diff options
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 12 | ||||
| -rw-r--r-- | arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 | 29 | ||||
| -rw-r--r-- | arch/arm/dts/fsl-ls2080a-qds.dts | 14 | ||||
| -rw-r--r-- | arch/arm/dts/fsl-ls2080a.dtsi | 10 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h | 4 | ||||
| -rw-r--r-- | board/freescale/ls2080aqds/eth.c | 5 | ||||
| -rw-r--r-- | board/freescale/ls2080aqds/ls2080aqds.c | 19 | ||||
| -rw-r--r-- | board/freescale/ls2080ardb/eth_ls2080rdb.c | 5 | ||||
| -rw-r--r-- | configs/ls2080aqds_nand_defconfig | 9 | ||||
| -rw-r--r-- | configs/ls2080aqds_qspi_defconfig | 37 | ||||
| -rw-r--r-- | drivers/i2c/i2c_core.c | 5 | ||||
| -rw-r--r-- | drivers/i2c/mxc_i2c.c | 27 | ||||
| -rw-r--r-- | include/configs/ls2080a_common.h | 11 | ||||
| -rw-r--r-- | include/configs/ls2080a_simu.h | 7 | ||||
| -rw-r--r-- | include/configs/ls2080aqds.h | 43 | ||||
| -rw-r--r-- | include/i2c.h | 3 |
17 files changed, 234 insertions, 10 deletions
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index 9a5a6b53f7..297687d3c6 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -636,6 +636,9 @@ int timer_init(void) #ifdef CONFIG_FSL_LSCH3 u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR; #endif +#ifdef CONFIG_LS2080A + u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET; +#endif #ifdef COUNTER_FREQUENCY_REAL unsigned long cntfrq = COUNTER_FREQUENCY_REAL; @@ -650,6 +653,15 @@ int timer_init(void) out_le32(cltbenr, 0xf); #endif +#ifdef CONFIG_LS2080A + /* + * In certain Layerscape SoCs, the clock for each core's + * has an enable bit in the PMU Physical Core Time Base Enable + * Register (PCTBENR), which allows the watchdog to operate. + */ + setbits_le32(pctbenr, 0xff); +#endif + /* Enable clock for timer * This is a global setting. */ diff --git a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 index f9323c1d28..da5e052569 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 +++ b/arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch3 @@ -121,6 +121,35 @@ mcboottimeout: MC boot timeout in milliseconds. If this variable is not defined mcmemsize: MC DRAM block size. If this variable is not defined, the value CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE will be assumed. +mcinitcmd: This environment variable is defined to initiate MC and DPL deployment + from the location where it is stored(NOR, NAND, SD, SATA, USB)during + u-boot booting.If this variable is not defined then MC_BOOT_ENV_VAR + will be null and MC will not be booted and DPL will not be applied + during U-boot booting.However the MC, DPC and DPL can be applied from + console independently. + The variable needs to be set from the console once and then on + rebooting the parameters set in the varible will automatically be + executed. The commmand is demostrated taking an example of mc boot + using NOR Flash i.e. MC, DPL, and DPC is stored in the NOR flash: + + cp.b 0xa0000000 0x580300000 $filesize + cp.b 0x80000000 0x580800000 $filesize + cp.b 0x90000000 0x580700000 $filesize + + setenv mcinitcmd 'fsl_mc start mc 0x580300000 0x580800000' + + If only linux is to be booted then the mcinitcmd environment should be set as + + setenv mcinitcmd 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x580700000' + + Here the addresses 0xa0000000, 0x80000000, 0x80000000 are of DDR to where + MC binary, DPC binary and DPL binary are stored and 0x580300000, 0x580800000 + and 0x580700000 are addresses in NOR where these are copied. It is to be + noted that these addresses in 'fsl_mc start mc 0x580300000 0x580800000;fsl_mc apply DPL 0x580700000' + can be replaced with the addresses of DDR to + which these will be copied in case of these binaries being stored in other + devices like SATA, USB, NAND, SD etc. + Booting from NAND ------------------- Booting from NAND requires two images, RCW and u-boot-with-spl.bin. diff --git a/arch/arm/dts/fsl-ls2080a-qds.dts b/arch/arm/dts/fsl-ls2080a-qds.dts index 547ec27837..0a7f1ffb2d 100644 --- a/arch/arm/dts/fsl-ls2080a-qds.dts +++ b/arch/arm/dts/fsl-ls2080a-qds.dts @@ -15,6 +15,7 @@ compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; aliases { + spi0 = &qspi; spi1 = &dspi; }; }; @@ -51,3 +52,16 @@ reg = <2>; }; }; + +&qspi { + bus-num = <0>; + status = "okay"; + + qflash0: s25fs256s@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi index a5c579c5a5..68ed133853 100644 --- a/arch/arm/dts/fsl-ls2080a.dtsi +++ b/arch/arm/dts/fsl-ls2080a.dtsi @@ -126,4 +126,14 @@ interrupts = <0 26 0x4>; /* Level high type */ num-cs = <6>; }; + + qspi: quadspi@1550000 { + compatible = "fsl,vf610-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + num-cs = <4>; + }; }; diff --git a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h index 1cebe2fbb0..df877ddc7d 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/cpu.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/cpu.h @@ -122,6 +122,8 @@ static const struct sys_mmu_table early_mmu_table[] = { PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, { CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_BASE, CONFIG_SYS_FSL_OCRAM_SIZE, MT_NORMAL, PTE_BLOCK_NON_SHARE }, + { CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1, + CONFIG_SYS_FSL_QSPI_SIZE1, MT_NORMAL, PTE_BLOCK_NON_SHARE}, /* For IFC Region #1, only the first 4MB is cache-enabled */ { CONFIG_SYS_FSL_IFC_BASE1, CONFIG_SYS_FSL_IFC_BASE1, CONFIG_SYS_FSL_IFC_SIZE1_1, MT_NORMAL, PTE_BLOCK_NON_SHARE }, @@ -176,6 +178,8 @@ static const struct sys_mmu_table final_mmu_table[] = { { CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_BASE1, CONFIG_SYS_FSL_DRAM_SIZE1, MT_NORMAL, PTE_BLOCK_OUTER_SHARE | PTE_BLOCK_NS }, + { CONFIG_SYS_FSL_QSPI_BASE1, CONFIG_SYS_FSL_QSPI_BASE1, + CONFIG_SYS_FSL_QSPI_SIZE1, MT_NORMAL, PTE_BLOCK_NON_SHARE}, { CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_BASE2, CONFIG_SYS_FSL_QSPI_SIZE2, MT_DEVICE_NGNRNE, PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 65b3357009..8d12d6cb93 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -26,6 +26,7 @@ #define CONFIG_SYS_FSL_TIMER_ADDR 0x023d0000 #define CONFIG_SYS_FSL_PMU_CLTBENR (CONFIG_SYS_FSL_PMU_ADDR + \ 0x18A0) +#define FSL_PMU_PCTBENR_OFFSET (CONFIG_SYS_FSL_PMU_ADDR + 0x8A0) #define CONFIG_SYS_FSL_WRIOP1_ADDR (CONFIG_SYS_IMMR + 0x7B80000) #define CONFIG_SYS_FSL_WRIOP1_MDIO1 (CONFIG_SYS_FSL_WRIOP1_ADDR + 0x16000) @@ -128,6 +129,8 @@ #define DCFG_PORSR1_RCW_SRC_NOR 0x12f00000 #define DCFG_RCWSR13 0x130 #define DCFG_RCWSR13_DSPI (0 << 8) +#define DCFG_RCWSR15 0x138 +#define DCFG_RCWSR15_IFCGRPABASE_QSPI 0x3 #define DCFG_DCSR_BASE 0X700100000ULL #define DCFG_DCSR_PORCR1 0x000 @@ -139,6 +142,7 @@ /* Supplemental Configuration */ #define SCFG_BASE 0x01fc0000 #define SCFG_USB3PRM1CR 0x000 +#define SCFG_QSPICLKCTLR 0x10 #define TP_ITYP_AV 0x00000001 /* Initiator available */ #define TP_ITYP_TYPE(x) (((x) & 0x6) >> 1) /* Initiator Type */ diff --git a/board/freescale/ls2080aqds/eth.c b/board/freescale/ls2080aqds/eth.c index 33ad7dcf3e..95ff68b364 100644 --- a/board/freescale/ls2080aqds/eth.c +++ b/board/freescale/ls2080aqds/eth.c @@ -20,6 +20,7 @@ #include "ls2080aqds_qixis.h" +#define MC_BOOT_ENV_VAR "mcinitcmd" #ifdef CONFIG_FSL_MC_ENET /* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks. @@ -714,6 +715,7 @@ void ls2080a_handle_phy_interface_xsgmii(int i) int board_eth_init(bd_t *bis) { int error; + char *mc_boot_env_var; #ifdef CONFIG_FSL_MC_ENET struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR; int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) & @@ -781,6 +783,9 @@ int board_eth_init(bd_t *bis) } } + mc_boot_env_var = getenv(MC_BOOT_ENV_VAR); + if (mc_boot_env_var) + run_command_list(mc_boot_env_var, -1, 0); error = cpu_eth_init(bis); if (hwconfig_f("xqsgmii", env_hwconfig)) { diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c index 897793d85b..477f55646f 100644 --- a/board/freescale/ls2080aqds/ls2080aqds.c +++ b/board/freescale/ls2080aqds/ls2080aqds.c @@ -26,6 +26,7 @@ #define PIN_MUX_SEL_SDHC 0x00 #define PIN_MUX_SEL_DSPI 0x0a +#define SCFG_QSPICLKCTRL_DIV_20 (5 << 27) #define SET_SDHC_MUX_SEL(reg, value) ((reg & 0xf0) | value) @@ -80,6 +81,8 @@ int checkboard(void) puts("PromJet\n"); else if (sw == 0x9) puts("NAND\n"); + else if (sw == 0xf) + puts("QSPI\n"); else if (sw == 0x15) printf("IFCCard\n"); else @@ -207,6 +210,15 @@ int board_init(void) else config_board_mux(MUX_TYPE_SDHC); +#if defined(CONFIG_NAND) && defined(CONFIG_FSL_QSPI) + val = in_le32(dcfg_ccsr + DCFG_RCWSR15 / 4); + + if (DCFG_RCWSR15_IFCGRPABASE_QSPI == (val & (u32)0x3)) + QIXIS_WRITE(brdcfg[9], + (QIXIS_READ(brdcfg[9]) & 0xf8) | + FSL_QIXIS_BRDCFG9_QSPI); +#endif + #ifdef CONFIG_ENV_IS_NOWHERE gd->env_addr = (ulong)&default_environment[0]; #endif @@ -218,7 +230,14 @@ int board_init(void) int board_early_init_f(void) { +#ifdef CONFIG_SYS_I2C_EARLY_INIT + i2c_early_init_f(); +#endif fsl_lsch3_early_init_f(); +#ifdef CONFIG_FSL_QSPI + /* input clk: 1/2 platform clk, output: input/20 */ + out_le32(SCFG_BASE + SCFG_QSPICLKCTLR, SCFG_QSPICLKCTRL_DIV_20); +#endif return 0; } diff --git a/board/freescale/ls2080ardb/eth_ls2080rdb.c b/board/freescale/ls2080ardb/eth_ls2080rdb.c index 58ea746547..799799c251 100644 --- a/board/freescale/ls2080ardb/eth_ls2080rdb.c +++ b/board/freescale/ls2080ardb/eth_ls2080rdb.c @@ -20,9 +20,11 @@ DECLARE_GLOBAL_DATA_PTR; +#define MC_BOOT_ENV_VAR "mcinitcmd" int board_eth_init(bd_t *bis) { #if defined(CONFIG_FSL_MC_ENET) + char *mc_boot_env_var; int i, interface; struct memac_mdio_info mdio_info; struct mii_dev *dev; @@ -89,6 +91,9 @@ int board_eth_init(bd_t *bis) } } + mc_boot_env_var = getenv(MC_BOOT_ENV_VAR); + if (mc_boot_env_var) + run_command_list(mc_boot_env_var, -1, 0); cpu_eth_init(bis); #endif /* CONFIG_FMAN_ENET */ diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig index 8c5b69d77f..dc1649299a 100644 --- a/configs/ls2080aqds_nand_defconfig +++ b/configs/ls2080aqds_nand_defconfig @@ -8,6 +8,14 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, NAND, LS2080A" CONFIG_BOOTDELAY=10 CONFIG_HUSH_PARSER=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" +CONFIG_OF_CONTROL=y +CONFIG_SPL_DISABLE_OF_CONTROL=y +CONFIG_OF_EMBED=y +CONFIG_DM=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y CONFIG_CMD_GREPENV=y CONFIG_CMD_MMC=y CONFIG_CMD_I2C=y @@ -19,6 +27,7 @@ CONFIG_CMD_PING=y CONFIG_CMD_CACHE=y CONFIG_CMD_EXT2=y CONFIG_CMD_FAT=y +CONFIG_CMD_SF=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETDEVICES=y CONFIG_E1000=y diff --git a/configs/ls2080aqds_qspi_defconfig b/configs/ls2080aqds_qspi_defconfig new file mode 100644 index 0000000000..0850a68bfd --- /dev/null +++ b/configs/ls2080aqds_qspi_defconfig @@ -0,0 +1,37 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS2080AQDS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,QSPI_BOOT,LS2080A" +CONFIG_BOOTDELAY=10 +CONFIG_HUSH_PARSER=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls2080a-qds" +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y +CONFIG_DM=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DM_SPI=y +CONFIG_FSL_QSPI=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MMC=y +CONFIG_CMD_I2C=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_FAT=y +CONFIG_CMD_SF=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SYS_NS16550=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_OF_LIBFDT=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/drivers/i2c/i2c_core.c b/drivers/i2c/i2c_core.c index 41cc3b8fa4..16b1aba32a 100644 --- a/drivers/i2c/i2c_core.c +++ b/drivers/i2c/i2c_core.c @@ -233,6 +233,11 @@ __weak void i2c_init_board(void) { } +/* implement possible for i2c specific early i2c init */ +__weak void i2c_early_init_f(void) +{ +} + /* * i2c_init_all(): * diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 445fa21082..f3402089a8 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -32,6 +32,14 @@ DECLARE_GLOBAL_DATA_PTR; #define IMX_I2C_REGSHIFT 2 #define VF610_I2C_REGSHIFT 0 + +#define I2C_EARLY_INIT_INDEX 0 +#ifdef CONFIG_SYS_I2C_IFDR_DIV +#define I2C_IFDR_DIV_CONSERVATIVE CONFIG_SYS_I2C_IFDR_DIV +#else +#define I2C_IFDR_DIV_CONSERVATIVE 0x7e +#endif + /* Register index */ #define IADR 0 #define IFDR 1 @@ -660,6 +668,25 @@ void bus_i2c_init(int index, int speed, int unused, } /* + * Early init I2C for prepare read the clk through I2C. + */ +void i2c_early_init_f(void) +{ + ulong base = mxc_i2c_buses[I2C_EARLY_INIT_INDEX].base; + bool quirk = mxc_i2c_buses[I2C_EARLY_INIT_INDEX].driver_data + & I2C_QUIRK_FLAG ? true : false; + int reg_shift = quirk ? VF610_I2C_REGSHIFT : IMX_I2C_REGSHIFT; + + /* Set I2C divider value */ + writeb(I2C_IFDR_DIV_CONSERVATIVE, base + (IFDR << reg_shift)); + /* Reset module */ + writeb(I2CR_IDIS, base + (I2CR << reg_shift)); + writeb(0, base + (I2SR << reg_shift)); + /* Enable I2C */ + writeb(I2CR_IEN, base + (I2CR << reg_shift)); +} + +/* * Init I2C Bus */ static void mxc_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 2bf524f69a..ebe1415421 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -29,11 +29,13 @@ #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ /* Link Definitions */ +#ifndef CONFIG_QSPI_BOOT #ifdef CONFIG_SPL #define CONFIG_SYS_TEXT_BASE 0x80400000 #else #define CONFIG_SYS_TEXT_BASE 0x30100000 #endif +#endif #ifdef CONFIG_EMU #define CONFIG_SYS_NO_FLASH @@ -138,13 +140,6 @@ #define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000 -#ifndef CONFIG_SYS_NO_FLASH -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_FLASH_QUIET_TEST -#endif - #ifndef __ASSEMBLY__ unsigned long long get_qixis_addr(void); #endif @@ -289,7 +284,7 @@ unsigned long long get_qixis_addr(void); #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000 -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MONITOR_LEN (640 * 1024) #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h index 7563aafbc6..7f245b5fad 100644 --- a/include/configs/ls2080a_simu.h +++ b/include/configs/ls2080a_simu.h @@ -30,6 +30,13 @@ #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +#ifndef CONFIG_SYS_NO_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_QUIET_TEST +#endif + /* * NOR Flash Timing Params */ diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index b44066c407..df1455bef3 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -17,6 +17,16 @@ unsigned long get_board_ddr_clk(void); #endif #define CONFIG_SYS_FSL_CLK + +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SYS_NO_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_EARLY_INIT +#define CONFIG_SYS_I2C_IFDR_DIV 0x7e +#endif + +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk() #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ/4) @@ -162,11 +172,13 @@ unsigned long get_board_ddr_clk(void); #define QIXIS_LBMAP_DFLTBANK 0x00 #define QIXIS_LBMAP_ALTBANK 0x04 #define QIXIS_LBMAP_NAND 0x09 +#define QIXIS_LBMAP_QSPI 0x0f #define QIXIS_RST_CTL_RESET 0x31 #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 #define QIXIS_RCFG_CTL_RECONFIG_START 0x21 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 #define QIXIS_RCW_SRC_NAND 0x107 +#define QIXIS_RCW_SRC_QSPI 0x62 #define QIXIS_RST_FORCE_MEM 0x01 #define CONFIG_SYS_CSPR3_EXT (0x0) @@ -227,7 +239,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_SPL_PAD_TO 0x20000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 * 1024) -#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 * 1024) +#define CONFIG_SYS_NAND_U_BOOT_SIZE (640 * 1024) #else #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR_EARLY @@ -257,11 +269,19 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 +#if defined(CONFIG_QSPI_BOOT) +#define CONFIG_SYS_TEXT_BASE 0x20010000 +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif +#endif /* Debug Server firmware */ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR @@ -279,8 +299,27 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#ifdef CONFIG_FSL_DSPI +#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI) #define CONFIG_SPI_FLASH + +#ifdef CONFIG_FSL_DSPI +#define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_EON +#endif + +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define FSL_QSPI_FLASH_SIZE (1 << 26) /* 64MB */ +#define FSL_QSPI_FLASH_NUM 4 +#endif +/* + * Verify QSPI when boot from NAND, QIXIS brdcfg9 need configure. + * If boot from on-board NAND, ISO1 = 1, ISO2 = 0, IBOOT = 0 + * If boot from IFCCard NAND, ISO1 = 0, ISO2 = 0, IBOOT = 1 + */ +#define FSL_QIXIS_BRDCFG9_QSPI 0x1 + #endif /* diff --git a/include/i2c.h b/include/i2c.h index 1f5ae4538a..d500445aaf 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -701,6 +701,9 @@ extern struct i2c_bus_hose i2c_bus[]; * Initialization, must be called once on start up, may be called * repeatedly to change the speed and slave addresses. */ +#ifdef CONFIG_SYS_I2C_EARLY_INIT +void i2c_early_init_f(void); +#endif void i2c_init(int speed, int slaveaddr); void i2c_init_board(void); #ifdef CONFIG_SYS_I2C_BOARD_LATE_INIT |