_BAR4 - out_be32(&pci->bar4, PCI_BAR_BAR4(CONFIG_SYS_PCI_BAR4)); - out_be32(&pci->tbatr4, CONFIG_SYS_PCI_TBATR4 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B4E; -#endif -#ifdef CONFIG_SYS_PCI_BAR5 - out_be32(&pci->bar5, PCI_BAR_BAR5(CONFIG_SYS_PCI_BAR5)); - out_be32(&pci->tbatr5, CONFIG_SYS_PCI_TBATR5 | PCI_TBATR_EN); - barEn |= PCI_TCR2_B5E; -#endif - - out_be32(&pci->tcr2, barEn); - - /* Deassert reset bit */ - clrbits_be32(&pci->gscr, PCI_GSCR_PR); - udelay(1000); - - /* Enable PCI bus master support */ - hose->first_busno = 0; - hose->last_busno = 0xff; - - pci_set_region(hose->regions + 0, CONFIG_SYS_PCI_MEM_BUS, CONFIG_SYS_PCI_MEM_PHYS, - CONFIG_SYS_PCI_MEM_SIZE, PCI_REGION_MEM); - - pci_set_region(hose->regions + 1, CONFIG_SYS_PCI_IO_BUS, CONFIG_SYS_PCI_IO_PHYS, - CONFIG_SYS_PCI_IO_SIZE, PCI_REGION_IO); - - pci_set_region(hose->regions + 2, CONFIG_SYS_PCI_SYS_MEM_BUS, - CONFIG_SYS_PCI_SYS_MEM_PHYS, CONFIG_SYS_PCI_SYS_MEM_SIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - hose->region_count = 3; - - hose->cfg_addr = &(pci->car); - hose->cfg_data = (volatile unsigned char *)CONFIG_SYS_PCI_CFG_BUS; - - pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word, - pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word, - pci_write_cfg_dword); - - /* Hose scan */ - pci_register_hose(hose); - hose->last_busno = pci_hose_scan(hose); -} -#endif /* CONFIG_PCI */ diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h index 221eb93d58..bad0026648 100644 --- a/arch/m68k/include/asm/config.h +++ b/arch/m68k/include/asm/config.h @@ -6,6 +6,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #endif diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h index 221eb93d58..bad0026648 100644 --- a/arch/microblaze/include/asm/config.h +++ b/arch/microblaze/include/asm/config.h @@ -6,6 +6,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #endif diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h index 221eb93d58..bad0026648 100644 --- a/arch/mips/include/asm/config.h +++ b/arch/mips/include/asm/config.h @@ -6,6 +6,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #endif diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index d1b9ae4c3c..9a31604ba3 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -11,6 +11,11 @@ config E300 config SYS_CPU default "mpc83xx" +config SYS_83XX_DDR_USES_CS0 + bool + help + DDR should be configured using CS0 and CS1 instead of CS2 and CS3. + choice prompt "Target select" optional @@ -19,6 +24,7 @@ config TARGET_MPC837XERDB bool "Support MPC837XERDB" select ARCH_MPC837X select BOARD_EARLY_INIT_F + select SYS_83XX_DDR_USES_CS0 config TARGET_IDS8313 bool "Support ids8313" diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c index e3e1bfd65a..33835eeec2 100644 --- a/arch/powerpc/cpu/mpc83xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c @@ -251,19 +251,6 @@ void cpu_init_f (volatile immap_t * im) im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT; im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR; #endif -#if defined(CONFIG_USB_EHCI_FSL) && defined(CONFIG_ARCH_MPC831X) - uint32_t temp; - struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR; - - /* Configure interface. */ - setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN); - - /* Wait for clock to stabilize */ - do { - temp = __raw_readl(&ehci->control); - udelay(1000); - } while (!(temp & PHY_CLK_VALID)); -#endif } int cpu_init_r (void) diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index c1b4e94d91..915e28e110 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -109,6 +109,7 @@ config TARGET_QEMU_PPCE500 bool "Support qemu-ppce500" select ARCH_QEMU_E500 select PHYS_64BIT + select SYS_RAMBOOT imply OF_HAS_PRIOR_STAGE config TARGET_T1024RDB @@ -187,6 +188,7 @@ config ARCH_B4420 select E500MC select E6500 select FSL_LAW + select HETROGENOUS_CLUSTERS select SYS_FSL_DDR_VER_47 select SYS_FSL_ERRATUM_A004477 select SYS_FSL_ERRATUM_A005871 @@ -195,7 +197,7 @@ config ARCH_B4420 select SYS_FSL_ERRATUM_A006475 select SYS_FSL_ERRATUM_A006593 select SYS_FSL_ERRATUM_A007075 - select SYS_FSL_ERRATUM_A007186 + select SYS_FSL_ERRATUM_A007186 if CHAIN_OF_TRUST select SYS_FSL_ERRATUM_A007212 select SYS_FSL_ERRATUM_A009942 select SYS_FSL_HAS_DDR3 @@ -214,6 +216,7 @@ config ARCH_B4860 select E500MC select E6500 select FSL_LAW + select HETROGENOUS_CLUSTERS select SYS_FSL_DDR_VER_47 select SYS_FSL_ERRATUM_A004477 select SYS_FSL_ERRATUM_A005871 @@ -222,7 +225,7 @@ config ARCH_B4860 select SYS_FSL_ERRATUM_A006475 select SYS_FSL_ERRATUM_A006593 select SYS_FSL_ERRATUM_A007075 - select SYS_FSL_ERRATUM_A007186 + select SYS_FSL_ERRATUM_A007186 if CHAIN_OF_TRUST select SYS_FSL_ERRATUM_A007212 select SYS_FSL_ERRATUM_A007907 select SYS_FSL_ERRATUM_A009942 @@ -733,7 +736,7 @@ config ARCH_T2080 select SYS_FSL_DDR_VER_47 select SYS_FSL_ERRATUM_A006379 select SYS_FSL_ERRATUM_A006593 - select SYS_FSL_ERRATUM_A007186 + select SYS_FSL_ERRATUM_A007186 if CHAIN_OF_TRUST select SYS_FSL_ERRATUM_A007212 select SYS_FSL_ERRATUM_A007815 select SYS_FSL_ERRATUM_A007907 @@ -766,7 +769,7 @@ config ARCH_T4240 select SYS_FSL_ERRATUM_A006261 select SYS_FSL_ERRATUM_A006379 select SYS_FSL_ERRATUM_A006593 - select SYS_FSL_ERRATUM_A007186 + select SYS_FSL_ERRATUM_A007186 if CHAIN_OF_TRUST select SYS_FSL_ERRATUM_A007798 select SYS_FSL_ERRATUM_A007815 select SYS_FSL_ERRATUM_A007907 @@ -822,11 +825,8 @@ config FSL_LAW help Use Freescale common code for Local Access Window -config NXP_ESBC - bool "NXP_ESBC" - help - Enable Freescale Secure Boot feature. Normally selected - by defconfig. If unsure, do not change. +config HETROGENOUS_CLUSTERS + bool config MAX_CPUS int "Maximum number of CPUs permitted for MPC85xx" @@ -1121,6 +1121,35 @@ config SYS_NUM_TLBCAMS Number of TLB CAM entries for Book-E chips. 64 for E500MC, 16 for other E500 SoCs. +if HETROGENOUS_CLUSTERS + +config SYS_MAPLE + def_bool y + +config SYS_CPRI + def_bool y + +config PPC_CLUSTER_START + int + default 0 + +config DSP_CLUSTER_START + int + default 1 + +config SYS_CPRI_CLK + int + default 3 + +config SYS_ULB_CLK + int + default 4 + +config SYS_ETVPE_CLK + int + default 1 +endif + config BACKSIDE_L2_CACHE bool @@ -1185,6 +1214,45 @@ config SYS_FSL_LBC_CLK_DIV Defines divider of platform clock(clock input to eLBC controller). +config ENABLE_36BIT_PHYS + bool "Enable 36bit physical address space support" + +config SYS_BOOK3E_HV + bool "Category E.HV is supported" + depends on BOOKE + +config SYS_CPC_REINIT_F + bool + help + The CPC is configured as SRAM at the time of U-Boot entry and is + required to be re-initialized. + +config SYS_FSL_CPC + bool "Corenet Platform Cache support" + +config SYS_MPC85XX_NO_RESETVEC + bool "Discard resetvec section and move bootpg section up" + depends on MPC85xx + help + If this variable is specified, the section .resetvec is not kept and + the section .bootpg is placed in the previous 4k of the .text section. + +config SPL_SYS_MPC85XX_NO_RESETVEC + bool "Discard resetvec section and move bootpg section up, in SPL" + depends on MPC85xx && SPL + help + If this variable is specified, the section .resetvec is not kept and + the section .bootpg is placed in the previous 4k of the .text section, + of the SPL portion of the binary. + +config TPL_SYS_MPC85XX_NO_RESETVEC + bool "Discard resetvec section and move bootpg section up, in TPL" + depends on MPC85xx && TPL + help + If this variable is specified, the section .resetvec is not kept and + the section .bootpg is placed in the previous 4k of the .text section, + of the SPL portion of the binary. + config FSL_VIA bool diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 9a28269020..8a6340d800 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -1126,9 +1126,8 @@ switch_as: #else /* Calculate absolute address in FLASH and jump there */ /*--------------------------------------------------------------*/ - lis r3,CONFIG_VAL(SYS_MONITOR_BASE)@h - ori r3,r3,CONFIG_VAL(SYS_MONITOR_BASE)@l - addi r3,r3,_start_cont - _start_cont + lis r3,_start_cont@h + ori r3,r3,_start_cont@l mtlr r3 blr #endif @@ -1600,7 +1599,7 @@ relocate_code: * initialization, now running from RAM. */ - addi r0,r10,in_ram - _start_cont + addi r0,r10,in_ram - CONFIG_VAL(SYS_MONITOR_BASE) /* * As IVPR is going to point RAM address, diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index 06a70ff2af..62c3c51dea 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -9,24 +9,15 @@ #include "config.h" OUTPUT_ARCH(powerpc) -#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC -PHDRS -{ - text PT_LOAD; - bss PT_LOAD; -} -#endif + SECTIONS { + . = IMAGE_TEXT_BASE; + .text : { /* For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec */ -#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC - .bootpg IMAGE_TEXT_BASE - 0x1000 : - { +#if CONFIG_IS_ENABLED(SYS_MPC85XX_NO_RESETVEC) KEEP(*(.bootpg)) - } :text = 0xffff #endif - . = IMAGE_TEXT_BASE; - .text : { *(.text*) } _etext = .; @@ -75,7 +66,7 @@ SECTIONS #endif /* For nor and nand is needed the SPL with section .resetvec */ -#ifndef CONFIG_SYS_MPC85XX_NO_RESETVEC +#if !CONFIG_IS_ENABLED(SYS_MPC85XX_NO_RESETVEC) #if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */ #ifndef BOOT_PAGE_OFFSET #define BOOT_PAGE_OFFSET 0x1000 diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds index 8bbe319b3e..8fba712655 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds @@ -14,32 +14,22 @@ OUTPUT_ARCH(powerpc) ENTRY(_start) -PHDRS -{ - text PT_LOAD; - bss PT_LOAD; -} - SECTIONS { /* Read-only sections, merged into text segment: */ -#ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC - .bootpg CONFIG_SYS_TEXT_BASE - 0x1000 : + .text : { +#if CONFIG_IS_ENABLED(SYS_MPC85XX_NO_RESETVEC) KEEP(arch/powerpc/cpu/mpc85xx/start.o (.bootpg)) - } :text = 0xffff - . = CONFIG_SYS_TEXT_BASE; #endif - .text : - { *(.text*) - } :text + } _etext = .; PROVIDE (etext = .); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } :text + } /* Read-write section, merged into data segment: */ . = (. + 0x00FF) & 0xFFFFFF00; @@ -84,16 +74,16 @@ SECTIONS __init_end = .; _end = .; -#ifndef CONFIG_SYS_MPC85XX_NO_RESETVEC +#if !CONFIG_IS_ENABLED(SYS_MPC85XX_NO_RESETVEC) .bootpg RESET_VECTOR_ADDRESS - 0xffc : { arch/powerpc/cpu/mpc85xx/start.o (.bootpg) - } :text = 0xffff + } = 0xffff .resetvec RESET_VECTOR_ADDRESS : { KEEP(*(.resetvec)) - } :text = 0xffff + } = 0xffff . = RESET_VECTOR_ADDRESS + 0x4; @@ -115,7 +105,7 @@ SECTIONS *(.sbss*) *(.bss*) *(COMMON) - } :bss + } . = ALIGN(4); __bss_end = . ; diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 67f8b10001..871554a7f4 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -17,10 +17,6 @@ #include <phy.h> #include <hwconfig.h> -#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 -#endif - #if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) static int ft_del_cpuhandle(void *blob, int cpuhandle) { diff --git a/arch/powerpc/dts/p2020-post.dtsi b/arch/powerpc/dts/p2020-post.dtsi index 0d0cd2273c..ea215ab075 100644 --- a/arch/powerpc/dts/p2020-post.dtsi +++ b/arch/powerpc/dts/p2020-post.dtsi @@ -13,49 +13,6 @@ compatible = "fsl,p2020-immr", "simple-bus"; bus-frequency = <0x0>; - usb@22000 { - compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; - reg = <0x22000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <28 0x2 0 0>; - phy_type = "ulpi"; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <4>; - reg = <0x40000 0x40000>; - compatible = "fsl,mpic"; - device_type = "open-pic"; - big-endian; - single-cpu-affinity; - last-interrupt-source = <255>; - }; - - esdhc: sdhc@2e000 { - compatible = "fsl,p2020-esdhc", "fsl,esdhc"; - reg = <0x2e000 0x1000>; - interrupts = <72 0x2 0 0>; - /* Filled in by U-Boot */ - clock-frequency = <0>; - }; - - espi0: spi@7000 { - compatible = "fsl,mpc8536-espi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x7000 0x1000>; - interrupts = < 0x3b 0x02 0x00 0x00 >; - fsl,espi-num-chipselects = <4>; - }; - -/include/ "pq3-i2c-0.dtsi" -/include/ "pq3-i2c-1.dtsi" -/include/ "pq3-duart-0.dtsi" -/include/ "pq3-gpio-0.dtsi" - ecm-law@0 { compatible = "fsl,ecm-law"; reg = <0x0 0x1000>; @@ -74,6 +31,22 @@ interrupts = <18 2 0 0>; }; +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + + espi0: spi@7000 { + compatible = "fsl,mpc8536-espi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7000 0x1000>; + interrupts = < 0x3b 0x02 0x00 0x00 >; + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-dma-1.dtsi" +/include/ "pq3-gpio-0.dtsi" + L2: l2-cache-controller@20000 { compatible = "fsl,p2020-l2-cache-controller"; reg = <0x20000 0x1000>; @@ -83,7 +56,15 @@ }; /include/ "pq3-dma-0.dtsi" -/include/ "pq3-dma-1.dtsi" + + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <28 0x2 0 0>; + phy_type = "ulpi"; + }; /include/ "pq3-etsec1-0.dtsi" /include/ "pq3-etsec1-timer-0.dtsi" @@ -95,6 +76,14 @@ /include/ "pq3-etsec1-1.dtsi" /include/ "pq3-etsec1-2.dtsi" + esdhc: sdhc@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2 0 0>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + /include/ "pq3-sec3.1-0.dtsi" /include/ "pq3-mpic.dtsi" /include/ "pq3-mpic-timer-B.dtsi" diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h index 059ffe1fd4..79fe567b58 100644 --- a/arch/powerpc/include/asm/config.h +++ b/arch/powerpc/include/asm/config.h @@ -14,8 +14,6 @@ #define HWCONFIG_BUFFER_SIZE 256 #endif -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #ifndef CONFIG_MAX_MEM_MAPPED #if defined(CONFIG_E500) || \ defined(CONFIG_MPC86xx) || \ diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 47bfcc7244..a43e6e5e53 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -18,8 +18,6 @@ /* IP endianness */ #define CONFIG_SYS_FSL_IFC_BE -#define CONFIG_SYS_FSL_SFP_BE -#define CONFIG_SYS_FSL_SEC_MON_BE #if defined(CONFIG_ARCH_MPC8548) #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1 @@ -31,35 +29,27 @@ #elif defined(CONFIG_ARCH_P1010) #define CONFIG_FSL_SDHC_V2_3 #define CONFIG_TSECV2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_ESDHC_HC_BLK_ADDR /* P1011 is single core version of P1020 */ #elif defined(CONFIG_ARCH_P1011) #define CONFIG_TSECV2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #elif defined(CONFIG_ARCH_P1020) #define CONFIG_TSECV2 -#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#endif #elif defined(CONFIG_ARCH_P1021) #define CONFIG_TSECV2 #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #elif defined(CONFIG_ARCH_P1023) #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_QMAN_NUM_PORTALS 3 #define CONFIG_SYS_BMAN_NUM_PORTALS 3 #define CONFIG_SYS_FM_MURAM_SIZE 0x10000 @@ -68,11 +58,9 @@ /* P1024 is lower end variant of P1020 */ #elif defined(CONFIG_ARCH_P1024) #define CONFIG_TSECV2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* P1025 is lower end variant of P1021 */ #elif defined(CONFIG_ARCH_P1025) -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_TSECV2 #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 @@ -84,7 +72,6 @@ #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #define CONFIG_SYS_FSL_RMU #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #elif defined(CONFIG_ARCH_P2041) /* also supports P2040 */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ @@ -92,9 +79,6 @@ #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 #define CONFIG_SYS_NUM_FM1_10GEC 1 -#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 -#endif #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 32 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" @@ -118,7 +102,6 @@ #define CONFIG_SYS_FSL_USB1_PHY_ENABLE #define CONFIG_SYS_FSL_USB2_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -132,7 +115,6 @@ #define CONFIG_SYS_NUM_FM2_DTSEC 4 #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_SYS_NUM_FM2_10GEC 1 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie" @@ -151,7 +133,6 @@ #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_SYS_NUM_FM2_DTSEC 5 #define CONFIG_SYS_NUM_FM2_10GEC 1 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_FM_MURAM_SIZE 0x28000 #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" @@ -163,16 +144,13 @@ #elif defined(CONFIG_ARCH_BSC9131) #define CONFIG_FSL_SDHC_V2_3 #define CONFIG_TSECV2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 #define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 -#define CONFIG_ESDHC_HC_BLK_ADDR #elif defined(CONFIG_ARCH_BSC9132) #define CONFIG_FSL_SDHC_V2_3 #define CONFIG_TSECV2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FSL_DSP_DDR_ADDR 0x40000000 #define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000 #define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000 @@ -180,7 +158,6 @@ #define CONFIG_SYS_FSL_IFC_BANK_COUNT 3 #define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" -#define CONFIG_ESDHC_HC_BLK_ADDR #elif defined(CONFIG_ARCH_T4240) #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ @@ -204,7 +181,6 @@ #define CONFIG_SYS_FSL_SRDS_3 #define CONFIG_SYS_FSL_SRDS_4 #define CONFIG_SYS_NUM_FMAN 2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_PME_CLK 0 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_FMAN_V3 @@ -219,33 +195,21 @@ #define CONFIG_SYS_FSL_SRIO_LIODN #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY -#define CONFIG_SYS_FSL_SFP_VER_3_0 -#define CONFIG_SYS_FSL_PCI_VER_3_X #elif defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ #define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ -#define CONFIG_HETROGENOUS_CLUSTERS /* DSP/SC3900 core clusters */ -#define CONFIG_PPC_CLUSTER_START 0 /*Start index of ppc clusters*/ -#define CONFIG_DSP_CLUSTER_START 1 /*Start index of dsp clusters*/ #define CONFIG_SYS_FSL_SRDS_1 #define CONFIG_SYS_FSL_SRDS_2 -#define CONFIG_SYS_MAPLE -#define CONFIG_SYS_CPRI #define CONFIG_SYS_FSL_NUM_CC_PLLS 5 #define CONFIG_SYS_NUM_FMAN 1 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FM1_CLK 0 -#define CONFIG_SYS_CPRI_CLK 3 -#define CONFIG_SYS_ULB_CLK 4 -#define CONFIG_SYS_ETVPE_CLK 1 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 4 #define CONFIG_SYS_FMAN_V3 #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 #define CONFIG_SYS_FSL_TBCLK_DIV 16 #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4" #define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_SFP_VER_3_0 #ifdef CONFIG_ARCH_B4860 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4 @@ -255,7 +219,6 @@ #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 } #define CONFIG_SYS_NUM_FM1_DTSEC 6 #define CONFIG_SYS_NUM_FM1_10GEC 2 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 @@ -278,7 +241,6 @@ #define CONFIG_SYS_FSL_SRDS_1 #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_NUM_FM1_DTSEC 5 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_PME_PLAT_CLK_DIV 2 #define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 @@ -295,7 +257,6 @@ #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 -#define CONFIG_SYS_FSL_SFP_VER_3_0 #elif defined(CONFIG_ARCH_T1024) #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ @@ -309,7 +270,6 @@ #define CONFIG_SYS_NUM_FM1_DTSEC 4 #define CONFIG_SYS_NUM_FM1_10GEC 1 #define CONFIG_FSL_FM_10GEC_REGULAR_NOTATION -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_SYS_FSL_IFC_BANK_COUNT 8 #define CONFIG_SYS_FM1_CLK 0 #define CONFIG_QBMAN_CLK_DIV 1 @@ -323,7 +283,6 @@ #define QE_MURAM_SIZE 0x6000UL #define MAX_QE_RISC 1 #define QE_NUM_OF_SNUM 28 -#define CONFIG_SYS_FSL_SFP_VER_3_0 #elif defined(CONFIG_ARCH_T2080) #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ @@ -333,7 +292,6 @@ #define CONFIG_SYS_NUM_FMAN 1 #define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 } #define CONFIG_SYS_FSL_SRDS_1 -#define CONFIG_SYS_FSL_PCI_VER_3_X #if defined(CONFIG_ARCH_T2080) #define CONFIG_SYS_NUM_FM1_DTSEC 8 #define CONFIG_SYS_NUM_FM1_10GEC 4 @@ -343,7 +301,6 @@ #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 #endif -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_PME_PLAT_CLK_DIV 1 #define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV #define CONFIG_SYS_FM1_CLK 0 @@ -354,10 +311,8 @@ #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0" #define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY -#define CONFIG_SYS_FSL_SFP_VER_3_0 #define CONFIG_SYS_FSL_ISBC_VER 2 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE -#define CONFIG_SYS_FSL_SFP_VER_3_0 #elif defined(CONFIG_ARCH_C29X) diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 3a1d858ec6..3e707600f2 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -10,28 +10,17 @@ #ifdef CONFIG_NXP_ESBC #if defined(CONFIG_FSL_CORENET) #define CONFIG_SYS_PBI_FLASH_BASE 0xc0000000 -#elif defined(CONFIG_TARGET_BSC9132QDS) -#define CONFIG_SYS_PBI_FLASH_BASE 0xc8000000 -#elif defined(CONFIG_TARGET_C29XPCIE) -#define CONFIG_SYS_PBI_FLASH_BASE 0xcc000000 #else #define CONFIG_SYS_PBI_FLASH_BASE 0xce000000 #endif #define CONFIG_SYS_PBI_FLASH_WINDOW 0xcff80000 -#if defined(CONFIG_TARGET_B4860QDS) || \ - defined(CONFIG_TARGET_B4420QDS) || \ - defined(CONFIG_TARGET_T4240QDS) || \ - defined(CONFIG_TARGET_T2080QDS) || \ +#if defined(CONFIG_TARGET_T2080QDS) || \ defined(CONFIG_TARGET_T2080RDB) || \ defined(CONFIG_TARGET_T1042RDB) || \ defined(CONFIG_TARGET_T1042D4RDB) || \ defined(CONFIG_TARGET_T1042RDB_PI) || \ defined(CONFIG_ARCH_T1024) -#ifndef CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_CPC_REINIT_F -#endif -#define CONFIG_KEY_REVOCATION #undef CONFIG_SYS_INIT_L3_ADDR #define CONFIG_SYS_INIT_L3_ADDR 0xbff00000 #endif @@ -47,10 +36,6 @@ #endif #endif -#if defined(CONFIG_TARGET_C29XPCIE) -#define CONFIG_KEY_REVOCATION -#endif - #if defined(CONFIG_ARCH_P3041) || \ defined(CONFIG_ARCH_P4080) || \ defined(CONFIG_ARCH_P5040) || \ @@ -80,55 +65,9 @@ #define CONFIG_SPL_SPAACT_ADDR 0x2f000000 #define CONFIG_SPL_JR0_LIODN_S 454 #define CONFIG_SPL_JR0_LIODN_NS 458 -/* - * Define the key hash for U-Boot here if public/private key pair used to - * sign U-boot are different from the SRK hash put in the fuse - * Example of defining KEY_HASH is - * #define CONFIG_SPL_UBOOT_KEY_HASH \ - * "41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b" - * else leave it defined as NULL - */ - -#define CONFIG_SPL_UBOOT_KEY_HASH NULL #endif /* ifdef CONFIG_SPL_BUILD */ -#define CONFIG_FSL_SEC_MON - #ifndef CONFIG_SPL_BUILD -/* - * fsl_setenv_chain_of_trust() must be called from - * board_late_init() - */ - -/* If Boot Script is not on NOR and is required to be copied on RAM */ -#ifdef CONFIG_BOOTSCRIPT_COPY_RAM -#define CONFIG_BS_HDR_ADDR_RAM 0x00010000 -#define CONFIG_BS_HDR_ADDR_DEVICE 0x00800000 -#define CONFIG_BS_HDR_SIZE 0x00002000 -#define CONFIG_BS_ADDR_RAM 0x00012000 -#define CONFIG_BS_ADDR_DEVICE 0x00802000 -#define CONFIG_BS_SIZE 0x00001000 - -#define CONFIG_BOOTSCRIPT_HDR_ADDR CONFIG_BS_HDR_ADDR_RAM -#else - -/* The bootscript header address is different for B4860 because the NOR - * mapping is different on B4 due to reduced NOR size. - */ -#if defined(CONFIG_TARGET_B4860QDS) || defined(CONFIG_TARGET_B4420QDS) -#define CONFIG_BOOTSCRIPT_HDR_ADDR 0xecc00000 -#elif defined(CONFIG_FSL_CORENET) -#define CONFIG_BOOTSCRIPT_HDR_ADDR 0xe8e00000 -#elif defined(CONFIG_TARGET_BSC9132QDS) -#define CONFIG_BOOTSCRIPT_HDR_ADDR 0x88020000 -#elif defined(CONFIG_TARGET_C29XPCIE) -#define CONFIG_BOOTSCRIPT_HDR_ADDR 0xec020000 -#else -#define CONFIG_BOOTSCRIPT_HDR_ADDR 0xee020000 -#endif - -#endif /* #ifdef CONFIG_BOOTSCRIPT_COPY_RAM */ - #include <config_fsl_chain_trust.h> #endif /* #ifndef CONFIG_SPL_BUILD */ #endif /* #ifdef CONFIG_CHAIN_OF_TRUST */ diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h index d2443dc90d..6d1ddbcd27 100644 --- a/arch/powerpc/include/asm/immap_83xx.h +++ b/arch/powerpc/include/asm/immap_83xx.h @@ -666,19 +666,6 @@ typedef struct immap { u8 res7[0xC0000]; } immap_t; -#ifndef CONFIG_ARCH_MPC834X -#ifdef CONFIG_HAS_FSL_MPH_USB -#define CONFIG_SYS_MPC83xx_USB1_OFFSET 0x22000 /* use the MPH controller */ -#define CONFIG_SYS_MPC83xx_USB2_OFFSET 0 -#else -#define CONFIG_SYS_MPC83xx_USB1_OFFSET 0 -#define CONFIG_SYS_MPC83xx_USB2_OFFSET 0x23000 /* use the DR controller */ -#endif -#else -#define CONFIG_SYS_MPC83xx_USB1_OFFSET 0x22000 -#define CONFIG_SYS_MPC83xx_USB2_OFFSET 0x23000 -#endif - #elif defined(CONFIG_ARCH_MPC8313) typedef struct immap { sysconf83xx_t sysconf; /* System configuration */ @@ -944,15 +931,6 @@ struct ccsr_gpio { #define CONFIG_SYS_MPC83xx_ESDHC_ADDR \ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET) -#ifndef CONFIG_SYS_MPC83xx_USB1_OFFSET -#define CONFIG_SYS_MPC83xx_USB1_OFFSET 0x23000 -#endif -#define CONFIG_SYS_MPC83xx_USB1_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB1_OFFSET) -#if defined(CONFIG_ARCH_MPC834X) -#define CONFIG_SYS_MPC83xx_USB2_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB2_OFFSET) -#endif #define CONFIG_SYS_LBC_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->im_lbc) #define CONFIG_SYS_TSEC1_OFFSET 0x24000 diff --git a/arch/riscv/include/asm/config.h b/arch/riscv/include/asm/config.h index d911007537..c55c85d4e6 100644 --- a/arch/riscv/include/asm/config.h +++ b/arch/riscv/include/asm/config.h @@ -7,6 +7,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #endif diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 7cbfd6c972..7e86c6a0cd 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -945,6 +945,7 @@ config ACPI_GPE config SPL_ACPI_GPE bool "Support ACPI general-purpose events in SPL" + depends on SPL help Enable a driver for ACPI GPEs to allow peripherals to send interrupts via ACPI to the OS. In U-Boot this is only used when U-Boot itself @@ -956,6 +957,7 @@ config SPL_ACPI_GPE config TPL_ACPI_GPE bool "Support ACPI general-purpose events in TPL" + depends on TPL help Enable a driver for ACPI GPEs to allow peripherals to send interrupts via ACPI to the OS. In U-Boot this is only used when U-Boot itself diff --git a/arch/x86/include/asm/config.h b/arch/x86/include/asm/config.h index 221eb93d58..bad0026648 100644 --- a/arch/x86/include/asm/config.h +++ b/arch/x86/include/asm/config.h @@ -6,6 +6,4 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #endif diff --git a/arch/xtensa/dts/Makefile b/arch/xtensa/dts/Makefile index fbbdefaf2c..c22c50ac4e 100644 --- a/arch/xtensa/dts/Makefile +++ b/arch/xtensa/dts/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0+ -dtb-$(CONFIG_XTFPGA) += ml605.dtb ml605_nommu.dtb kc705.dtb kc705_nommu.dtb +dtb-$(CONFIG_XTENSA) += ml605.dtb ml605_nommu.dtb kc705.dtb kc705_nommu.dtb include $(srctree)/scripts/Makefile.dts |