diff options
98 files changed, 1827 insertions, 3023 deletions
@@ -1052,8 +1052,13 @@ MKIMAGEFLAGS_fit-dtb.blob = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ -a 0 -e 0 -E \ $(patsubst %,-b arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) -d /dev/null +ifneq ($(EXT_DTB),) +u-boot-fit-dtb.bin: u-boot-nodtb.bin $(EXT_DTB) + $(call if_changed,cat) +else u-boot-fit-dtb.bin: u-boot-nodtb.bin $(FINAL_DTB_CONTAINER) $(call if_changed,cat) +endif u-boot.bin: u-boot-fit-dtb.bin FORCE $(call if_changed,copy) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4640f3b3bd..f58f8fb235 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -857,6 +857,8 @@ config ARCH_SUNXI select DM_ETH select DM_GPIO select DM_KEYBOARD + select DM_MMC if MMC + select DM_SCSI if SCSI select DM_SERIAL select DM_USB if DISTRO_DEFAULTS select OF_BOARD_SETUP diff --git a/arch/arm/dts/am57xx-cl-som-am57x.dts b/arch/arm/dts/am57xx-cl-som-am57x.dts deleted file mode 100644 index 203266f884..0000000000 --- a/arch/arm/dts/am57xx-cl-som-am57x.dts +++ /dev/null @@ -1,617 +0,0 @@ -/* - * Support for CompuLab CL-SOM-AM57x System-on-Module - * - * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ - * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include "dra74x.dtsi" - -/ { - model = "CompuLab CL-SOM-AM57x"; - compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */ - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_pins_default>; - - led0 { - label = "cl-som-am57x:green"; - gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - vdd_3v3: fixedregulator-vdd_3v3 { - compatible = "regulator-fixed"; - regulator-name = "vdd_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ads7846reg: fixedregulator-ads7846-reg { - compatible = "regulator-fixed"; - regulator-name = "ads7846-reg"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - sound0: sound0 { - compatible = "simple-audio-card"; - simple-audio-card,name = "CL-SOM-AM57x-Sound-Card"; - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&dailink0_master>; - simple-audio-card,frame-master = <&dailink0_master>; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Microphone", "Microphone Jack", - "Line", "Line Jack"; - simple-audio-card,routing = - "Headphone Jack", "RHPOUT", - "Headphone Jack", "LHPOUT", - "LLINEIN", "Line Jack", - "MICIN", "Mic Bias", - "Mic Bias", "Microphone Jack"; - - dailink0_master: simple-audio-card,cpu { - sound-dai = <&mcasp3>; - }; - - simple-audio-card,codec { - sound-dai = <&wm8731>; - system-clock-frequency = <12000000>; - }; - }; -}; - -&dra7_pmx_core { - leds_pins_default: leds_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14) /* gpmc_a15.gpio2_5 */ - >; - }; - - i2c1_pins_default: i2c1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */ - DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */ - >; - }; - - i2c3_pins_default: i2c3_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ - DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */ - >; - }; - - i2c4_pins_default: i2c4_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10) /* mcasp1_acl.i2c4_sda */ - DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10) /* mcasp1_fsr.i2c4_scl */ - >; - }; - - tps659038_pins_default: tps659038_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */ - >; - }; - - mmc2_pins_default: mmc2_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */ - DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */ - DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */ - DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */ - DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */ - DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */ - DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */ - DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */ - DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */ - DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */ - >; - }; - - qspi1_pins: pinmux_qspi1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */ - DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d0 */ - DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d1 */ - DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */ - DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ - DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */ - >; - }; - - cpsw_pins_default: cpsw_pins_default { - pinctrl-single,pins = < - /* Slave at addr 0x0 */ - DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tclk */ - DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0) /* rgmii0_tctl */ - DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3 */ - DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td2 */ - DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td1 */ - DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0) /* rgmii0_td0 */ - DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */ - DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */ - DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */ - DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */ - DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */ - DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */ - - /* Slave at addr 0x1 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_tclk */ - DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ - >; - }; - - cpsw_pins_sleep: cpsw_pins_sleep { - pinctrl-single,pins = < - /* Slave 1 */ - DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15) - - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15) - >; - }; - - davinci_mdio_pins_default: davinci_mdio_pins_default { - pinctrl-single,pins = < - /* MDIO */ - DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */ - DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d11.mdio_d */ - >; - }; - - davinci_mdio_pins_sleep: davinci_mdio_pins_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15) - >; - }; - - ads7846_pins: pinmux_ads7846_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */ - >; - }; - - mcasp3_pins_default: mcasp3_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ - DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ - DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */ - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */ - >; - }; - - mcasp3_pins_sleep: mcasp3_pins_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15) - >; - }; -}; - -&i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_default>; - clock-frequency = <400000>; -}; - -&i2c3 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_default>; - clock-frequency = <400000>; -}; - -&i2c4 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins_default>; - clock-frequency = <400000>; - - tps659038: tps659038@58 { - compatible = "ti,tps659038"; - reg = <0x58>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - pinctrl-names = "default"; - pinctrl-0 = <&tps659038_pins_default>; - - #interrupt-cells = <2>; - interrupt-controller; - - ti,system-power-controller; - - tps659038_pmic { - compatible = "ti,tps659038-pmic"; - - regulators { - smps12_reg: smps12 { - /* VDD_MPU */ - regulator-name = "smps12"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps3_reg: smps3 { - /* VDD_DDR */ - regulator-name = "smps3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - smps45_reg: smps45 { - /* VDD_DSPEVE */ - regulator-name = "smps45"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps6_reg: smps6 { - /* VDD_GPU */ - regulator-name = "smps6"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps7_reg: smps7 { - /* VDD_CORE */ - regulator-name = "smps7"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1160000>; - regulator-always-on; - regulator-boot-on; - }; - - smps8_reg: smps8 { - /* VDD_IVA */ - regulator-name = "smps8"; - regulator-min-microvolt = < 850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps9_reg: smps9 { - /* PMIC_3V3 */ - regulator-name = "smps9"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - - ldo1_reg: ldo1 { - /* VDD_SD / VDDSHV8 */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ldo2 { - /* VDD_1V8 */ - regulator-name = "ldo2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo3_reg: ldo3 { - /* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo4_reg: ldo4 { - /* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */ - regulator-name = "ldo4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo9_reg: ldo9 { - /* VDD_RTC */ - regulator-name = "ldo9"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - regulator-always-on; - regulator-boot-on; - }; - - ldoln_reg: ldoln { - /* VDDA_1V8_PLL */ - regulator-name = "ldoln"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldousb_reg: ldousb { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldousb"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - /* regen1 not used */ - }; - }; - - tps659038_pwr_button: tps659038_pwr_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&tps659038>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - ti,palmas-long-press-seconds = <12>; - }; - - tps659038_gpio: tps659038_gpio { - compatible = "ti,palmas-gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - }; - - rtc0: rtc@56 { - compatible = "emmicro,em3027"; - reg = <0x56>; - }; - - eeprom_module: atmel@50 { - compatible = "atmel,24c08"; - reg = <0x50>; - pagesize = <16>; - }; - - wm8731: wm8731@1a { - #sound-dai-cells = <0>; - compatible = "wlf,wm8731"; - reg = <0x1a>; - status = "okay"; - }; -}; - -&cpu0 { - cpu0-supply = <&smps12_reg>; - voltage-tolerance = <1>; -}; - -&sata { - status = "okay"; -}; - -&mailbox5 { - status = "okay"; - mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { - status = "okay"; - }; - mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { - status = "okay"; - }; -}; - -&mailbox6 { - status = "okay"; - mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { - status = "okay"; - }; - mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { - status = "okay"; - }; -}; - -&mmc2 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_default>; - - vmmc-supply = <&vdd_3v3>; - bus-width = <8>; - ti,non-removable; - cap-mmc-dual-data-rate; -}; - -&qspi { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&qspi1_pins>; - - spi-max-frequency = <48000000>; - - spi_flash: spi_flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,m25p80", "jedec,spi-nor"; - reg = <0>; /* CS0 */ - spi-max-frequency = <48000000>; - - partition@0 { - label = "uboot"; - reg = <0x0 0xc0000>; - }; - - partition@c0000 { - label = "uboot environment"; - reg = <0xc0000 0x40000>; - }; - - partition@100000 { - label = "reserved"; - reg = <0x100000 0x0>; - }; - }; - - /* touch controller */ - ads7846@0 { - pinctrl-names = "default"; - pinctrl-0 = <&ads7846_pins>; - - compatible = "ti,ads7846"; - vcc-supply = <&ads7846reg>; - - reg = <1>; /* CS1 */ - spi-max-frequency = <1500000>; - - interrupt-parent = <&gpio1>; - interrupts = <31 0>; - pendown-gpio = <&gpio1 31 0>; - - - ti,x-min = /bits/ 16 <0x0>; - ti,x-max = /bits/ 16 <0x0fff>; - ti,y-min = /bits/ 16 <0x0>; - ti,y-max = /bits/ 16 <0x0fff>; - - ti,x-plate-ohms = /bits/ 16 <180>; - ti,pressure-max = /bits/ 16 <255>; - - ti,debounce-max = /bits/ 16 <30>; - ti,debounce-tol = /bits/ 16 <10>; - ti,debounce-rep = /bits/ 16 <1>; - - wakeup-source; - }; -}; - -&mac { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_pins_default>; - pinctrl-1 = <&cpsw_pins_sleep>; - dual_emac; -}; - -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <0>; -}; - -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "rgmii-txid"; - dual_emac_res_vlan = <1>; -}; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_pins_default>; - pinctrl-1 = <&davinci_mdio_pins_sleep>; -}; - -&usb2_phy1 { - phy-supply = <&ldousb_reg>; -}; - -&usb2_phy2 { - phy-supply = <&ldousb_reg>; -}; - -&usb1 { - dr_mode = "host"; -}; - -&usb2 { - dr_mode = "host"; -}; - -&mcasp3 { - #sound-dai-cells = <0>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mcasp3_pins_default>; - pinctrl-1 = <&mcasp3_pins_sleep>; - status = "okay"; - - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializers */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 1 2 0 0 - >; -}; - -&gpio3 { - status = "okay"; - ti,no-reset-on-init; -}; - -&gpio2 { - status = "okay"; - ti,no-reset-on-init; -}; diff --git a/arch/arm/dts/am57xx-sbc-am57x.dts b/arch/arm/dts/am57xx-sbc-am57x.dts deleted file mode 100644 index 31f9be6324..0000000000 --- a/arch/arm/dts/am57xx-sbc-am57x.dts +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Support for CompuLab SBC-AM57x single board computer - * - * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/ - * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#include "am57xx-cl-som-am57x.dts" -#include "compulab-sb-som.dtsi" - -/ { - model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x"; - compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"; - - aliases { - display0 = &lcd0; - display1 = &hdmi; - }; -}; - -&dra7_pmx_core { - uart3_pins_default: uart3_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ - DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ - >; - }; - - mmc1_pins_default: mmc1_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */ - DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */ - DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */ - DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */ - DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */ - DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */ - DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1_sdcd.gpio6_27 */ - DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14) /* mmc1_sdwp.gpio6_28 */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - i2c5_pins_default: i2c5_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ - >; - }; - - lcd_pins_default: lcd_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14) /* vin2a_vsync0.gpio4_0 */ - >; - }; - - hdmi_pins: pinmux_hdmi_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ - >; - }; - - hdmi_conn_pins: pinmux_hdmi_conn_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14) /* spi1_cs2.gpio7_12 */ - >; - }; -}; - -&uart3 { - status = "okay"; - interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, - <&dra7_pmx_core 0x3f8>; - - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_default>; -}; - -&mmc1 { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; - - vmmc-supply = <&ldo1_reg>; - bus-width = <4>; - cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>; -}; - -&usb1 { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; -}; - -&i2c5 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins_default>; - clock-frequency = <400000>; - - eeprom_base: atmel@54 { - compatible = "atmel,24c08"; - reg = <0x54>; - pagesize = <16>; - }; - - pca9555: pca9555@20 { - compatible = "nxp,pca9555"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; -}; - -&dss { - status = "ok"; - - vdda_video-supply = <&ldoln_reg>; - - port { - dpi_lcd_out: endpoint { - remote-endpoint = <&lcd_in>; - data-lines = <24>; - }; - }; -}; - -&lcd0 { - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins_default>; - - enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH - &gpio4 0 GPIO_ACTIVE_HIGH>; - - port { - lcd_in: endpoint { - remote-endpoint = <&dpi_lcd_out>; - data-lines = <24>; - }; - }; -}; - -&hdmi { - status = "ok"; - vdda-supply = <&ldo4_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pins>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&hdmi_connector_in>; - lanes = <1 0 3 2 5 4 7 6>; - }; - }; -}; - -&hdmi_conn { - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_conn_pins>; - - hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&hdmi_out>; - }; - }; -}; diff --git a/arch/arm/dts/sun50i-h6-orangepi.dtsi b/arch/arm/dts/sun50i-h6-orangepi.dtsi index 0612c19cd9..62e27948a3 100644 --- a/arch/arm/dts/sun50i-h6-orangepi.dtsi +++ b/arch/arm/dts/sun50i-h6-orangepi.dtsi @@ -21,17 +21,55 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + power { + label = "orangepi:red:power"; + gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + default-state = "on"; + }; + + status { + label = "orangepi:green:status"; + gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + }; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC jack */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; bus-width = <4>; status = "okay"; }; +&ohci0 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + &r_i2c { status = "okay"; @@ -43,6 +81,14 @@ interrupt-controller; #interrupt-cells = <1>; x-powers,self-working-mode; + vina-supply = <®_vcc5v>; + vinb-supply = <®_vcc5v>; + vinc-supply = <®_vcc5v>; + vind-supply = <®_vcc5v>; + vine-supply = <®_vcc5v>; + aldoin-supply = <®_vcc5v>; + bldoin-supply = <®_vcc5v>; + cldoin-supply = <®_vcc5v>; regulators { reg_aldo1: aldo1 { @@ -148,3 +194,15 @@ pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; + +&usb2otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb2phy { + usb0_id_det-gpios = <&pio 2 6 GPIO_ACTIVE_HIGH>; /* PC6 */ + usb0_vbus-supply = <®_vcc5v>; + usb3_vbus-supply = <®_vcc5v>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts index ceffc40810..4802902e12 100644 --- a/arch/arm/dts/sun50i-h6-pine-h64.dts +++ b/arch/arm/dts/sun50i-h6-pine-h64.dts @@ -14,6 +14,7 @@ compatible = "pine64,pine-h64", "allwinner,sun50i-h6"; aliases { + ethernet0 = &emac; serial0 = &uart0; }; @@ -21,6 +22,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -39,23 +51,79 @@ gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ }; }; + + reg_usb_vbus: vbus { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <100000>; + gpio = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; -&mmc0 { +&emac { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; + pinctrl-0 = <&ext_rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_aldo2>; + allwinner,rx-delay-ps = <200>; + allwinner,tx-delay-ps = <200>; + status = "okay"; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { vmmc-supply = <®_cldo1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + bus-width = <4>; status = "okay"; }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins>; vmmc-supply = <®_cldo1>; vqmmc-supply = <®_bldo2>; non-removable; cap-mmc-hw-reset; + bus-width = <8>; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci3 { status = "okay"; }; @@ -83,6 +151,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-ac200"; + regulator-enable-ramp-delay = <100000>; }; reg_aldo3: aldo3 { @@ -183,3 +252,14 @@ pinctrl-0 = <&uart0_ph_pins>; status = "okay"; }; + +&usb2otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy { + usb0_vbus-supply = <®_usb_vbus>; + usb3_vbus-supply = <®_usb_vbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi index cfa5fffcf6..e0dc4a05c1 100644 --- a/arch/arm/dts/sun50i-h6.dtsi +++ b/arch/arm/dts/sun50i-h6.dtsi @@ -6,8 +6,11 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun50i-h6-ccu.h> #include <dt-bindings/clock/sun50i-h6-r-ccu.h> +#include <dt-bindings/clock/sun8i-de2.h> +#include <dt-bindings/clock/sun8i-tcon-top.h> #include <dt-bindings/reset/sun50i-h6-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> +#include <dt-bindings/reset/sun8i-de2.h> / { interrupt-parent = <&gic>; @@ -19,34 +22,40 @@ #size-cells = <0>; cpu0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <0>; enable-method = "psci"; }; cpu1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <1>; enable-method = "psci"; }; cpu2: cpu@2 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <2>; enable-method = "psci"; }; cpu3: cpu@3 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; device_type = "cpu"; reg = <3>; enable-method = "psci"; }; }; + de: display-engine { + compatible = "allwinner,sun50i-h6-display-engine"; + allwinner,pipelines = <&mixer0>; + status = "disabled"; + }; + iosc: internal-osc-clk { #clock-cells = <0>; compatible = "fixed-clock"; @@ -92,6 +101,99 @@ #size-cells = <1>; ranges; + display-engine@1000000 { + compatible = "allwinner,sun50i-h6-de3", + "allwinner,sun50i-a64-de2"; + reg = <0x1000000 0x400000>; + allwinner,sram = <&de2_sram 1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1000000 0x400000>; + + display_clocks: clock@0 { + compatible = "allwinner,sun50i-h6-de3-clk"; + reg = <0x0 0x10000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@100000 { + compatible = "allwinner,sun50i-h6-de3-mixer-0"; + reg = <0x100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + + mixer0_out_tcon_top_mixer0: endpoint { + remote-endpoint = <&tcon_top_mixer0_in_mixer0>; + }; + }; + }; + }; + }; + + video-codec@1c0e000 { + compatible = "allwinner,sun50i-h6-video-engine"; + reg = <0x01c0e000 0x2000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_MBUS_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + + syscon: syscon@3000000 { + compatible = "allwinner,sun50i-h6-system-control", + "allwinner,sun50i-a64-system-control"; + reg = <0x03000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@28000 { + compatible = "mmio-sram"; + reg = <0x00028000 0x1e000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00028000 0x1e000>; + + de2_sram: sram-section@0 { + compatible = "allwinner,sun50i-h6-sram-c", + "allwinner,sun50i-a64-sram-c"; + reg = <0x0000 0x1e000>; + }; + }; + + sram_c1: sram@1a00000 { + compatible = "mmio-sram"; + reg = <0x01a00000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01a00000 0x200000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun50i-h6-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x200000>; + }; + }; + }; + ccu: clock@3001000 { compatible = "allwinner,sun50i-h6-ccu"; reg = <0x03001000 0x1000>; @@ -101,15 +203,9 @@ #reset-cells = <1>; }; - gic: interrupt-controller@3021000 { - compatible = "arm,gic-400"; - reg = <0x03021000 0x1000>, - <0x03022000 0x2000>, - <0x03024000 0x2000>, - <0x03026000 0x2000>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - interrupt-controller; - #interrupt-cells = <3>; + sid: sid@3006000 { + compatible = "allwinner,sun50i-h6-sid"; + reg = <0x03006000 0x400>; }; pio: pinctrl@300b000 { @@ -126,6 +222,19 @@ interrupt-controller; #interrupt-cells = <3>; + ext_rgmii_pins: rgmii-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD7", "PD8", "PD9", "PD10", + "PD11", "PD12", "PD13", "PD19", "PD20"; + function = "emac"; + drive-strength = <40>; + }; + + hdmi_pins: hdmi-pins { + pins = "PH8", "PH9", "PH10"; + function = "hdmi"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -143,12 +252,23 @@ bias-pull-up; }; - uart0_ph_pins: uart0-ph { + uart0_ph_pins: uart0-ph-pins { pins = "PH0", "PH1"; function = "uart0"; }; }; + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + mmc0: mmc@4020000 { compatible = "allwinner,sun50i-h6-mmc", "allwinner,sun50i-a64-mmc"; @@ -158,6 +278,8 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -186,6 +308,8 @@ resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -235,6 +359,250 @@ status = "disabled"; }; + emac: ethernet@5020000 { + compatible = "allwinner,sun50i-h6-emac", + "allwinner,sun50i-a64-emac"; + syscon = <&syscon>; + reg = <0x05020000 0x10000>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + status = "disabled"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + usb2otg: usb@5100000 { + compatible = "allwinner,sun50i-h6-musb", + "allwinner,sun8i-a33-musb"; + reg = <0x05100000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usb2phy 0>; + phy-names = "usb"; + extcon = <&usb2phy 0>; + status = "disabled"; + }; + + usb2phy: phy@5100400 { + compatible = "allwinner,sun50i-h6-usb-phy"; + reg = <0x05100400 0x24>, + <0x05101800 0x4>, + <0x05311800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb3_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@5101000 { + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; + reg = <0x05101000 0x100>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_BUS_EHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>, + <&ccu RST_BUS_EHCI0>; + status = "disabled"; + }; + + ohci0: usb@5101400 { + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; + reg = <0x05101400 0x100>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_OHCI0>; + status = "disabled"; + }; + + ehci3: usb@5311000 { + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci"; + reg = <0x05311000 0x100>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_BUS_EHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_OHCI3>, + <&ccu RST_BUS_EHCI3>; + phys = <&usb2phy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci3: usb@5311400 { + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci"; + reg = <0x05311400 0x100>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_OHCI3>; + phys = <&usb2phy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + hdmi: hdmi@6000000 { + compatible = "allwinner,sun50i-h6-dw-hdmi"; + reg = <0x06000000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>, <&ccu CLK_HDMI_CEC>, + <&ccu CLK_HDCP>, <&ccu CLK_BUS_HDCP>; + clock-names = "iahb", "isfr", "tmds", "cec", "hdcp", + "hdcp-bus"; + resets = <&ccu RST_BUS_HDMI_SUB>, <&ccu RST_BUS_HDCP>; + reset-names = "ctrl", "hdcp"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon_top: endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@6010000 { + compatible = "allwinner,sun50i-h6-hdmi-phy"; + reg = <0x06010000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI>, <&ccu CLK_HDMI_SLOW>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_HDMI>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + tcon_top: tcon-top@6510000 { + compatible = "allwinner,sun50i-h6-tcon-top"; + reg = <0x06510000 0x1000>; + clocks = <&ccu CLK_BUS_TCON_TOP>, + <&ccu CLK_TCON_TV0>; + clock-names = "bus", + "tcon-tv0"; + clock-output-names = "tcon-top-tv0"; + resets = <&ccu RST_BUS_TCON_TOP>; + reset-names = "rst"; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_top_mixer0_out_tcon_tv: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv_in_tcon_top_mixer0>; + }; + }; + + tcon_top_hdmi_in: port@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + tcon_top_hdmi_in_tcon_tv: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_tv_out_tcon_top>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; + }; + }; + }; + }; + + tcon_tv: lcd-controller@6515000 { + compatible = "allwinner,sun50i-h6-tcon-tv", + "allwinner,sun8i-r40-tcon-tv"; + reg = <0x06515000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV0>, + <&tcon_top CLK_TCON_TOP_TV0>; + clock-names = "ahb", + "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV0>; + reset-names = "lcd"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv_in: port@0 { + reg = <0>; + + tcon_tv_in_tcon_top_mixer0: endpoint { + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv>; + }; + }; + + tcon_tv_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv>; + }; + }; + }; + }; + r_ccu: clock@7010000 { compatible = "allwinner,sun50i-h6-r-ccu"; reg = <0x07010000 0x400>; @@ -266,7 +634,7 @@ interrupt-controller; #interrupt-cells = <3>; - r_i2c_pins: r-i2c { + r_i2c_pins: r-i2c-pins { pins = "PL0", "PL1"; function = "s_i2c"; }; diff --git a/arch/arm/dts/sun7i-a20-ainol-aw1.dts b/arch/arm/dts/sun7i-a20-ainol-aw1.dts index 57fe0066cb..5914c919d4 100644 --- a/arch/arm/dts/sun7i-a20-ainol-aw1.dts +++ b/arch/arm/dts/sun7i-a20-ainol-aw1.dts @@ -23,6 +23,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts index 763cb03033..e2bfe00588 100644 --- a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts @@ -73,8 +73,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bpi_m1p>; green { label = "bananapi-m1-plus:green:usr"; @@ -90,15 +88,11 @@ mmc3_pwrseq: mmc3_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>; reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ }; reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bpi_m1p>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -134,7 +128,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -156,8 +150,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -175,13 +167,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -191,8 +181,6 @@ &mmc3 { #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -209,11 +197,6 @@ }; }; -&mmc3_pins_a { - /* AP6210 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -226,29 +209,6 @@ status = "okay"; }; -&pio { - gmac_power_pin_bpi_m1p: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_bpi_m1p: led_pins@0 { - pins = "PH24", "PH25"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; -}; - ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -280,7 +240,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-bananapi.dts b/arch/arm/dts/sun7i-a20-bananapi.dts index 70dfc4ac0b..81bc85d398 100644 --- a/arch/arm/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/dts/sun7i-a20-bananapi.dts @@ -76,8 +76,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bananapi>; green { label = "bananapi:green:usr"; @@ -87,8 +85,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bananapi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -134,7 +130,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -156,8 +152,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -168,20 +162,16 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -201,6 +191,11 @@ }; &pio { + vcc-pa-supply = <®_vcc3v3>; + vcc-pc-supply = <®_vcc3v3>; + vcc-pe-supply = <®_vcc3v3>; + vcc-pf-supply = <®_vcc3v3>; + vcc-pg-supply = <®_vcc3v3>; gpio-line-names = /* PA */ "ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3", @@ -252,27 +247,11 @@ "IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "", "", "", "", "", "", "", "", ""; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - gmac_power_pin_bananapi: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_bananapi: led_pins@0 { - pins = "PH24"; - function = "gpio_out"; - }; }; #include "axp209.dtsi" @@ -316,27 +295,27 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; + pinctrl-0 = <&uart3_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-bananapro.dts b/arch/arm/dts/sun7i-a20-bananapro.dts index 0898eb6162..0176e9de01 100644 --- a/arch/arm/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/dts/sun7i-a20-bananapro.dts @@ -62,8 +62,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bananapro>; blue { label = "bananapro:blue:usr"; @@ -78,15 +76,11 @@ wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_bananapro>; reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; }; reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bananapro>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -114,7 +108,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -126,8 +120,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -142,20 +134,16 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -163,8 +151,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; @@ -188,74 +174,39 @@ status = "okay"; }; -&pio { - gmac_power_pin_bananapro: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_bananapro: led_pins@0 { - pins = "PH24", "PG2"; - function = "gpio_out"; - }; - - mmc0_cd_pin_bananapro: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - pins = "PH0"; - function = "gpio_out"; - }; - - usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - pins = "PH1"; - function = "gpio_out"; - }; - - vmmc3_pin_bananapro: vmmc3_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */ status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_bananapro>; gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ status = "okay"; }; &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_b>; + pinctrl-0 = <&uart4_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-cubieboard2.dts b/arch/arm/dts/sun7i-a20-cubieboard2.dts index 942ac9dfd4..200685b0b1 100644 --- a/arch/arm/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/dts/sun7i-a20-cubieboard2.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubieboard2>; blue { label = "cubieboard2:blue:usr"; @@ -116,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -137,8 +135,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -149,20 +145,16 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -182,12 +174,7 @@ }; &pio { - led_pins_cubieboard2: led_pins@0 { - pins = "PH20", "PH21"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -239,7 +226,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts index 5649161de1..99f531b8d2 100644 --- a/arch/arm/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/dts/sun7i-a20-cubietruck.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_cubietruck>; blue { label = "cubietruck:blue:usr"; @@ -100,9 +98,9 @@ mmc3_pwrseq: mmc3_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ + clocks = <&ccu CLK_OUT_A>; + clock-names = "ext_clock"; }; sound { @@ -151,7 +149,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -172,8 +170,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -185,25 +181,20 @@ &i2c1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -211,8 +202,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -228,11 +217,6 @@ }; }; -&mmc3_pins_a { - /* AP6210 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -246,45 +230,18 @@ }; &pio { - ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - pins = "PH12"; - function = "gpio_out"; - }; - - led_pins_cubietruck: led_pins@0 { - pins = "PH7", "PH11", "PH20", "PH21"; - function = "gpio_out"; - }; - - mmc3_pwrseq_pin_cubietruck: mmc3_pwrseq_pin@0 { - pins = "PH9"; - function = "gpio_out"; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - pins = "PH17"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH19"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH22"; - function = "gpio_in"; - }; + /* Pin outputs low power clock for WiFi and BT */ + pinctrl-0 = <&clk_out_a_pin>; + pinctrl-names = "default"; }; &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + pinctrl-0 = <&pwm0_pin>, <&pwm1_pin>; status = "okay"; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_cubietruck>; gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -325,7 +282,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_a>; gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -340,14 +296,31 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm20702a1"; + clocks = <&ccu CLK_OUT_A>; + clock-names = "lpo"; + device-wakeup-gpios = <&pio 7 24 GPIO_ACTIVE_LOW>; /* PH24 */ + host-wakeup-gpios = <&pio 7 25 GPIO_ACTIVE_LOW>; /* PH25 */ + shutdown-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ + max-speed = <1500000>; + }; }; &usb_otg { @@ -360,8 +333,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ usb0_vbus_det-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ usb0_vbus_power-supply = <&usb_power_supply>; diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts index 1f0e5ecbf0..fd0153f656 100644 --- a/arch/arm/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/dts/sun7i-a20-hummingbird.dts @@ -67,8 +67,6 @@ reg_mmc3_vdd: mmc3_vdd { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>; regulator-name = "mmc3_vdd"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -78,8 +76,6 @@ reg_gmac_vdd: gmac_vdd { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>; regulator-name = "gmac_vdd"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -103,7 +99,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_vdd>; @@ -120,8 +116,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -135,32 +129,24 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -168,8 +154,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_mmc3_vdd>; bus-width = <4>; non-removable; @@ -184,42 +168,18 @@ status = "okay"; }; -&pio { - ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - pins = "PH2"; - function = "gpio_out"; - }; - - mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - pins = "PH9"; - function = "gpio_out"; - }; - - gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - pins = "PH16"; - function = "gpio_out"; - }; -}; - &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; }; @@ -230,38 +190,38 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>, - <&spi2_cs0_pins_b>; + pinctrl-0 = <&spi2_pb_pins>, + <&spi2_cs0_pb_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>; status = "okay"; }; &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; + pinctrl-0 = <&uart4_pg_pins>; status = "okay"; }; &uart5 { pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins_a>; + pinctrl-0 = <&uart5_pi_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/dts/sun7i-a20-i12-tvbox.dts index 2e3f2f29d1..5f1c4f573d 100644 --- a/arch/arm/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/dts/sun7i-a20-i12-tvbox.dts @@ -61,8 +61,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_i12_tvbox>; red { label = "i12_tvbox:red:usr"; @@ -77,8 +75,6 @@ reg_vmmc3: vmmc3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_i12_tvbox>; regulator-name = "vmmc3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -88,8 +84,6 @@ reg_vmmc3_io: vmmc3-io { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_io_pin_i12_tvbox>; regulator-name = "vmmc3-io"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -101,8 +95,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_i12_tvbox>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -122,7 +114,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; phy-supply = <®_gmac_3v3>; @@ -134,8 +126,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -151,13 +141,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -165,8 +153,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; @@ -181,11 +167,6 @@ }; }; -&mmc3_pins_a { - /* AP6210 / AP6330 requires pull-up */ - bias-pull-up; -}; - &ohci0 { status = "okay"; }; @@ -194,28 +175,6 @@ status = "okay"; }; -&pio { - vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - pins = "PH2"; - function = "gpio_out"; - }; - - vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - pins = "PH12"; - function = "gpio_out"; - }; - - gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - pins = "PH21"; - function = "gpio_out"; - }; - - led_pins_i12_tvbox: led_pins@0 { - pins = "PH9", "PH20"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -226,7 +185,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-icnova-swac.dts b/arch/arm/dts/sun7i-a20-icnova-swac.dts index 926fa194eb..949494730a 100644 --- a/arch/arm/dts/sun7i-a20-icnova-swac.dts +++ b/arch/arm/dts/sun7i-a20-icnova-swac.dts @@ -74,7 +74,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -85,8 +85,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -97,14 +95,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 8 5 GPIO_ACTIVE_LOW>; /* PI5 */ @@ -156,7 +150,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts index 1b05ba466e..b90a7607d0 100644 --- a/arch/arm/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts @@ -96,7 +96,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -115,13 +115,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -129,7 +127,7 @@ }; &pio { - led_pins_itead_core: led_pins@0 { + led_pins_itead_core: led-pins { pins = "PH20","PH21"; function = "gpio_out"; drive-strength = <20>; @@ -142,6 +140,6 @@ &spdif { pinctrl-names = "default"; - pinctrl-0 = <&spdif_tx_pins_a>; + pinctrl-0 = <&spdif_tx_pin>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts index b1ab7c1c33..f91e1bee44 100644 --- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_lamobo_r1>; green { label = "lamobo_r1:green:usr"; @@ -85,8 +83,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_lamobo_r1>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -123,10 +119,12 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; + /delete-property/#address-cells; + /delete-property/#size-cells; fixed-link { speed = <1000>; @@ -141,8 +139,6 @@ switch: ethernet-switch@1e { compatible = "brcm,bcm53125"; reg = <30>; - #address-cells = <1>; - #size-cells = <0>; ports { #address-cells = <1>; @@ -199,8 +195,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -211,20 +205,16 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_lamobo_r1>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -240,27 +230,11 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_lamobo_r1: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - gmac_power_pin_lamobo_r1: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_lamobo_r1: led_pins@0 { - pins = "PH24"; - function = "gpio_out"; - }; }; #include "axp209.dtsi" @@ -314,27 +288,27 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>, - <&spi0_cs0_pins_a>, - <&spi0_cs1_pins_a>; + pinctrl-0 = <&spi0_pi_pins>, + <&spi0_cs0_pi_pin>, + <&spi0_cs1_pi_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; + pinctrl-0 = <&uart3_ph_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-m3.dts b/arch/arm/dts/sun7i-a20-m3.dts index e91a209850..b8a1aaaf39 100644 --- a/arch/arm/dts/sun7i-a20-m3.dts +++ b/arch/arm/dts/sun7i-a20-m3.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m3>; blue { label = "m3:blue:usr"; @@ -83,7 +81,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -94,8 +92,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -111,13 +107,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -125,8 +119,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; @@ -141,13 +133,6 @@ status = "okay"; }; -&pio { - led_pins_m3: led_pins@0 { - pins = "PH20"; - function = "gpio_out"; - }; -}; - ®_usb1_vbus { status = "okay"; }; @@ -158,7 +143,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-m5.dts b/arch/arm/dts/sun7i-a20-m5.dts index 00c3ffd323..6de52c7c31 100644 --- a/arch/arm/dts/sun7i-a20-m5.dts +++ b/arch/arm/dts/sun7i-a20-m5.dts @@ -21,6 +21,10 @@ }; }; +&ahci { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -31,7 +35,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -51,6 +55,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-mk808c.dts b/arch/arm/dts/sun7i-a20-mk808c.dts index 6109f794a9..1491c603f6 100644 --- a/arch/arm/dts/sun7i-a20-mk808c.dts +++ b/arch/arm/dts/sun7i-a20-mk808c.dts @@ -106,8 +106,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -121,20 +119,14 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -153,18 +145,6 @@ status = "okay"; }; -&pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH4"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH5"; - function = "gpio_in"; - }; -}; - ®_usb0_vbus { status = "okay"; }; @@ -179,13 +159,13 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>; status = "okay"; }; @@ -195,8 +175,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts new file mode 100644 index 0000000000..20bf09b222 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-olimex-som-evb-emmc.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree Source for A20-Olimex-SOM-EVB-eMMC Board + * + * Copyright (C) 2018 Olimex Ltd. + * Author: Stefan Mavrodiev <stefan@olimex.com> + */ + +/dts-v1/; +#include "sun7i-a20-olimex-som-evb.dts" + +/ { + + model = "Olimex A20-Olimex-SOM-EVB-eMMC"; + compatible = "olimex,a20-olimex-som-evb-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 18 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc2_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts index f080f82b58..f0e6a96e57 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som-evb.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olimex_som_evb>; green { label = "a20-olimex-som-evb:green:usr"; @@ -112,7 +110,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -133,8 +131,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -145,14 +141,10 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -160,49 +152,49 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@190 { + button-190 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <190000>; }; - button@390 { + button-390 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <390000>; }; - button@600 { + button-600 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <600000>; }; - button@800 { + button-800 { label = "Search"; linux,code = <KEY_SEARCH>; channel = <0>; voltage = <800000>; }; - button@980 { + button-980 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; voltage = <980000>; }; - button@1180 { + button-1180 { label = "Esc"; linux,code = <KEY_ESC>; channel = <0>; voltage = <1180000>; }; - button@1400 { + button-1400 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; @@ -211,8 +203,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -220,8 +210,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olimex_som_evb>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 0 GPIO_ACTIVE_LOW>; /* PH0 */ @@ -241,36 +229,14 @@ }; &pio { - ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olimex_som_evb: led_pins@0 { + led_pins_olimex_som_evb: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - - mmc3_cd_pin_olimex_som_evb: mmc3_cd_pin@0 { - pins = "PH0"; - function = "gpio_in"; - bias-pull-up; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - pins = "PH4"; - function = "gpio_in"; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - pins = "PH5"; - function = "gpio_in"; - }; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -316,33 +282,33 @@ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart6 { pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; + pinctrl-0 = <&uart6_pi_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; @@ -352,8 +318,6 @@ }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */ usb0_vbus-supply = <®_usb0_vbus>; diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts index c56620a8fb..a59755a2e7 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb-emmc.dts @@ -20,8 +20,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts index 3d7b5c848f..823aabce04 100644 --- a/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts +++ b/arch/arm/dts/sun7i-a20-olimex-som204-evb.dts @@ -78,7 +78,7 @@ &can0 { pinctrl-names = "default"; - pinctrl-0 = <&can0_pins_a>; + pinctrl-0 = <&can_ph_pins>; status = "okay"; }; @@ -104,7 +104,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy3>; phy-mode = "rgmii"; phy-supply = <®_vcc3v3>; @@ -130,8 +130,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -143,8 +141,6 @@ /* Exposed to UEXT1 */ &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -156,20 +152,16 @@ /* Exposed to UEXT2 */ &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; @@ -177,8 +169,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&rtl_pwrseq>; bus-width = <4>; @@ -203,8 +193,8 @@ }; &pio { - bt_uart_pins: bt_uart_pins@0 { - pins = "PG6", "PG7", "PG8"; + uart3_rts_pin: uart3-rts-pin { + pins = "PG8"; function = "uart3"; }; }; @@ -274,43 +264,43 @@ /* Exposed to UEXT1 */ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; /* Exposed to UEXT2 */ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; /* Used for RTL8723BS bluetooth */ &uart3 { pinctrl-names = "default"; - pinctrl-0 = <&bt_uart_pins>; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_pin>; status = "okay"; }; /* Exposed to UEXT1 */ &uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; + pinctrl-0 = <&uart4_pg_pins>; status = "okay"; }; /* Exposed to UEXT2 */ &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts index d20fd03596..5e411194bf 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime.dts @@ -105,7 +105,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -126,8 +126,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -142,8 +140,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -154,8 +150,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -175,24 +169,19 @@ }; &pio { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olinuxinolime: led_pins@0 { + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -200,7 +189,6 @@ }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -219,7 +207,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts index 81f376f2a4..decb014a38 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -48,23 +48,12 @@ compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20"; mmc2_pwrseq: pwrseq { - pinctrl-0 = <&mmc2_pins_nrst>; - pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; }; }; -&pio { - mmc2_pins_nrst: mmc2-rst-pin { - pins = "PC16"; - function = "gpio_out"; - }; -}; - &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; vqmmc-supply = <®_vcc3v3>; bus-width = <4>; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts index b828677f33..4e1c590eb0 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2.dts @@ -110,7 +110,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -131,8 +131,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -143,8 +141,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -154,9 +150,11 @@ }; }; +&lradc { + vref-supply = <®_vcc3v0>; +}; + &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -176,37 +174,26 @@ }; &pio { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - pins = "PC3"; - function = "gpio_out"; - }; - - led_pins_olinuxinolime: led_pins@0 { + led_pins_olinuxinolime: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; }; - - usb0_vbus_pin_lime2: usb0_vbus_pin@0 { - pins = "PC17"; - function = "gpio_out"; - }; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -245,6 +232,8 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-name = "vddio-csi0"; + regulator-soft-start; + regulator-ramp-delay = <1600>; }; ®_ldo4 { @@ -254,7 +243,6 @@ }; ®_usb0_vbus { - pinctrl-0 = <&usb0_vbus_pin_lime2>; gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -269,7 +257,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts index d99e7b193e..2337b44a88 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-micro-emmc.dts @@ -54,8 +54,6 @@ }; &mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; non-removable; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts index 866d230593..840ae1194a 100644 --- a/arch/arm/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/dts/sun7i-a20-olinuxino-micro.dts @@ -117,7 +117,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>, <&gmac_txerr>; + pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -138,8 +138,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -150,8 +148,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; eeprom: eeprom@50 { @@ -162,8 +158,6 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; @@ -171,49 +165,49 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@191 { + button-191 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <191274>; }; - button@392 { + button-392 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; voltage = <392644>; }; - button@601 { + button-601 { label = "Menu"; linux,code = <KEY_MENU>; channel = <0>; voltage = <601151>; }; - button@795 { + button-795 { label = "Search"; linux,code = <KEY_SEARCH>; channel = <0>; voltage = <795090>; }; - button@987 { + button-987 { label = "Home"; linux,code = <KEY_HOMEPAGE>; channel = <0>; voltage = <987387>; }; - button@1184 { + button-1184 { label = "Esc"; linux,code = <KEY_ESC>; channel = <0>; voltage = <1184678>; }; - button@1398 { + button-1398 { label = "Enter"; linux,code = <KEY_ENTER>; channel = <0>; @@ -222,8 +216,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -231,8 +223,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ @@ -252,30 +242,24 @@ }; &pio { - gmac_txerr: gmac_txerr@0 { + gmac_txerr: gmac-txerr-pin { pins = "PA17"; function = "gmac"; }; - mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - pins = "PH11"; - function = "gpio_in"; - bias-pull-up; - }; - - led_pins_olinuxino: led_pins@0 { + led_pins_olinuxino: led-pins { pins = "PH2"; function = "gpio_out"; drive-strength = <20>; }; - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + usb0_vbus_detect_pin: usb0-vbus-detect-pin { pins = "PH5"; function = "gpio_in"; bias-pull-down; @@ -331,33 +315,33 @@ &spi1 { pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>, - <&spi1_cs0_pins_a>; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; status = "okay"; }; &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; &uart6 { pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; + pinctrl-0 = <&uart6_pi_pins>; status = "okay"; }; &uart7 { pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; + pinctrl-0 = <&uart7_pi_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/dts/sun7i-a20-orangepi-mini.dts index f5c7178eb0..15881081ca 100644 --- a/arch/arm/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/dts/sun7i-a20-orangepi-mini.dts @@ -74,8 +74,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_orangepi>; green { label = "orangepi:green:usr"; @@ -90,8 +88,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_orangepi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -123,7 +119,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -145,8 +141,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -160,13 +154,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -174,8 +166,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */ @@ -187,43 +177,11 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { - pins = "PH11"; - function = "gpio_in"; - bias-pull-up; - }; - - usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; - - gmac_power_pin_orangepi: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_orangepi: led_pins@0 { - pins = "PH24", "PH25"; - function = "gpio_out"; - }; - - usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - pins = "PH26"; - function = "gpio_out"; - }; }; ®_dcdc2 { @@ -256,20 +214,18 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_bananapro>; gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-orangepi.dts b/arch/arm/dts/sun7i-a20-orangepi.dts index 7a4244e575..d64de2e73a 100644 --- a/arch/arm/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/dts/sun7i-a20-orangepi.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_orangepi>; green { label = "orangepi:green:usr"; @@ -74,8 +72,6 @@ reg_gmac_3v3: gmac-3v3 { compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_orangepi>; regulator-name = "gmac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -99,7 +95,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; @@ -111,8 +107,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -126,13 +120,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */ @@ -144,37 +136,11 @@ }; &pio { - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { - pins = "PH10"; - function = "gpio_in"; - bias-pull-up; - }; - - usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { - pins = "PH22"; - function = "gpio_out"; - }; - - gmac_power_pin_orangepi: gmac_power_pin@0 { - pins = "PH23"; - function = "gpio_out"; - }; - - led_pins_orangepi: led_pins@0 { - pins = "PH24"; - function = "gpio_out"; - }; - - usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { - pins = "PH26"; - function = "gpio_out"; - }; }; ®_dcdc2 { @@ -207,20 +173,18 @@ }; ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ status = "okay"; }; ®_usb2_vbus { - pinctrl-0 = <&usb2_vbus_pin_bananapro>; gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts index bfca960b03..538ea15fa3 100644 --- a/arch/arm/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/dts/sun7i-a20-pcduino3-nano.dts @@ -71,8 +71,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_pcduino3_nano>; /* Marked "LED3" on the PCB. */ usr1 { @@ -115,7 +113,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -136,8 +134,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -149,13 +145,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -175,30 +169,14 @@ }; &pio { - ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { - pins = "PH2"; - function = "gpio_out"; - }; - - led_pins_pcduino3_nano: led_pins@0 { - pins = "PH16", "PH15"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; }; - - usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - pins = "PD2"; - function = "gpio_out"; - }; }; ®_ahci_5v { - pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>; gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; }; @@ -232,14 +210,13 @@ /* A single regulator (U24) powers both USB host ports. */ ®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ status = "okay"; }; &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts index c576f101fb..a72ed4318d 100644 --- a/arch/arm/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/dts/sun7i-a20-pcduino3.dts @@ -63,8 +63,6 @@ leds { compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_pcduino3>; tx { label = "pcduino3:green:tx"; @@ -77,23 +75,22 @@ }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&key_pins_pcduino3>; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + + back { label = "Key Back"; linux,code = <KEY_BACK>; gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; }; - button@1 { + + home { label = "Key Home"; linux,code = <KEY_HOME>; gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; }; - button@2 { + + menu { label = "Key Menu"; linux,code = <KEY_MENU>; gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; @@ -124,7 +121,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; + pinctrl-0 = <&gmac_mii_pins>; phy = <&phy1>; phy-mode = "mii"; status = "okay"; @@ -135,8 +132,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -150,13 +145,11 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_rx_pins_a>; + pinctrl-0 = <&ir0_rx_pin>; status = "okay"; }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -176,17 +169,7 @@ }; &pio { - led_pins_pcduino3: led_pins@0 { - pins = "PH15", "PH16"; - function = "gpio_out"; - }; - - key_pins_pcduino3: key_pins@0 { - pins = "PH17", "PH18", "PH19"; - function = "gpio_in"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -233,7 +216,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-primo73.dts b/arch/arm/dts/sun7i-a20-primo73.dts index b7294e0348..ac0175f795 100644 --- a/arch/arm/dts/sun7i-a20-primo73.dts +++ b/arch/arm/dts/sun7i-a20-primo73.dts @@ -67,8 +67,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -82,7 +80,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts index 8202c87ca6..ffade253d1 100644 --- a/arch/arm/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/dts/sun7i-a20-wexler-tab7200.dts @@ -63,8 +63,6 @@ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_enable_pin>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ }; @@ -74,8 +72,6 @@ }; &codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; @@ -93,8 +89,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -107,14 +101,10 @@ #include "axp209.dtsi" &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; gt911: touchscreen@5d { @@ -122,8 +112,6 @@ reg = <0x5d>; interrupt-parent = <&pio>; interrupts = <7 21 IRQ_TYPE_EDGE_FALLING>; /* EINT21 (PH21) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_reset_pin>; irq-gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* INT (PH21) */ reset-gpios = <&pio 1 13 GPIO_ACTIVE_HIGH>; /* RST (PB13) */ touchscreen-swapped-x-y; @@ -134,14 +122,14 @@ vref-supply = <®_vcc3v0>; status = "okay"; - button@571 { + button-571 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <571428>; }; - button@761 { + button-761 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; @@ -150,8 +138,6 @@ }; &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -171,22 +157,7 @@ }; &pio { - bl_enable_pin: bl_enable_pin@0 { - pins = "PH7"; - function = "gpio_out"; - }; - - codec_pa_pin: codec_pa_pin@0 { - pins = "PH15"; - function = "gpio_out"; - }; - - ts_reset_pin: ts_reset_pin@0 { - pins = "PB13"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -195,7 +166,7 @@ &pwm { pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; + pinctrl-0 = <&pwm0_pin>; status = "okay"; }; @@ -238,7 +209,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi new file mode 100644 index 0000000000..8a1c4681d4 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt-u-boot.dtsi @@ -0,0 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com> + */ + +#include "sunxi-u-boot.dtsi" + +&ahci { + status = "okay"; +}; diff --git a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts index ff5c108658..c27e56091f 100644 --- a/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts +++ b/arch/arm/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -62,8 +62,6 @@ mmc3_pwrseq: mmc3_pwrseq { compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; }; @@ -82,7 +80,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_rgmii_pins>; phy = <&phy1>; phy-mode = "rgmii"; status = "okay"; @@ -93,8 +91,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -105,22 +101,16 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; status = "okay"; }; #include "axp209.dtsi" &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ @@ -128,8 +118,6 @@ }; &mmc3 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; vmmc-supply = <®_vcc3v3>; mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; @@ -158,12 +146,7 @@ }; &pio { - vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { - pins = "PH9"; - function = "gpio_out"; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { + usb0_id_detect_pin: usb0-id-detect-pin { pins = "PH4"; function = "gpio_in"; bias-pull-up; @@ -209,7 +192,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts b/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts index f1fb97d3fb..11142ae6e7 100644 --- a/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts +++ b/arch/arm/dts/sun7i-a20-yones-toptech-bd1078.dts @@ -23,6 +23,6 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi index e529e4ff21..641a8fa6d4 100644 --- a/arch/arm/dts/sun7i-a20.dtsi +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -42,8 +42,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/dma/sun4i-a10.h> @@ -52,6 +50,8 @@ / { interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; aliases { ethernet0 = &gmac; @@ -62,7 +62,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + framebuffer-lcd0-hdmi { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -73,7 +73,7 @@ status = "disabled"; }; - framebuffer@1 { + framebuffer-lcd0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; @@ -83,7 +83,7 @@ status = "disabled"; }; - framebuffer@2 { + framebuffer-lcd0-tve0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; @@ -118,10 +118,23 @@ #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <1>; + clocks = <&ccu CLK_CPU>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 1000000 + >; + #cooling-cells = <2>; }; }; @@ -135,7 +148,8 @@ cooling-maps { map0 { trip = <&cpu_alert0>; - cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; @@ -157,8 +171,19 @@ }; }; - memory { - reg = <0x40000000 0x80000000>; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + default-pool { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; }; timer { @@ -170,7 +195,7 @@ }; pmu { - compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu"; + compatible = "arm,cortex-a7-pmu"; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; }; @@ -180,14 +205,14 @@ #size-cells = <1>; ranges; - osc24M: clk@1c20050 { + osc24M: clk-24M { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; clock-output-names = "osc24M"; }; - osc32k: clk@0 { + osc32k: clk-32k { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; @@ -203,14 +228,14 @@ * The actual TX clock rate is not controlled by the * gmac_tx clock. */ - mii_phy_tx_clk: clk@1 { + mii_phy_tx_clk: clk-mii-phy-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; clock-output-names = "mii_phy_tx"; }; - gmac_int_tx_clk: clk@2 { + gmac_int_tx_clk: clk-gmac-int-tx { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -233,14 +258,15 @@ status = "disabled"; }; - soc@1c00000 { + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - sram-controller@1c00000 { - compatible = "allwinner,sun4i-a10-sram-controller"; + system-control@1c00000 { + compatible = "allwinner,sun7i-a20-system-control", + "allwinner,sun4i-a10-system-control"; reg = <0x01c00000 0x30>; #address-cells = <1>; #size-cells = <1>; @@ -254,7 +280,8 @@ ranges = <0 0x00000000 0xc000>; emac_sram: sram-section@8000 { - compatible = "allwinner,sun4i-a10-sram-a3-a4"; + compatible = "allwinner,sun7i-a20-sram-a3-a4", + "allwinner,sun4i-a10-sram-a3-a4"; reg = <0x8000 0x4000>; status = "disabled"; }; @@ -268,11 +295,26 @@ ranges = <0 0x00010000 0x1000>; otg_sram: sram-section@0 { - compatible = "allwinner,sun4i-a10-sram-d"; + compatible = "allwinner,sun7i-a20-sram-d", + "allwinner,sun4i-a10-sram-d"; reg = <0x0000 0x1000>; status = "disabled"; }; }; + + sram_c: sram@1d00000 { + compatible = "mmio-sram"; + reg = <0x01d00000 0xd0000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x01d00000 0xd0000>; + + ve_sram: sram-section@0 { + compatible = "allwinner,sun7i-a20-sram-c1", + "allwinner,sun4i-a10-sram-c1"; + reg = <0x000000 0x80000>; + }; + }; }; nmi_intc: interrupt-controller@1c00030 { @@ -449,6 +491,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun7i-a20-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -461,6 +514,8 @@ "output", "sample"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -495,6 +550,8 @@ "output", "sample"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -512,6 +569,8 @@ "output", "sample"; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -609,8 +668,6 @@ }; hdmi_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; reg = <1>; }; }; @@ -694,22 +751,22 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - can0_pins_a: can0@0 { + can_ph_pins: can-ph-pins { pins = "PH20", "PH21"; function = "can"; }; - clk_out_a_pins_a: clk_out_a@0 { + clk_out_a_pin: clk-out-a-pin { pins = "PI12"; function = "clk_out_a"; }; - clk_out_b_pins_a: clk_out_b@0 { + clk_out_b_pin: clk-out-b-pin { pins = "PI13"; function = "clk_out_b"; }; - emac_pins_a: emac0@0 { + emac_pa_pins: emac-pa-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -718,7 +775,7 @@ function = "emac"; }; - gmac_pins_mii_a: gmac_mii@0 { + gmac_mii_pins: gmac-mii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", @@ -727,7 +784,7 @@ function = "gmac"; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA10", @@ -741,47 +798,47 @@ drive-strength = <40>; }; - i2c0_pins_a: i2c0@0 { + i2c0_pins: i2c0-pins { pins = "PB0", "PB1"; function = "i2c0"; }; - i2c1_pins_a: i2c1@0 { + i2c1_pins: i2c1-pins { pins = "PB18", "PB19"; function = "i2c1"; }; - i2c2_pins_a: i2c2@0 { + i2c2_pins: i2c2-pins { pins = "PB20", "PB21"; function = "i2c2"; }; - i2c3_pins_a: i2c3@0 { + i2c3_pins: i2c3-pins { pins = "PI0", "PI1"; function = "i2c3"; }; - ir0_rx_pins_a: ir0@0 { + ir0_rx_pin: ir0-rx-pin { pins = "PB4"; function = "ir0"; }; - ir0_tx_pins_a: ir0@1 { + ir0_tx_pin: ir0-tx-pin { pins = "PB3"; function = "ir0"; }; - ir1_rx_pins_a: ir1@0 { + ir1_rx_pin: ir1-rx-pin { pins = "PB23"; function = "ir1"; }; - ir1_tx_pins_a: ir1@1 { + ir1_tx_pin: ir1-tx-pin { pins = "PB22"; function = "ir1"; }; - mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; @@ -789,7 +846,7 @@ bias-pull-up; }; - mmc2_pins_a: mmc2@0 { + mmc2_pins: mmc2-pins { pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11"; function = "mmc2"; @@ -797,7 +854,7 @@ bias-pull-up; }; - mmc3_pins_a: mmc3@0 { + mmc3_pins: mmc3-pins { pins = "PI4", "PI5", "PI6", "PI7", "PI8", "PI9"; function = "mmc3"; @@ -805,118 +862,128 @@ bias-pull-up; }; - ps20_pins_a: ps20@0 { + ps2_0_pins: ps2-0-pins { pins = "PI20", "PI21"; function = "ps2"; }; - ps21_pins_a: ps21@0 { + ps2_1_ph_pins: ps2-1-ph-pins { pins = "PH12", "PH13"; function = "ps2"; }; - pwm0_pins_a: pwm0@0 { + pwm0_pin: pwm0-pin { pins = "PB2"; function = "pwm"; }; - pwm1_pins_a: pwm1@0 { + pwm1_pin: pwm1-pin { pins = "PI3"; function = "pwm"; }; - spdif_tx_pins_a: spdif@0 { + spdif_tx_pin: spdif-tx-pin { pins = "PB13"; function = "spdif"; bias-pull-up; }; - spi0_pins_a: spi0@0 { + spi0_pi_pins: spi0-pi-pins { pins = "PI11", "PI12", "PI13"; function = "spi0"; }; - spi0_cs0_pins_a: spi0_cs0@0 { + spi0_cs0_pi_pin: spi0-cs0-pi-pin { pins = "PI10"; function = "spi0"; }; - spi0_cs1_pins_a: spi0_cs1@0 { + spi0_cs1_pi_pin: spi0-cs1-pi-pin { pins = "PI14"; function = "spi0"; }; - spi1_pins_a: spi1@0 { + spi1_pi_pins: spi1-pi-pins { pins = "PI17", "PI18", "PI19"; function = "spi1"; }; - spi1_cs0_pins_a: spi1_cs0@0 { + spi1_cs0_pi_pin: spi1-cs0-pi-pin { pins = "PI16"; function = "spi1"; }; - spi2_pins_a: spi2@0 { - pins = "PC20", "PC21", "PC22"; + spi2_pb_pins: spi2-pb-pins { + pins = "PB15", "PB16", "PB17"; function = "spi2"; }; - spi2_pins_b: spi2@1 { - pins = "PB15", "PB16", "PB17"; + spi2_cs0_pb_pin: spi2-cs0-pb-pin { + pins = "PB14"; function = "spi2"; }; - spi2_cs0_pins_a: spi2_cs0@0 { - pins = "PC19"; + spi2_pc_pins: spi2-pc-pins { + pins = "PC20", "PC21", "PC22"; function = "spi2"; }; - spi2_cs0_pins_b: spi2_cs0@1 { - pins = "PB14"; + spi2_cs0_pc_pin: spi2-cs0-pc-pin { + pins = "PC19"; function = "spi2"; }; - uart0_pins_a: uart0@0 { + uart0_pb_pins: uart0-pb-pins { pins = "PB22", "PB23"; function = "uart0"; }; - uart2_pins_a: uart2@0 { - pins = "PI16", "PI17", "PI18", "PI19"; + uart2_pi_pins: uart2-pi-pins { + pins = "PI18", "PI19"; function = "uart2"; }; - uart3_pins_a: uart3@0 { - pins = "PG6", "PG7", "PG8", "PG9"; + uart2_cts_rts_pi_pins: uart2-cts-rts-pi-pins { + pins = "PI16", "PI17"; + function = "uart2"; + }; + + uart3_pg_pins: uart3-pg-pins { + pins = "PG6", "PG7"; + function = "uart3"; + }; + + uart3_cts_rts_pg_pins: uart3-cts-rts-pg-pins { + pins = "PG8", "PG9"; function = "uart3"; }; - uart3_pins_b: uart3@1 { + uart3_ph_pins: uart3-ph-pins { pins = "PH0", "PH1"; function = "uart3"; }; - uart4_pins_a: uart4@0 { + uart4_pg_pins: uart4-pg-pins { pins = "PG10", "PG11"; function = "uart4"; }; - uart4_pins_b: uart4@1 { + uart4_ph_pins: uart4-ph-pins { pins = "PH4", "PH5"; function = "uart4"; }; - uart5_pins_a: uart5@0 { + uart5_pi_pins: uart5-pi-pins { pins = "PI10", "PI11"; function = "uart5"; }; - uart6_pins_a: uart6@0 { + uart6_pi_pins: uart6-pi-pins { pins = "PI12", "PI13"; function = "uart6"; }; - uart7_pins_a: uart7@0 { + uart7_pi_pins: uart7-pi-pins { pins = "PI20", "PI21"; function = "uart7"; }; @@ -1157,6 +1224,8 @@ reg = <0x01c2ac00 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1168,6 +1237,8 @@ reg = <0x01c2b000 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1179,6 +1250,8 @@ reg = <0x01c2b400 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -1190,6 +1263,8 @@ reg = <0x01c2b800 0x400>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_APB1_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts index 25fb048c7d..c488aaacbd 100644 --- a/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -59,6 +59,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -91,9 +102,21 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; }; }; +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -118,6 +141,16 @@ }; }; +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -134,8 +167,7 @@ &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ - cd-inverted; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ status = "okay"; }; @@ -166,6 +198,11 @@ status = "okay"; }; +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; +}; + ®_aldo2 { regulator-always-on; regulator-min-microvolt = <2500000>; @@ -220,18 +257,68 @@ regulator-name = "vcc-wifi-io"; }; +/* + * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same + * time, with the two being in sync, to be able to meet maximum power + * consumption during transmits. Since this is not really supported + * right now, just use the two as always on, and we will fix it later. + */ + ®_dldo2 { + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; +}; + +®_dldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + +&tcon_tv0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ccu CLK_OUTA>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + /* TODO host wake line connected to PMIC GPIO pins */ + shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + max-speed = <1500000>; + }; +}; + &usbphy { usb1_vbus-supply = <®_vcc5v0>; usb2_vbus-supply = <®_vcc5v0>; diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi index bd97ca3dc2..06b685869f 100644 --- a/arch/arm/dts/sun8i-r40.dtsi +++ b/arch/arm/dts/sun8i-r40.dtsi @@ -42,8 +42,10 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/sun8i-de2.h> #include <dt-bindings/clock/sun8i-r40-ccu.h> #include <dt-bindings/reset/sun8i-r40-ccu.h> +#include <dt-bindings/reset/sun8i-de2.h> / { #address-cells = <1>; @@ -59,6 +61,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -66,7 +69,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <20000>; + clock-output-names = "ext-osc32k"; }; }; @@ -99,12 +103,75 @@ }; }; + de: display-engine { + compatible = "allwinner,sun8i-r40-display-engine"; + allwinner,pipelines = <&mixer0>, <&mixer1>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; + display_clocks: clock@1000000 { + compatible = "allwinner,sun8i-r40-de2-clk", + "allwinner,sun8i-h3-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-r40-de2-mixer-0"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER0>, + <&display_clocks CLK_MIXER0>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_MIXER0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + mixer0_out_tcon_top: endpoint { + remote-endpoint = <&tcon_top_mixer0_in_mixer0>; + }; + }; + }; + }; + + mixer1: mixer@1200000 { + compatible = "allwinner,sun8i-r40-de2-mixer-1"; + reg = <0x01200000 0x100000>; + clocks = <&display_clocks CLK_BUS_MIXER1>, + <&display_clocks CLK_MIXER1>; + clock-names = "bus", + "mod"; + resets = <&display_clocks RST_WB>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer1_out: port@1 { + reg = <1>; + mixer1_out_tcon_top: endpoint { + remote-endpoint = <&tcon_top_mixer1_in_mixer1>; + }; + }; + }; + }; + nmi_intc: interrupt-controller@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -248,23 +315,38 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-r40-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; + rtc: rtc@1c20400 { + compatible = "allwinner,sun8i-r40-rtc", + "allwinner,sun8i-h3-rtc"; + reg = <0x01c20400 0x400>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clock-output-names = "osc32k", "osc32k-out"; + clocks = <&osc32k>; + #clock-cells = <1>; + }; + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-r40-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; + clk_out_a_pin: clk-out-a-pin { + pins = "PI12"; + function = "clk_out_a"; + }; + gmac_rgmii_pins: gmac-rgmii-pins { pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", @@ -312,6 +394,16 @@ pins = "PB22", "PB23"; function = "uart0"; }; + + uart3_pg_pins: uart3-pg-pins { + pins = "PG6", "PG7"; + function = "uart3"; + }; + + uart3_rts_cts_pg_pins: uart3-rts-cts-pg-pins { + pins = "PG8", "PG9"; + function = "uart3"; + }; }; wdt: watchdog@1c20c90 { @@ -464,6 +556,19 @@ #size-cells = <0>; }; + ahci: sata@1c18000 { + compatible = "allwinner,sun8i-r40-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; + resets = <&ccu RST_BUS_SATA>; + resets-name = "ahci"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + }; + gmac: ethernet@1c50000 { compatible = "allwinner,sun8i-r40-gmac"; syscon = <&ccu>; @@ -474,8 +579,6 @@ reset-names = "stmmaceth"; clocks = <&ccu CLK_BUS_GMAC>; clock-names = "stmmaceth"; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; gmac_mdio: mdio { @@ -485,6 +588,213 @@ }; }; + tcon_top: tcon-top@1c70000 { + compatible = "allwinner,sun8i-r40-tcon-top"; + reg = <0x01c70000 0x1000>; + clocks = <&ccu CLK_BUS_TCON_TOP>, + <&ccu CLK_TCON_TV0>, + <&ccu CLK_TVE0>, + <&ccu CLK_TCON_TV1>, + <&ccu CLK_TVE1>, + <&ccu CLK_DSI_DPHY>; + clock-names = "bus", + "tcon-tv0", + "tve0", + "tcon-tv1", + "tve1", + "dsi"; + clock-output-names = "tcon-top-tv0", + "tcon-top-tv1", + "tcon-top-dsi"; + resets = <&ccu RST_BUS_TCON_TOP>; + #clock-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_top_mixer0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_top_mixer0_in_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mixer0_out_tcon_top>; + }; + }; + + tcon_top_mixer0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_top_mixer0_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer0_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer0_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer0>; + }; + + tcon_top_mixer0_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer0>; + }; + }; + + tcon_top_mixer1_in: port@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tcon_top_mixer1_in_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mixer1_out_tcon_top>; + }; + }; + + tcon_top_mixer1_out: port@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tcon_top_mixer1_out_tcon_lcd0: endpoint@0 { + reg = <0>; + }; + + tcon_top_mixer1_out_tcon_lcd1: endpoint@1 { + reg = <1>; + }; + + tcon_top_mixer1_out_tcon_tv0: endpoint@2 { + reg = <2>; + remote-endpoint = <&tcon_tv0_in_tcon_top_mixer1>; + }; + + tcon_top_mixer1_out_tcon_tv1: endpoint@3 { + reg = <3>; + remote-endpoint = <&tcon_tv1_in_tcon_top_mixer1>; + }; + }; + + tcon_top_hdmi_in: port@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + tcon_top_hdmi_in_tcon_tv0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_tv0_out_tcon_top>; + }; + + tcon_top_hdmi_in_tcon_tv1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_tv1_out_tcon_top>; + }; + }; + + tcon_top_hdmi_out: port@5 { + reg = <5>; + + tcon_top_hdmi_out_hdmi: endpoint { + remote-endpoint = <&hdmi_in_tcon_top>; + }; + }; + }; + }; + + tcon_tv0: lcd-controller@1c73000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c73000 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV0>, <&tcon_top 0>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV0>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_tv0_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>; + }; + + tcon_tv0_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv0>; + }; + }; + + tcon_tv0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv0_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>; + }; + }; + }; + }; + + tcon_tv1: lcd-controller@1c74000 { + compatible = "allwinner,sun8i-r40-tcon-tv"; + reg = <0x01c74000 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON_TV1>, <&tcon_top 1>; + clock-names = "ahb", "tcon-ch1"; + resets = <&ccu RST_BUS_TCON_TV1>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon_tv1_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon_tv1_in_tcon_top_mixer0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon_top_mixer0_out_tcon_tv1>; + }; + + tcon_tv1_in_tcon_top_mixer1: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_mixer1_out_tcon_tv1>; + }; + }; + + tcon_tv1_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tcon_tv1_out_tcon_top: endpoint@1 { + reg = <1>; + remote-endpoint = <&tcon_top_hdmi_in_tcon_tv1>; + }; + }; + }; + }; + gic: interrupt-controller@1c81000 { compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, @@ -495,6 +805,50 @@ #interrupt-cells = <3>; interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + + hdmi: hdmi@1ee0000 { + compatible = "allwinner,sun8i-r40-dw-hdmi", + "allwinner,sun8i-a83t-dw-hdmi"; + reg = <0x01ee0000 0x10000>; + reg-io-width = <1>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_HDMI0>, <&ccu CLK_HDMI_SLOW>, + <&ccu CLK_HDMI>; + clock-names = "iahb", "isfr", "tmds"; + resets = <&ccu RST_BUS_HDMI1>; + reset-names = "ctrl"; + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + hdmi_in: port@0 { + reg = <0>; + + hdmi_in_tcon_top: endpoint { + remote-endpoint = <&tcon_top_hdmi_out_hdmi>; + }; + }; + + hdmi_out: port@1 { + reg = <1>; + }; + }; + }; + + hdmi_phy: hdmi-phy@1ef0000 { + compatible = "allwinner,sun8i-r40-hdmi-phy"; + reg = <0x01ef0000 0x10000>; + clocks = <&ccu CLK_BUS_HDMI1>, <&ccu CLK_HDMI_SLOW>, + <&ccu 7>, <&ccu 16>; + clock-names = "bus", "mod", "pll-0", "pll-1"; + resets = <&ccu RST_BUS_HDMI0>; + reset-names = "phy"; + #phy-cells = <0>; + }; }; timer { diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts index 35859d8f32..54ad4db468 100644 --- a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts @@ -87,6 +87,12 @@ }; }; +&ahci { + phy-supply = <®_eldo3>; /* VDD12-SATA */ + ahci-supply = <®_dldo4>; /* VDD25-SATA */ + status = "okay"; +}; + &ehci1 { /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ status = "okay"; @@ -95,7 +101,7 @@ &i2c0 { status = "okay"; - axp22x: pmic@68 { + axp22x: pmic@34 { compatible = "x-powers,axp221"; reg = <0x34>; interrupt-parent = <&nmi_intc>; @@ -152,6 +158,18 @@ regulator-name = "vcc-wifi"; }; +®_dldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; diff --git a/arch/arm/dts/sunxi-itead-core-common.dtsi b/arch/arm/dts/sunxi-itead-core-common.dtsi index 2565d5137a..0d002f83a2 100644 --- a/arch/arm/dts/sunxi-itead-core-common.dtsi +++ b/arch/arm/dts/sunxi-itead-core-common.dtsi @@ -65,8 +65,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; status = "okay"; axp209: pmic@34 { @@ -75,8 +73,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; status = "okay"; }; @@ -125,7 +121,7 @@ &uart0 { pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; diff --git a/arch/arm/dts/uniphier-ld11.dtsi b/arch/arm/dts/uniphier-ld11.dtsi index 31ba52b14e..a3cd475b48 100644 --- a/arch/arm/dts/uniphier-ld11.dtsi +++ b/arch/arm/dts/uniphier-ld11.dtsi @@ -33,7 +33,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -42,7 +42,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; diff --git a/arch/arm/dts/uniphier-ld20.dtsi b/arch/arm/dts/uniphier-ld20.dtsi index b9ed613ace..baf2326836 100644 --- a/arch/arm/dts/uniphier-ld20.dtsi +++ b/arch/arm/dts/uniphier-ld20.dtsi @@ -43,7 +43,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0 0x000>; clocks = <&sys_clk 32>; enable-method = "psci"; @@ -53,7 +53,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a72", "arm,armv8"; + compatible = "arm,cortex-a72"; reg = <0 0x001>; clocks = <&sys_clk 32>; enable-method = "psci"; @@ -63,7 +63,7 @@ cpu2: cpu@100 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x100>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -73,7 +73,7 @@ cpu3: cpu@101 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x101>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -206,13 +206,10 @@ cooling-maps { map0 { trip = <&cpu_alert>; - cooling-device = <&cpu0 - THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert>; - cooling-device = <&cpu2 - THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -891,6 +888,53 @@ }; }; + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + status = "disabled"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, + <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = + /* downstream I/O */ + <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + /* non-prefetchable memory */ + <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ + <0 0 0 2 &pcie_intc 1>, /* INTB */ + <0 0 0 3 &pcie_intc 2>, /* INTC */ + <0 0 0 4 &pcie_intc 3>; /* INTD */ + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; + + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-ld20-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; diff --git a/arch/arm/dts/uniphier-ld4.dtsi b/arch/arm/dts/uniphier-ld4.dtsi index b73d594b6d..c2706cef0b 100644 --- a/arch/arm/dts/uniphier-ld4.dtsi +++ b/arch/arm/dts/uniphier-ld4.dtsi @@ -235,6 +235,16 @@ }; }; + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; + sd: sdhc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; @@ -246,6 +256,8 @@ clocks = <&mio_clk 0>; reset-names = "host", "bridge"; resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; @@ -263,6 +275,8 @@ clocks = <&mio_clk 1>; reset-names = "host", "bridge", "hw"; resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + dma-names = "rx-tx"; + dmas = <&dmac 6>; bus-width = <8>; cap-mmc-highspeed; cap-mmc-hw-reset; diff --git a/arch/arm/dts/uniphier-pro4.dtsi b/arch/arm/dts/uniphier-pro4.dtsi index ef342088e1..d090fc7e2d 100644 --- a/arch/arm/dts/uniphier-pro4.dtsi +++ b/arch/arm/dts/uniphier-pro4.dtsi @@ -269,6 +269,16 @@ }; }; + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; + sd: sdhc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; @@ -280,6 +290,8 @@ clocks = <&mio_clk 0>; reset-names = "host", "bridge"; resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; @@ -297,6 +309,8 @@ clocks = <&mio_clk 1>; reset-names = "host", "bridge", "hw"; resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + dma-names = "rx-tx"; + dmas = <&dmac 5>; bus-width = <8>; cap-mmc-highspeed; cap-mmc-hw-reset; @@ -313,6 +327,8 @@ clocks = <&mio_clk 2>; reset-names = "host", "bridge"; resets = <&mio_rst 2>, <&mio_rst 5>; + dma-names = "rx-tx"; + dmas = <&dmac 6>; bus-width = <4>; cap-sd-highspeed; }; diff --git a/arch/arm/dts/uniphier-pxs2.dtsi b/arch/arm/dts/uniphier-pxs2.dtsi index fa25ffd97f..4e11e85d8d 100644 --- a/arch/arm/dts/uniphier-pxs2.dtsi +++ b/arch/arm/dts/uniphier-pxs2.dtsi @@ -141,8 +141,10 @@ cooling-maps { map { trip = <&cpu_alert>; - cooling-device = <&cpu0 - THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; diff --git a/arch/arm/dts/uniphier-pxs3-ref.dts b/arch/arm/dts/uniphier-pxs3-ref.dts index 4fb12b8a67..1965e4dfe4 100644 --- a/arch/arm/dts/uniphier-pxs3-ref.dts +++ b/arch/arm/dts/uniphier-pxs3-ref.dts @@ -109,6 +109,10 @@ status = "okay"; }; +&pcie { + status = "okay"; +}; + &nand { status = "okay"; }; diff --git a/arch/arm/dts/uniphier-pxs3.dtsi b/arch/arm/dts/uniphier-pxs3.dtsi index f629c6a862..961d4d3621 100644 --- a/arch/arm/dts/uniphier-pxs3.dtsi +++ b/arch/arm/dts/uniphier-pxs3.dtsi @@ -39,7 +39,7 @@ cpu0: cpu@0 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x000>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -48,7 +48,7 @@ cpu1: cpu@1 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x001>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -57,7 +57,7 @@ cpu2: cpu@2 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x002>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -66,7 +66,7 @@ cpu3: cpu@3 { device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0 0x003>; clocks = <&sys_clk 33>; enable-method = "psci"; @@ -765,6 +765,53 @@ }; }; + pcie: pcie@66000000 { + compatible = "socionext,uniphier-pcie", "snps,dw-pcie"; + status = "disabled"; + reg-names = "dbi", "link", "config"; + reg = <0x66000000 0x1000>, <0x66010000 0x10000>, + <0x2fff0000 0x10000>; + #address-cells = <3>; + #size-cells = <2>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + num-lanes = <1>; + num-viewport = <1>; + bus-range = <0x0 0xff>; + device_type = "pci"; + ranges = + /* downstream I/O */ + <0x81000000 0 0x00000000 0x2ffe0000 0 0x00010000>, + /* non-prefetchable memory */ + <0x82000000 0 0x20000000 0x20000000 0 0x0ffe0000>; + #interrupt-cells = <1>; + interrupt-names = "dma", "msi"; + interrupts = <0 224 4>, <0 225 4>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, /* INTA */ + <0 0 0 2 &pcie_intc 1>, /* INTB */ + <0 0 0 3 &pcie_intc 2>, /* INTC */ + <0 0 0 4 &pcie_intc 3>; /* INTD */ + phy-names = "pcie-phy"; + phys = <&pcie_phy>; + + pcie_intc: legacy-interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <0 226 4>; + }; + }; + + pcie_phy: phy@66038000 { + compatible = "socionext,uniphier-pxs3-pcie-phy"; + reg = <0x66038000 0x4000>; + #phy-cells = <0>; + clocks = <&sys_clk 24>; + resets = <&sys_rst 24>; + socionext,syscon = <&soc_glue>; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; diff --git a/arch/arm/dts/uniphier-sld8.dtsi b/arch/arm/dts/uniphier-sld8.dtsi index f7fcf6b459..efce02768b 100644 --- a/arch/arm/dts/uniphier-sld8.dtsi +++ b/arch/arm/dts/uniphier-sld8.dtsi @@ -239,6 +239,16 @@ }; }; + dmac: dma-controller@5a000000 { + compatible = "socionext,uniphier-mio-dmac"; + reg = <0x5a000000 0x1000>; + interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>, + <0 71 4>, <0 72 4>, <0 73 4>; + clocks = <&mio_clk 7>; + resets = <&mio_rst 7>; + #dma-cells = <1>; + }; + sd: sdhc@5a400000 { compatible = "socionext,uniphier-sd-v2.91"; status = "disabled"; @@ -250,6 +260,8 @@ clocks = <&mio_clk 0>; reset-names = "host", "bridge"; resets = <&mio_rst 0>, <&mio_rst 3>; + dma-names = "rx-tx"; + dmas = <&dmac 4>; bus-width = <4>; cap-sd-highspeed; sd-uhs-sdr12; @@ -267,6 +279,8 @@ clocks = <&mio_clk 1>; reset-names = "host", "bridge", "hw"; resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + dma-names = "rx-tx"; + dmas = <&dmac 6>; bus-width = <8>; cap-mmc-highspeed; cap-mmc-hw-reset; diff --git a/arch/arm/dts/zynqmp-mini-qspi.dts b/arch/arm/dts/zynqmp-mini-qspi.dts index c235a5f731..1716d5179d 100644 --- a/arch/arm/dts/zynqmp-mini-qspi.dts +++ b/arch/arm/dts/zynqmp-mini-qspi.dts @@ -63,8 +63,8 @@ &qspi { status = "okay"; - flash@0 { - compatible = "n25q512a11"; + flash0: flash@0 { + compatible = "n25q512a11", "spi-flash"; #address-cells = <1>; #size-cells = <1>; reg = <0x0>; diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig index f083a4a385..fddbac9dec 100644 --- a/arch/arm/mach-omap2/omap5/Kconfig +++ b/arch/arm/mach-omap2/omap5/Kconfig @@ -9,10 +9,6 @@ choice prompt "OMAP5 board select" optional -config TARGET_CL_SOM_AM57X - bool "CompuLab CL-SOM-AM57x" - select DRA7XX - config TARGET_CM_T54 bool "CompuLab CM-T54" @@ -160,7 +156,6 @@ endchoice endmenu endif -source "board/compulab/cl-som-am57x/Kconfig" source "board/compulab/cm_t54/Kconfig" source "board/ti/omap5_uevm/Kconfig" source "board/ti/dra7xx/Kconfig" diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 8110f23ff6..1669e62a6d 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -154,8 +154,6 @@ config MACH_SUN4I bool "sun4i (Allwinner A10)" select CPU_V7A select ARM_CORTEX_CPU_IS_UP - select DM_MMC if MMC - select DM_SCSI if SCSI select PHY_SUN4I_USB select DRAM_SUN4I select SUNXI_GEN_SUN4I @@ -165,7 +163,6 @@ config MACH_SUN5I bool "sun5i (Allwinner A13)" select CPU_V7A select ARM_CORTEX_CPU_IS_UP - select DM_MMC if MMC select DRAM_SUN4I select PHY_SUN4I_USB select SUNXI_GEN_SUN4I @@ -178,7 +175,6 @@ config MACH_SUN6I select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI - select DM_MMC if MMC select DRAM_SUN6I select PHY_SUN4I_USB select SUN6I_P2WI @@ -205,7 +201,6 @@ config MACH_SUN8I_A23 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI - select DM_MMC if MMC select DRAM_SUN8I_A23 select PHY_SUN4I_USB select SUNXI_GEN_SUN6I @@ -219,7 +214,6 @@ config MACH_SUN8I_A33 select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI - select DM_MMC if MMC select DRAM_SUN8I_A33 select PHY_SUN4I_USB select SUNXI_GEN_SUN6I @@ -230,7 +224,6 @@ config MACH_SUN8I_A33 config MACH_SUN8I_A83T bool "sun8i (Allwinner A83T)" select CPU_V7A - select DM_MMC if MMC select DRAM_SUN8I_A83T select PHY_SUN4I_USB select SUNXI_GEN_SUN6I @@ -246,7 +239,6 @@ config MACH_SUN8I_H3 select ARCH_SUPPORT_PSCI select MACH_SUNXI_H3_H5 select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT - select DM_MMC if MMC config MACH_SUN8I_R40 bool "sun8i (Allwinner R40)" @@ -265,7 +257,6 @@ config MACH_SUN8I_V3S select CPU_V7_HAS_NONSEC select CPU_V7_HAS_VIRT select ARCH_SUPPORT_PSCI - select DM_MMC if MMC select SUNXI_GEN_SUN6I select SUNXI_DRAM_DW select SUNXI_DRAM_DW_16BIT @@ -280,13 +271,11 @@ config MACH_SUN9I select SUNXI_GEN_SUN6I select SUN8I_RSB select SUPPORT_SPL - select DM_MMC if MMC config MACH_SUN50I bool "sun50i (Allwinner A64)" select ARM64 select DM_I2C - select DM_MMC if MMC select PHY_SUN4I_USB select SUN6I_PRCM select SUNXI_DE2 @@ -303,7 +292,6 @@ config MACH_SUN50I_H5 bool "sun50i (Allwinner H5)" select ARM64 select MACH_SUNXI_H3_H5 - select DM_MMC if MMC select FIT select SPL_LOAD_FIT @@ -311,7 +299,6 @@ config MACH_SUN50I_H6 bool "sun50i (Allwinner H6)" select ARM64 select SUPPORT_SPL - select DM_MMC if MMC select FIT select SPL_LOAD_FIT select DRAM_SUN50I_H6 diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c index f6f5414201..b52ac17853 100644 --- a/arch/arm/mach-zynqmp/spl.c +++ b/arch/arm/mach-zynqmp/spl.c @@ -27,6 +27,7 @@ void board_init_f(ulong dummy) /* Delay is required for clocks to be propagated */ udelay(1000000); + debug("Clearing BSS 0x%p - 0x%p\n", __bss_start, __bss_end); /* Clear the BSS */ memset(__bss_start, 0, __bss_end - __bss_start); @@ -85,7 +86,7 @@ u32 spl_boot_device(void) case SD_MODE1: case SD1_LSHFT_MODE: /* not working on silicon v1 */ /* if both controllers enabled, then these two are the second controller */ -#if defined(SPL_ZYNQMP_TWO_SDHCI) +#ifdef CONFIG_SPL_ZYNQMP_TWO_SDHCI return BOOT_DEVICE_MMC2; /* else, fall through, the one SDHCI controller that is enabled is number 1 */ #endif diff --git a/board/compulab/cl-som-am57x/Kconfig b/board/compulab/cl-som-am57x/Kconfig deleted file mode 100644 index 85fc9a1fdb..0000000000 --- a/board/compulab/cl-som-am57x/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_CL_SOM_AM57X - -config SYS_BOARD - default "cl-som-am57x" - -config SYS_VENDOR - default "compulab" - -config SYS_CONFIG_NAME - default "cl-som-am57x" - -endif diff --git a/board/compulab/cl-som-am57x/MAINTAINERS b/board/compulab/cl-som-am57x/MAINTAINERS deleted file mode 100644 index e0195f4610..0000000000 --- a/board/compulab/cl-som-am57x/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -CL-SOM-AM57x BOARD -M: Uri Mashiach <uri.mashiach@compulab.co.il> -S: Maintained -F: board/compulab/cl-som-am57x/ -F: include/configs/cl-som-am57x.h -F: configs/cl-som-am57x_defconfig diff --git a/board/compulab/cl-som-am57x/Makefile b/board/compulab/cl-som-am57x/Makefile deleted file mode 100644 index 566366bf6e..0000000000 --- a/board/compulab/cl-som-am57x/Makefile +++ /dev/null @@ -1,17 +0,0 @@ -# -# Makefile -# -# (C) Copyright 2016 CompuLab, Ltd. <www.compulab.co.il> -# -# Author: Dmitry Lifshitz <lifshitz@compulab.co.il> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -ifdef CONFIG_SPL_BUILD -obj-y += spl.o mux.o -else -obj-y += cl-som-am57x.o mux.o -endif - -obj-$(CONFIG_DRIVER_TI_CPSW) += eth.o diff --git a/board/compulab/cl-som-am57x/cl-som-am57x.c b/board/compulab/cl-som-am57x/cl-som-am57x.c deleted file mode 100644 index fcba2a0e2a..0000000000 --- a/board/compulab/cl-som-am57x/cl-som-am57x.c +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Board functions for CompuLab cl_som_am57x board - * - * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ - * - * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> - */ - -#include <common.h> -#include <palmas.h> -#include <usb.h> -#include <asm/gpio.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/sys_proto.h> -#include "../common/common.h" -#include "../common/eeprom.h" -#include <asm/omap_common.h> - -DECLARE_GLOBAL_DATA_PTR; - -const struct omap_sysinfo sysinfo = { - "Board: CL-SOM-AM57x\n" -}; - -int board_init(void) -{ - /* Disable PMIC Powerhold feature, DEV_CTRL.DEV_ON = 1 */ - palmas_i2c_write_u8(TPS65903X_CHIP_P1, 0xA0, 0x1); - - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -#ifdef CONFIG_MMC -#define SB_SOM_CD_GPIO 187 -#define SB_SOM_WP_GPIO 188 - -int board_mmc_init(bd_t *bis) -{ - int ret0, ret1; - - ret0 = omap_mmc_init(0, 0, 0, SB_SOM_CD_GPIO, SB_SOM_WP_GPIO); - if (ret0) - printf("cl-som-am57x: failed to initialize mmc0\n"); - - ret1 = omap_mmc_init(1, 0, 0, -1, -1); - if (ret1) - printf("cl-som-am57x: failed to initialize mmc1\n"); - - return ret0 && ret1; -} -#endif /* CONFIG_MMC */ - -int misc_init_r(void) -{ - cl_print_pcb_info(); - - return 0; -} - -u32 get_board_rev(void) -{ - return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS); -} - -int board_usb_init(int index, enum usb_init_type init) -{ - enable_usb_clocks(index); - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - disable_usb_clocks(index); - return 0; -} diff --git a/board/compulab/cl-som-am57x/eth.c b/board/compulab/cl-som-am57x/eth.c deleted file mode 100644 index 3c59457341..0000000000 --- a/board/compulab/cl-som-am57x/eth.c +++ /dev/null @@ -1,198 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Ethernet specific code for CompuLab CL-SOM-AM57x module - * - * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ - * - * Author: Uri Mashiach <uri.mashiach@compulab.co.il> - */ - -#include <common.h> -#include <cpsw.h> -#include <environment.h> -#include <miiphy.h> -#include <asm/gpio.h> -#include <asm/arch/sys_proto.h> -#include "../common/eeprom.h" - -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ -} - -static struct cpsw_slave_data cl_som_am57x_cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_addr = 0, - .phy_if = PHY_INTERFACE_MODE_RMII, - }, - { - .slave_reg_ofs = 0x308, - .sliver_reg_ofs = 0xdc0, - .phy_addr = 1, - .phy_if = PHY_INTERFACE_MODE_RMII, - - }, -}; - -static struct cpsw_platform_data cl_som_am57_cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 2, - .slave_data = cl_som_am57x_cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; - -/* - * cl_som_am57x_efuse_read_mac_addr() - read Ethernet port MAC address. - * The information is retrieved from the SOC's registers. - * @buff: read buffer. - * @port_num: port number. - */ -static void cl_som_am57x_efuse_read_mac_addr(uchar *buff, uint port_num) -{ - uint32_t mac_hi, mac_lo; - - if (port_num) { - mac_lo = readl((*ctrl)->control_core_mac_id_1_lo); - mac_hi = readl((*ctrl)->control_core_mac_id_1_hi); - } else { - mac_lo = readl((*ctrl)->control_core_mac_id_0_lo); - mac_hi = readl((*ctrl)->control_core_mac_id_0_hi); - } - - buff[0] = (mac_hi & 0xFF0000) >> 16; - buff[1] = (mac_hi & 0xFF00) >> 8; - buff[2] = mac_hi & 0xFF; - buff[3] = (mac_lo & 0xFF0000) >> 16; - buff[4] = (mac_lo & 0xFF00) >> 8; - buff[5] = mac_lo & 0xFF; -} - -/* - * cl_som_am57x_handle_mac_address() - set MAC address in the U-Boot - * environment. - * The address is retrieved retrieved from an EEPROM field or from the - * SOC's registers. - * @env_name: U-Boot environment name. - * @field_name: EEPROM field name. - * @port_num: SOC's port number. - */ -static int cl_som_am57x_handle_mac_address(char *env_name, uint port_num) -{ - int ret; - uint8_t enetaddr[6]; - - ret = eth_env_get_enetaddr(env_name, enetaddr); - if (ret) - return 0; - - ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS); - - if (ret || !is_valid_ethaddr(enetaddr)) - cl_som_am57x_efuse_read_mac_addr(enetaddr, port_num); - - if (!is_valid_ethaddr(enetaddr)) - return -1; - - ret = eth_env_set_enetaddr(env_name, enetaddr); - if (ret) - printf("cl-som-am57x: Failed to set Eth port %d MAC address\n", - port_num); - - return ret; -} - -#define CL_SOM_AM57X_PHY_ADDR2 0x01 -#define AR8033_PHY_DEBUG_ADDR_REG 0x1d -#define AR8033_PHY_DEBUG_DATA_REG 0x1e -#define AR8033_DEBUG_RGMII_RX_CLK_DLY_REG 0x00 -#define AR8033_DEBUG_RGMII_TX_CLK_DLY_REG 0x05 -#define AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK (1 << 15) -#define AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK (1 << 8) - -/* - * cl_som_am57x_rgmii_clk_delay() - Set RGMII clock delay. - * Enable RX delay, disable TX delay. - */ -static void cl_som_am57x_rgmii_clk_delay(void) -{ - uint16_t mii_reg_val; - const char *devname; - - devname = miiphy_get_current_dev(); - /* PHY 2 */ - miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG, - AR8033_DEBUG_RGMII_RX_CLK_DLY_REG); - miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG, - &mii_reg_val); - mii_reg_val |= AR8033_DEBUG_RGMII_RX_CLK_DLY_MASK; - miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG, - mii_reg_val); - - miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_ADDR_REG, - AR8033_DEBUG_RGMII_TX_CLK_DLY_REG); - miiphy_read(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG, - &mii_reg_val); - mii_reg_val &= ~AR8033_DEBUG_RGMII_TX_CLK_DLY_MASK; - miiphy_write(devname, CL_SOM_AM57X_PHY_ADDR2, AR8033_PHY_DEBUG_DATA_REG, - mii_reg_val); -} - -#define CL_SOM_AM57X_GPIO_PHY1_RST 92 /* GPIO3_28 */ -#define CL_SOM_AM57X_RGMII_PORT1 1 - -int board_eth_init(bd_t *bis) -{ - int ret; - uint32_t ctrl_val; - char *cpsw_phy_envval; - int cpsw_act_phy = 1; - - /* SB-SOM-AM57x primary Eth (P21) is routed to RGMII1 */ - ret = cl_som_am57x_handle_mac_address("ethaddr", - CL_SOM_AM57X_RGMII_PORT1); - - if (ret) - return -1; - - /* Select RGMII for GMII1_SEL */ - ctrl_val = readl((*ctrl)->control_core_control_io1) & (~0x33); - ctrl_val |= 0x22; - writel(ctrl_val, (*ctrl)->control_core_control_io1); - mdelay(10); - - gpio_request(CL_SOM_AM57X_GPIO_PHY1_RST, "phy1_rst"); - gpio_direction_output(CL_SOM_AM57X_GPIO_PHY1_RST, 0); - mdelay(20); - - gpio_set_value(CL_SOM_AM57X_GPIO_PHY1_RST, 1); - mdelay(20); - - cpsw_phy_envval = env_get("cpsw_phy"); - if (cpsw_phy_envval != NULL) - cpsw_act_phy = simple_strtoul(cpsw_phy_envval, NULL, 0); - - cl_som_am57_cpsw_data.active_slave = cpsw_act_phy; - - ret = cpsw_register(&cl_som_am57_cpsw_data); - if (ret < 0) - printf("Error %d registering CPSW switch\n", ret); - - /* Set RGMII clock delay */ - cl_som_am57x_rgmii_clk_delay(); - - return ret; -} diff --git a/board/compulab/cl-som-am57x/mux.c b/board/compulab/cl-som-am57x/mux.c deleted file mode 100644 index 050f2aa3ef..0000000000 --- a/board/compulab/cl-som-am57x/mux.c +++ /dev/null @@ -1,123 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Pinmux configuration for CompuLab CL-SOM-AM57x board - * - * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ - * - * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> - */ -#include <asm/arch/sys_proto.h> -#include <asm/arch/mux_dra7xx.h> - -/* Serial console */ -static const struct pad_conf_entry cl_som_am57x_padconf_console[] = { - {UART3_RXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_RXD */ - {UART3_TXD, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* UART3_TXD */ -}; - -/* PMIC I2C */ -static const struct pad_conf_entry cl_som_am57x_padconf_pmic[] = { - {MCASP1_ACLKR, (M10 | PIN_INPUT)}, /* MCASP1_ACLKR.I2C4_SDA */ - {MCASP1_FSR, (M10 | PIN_INPUT)}, /* MCASP1_FSR.I2C4_SCL */ -}; - -/* Green GPIO led */ -static const struct pad_conf_entry cl_som_am57x_padconf_green_led[] = { - {GPMC_A15, (M14 | PIN_OUTPUT_PULLDOWN)}, /* GPMC_A15.GPIO2_5 */ -}; - -/* MMC/SD Card */ -static const struct pad_conf_entry cl_som_am57x_padconf_sd_card[] = { - {MMC1_CLK, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CLK */ - {MMC1_CMD, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_CMD */ - {MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT0 */ - {MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT1 */ - {MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT2 */ - {MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* MMC1_DAT3 */ - {MMC1_SDCD, (M14 | PIN_INPUT) }, /* MMC1_SDCD */ - {MMC1_SDWP, (M14 | PIN_INPUT) }, /* MMC1_SDWP */ -}; - -/* WiFi - must be in the safe mode on boot */ -static const struct pad_conf_entry cl_som_am57x_padconf_wifi[] = { - {UART1_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_CTSN */ - {UART1_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART1_RTSN */ - {UART2_RXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RXD */ - {UART2_TXD, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_TXD */ - {UART2_CTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_CTSN */ - {UART2_RTSN, (M15 | PIN_INPUT_PULLDOWN)}, /* UART2_RTSN */ -}; - -/* QSPI */ -static const struct pad_conf_entry cl_som_am57x_padconf_qspi[] = { - {GPMC_A13, (M1 | PIN_INPUT) }, /* GPMC_A13.QSPI1_RTCLK */ - {GPMC_A18, (M1 | PIN_INPUT) }, /* GPMC_A18.QSPI1_SCLK */ - {GPMC_A16, (M1 | PIN_INPUT) }, /* GPMC_A16.QSPI1_D0 */ - {GPMC_A17, (M1 | PIN_INPUT) }, /* GPMC_A17.QSPI1_D1 */ - {GPMC_CS2, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS2.QSPI1_CS0 */ -}; - -/* GPIO Expander I2C */ -static const struct pad_conf_entry cl_som_am57x_padconf_i2c_gpio[] = { - {MCASP1_AXR0, (M10 | PIN_INPUT)}, /* MCASP1_AXR0.I2C5_SDA */ - {MCASP1_AXR1, (M10 | PIN_INPUT)}, /* MCASP1_AXR1.I2C5_SCL */ -}; - -/* eMMC internal storage */ -static const struct pad_conf_entry cl_som_am57x_padconf_emmc[] = { - {GPMC_A19, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A19.MMC2_DAT4 */ - {GPMC_A20, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A20.MMC2_DAT5 */ - {GPMC_A21, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A21.MMC2_DAT6 */ - {GPMC_A22, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A22.MMC2_DAT7 */ - {GPMC_A23, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A23.MMC2_CLK */ - {GPMC_A24, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A24.MMC2_DAT0 */ - {GPMC_A25, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A25.MMC2_DAT1 */ - {GPMC_A26, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A26.MMC2_DAT2 */ - {GPMC_A27, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_A27.MMC2_DAT3 */ - {GPMC_CS1, (M1 | PIN_INPUT_PULLUP)}, /* GPMC_CS1.MMC2_CMD */ -}; - -/* usb1_drvvbus */ -static const struct pad_conf_entry cl_som_am57x_padconf_usb[] = { - /* USB1_DRVVBUS.USB1_DRVVBUS */ - {USB1_DRVVBUS, (M0 | PIN_OUTPUT_PULLDOWN | SLEWCONTROL) }, -}; - -/* Ethernet */ -static const struct pad_conf_entry cl_som_am57x_padconf_ethernet[] = { - /* MDIO bus */ - {VIN2A_D10, (M3 | PIN_OUTPUT_PULLUP) }, /* VIN2A_D10.MDIO_MCLK */ - {VIN2A_D11, (M3 | PIN_INPUT_PULLUP) }, /* VIN2A_D11.MDIO_D */ - /* EMAC Slave 1 at addr 0x1 - Default interface */ - {VIN2A_D12, (M3 | PIN_OUTPUT) }, /* VIN2A_D12.RGMII1_TXC */ - {VIN2A_D13, (M3 | PIN_OUTPUT) }, /* VIN2A_D13.RGMII1_TXCTL */ - {VIN2A_D14, (M3 | PIN_OUTPUT) }, /* VIN2A_D14.RGMII1_TXD3 */ - {VIN2A_D15, (M3 | PIN_OUTPUT) }, /* VIN2A_D15.RGMII1_TXD2 */ - {VIN2A_D16, (M3 | PIN_OUTPUT) }, /* VIN2A_D16.RGMII1_TXD1 */ - {VIN2A_D17, (M3 | PIN_OUTPUT) }, /* VIN2A_D17.RGMII1_TXD0 */ - {VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D18.RGMII1_RXC */ - {VIN2A_D19, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D19.RGMII1_RXCTL */ - {VIN2A_D20, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D20.RGMII1_RXD3 */ - {VIN2A_D21, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D21.RGMII1_RXD2 */ - {VIN2A_D22, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D22.RGMII1_RXD1 */ - {VIN2A_D23, (M3 | PIN_INPUT_PULLDOWN) }, /* VIN2A_D23.RGMII1_RXD0 */ - /* Eth PHY1 reset GPIOs*/ - {VIN2A_CLK0, (M14 | PIN_OUTPUT_PULLDOWN)}, /* VIN2A_CLK0.GPIO3_28 */ -}; - -#define SET_MUX(mux_array) do_set_mux32((*ctrl)->control_padconf_core_base, \ - mux_array, ARRAY_SIZE(mux_array)) - -void set_muxconf_regs(void) -{ - SET_MUX(cl_som_am57x_padconf_console); - SET_MUX(cl_som_am57x_padconf_pmic); - SET_MUX(cl_som_am57x_padconf_green_led); - SET_MUX(cl_som_am57x_padconf_sd_card); - SET_MUX(cl_som_am57x_padconf_wifi); - SET_MUX(cl_som_am57x_padconf_qspi); - SET_MUX(cl_som_am57x_padconf_i2c_gpio); - SET_MUX(cl_som_am57x_padconf_emmc); - SET_MUX(cl_som_am57x_padconf_usb); - SET_MUX(cl_som_am57x_padconf_ethernet); -} diff --git a/board/compulab/cl-som-am57x/spl.c b/board/compulab/cl-som-am57x/spl.c deleted file mode 100644 index 0fb3d84a02..0000000000 --- a/board/compulab/cl-som-am57x/spl.c +++ /dev/null @@ -1,238 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * SPL data and initialization for CompuLab CL-SOM-AM57x board - * - * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ - * - * Author: Uri Mashiach <uri.mashiach@compulab.co.il> - */ - -#include <asm/emif.h> -#include <asm/omap_common.h> -#include <asm/arch/sys_proto.h> - -static const struct dmm_lisa_map_regs cl_som_am57x_lisa_regs = { - .dmm_lisa_map_3 = 0x80740300, - .is_ma_present = 0x1 -}; - -void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs) -{ - /* Disable SDRAM controller EMIF2 for single core SOC */ - *dmm_lisa_regs = &cl_som_am57x_lisa_regs; - if (omap_revision() == DRA722_ES1_0) { - ((struct dmm_lisa_map_regs *) *dmm_lisa_regs)->dmm_lisa_map_3 = - 0x80640100; - } -} - -static const struct emif_regs cl_som_am57x_emif1_ddr3_532mhz_emif_regs = { - .sdram_config_init = 0x61852332, - .sdram_config = 0x61852332, - .sdram_config2 = 0x00000000, - .ref_ctrl = 0x000040f1, - .ref_ctrl_final = 0x00001040, - .sdram_tim1 = 0xeeef36f3, - .sdram_tim2 = 0x348f7fda, - .sdram_tim3 = 0x027f88a8, - .read_idle_ctrl = 0x00050000, - .zq_config = 0x1007190b, - .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0034400b, - .emif_ddr_phy_ctlr_1 = 0x0e34400b, - .emif_ddr_ext_phy_ctrl_1 = 0x04040100, - .emif_ddr_ext_phy_ctrl_2 = 0x00740074, - .emif_ddr_ext_phy_ctrl_3 = 0x00780078, - .emif_ddr_ext_phy_ctrl_4 = 0x007c007c, - .emif_ddr_ext_phy_ctrl_5 = 0x007b007b, - .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x80000000, - .emif_rd_wr_lvl_ctl = 0x00000000, - .emif_rd_wr_exec_thresh = 0x00000305 -}; - -/* Ext phy ctrl regs 1-35 */ -static const u32 cl_som_am57x_emif1_ddr3_ext_phy_ctrl_regs[] = { - 0x10040100, - 0x00740074, - 0x00780078, - 0x007c007c, - 0x007b007b, - 0x00800080, - 0x00360036, - 0x00340034, - 0x00360036, - 0x00350035, - 0x00350035, - - 0x01ff01ff, - 0x01ff01ff, - 0x01ff01ff, - 0x01ff01ff, - 0x01ff01ff, - - 0x00430043, - 0x003e003e, - 0x004a004a, - 0x00470047, - 0x00400040, - - 0x00000000, - 0x00600020, - 0x40011080, - 0x08102040, - - 0x00400040, - 0x00400040, - 0x00400040, - 0x00400040, - 0x00400040, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0 -}; - -static const struct emif_regs cl_som_am57x_emif2_ddr3_532mhz_emif_regs = { - .sdram_config_init = 0x61852332, - .sdram_config = 0x61852332, - .sdram_config2 = 0x00000000, - .ref_ctrl = 0x000040f1, - .ref_ctrl_final = 0x00001040, - .sdram_tim1 = 0xeeef36f3, - .sdram_tim2 = 0x348f7fda, - .sdram_tim3 = 0x027f88a8, - .read_idle_ctrl = 0x00050000, - .zq_config = 0x1007190b, - .temp_alert_config = 0x00000000, - .emif_ddr_phy_ctlr_1_init = 0x0034400b, - .emif_ddr_phy_ctlr_1 = 0x0e34400b, - .emif_ddr_ext_phy_ctrl_1 = 0x04040100, - .emif_ddr_ext_phy_ctrl_2 = 0x00740074, - .emif_ddr_ext_phy_ctrl_3 = 0x00780078, - .emif_ddr_ext_phy_ctrl_4 = 0x007c007c, - .emif_ddr_ext_phy_ctrl_5 = 0x007b007b, - .emif_rd_wr_lvl_rmp_win = 0x00000000, - .emif_rd_wr_lvl_rmp_ctl = 0x80000000, - .emif_rd_wr_lvl_ctl = 0x00000000, - .emif_rd_wr_exec_thresh = 0x00000305 -}; - -static const u32 cl_som_am57x_emif2_ddr3_ext_phy_ctrl_regs[] = { - 0x10040100, - 0x00820082, - 0x008b008b, - 0x00800080, - 0x007e007e, - 0x00800080, - 0x00370037, - 0x00390039, - 0x00360036, - 0x00370037, - 0x00350035, - 0x01ff01ff, - 0x01ff01ff, - 0x01ff01ff, - 0x01ff01ff, - 0x01ff01ff, - 0x00540054, - 0x00540054, - 0x004e004e, - 0x004c004c, - 0x00400040, - - 0x00000000, - 0x00600020, - 0x40011080, - 0x08102040, - - 0x00400040, - 0x00400040, - 0x00400040, - 0x00400040, - 0x00400040, - 0x0, - 0x0, - 0x0, - 0x0, - 0x0 -}; - -static struct vcores_data cl_som_am57x_volts = { - .mpu.value[OPP_NOM] = VDD_MPU_DRA7_NOM, - .mpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_MPU_NOM, - .mpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .mpu.addr = TPS659038_REG_ADDR_SMPS12, - .mpu.pmic = &tps659038, - - .eve.value[OPP_NOM] = VDD_EVE_DRA7_NOM, - .eve.value[OPP_OD] = VDD_EVE_DRA7_OD, - .eve.value[OPP_HIGH] = VDD_EVE_DRA7_HIGH, - .eve.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_DSPEVE_NOM, - .eve.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_DSPEVE_OD, - .eve.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_DSPEVE_HIGH, - .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .eve.addr = TPS659038_REG_ADDR_SMPS45, - .eve.pmic = &tps659038, - - .gpu.value[OPP_NOM] = VDD_GPU_DRA7_NOM, - .gpu.value[OPP_OD] = VDD_GPU_DRA7_OD, - .gpu.value[OPP_HIGH] = VDD_GPU_DRA7_HIGH, - .gpu.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_GPU_NOM, - .gpu.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_GPU_OD, - .gpu.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_GPU_HIGH, - .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .gpu.addr = TPS659038_REG_ADDR_SMPS6, - .gpu.pmic = &tps659038, - - .core.value[OPP_NOM] = VDD_CORE_DRA7_NOM, - .core.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_CORE_NOM, - .core.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .core.addr = TPS659038_REG_ADDR_SMPS7, - .core.pmic = &tps659038, - - .iva.value[OPP_NOM] = VDD_IVA_DRA7_NOM, - .iva.value[OPP_OD] = VDD_IVA_DRA7_OD, - .iva.value[OPP_HIGH] = VDD_IVA_DRA7_HIGH, - .iva.efuse.reg[OPP_NOM] = STD_FUSE_OPP_VMIN_IVA_NOM, - .iva.efuse.reg[OPP_OD] = STD_FUSE_OPP_VMIN_IVA_OD, - .iva.efuse.reg[OPP_HIGH] = STD_FUSE_OPP_VMIN_IVA_HIGH, - .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, - .iva.addr = TPS659038_REG_ADDR_SMPS8, - .iva.pmic = &tps659038, -}; - -void hw_data_init(void) -{ - *prcm = &dra7xx_prcm; - *dplls_data = &dra7xx_dplls; - *omap_vcores = &cl_som_am57x_volts; - *ctrl = &dra7xx_ctrl; -} - -void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs) -{ - switch (emif_nr) { - case 1: - *regs = &cl_som_am57x_emif1_ddr3_532mhz_emif_regs; - break; - case 2: - *regs = &cl_som_am57x_emif2_ddr3_532mhz_emif_regs; - break; - } -} - -void emif_get_ext_phy_ctrl_const_regs(u32 emif_nr, const u32 **regs, u32 *size) -{ - switch (emif_nr) { - case 1: - *regs = cl_som_am57x_emif1_ddr3_ext_phy_ctrl_regs; - *size = ARRAY_SIZE(cl_som_am57x_emif1_ddr3_ext_phy_ctrl_regs); - break; - case 2: - *regs = cl_som_am57x_emif2_ddr3_ext_phy_ctrl_regs; - *size = ARRAY_SIZE(cl_som_am57x_emif2_ddr3_ext_phy_ctrl_regs); - break; - } -} diff --git a/board/sunxi/Makefile b/board/sunxi/Makefile index 4d6258d932..c4e13f8c38 100644 --- a/board/sunxi/Makefile +++ b/board/sunxi/Makefile @@ -8,9 +8,6 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de. obj-y += board.o obj-$(CONFIG_SUN7I_GMAC) += gmac.o -ifndef CONFIG_SPL_BUILD -obj-$(CONFIG_SUNXI_AHCI) += ahci.o -endif obj-$(CONFIG_MACH_SUN4I) += dram_sun4i_auto.o obj-$(CONFIG_MACH_SUN5I) += dram_sun5i_auto.o obj-$(CONFIG_MACH_SUN7I) += dram_sun5i_auto.o diff --git a/board/sunxi/gmac.c b/board/sunxi/gmac.c index 826650c89b..d8fdf7728e 100644 --- a/board/sunxi/gmac.c +++ b/board/sunxi/gmac.c @@ -12,14 +12,6 @@ void eth_init_board(void) struct sunxi_ccm_reg *const ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - /* Set up clock gating */ -#ifdef CONFIG_SUNXI_GEN_SUN6I - setbits_le32(&ccm->ahb_reset0_cfg, 0x1 << AHB_RESET_OFFSET_GMAC); - setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_GMAC); -#else - setbits_le32(&ccm->ahb_gate1, 0x1 << AHB_GATE_OFFSET_GMAC); -#endif - /* Set MII clock */ #ifdef CONFIG_RGMII setbits_le32(&ccm->gmac_clk_cfg, CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | diff --git a/board/xilinx/zynq/cmds.c b/board/xilinx/zynq/cmds.c index 8b48ea3a03..27d44b760d 100644 --- a/board/xilinx/zynq/cmds.c +++ b/board/xilinx/zynq/cmds.c @@ -414,9 +414,13 @@ static int do_zynq_rsa(cmd_tbl_t *cmdtp, int flag, int argc, u32 src_ptr; char *endp; + if (argc != cmdtp->maxargs) + return CMD_RET_FAILURE; + src_ptr = simple_strtoul(argv[2], &endp, 16); if (*argv[2] == 0 || *endp != 0) return CMD_RET_USAGE; + if (zynq_verify_image(src_ptr)) return CMD_RET_FAILURE; @@ -432,6 +436,9 @@ static int zynq_decrypt_image(cmd_tbl_t *cmdtp, int flag, int argc, u32 srcaddr, srclen, dstaddr, dstlen; int status; + if (argc < 5 && argc > cmdtp->maxargs) + return CMD_RET_USAGE; + srcaddr = simple_strtoul(argv[2], &endp, 16); if (*argv[2] == 0 || *endp != 0) return CMD_RET_USAGE; @@ -485,7 +492,7 @@ static int do_zynq(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return CMD_RET_USAGE; zynq_cmd = find_cmd_tbl(argv[1], zynq_commands, ARRAY_SIZE(zynq_commands)); - if (!zynq_cmd || argc != zynq_cmd->maxargs) + if (!zynq_cmd) return CMD_RET_USAGE; ret = zynq_cmd->cmd(zynq_cmd, flag, argc, argv); diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index db27247850..5189925beb 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -170,6 +170,10 @@ static const struct { .id = 0x62, .name = "29dr", }, + { + .id = 0x66, + .name = "39dr", + }, }; #endif @@ -482,18 +486,20 @@ static const struct { {} }; -static u32 reset_reason(void) +static int reset_reason(void) { - u32 ret; - int i; + u32 reg; + int i, ret; const char *reason = NULL; - ret = readl(&crlapb_base->reset_reason); + ret = zynqmp_mmio_read((ulong)&crlapb_base->reset_reason, ®); + if (ret) + return -EINVAL; puts("Reset reason:\t"); for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) { - if (ret & reset_reasons[i].bit) { + if (reg & reset_reasons[i].bit) { reason = reset_reasons[i].name; printf("%s ", reset_reasons[i].name); break; @@ -504,7 +510,9 @@ static u32 reset_reason(void) env_set("reset_reason", reason); - writel(~0, &crlapb_base->reset_reason); + ret = zynqmp_mmio_write(~0, ~0, (ulong)&crlapb_base->reset_reason); + if (ret) + return -EINVAL; return ret; } diff --git a/cmd/fpga.c b/cmd/fpga.c index 88a8e3f318..b1f224bc6a 100644 --- a/cmd/fpga.c +++ b/cmd/fpga.c @@ -343,9 +343,9 @@ static int do_fpga_loadmk(cmd_tbl_t *cmdtp, int flag, int argc, return CMD_RET_FAILURE; } - /* get fpga subimage data address and length */ - if (fit_image_get_data(fit_hdr, noffset, &fit_data, - &data_size)) { + /* get fpga subimage/external data address and length */ + if (fit_image_get_data_and_size(fit_hdr, noffset, + &fit_data, &data_size)) { puts("Fpga subimage data not found\n"); return CMD_RET_FAILURE; } diff --git a/configs/cl-som-am57x_defconfig b/configs/cl-som-am57x_defconfig deleted file mode 100644 index fd8353ede5..0000000000 --- a/configs/cl-som-am57x_defconfig +++ /dev/null @@ -1,64 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_OMAP54XX=y -CONFIG_TARGET_CL_SOM_AM57X=y -CONFIG_SPL=y -CONFIG_SPL_SPI_FLASH_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_NR_DRAM_BANKS=2 -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_VERSION_VARIABLE=y -# CONFIG_SPL_FS_EXT4 is not set -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_SPI_LOAD=y -CONFIG_SYS_PROMPT="U-Boot# " -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_EEPROM_LAYOUT=y -CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3" -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_SCSI_AHCI=y -CONFIG_CMD_PCA953X=y -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS_GPIO=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=37 -CONFIG_LED_STATUS_STATE=2 -CONFIG_MMC_OMAP_HS=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=48000000 -CONFIG_SPI_FLASH_ATMEL=y -CONFIG_SPI_FLASH_EON=y -CONFIG_SPI_FLASH_GIGADEVICE=y -CONFIG_SPI_FLASH_MACRONIX=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_SST=y -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_CONS_INDEX=3 -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_TI_QSPI=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_OMAP_USB_PHY=y -CONFIG_USB_HOST_ETHER=y -CONFIG_USB_ETHER_ASIX=y -CONFIG_USB_ETHER_MCS7830=y -CONFIG_USB_ETHER_SMSC95XX=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index 08dfa240c1..e0e4dbd507 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -33,6 +33,7 @@ CONFIG_GPIO_UNIPHIER=y CONFIG_MISC=y CONFIG_I2C_EEPROM=y CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=10 +CONFIG_SUPPORT_EMMC_RPMB=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_UNIPHIER=y CONFIG_MMC_SDHCI=y diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index ba521876b7..ec92104f0c 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -6,8 +6,10 @@ CONFIG_ENV_SIZE=0x80 CONFIG_SPL=y CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_ZYNQMP_NO_DDR=y +# CONFIG_PSCI_RESET is not set # CONFIG_CMD_ZYNQMP is not set CONFIG_NR_DRAM_BANKS=1 +# CONFIG_EXPERT is not set # CONFIG_IMAGE_FORMAT_LEGACY is not set # CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set diff --git a/configs/xilinx_zynqmp_zcu100_revC_defconfig b/configs/xilinx_zynqmp_zcu100_revC_defconfig index 6e0767164c..cd7d2f5376 100644 --- a/configs/xilinx_zynqmp_zcu100_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu100_revC_defconfig @@ -85,8 +85,6 @@ CONFIG_USB_ETHER=y CONFIG_USB_ETH_CDC=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y -CONFIG_WDT=y -CONFIG_WDT_CDNS=y CONFIG_SPL_GZIP=y CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/doc/driver-model/MIGRATION.txt b/doc/driver-model/MIGRATION.txt index 957529202b..df659f3dd9 100644 --- a/doc/driver-model/MIGRATION.txt +++ b/doc/driver-model/MIGRATION.txt @@ -77,7 +77,6 @@ Partially converted: drivers/spi/kirkwood_spi.c drivers/spi/mxc_spi.c drivers/spi/omap3_spi.c - drivers/spi/ti_qspi.c Status: In progress Deadline: 2019.07 diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 593e9cbc1f..4e95a68a2d 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -109,6 +109,14 @@ config SATA_SIL3114 help Enable this driver to support the SIL3114 SATA controllers. +config SUNXI_AHCI + bool "Enable Allwinner SATA driver support" + depends on AHCI + default y if ARCH_SUNXI + help + Enable this driver to support the SATA controllers found in the + Allwinner A10, A20 and R40 SoCs. + config AHCI_MVEBU bool "Marvell EBU AHCI SATA support" depends on ARCH_MVEBU diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 10bed53bb3..a69edb10f7 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_SATA_SIL3114) += sata_sil3114.o obj-$(CONFIG_SATA_SIL) += sata_sil.o obj-$(CONFIG_SANDBOX) += sata_sandbox.o obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o +obj-$(CONFIG_SUNXI_AHCI) += ahci_sunxi.o diff --git a/board/sunxi/ahci.c b/drivers/ata/ahci_sunxi.c index a79b80ca1e..77b932aa03 100644 --- a/board/sunxi/ahci.c +++ b/drivers/ata/ahci_sunxi.c @@ -70,15 +70,6 @@ static int sunxi_ahci_phy_init(u8 *reg_base) return 0; } -#ifndef CONFIG_DM_SCSI -void scsi_init(void) -{ - if (sunxi_ahci_phy_init((u8 *)SUNXI_SATA_BASE) < 0) - return; - - ahci_init((void __iomem *)SUNXI_SATA_BASE); -} -#else static int sunxi_sata_probe(struct udevice *dev) { ulong base; @@ -121,6 +112,7 @@ static int sunxi_sata_bind(struct udevice *dev) static const struct udevice_id sunxi_ahci_ids[] = { { .compatible = "allwinner,sun4i-a10-ahci" }, + { .compatible = "allwinner,sun8i-r40-ahci" }, { } }; @@ -131,4 +123,3 @@ U_BOOT_DRIVER(ahci_sunxi_drv) = { .bind = sunxi_sata_bind, .probe = sunxi_sata_probe, }; -#endif diff --git a/drivers/clk/clk_zynq.c b/drivers/clk/clk_zynq.c index 482f0937cb..b09c37db40 100644 --- a/drivers/clk/clk_zynq.c +++ b/drivers/clk/clk_zynq.c @@ -434,6 +434,8 @@ static ulong zynq_clk_get_rate(struct clk *clk) case lqspi_clk ... pcap_clk: case sdio0_clk ... spi1_clk: return zynq_clk_get_peripheral_rate(priv, id, 0); + case i2c0_aper_clk ... i2c1_aper_clk: + return zynq_clk_get_cpu_rate(priv, cpu_1x_clk); default: return -ENXIO; } diff --git a/drivers/clk/sunxi/clk_r40.c b/drivers/clk/sunxi/clk_r40.c index 30beac98bb..44abc4f536 100644 --- a/drivers/clk/sunxi/clk_r40.c +++ b/drivers/clk/sunxi/clk_r40.c @@ -62,7 +62,6 @@ static struct ccu_reset r40_resets[] = { [RST_BUS_MMC1] = RESET(0x2c0, BIT(9)), [RST_BUS_MMC2] = RESET(0x2c0, BIT(10)), [RST_BUS_MMC3] = RESET(0x2c0, BIT(11)), - [RST_BUS_GMAC] = RESET(0x2c0, BIT(17)), [RST_BUS_SPI0] = RESET(0x2c0, BIT(20)), [RST_BUS_SPI1] = RESET(0x2c0, BIT(21)), [RST_BUS_SPI2] = RESET(0x2c0, BIT(22)), @@ -75,6 +74,8 @@ static struct ccu_reset r40_resets[] = { [RST_BUS_OHCI1] = RESET(0x2c0, BIT(30)), [RST_BUS_OHCI2] = RESET(0x2c0, BIT(31)), + [RST_BUS_GMAC] = RESET(0x2c4, BIT(17)), + [RST_BUS_UART0] = RESET(0x2d8, BIT(16)), [RST_BUS_UART1] = RESET(0x2d8, BIT(17)), [RST_BUS_UART2] = RESET(0x2d8, BIT(18)), diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c index 499310d0c0..069c63ba45 100644 --- a/drivers/fpga/zynqpl.c +++ b/drivers/fpga/zynqpl.c @@ -408,6 +408,8 @@ static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize, if (bstype != BIT_PARTIAL) zynq_slcr_devcfg_enable(); + puts("INFO:post config was not run, please run manually if needed\n"); + return FPGA_SUCCESS; } @@ -421,7 +423,8 @@ static int zynq_loadfs(xilinx_desc *desc, const void *buf, size_t bsize, loff_t blocksize, actread; loff_t pos = 0; int fstype; - char *interface, *dev_part, *filename; + char *interface, *dev_part; + const char *filename; blocksize = fsinfo->blocksize; interface = fsinfo->interface; diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c index c9798445c7..98bd7a5823 100644 --- a/drivers/net/sun8i_emac.c +++ b/drivers/net/sun8i_emac.c @@ -14,12 +14,14 @@ #include <asm/arch/clock.h> #include <asm/arch/gpio.h> #include <common.h> +#include <clk.h> #include <dm.h> #include <fdt_support.h> #include <linux/err.h> #include <malloc.h> #include <miiphy.h> #include <net.h> +#include <reset.h> #include <dt-bindings/pinctrl/sun4i-a10.h> #ifdef CONFIG_DM_GPIO #include <asm-generic/gpio.h> @@ -135,6 +137,8 @@ struct emac_eth_dev { phys_addr_t sysctl_reg; struct phy_device *phydev; struct mii_dev *bus; + struct clk tx_clk; + struct reset_ctl tx_rst; #ifdef CONFIG_DM_GPIO struct gpio_desc reset_gpio; #endif @@ -285,10 +289,18 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata, int ret; u32 reg; - reg = readl(priv->sysctl_reg + 0x30); + if (priv->variant == R40_GMAC) { + /* Select RGMII for R40 */ + reg = readl(priv->sysctl_reg + 0x164); + reg |= CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | + CCM_GMAC_CTRL_GPIT_RGMII | + CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY); - if (priv->variant == R40_GMAC) + writel(reg, priv->sysctl_reg + 0x164); return 0; + } + + reg = readl(priv->sysctl_reg + 0x30); if (priv->variant == H3_EMAC) { ret = sun8i_emac_set_syscon_ephy(priv, ®); @@ -639,9 +651,24 @@ static int sun8i_eth_write_hwaddr(struct udevice *dev) return _sun8i_write_hwaddr(priv, pdata->enetaddr); } -static void sun8i_emac_board_setup(struct emac_eth_dev *priv) +static int sun8i_emac_board_setup(struct emac_eth_dev *priv) { struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + int ret; + + ret = clk_enable(&priv->tx_clk); + if (ret) { + dev_err(dev, "failed to enable TX clock\n"); + return ret; + } + + if (reset_valid(&priv->tx_rst)) { + ret = reset_deassert(&priv->tx_rst); + if (ret) { + dev_err(dev, "failed to deassert TX reset\n"); + goto err_tx_clk; + } + } if (priv->variant == H3_EMAC) { /* Only H3/H5 have clock controls for internal EPHY */ @@ -656,26 +683,11 @@ static void sun8i_emac_board_setup(struct emac_eth_dev *priv) } } - if (priv->variant == R40_GMAC) { - /* Set clock gating for emac */ - setbits_le32(&ccm->ahb_reset1_cfg, BIT(AHB_RESET_OFFSET_GMAC)); - - /* De-assert EMAC */ - setbits_le32(&ccm->ahb_gate1, BIT(AHB_GATE_OFFSET_GMAC)); + return 0; - /* Select RGMII for R40 */ - setbits_le32(&ccm->gmac_clk_cfg, - CCM_GMAC_CTRL_TX_CLK_SRC_INT_RGMII | - CCM_GMAC_CTRL_GPIT_RGMII); - setbits_le32(&ccm->gmac_clk_cfg, - CCM_GMAC_CTRL_TX_CLK_DELAY(CONFIG_GMAC_TX_DELAY)); - } else { - /* Set clock gating for emac */ - setbits_le32(&ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_GMAC)); - - /* De-assert EMAC */ - setbits_le32(&ccm->ahb_reset0_cfg, BIT(AHB_RESET_OFFSET_GMAC)); - } +err_tx_clk: + clk_disable(&priv->tx_clk); + return ret; } #if defined(CONFIG_DM_GPIO) @@ -802,10 +814,14 @@ static int sun8i_emac_eth_probe(struct udevice *dev) struct sun8i_eth_pdata *sun8i_pdata = dev_get_platdata(dev); struct eth_pdata *pdata = &sun8i_pdata->eth_pdata; struct emac_eth_dev *priv = dev_get_priv(dev); + int ret; priv->mac_reg = (void *)pdata->iobase; - sun8i_emac_board_setup(priv); + ret = sun8i_emac_board_setup(priv); + if (ret) + return ret; + sun8i_emac_set_syscon(sun8i_pdata, priv); sun8i_mdio_init(dev->name, dev); @@ -834,8 +850,8 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev) int offset = 0; #ifdef CONFIG_DM_GPIO int reset_flags = GPIOD_IS_OUT; - int ret = 0; #endif + int ret; pdata->iobase = devfdt_get_addr(dev); if (pdata->iobase == FDT_ADDR_T_NONE) { @@ -850,25 +866,35 @@ static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev) return -EINVAL; } - if (priv->variant != R40_GMAC) { - offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon"); - if (offset < 0) { - debug("%s: cannot find syscon node\n", __func__); - return -EINVAL; - } - reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL); - if (!reg) { - debug("%s: cannot find reg property in syscon node\n", - __func__); - return -EINVAL; - } - priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob, - offset, reg); - if (priv->sysctl_reg == FDT_ADDR_T_NONE) { - debug("%s: Cannot find syscon base address\n", - __func__); - return -EINVAL; - } + ret = clk_get_by_name(dev, "stmmaceth", &priv->tx_clk); + if (ret) { + dev_err(dev, "failed to get TX clock\n"); + return ret; + } + + ret = reset_get_by_name(dev, "stmmaceth", &priv->tx_rst); + if (ret && ret != -ENOENT) { + dev_err(dev, "failed to get TX reset\n"); + return ret; + } + + offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "syscon"); + if (offset < 0) { + debug("%s: cannot find syscon node\n", __func__); + return -EINVAL; + } + + reg = fdt_getprop(gd->fdt_blob, offset, "reg", NULL); + if (!reg) { + debug("%s: cannot find reg property in syscon node\n", + __func__); + return -EINVAL; + } + priv->sysctl_reg = fdt_translate_address((void *)gd->fdt_blob, + offset, reg); + if (priv->sysctl_reg == FDT_ADDR_T_NONE) { + debug("%s: Cannot find syscon base address\n", __func__); + return -EINVAL; } pdata->phy_interface = -1; diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c index 8dbd3c50c1..9a5f7fd3c7 100644 --- a/drivers/net/sunxi_emac.c +++ b/drivers/net/sunxi_emac.c @@ -6,6 +6,7 @@ */ #include <common.h> +#include <clk.h> #include <dm.h> #include <linux/err.h> #include <malloc.h> @@ -157,6 +158,7 @@ struct sunxi_sramc_regs { struct emac_eth_dev { struct emac_regs *regs; + struct clk clk; struct mii_dev *bus; struct phy_device *phydev; int link_printed; @@ -500,14 +502,12 @@ static int _sunxi_emac_eth_send(struct emac_eth_dev *priv, void *packet, return 0; } -static void sunxi_emac_board_setup(struct emac_eth_dev *priv) +static int sunxi_emac_board_setup(struct emac_eth_dev *priv) { - struct sunxi_ccm_reg *const ccm = - (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct sunxi_sramc_regs *sram = (struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE; struct emac_regs *regs = priv->regs; - int pin; + int pin, ret; /* Map SRAM to EMAC */ setbits_le32(&sram->ctrl1, 0x5 << 2); @@ -517,10 +517,16 @@ static void sunxi_emac_board_setup(struct emac_eth_dev *priv) sunxi_gpio_set_cfgpin(pin, SUNXI_GPA_EMAC); /* Set up clock gating */ - setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC); + ret = clk_enable(&priv->clk); + if (ret) { + dev_err(dev, "failed to enable emac clock\n"); + return ret; + } /* Set MII clock */ clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2); + + return 0; } static int sunxi_emac_eth_start(struct udevice *dev) @@ -557,9 +563,19 @@ static int sunxi_emac_eth_probe(struct udevice *dev) { struct eth_pdata *pdata = dev_get_platdata(dev); struct emac_eth_dev *priv = dev_get_priv(dev); + int ret; priv->regs = (struct emac_regs *)pdata->iobase; - sunxi_emac_board_setup(priv); + + ret = clk_get_by_index(dev, 0, &priv->clk); + if (ret) { + dev_err(dev, "failed to get emac clock\n"); + return ret; + } + + ret = sunxi_emac_board_setup(priv); + if (ret) + return ret; return sunxi_emac_init_phy(priv, dev); } diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 3bd0093b7a..033efb8195 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -261,45 +261,6 @@ static int phywrite(struct zynq_gem_priv *priv, u32 phy_addr, ZYNQ_GEM_PHYMNTNC_OP_W_MASK, &data); } -static int phy_detection(struct udevice *dev) -{ - int i; - u16 phyreg = 0; - struct zynq_gem_priv *priv = dev->priv; - - if (priv->phyaddr != -1) { - phyread(priv, priv->phyaddr, PHY_DETECT_REG, &phyreg); - if ((phyreg != 0xFFFF) && - ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { - /* Found a valid PHY address */ - debug("Default phy address %d is valid\n", - priv->phyaddr); - return 0; - } else { - debug("PHY address is not setup correctly %d\n", - priv->phyaddr); - priv->phyaddr = -1; - } - } - - debug("detecting phy address\n"); - if (priv->phyaddr == -1) { - /* detect the PHY address */ - for (i = 31; i >= 0; i--) { - phyread(priv, i, PHY_DETECT_REG, &phyreg); - if ((phyreg != 0xFFFF) && - ((phyreg & PHY_DETECT_MASK) == PHY_DETECT_MASK)) { - /* Found a valid PHY address */ - priv->phyaddr = i; - debug("Found valid phy address, %d\n", i); - return 0; - } - } - } - printf("PHY is not detected\n"); - return -1; -} - static int zynq_gem_setup_mac(struct udevice *dev) { u32 i, macaddrlow, macaddrhigh; @@ -345,28 +306,20 @@ static int zynq_phy_init(struct udevice *dev) /* Enable only MDIO bus */ writel(ZYNQ_GEM_NWCTRL_MDEN_MASK, ®s->nwctrl); - if ((priv->interface != PHY_INTERFACE_MODE_SGMII) && - (priv->interface != PHY_INTERFACE_MODE_GMII)) { - ret = phy_detection(dev); - if (ret) { - printf("GEM PHY init failed\n"); - return ret; - } - } - priv->phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface); if (!priv->phydev) return -ENODEV; - priv->phydev->supported &= supported | ADVERTISED_Pause | - ADVERTISED_Asym_Pause; if (priv->max_speed) { ret = phy_set_supported(priv->phydev, priv->max_speed); if (ret) return ret; } + priv->phydev->supported &= supported | ADVERTISED_Pause | + ADVERTISED_Asym_Pause; + priv->phydev->advertising = priv->phydev->supported; priv->phydev->node = priv->phy_of_node; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a700f240ad..fb794adae7 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -259,6 +259,13 @@ config TEGRA210_QSPI be used to access SPI chips on platforms embedding this NVIDIA Tegra210 IP core. +config TI_QSPI + bool "TI QSPI driver" + imply TI_EDMA3 + help + Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. + This driver support spi flash single, quad and memory reads. + config XILINX_SPI bool "Xilinx SPI driver" help @@ -346,12 +353,6 @@ config SH_QSPI Enable the Renesas Quad SPI controller driver. This driver can be used on Renesas SoCs. -config TI_QSPI - bool "TI QSPI driver" - help - Enable the TI Quad-SPI (QSPI) driver for DRA7xx and AM43xx evms. - This driver support spi flash single, quad and memory reads. - config KIRKWOOD_SPI bool "Marvell Kirkwood SPI Driver" help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 01907bef79..8be9a4baa2 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -9,6 +9,7 @@ obj-y += spi-uclass.o obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o obj-$(CONFIG_SOFT_SPI) += soft_spi.o obj-$(CONFIG_SPI_MEM) += spi-mem.o +obj-$(CONFIG_TI_QSPI) += ti_qspi.o else obj-y += spi.o obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o @@ -56,7 +57,6 @@ obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o obj-$(CONFIG_TEGRA210_QSPI) += tegra210_qspi.o -obj-$(CONFIG_TI_QSPI) += ti_qspi.o obj-$(CONFIG_XILINX_SPI) += xilinx_spi.o obj-$(CONFIG_ZYNQ_SPI) += zynq_spi.o obj-$(CONFIG_ZYNQ_QSPI) += zynq_qspi.o diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index 2dcce66de0..77fa17ee8a 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -10,6 +10,7 @@ #include <asm/arch/omap.h> #include <malloc.h> #include <spi.h> +#include <spi-mem.h> #include <dm.h> #include <asm/gpio.h> #include <asm/omap_gpio.h> @@ -40,7 +41,6 @@ DECLARE_GLOBAL_DATA_PTR; #define QSPI_INVAL (4 << 16) #define QSPI_RD_QUAD (7 << 16) /* device control */ -#define QSPI_DD(m, n) (m << (3 + n*8)) #define QSPI_CKPHA(n) (1 << (2 + n*8)) #define QSPI_CSPOL(n) (1 << (1 + n*8)) #define QSPI_CKPOL(n) (1 << (n*8)) @@ -52,22 +52,12 @@ DECLARE_GLOBAL_DATA_PTR; #define MM_SWITCH 0x01 #define MEM_CS(cs) ((cs + 1) << 8) #define MEM_CS_UNSELECT 0xfffff8ff -#define MMAP_START_ADDR_DRA 0x5c000000 -#define MMAP_START_ADDR_AM43x 0x30000000 -#define CORE_CTRL_IO 0x4a002558 - -#define QSPI_CMD_READ (0x3 << 0) -#define QSPI_CMD_READ_DUAL (0x6b << 0) -#define QSPI_CMD_READ_QUAD (0x6c << 0) -#define QSPI_CMD_READ_FAST (0x0b << 0) -#define QSPI_SETUP0_NUM_A_BYTES (0x3 << 8) -#define QSPI_SETUP0_NUM_D_BYTES_NO_BITS (0x0 << 10) -#define QSPI_SETUP0_NUM_D_BYTES_8_BITS (0x1 << 10) + #define QSPI_SETUP0_READ_NORMAL (0x0 << 12) #define QSPI_SETUP0_READ_DUAL (0x1 << 12) #define QSPI_SETUP0_READ_QUAD (0x3 << 12) -#define QSPI_CMD_WRITE (0x12 << 16) -#define QSPI_NUM_DUMMY_BITS (0x0 << 24) +#define QSPI_SETUP0_ADDR_SHIFT (8) +#define QSPI_SETUP0_DBITS_SHIFT (10) /* ti qspi register set */ struct ti_qspi_regs { @@ -98,13 +88,10 @@ struct ti_qspi_regs { /* ti qspi priv */ struct ti_qspi_priv { -#ifndef CONFIG_DM_SPI - struct spi_slave slave; -#else void *memory_map; + size_t mmap_size; uint max_hz; u32 num_cs; -#endif struct ti_qspi_regs *base; void *ctrl_mod_mmap; ulong fclk; @@ -113,8 +100,9 @@ struct ti_qspi_priv { u32 dc; }; -static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz) +static int ti_qspi_set_speed(struct udevice *bus, uint hz) { + struct ti_qspi_priv *priv = dev_get_priv(bus); uint clk_div; if (!hz) @@ -133,6 +121,8 @@ static void ti_spi_set_speed(struct ti_qspi_priv *priv, uint hz) &priv->base->clk_ctrl); /* enable SCLK and program the clk divider */ writel(QSPI_CLK_EN | clk_div, &priv->base->clk_ctrl); + + return 0; } static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv) @@ -142,38 +132,6 @@ static void ti_qspi_cs_deactivate(struct ti_qspi_priv *priv) readl(&priv->base->cmd); } -static int __ti_qspi_set_mode(struct ti_qspi_priv *priv, unsigned int mode) -{ - priv->dc = 0; - if (mode & SPI_CPHA) - priv->dc |= QSPI_CKPHA(0); - if (mode & SPI_CPOL) - priv->dc |= QSPI_CKPOL(0); - if (mode & SPI_CS_HIGH) - priv->dc |= QSPI_CSPOL(0); - - return 0; -} - -static int __ti_qspi_claim_bus(struct ti_qspi_priv *priv, int cs) -{ - writel(priv->dc, &priv->base->dc); - writel(0, &priv->base->cmd); - writel(0, &priv->base->data); - - priv->dc <<= cs * 8; - writel(priv->dc, &priv->base->dc); - - return 0; -} - -static void __ti_qspi_release_bus(struct ti_qspi_priv *priv) -{ - writel(0, &priv->base->dc); - writel(0, &priv->base->cmd); - writel(0, &priv->base->data); -} - static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable) { u32 val; @@ -186,27 +144,25 @@ static void ti_qspi_ctrl_mode_mmap(void *ctrl_mod_mmap, int cs, bool enable) writel(val, ctrl_mod_mmap); } -static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen, - const void *dout, void *din, unsigned long flags, - u32 cs) +static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) { + struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev); + struct ti_qspi_priv *priv; + struct udevice *bus; uint words = bitlen >> 3; /* fixed 8-bit word length */ const uchar *txp = dout; uchar *rxp = din; uint status; int timeout; + unsigned int cs = slave->cs; - /* Setup mmap flags */ - if (flags & SPI_XFER_MMAP) { - writel(MM_SWITCH, &priv->base->memswitch); - if (priv->ctrl_mod_mmap) - ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, true); - return 0; - } else if (flags & SPI_XFER_MMAP_END) { - writel(~MM_SWITCH, &priv->base->memswitch); - if (priv->ctrl_mod_mmap) - ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, cs, false); - return 0; + bus = dev->parent; + priv = dev_get_priv(bus); + + if (cs > priv->num_cs) { + debug("invalid qspi chip select\n"); + return -EINVAL; } if (bitlen == 0) @@ -294,9 +250,9 @@ static int __ti_qspi_xfer(struct ti_qspi_priv *priv, unsigned int bitlen, } /* TODO: control from sf layer to here through dm-spi */ -#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA) -void spi_flash_copy_mmap(void *data, void *offset, size_t len) +static void ti_qspi_copy_mmap(void *data, void *offset, size_t len) { +#if defined(CONFIG_TI_EDMA3) && !defined(CONFIG_DMA) unsigned int addr = (unsigned int) (data); unsigned int edma_slot_num = 1; @@ -311,187 +267,85 @@ void spi_flash_copy_mmap(void *data, void *offset, size_t len) /* disable edma3 clocks */ disable_edma3_clocks(); - - *((unsigned int *)offset) += len; -} -#endif - -#ifndef CONFIG_DM_SPI - -static inline struct ti_qspi_priv *to_ti_qspi_priv(struct spi_slave *slave) -{ - return container_of(slave, struct ti_qspi_priv, slave); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - return 1; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* CS handled in xfer */ - return; -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - ti_qspi_cs_deactivate(priv); -} - -void spi_init(void) -{ - /* nothing to do */ -} - -static void ti_spi_setup_spi_register(struct ti_qspi_priv *priv) -{ - u32 memval = 0; - -#ifdef CONFIG_QSPI_QUAD_SUPPORT - struct spi_slave *slave = &priv->slave; - memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES | - QSPI_SETUP0_NUM_D_BYTES_8_BITS | - QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE | - QSPI_NUM_DUMMY_BITS); - slave->mode |= SPI_RX_QUAD; #else - memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES | - QSPI_SETUP0_NUM_D_BYTES_NO_BITS | - QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE | - QSPI_NUM_DUMMY_BITS; + memcpy_fromio(data, offset, len); #endif - writel(memval, &priv->base->setup0); -} - -struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, - unsigned int max_hz, unsigned int mode) -{ - struct ti_qspi_priv *priv; - -#ifdef CONFIG_AM43XX - gpio_request(CONFIG_QSPI_SEL_GPIO, "qspi_gpio"); - gpio_direction_output(CONFIG_QSPI_SEL_GPIO, 1); -#endif - - priv = spi_alloc_slave(struct ti_qspi_priv, bus, cs); - if (!priv) { - printf("SPI_error: Fail to allocate ti_qspi_priv\n"); - return NULL; - } - - priv->base = (struct ti_qspi_regs *)QSPI_BASE; - priv->mode = mode; -#if defined(CONFIG_DRA7XX) - priv->ctrl_mod_mmap = (void *)CORE_CTRL_IO; - priv->slave.memory_map = (void *)MMAP_START_ADDR_DRA; - priv->fclk = QSPI_DRA7XX_FCLK; -#else - priv->slave.memory_map = (void *)MMAP_START_ADDR_AM43x; - priv->fclk = QSPI_FCLK; -#endif - - ti_spi_set_speed(priv, max_hz); - -#ifdef CONFIG_TI_SPI_MMAP - ti_spi_setup_spi_register(priv); -#endif - - return &priv->slave; -} - -void spi_free_slave(struct spi_slave *slave) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - free(priv); -} - -int spi_claim_bus(struct spi_slave *slave) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - - debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs); - __ti_qspi_set_mode(priv, priv->mode); - return __ti_qspi_claim_bus(priv, priv->slave.cs); -} -void spi_release_bus(struct spi_slave *slave) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - - debug("%s: bus:%i cs:%i\n", __func__, priv->slave.bus, priv->slave.cs); - __ti_qspi_release_bus(priv); -} - -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, - void *din, unsigned long flags) -{ - struct ti_qspi_priv *priv = to_ti_qspi_priv(slave); - - debug("spi_xfer: bus:%i cs:%i bitlen:%i flags:%lx\n", - priv->slave.bus, priv->slave.cs, bitlen, flags); - return __ti_qspi_xfer(priv, bitlen, dout, din, flags, priv->slave.cs); + *((unsigned int *)offset) += len; } -#else /* CONFIG_DM_SPI */ - -static void __ti_qspi_setup_memorymap(struct ti_qspi_priv *priv, - struct spi_slave *slave, - bool enable) +static void ti_qspi_setup_mmap_read(struct ti_qspi_priv *priv, u8 opcode, + u8 data_nbits, u8 addr_width, + u8 dummy_bytes) { - u32 memval; - u32 mode = slave->mode & (SPI_RX_QUAD | SPI_RX_DUAL); - - if (!enable) { - writel(0, &priv->base->setup0); - return; - } - - memval = QSPI_SETUP0_NUM_A_BYTES | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS; + u32 memval = opcode; - switch (mode) { - case SPI_RX_QUAD: - memval |= QSPI_CMD_READ_QUAD; - memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS; + switch (data_nbits) { + case 4: memval |= QSPI_SETUP0_READ_QUAD; - slave->mode |= SPI_RX_QUAD; break; - case SPI_RX_DUAL: - memval |= QSPI_CMD_READ_DUAL; - memval |= QSPI_SETUP0_NUM_D_BYTES_8_BITS; + case 2: memval |= QSPI_SETUP0_READ_DUAL; break; default: - memval |= QSPI_CMD_READ; - memval |= QSPI_SETUP0_NUM_D_BYTES_NO_BITS; memval |= QSPI_SETUP0_READ_NORMAL; break; } + memval |= ((addr_width - 1) << QSPI_SETUP0_ADDR_SHIFT | + dummy_bytes << QSPI_SETUP0_DBITS_SHIFT); + writel(memval, &priv->base->setup0); } - -static int ti_qspi_set_speed(struct udevice *bus, uint max_hz) +static int ti_qspi_set_mode(struct udevice *bus, uint mode) { struct ti_qspi_priv *priv = dev_get_priv(bus); - ti_spi_set_speed(priv, max_hz); + priv->dc = 0; + if (mode & SPI_CPHA) + priv->dc |= QSPI_CKPHA(0); + if (mode & SPI_CPOL) + priv->dc |= QSPI_CKPOL(0); + if (mode & SPI_CS_HIGH) + priv->dc |= QSPI_CSPOL(0); return 0; } -static int ti_qspi_set_mode(struct udevice *bus, uint mode) +static int ti_qspi_exec_mem_op(struct spi_slave *slave, + const struct spi_mem_op *op) { - struct ti_qspi_priv *priv = dev_get_priv(bus); - return __ti_qspi_set_mode(priv, mode); + struct ti_qspi_priv *priv; + struct udevice *bus; + + bus = slave->dev->parent; + priv = dev_get_priv(bus); + u32 from = 0; + int ret = 0; + + /* Only optimize read path. */ + if (!op->data.nbytes || op->data.dir != SPI_MEM_DATA_IN || + !op->addr.nbytes || op->addr.nbytes > 4) + return -ENOTSUPP; + + /* Address exceeds MMIO window size, fall back to regular mode. */ + from = op->addr.val; + if (from + op->data.nbytes > priv->mmap_size) + return -ENOTSUPP; + + ti_qspi_setup_mmap_read(priv, op->cmd.opcode, op->data.buswidth, + op->addr.nbytes, op->dummy.nbytes); + + ti_qspi_copy_mmap((void *)op->data.buf.in, + (void *)priv->memory_map + from, op->data.nbytes); + + return ret; } static int ti_qspi_claim_bus(struct udevice *dev) { struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); - struct spi_slave *slave = dev_get_parent_priv(dev); struct ti_qspi_priv *priv; struct udevice *bus; @@ -503,42 +357,41 @@ static int ti_qspi_claim_bus(struct udevice *dev) return -EINVAL; } - __ti_qspi_setup_memorymap(priv, slave, true); - - return __ti_qspi_claim_bus(priv, slave_plat->cs); -} - -static int ti_qspi_release_bus(struct udevice *dev) -{ - struct spi_slave *slave = dev_get_parent_priv(dev); - struct ti_qspi_priv *priv; - struct udevice *bus; + writel(MM_SWITCH, &priv->base->memswitch); + if (priv->ctrl_mod_mmap) + ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, + slave_plat->cs, true); - bus = dev->parent; - priv = dev_get_priv(bus); + writel(priv->dc, &priv->base->dc); + writel(0, &priv->base->cmd); + writel(0, &priv->base->data); - __ti_qspi_setup_memorymap(priv, slave, false); - __ti_qspi_release_bus(priv); + priv->dc <<= slave_plat->cs * 8; + writel(priv->dc, &priv->base->dc); return 0; } -static int ti_qspi_xfer(struct udevice *dev, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) +static int ti_qspi_release_bus(struct udevice *dev) { - struct dm_spi_slave_platdata *slave = dev_get_parent_platdata(dev); + struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev); struct ti_qspi_priv *priv; struct udevice *bus; bus = dev->parent; priv = dev_get_priv(bus); - if (slave->cs > priv->num_cs) { - debug("invalid qspi chip select\n"); - return -EINVAL; - } + writel(~MM_SWITCH, &priv->base->memswitch); + if (priv->ctrl_mod_mmap) + ti_qspi_ctrl_mode_mmap(priv->ctrl_mod_mmap, + slave_plat->cs, false); - return __ti_qspi_xfer(priv, bitlen, dout, din, flags, slave->cs); + writel(0, &priv->base->dc); + writel(0, &priv->base->cmd); + writel(0, &priv->base->data); + writel(0, &priv->base->setup0); + + return 0; } static int ti_qspi_probe(struct udevice *bus) @@ -594,12 +447,15 @@ static int ti_qspi_ofdata_to_platdata(struct udevice *bus) struct ti_qspi_priv *priv = dev_get_priv(bus); const void *blob = gd->fdt_blob; int node = dev_of_offset(bus); + fdt_addr_t mmap_addr; + fdt_addr_t mmap_size; priv->ctrl_mod_mmap = map_syscon_chipselects(bus); priv->base = map_physmem(devfdt_get_addr(bus), sizeof(struct ti_qspi_regs), MAP_NOCACHE); - priv->memory_map = map_physmem(devfdt_get_addr_index(bus, 1), 0, - MAP_NOCACHE); + mmap_addr = devfdt_get_addr_size_index(bus, 1, &mmap_size); + priv->memory_map = map_physmem(mmap_addr, mmap_size, MAP_NOCACHE); + priv->mmap_size = mmap_size; priv->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", -1); if (priv->max_hz < 0) { @@ -614,15 +470,9 @@ static int ti_qspi_ofdata_to_platdata(struct udevice *bus) return 0; } -static int ti_qspi_child_pre_probe(struct udevice *dev) -{ - struct spi_slave *slave = dev_get_parent_priv(dev); - struct udevice *bus = dev_get_parent(dev); - struct ti_qspi_priv *priv = dev_get_priv(bus); - - slave->memory_map = priv->memory_map; - return 0; -} +static const struct spi_controller_mem_ops ti_qspi_mem_ops = { + .exec_op = ti_qspi_exec_mem_op, +}; static const struct dm_spi_ops ti_qspi_ops = { .claim_bus = ti_qspi_claim_bus, @@ -630,6 +480,7 @@ static const struct dm_spi_ops ti_qspi_ops = { .xfer = ti_qspi_xfer, .set_speed = ti_qspi_set_speed, .set_mode = ti_qspi_set_mode, + .mem_ops = &ti_qspi_mem_ops, }; static const struct udevice_id ti_qspi_ids[] = { @@ -646,6 +497,4 @@ U_BOOT_DRIVER(ti_qspi) = { .ofdata_to_platdata = ti_qspi_ofdata_to_platdata, .priv_auto_alloc_size = sizeof(struct ti_qspi_priv), .probe = ti_qspi_probe, - .child_pre_probe = ti_qspi_child_pre_probe, }; -#endif /* CONFIG_DM_SPI */ diff --git a/drivers/spi/zynqmp_gqspi.c b/drivers/spi/zynqmp_gqspi.c index da9413c066..04ea42cbcc 100644 --- a/drivers/spi/zynqmp_gqspi.c +++ b/drivers/spi/zynqmp_gqspi.c @@ -267,7 +267,7 @@ void zynqmp_qspi_set_tapdelay(struct udevice *bus, u32 baudrateval) zynqmp_mmio_read(IOU_TAPDLY_BYPASS_OFST, &tapdlybypass); tapdlybypass |= (TAP_DLY_BYPASS_LQSPI_RX_VALUE << TAP_DLY_BYPASS_LQSPI_RX_SHIFT); - } else if (reqhz < GQSPI_FREQ_100MHZ) { + } else if (reqhz <= GQSPI_FREQ_100MHZ) { zynqmp_mmio_read(IOU_TAPDLY_BYPASS_OFST, &tapdlybypass); tapdlybypass |= (TAP_DLY_BYPASS_LQSPI_RX_VALUE << TAP_DLY_BYPASS_LQSPI_RX_SHIFT); @@ -277,7 +277,7 @@ void zynqmp_qspi_set_tapdelay(struct udevice *bus, u32 baudrateval) datadlyadj |= ((GQSPI_USE_DATA_DLY << GQSPI_USE_DATA_DLY_SHIFT) | (GQSPI_DATA_DLY_ADJ_VALUE << GQSPI_DATA_DLY_ADJ_SHIFT)); - } else if (reqhz < GQSPI_FREQ_150MHZ) { + } else if (reqhz <= GQSPI_FREQ_150MHZ) { lpbkdlyadj = readl(®s->lpbkdly); lpbkdlyadj |= ((GQSPI_LPBK_DLY_ADJ_LPBK_MASK) | GQSPI_LPBK_DLY_ADJ_DLY_0); diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index 5a6080645a..37d058ebbc 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -120,12 +120,6 @@ #define CONFIG_ENV_OFFSET_REDUND 0x120000 #endif -/* SPI */ -#define CONFIG_TI_SPI_MMAP -#define CONFIG_QSPI_SEL_GPIO 48 -#define CONFIG_QSPI_QUAD_SUPPORT -#define CONFIG_TI_EDMA3 - #ifndef CONFIG_SPL_BUILD #include <environment/ti/dfu.h> #include <environment/ti/mmc.h> diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h index 48999847ee..c14b010550 100644 --- a/include/configs/am57xx_evm.h +++ b/include/configs/am57xx_evm.h @@ -92,11 +92,6 @@ #define CONFIG_SYS_SPI_ARGS_SIZE 0x80000 /* SPI SPL */ -#define CONFIG_TI_EDMA3 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 -/* SPI */ -#define CONFIG_TI_SPI_MMAP -#define CONFIG_QSPI_QUAD_SUPPORT - #endif /* __CONFIG_AM57XX_EVM_H */ diff --git a/include/configs/cl-som-am57x.h b/include/configs/cl-som-am57x.h deleted file mode 100644 index bf2bb44d48..0000000000 --- a/include/configs/cl-som-am57x.h +++ /dev/null @@ -1,148 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Configuration settings for CompuLab CL-SOM-AM57x board - * - * (C) Copyright 2016 CompuLab, Ltd. http://compulab.co.il/ - * - * Author: Dmitry Lifshitz <lifshitz@compulab.co.il> - */ - -#ifndef __CONFIG_CL_SOM_AM57X_H -#define __CONFIG_CL_SOM_AM57X_H - -#define CONSOLEDEV "ttyO2" -#define CONFIG_SYS_NS16550_COM3 UART3_BASE /* UART3 */ - -#define CONFIG_SYS_OMAP_ABE_SYSCK - -#define PARTS_DEFAULT - -#include <configs/ti_omap5_common.h> - -/* misc */ -#define CONFIG_REVISION_TAG - -/* PMIC I2C bus number */ -#define CONFIG_SYS_SPD_BUS_NUM 3 - -/* SPI Flash support */ -#define CONFIG_TI_SPI_MMAP - -/* SPI SPL defines */ -/* Offsets: 0K - SPL1, 64K - SPL2, 128K - SPL3, 192K - SPL4, 256K - U-Boot */ -#define CONFIG_SYS_SPI_U_BOOT_OFFS (256 * 1024) -#define CONFIG_SPL_SPI_SUPPORT - -/* SD/MMC RAW/FS boot */ -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 - -/* Environment */ -#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB env size */ - -#define CONFIG_ENV_SECT_SIZE (64 * 1024) -#define CONFIG_ENV_OFFSET (768 * 1024) - -/* EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_BUS 3 - -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_EEPROM_SIZE 256 - -#ifndef CONFIG_SPL_BUILD -/* SATA */ -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) -/* PCA9555 GPIO expander support */ -#define CONFIG_PCA953X -#define CONFIG_SYS_I2C_PCA953X_ADDR 0x20 -#define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x20, 16} } - -#endif /* !CONFIG_SPL_BUILD */ - -/* USB xHCI HOST */ -#define CONFIG_USB_XHCI_OMAP - -#define CONFIG_OMAP_USB3PHY1_HOST - -/* USB Networking options */ - -/* CPSW Ethernet */ -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_PHY_ATHEROS -#define CONFIG_SYS_RX_ETH_BUFFER 64 -#define PHY_ANEG_TIMEOUT 8000 - -#define CONFIG_BOOTP_DNS2 -#define CONFIG_NET_RETRY_COUNT 10 - -/* Default environment */ -#undef CONFIG_EXTRA_ENV_SETTINGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - "autoload=no\0" \ - "baudrate=115200\0" \ - "console=ttyO2,115200n8\0" \ - "bootdelay=3\0" \ - "fdtfile=am57xx-sbc-am57x.dtb\0" \ - "kernel=zImage-cl-som-am57x\0" \ - "bootscr=bootscr.img\0" \ - "displaytype=hdmi\0" \ - "bootkernel=bootz ${loadaddr} - ${fdtaddr}\0" \ - "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ - "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \ - "emmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \ - "emmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \ - "load_mmc=mmc dev ${mmcdev} && mmc rescan && " \ - "run mmcloadkernel && run mmcloadfdt\0" \ - "mmcroot=/dev/mmcblk1p2\0" \ - "mmcrootfstype=ext4 rw rootwait\0" \ - "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "mmcbootscript=setenv mmcdev 0; mmc dev ${mmcdev} && mmc rescan && " \ - "load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \ - "echo Running bootscript from MMC/SD Card ... && " \ - "source ${loadaddr}\0" \ - "mmcboot=setenv mmcdev 0 && run load_mmc && " \ - "run mmcargs && echo Booting from MMC/SD Card ... && " \ - "run bootkernel\0" \ - "emmcroot=/dev/mmcblk0p2\0" \ - "emmcrootfstype=ext4 rw rootwait\0" \ - "emmcargs=setenv bootargs console=${console} " \ - "root=${emmcroot} " \ - "rootfstype=${emmcrootfstype}\0" \ - "emmcbootscript=setenv mmcdev 1; mmc dev ${mmcdev} && mmc rescan && " \ - "load mmc ${mmcdev} ${loadaddr} ${bootscr} && " \ - "echo Running bootscript from eMMC ... && " \ - "source ${loadaddr}\0" \ - "emmcboot=setenv mmcdev 1 && run load_mmc && " \ - "run emmcargs && echo Booting from eMMC ... && " \ - "run bootkernel\0" \ - "sataroot=/dev/sda2\0" \ - "satarootfstype=ext4 rw rootwait\0" \ - "load_sata=load scsi 0 ${loadaddr} ${kernel} && " \ - "load scsi 0 ${fdtaddr} ${fdtfile}\0" \ - "sataargs=setenv bootargs console=${console} " \ - "root=${sataroot} " \ - "rootfstype=${satarootfstype}\0" \ - "satabootscript=load scsi 0 ${loadaddr} ${bootscr} && " \ - "echo Running bootscript from SATA ... && " \ - "source ${loadaddr}\0" \ - "sataboot=run load_sata && run sataargs && " \ - "echo Booting from SATA ... && " \ - "run bootkernel\0" - -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND \ - "run mmcbootscript || run mmcboot || " \ - "run satabootscript || run sataboot || " \ - "run emmcbootscript || run emmcboot" - - -#endif /* __CONFIG_CL_SOM_AM57X_H */ diff --git a/include/configs/cm_t43.h b/include/configs/cm_t43.h index ffe4a44c86..e4e37e5bbb 100644 --- a/include/configs/cm_t43.h +++ b/include/configs/cm_t43.h @@ -53,9 +53,6 @@ #define CONFIG_USB_XHCI_OMAP #define CONFIG_AM437X_USB2PHY2_HOST -/* SPI Flash support */ -#define CONFIG_TI_SPI_MMAP - /* Power */ #define CONFIG_POWER #define CONFIG_POWER_I2C diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 7441f4a69d..f6be6595fe 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -72,10 +72,6 @@ #define CONFIG_NET_RETRY_COUNT 10 #define CONFIG_PHY_TI -/* SPI */ -#define CONFIG_TI_SPI_MMAP -#define CONFIG_QSPI_QUAD_SUPPORT - /* * Default to using SPI for environment, etc. * 0x000000 - 0x040000 : QSPI.SPL (256KiB) @@ -98,7 +94,6 @@ #endif /* SPI SPL */ -#define CONFIG_TI_EDMA3 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #define CONFIG_SUPPORT_EMMC_BOOT diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index ee18260be6..a498393472 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -104,13 +104,7 @@ #define PHYS_SDRAM_0_SIZE 0x80000000 /* 2 GiB */ #ifdef CONFIG_AHCI -#define CONFIG_SCSI_AHCI_PLAT -#define CONFIG_SUNXI_AHCI #define CONFIG_SYS_64BIT_LBA -#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 -#define CONFIG_SYS_SCSI_MAX_LUN 1 -#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ - CONFIG_SYS_SCSI_MAX_LUN) #endif #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 27a8e4d490..91ae7088a5 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -108,15 +108,6 @@ # define PHY_ANEG_TIMEOUT 20000 #endif -/* EEPROM */ -#ifdef CONFIG_ZYNQMP_EEPROM -# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 -# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 -# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -# define CONFIG_SYS_EEPROM_SIZE (64 * 1024) -#endif - #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) #define CONFIG_CLOCKS diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 94177c6fcb..3ab783e3a8 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -69,7 +69,7 @@ # define CONFIG_THOR_RESET_OFF # define DFU_ALT_INFO_RAM \ "dfu_ram_info=" \ - "set dfu_alt_info " \ + "setenv dfu_alt_info " \ "${kernel_image} ram 0x3000000 0x500000\\\\;" \ "${devicetree_image} ram 0x2A00000 0x20000\\\\;" \ "${ramdisk_image} ram 0x2000000 0x600000\0" \ @@ -79,7 +79,7 @@ # if defined(CONFIG_MMC_SDHCI_ZYNQ) # define DFU_ALT_INFO_MMC \ "dfu_mmc_info=" \ - "set dfu_alt_info " \ + "setenv dfu_alt_info " \ "${kernel_image} fat 0 1\\\\;" \ "${devicetree_image} fat 0 1\\\\;" \ "${ramdisk_image} fat 0 1\0" \ @@ -227,9 +227,9 @@ "env run importbootenv; " \ "fi; " \ "fi; \0" \ - "sd_loadbootenv=set bootenv_dev mmc && " \ + "sd_loadbootenv=setenv bootenv_dev mmc && " \ "run setbootenv \0" \ - "usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv \0" \ + "usb_loadbootenv=setenv bootenv_dev usb && usb start && run setbootenv \0" \ "preboot=if test $modeboot = sdboot; then " \ "run sd_loadbootenv; " \ "echo Checking if uenvcmd is set ...; " \ diff --git a/include/dt-bindings/clock/sun8i-tcon-top.h b/include/dt-bindings/clock/sun8i-tcon-top.h new file mode 100644 index 0000000000..25164d7678 --- /dev/null +++ b/include/dt-bindings/clock/sun8i-tcon-top.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* Copyright (C) 2018 Jernej Skrabec <jernej.skrabec@siol.net> */ + +#ifndef _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ +#define _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ + +#define CLK_TCON_TOP_TV0 0 +#define CLK_TCON_TOP_TV1 1 +#define CLK_TCON_TOP_DSI 2 + +#endif /* _DT_BINDINGS_CLOCK_SUN8I_TCON_TOP_H_ */ diff --git a/include/fpga.h b/include/fpga.h index 195f0bdd57..51de5c55f8 100644 --- a/include/fpga.h +++ b/include/fpga.h @@ -41,7 +41,7 @@ typedef struct { /* typedef fpga_desc */ unsigned int blocksize; char *interface; char *dev_part; - char *filename; + const char *filename; int fstype; } fpga_fs_info; diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 31c1ba3477..5092c3fb4c 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -1555,8 +1555,6 @@ CONFIG_QE CONFIG_QEMU_MIPS CONFIG_QIXIS_I2C_ACCESS CONFIG_QSPI -CONFIG_QSPI_QUAD_SUPPORT -CONFIG_QSPI_SEL_GPIO CONFIG_QUOTA CONFIG_R7780MP CONFIG_R8A66597_BASE_ADDR @@ -1939,7 +1937,6 @@ CONFIG_STV0991 CONFIG_STV0991_HZ CONFIG_STV0991_HZ_CLOCK CONFIG_ST_SMI -CONFIG_SUNXI_AHCI CONFIG_SUNXI_GPIO CONFIG_SUNXI_MAX_FB_SIZE CONFIG_SUPERH_ON_CHIP_R8A66597 @@ -4400,7 +4397,6 @@ CONFIG_THUNDERX CONFIG_TIMESTAMP CONFIG_TIZEN CONFIG_TI_KSNAV -CONFIG_TI_SPI_MMAP CONFIG_TMU_TIMER CONFIG_TPL_PAD_TO CONFIG_TPM_TIS_BASE_ADDRESS diff --git a/test/py/tests/test_fpga.py b/test/py/tests/test_fpga.py index 798f6eed3d..e3bb7b41c7 100644 --- a/test/py/tests/test_fpga.py +++ b/test/py/tests/test_fpga.py @@ -357,6 +357,19 @@ def test_fpga_loadmk_legacy_gz(u_boot_console): @pytest.mark.buildconfigspec('cmd_fpga_loadmk') @pytest.mark.buildconfigspec('fit') @pytest.mark.buildconfigspec('cmd_echo') +def test_fpga_loadmk_fit_external(u_boot_console): + f, dev, addr, bit, bit_size = load_file_from_var(u_boot_console, 'mkimage_fit_external') + + u_boot_console.run_command('imi %x' % (addr)) + + expected_text = 'FPGA loaded successfully' + output = u_boot_console.run_command('fpga loadmk %x %x:fpga && echo %s' % (dev, addr, expected_text)) + assert expected_text in output + +@pytest.mark.buildconfigspec('cmd_fpga') +@pytest.mark.buildconfigspec('cmd_fpga_loadmk') +@pytest.mark.buildconfigspec('fit') +@pytest.mark.buildconfigspec('cmd_echo') def test_fpga_loadmk_fit(u_boot_console): f, dev, addr, bit, bit_size = load_file_from_var(u_boot_console, 'mkimage_fit') |