aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/arm/dts/rk3368-lion.dts2
-rw-r--r--arch/arm/dts/rk3399-firefly.dts4
-rw-r--r--arch/arm/dts/rk3399-puma.dtsi64
-rw-r--r--common/spl/Kconfig3
-rw-r--r--configs/evb-rk3399_defconfig1
-rw-r--r--configs/firefly-rk3399_defconfig1
-rw-r--r--doc/README.rockchip6
-rw-r--r--include/configs/evb_rk3229.h2
-rw-r--r--include/configs/kylin_rk3036.h2
-rw-r--r--include/configs/lion_rk3368.h1
-rw-r--r--include/configs/puma_rk3399.h8
-rw-r--r--include/configs/rk3036_common.h1
-rw-r--r--include/configs/rk3188_common.h1
-rw-r--r--include/configs/rk322x_common.h1
-rw-r--r--include/configs/rk3288_common.h1
-rw-r--r--include/configs/rk3328_common.h1
-rw-r--r--include/configs/rk3399_common.h1
-rw-r--r--include/configs/rock.h14
-rw-r--r--include/configs/rockchip-common.h16
-rw-r--r--include/configs/sheep_rk3368.h1
20 files changed, 52 insertions, 79 deletions
diff --git a/arch/arm/dts/rk3368-lion.dts b/arch/arm/dts/rk3368-lion.dts
index 850db500e4..f018b8b146 100644
--- a/arch/arm/dts/rk3368-lion.dts
+++ b/arch/arm/dts/rk3368-lion.dts
@@ -68,7 +68,7 @@
phy-supply = <&vcc33_io>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio3 11 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <2 10000 50000>;
assigned-clocks = <&cru SCLK_MAC>;
diff --git a/arch/arm/dts/rk3399-firefly.dts b/arch/arm/dts/rk3399-firefly.dts
index 31e3ba8a47..f134c00688 100644
--- a/arch/arm/dts/rk3399-firefly.dts
+++ b/arch/arm/dts/rk3399-firefly.dts
@@ -332,10 +332,10 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
+ regulator-suspend-microvolt = <3000000>;
};
};
diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi
index 65ab380139..96bd4fec01 100644
--- a/arch/arm/dts/rk3399-puma.dtsi
+++ b/arch/arm/dts/rk3399-puma.dtsi
@@ -36,13 +36,13 @@
module_led {
label = "module_led";
- gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
sd_card_led {
label = "sd_card_led";
- gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
};
@@ -94,8 +94,7 @@
compatible = "regulator-fixed";
regulator-name = "usbhub_enable";
enable-active-low;
- gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
- regulator-always-on;
+ gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -111,8 +110,8 @@
compatible = "regulator-fixed";
u-boot,dm-pre-reloc;
regulator-name = "bios_enable";
- enable-active-low;
- gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
@@ -140,7 +139,7 @@
vcc5v0_otg: vcc5v0-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
- gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "vcc5v0_otg";
@@ -150,7 +149,7 @@
vcc5v0_host: vcc5v0-host-regulator {
compatible = "regulator-fixed";
enable-active-low;
- gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "vcc5v0_host";
@@ -196,7 +195,7 @@
phy-supply = <&vcc_phy>;
phy-mode = "rgmii";
clock_in_out = "input";
- snps,reset-gpio = <&gpio3 16 GPIO_ACTIVE_LOW>;
+ snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
snps,reset-delays-us = <2 10000 50000>;
assigned-clocks = <&cru SCLK_RMII_SRC>;
@@ -224,7 +223,7 @@
vdd_gpu: fan535555@60 {
compatible = "fcs,fan53555";
reg = <0x60>;
- vsel-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
vin-supply = <&vcc5v0_sys>;
regulator-compatible = "fan53555-reg";
regulator-name = "vdd_gpu";
@@ -348,11 +347,11 @@
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
+ regulator-max-microvolt = <3000000>;
regulator-name = "vcc_sd";
regulator-state-mem {
regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
+ regulator-suspend-microvolt = <3000000>;
};
};
@@ -426,7 +425,7 @@
vdd_cpu_b: fan53555@60 {
compatible = "fcs,fan53555";
reg = <0x60>;
- vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
vin-supply = <&vcc5v0_sys>;
regulator-compatible = "fan53555-reg";
regulator-name = "vdd_cpu_b";
@@ -469,7 +468,7 @@
assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
assigned-clock-rates = <100000000>;
- ep-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+ ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
num-lanes = <4>;
pinctrl-names = "default";
pinctrl-0 = <&pcie_clkreqn>;
@@ -524,23 +523,23 @@
};
&usb_host0_ehci {
- status = "okay";
+ status = "disabled";
};
&usb_host0_ohci {
- status = "okay";
+ status = "disabled";
};
&dwc3_typec0 {
- status = "disabled";
+ status = "okay";
};
&usb_host1_ehci {
- status = "okay";
+ status = "disabled";
};
&usb_host1_ohci {
- status = "okay";
+ status = "disabled";
};
&dwc3_typec1 {
@@ -564,42 +563,43 @@
puma_pin_hog: puma_pin_hog {
rockchip,pins =
/* We need pull-ups on Q7 buttons */
- <0 4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */
- <0 10 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */
- <0 11 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */
- <0 9 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */
+ <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */
+ <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */
+ <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */
+ <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */
};
};
pmic {
pmic_int_l: pmic-int-l {
rockchip,pins =
- <1 22 RK_FUNC_GPIO &pcfg_pull_up>;
+ <RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
leds_pins_puma: led_pins@0 {
rockchip,pins =
- <2 25 RK_FUNC_GPIO &pcfg_pull_none>,
- <1 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ <RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
+ <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
usb2 {
otg_vbus_drv: otg-vbus-drv {
rockchip,pins =
- <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
host_vbus_drv: host-vbus-drv {
rockchip,pins =
- <0 2 RK_FUNC_GPIO &pcfg_pull_none>;
+ <RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
i2c8 {
i2c8_xfer_a: i2c8-xfer {
- rockchip,pins = <1 21 RK_FUNC_1 &pcfg_pull_up>,
- <1 20 RK_FUNC_1 &pcfg_pull_up>;
+ rockchip,pins =
+ <RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>,
+ <RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>;
};
};
};
@@ -624,8 +624,8 @@
&i2c6_xfer {
/* Enable pull-ups, the pins would float otherwise. */
rockchip,pins =
- <2 10 RK_FUNC_2 &pcfg_pull_up>,
- <2 9 RK_FUNC_2 &pcfg_pull_up>;
+ <RK_GPIO2 RK_PB2 RK_FUNC_2 &pcfg_pull_up>,
+ <RK_GPIO2 RK_PB1 RK_FUNC_2 &pcfg_pull_up>;
};
&i2c7 {
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 0bd8370337..e987c07f5a 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -142,11 +142,12 @@ config SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
default 0x50 if ARCH_SUNXI
default 0x75 if ARCH_DAVINCI
default 0x8a if ARCH_MX6
- default 0x100 if ARCH_ROCKCHIP || ARCH_UNIPHIER
+ default 0x100 if ARCH_UNIPHIER
default 0x140 if ARCH_MVEBU
default 0x200 if ARCH_SOCFPGA || ARCH_AT91
default 0x300 if ARCH_ZYNQ || ARCH_KEYSTONE || OMAP34XX || OMAP44XX || \
OMAP54XX || AM33XX || AM43XX
+ default 0x4000 if ARCH_ROCKCHIP
help
Address on the MMC to load U-Boot from, when the MMC is being used
in raw mode. Units: MMC sectors (1 sector = 512 bytes).
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk3399_defconfig
index 42df743cbe..7b5ea821f9 100644
--- a/configs/evb-rk3399_defconfig
+++ b/configs/evb-rk3399_defconfig
@@ -12,7 +12,6 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_GPT=y
CONFIG_CMD_MMC=y
diff --git a/configs/firefly-rk3399_defconfig b/configs/firefly-rk3399_defconfig
index 262048843f..dc3cda4260 100644
--- a/configs/firefly-rk3399_defconfig
+++ b/configs/firefly-rk3399_defconfig
@@ -12,7 +12,6 @@ CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
CONFIG_SPL_ATF_SUPPORT=y
CONFIG_SPL_ATF_TEXT_BASE=0x00010000
CONFIG_CMD_BOOTZ=y
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 4b7be0b715..9d5af3d53d 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -99,13 +99,13 @@ To write an image that boots from an SD card (assumed to be /dev/sdc):
./firefly-rk3288/tools/mkimage -n rk3288 -T rksd -d \
firefly-rk3288/spl/u-boot-spl-dtb.bin out && \
sudo dd if=out of=/dev/sdc seek=64 && \
- sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=256
+ sudo dd if=firefly-rk3288/u-boot-dtb.img of=/dev/sdc seek=16384
This puts the Rockchip header and SPL image first and then places the U-Boot
-image at block 256 (i.e. 128KB from the start of the SD card). This
+image at block 16384 (i.e. 4MB from the start of the SD card). This
corresponds with this setting in U-Boot:
- #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 256
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x4000
Put this SD (or micro-SD) card into your board and reset it. You should see
something like:
diff --git a/include/configs/evb_rk3229.h b/include/configs/evb_rk3229.h
index 8906c8f0b1..ae981f7610 100644
--- a/include/configs/evb_rk3229.h
+++ b/include/configs/evb_rk3229.h
@@ -11,8 +11,6 @@
/* Store env in emmc */
-#undef CONFIG_ENV_SIZE
-#define CONFIG_ENV_SIZE (32 << 10)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 0
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
diff --git a/include/configs/kylin_rk3036.h b/include/configs/kylin_rk3036.h
index 36009b8599..d2d630d610 100644
--- a/include/configs/kylin_rk3036.h
+++ b/include/configs/kylin_rk3036.h
@@ -13,8 +13,6 @@
#ifndef CONFIG_SPL_BUILD
/* Store env in emmc */
-#undef CONFIG_ENV_SIZE
-#define CONFIG_ENV_SIZE SZ_32K
#define CONFIG_SYS_MMC_ENV_DEV 0 /* emmc */
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
diff --git a/include/configs/lion_rk3368.h b/include/configs/lion_rk3368.h
index 4118ffd65b..c40dbadc15 100644
--- a/include/configs/lion_rk3368.h
+++ b/include/configs/lion_rk3368.h
@@ -13,6 +13,5 @@
#define KERNEL_LOAD_ADDR 0x280000
#define DTB_LOAD_ADDR 0x5600000
#define INITRD_LOAD_ADDR 0x5bf0000
-#define CONFIG_ENV_SIZE 0x2000
#endif
diff --git a/include/configs/puma_rk3399.h b/include/configs/puma_rk3399.h
index e481a28ae9..39d0786266 100644
--- a/include/configs/puma_rk3399.h
+++ b/include/configs/puma_rk3399.h
@@ -17,7 +17,15 @@
#undef CONFIG_ENV_OFFSET
#define CONFIG_ENV_OFFSET (240 * 1024)
+#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 1
+#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
+#define CONFIG_ENV_SECT_SIZE (8 * 1024)
+#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+#endif
#define SDRAM_BANK_SIZE (2UL << 30)
diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h
index 9ac0df57de..4ed8f5a6c7 100644
--- a/include/configs/rk3036_common.h
+++ b/include/configs/rk3036_common.h
@@ -10,7 +10,6 @@
#include "rockchip-common.h"
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h
index 5e462346be..cfa5364710 100644
--- a/include/configs/rk3188_common.h
+++ b/include/configs/rk3188_common.h
@@ -14,7 +14,6 @@
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h
index fa9abc0a56..b22169d163 100644
--- a/include/configs/rk322x_common.h
+++ b/include/configs/rk322x_common.h
@@ -10,7 +10,6 @@
#include "rockchip-common.h"
#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
index 34f255847a..2b8f618f72 100644
--- a/include/configs/rk3288_common.h
+++ b/include/configs/rk3288_common.h
@@ -12,7 +12,6 @@
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h
index 9819b22ce2..af556323f8 100644
--- a/include/configs/rk3328_common.h
+++ b/include/configs/rk3328_common.h
@@ -9,7 +9,6 @@
#include "rockchip-common.h"
-#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index 1d7a87271c..561bfa73b6 100644
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -10,7 +10,6 @@
#include "rockchip-common.h"
#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SKIP_LOWLEVEL_INIT
diff --git a/include/configs/rock.h b/include/configs/rock.h
index 8d845d95e3..468dfdbff9 100644
--- a/include/configs/rock.h
+++ b/include/configs/rock.h
@@ -12,18 +12,4 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
-#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)
-/* SPL @ 32k for 34k
- * u-boot directly after @ 68k for 400k or so
- * ENV @ 992k
- */
-#define CONFIG_ENV_OFFSET ((1024-32) * 1024)
-#else
-/* SPL @ 32k for ~36k
- * ENV @ 96k
- * u-boot @ 128K
- */
-#define CONFIG_ENV_OFFSET (96 * 1024)
-#endif
-
#endif
diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
index 96b5fce46f..35d948ae29 100644
--- a/include/configs/rockchip-common.h
+++ b/include/configs/rockchip-common.h
@@ -61,19 +61,11 @@
#endif
-#if CONFIG_IS_ENABLED(ROCKCHIP_BACK_TO_BROM)
-/* SPL @ 32k for 34k
- * u-boot directly after @ 68k for 400k or so
- * ENV @ 992k
- */
-#define CONFIG_ENV_OFFSET ((1024-32) * 1024)
-#else
-/* SPL @ 32k for ~36k
- * ENV @ 96k
- * u-boot @ 128K
+/*
+ * Rockchip SoCs use fixed ENV 32KB@(4MB-32KB)
*/
-#define CONFIG_ENV_OFFSET (96 * 1024)
-#endif
+#define CONFIG_ENV_OFFSET (SZ_4M - SZ_32K)
+#define CONFIG_ENV_SIZE SZ_32K
#define CONFIG_DISPLAY_BOARDINFO_LATE
diff --git a/include/configs/sheep_rk3368.h b/include/configs/sheep_rk3368.h
index eac9755bba..4eb4fb0e2f 100644
--- a/include/configs/sheep_rk3368.h
+++ b/include/configs/sheep_rk3368.h
@@ -13,7 +13,6 @@
#define KERNEL_LOAD_ADDR 0x280000
#define DTB_LOAD_ADDR 0x5600000
#define INITRD_LOAD_ADDR 0x5bf0000
-#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_CONSOLE_SCROLL_LINES 10
generated by cgit v1.2.3 (git 2.39.1) at 2025-06-02 22:42:47 +0000